void EffectDtmf::PopulateOrExchange(ShuttleGui & S)
{
// dialog will be passed values from effect
// Effect retrieves values from saved config
// Dialog will take care of using them to initialize controls
// If there is a selection, use that duration, otherwise use
// value from saved config: this is useful is user wants to
// replace selection with dtmf sequence
S.AddSpace(0, 5);
S.StartMultiColumn(2, wxCENTER);
{
wxTextValidator vldDtmf(wxFILTER_INCLUDE_CHAR_LIST, &dtmfSequence);
vldDtmf.SetIncludes(wxArrayString(WXSIZEOF(kSymbols), kSymbols));
mDtmfSequenceT = S.Id(ID_Sequence).AddTextBox(_("DTMF sequence:"), wxT(""), 10);
mDtmfSequenceT->SetValidator(vldDtmf);
FloatingPointValidator<double> vldAmp(3, &dtmfAmplitude, NUM_VAL_NO_TRAILING_ZEROES);
vldAmp.SetRange(MIN_Amplitude, MAX_Amplitude);
S.Id(ID_Amplitude).AddTextBox(_("Amplitude (0-1):"), wxT(""), 10)->SetValidator(vldAmp);
S.AddPrompt(_("Duration:"));
mDtmfDurationT = safenew
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
ID_Duration,
GetDurationFormat(),
GetDuration(),
mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
mDtmfDurationT->SetName(_("Duration"));
mDtmfDurationT->EnableMenu();
S.AddWindow(mDtmfDurationT);
S.AddFixedText(_("Tone/silence ratio:"), false);
S.SetStyle(wxSL_HORIZONTAL | wxEXPAND);
mDtmfDutyCycleS = S.Id(ID_DutyCycle).AddSlider( {},
dtmfDutyCycle * SCL_DutyCycle,
MAX_DutyCycle * SCL_DutyCycle,
MIN_DutyCycle * SCL_DutyCycle);
S.SetSizeHints(-1,-1);
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxCENTER);
{
S.AddFixedText(_("Duty cycle:"), false);
mDtmfDutyT = S.AddVariableText(wxString::Format(wxT("%.1f %%"), dtmfDutyCycle), false);
S.AddFixedText(_("Tone duration:"), false);
mDtmfSilenceT = S.AddVariableText(wxString::Format(wxString(wxT("%.0f ")) + _("ms"), dtmfTone * 1000.0), false);
S.AddFixedText(_("Silence duration:"), false);
mDtmfToneT = S.AddVariableText(wxString::Format(wxString(wxT("%0.f ")) + _("ms"), dtmfSilence * 1000.0), false);
}
S.EndMultiColumn();
}
void TruncSilenceDialog::PopulateOrExchange(ShuttleGui & S)
{
S.AddSpace(0, 5);
S.StartHorizontalLay();
{
// Action choices
wxArrayString processChoices;
processChoices.Add(_("Truncate Detected Silence"));
processChoices.Add(_("Compress Excess Silence"));
S.Id(ID_PROCESS_CHOICE).TieChoice(wxT(""),
mEffect->mProcessIndex,
&processChoices);
S.SetSizeHints(-1, -1);
}
S.EndHorizontalLay();
S.StartStatic(_("Detect Silence"));
{
S.StartMultiColumn(3, wxALIGN_CENTER_HORIZONTAL);
{
// Threshold
wxArrayString choices(Enums::NumDbChoices, Enums::GetDbChoices());
S.TieChoice(_("Level:"),
mEffect->mTruncDbChoiceIndex,
&choices);
S.SetSizeHints(-1, -1);
S.AddSpace(0); // 'choices' aleady includes units.
// Ignored silence
S.Id(ID_DETECT_SILENCE).TieNumericTextBox(_("Duration:"),
mEffect->mInitialAllowedSilence,
12);
S.AddUnits(wxT("seconds"));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartMultiColumn(3, wxALIGN_CENTER_HORIZONTAL);
{
// Truncation / Compression factor
S.Id( ID_TRUNCATION_DURATION ).TieNumericTextBox(_("Truncate to:"),
mEffect->mTruncLongestAllowedSilence,
12);
S.AddUnits(wxT("seconds"));
S.Id( ID_COMPRESS_FACTOR ).TieNumericTextBox(_("Compress to:"),
mEffect->mSilenceCompressPercent,
12);
S.AddUnits(wxT("percent"));
}
S.EndMultiColumn();
// Warnings
pWarning = S.AddVariableText( wxT("") );
UpdateUI();
}
void TruncSilenceDialog::PopulateOrExchange(ShuttleGui & S)
{
S.StartHorizontalLay(wxCENTER, false);
{
S.AddTitle(_("by Lynn Allan"));
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxCENTER, false);
{
// Add a little space
}
S.EndHorizontalLay();
S.StartThreeColumn();
{
wxArrayString choices(Enums::NumDbChoices, Enums::GetDbChoices());
S.Id( ID_LONGEST_SILENCE_TEXT ).TieTextBox(_("Max silence duration:"),
mEffect->mTruncLongestAllowedSilentMs,
10);
S.AddUnits( _("milliseconds") );
//S.AddUnits(_("(9999999 or greater is off)"));
S.TieChoice(_("Threshold for silence:"),
mEffect->mTruncDbChoiceIndex,
&choices);
}
S.EndTwoColumn();
pWarning = S.AddVariableText( wxT("") );
}
void RepeatDialog::PopulateOrExchange(ShuttleGui & S)
{
wxTextValidator vld(wxFILTER_INCLUDE_CHAR_LIST);
vld.SetIncludes(wxArrayString(12, numbers));
S.StartHorizontalLay(wxCENTER, false);
{
S.AddTitle(_("by Dominic Mazzoni && Vaughan Johnson"));
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxCENTER, false);
{
// Add a little space
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxCENTER, false);
{
mRepeatCount = S.Id(ID_REPEAT_TEXT).AddTextBox(_("Number of times to repeat:"),
wxT(""),
12);
mRepeatCount->SetValidator(vld);
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxCENTER, true);
{
mTotalTime = S.AddVariableText(_("New selection length: hh:mm:ss"));
}
S.EndHorizontalLay();
}
void DirectoriesPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Temporary files directory"));
{
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
S.Id(TempDirID);
mTempDir = S.TieTextBox(_("&Location:"),
wxT("/Directories/TempDir"),
wxT(""),
30);
S.Id(ChooseButtonID);
S.AddButton(_("C&hoose..."));
S.AddFixedText(_("Free Space:"));
mFreeSpace = S.AddVariableText(wxT(""));
}
S.EndMultiColumn();
}
S.EndStatic();
#ifdef DEPRECATED_AUDIO_CACHE
// See http://bugzilla.audacityteam.org/show_bug.cgi?id=545.
