static void MakeTwistedCubeFace( ON_Brep& brep,
int si, // index of 3d surface
int s_dir, // orientation of surface with respect to brep
//int vSWi, int vSEi, int vNEi, int vNWi, // Indices of corner vertices listed in SW,SE,NW,NE order
int eSi, // index of edge on south side of surface
int eS_dir, // orientation of edge with respect to surface trim
int eEi, // index of edge on south side of surface
int eE_dir, // orientation of edge with respect to surface trim
int eNi, // index of edge on south side of surface
int eN_dir, // orientation of edge with respect to surface trim
int eWi, // index of edge on south side of surface
int eW_dir // orientation of edge with respect to surface trim
)
{
ON_BrepFace& face = brep.NewFace(si);
MakeTwistedCubeTrimmingLoop( brep, face,
//vSWi, vSEi, vNEi, vNWi,
eSi, eS_dir,
eEi, eE_dir,
eNi, eN_dir,
eWi, eW_dir
);
face.m_bRev = (s_dir == -1);
}
static void MakeTrimmedFace( ON_Brep& brep,
int si, // index of 3d surface
int s_dir, // orientation of surface with respect to surfce
int v0, int v1, int v2, // Indices of corner vertices
int e0, // index of first edge
int e0_dir, // orientation of edge
int e1, // index of second edge
int e1_dir, // orientation of edge
int e2, // index of third edge
int e2_dir // orientation of edge
)
{
//Add new face to brep
ON_BrepFace& face = brep.NewFace(si);
//Create loop and trims for the face
MakeTrimmingLoop( brep, face,
v0, v1, v2,
e0, e0_dir,
e1, e1_dir,
e2, e2_dir
);
//Set face direction relative to surface direction
face.m_bRev = (s_dir == -1);
}
static
bool ON_BrepExtrudeHelper_MakeCap(
ON_Brep& brep,
int bottom_loop_index,
const ON_3dVector path_vector,
const int* side_face_index
)
{
bool bCap = true;
// make cap
if ( !ON_BrepExtrudeHelper_CheckLoop( brep, bottom_loop_index ) )
return false;
brep.m_F.Reserve(brep.m_F.Count() + 1);
brep.m_L.Reserve(brep.m_L.Count() + 1);
const ON_BrepLoop& bottom_loop = brep.m_L[bottom_loop_index];
const ON_BrepFace& bottom_face = brep.m_F[bottom_loop.m_fi];
const ON_Surface* bottom_surface = bottom_face.SurfaceOf();
ON_Surface* top_surface = bottom_surface->Duplicate();
top_surface->Translate( path_vector );
int top_surface_index = brep.AddSurface( top_surface );
ON_BrepFace& top_face = brep.NewFace( top_surface_index );
bCap = ON_BrepExtrudeHelper_MakeTopLoop( brep, top_face, bottom_loop_index, path_vector, side_face_index );
if ( bCap )
{
ON_BrepLoop& top_loop = brep.m_L[brep.m_L.Count()-1];
if ( bottom_loop.m_type == ON_BrepLoop::inner )
{
// we capped an inner boundary
// top_loop.m_type = ON_BrepLoop::outer; // done in ON_BrepExtrudeHelper_MakeTopLoop
brep.FlipLoop(top_loop);
}
else if ( bottom_loop.m_type == ON_BrepLoop::outer )
{
// we capped an outer boundary
// top_loop.m_type = ON_BrepLoop::outer; // done in ON_BrepExtrudeHelper_MakeTopLoop
brep.FlipFace(top_face);
}
}
else
{
// delete partially made cap face
brep.DeleteFace( top_face, false );
delete brep.m_S[top_surface_index];
brep.m_S[top_surface_index] = 0;
}
return bCap;
}
int ON_BrepExtrudeEdge(
ON_Brep& brep,
int edge_index,
const ON_Curve& path_curve
)
{
ON_3dVector path_vector;
if ( edge_index < 0 && edge_index >= brep.m_E.Count() )
return false;
if ( !ON_BrepExtrudeHelper_CheckPathCurve(path_curve,path_vector) )
return false;
// make sides
bool bRev = false;
ON_SumSurface* sum_srf = ON_BrepExtrudeHelper_MakeSumSrf(
path_curve, brep.m_E[edge_index], bRev );
if ( !sum_srf )
return false;
int vid[4], eid[4], bRev3d[4];
vid[0] = brep.m_E[edge_index].m_vi[bRev?0:1];
vid[1] = brep.m_E[edge_index].m_vi[bRev?1:0];
vid[2] = -1;
vid[3] = -1;
eid[0] = edge_index; // "south side edge"
eid[1] = -1;
eid[2] = -1;
eid[3] = -1;
bRev3d[0] = bRev?0:1;
bRev3d[1] = 0;
bRev3d[2] = 0;
bRev3d[3] = 0;
return brep.NewFace( sum_srf, vid, eid, bRev3d ) ? true : false;
}
void
MakeTwistedCubeFace(ON_Brep& brep,
int surf,
int orientation,
int v0, int v1, int v2, int v3, // the indices of corner vertices
int e0, int eo0, // edge index + orientation
int e1, int eo1,
int e2, int eo2,
int e3, int eo3)
{
ON_BrepFace& face = brep.NewFace(surf);
MakeTwistedCubeTrimmingLoop(brep,
face,
v0, v1, v2, v3,
e0, eo0,
e1, eo1,
e2, eo2,
e3, eo3);
// should the normal be reversed?
