/// join - Join two live intervals (this, and other) together. This operation
/// is the result of a copy instruction in the source program, that occurs at
/// index 'CopyIdx' that copies from 'Other' to 'this'.
void LiveInterval::join(LiveInterval &Other, unsigned CopyIdx) {
const LiveRange *SourceLR = Other.getLiveRangeContaining(CopyIdx-1);
const LiveRange *DestLR = getLiveRangeContaining(CopyIdx);
assert(SourceLR && DestLR && "Not joining due to a copy?");
unsigned MergedSrcValIdx = SourceLR->ValId;
unsigned MergedDstValIdx = DestLR->ValId;
// Try to do the least amount of work possible. In particular, if there are
// more liverange chunks in the other set than there are in the 'this' set,
// swap sets to merge the fewest chunks in possible.
if (Other.ranges.size() > ranges.size()) {
std::swap(MergedSrcValIdx, MergedDstValIdx);
std::swap(ranges, Other.ranges);
std::swap(NumValues, Other.NumValues);
}
// Join the ranges of other into the ranges of this interval.
Ranges::iterator InsertPos = ranges.begin();
std::map<unsigned, unsigned> Dst2SrcIdxMap;
for (Ranges::iterator I = Other.ranges.begin(),
E = Other.ranges.end(); I != E; ++I) {
// Map the ValId in the other live range to the current live range.
if (I->ValId == MergedSrcValIdx)
I->ValId = MergedDstValIdx;
else {
unsigned &NV = Dst2SrcIdxMap[I->ValId];
if (NV == 0) NV = getNextValue();
I->ValId = NV;
}
InsertPos = addRangeFrom(*I, InsertPos);
}
weight += Other.weight;
}
/// isPartialRedef - Return true if the specified def at the specific index is
/// partially re-defining the specified live interval. A common case of this is
/// a definition of the sub-register.
bool LiveIntervals::isPartialRedef(SlotIndex MIIdx, MachineOperand &MO,
LiveInterval &interval) {
if (!MO.getSubReg() || MO.isEarlyClobber())
return false;
SlotIndex RedefIndex = MIIdx.getRegSlot();
const LiveRange *OldLR =
interval.getLiveRangeContaining(RedefIndex.getRegSlot(true));
MachineInstr *DefMI = getInstructionFromIndex(OldLR->valno->def);
if (DefMI != 0) {
return DefMI->findRegisterDefOperandIdx(interval.reg) != -1;
}
return false;
}
/// joinable - Two intervals are joinable if the either don't overlap at all
/// or if the destination of the copy is a single assignment value, and it
/// only overlaps with one value in the source interval.
bool LiveInterval::joinable(const LiveInterval &other, unsigned CopyIdx) const {
const LiveRange *SourceLR = other.getLiveRangeContaining(CopyIdx-1);
const LiveRange *DestLR = getLiveRangeContaining(CopyIdx);
assert(SourceLR && DestLR && "Not joining due to a copy?");
unsigned OtherValIdx = SourceLR->ValId;
unsigned ThisValIdx = DestLR->ValId;
Ranges::const_iterator i = ranges.begin();
Ranges::const_iterator ie = ranges.end();
Ranges::const_iterator j = other.ranges.begin();
Ranges::const_iterator je = other.ranges.end();
if (i->start < j->start) {
i = std::upper_bound(i, ie, j->start);
if (i != ranges.begin()) --i;
} else if (j->start < i->start) {
j = std::upper_bound(j, je, i->start);
if (j != other.ranges.begin()) --j;
}
while (i != ie && j != je) {
if (i->start == j->start) {
// If this is not the allowed value merge, we cannot join.
