US_EquilTime::US_EquilTime() : US_Widgets( true )
{
astfem_rsa = new US_Astfem_RSA( model, simparams );
connect( astfem_rsa, SIGNAL( new_scan ( QVector< double >*, double* ) ),
SLOT( check_equil( QVector< double >*, double* ) ) );
connect( astfem_rsa, SIGNAL( new_time( double ) ),
SLOT( set_time( double ) ) );
setWindowTitle( tr( "Equilibrium Time Prediction" ) );
setPalette( US_GuiSettings::frameColor() );
init_simparams();
QBoxLayout* main = new QHBoxLayout( this );
main->setSpacing ( 2 );
main->setContentsMargins ( 2, 2, 2, 2 );
// Left Column
QGridLayout* left = new QGridLayout;
int row = 0;
QLabel* lb_sample = us_banner( tr( "Model Settings" ) );
left->addWidget( lb_sample, row++, 0, 1, 2 );
QGridLayout* buttons1 = new QGridLayout;
int b_row = 0;
pb_changeModel = us_pushbutton( tr( "Set / Change / Review Model") );
connect ( pb_changeModel, SIGNAL( clicked() ) , SLOT( change_model() ) );
buttons1->addWidget( pb_changeModel, b_row++, 0, 1, 2 );
left->addLayout( buttons1, row, 0, 3, 2 );
row += 3;
QPalette p;
p.setColor( QPalette::WindowText, Qt::white );
p.setColor( QPalette::Shadow , Qt::white );
QFont font( US_GuiSettings::fontFamily(),
US_GuiSettings::fontSize(),
QFont::Bold );
// Radius Info
QLabel* lb_radius = us_banner( tr( "Radius Settings" ) );
left->addWidget( lb_radius, row++, 0, 1, 2 );
QGroupBox* channelGroupBox = new QGroupBox( tr( "Channel Type" ) );
channelGroupBox->setContentsMargins ( 2, 2, 2, 2 );
channelGroupBox->setPalette( p );
channelGroupBox->setFont ( font );
QRadioButton* rb_inner;
QRadioButton* rb_outer;
QRadioButton* rb_center;
QRadioButton* rb_custom;
QGridLayout* rb5 = us_radiobutton( tr( "Inner Channel" ), rb_inner, true );
QGridLayout* rb6 = us_radiobutton( tr( "Outer Channel" ), rb_outer );
QGridLayout* rb7 = us_radiobutton( tr( "Center Channel" ), rb_center );
QGridLayout* rb8 = us_radiobutton( tr( "Custom" ), rb_custom );
// Group the buttons
QButtonGroup* channelGroup = new QButtonGroup;
channelGroup->addButton( rb_inner , INNER );
channelGroup->addButton( rb_outer , OUTER );
channelGroup->addButton( rb_center, CENTER );
channelGroup->addButton( rb_custom, CUSTOM );
connect( channelGroup, SIGNAL( buttonClicked( int ) ),
SLOT ( new_channel ( int ) ) );
current_position = INNER;
QGridLayout* channel = new QGridLayout;
channel->setContentsMargins ( 2, 2, 2, 2 );
channel->setSpacing( 0 );
channel->addLayout( rb5, 0, 0 );
channel->addLayout( rb6, 0, 1 );
channel->addLayout( rb7, 1, 0 );
channel->addLayout( rb8, 1, 1 );
channelGroupBox->setLayout( channel );
left->addWidget( channelGroupBox, row, 0, 2, 2 );
row += 2;
// Top Radius
QLabel* lb_top = us_label( tr( "Top Radius:" ) );
left->addWidget( lb_top, row, 0 );
cnt_top = us_counter( 3, 5.8, 7.3, 5.9 );
cnt_top->setSingleStep( 0.01 );
cnt_top->setEnabled ( false );
left->addWidget( cnt_top, row++, 1 );
// Bottom Radius
QLabel* lb_bottom = us_label( tr( "Bottom Radius:" ) );
left->addWidget( lb_bottom, row, 0 );
cnt_bottom = us_counter( 3, 5.8, 7.3, 6.2 );
cnt_bottom->setSingleStep ( 0.01 );
cnt_bottom->setEnabled ( false );
left->addWidget( cnt_bottom, row++, 1 );
// Rotorspeed Info
QLabel* lb_rotor = us_banner( tr( "Rotorspeed Settings" ) );
left->addWidget( lb_rotor, row++, 0, 1, 2 );
// Speed type buttons
QGroupBox* rotor = new QGroupBox( tr( "Speed Type" ) );
rotor->setContentsMargins ( 2, 10, 2, 2 );
rotor->setPalette( p );
rotor->setFont ( font );
QRadioButton* rb_sigma;
QRadioButton* rb_rpm;
QGridLayout* rb9 = us_radiobutton( "Use Sigma", rb_sigma, true );
QGridLayout* rb10 = us_radiobutton( "Use RPM" , rb_rpm );
speed_type = SIGMA;
sigma_start = 1;
sigma_stop = 4;
rpm_start = 18000;
rpm_stop = 36000;
speed_count = 5;
QButtonGroup* speedGroup = new QButtonGroup;