face.m_bRev = (orientation == -1);
}
/* TODO - Need to find a more compact, efficient way to
* do this - shouldn't need 24 3d curves... */
ON_Brep *
Cobb_Sphere(double UNUSED(radius), ON_3dPoint *UNUSED(origin))
{
ON_Brep *b = ON_Brep::New();
// Patch 1 of 6
ON_BezierSurface *b1 = ON_CobbSphereFace(0, 0);
ON_NurbsSurface *p1_nurb = ON_NurbsSurface::New();
b1->GetNurbForm(*p1_nurb);
b->NewFace(*p1_nurb);
// Patch 2 of 6
ON_BezierSurface *b2 = ON_CobbSphereFace(90, 0);
ON_NurbsSurface *p2_nurb = ON_NurbsSurface::New();
b2->GetNurbForm(*p2_nurb);
b->NewFace(*p2_nurb);
// Patch 3 of 6
ON_BezierSurface *b3 = ON_CobbSphereFace(180, 0);
ON_NurbsSurface *p3_nurb = ON_NurbsSurface::New();
b3->GetNurbForm(*p3_nurb);
b->NewFace(*p3_nurb);
// Patch 4 of 6
ON_BezierSurface *b4 = ON_CobbSphereFace(270, 0);
ON_NurbsSurface *p4_nurb = ON_NurbsSurface::New();
b4->GetNurbForm(*p4_nurb);
b->NewFace(*p4_nurb);
// Patch 5 of 6
ON_BezierSurface *b5 = ON_CobbSphereFace(90, 90);
ON_NurbsSurface *p5_nurb = ON_NurbsSurface::New();
b5->GetNurbForm(*p5_nurb);
b->NewFace(*p5_nurb);
// Patch 6 of 6
ON_BezierSurface *b6 = ON_CobbSphereFace(90, 270);
ON_NurbsSurface *p6_nurb = ON_NurbsSurface::New();
b6->GetNurbForm(*p6_nurb);
b->NewFace(*p6_nurb);
b->Standardize();
b->Compact();
return b;
}
int ON_BrepConeEdge(
ON_Brep& brep,
int edge_index,
ON_3dPoint apex_point
)
{
//ON_3dVector path_vector;
if ( edge_index < 0 && edge_index >= brep.m_E.Count() )
return false;
// make sides
ON_NurbsSurface* cone_srf = ON_BrepExtrudeHelper_MakeConeSrf(
apex_point, brep.m_E[edge_index], false );
if ( !cone_srf )
return false;
int vid[4], eid[4], bRev3d[4];
vid[0] = brep.m_E[edge_index].m_vi[0];
vid[1] = brep.m_E[edge_index].m_vi[1];
vid[2] = -1;
vid[3] = -1;
eid[0] = edge_index;
eid[1] = -1;
eid[2] = -1;
eid[3] = -1;
bRev3d[0] = 0;
bRev3d[1] = 0;
bRev3d[2] = 0;
bRev3d[3] = 0;
return brep.NewFace( cone_srf, vid, eid, bRev3d ) ? true : false;
}
static ON_Brep *
generate_brep(int count, ON_3dPoint *points)
{
ON_Brep *brep = new ON_Brep();
/* make an arb8 */
// VERTICES
for (int i=0; i<count; i++) {
brep->NewVertex(points[i], SMALL_FASTF);
}
ON_3dPoint p8 = ON_3dPoint(-1.0, 0.0, -1.0);
ON_3dPoint p9 = ON_3dPoint(2.0, 0.0, -1.0);
ON_3dPoint p10 = ON_3dPoint(2.0, 0.0, 3.5);
ON_3dPoint p11 = ON_3dPoint(-1.0, 0.0, 3.5);
brep->NewVertex(p8, SMALL_FASTF); // 8
brep->NewVertex(p9, SMALL_FASTF); // 9
brep->NewVertex(p10, SMALL_FASTF); // 10
brep->NewVertex(p11, SMALL_FASTF); // 11
// LEFT SEGMENTS
// 0
ON_Curve* segment01 = new ON_LineCurve(points[0], points[1]);
segment01->SetDomain(0.0, 1.0);
brep->m_C3.Append(segment01);
// 1
ON_Curve* segment12 = new ON_LineCurve(points[1], points[2]);
segment12->SetDomain(0.0, 1.0);
brep->m_C3.Append(segment12);
// 2
ON_Curve* segment23 = new ON_LineCurve(points[2], points[3]);
segment23->SetDomain(0.0, 1.0);
brep->m_C3.Append(segment23);
// 3
ON_Curve* segment30 = new ON_LineCurve(points[3], points[0]);
segment30->SetDomain(0.0, 1.0);
brep->m_C3.Append(segment30);
// RIGHT SEGMENTS
// 4
ON_Curve* segment45 = new ON_LineCurve(points[5], points[4]);
segment45->SetDomain(0.0, 1.0);
brep->m_C3.Append(segment45);
// 5
ON_Curve* segment56 = new ON_LineCurve(points[6], points[5]);
segment56->SetDomain(0.0, 1.0);
brep->m_C3.Append(segment56);
// 6
ON_Curve* segment67 = new ON_LineCurve(points[7], points[6]);
segment67->SetDomain(0.0, 1.0);
brep->m_C3.Append(segment67);
// 7
ON_Curve* segment74 = new ON_LineCurve(points[4], points[7]);
segment74->SetDomain(0.0, 1.0);
brep->m_C3.Append(segment74);
// HORIZONTAL SEGMENTS
// 8
ON_Curve* segment04 = new ON_LineCurve(points[0], points[4]);
segment04->SetDomain(0.0, 1.0);
brep->m_C3.Append(segment04);
// 9
ON_Curve* segment51 = new ON_LineCurve(points[5], points[1]);
segment51->SetDomain(0.0, 1.0);