if (i->ValId != ThisValIdx || j->ValId != OtherValIdx)
return false;
} else if (i->start < j->start) {
if (i->end > j->start) {
if (i->ValId != ThisValIdx || j->ValId != OtherValIdx)
return false;
}
} else {
if (j->end > i->start) {
if (i->ValId != ThisValIdx || j->ValId != OtherValIdx)
return false;
}
}
if (i->end < j->end)
++i;
else
++j;
}
return true;
}
void LiveIntervals::handleVirtualRegisterDef(MachineBasicBlock *mbb,
MachineBasicBlock::iterator mi,
SlotIndex MIIdx,
MachineOperand& MO,
unsigned MOIdx,
LiveInterval &interval) {
DEBUG(dbgs() << "\t\tregister: " << PrintReg(interval.reg, tri_));
// Virtual registers may be defined multiple times (due to phi
// elimination and 2-addr elimination). Much of what we do only has to be
// done once for the vreg. We use an empty interval to detect the first
// time we see a vreg.
LiveVariables::VarInfo& vi = lv_->getVarInfo(interval.reg);
if (interval.empty()) {
// Get the Idx of the defining instructions.
SlotIndex defIndex = MIIdx.getRegSlot(MO.isEarlyClobber());
// Make sure the first definition is not a partial redefinition. Add an
// <imp-def> of the full register.
// FIXME: LiveIntervals shouldn't modify the code like this. Whoever
// created the machine instruction should annotate it with <undef> flags
// as needed. Then we can simply assert here. The REG_SEQUENCE lowering
// is the main suspect.
if (MO.getSubReg()) {
mi->addRegisterDefined(interval.reg);
// Mark all defs of interval.reg on this instruction as reading <undef>.
for (unsigned i = MOIdx, e = mi->getNumOperands(); i != e; ++i) {
MachineOperand &MO2 = mi->getOperand(i);
if (MO2.isReg() && MO2.getReg() == interval.reg && MO2.getSubReg())
MO2.setIsUndef();
}
}
MachineInstr *CopyMI = NULL;
if (mi->isCopyLike()) {
CopyMI = mi;
}
VNInfo *ValNo = interval.getNextValue(defIndex, CopyMI, VNInfoAllocator);
assert(ValNo->id == 0 && "First value in interval is not 0?");
// Loop over all of the blocks that the vreg is defined in. There are
// two cases we have to handle here. The most common case is a vreg
// whose lifetime is contained within a basic block. In this case there
// will be a single kill, in MBB, which comes after the definition.
if (vi.Kills.size() == 1 && vi.Kills[0]->getParent() == mbb) {
// FIXME: what about dead vars?
SlotIndex killIdx;
if (vi.Kills[0] != mi)
killIdx = getInstructionIndex(vi.Kills[0]).getRegSlot();
else
killIdx = defIndex.getDeadSlot();
// If the kill happens after the definition, we have an intra-block
// live range.
if (killIdx > defIndex) {
assert(vi.AliveBlocks.empty() &&
"Shouldn't be alive across any blocks!");
LiveRange LR(defIndex, killIdx, ValNo);
interval.addRange(LR);
DEBUG(dbgs() << " +" << LR << "\n");
return;
}
}
// The other case we handle is when a virtual register lives to the end
// of the defining block, potentially live across some blocks, then is
// live into some number of blocks, but gets killed. Start by adding a
// range that goes from this definition to the end of the defining block.
LiveRange NewLR(defIndex, getMBBEndIdx(mbb), ValNo);
DEBUG(dbgs() << " +" << NewLR);
interval.addRange(NewLR);
bool PHIJoin = lv_->isPHIJoin(interval.reg);
if (PHIJoin) {
// A phi join register is killed at the end of the MBB and revived as a new
// valno in the killing blocks.
assert(vi.AliveBlocks.empty() && "Phi join can't pass through blocks");
DEBUG(dbgs() << " phi-join");
ValNo->setHasPHIKill(true);
} else {
// Iterate over all of the blocks that the variable is completely
// live in, adding [insrtIndex(begin), instrIndex(end)+4) to the
// live interval.