speedGroup->addButton( rb_sigma, SIGMA );
speedGroup->addButton( rb_rpm , RPM );
connect( speedGroup, SIGNAL( buttonClicked( int ) ),
SLOT ( update_speeds( int ) ) );
QGridLayout* speedType = new QGridLayout;
speedType->setContentsMargins( 2, 2, 2, 2 );
speedType->setSpacing ( 0 );
speedType->addLayout( rb9, 0, 0 );
speedType->addLayout( rb10, 0, 1 );
rotor->setLayout( speedType );
left->addWidget( rotor, row++, 0, 1, 2 );
// Low speed
lb_lowspeed = us_label( tr( "Low Speed (sigma):" ) );
left->addWidget( lb_lowspeed, row, 0 );
cnt_lowspeed = us_counter( 3, 0.01, 10.0, sigma_start );
cnt_lowspeed->setSingleStep( 0.01 );
left->addWidget( cnt_lowspeed, row++, 1 );
connect( cnt_lowspeed, SIGNAL( valueChanged( double ) ),
SLOT ( new_lowspeed( double ) ) );
// High speed
lb_highspeed = us_label( tr( "High Speed (sigma):" ) );
left->addWidget( lb_highspeed, row, 0 );
cnt_highspeed = us_counter( 3, 0.01, 10.0, sigma_stop );
cnt_highspeed->setSingleStep( 0.01 );
left->addWidget( cnt_highspeed, row++, 1 );
connect( cnt_highspeed, SIGNAL( valueChanged ( double ) ),
SLOT ( new_highspeed( double ) ) );
// Speed steps
QLabel* lb_speedsteps = us_label( tr( "Speed Steps:" ) );
left->addWidget( lb_speedsteps, row, 0 );
cnt_speedsteps = us_counter( 3, 1.0, 100.0, speed_count );
cnt_speedsteps->setSingleStep( 1.0 );
left->addWidget( cnt_speedsteps, row++, 1 );
connect( cnt_speedsteps, SIGNAL( valueChanged ( double ) ),
SLOT ( new_speedstep( double ) ) );
// Speed list
QLabel* lb_speedlist = us_label( tr( "Current Speed List:" ) );
left->addWidget( lb_speedlist, row, 0 );
te_speedlist = us_textedit();
te_speedlist->setReadOnly( true );
left->addWidget( te_speedlist, row, 1, 3, 1 );
left->setRowStretch ( row + 1, 99 );
row += 3;
// Misc Info
QLabel* lb_sim2 = us_banner( tr( "Simulation Settings" ) );
left->addWidget( lb_sim2, row++, 0, 1, 2 );
// Tolerance
QLabel* lb_tolerance = us_label( tr( "Tolerance:" ) );
left->addWidget( lb_tolerance, row, 0 );
cnt_tolerance = us_counter( 3, 1.0e-5, 0.01, 0.0005 );
cnt_tolerance->setSingleStep( 1.0e-5 );
left->addWidget( cnt_tolerance, row++, 1 );
// Time increment
QLabel* lb_time = us_label( tr( "Time Increment (min):" ) );
left->addWidget( lb_time, row, 0 );
cnt_timeIncrement = us_counter( 3, 1.0, 1000.0, 15.0 );
cnt_timeIncrement->setSingleStep( 1.0 );
left->addWidget( cnt_timeIncrement, row++, 1 );
QGridLayout* buttons2 = new QGridLayout;
b_row = 0;
pb_estimate = us_pushbutton( tr( "Estimate Times" ) );
pb_estimate->setEnabled( false );
connect( pb_estimate, SIGNAL( clicked() ), SLOT( simulate() ) );
buttons2->addWidget( pb_estimate, b_row++, 0, 1, 2 );
QPushButton* pb_help = us_pushbutton( tr( "Help" ) );
connect( pb_help, SIGNAL( clicked() ), SLOT( help() ) );
buttons2->addWidget( pb_help, b_row, 0 );
QPushButton* pb_close = us_pushbutton( tr( "Close" ) );
connect( pb_close, SIGNAL( clicked() ), SLOT( close() ) );
buttons2->addWidget( pb_close, b_row++, 1 );
left->addLayout( buttons2, row, 0, 2, 2 );
main->addLayout( left );
// Right Column
// Simulation plot
QBoxLayout* right = new QVBoxLayout;
QBoxLayout* plot = new US_Plot( equilibrium_plot,
tr( "Approach to Equilibrium Simulation" ),
tr( "Radius" ), tr( "Concentration" ) );
us_grid( equilibrium_plot );
equilibrium_plot->setMinimumSize( 600, 400 );
equilibrium_plot->setAxisScale( QwtPlot::yLeft , 0.0, 1.5 );
equilibrium_plot->setAxisScale( QwtPlot::xBottom, 5.9, 6.2 );
right->addLayout( plot );
te_info = new US_Editor( 0, true );
QFontMetrics fm( te_info->font() );
te_info->setFixedHeight( fm.height() * 15 );
right->addWidget( te_info );
right->setStretchFactor( plot , 10 );
right->setStretchFactor( te_info, 2 );
main->addLayout( right );
model.components.clear();
update_speeds( speed_type );
}