brep->m_C3.Append(segment51);
// 10
ON_Curve* segment26 = new ON_LineCurve(points[2], points[6]);
segment26->SetDomain(0.0, 1.0);
brep->m_C3.Append(segment26);
// 11
ON_Curve* segment73 = new ON_LineCurve(points[7], points[3]);
segment73->SetDomain(0.0, 1.0);
brep->m_C3.Append(segment73);
/* XXX */
// 12
ON_Curve* segment01prime = new ON_LineCurve(p8, p9);
segment01prime->SetDomain(0.0, 1.0);
brep->m_C3.Append(segment01prime);
// 13
ON_Curve* segment12prime = new ON_LineCurve(p9, p10);
segment12prime->SetDomain(0.0, 1.0);
brep->m_C3.Append(segment12prime);
// 14
ON_Curve* segment23prime = new ON_LineCurve(p10, p11);
segment23prime->SetDomain(0.0, 1.0);
brep->m_C3.Append(segment23prime);
// 15
ON_Curve* segment30prime = new ON_LineCurve(p11, p8);
segment30prime->SetDomain(0.0, 1.0);
brep->m_C3.Append(segment30prime);
// SURFACES
ON_NurbsSurface* surf0123 = new ON_NurbsSurface(3 /*dimension*/, 0 /*nonrational*/, 2 /*u*/, 2 /*v*/, 2 /*#u*/, 2 /*#v*/);
surf0123->SetKnot(0, 0, 0.0); surf0123->SetKnot(0, 1, 1.0); surf0123->SetKnot(1, 0, 0.0); surf0123->SetKnot(1, 1, 1.0);
surf0123->SetCV(0, 0, points[0]);
surf0123->SetCV(1, 0, points[1]);
surf0123->SetCV(1, 1, points[2]);
surf0123->SetCV(0, 1, points[3]);
brep->m_S.Append(surf0123); /* 0 */
ON_NurbsSurface* surf4765 = new ON_NurbsSurface(3 /*dimension*/, 0 /*nonrational*/, 2 /*u*/, 2 /*v*/, 2 /*#u*/, 2 /*#v*/);
surf4765->SetKnot(0, 0, 0.0); surf4765->SetKnot(0, 1, 1.0); surf4765->SetKnot(1, 0, 0.0); surf4765->SetKnot(1, 1, 1.0);
surf4765->SetCV(0, 0, points[4]);
surf4765->SetCV(1, 0, points[7]);
surf4765->SetCV(1, 1, points[6]);
surf4765->SetCV(0, 1, points[5]);
brep->m_S.Append(surf4765); /* 1 */
ON_NurbsSurface* surf0451 = new ON_NurbsSurface(3 /*dimension*/, 0 /*nonrational*/, 2 /*u*/, 2 /*v*/, 2 /*#u*/, 2 /*#v*/);
surf0451->SetKnot(0, 0, 0.0); surf0451->SetKnot(0, 1, 1.0); surf0451->SetKnot(1, 0, 0.0); surf0451->SetKnot(1, 1, 1.0);
surf0451->SetCV(0, 0, points[0]);
surf0451->SetCV(1, 0, points[4]);
surf0451->SetCV(1, 1, points[5]);
surf0451->SetCV(0, 1, points[1]);
brep->m_S.Append(surf0451); /* 2 */
ON_NurbsSurface* surf2673 = new ON_NurbsSurface(3 /*dimension*/, 0 /*nonrational*/, 2 /*u*/, 2 /*v*/, 2 /*#u*/, 2 /*#v*/);
surf2673->SetKnot(0, 0, 0.0); surf2673->SetKnot(0, 1, 1.0); surf2673->SetKnot(1, 0, 0.0); surf2673->SetKnot(1, 1, 1.0);
surf2673->SetCV(0, 0, points[2]);
surf2673->SetCV(1, 0, points[6]);
surf2673->SetCV(1, 1, points[7]);
surf2673->SetCV(0, 1, points[3]);
brep->m_S.Append(surf2673); /* 3 */
ON_NurbsSurface* surf1562 = new ON_NurbsSurface(3 /*dimension*/, 0 /*nonrational*/, 2 /*u*/, 2 /*v*/, 2 /*#u*/, 2 /*#v*/);
surf1562->SetKnot(0, 0, 0.0); surf1562->SetKnot(0, 1, 1.0); surf1562->SetKnot(1, 0, 0.0); surf1562->SetKnot(1, 1, 1.0);
surf1562->SetCV(0, 0, points[1]);
surf1562->SetCV(1, 0, points[5]);
surf1562->SetCV(1, 1, points[6]);
surf1562->SetCV(0, 1, points[2]);
brep->m_S.Append(surf1562); /* 4 */
ON_NurbsSurface* surf0374 = new ON_NurbsSurface(3 /*dimension*/, 0 /*nonrational*/, 2 /*u*/, 2 /*v*/, 2 /*#u*/, 2 /*#v*/);
surf0374->SetKnot(0, 0, 0.0); surf0374->SetKnot(0, 1, 1.0); surf0374->SetKnot(1, 0, 0.0); surf0374->SetKnot(1, 1, 1.0);
surf0374->SetCV(0, 0, points[0]);
surf0374->SetCV(1, 0, points[3]);
surf0374->SetCV(1, 1, points[7]);
surf0374->SetCV(0, 1, points[4]);
brep->m_S.Append(surf0374); /* 5 */
// TRIM CURVES
ON_Curve* trimcurve01 = new ON_LineCurve(ON_2dPoint(0, 0), ON_2dPoint(1, 0));
trimcurve01->SetDomain(0.0, 1.0);
brep->m_C2.Append(trimcurve01); /* 0 */
ON_Curve* trimcurve12 = new ON_LineCurve(ON_2dPoint(1, 0), ON_2dPoint(1, 1));
trimcurve12->SetDomain(0.0, 1.0);
brep->m_C2.Append(trimcurve12); /* 1 */
ON_Curve* trimcurve23 = new ON_LineCurve(ON_2dPoint(1, 1), ON_2dPoint(0, 1));
trimcurve23->SetDomain(0.0, 1.0);