S.StartStatic(_("Audio cache"));
{
S.TieCheckBox(_("Play and/or record using &RAM (useful for slow drives)"),
wxT("/Directories/CacheBlockFiles"),
false);
S.StartTwoColumn();
{
S.TieNumericTextBox(_("Mi&nimum Free Memory (MB):"),
wxT("/Directories/CacheLowMem"),
16,
9);
}
S.EndTwoColumn();
S.AddVariableText(_("If the available system memory falls below this value, audio will no longer\nbe cached in memory and will be written to disk."))->Wrap(600);
}
S.EndStatic();
#endif // DEPRECATED_AUDIO_CACHE
}
void EffectRepeat::PopulateOrExchange(ShuttleGui & S)
{
S.StartHorizontalLay(wxCENTER, false);
{
IntegerValidator<int> vldRepeatCount(&repeatCount);
vldRepeatCount.SetRange(MIN_Count, 2147483647 / mProjectRate);
mRepeatCount = S.AddTextBox(_("Number of repeats to add:"), wxT(""), 12);
mRepeatCount->SetValidator(vldRepeatCount);
}
S.EndHorizontalLay();
S.StartMultiColumn(1, wxCENTER);
{
mCurrentTime = S.AddVariableText(_("Current selection length: dd:hh:mm:ss"));
mTotalTime = S.AddVariableText(_("New selection length: dd:hh:mm:ss"));
}
S.EndMultiColumn();
}
void DirectoriesPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Temporary files directory"));
{
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
S.Id(TempDirID);
mTempDir = S.TieTextBox(_("Location:"),
wxT("/Directories/TempDir"),
wxT(""),
30);
S.Id(ChooseButtonID);
S.AddButton(_("Choose..."));
S.AddFixedText(_("Free Space:"));
mFreeSpace = S.AddVariableText(wxT(""));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Audio cache"));
{
S.TieCheckBox(_("Play and/or record using RAM (useful for slow drives)"),
wxT("/Directories/CacheBlockFiles"),
false);
S.StartTwoColumn();
{
S.TieTextBox(_("Minimum Free Memory (MB):"),
wxT("/Directories/CacheLowMem"),
16,
9);
}
S.EndTwoColumn();
S.AddVariableText(_("If the available system memory falls below this value, audio will no longer\nbe cached in memory and will be written to disk."))->Wrap(600);
}
S.EndStatic();
}
void NormalizeDialog::PopulateOrExchange(ShuttleGui & S)
{
wxTextValidator vld(wxFILTER_NUMERIC);
S.StartHorizontalLay(wxCENTER, false);
{
S.AddTitle(_("by Dominic Mazzoni"));
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxCENTER, false);
{
// Add a little space
}
S.EndHorizontalLay();
S.StartTwoColumn();
{
S.StartVerticalLay(false);
{
mDCCheckBox = S.Id(ID_DC_REMOVE).AddCheckBox(_("Remove any DC offset (center on 0.0 vertically)"),
mDC ? wxT("true") : wxT("false"));
mGainCheckBox = S.Id(ID_NORMALIZE_AMPLITUDE).AddCheckBox(_("Normalize maximum amplitude to:"),
mGain ? wxT("true") : wxT("false"));
S.StartHorizontalLay(wxALIGN_CENTER, false);
{
mLevelTextCtrl = S.Id(ID_LEVEL_TEXT).AddTextBox(wxT(""), wxT(""), 10);
mLevelTextCtrl->SetValidator(vld);
mLevelTextCtrl->SetName(_("Maximum amplitude dB"));
mLeveldB = S.AddVariableText(_("dB"), false,
wxALIGN_CENTER_VERTICAL | wxALIGN_LEFT);
mWarning = S.AddVariableText( wxT(""), false,
wxALIGN_CENTER_VERTICAL | wxALIGN_LEFT);
}
S.EndHorizontalLay();
mStereoIndCheckBox = S.AddCheckBox(_("Normalize stereo channels independently"),
mStereoInd ? wxT("true") : wxT("false"));
}
S.EndVerticalLay();
}
S.EndTwoColumn();
}
void PopulateOrExchange(ShuttleGui & S)
{
wxString text;
S.SetBorder(10);
S.StartVerticalLay(true);
{
text.Printf(_("Audacity needs the file '%s' to import and export audio via FFmpeg."), mName.c_str());
S.AddTitle(text);
S.SetBorder(3);
S.StartHorizontalLay(wxALIGN_LEFT, true);
{
text.Printf(_("Location of '%s':"), mName.c_str());
S.AddTitle(text);
}
S.EndHorizontalLay();
S.StartMultiColumn(2, wxEXPAND);
S.SetStretchyCol(0);
{
if (mLibPath.GetFullPath().IsEmpty()) {
text.Printf(_("To find '%s', click here -->"), mName.c_str());
mPathText = S.AddTextBox(wxT(""), text, 0);
}
else {
mPathText = S.AddTextBox(wxT(""), mLibPath.GetFullPath(), 0);
}
S.Id(ID_FFMPEG_BROWSE).AddButton(_("Browse..."), wxALIGN_RIGHT);
S.AddVariableText(_("To get a free copy of FFmpeg, click here -->"), true);
S.Id(ID_FFMPEG_DLOAD).AddButton(_("Download"), wxALIGN_RIGHT);
}
S.EndMultiColumn();
S.AddStandardButtons();
}
S.EndVerticalLay();
Layout();
Fit();
SetMinSize(GetSize());
Center();
return;
}
void BassTrebleDialog::PopulateOrExchange(ShuttleGui & S)
{
S.StartStatic(wxT(""));
{
S.StartMultiColumn(3, wxEXPAND);
S.SetStretchyCol(2);
{
#ifdef __WXGTK__
// BoxSizer is to make first mnemonic work, on Linux.