for (SparseBitVector<>::iterator I = vi.AliveBlocks.begin(),
E = vi.AliveBlocks.end(); I != E; ++I) {
MachineBasicBlock *aliveBlock = mf_->getBlockNumbered(*I);
LiveRange LR(getMBBStartIdx(aliveBlock), getMBBEndIdx(aliveBlock), ValNo);
interval.addRange(LR);
DEBUG(dbgs() << " +" << LR);
}
}
// Finally, this virtual register is live from the start of any killing
// block to the 'use' slot of the killing instruction.
for (unsigned i = 0, e = vi.Kills.size(); i != e; ++i) {
MachineInstr *Kill = vi.Kills[i];
SlotIndex Start = getMBBStartIdx(Kill->getParent());
SlotIndex killIdx = getInstructionIndex(Kill).getRegSlot();
// Create interval with one of a NEW value number. Note that this value
// number isn't actually defined by an instruction, weird huh? :)
if (PHIJoin) {
assert(getInstructionFromIndex(Start) == 0 &&
"PHI def index points at actual instruction.");
ValNo = interval.getNextValue(Start, 0, VNInfoAllocator);
ValNo->setIsPHIDef(true);
}
LiveRange LR(Start, killIdx, ValNo);
interval.addRange(LR);
DEBUG(dbgs() << " +" << LR);
}
} else {
if (MultipleDefsBySameMI(*mi, MOIdx))
// Multiple defs of the same virtual register by the same instruction.
// e.g. %reg1031:5<def>, %reg1031:6<def> = VLD1q16 %reg1024<kill>, ...
// This is likely due to elimination of REG_SEQUENCE instructions. Return
// here since there is nothing to do.
return;
// If this is the second time we see a virtual register definition, it
// must be due to phi elimination or two addr elimination. If this is
// the result of two address elimination, then the vreg is one of the
// def-and-use register operand.
// It may also be partial redef like this:
// 80 %reg1041:6<def> = VSHRNv4i16 %reg1034<kill>, 12, pred:14, pred:%reg0
// 120 %reg1041:5<def> = VSHRNv4i16 %reg1039<kill>, 12, pred:14, pred:%reg0
bool PartReDef = isPartialRedef(MIIdx, MO, interval);
if (PartReDef || mi->isRegTiedToUseOperand(MOIdx)) {
// If this is a two-address definition, then we have already processed
// the live range. The only problem is that we didn't realize there
// are actually two values in the live interval. Because of this we
// need to take the LiveRegion that defines this register and split it
// into two values.
SlotIndex RedefIndex = MIIdx.getRegSlot(MO.isEarlyClobber());
const LiveRange *OldLR =
interval.getLiveRangeContaining(RedefIndex.getRegSlot(true));
VNInfo *OldValNo = OldLR->valno;
SlotIndex DefIndex = OldValNo->def.getRegSlot();
// Delete the previous value, which should be short and continuous,
// because the 2-addr copy must be in the same MBB as the redef.
interval.removeRange(DefIndex, RedefIndex);
// The new value number (#1) is defined by the instruction we claimed
// defined value #0.
VNInfo *ValNo = interval.createValueCopy(OldValNo, VNInfoAllocator);
// Value#0 is now defined by the 2-addr instruction.
OldValNo->def = RedefIndex;
OldValNo->setCopy(0);
// A re-def may be a copy. e.g. %reg1030:6<def> = VMOVD %reg1026, ...
if (PartReDef && mi->isCopyLike())
OldValNo->setCopy(&*mi);
// Add the new live interval which replaces the range for the input copy.
LiveRange LR(DefIndex, RedefIndex, ValNo);
DEBUG(dbgs() << " replace range with " << LR);
interval.addRange(LR);
// If this redefinition is dead, we need to add a dummy unit live
// range covering the def slot.
if (MO.isDead())
interval.addRange(LiveRange(RedefIndex, RedefIndex.getDeadSlot(),
OldValNo));
DEBUG({
dbgs() << " RESULT: ";
interval.print(dbgs(), tri_);
});
} else if (lv_->isPHIJoin(interval.reg)) {