brep->m_C2.Append(trimcurve23); /* 2 */
ON_Curve* trimcurve30 = new ON_LineCurve(ON_2dPoint(0, 1), ON_2dPoint(0, 0));
trimcurve30->SetDomain(0.0, 1.0);
brep->m_C2.Append(trimcurve30); /* 3 */
// EDGES
/* C3 curve */
// left face edges
brep->NewEdge(brep->m_V[0], brep->m_V[1], 0, NULL, SMALL_FASTF); /* 0 */
brep->NewEdge(brep->m_V[1], brep->m_V[2], 1, NULL, SMALL_FASTF); /* 1 */
brep->NewEdge(brep->m_V[2], brep->m_V[3], 2, NULL, SMALL_FASTF); /* 2 */
brep->NewEdge(brep->m_V[3], brep->m_V[0], 3, NULL, SMALL_FASTF); /* 3 */
// right face edges
brep->NewEdge(brep->m_V[5], brep->m_V[4], 4, NULL, SMALL_FASTF); /* 4 */
brep->NewEdge(brep->m_V[6], brep->m_V[5], 5, NULL, SMALL_FASTF); /* 5 */
brep->NewEdge(brep->m_V[7], brep->m_V[6], 6, NULL, SMALL_FASTF); /* 6 */
brep->NewEdge(brep->m_V[4], brep->m_V[7], 7, NULL, SMALL_FASTF); /* 7 */
// horizontal face edges
brep->NewEdge(brep->m_V[0], brep->m_V[4], 8, NULL, SMALL_FASTF); /* 8 */
brep->NewEdge(brep->m_V[5], brep->m_V[1], 9, NULL, SMALL_FASTF); /* 9 */
brep->NewEdge(brep->m_V[2], brep->m_V[6], 10, NULL, SMALL_FASTF); /* 10 */
brep->NewEdge(brep->m_V[7], brep->m_V[3], 11, NULL, SMALL_FASTF); /* 11 */
// XXX
brep->NewEdge(brep->m_V[8], brep->m_V[9], 12, NULL, SMALL_FASTF); /* 12 */
brep->NewEdge(brep->m_V[9], brep->m_V[10], 13, NULL, SMALL_FASTF); /* 13 */
brep->NewEdge(brep->m_V[10], brep->m_V[11], 14, NULL, SMALL_FASTF); /* 14 */
brep->NewEdge(brep->m_V[11], brep->m_V[8], 15, NULL, SMALL_FASTF); /* 15 */
// FACES
ON_BrepFace& face0123 = brep->NewFace(0);
ON_BrepLoop& loop0123 = brep->NewLoop(ON_BrepLoop::outer, face0123); /* 0 */
ON_BrepTrim& trim01 = brep->NewTrim(brep->m_E[0], false, loop0123, 0 /* trim */); /* m_T[0] */
trim01.m_iso = ON_Surface::S_iso;
trim01.m_type = ON_BrepTrim::mated;
trim01.m_tolerance[0] = SMALL_FASTF;
trim01.m_tolerance[1] = SMALL_FASTF;
ON_BrepTrim& trim12 = brep->NewTrim(brep->m_E[1], false, loop0123, 1 /* trim */); /* 1 */
trim12.m_iso = ON_Surface::E_iso;
trim12.m_type = ON_BrepTrim::mated;
trim12.m_tolerance[0] = SMALL_FASTF;
trim12.m_tolerance[1] = SMALL_FASTF;
ON_BrepTrim& trim23 = brep->NewTrim(brep->m_E[2], false, loop0123, 2 /* trim */); /* 2 */
trim23.m_iso = ON_Surface::N_iso;
trim23.m_type = ON_BrepTrim::mated;
trim23.m_tolerance[0] = SMALL_FASTF;
trim23.m_tolerance[1] = SMALL_FASTF;
ON_BrepTrim& trim30 = brep->NewTrim(brep->m_E[3], false, loop0123, 3 /* trim */); /* 3 */
trim30.m_iso = ON_Surface::W_iso;
trim30.m_type = ON_BrepTrim::mated;
trim30.m_tolerance[0] = SMALL_FASTF;
trim30.m_tolerance[1] = SMALL_FASTF;
ON_BrepFace& face4765 = brep->NewFace(1 /* surfaceID */);
ON_BrepLoop& loop4765 = brep->NewLoop(ON_BrepLoop::outer, face4765); /* 1 */
ON_BrepTrim& trim47 = brep->NewTrim(brep->m_E[7], false, loop4765, 0 /* trim */); /* 4 */
trim47.m_iso = ON_Surface::S_iso;
trim47.m_type = ON_BrepTrim::mated;
trim47.m_tolerance[0] = SMALL_FASTF;
trim47.m_tolerance[1] = SMALL_FASTF;
ON_BrepTrim& trim76 = brep->NewTrim(brep->m_E[6], false, loop4765, 1 /* trim */); /* 5 */
trim76.m_iso = ON_Surface::E_iso;
trim76.m_type = ON_BrepTrim::mated;
trim76.m_tolerance[0] = SMALL_FASTF;
trim76.m_tolerance[1] = SMALL_FASTF;
ON_BrepTrim& trim65 = brep->NewTrim(brep->m_E[5], false, loop4765, 2 /* trim */); /* 6 */
trim65.m_iso = ON_Surface::N_iso;
trim65.m_type = ON_BrepTrim::mated;
trim65.m_tolerance[0] = SMALL_FASTF;
trim65.m_tolerance[1] = SMALL_FASTF;
ON_BrepTrim& trim54 = brep->NewTrim(brep->m_E[4], false, loop4765, 3 /* trim */); /* 7 */
trim54.m_iso = ON_Surface::W_iso;
trim54.m_type = ON_BrepTrim::mated;
trim54.m_tolerance[0] = SMALL_FASTF;
trim54.m_tolerance[1] = SMALL_FASTF;
ON_BrepFace& face0451 = brep->NewFace(2);
ON_BrepLoop& loop0451 = brep->NewLoop(ON_BrepLoop::outer, face0451); /* 2 */