wxPanel* cPanel = new wxPanel( this, wxID_ANY );
wxBoxSizer* cSizer = new wxBoxSizer(wxVERTICAL);
cPanel->SetSizer(cSizer);
#endif
wxTextValidator vld(wxFILTER_NUMERIC);
// Bass control
mBassT = S.Id(ID_BASS_TEXT).AddTextBox(_("&Bass (dB):"), wxT(""), 10);
mBassT->SetName(_("Bass (dB):"));
mBassT->SetValidator(vld);
S.SetStyle(wxSL_HORIZONTAL);
mBassS = S.Id(ID_BASS_SLIDER).AddSlider(wxT(""), 0, BASS_MAX, BASS_MIN);
mBassS->SetName(_("Bass"));
mBassS->SetRange(BASS_MIN, BASS_MAX);
mBassS->SetPageSize(30);
// Treble control
mTrebleT = S.Id(ID_TREBLE_TEXT).AddTextBox(_("&Treble (dB):"), wxT(""), 10);
mTrebleT->SetValidator(vld);
S.SetStyle(wxSL_HORIZONTAL);
mTrebleS = S.Id(ID_TREBLE_SLIDER).AddSlider(wxT(""), 0, TREBLE_MAX, TREBLE_MIN);
mTrebleS->SetName(_("Treble"));
mTrebleS->SetRange(TREBLE_MIN, TREBLE_MAX);
mTrebleS->SetPageSize(30);
// Level control
mLevelT = S.Id(ID_LEVEL_TEXT).AddTextBox(_("&Level (dB):"), wxT(""), 10);
mLevelT->SetValidator(vld);
S.SetStyle(wxSL_HORIZONTAL);
mLevelS = S.Id(ID_LEVEL_SLIDER).AddSlider(wxT(""), 0, LEVEL_MAX, LEVEL_MIN);
mLevelS->SetName(_("Level"));
mLevelS->SetRange(LEVEL_MIN, LEVEL_MAX);
mLevelS->SetPageSize(30);
}
S.EndMultiColumn();
}
S.EndStatic();
// Normalize checkbox
S.StartHorizontalLay(wxLEFT, true);
{
mNormalizeCheckBox = S.Id(ID_NORMALIZE).AddCheckBox(_("&Enable level control"),
mbNormalize ? wxT("true") : wxT("false"));
mWarning = S.AddVariableText( wxT(""), false,
wxALIGN_CENTER_VERTICAL | wxALIGN_LEFT);
}
S.EndHorizontalLay();
}
void ExportFFmpegOptions::PopulateOrExchange(ShuttleGui & S)
{
S.StartVerticalLay(1);
S.StartMultiColumn(7, wxEXPAND);
{
S.SetStretchyCol(1);
mPresetCombo = S.Id(FEPresetID).AddCombo(_("Preset:"), gPrefs->Read(wxT("/FileFormats/FFmpegPreset"),wxEmptyString), mPresetNames);
mLoadPreset = S.Id(FELoadPresetID).AddButton(_("Load Preset"));
mSavePreset = S.Id(FESavePresetID).AddButton(_("Save Preset"));
mDeletePreset = S.Id(FEDeletePresetID).AddButton(_("Delete Preset"));
mImportPresets = S.Id(FEImportPresetsID).AddButton(_("Import Presets"));
mExportPresets = S.Id(FEExportPresetsID).AddButton(_("Export Presets"));
}
S.EndMultiColumn();
S.StartTwoColumn();
{
S.Id(FEFormatLabelID).AddVariableText(_("Format:"));
mFormatName = S.Id(FEFormatNameID).AddVariableText(wxT(""));
S.Id(FECodecLabelID).AddVariableText(_("Codec:"));
mCodecName = S.Id(FECodecNameID).AddVariableText(wxT(""));
}
S.EndTwoColumn();
S.AddVariableText(_("Not all formats and codecs are compatible. Some parameters (such as bitrate and samplerate) combinations are not compatible with some codecs too."),false);
S.StartMultiColumn(3,wxEXPAND);
{
S.AddVariableText(_("Format selector:"),true);
S.AddVariableText(_("Codec selector:"),true);
S.AddVariableText(wxEmptyString);
S.Id(FEAllFormatsID).AddButton(_("Show All Formats"));
S.Id(FEAllCodecsID).AddButton(_("Show All Codecs"));
S.AddVariableText(wxEmptyString);
mFormatList = S.Id(FEFormatID).AddListBox(&mFormatNames);
mCodecList = S.Id(FECodecID).AddListBox(&mCodecNames);
mFormatList->DeselectAll();
mCodecList->DeselectAll();
S.StartStatic(wxT("Options"),0);
{
S.StartMultiColumn(4,wxALIGN_LEFT);
{
mLanguageText = S.Id(FELanguageID).TieTextBox(_("Language:"), wxT("/FileFormats/FFmpegLanguage"), wxEmptyString, 0);
mLanguageText->SetToolTip(_("ISO 639 3-letter language code\nOptional\nempty - automatic"));
mTag = S.Id(FETagID).TieTextBox(_("Tag:"), wxT("/FileFormats/FFmpegTag"), wxEmptyString, 0);
mTag->SetToolTip(_("Codec tag (FOURCC)\nOptional\nempty - automatic"));
mBitrateSpin = S.Id(FEBitrateID).TieSpinCtrl(_("Bit Rate:"), wxT("/FileFormats/FFmpegBitRate"), 0,1000000,0);
mBitrateSpin->SetToolTip(_("Bit Rate (bits/second) - influences the resulting file size and quality\nSome codecs may only accept specific values (128k, 192k, 256k etc)\n0 - automatic\nRecommended - 192000"));
mQualitySpin = S.Id(FEQualityID).TieSpinCtrl(_("Quality:"), wxT("/FileFormats/FFmpegQuality"), 0,500,-1);
mQualitySpin->SetToolTip(_("Overral quality, used differently by different codecs\nRequired for vorbis\n0 - automatic\n-1 - off (use bitrate instead)"));
mSampleRateSpin = S.Id(FESampleRateID).TieSpinCtrl(_("Sample Rate:"), wxT("/FileFormats/FFmpegSampleRate"), 0,200000,0);
mSampleRateSpin->SetToolTip(_("Sample rate (Hz)\n0 - don't change sample rate"));
mCutoffSpin = S.Id(FECutoffID).TieSpinCtrl(_("Cutoff Bandwidth:"), wxT("/FileFormats/FFmpegCutOff"), 0,10000000,0);
mCutoffSpin->SetToolTip(_("Audio cutoff bandwidth (Hz)\nOptional\n0 - automatic\n"));
S.AddVariableText(wxT("Use Bit Reservoir"));
S.Id(FEBitReservoirID).TieCheckBox(wxEmptyString, wxT("/FileFormats/FFmpegBitReservoir"), true);
mProfileChoice = S.Id(FEProfileID).TieChoice(_("Profile:"), wxT("/FileFormats/FFmpegAACProfile"),
mProfileLabels[0], mProfileNames, mProfileLabels);
mProfileChoice->SetToolTip(_("AAC Profile\nLow Complexity -default\nMost players won't play anything other than LC"));
}
S.EndMultiColumn();
S.StartStatic(wxT("FLAC options"),0);
{
S.StartMultiColumn(4);
{
mCompressionLevelSpin = S.Id(FECompLevelID).TieSpinCtrl(_("Compression Level:"), wxT("/FileFormats/FFmpegCompLevel"), 0,10,-1);
mCompressionLevelSpin->SetToolTip(_("Compression level\nRequired for FLAC\n-1 - automatic\nmin - 0 (fast encoding, large output file)\nmax - 10 (slow encoding, small output file)"));
mFrameSizeSpin = S.Id(FEFrameSizeID).TieSpinCtrl(_("Frame Size:"), wxT("/FileFormats/FFmpegFrameSize"), 0,65535,0);
mFrameSizeSpin->SetToolTip(_("Frame size\nOptional\n0 - default\nmin - 16\nmax - 65535"));
mLPCCoeffsPrecisionSpin = S.Id(FELPCCoeffsID).TieSpinCtrl(_("LPC coefficients precision"), wxT("/FileFormats/FFmpegLPCCoefPrec"), 0,15,0);
mLPCCoeffsPrecisionSpin->SetToolTip(_("LPC coefficients precision\nOptional\n0 - default\nmin - 1\nmax - 15"));
mMinPredictionOrderSpin = S.Id(FEMinPredID).TieSpinCtrl(_("Minimal prediction order"), wxT("/FileFormats/FFmpegMinPredOrder"), -1,32,-1);
mMinPredictionOrderSpin->SetToolTip(_("Minimal prediction order\nOptional\n-1 - default\nmin - 0\nmax - 32 (with LPC) or 4 (without LPC)"));
mMaxPredictionOrderSpin = S.Id(FEMaxPredID).TieSpinCtrl(_("Maximal prediction order"), wxT("/FileFormats/FFmpegMaxPredOrder"), -1,32,-1);