ON_BrepTrim& trim04 = brep->NewTrim(brep->m_E[8], false, loop0451, 0 /* trim */); /* 8 */
trim04.m_iso = ON_Surface::S_iso;
trim04.m_type = ON_BrepTrim::mated;
trim04.m_tolerance[0] = SMALL_FASTF;
trim04.m_tolerance[1] = SMALL_FASTF;
ON_BrepTrim& trim45 = brep->NewTrim(brep->m_E[4], true, loop0451, 1 /* trim */); /* 9 */
trim45.m_iso = ON_Surface::E_iso;
trim45.m_type = ON_BrepTrim::mated;
trim45.m_tolerance[0] = SMALL_FASTF;
trim45.m_tolerance[1] = SMALL_FASTF;
ON_BrepTrim& trim51 = brep->NewTrim(brep->m_E[9], false, loop0451, 2 /* trim */); /* 10 */
trim51.m_iso = ON_Surface::N_iso;
trim51.m_type = ON_BrepTrim::mated;
trim51.m_tolerance[0] = SMALL_FASTF;
trim51.m_tolerance[1] = SMALL_FASTF;
ON_BrepTrim& trim10 = brep->NewTrim(brep->m_E[0], true, loop0451, 3 /* trim */); /* 11 */
trim10.m_iso = ON_Surface::W_iso;
trim10.m_type = ON_BrepTrim::mated;
trim10.m_tolerance[0] = SMALL_FASTF;
trim10.m_tolerance[1] = SMALL_FASTF;
ON_BrepFace& face2673 = brep->NewFace(3);
ON_BrepLoop& loop2673 = brep->NewLoop(ON_BrepLoop::outer, face2673); /* 3 */
ON_BrepTrim& trim26 = brep->NewTrim(brep->m_E[10], false, loop2673, 0 /* trim */); /* 12 */
trim26.m_iso = ON_Surface::S_iso;
trim26.m_type = ON_BrepTrim::mated;
trim26.m_tolerance[0] = SMALL_FASTF;
trim26.m_tolerance[1] = SMALL_FASTF;
ON_BrepTrim& trim67 = brep->NewTrim(brep->m_E[6], true, loop2673, 1 /* trim */); /* 13 */
trim67.m_iso = ON_Surface::E_iso;
trim67.m_type = ON_BrepTrim::mated;
trim67.m_tolerance[0] = SMALL_FASTF;
trim67.m_tolerance[1] = SMALL_FASTF;
ON_BrepTrim& trim73 = brep->NewTrim(brep->m_E[11], false, loop2673, 2 /* trim */); /* 14 */
trim73.m_iso = ON_Surface::N_iso;
trim73.m_type = ON_BrepTrim::mated;
trim73.m_tolerance[0] = SMALL_FASTF;
trim73.m_tolerance[1] = SMALL_FASTF;
ON_BrepTrim& trim32 = brep->NewTrim(brep->m_E[2], true, loop2673, 3 /* trim */); /* 15 */
trim32.m_iso = ON_Surface::W_iso;
trim32.m_type = ON_BrepTrim::mated;
trim32.m_tolerance[0] = SMALL_FASTF;
trim32.m_tolerance[1] = SMALL_FASTF;
ON_BrepFace& face1562 = brep->NewFace(4);
ON_BrepLoop& loop1562 = brep->NewLoop(ON_BrepLoop::outer, face1562); /* 4 */
ON_BrepTrim& trim15 = brep->NewTrim(brep->m_E[9], true, loop1562, 0 /* trim */); /* 16 */
trim15.m_iso = ON_Surface::S_iso;
trim15.m_type = ON_BrepTrim::mated;
trim15.m_tolerance[0] = SMALL_FASTF;
trim15.m_tolerance[1] = SMALL_FASTF;
ON_BrepTrim& trim56 = brep->NewTrim(brep->m_E[5], true, loop1562, 1 /* trim */); /* 17 */
trim56.m_iso = ON_Surface::E_iso;
trim56.m_type = ON_BrepTrim::mated;
trim56.m_tolerance[0] = SMALL_FASTF;
trim56.m_tolerance[1] = SMALL_FASTF;
ON_BrepTrim& trim62 = brep->NewTrim(brep->m_E[10], true, loop1562, 2 /* trim */); /* 18 */
trim62.m_iso = ON_Surface::N_iso;
trim62.m_type = ON_BrepTrim::mated;
trim62.m_tolerance[0] = SMALL_FASTF;
trim62.m_tolerance[1] = SMALL_FASTF;
ON_BrepTrim& trim21 = brep->NewTrim(brep->m_E[1], true, loop1562, 3 /* trim */); /* 19 */
trim21.m_iso = ON_Surface::W_iso;
trim21.m_type = ON_BrepTrim::mated;
trim21.m_tolerance[0] = SMALL_FASTF;
trim21.m_tolerance[1] = SMALL_FASTF;
ON_BrepFace& face0374 = brep->NewFace(5);
ON_BrepLoop& loop0374 = brep->NewLoop(ON_BrepLoop::outer, face0374); /* 5 */
ON_BrepTrim& trim03 = brep->NewTrim(brep->m_E[3], true, loop0374, 0 /* trim */); /* 20 */
trim03.m_iso = ON_Surface::S_iso;
trim03.m_type = ON_BrepTrim::mated;
trim03.m_tolerance[0] = SMALL_FASTF;
trim03.m_tolerance[1] = SMALL_FASTF;
ON_BrepTrim& trim37 = brep->NewTrim(brep->m_E[11], true, loop0374, 1 /* trim */); /* 21 */
trim37.m_iso = ON_Surface::E_iso;
trim37.m_type = ON_BrepTrim::mated;
trim37.m_tolerance[0] = SMALL_FASTF;
trim37.m_tolerance[1] = SMALL_FASTF;
ON_BrepTrim& trim74 = brep->NewTrim(brep->m_E[7], true, loop0374, 2 /* trim */); /* 22 */
trim74.m_iso = ON_Surface::N_iso;
trim74.m_type = ON_BrepTrim::mated;
trim74.m_tolerance[0] = SMALL_FASTF;