mMaxPredictionOrderSpin->SetToolTip(_("Maximal prediction order\nOptional\n-1 - default\nmin - 0\nmax - 32 (with LPC) or 4 (without LPC)"));
mPredictionOrderMethodChoice = S.Id(FEPredOrderID).TieChoice(_("Prediction Order Method:"), wxT("/FileFormats/FFmpegPredOrderMethod"),
mPredictionOrderMethodLabels[4], mPredictionOrderMethodNames, mPredictionOrderMethodLabels);
mProfileChoice->SetToolTip(_("Prediction Order Method\nEstimate - fastest, lower compression\nLog search - slowest, best compression\nFull search - default"));
mMinPartitionOrderSpin = S.Id(FEMinPartOrderID).TieSpinCtrl(_("Minimal partition order"), wxT("/FileFormats/FFmpegMinPartOrder"), -1,8,-1);
mMinPartitionOrderSpin->SetToolTip(_("Minimal partition order\nOptional\n-1 - default\nmin - 0\nmax - 8"));
mMaxPartitionOrderSpin = S.Id(FEMaxPartOrderID).TieSpinCtrl(_("Maximal partition order"), wxT("/FileFormats/FFmpegMaxPredOrder"), -1,8,-1);
mMaxPartitionOrderSpin->SetToolTip(_("Maximal partition order\nOptional\n-1 - default\nmin - 0\nmax - 8"));
S.AddVariableText(wxT("Use LPC"));
S.Id(FEUseLPCID).TieCheckBox(wxEmptyString, wxT("/FileFormats/FFmpegUseLPC"), true);
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(wxT("MPEG container options"),0);
{
S.StartMultiColumn(4);
{
mMuxRate = S.Id(FEMuxRateID).TieSpinCtrl(_("Mux Rate:"), wxT("/FileFormats/FFmpegMuxRate"), 0,10000000,0);
mMuxRate->SetToolTip(_("Maximum bit rate of the multiplexed stream\nOptional\n0 - default"));
mPacketSize = S.Id(FEPacketSizeID).TieSpinCtrl(_("Packet Size:"), wxT("/FileFormats/FFmpegPacketSize"), 0,10000000,0);
mPacketSize->SetToolTip(_("Packet size\nOptional\n0 - default"));
}
S.EndMultiColumn();
}
S.EndStatic();
}
S.EndStatic();
}
S.EndTwoColumn();
S.EndVerticalLay();
S.AddStandardButtons();
Layout();
Fit();
SetMinSize(GetSize());
Center();
return;
}
/// This PopulateOrExchange function is a good example of mixing the fully
/// automatic style of reading/writing from GUI to prefs with the partial form.
///
/// You'll notice that some of the Tie functions have Prefs identifiers in them
/// and others don't.
void LibraryPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("MP3 Export Library"));
{
S.StartTwoColumn();
{
S.AddVariableText(_("MP3 Library Version:"),
true,
wxALL | wxALIGN_RIGHT | wxALIGN_CENTRE_VERTICAL);
mMP3Version = S.AddVariableText(wxT("9.99"),
true,
wxALL | wxALIGN_LEFT | wxALIGN_CENTRE_VERTICAL);
S.AddVariableText(_("MP3 Library:"),
true,
wxALL | wxALIGN_RIGHT | wxALIGN_CENTRE_VERTICAL);
wxButton *locate_button = S.Id(ID_MP3_FIND_BUTTON).AddButton(_("&Locate..."),
wxALL | wxALIGN_LEFT | wxALIGN_CENTRE_VERTICAL);
S.AddVariableText(_("LAME MP3 Library:"),
true,
wxALL | wxALIGN_RIGHT | wxALIGN_CENTRE_VERTICAL);
wxButton *download_button = S.Id(ID_MP3_DOWN_BUTTON).AddButton(_("&Download"),
wxALL | wxALIGN_LEFT | wxALIGN_CENTRE_VERTICAL);
#ifdef DISABLE_DYNAMIC_LOADING_LAME
locate_button->Enable(FALSE);
download_button->Enable(FALSE);
#else
(void)locate_button;
(void)download_button;
#endif // DISABLE_DYNAMIC_LOADING_LAME
}
S.EndTwoColumn();
}
S.EndStatic();
S.StartStatic(_("FFmpeg Import/Export Library"));
{
S.StartTwoColumn();
{
S.AddVariableText(_("FFmpeg Library Version:"),
true,
wxALL | wxALIGN_RIGHT | wxALIGN_CENTRE_VERTICAL);
#if defined(USE_FFMPEG)
mFFmpegVersion = S.AddVariableText(_("No compatible FFmpeg library was found"),
true,
wxALL | wxALIGN_LEFT | wxALIGN_CENTRE_VERTICAL);
#else
mFFmpegVersion = S.AddVariableText(wxT("FFmpeg support is not compiled in"),
true,
wxALL | wxALIGN_LEFT | wxALIGN_CENTRE_VERTICAL);
#endif
S.AddVariableText(_("FFmpeg Library:"),
true,
wxALL | wxALIGN_RIGHT | wxALIGN_CENTRE_VERTICAL);
S.Id(ID_FFMPEG_FIND_BUTTON);
wxButton *bfnd = S.AddButton(_("Loca&te..."),
wxALL | wxALIGN_LEFT | wxALIGN_CENTRE_VERTICAL);
S.AddVariableText(_("FFmpeg Library:"),
true,
wxALL | wxALIGN_RIGHT | wxALIGN_CENTRE_VERTICAL);
S.Id(ID_FFMPEG_DOWN_BUTTON);
wxButton *bdwn = S.AddButton(_("Dow&nload"),
wxALL | wxALIGN_LEFT | wxALIGN_CENTRE_VERTICAL);
#if !defined(USE_FFMPEG) || defined(DISABLE_DYNAMIC_LOADING_FFMPEG)
bdwn->Enable(FALSE);
bfnd->Enable(FALSE);
#else
// fix compilation warnings about unused variables
bfnd, bdwn;
#endif
}
S.EndTwoColumn();
#ifdef EXPERIMENTAL_OD_FFMPEG
wxCheckBox* checkbox = S.TieCheckBox(_("Allow &background on-demand loading"),
wxT("/Library/FFmpegOnDemand"),
false);
#if !defined(USE_FFMPEG)
checkbox->Enable(FALSE);
#endif
#endif
}
S.EndStatic();
}
void NoiseRemovalDialog::PopulateOrExchange(ShuttleGui & S)
{
wxString step1Label;
wxString step1Prompt;
wxString step2Label;
wxString step2Prompt;
bool bCleanSpeechMode = false;
AudacityProject * project = GetActiveProject();
if( project && project->GetCleanSpeechMode() ) {
bCleanSpeechMode = true;
}
if (bCleanSpeechMode) {
// We're not marking these as translatable because most people
// don't use CleanSpeech so it'd be a waste of time for most
// translators
step1Label = wxT("Preparation Step");
step1Prompt = wxT("Listen carefully to section with some speech "
wxT("and some silence to check before/after.\n")
wxT("Select a few seconds of just noise ('thinner' ")
wxT("part of wave pattern usually between\nspoken ")
wxT("phrases or during pauses) so Audacity knows ")
wxT("what to filter out, then click"));
step2Label = wxT("Actually Remove Noise");
step2Prompt = wxT("Select what part of the audio you want filtered "
wxT("(Ctrl-A = All), chose how much noise\nyou want ")
wxT("filtered out with sliders below, and then click ")
wxT("'OK' to remove noise.\nFind best setting with ")
wxT("Ctrl-Z to Undo, Select All, and change ")
wxT("the slider positions."));
}
else {
step1Label = _("Step 1");
step1Prompt = _("Select a few seconds of just noise so Audacity knows what to filter out,\nthen click Get Noise Profile:");
step2Label = _("Step 2");
step2Prompt = _("Select all of the audio you want filtered, choose how much noise you want\nfiltered out, and then click 'OK' to remove noise.\n");
}
S.StartHorizontalLay(wxCENTER, false);
{
S.AddTitle(_("Noise Removal by Dominic Mazzoni"));
}
S.EndHorizontalLay();
S.StartStatic(step1Label);
{
S.AddVariableText(step1Prompt);
m_pButton_GetProfile = S.Id(ID_BUTTON_GETPROFILE).