trim74.m_tolerance[1] = SMALL_FASTF;
ON_BrepTrim& trim40 = brep->NewTrim(brep->m_E[8], true, loop0374, 3 /* trim */); /* 23 */
trim40.m_iso = ON_Surface::W_iso;
trim40.m_type = ON_BrepTrim::mated;
trim40.m_tolerance[0] = SMALL_FASTF;
trim40.m_tolerance[1] = SMALL_FASTF;
return brep;
}
bool ON_BrepExtrude(
ON_Brep& brep,
const ON_Curve& path_curve,
bool bCap
)
{
ON_Workspace ws;
const int vcount0 = brep.m_V.Count();
const int tcount0 = brep.m_T.Count();
const int lcount0 = brep.m_L.Count();
const int ecount0 = brep.m_E.Count();
const int fcount0 = brep.m_F.Count();
const ON_3dPoint PathStart = path_curve.PointAtStart();
ON_3dPoint P = path_curve.PointAtEnd();
if ( !PathStart.IsValid() || !P.IsValid() )
return false;
const ON_3dVector height = P - PathStart;
if ( !height.IsValid() || height.Length() <= ON_ZERO_TOLERANCE )
return false;
ON_Xform tr;
tr.Translation(height);
// count number of new sides
int side_count = 0;
int i, vi, ei, fi;
bool* bSideEdge = (bool*)ws.GetIntMemory(ecount0*sizeof(bSideEdge[0]));
for ( ei = 0; ei < ecount0; ei++ )
{
const ON_BrepEdge& e = brep.m_E[ei];
if ( 1 == e.m_ti.Count() )
{
side_count++;
bSideEdge[ei] = true;
}
else
{
bSideEdge[ei] = false;
}
}
brep.m_V.Reserve( 2*vcount0 );
i = 4*side_count + (bCap?tcount0:0);
brep.m_T.Reserve( tcount0 + i );
brep.m_C2.Reserve( brep.m_C2.Count() + i );
brep.m_L.Reserve( lcount0 + side_count + (bCap?lcount0:0) );
i = side_count + (bCap?ecount0:side_count);
brep.m_E.Reserve( ecount0 + i );
brep.m_C3.Reserve( brep.m_C3.Count() + i );
i = side_count + (bCap?fcount0:0);
brep.m_F.Reserve( fcount0 + i );
brep.m_S.Reserve( brep.m_S.Count() + i );
bool bOK = true;
// build top vertices
int* topvimap = ws.GetIntMemory(vcount0);
memset(topvimap,0,vcount0*sizeof(topvimap[0]));
if ( bCap )
{
for ( vi = 0; vi < vcount0; vi++ )
{
const ON_BrepVertex& bottomv = brep.m_V[vi];
ON_BrepVertex& topv = brep.NewVertex(bottomv.point+height,bottomv.m_tolerance);
topvimap[vi] = topv.m_vertex_index;
}
}
else
{
for ( ei = 0; ei < ecount0; ei++ )
{
if ( bSideEdge[ei] )
{
const ON_BrepEdge& bottome = brep.m_E[ei];
int bottomvi0 = bottome.m_vi[0];
if ( bottomvi0 < 0 || bottomvi0 >= vcount0 )
{
bOK = false;
break;
}
int bottomvi1 = bottome.m_vi[1];
if ( bottomvi1 < 0 || bottomvi1 >= vcount0 )
{
bOK = false;
break;
}
if ( !topvimap[bottomvi0] )
{
const ON_BrepVertex& bottomv = brep.m_V[bottomvi0];
ON_BrepVertex& topv = brep.NewVertex(bottomv.point+height,bottomv.m_tolerance);
topvimap[bottomvi0] = topv.m_vertex_index;
}
if ( !topvimap[bottomvi1] )
{
const ON_BrepVertex& bottomv = brep.m_V[bottomvi1];
ON_BrepVertex& topv = brep.NewVertex(bottomv.point+height,bottomv.m_tolerance);
topvimap[bottomvi1] = topv.m_vertex_index;
}
}
}
}
// build top edges
int* topeimap = ws.GetIntMemory(ecount0);
memset(topeimap,0,ecount0*sizeof(topeimap[0]));
if ( bOK ) for ( ei = 0; ei < ecount0; ei++ )
{
if ( bCap || bSideEdge[ei] )
{
const ON_BrepEdge& bottome = brep.m_E[ei];
ON_BrepVertex& topv0 = brep.m_V[topvimap[bottome.m_vi[0]]];
ON_BrepVertex& topv1 = brep.m_V[topvimap[bottome.m_vi[1]]];
ON_Curve* c3 = bottome.DuplicateCurve();
if ( !c3 )
{
bOK = false;
break;
}
c3->Transform(tr);
int c3i = brep.AddEdgeCurve(c3);
ON_BrepEdge& tope = brep.NewEdge(topv0,topv1,c3i,0,bottome.m_tolerance);
topeimap[ei] = tope.m_edge_index;
}
}
// build side edges
int* sideveimap = ws.GetIntMemory(vcount0);
memset(sideveimap,0,vcount0*sizeof(sideveimap[0]));
if ( bOK ) for ( vi = 0; vi < vcount0; vi++ )
{
ON_BrepVertex& bottomv = brep.m_V[vi];
for ( int vei = 0; vei < bottomv.m_ei.Count(); vei++ )
{
if ( bSideEdge[bottomv.m_ei[vei]] && topvimap[vi] )
{
ON_BrepVertex& topv = brep.m_V[topvimap[vi]];
ON_Curve* c3 = path_curve.DuplicateCurve();
if ( !c3 )
{
bOK = false;
}
else
{
ON_3dVector D = bottomv.point - PathStart;
c3->Translate(D);
int c3i = brep.AddEdgeCurve(c3);
const ON_BrepEdge& e = brep.NewEdge(bottomv,topv,c3i,0,0.0);
sideveimap[vi] = e.m_edge_index;
}
break;
}
}
}
if ( bOK && bCap )
{
// build top faces
for (fi = 0; fi < fcount0; fi++ )
{
const ON_BrepFace& bottomf = brep.m_F[fi];
ON_Surface* srf = bottomf.DuplicateSurface();
if ( !srf )
{
bOK = false;
break;
}
srf->Transform(tr);
int si = brep.AddSurface(srf);
ON_BrepFace& topf = brep.NewFace(si);
topf.m_bRev = !bottomf.m_bRev;
const int loop_count = bottomf.m_li.Count();
topf.m_li.Reserve(loop_count);
for ( int fli = 0; fli < loop_count; fli++ )
{
const ON_BrepLoop& bottoml = brep.m_L[bottomf.m_li[fli]];
ON_BrepLoop& topl = brep.NewLoop(bottoml.m_type,topf);
const int loop_trim_count = bottoml.m_ti.Count();
topl.m_ti.Reserve(loop_trim_count);
for ( int lti = 0; lti < loop_trim_count; lti++ )
{
const ON_BrepTrim& bottomt = brep.m_T[bottoml.m_ti[lti]];
ON_NurbsCurve* c2 = ON_NurbsCurve::New();
if ( !bottomt.GetNurbForm(*c2) )
{
delete c2;
bOK = false;
break;
}
int c2i = brep.AddTrimCurve(c2);
ON_BrepTrim* topt = 0;
if ( bottomt.m_ei >= 0 )
{
ON_BrepEdge& tope = brep.m_E[topeimap[bottomt.m_ei]];
topt = &brep.NewTrim(tope,bottomt.m_bRev3d,topl,c2i);
}
else
{
// singular trim
ON_BrepVertex& topv = brep.m_V[topvimap[bottomt.m_vi[0]]];
topt = &brep.NewSingularTrim(topv,topl,bottomt.m_iso,c2i);
}
topt->m_tolerance[0] = bottomt.m_tolerance[0];
topt->m_tolerance[1] = bottomt.m_tolerance[1];
topt->m_pbox = bottomt.m_pbox;
topt->m_type = bottomt.m_type;
topt->m_iso = bottomt.m_iso;
}
topl.m_pbox = bottoml.m_pbox;
}
}
}
// build sides
int bRev3d[4] = {0,0,1,1};
int vid[4], eid[4];
if( bOK ) for ( ei = 0; ei < ecount0; ei++ )
{
if ( bSideEdge[ei] && topeimap[ei] )
{
ON_BrepEdge& bottome = brep.m_E[ei];
ON_BrepEdge& tope = brep.m_E[topeimap[ei]];
vid[0] = bottome.m_vi[0];
vid[1] = bottome.m_vi[1];
vid[2] = topvimap[vid[1]];
vid[3] = topvimap[vid[0]];
if ( sideveimap[vid[0]] && sideveimap[vid[1]] )
{
ON_BrepEdge& leftedge = brep.m_E[sideveimap[vid[0]]];
ON_BrepEdge& rightedge = brep.m_E[sideveimap[vid[1]]];
ON_Curve* cx = bottome.DuplicateCurve();
if ( !cx )
{
bOK = false;
break;
}
ON_Curve* cy = leftedge.DuplicateCurve();
if ( !cy )
{
delete cx;
bOK = false;
break;
}
ON_SumSurface* srf = new ON_SumSurface();
srf->m_curve[0] = cx;
srf->m_curve[1] = cy;
srf->m_basepoint = srf->m_curve[1]->PointAtStart();
srf->m_basepoint.x = -srf->m_basepoint.x;
srf->m_basepoint.y = -srf->m_basepoint.y;
srf->m_basepoint.z = -srf->m_basepoint.z;
eid[0] = bottome.m_edge_index;
eid[1] = rightedge.m_edge_index;
eid[2] = tope.m_edge_index;
eid[3] = leftedge.m_edge_index;
ON_BrepFace* face = brep.NewFace(srf,vid,eid,bRev3d);
if ( !face )
{
bOK = false;
break;
}
else if ( bottome.m_ti.Count() == 2 )
{
const ON_BrepTrim& trim0 = brep.m_T[bottome.m_ti[0]];
const ON_BrepTrim& trim1 = brep.m_T[bottome.m_ti[1]];
const ON_BrepLoop& loop0 = brep.m_L[trim0.m_li];
const ON_BrepLoop& loop1 = brep.m_L[trim1.m_li];
bool bBottomFaceRev = brep.m_F[(loop0.m_fi != face->m_face_index) ? loop0.m_fi : loop1.m_fi].m_bRev;
bool bSideFaceRev = ( trim0.m_bRev3d != trim1.m_bRev3d )
? bBottomFaceRev
: !bBottomFaceRev;
face->m_bRev = bSideFaceRev;
}
}
}
}
if ( !bOK )
{
for ( vi = brep.m_V.Count(); vi >= vcount0; vi-- )
{
brep.DeleteVertex(brep.m_V[vi]);
}
}
return bOK;
}
bool ON_BrepConeLoop(
ON_Brep& brep,
int loop_index,
ON_3dPoint apex_point
)
{
if ( loop_index < 0 && loop_index >= brep.m_L.Count() )
return false;
int lti, ti, i, vid[4], eid[4], bRev3d[4];
// indices of new faces appended to the side_face_index[] array
// (1 face index for each trim, -1 is used for singular trims)
// count number of new objects so we can grow arrays
// efficiently and use refs to dynamic array elements.