AddButton(_("Get Noise Profile"));
}
S.EndStatic();
S.StartStatic(step2Label);
{
S.AddVariableText(step2Prompt);
S.StartMultiColumn(3, wxEXPAND);
S.SetStretchyCol(2);
{
mGainT = S.Id(ID_GAIN_TEXT).AddTextBox(_("Noise reduction (dB):"),
wxT(""),
0);
S.SetStyle(wxSL_HORIZONTAL);
mGainS = S.Id(ID_GAIN_SLIDER).AddSlider(wxT(""), 0, GAIN_MAX);
mGainS->SetName(_("Noise reduction"));
mGainS->SetRange(GAIN_MIN, GAIN_MAX);
mGainS->SetSizeHints(150, -1);
mFreqT = S.Id(ID_FREQ_TEXT).AddTextBox(_("Frequency smoothing (Hz):"),
wxT(""),
0);
S.SetStyle(wxSL_HORIZONTAL);
mFreqS = S.Id(ID_FREQ_SLIDER).AddSlider(wxT(""), 0, FREQ_MAX);
mFreqS->SetName(_("Frequency smoothing"));
mFreqS->SetRange(FREQ_MIN, FREQ_MAX);
mFreqS->SetSizeHints(150, -1);
mTimeT = S.Id(ID_FREQ_TEXT).AddTextBox(_("Attack/decay time (secs):"),
wxT(""),
0);
S.SetStyle(wxSL_HORIZONTAL);
mTimeS = S.Id(ID_TIME_SLIDER).AddSlider(wxT(""), 0, TIME_MAX);
mTimeS->SetName(_("Attach/decay time"));
mTimeS->SetRange(TIME_MIN, TIME_MAX);
mTimeS->SetSizeHints(150, -1);
}
S.EndMultiColumn();
}
S.EndStatic();
}
void EffectCompressor::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(5);
S.StartHorizontalLay(wxEXPAND, true);
{
S.SetBorder(10);
mPanel = safenew EffectCompressorPanel(S.GetParent(),
mThresholdDB,
mNoiseFloorDB,
mRatio);
mPanel->SetMinSize(wxSize(400, 200));
S.Prop(true).AddWindow(mPanel, wxEXPAND | wxALL);
S.SetBorder(5);
}
S.EndHorizontalLay();
S.StartStatic(wxT(""));
{
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
mThresholdLabel = S.AddVariableText(_("Threshold:"), true,
wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
S.SetStyle(wxSL_HORIZONTAL);
mThresholdSlider = S.Id(ID_Threshold).AddSlider(wxT(""),
DEF_Threshold * SCL_Threshold,
MAX_Threshold * SCL_Threshold,
MIN_Threshold * SCL_Threshold);
mThresholdSlider->SetName(_("Threshold"));
mThresholdText = S.AddVariableText(wxT("XXX dB"), true,
wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
mNoiseFloorLabel = S.AddVariableText(_("Noise Floor:"), true,
wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
S.SetStyle(wxSL_HORIZONTAL);
mNoiseFloorSlider = S.Id(ID_NoiseFloor).AddSlider(wxT(""),
DEF_NoiseFloor / SCL_NoiseFloor,
MAX_NoiseFloor / SCL_NoiseFloor,
MIN_NoiseFloor / SCL_NoiseFloor);
mNoiseFloorSlider->SetName(_("Noise Floor"));
mNoiseFloorText = S.AddVariableText(wxT("XXX dB"), true,
wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
mRatioLabel = S.AddVariableText(_("Ratio:"), true,
wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
S.SetStyle(wxSL_HORIZONTAL);
mRatioSlider = S.Id(ID_Ratio).AddSlider(wxT(""),
DEF_Ratio * SCL_Ratio,
MAX_Ratio * SCL_Ratio,
MIN_Ratio * SCL_Ratio);
mRatioSlider->SetName(_("Ratio"));
mRatioSlider->SetPageSize(5);
mRatioText = S.AddVariableText(wxT("XXXX:1"), true,
wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
/* i18n-hint: Particularly in percussion, sounds can be regarded as having
* an 'attack' phase where the sound builds up and a 'decay' where the
* sound dies away. So this means 'onset duration'. */
mAttackLabel = S.AddVariableText(_("Attack Time:"), true,
wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
S.SetStyle(wxSL_HORIZONTAL);
mAttackSlider = S.Id(ID_Attack).AddSlider(wxT(""),
DEF_AttackTime * SCL_AttackTime,
MAX_AttackTime * SCL_AttackTime,
MIN_AttackTime * SCL_AttackTime);
mAttackSlider->SetName(_("Attack Time"));
mAttackText = S.AddVariableText(wxT("XXXX secs"), true,
wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
mDecayLabel = S.AddVariableText(_("Release Time:"), true,
wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
S.SetStyle(wxSL_HORIZONTAL);
mDecaySlider = S.Id(ID_Decay).AddSlider(wxT(""),
DEF_ReleaseTime * SCL_ReleaseTime,
MAX_ReleaseTime * SCL_ReleaseTime,
MIN_ReleaseTime * SCL_ReleaseTime);
mDecaySlider->SetName(_("Release Time"));
mDecayText = S.AddVariableText(wxT("XXXX secs"), true,
wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartHorizontalLay(wxCENTER, false);
{
/* i18n-hint: Make-up, i.e. correct for any reduction, rather than fabricate it.*/
mGainCheckBox = S.AddCheckBox(_("Make-up gain for 0 dB after compressing"),
DEF_Normalize ? wxT("true") : wxT("false"));
mPeakCheckBox = S.AddCheckBox(_("Compress based on Peaks"),
DEF_UsePeak ? wxT("true") : wxT("false"));
}
S.EndHorizontalLay();
}
/// Normally in classes derived from PrefsPanel this function
/// is used both to populate the panel and to exchange data with it.
/// With KeyConfigPrefs all the exchanges are handled specially,
/// so this is only used in populating the panel.
void KeyConfigPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Key Bindings"), 1);
{
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
S.StartHorizontalLay(wxALIGN_LEFT|wxALIGN_CENTER_VERTICAL, 0);
{
S.AddTitle(_("View by:"));
S.StartRadioButtonGroup(wxT("/Prefs/KeyConfig/ViewBy"), wxT("tree"));
{
mViewByTree = S.Id(ViewByTreeID).TieRadioButton(_("&Tree"), wxT("tree"));
mViewByTree->SetName(_("View by tree"));
mViewByName = S.Id(ViewByNameID).TieRadioButton(_("&Name"), wxT("name"));
mViewByName->SetName(_("View by name"));
mViewByKey = S.Id(ViewByKeyID).TieRadioButton(_("&Key"), wxT("key"));
mViewByKey->SetName(_("View by key"));
}
S.EndRadioButtonGroup();
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxALIGN_CENTER|wxALIGN_CENTER_VERTICAL, 0);
{
// just a spacer
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxALIGN_RIGHT|wxALIGN_CENTER_VERTICAL, 0);
{
mFilterLabel = S.AddVariableText(_("Searc&h:"));
if (!mFilter) {
mFilter = safenew wxTextCtrl(this,
FilterID,
wxT(""),
wxDefaultPosition,
#if defined(__WXMAC__)
wxSize(300, -1),
#else
wxSize(210, -1),
#endif
wxTE_PROCESS_ENTER);
mFilter->SetName(wxStripMenuCodes(mFilterLabel->GetLabel()));
mFilter->Connect(wxEVT_KEY_DOWN,
wxKeyEventHandler(KeyConfigPrefs::OnFilterKeyDown),
NULL,
this);
mFilter->Connect(wxEVT_CHAR,
wxKeyEventHandler(KeyConfigPrefs::OnFilterChar),
NULL,
this);
}
S.AddWindow(mFilter, wxALIGN_NOT | wxALIGN_LEFT);
}
S.EndHorizontalLay();
}
S.EndThreeColumn();
S.AddSpace(-1, 2);
S.StartHorizontalLay(wxEXPAND, 1);
{
if (!mView) {
mView = safenew KeyView(this, CommandsListID);
mView->SetName(_("Bindings"));
}
S.Prop(true);
S.AddWindow(mView, wxEXPAND);
}
S.EndHorizontalLay();
S.StartThreeColumn();
{
if (!mKey) {
mKey = safenew wxTextCtrl(this,
CurrentComboID,
wxT(""),
wxDefaultPosition,
#if defined(__WXMAC__)
wxSize(300, -1),
#else
wxSize(210, -1),
#endif
wxTE_PROCESS_ENTER);
mKey->SetName(_("Short cut"));
mKey->Connect(wxEVT_KEY_DOWN,
wxKeyEventHandler(KeyConfigPrefs::OnHotkeyKeyDown),
NULL,
this);
mKey->Connect(wxEVT_CHAR,
wxKeyEventHandler(KeyConfigPrefs::OnHotkeyChar),
NULL,
this);
mKey->Connect(wxEVT_KILL_FOCUS,
wxFocusEventHandler(KeyConfigPrefs::OnHotkeyKillFocus),
NULL,
this);
}
S.AddWindow(mKey);
/* i18n-hint: (verb)*/
mSet = S.Id(SetButtonID).AddButton(_("&Set"));
mClear = S.Id(ClearButtonID).AddButton(_("Cl&ear"));
}
S.EndThreeColumn();
#if defined(__WXMAC__)
S.AddFixedText(_("Note: Pressing Cmd+Q will quit. All other keys are valid."));
#endif
S.StartThreeColumn();
{
S.Id(ImportButtonID).AddButton(_("&Import..."));
S.Id(ExportButtonID).AddButton(_("&Export..."));
S.Id(AssignDefaultsButtonID).AddButton(_("&Defaults"));
}
S.EndThreeColumn();
}
S.EndStatic();
// Need to layout so that the KeyView is properly sized before populating.
// Otherwise, the initial selection is not scrolled into view.
Layout();
}
void NoiseRemovalDialog::PopulateOrExchange(ShuttleGui & S)
{
S.StartStatic(_("Step 1"));
{
S.AddVariableText(_("Select a few seconds of just noise so Audacity knows what to filter out,\nthen click Get Noise Profile:"));
m_pButton_GetProfile = S.Id(ID_BUTTON_GETPROFILE).AddButton(_("&Get Noise Profile"));
}
S.EndStatic();
S.StartStatic(_("Step 2"));
{
S.AddVariableText(_("Select all of the audio you want filtered, choose how much noise you want\nfiltered out, and then click 'OK' to remove noise.\n"));
S.StartMultiColumn(3, wxEXPAND);
S.SetStretchyCol(2);
{
wxTextValidator vld(wxFILTER_NUMERIC);
mGainT = S.Id(ID_GAIN_TEXT).AddTextBox(_("Noise re&duction (dB):"), wxT(""), 0);
S.SetStyle(wxSL_HORIZONTAL);
mGainT->SetValidator(vld);
mGainS = S.Id(ID_GAIN_SLIDER).AddSlider(wxT(""), 0, GAIN_MAX);
mGainS->SetName(_("Noise reduction"));
mGainS->SetRange(GAIN_MIN, GAIN_MAX);
mGainS->SetSizeHints(150, -1);
mSensitivityT = S.Id(ID_SENSITIVITY_TEXT).AddTextBox(_("&Sensitivity (dB):"),
wxT(""),
0);
S.SetStyle(wxSL_HORIZONTAL);
mSensitivityT->SetValidator(vld);
mSensitivityS = S.Id(ID_SENSITIVITY_SLIDER).AddSlider(wxT(""), 0, SENSITIVITY_MAX);
mSensitivityS->SetName(_("Sensitivity"));
mSensitivityS->SetRange(SENSITIVITY_MIN, SENSITIVITY_MAX);
mSensitivityS->SetSizeHints(150, -1);
mFreqT = S.Id(ID_FREQ_TEXT).AddTextBox(_("Fr&equency smoothing (Hz):"),
wxT(""),
0);
S.SetStyle(wxSL_HORIZONTAL);
mFreqT->SetValidator(vld);
mFreqS = S.Id(ID_FREQ_SLIDER).AddSlider(wxT(""), 0, FREQ_MAX);
mFreqS->SetName(_("Frequency smoothing"));
mFreqS->SetRange(FREQ_MIN, FREQ_MAX);
mFreqS->SetSizeHints(150, -1);
mTimeT = S.Id(ID_TIME_TEXT).AddTextBox(_("Attac&k/decay time (secs):"),
wxT(""),
0);
S.SetStyle(wxSL_HORIZONTAL);
mTimeT->SetValidator(vld);
mTimeS = S.Id(ID_TIME_SLIDER).AddSlider(wxT(""), 0, TIME_MAX);
mTimeS->SetName(_("Attack/decay time"));
mTimeS->SetRange(TIME_MIN, TIME_MAX);
mTimeS->SetSizeHints(150, -1);
S.AddPrompt(_("Noise:"));
mKeepSignal = S.Id(ID_RADIOBUTTON_KEEPSIGNAL)
.AddRadioButton(_("Re&move"));
mKeepNoise = S.Id(ID_RADIOBUTTON_KEEPNOISE)
.AddRadioButtonToGroup(_("&Isolate"));
}
S.EndMultiColumn();
}
S.EndStatic();
}
void ExportMultiple::PopulateOrExchange(ShuttleGui& S)
{
S.SetBorder(5);
S.StartMultiColumn(4, true);
{
wxArrayString formats;