const int loop_trim_count = brep.m_L[loop_index].m_ti.Count();
if ( loop_trim_count == 0 )
return false;
// save input trim and edge counts for use below
const int trim_count0 = brep.m_T.Count();
const int edge_count0 = brep.m_E.Count();
ON_BrepExtrudeHelper_ReserveSpace( brep, loop_trim_count, 0 );
int prev_face_index = -1;
int first_face_east_trim_index = -1;
ON_BrepVertex& apex_vertex = brep.NewVertex( apex_point, 0.0 );
for ( lti = 0; lti < loop_trim_count; lti++ )
{
ON_NurbsSurface* cone_srf = 0;
ti = brep.m_L[loop_index].m_ti[lti];
if ( ti < 0 || ti >= trim_count0 )
continue;
for ( i = 0; i < 4; i++ )
{
vid[i] = -1;
eid[i] = -1;
}
bRev3d[0] = false;
bRev3d[1] = false;
bRev3d[2] = false;
bRev3d[3] = false;
// get side surface for new face
// get side surface for new face
{
ON_BrepTrim& trim = brep.m_T[ti];
if ( trim.m_ei >= 0 && trim.m_ei < edge_count0 )
{
const ON_BrepEdge& base_edge = brep.m_E[trim.m_ei];
// connect new face to existing topology on trim
vid[0] = trim.m_vi[1];
vid[1] = trim.m_vi[0];
eid[0] = base_edge.m_edge_index;
bRev3d[0] = (trim.m_bRev3d?false:true);
cone_srf = ON_BrepExtrudeHelper_MakeConeSrf( apex_point, base_edge, bRev3d[0] );
}
}
if ( !cone_srf )
continue;
vid[2] = apex_vertex.m_vertex_index;
vid[3] = apex_vertex.m_vertex_index;
if ( prev_face_index >= 0 )
{
const ON_BrepTrim& prev_west_trim = brep.m_T[ brep.m_L[ brep.m_F[prev_face_index].m_li[0]].m_ti[3] ];
vid[2] = prev_west_trim.m_vi[0];
eid[1] = prev_west_trim.m_ei;
bRev3d[1] = (prev_west_trim.m_bRev3d?false:true);
}
if ( first_face_east_trim_index >= 0 && brep.m_T[first_face_east_trim_index].m_vi[0] == vid[0] )
{
const ON_BrepTrim& first_face_east_trim = brep.m_T[first_face_east_trim_index];
vid[3] = first_face_east_trim.m_vi[1];
eid[3] = first_face_east_trim.m_ei;
bRev3d[3] = (first_face_east_trim.m_bRev3d?false:true);
}
const ON_BrepFace* side_face = brep.NewFace(cone_srf,vid,eid,bRev3d);
if ( side_face )
{
prev_face_index = side_face->m_face_index;
if ( first_face_east_trim_index < 0 )
first_face_east_trim_index = brep.m_L[ side_face->m_li[0] ].m_ti[1];
}
}
return true;
}
static
ON_BOOL32 ON_BrepExtrudeHelper_MakeSides(
ON_Brep& brep,
int loop_index,
const ON_Curve& path_curve,
ON_BOOL32 bCap,
ON_SimpleArray<int>& side_face_index
)
{
int lti, ti, i, vid[4], eid[4], bRev3d[4];
// indices of new faces appended to the side_face_index[] array
// (1 face index for each trim, -1 is used for singular trims)
// count number of new objects so we can grow arrays
// efficiently and use refs to dynamic array elements.
const int loop_trim_count = brep.m_L[loop_index].m_ti.Count();
if ( loop_trim_count == 0 )
return false;
// save input trim and edge counts for use below
const int trim_count0 = brep.m_T.Count();
const int edge_count0 = brep.m_E.Count();
ON_BrepExtrudeHelper_ReserveSpace( brep, loop_trim_count, bCap?1:0 );
side_face_index.Reserve( side_face_index.Count() + loop_trim_count); // index of new face above brep.m_L[loop_index].m_ti[lti]
int prev_face_index = -1;
int first_face_east_trim_index = -1;
for ( lti = 0; lti < loop_trim_count; lti++ )
{
ON_SumSurface* sum_srf = 0;
side_face_index.Append(-1);
ti = brep.m_L[loop_index].m_ti[lti];
if ( ti < 0 || ti >= trim_count0 )
continue;
for ( i = 0; i < 4; i++ )
{
vid[i] = -1;
eid[i] = -1;
}
bRev3d[0] = false;
bRev3d[1] = false;
bRev3d[2] = false;
bRev3d[3] = false;
// get side surface for new face
{
ON_BrepTrim& trim = brep.m_T[ti];
if ( trim.m_ei >= 0 && trim.m_ei < edge_count0 )
{
const ON_BrepEdge& base_edge = brep.m_E[trim.m_ei];
// 5 September, 2003 Dale Lear
// do not extrude seams - fixes rectangle slabe bug
if ( trim.m_type == ON_BrepTrim::seam )
{
prev_face_index = -1;
continue;
}
// connect new face to existing topology on trim
vid[0] = trim.m_vi[1];
vid[1] = trim.m_vi[0];
eid[0] = base_edge.m_edge_index;
bRev3d[0] = (trim.m_bRev3d?false:true);
sum_srf = ON_BrepExtrudeHelper_MakeSumSrf( path_curve, base_edge, trim.m_bRev3d );
}
}
if ( !sum_srf )
continue;
if ( prev_face_index >= 0 )
{
const ON_BrepTrim& prev_west_trim = brep.m_T[ brep.m_L[ brep.m_F[prev_face_index].m_li[0]].m_ti[3] ];
vid[2] = prev_west_trim.m_vi[0];
eid[1] = prev_west_trim.m_ei;
bRev3d[1] = (prev_west_trim.m_bRev3d?false:true);
}
if ( first_face_east_trim_index >= 0 && brep.m_T[first_face_east_trim_index].m_vi[0] == vid[0] )
{
const ON_BrepTrim& first_face_east_trim = brep.m_T[first_face_east_trim_index];
vid[3] = first_face_east_trim.m_vi[1];
eid[3] = first_face_east_trim.m_ei;
bRev3d[3] = (first_face_east_trim.m_bRev3d?false:true);
}
const ON_BrepFace* side_face = brep.NewFace(sum_srf,vid,eid,bRev3d);
if ( side_face )
{
*side_face_index.Last() = side_face->m_face_index;
prev_face_index = side_face->m_face_index;
if ( first_face_east_trim_index < 0 )
first_face_east_trim_index = brep.m_L[ side_face->m_li[0] ].m_ti[1];
}
}
return true;
}