for (size_t i = 0; i < mPlugins.GetCount(); i++) {
formats.Add(mPlugins[i]->GetDescription());
}
S.AddPrompt(_("Export format:"));
mFormat = S.Id(FormatID)
.TieChoice(wxT(""),
wxT("/Export/MultipleFormat"),
gPrefs->Read(wxT("/Export/Format"), wxT("WAV")),
formats,
formats);
S.Id(OptionsID).AddButton(_("Options..."));
S.AddVariableText(wxT(""), false);
S.AddPrompt(_("Export location:"));
mDir = S.Id(DirID)
.TieTextBox(wxT(""),
wxT("/Export/MultiplePath"),
gPrefs->Read(wxT("/Export/Path"), ::wxGetCwd()),
64);
S.Id(ChooseID).AddButton(_("Choose..."));
S.Id(CreateID).AddButton(_("Create"));
}
S.EndMultiColumn();
S.StartHorizontalLay(wxEXPAND, true);
{
S.SetBorder(5);
S.StartStatic(_("Split files based on:"), true);
{
S.StartMultiColumn(2, false);
S.SetStretchyCol(1);
{
// Row 1
S.SetBorder(1);
mLabel = S.Id(LabelID)
.AddRadioButton(wxT(""));
S.SetBorder(3);
mLabelLabel = S.AddVariableText(_("Labels"), false);
// Row 2
S.AddVariableText(wxT(""), false);
mFirst = S.Id(FirstID)
.AddCheckBox(_("Include audio before first label"), wxT("false"));
// Row 3
S.AddVariableText(wxT(""), false);
S.StartHorizontalLay(wxEXPAND, false);
{
mFirstFileLabel = S.AddVariableText(_("First file name:"), true);
mFirstFileName = S.Id(FirstFileNameID)
.TieTextBox(wxT(""),
wxT("/Export/MultipleFirstName"),
wxT(""),
30);
}
S.EndHorizontalLay();
// Row 4
S.SetBorder(1);
mTrack = S.Id(TrackID)
.AddRadioButtonToGroup(wxT(""));
S.SetBorder(3);
mTrackLabel = S.AddVariableText(_("Tracks"), false);
}
S.EndMultiColumn();
}
S.EndStatic();
S.SetBorder(5);
S.StartStatic(_("Name files:"), false);
{
S.StartMultiColumn(2, false);
S.SetStretchyCol(1);
{
// Row 1
S.SetBorder(1);
mByName = S.Id(ByNameID)
.AddRadioButton(wxT(""));
S.SetBorder(3);
mByNameLabel = S.AddVariableText(_("Using Label/Track Name"), false);
// Row 2
S.SetBorder(1);
mByNumber = S.Id(ByNumberID)
.AddRadioButtonToGroup(wxT(""));
S.SetBorder(3);
mByNumberLabel = S.AddVariableText(_("Numbering consecutively"), false);
// Row 3
S.AddVariableText(wxT(""), false);
S.StartHorizontalLay(wxEXPAND, false);
{
mPrefixLabel = S.AddVariableText(_("File name prefix:"), true);
mPrefix = S.Id(PrefixID)
.TieTextBox(wxT(""),
wxT("/Export/MultiplePrefix"),
wxT(""),
30);
}
S.EndHorizontalLay();
}
S.EndMultiColumn();
}
S.EndStatic();
}
S.EndHorizontalLay();
S.SetBorder(5);
S.StartHorizontalLay(wxEXPAND, false);
{
mOverwrite = S.Id(OverwriteID)
.AddCheckBox(_("Overwrite existing files"), wxT("true"));
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxALIGN_CENTER, false);
{
#if defined(__WXGTK20__) || defined(__WXMAC__)
S.Id(wxID_CANCEL).AddButton(_("&Cancel"));
mExport = S.Id(wxID_OK).AddButton(_("E&xport"));
#else
mExport = S.Id(wxID_OK).AddButton(_("E&xport"));
S.Id(wxID_CANCEL).AddButton(_("&Cancel"));
#endif
mExport->SetDefault();
}
S.EndHorizontalLay();
}
void EffectScienFilter::PopulateOrExchange(ShuttleGui & S)
{
wxWindow *parent = S.GetParent();
S.AddSpace(5);
S.SetSizerProportion(1);
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
S.SetStretchyRow(0);
// -------------------------------------------------------------------
// ROW 1: Freq response panel and sliders for vertical scale
// -------------------------------------------------------------------
S.StartVerticalLay();
{
mdBRuler = new RulerPanel(parent, wxID_ANY);
mdBRuler->ruler.SetBounds(0, 0, 100, 100); // Ruler can't handle small sizes
mdBRuler->ruler.SetOrientation(wxVERTICAL);
mdBRuler->ruler.SetRange(30.0, -120.0);
mdBRuler->ruler.SetFormat(Ruler::LinearDBFormat);
mdBRuler->ruler.SetUnits(_("dB"));
mdBRuler->ruler.SetLabelEdges(true);
int w;
mdBRuler->ruler.GetMaxSize(&w, NULL);
mdBRuler->SetSize(wxSize(w, 150)); // height needed for wxGTK
S.SetBorder(1);
S.AddSpace(1, 1);
S.Prop(1);
S.AddWindow(mdBRuler, wxALIGN_RIGHT | wxTOP);
S.AddSpace(1, 1);
}
S.EndVerticalLay();
mPanel = new EffectScienFilterPanel(this, parent);
mPanel->SetFreqRange(mLoFreq, mNyquist);
S.SetBorder(5);
S.Prop(1);
S.AddWindow(mPanel, wxEXPAND | wxRIGHT);
S.SetSizeHints(-1, -1);
S.StartVerticalLay();
{
S.AddVariableText(_("+ dB"), false, wxCENTER);
S.SetStyle(wxSL_VERTICAL | wxSL_INVERSE);
mdBMaxSlider = S.Id(ID_dBMax).AddSlider(wxT(""), 10, 20, 0);
#if wxUSE_ACCESSIBILITY
mdBMaxSlider->SetName(_("Max dB"));
mdBMaxSlider->SetAccessible(new SliderAx(mdBMaxSlider, wxString(wxT("%d ")) + _("dB")));
#endif
S.SetStyle(wxSL_VERTICAL | wxSL_INVERSE);
mdBMinSlider = S.Id(ID_dBMin).AddSlider(wxT(""), -10, -10, -120);
S.AddVariableText(_("- dB"), false, wxCENTER);
#if wxUSE_ACCESSIBILITY
mdBMinSlider->SetName(_("Min dB"));
mdBMinSlider->SetAccessible(new SliderAx(mdBMinSlider, wxString(wxT("%d ")) + _("dB")));
#endif
}
S.EndVerticalLay();
// -------------------------------------------------------------------
// ROW 2: Frequency ruler
// -------------------------------------------------------------------
S.AddSpace(1, 1);
mfreqRuler = new RulerPanel(parent, wxID_ANY);
mfreqRuler->ruler.SetBounds(0, 0, 100, 100); // Ruler can't handle small sizes
mfreqRuler->ruler.SetOrientation(wxHORIZONTAL);
mfreqRuler->ruler.SetLog(true);
mfreqRuler->ruler.SetRange(mLoFreq, mNyquist);
mfreqRuler->ruler.SetFormat(Ruler::IntFormat);
mfreqRuler->ruler.SetUnits(wxT(""));
mfreqRuler->ruler.SetFlip(true);
mfreqRuler->ruler.SetLabelEdges(true);
int h;
mfreqRuler->ruler.GetMaxSize(NULL, &h);
mfreqRuler->SetMinSize(wxSize(-1, h));
S.Prop(1);
S.AddWindow(mfreqRuler, wxEXPAND | wxALIGN_LEFT | wxRIGHT);
S.AddSpace(1, 1);
// -------------------------------------------------------------------
// ROW 3 and 4: Type, Order, Ripple, Subtype, Cutoff
// -------------------------------------------------------------------
S.AddSpace(1, 1);
S.SetSizerProportion(0);
S.StartMultiColumn(8, wxALIGN_CENTER);
{
wxASSERT(kNumTypes == WXSIZEOF(kTypeStrings));
wxArrayString typeChoices;
for (int i = 0; i < kNumTypes; i++)
{
typeChoices.Add(wxGetTranslation(kTypeStrings[i]));
}
mFilterTypeCtl = S.Id(ID_Type).AddChoice(_("&Filter Type:"), wxT(""), &typeChoices);
mFilterTypeCtl->SetValidator(wxGenericValidator(&mFilterType));
S.SetSizeHints(-1, -1);
wxArrayString orders;
for (int i = 1; i <= 10; i++)
{
orders.Add(wxString::Format(wxT("%d"), i));
}
/*i18n-hint: 'Order' means the complexity of the filter, and is a number between 1 and 10.*/
mFilterOrderCtl = S.Id(ID_Order).AddChoice(_("O&rder:"), wxT(""), &orders);
mFilterOrderCtl->SetValidator(wxGenericValidator(&mOrderIndex));
S.SetSizeHints(-1, -1);
S.AddSpace(1, 1);
FloatingPointValidator<float> vldRipple(1, &mRipple);
vldRipple.SetRange(MIN_Passband, MAX_Passband);
mRippleCtlP = S.AddVariableText(_("&Passband Ripple:"), false, wxALL | wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
mRippleCtl = S.Id(ID_Ripple).AddTextBox(wxT(""), wxT(""), 10);
mRippleCtl->SetName(_("Passband Ripple (dB)"));
mRippleCtl->SetValidator(vldRipple);
mRippleCtlU = S.AddVariableText(_("dB"), false, wxALL | wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
wxASSERT(kNumSubTypes == WXSIZEOF(kSubTypeStrings));
wxArrayString subTypeChoices;
for (int i = 0; i < kNumSubTypes; i++)
{
subTypeChoices.Add(wxGetTranslation(kSubTypeStrings[i]));
}
mFilterSubTypeCtl = S.Id(ID_SubType).AddChoice(_("&Subtype:"), wxT(""), &subTypeChoices);
mFilterSubTypeCtl->SetValidator(wxGenericValidator(&mFilterSubtype));
S.SetSizeHints(-1, -1);
FloatingPointValidator<float> vldCutoff(1, &mCutoff);
vldCutoff.SetRange(MIN_Cutoff, mNyquist - 1);
mCutoffCtl = S.Id(ID_Cutoff).AddTextBox(_("C&utoff:"), wxT(""), 10);
mCutoffCtl->SetName(_("Cutoff (Hz)"));
mCutoffCtl->SetValidator(vldCutoff);
S.AddUnits(_("Hz"));
FloatingPointValidator<float> vldStopbandRipple(1, &mStopbandRipple);
vldStopbandRipple.SetRange(MIN_Stopband, MAX_Stopband);
mStopbandRippleCtlP = S.AddVariableText(_("Minimum S&topband Attenuation:"), false, wxALL | wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
mStopbandRippleCtl = S.Id(ID_StopbandRipple).AddTextBox(wxT(""), wxT(""), 10);
mStopbandRippleCtl->SetName(_("Minimum S&topband Attenuation (dB)"));
mStopbandRippleCtl->SetValidator(vldStopbandRipple);
mStopbandRippleCtlU = S.AddVariableText(_("dB"), false, wxALL | wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
}
S.EndMultiColumn();
S.AddSpace(1, 1);
}
S.EndMultiColumn();
mFilterTypeCtl->SetFocus();
return;
}
void EffectDistortion::PopulateOrExchange(ShuttleGui & S)
{
S.AddSpace(0, 5);
S.StartVerticalLay();
{
S.StartMultiColumn(4, wxCENTER);
{
mTypeChoiceCtrl = S.Id(ID_Type).AddChoice(_("Distortion type:"), wxT(""), &mTableTypes);
mTypeChoiceCtrl->SetValidator(wxGenericValidator(&mParams.mTableChoiceIndx));
S.SetSizeHints(-1, -1);
mDCBlockCheckBox = S.Id(ID_DCBlock).AddCheckBox(_("DC blocking filter"),
DEF_DCBlock ? wxT("true") : wxT("false"));
}
S.EndMultiColumn();
S.AddSpace(0, 10);
S.StartStatic(_("Threshold controls"));
{
S.StartMultiColumn(4, wxEXPAND);
S.SetStretchyCol(2);
{
// Allow space for first Column
S.AddSpace(250,0); S.AddSpace(0,0); S.AddSpace(0,0); S.AddSpace(0,0);
// Upper threshold control
mThresholdTxt = S.AddVariableText(defaultLabel[0], false, wxALIGN_CENTER_VERTICAL | wxALIGN_LEFT);
FloatingPointValidator<double> vldThreshold(2, &mParams.mThreshold_dB);
vldThreshold.SetRange(MIN_Threshold_dB, MAX_Threshold_dB);
mThresholdT = S.Id(ID_Threshold).AddTextBox(wxT(""), wxT(""), 10);
mThresholdT->SetName(defaultLabel[0]);
mThresholdT->SetValidator(vldThreshold);
S.SetStyle(wxSL_HORIZONTAL);
double maxLin = DB_TO_LINEAR(MAX_Threshold_dB) * SCL_Threshold_dB;
double minLin = DB_TO_LINEAR(MIN_Threshold_dB) * SCL_Threshold_dB;
mThresholdS = S.Id(ID_Threshold).AddSlider(wxT(""), 0, maxLin, minLin);
mThresholdS->SetName(defaultLabel[0]);
S.AddSpace(20, 0);
// Noise floor control
mNoiseFloorTxt = S.AddVariableText(defaultLabel[1], false, wxALIGN_CENTER_VERTICAL | wxALIGN_LEFT);
FloatingPointValidator<double> vldfloor(2, &mParams.mNoiseFloor);
vldfloor.SetRange(MIN_NoiseFloor, MAX_NoiseFloor);
mNoiseFloorT = S.Id(ID_NoiseFloor).AddTextBox(wxT(""), wxT(""), 10);
mNoiseFloorT->SetName(defaultLabel[1]);
mNoiseFloorT->SetValidator(vldfloor);
S.SetStyle(wxSL_HORIZONTAL);
mNoiseFloorS = S.Id(ID_NoiseFloor).AddSlider(wxT(""), 0, MAX_NoiseFloor, MIN_NoiseFloor);
mNoiseFloorS->SetName(defaultLabel[1]);
S.AddSpace(20, 0);
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Parameter controls"));
{
S.StartMultiColumn(4, wxEXPAND);
S.SetStretchyCol(2);
{
// Allow space for first Column
S.AddSpace(250,0); S.AddSpace(0,0); S.AddSpace(0,0); S.AddSpace(0,0);
// Parameter1 control
mParam1Txt = S.AddVariableText(defaultLabel[2], false, wxALIGN_CENTER_VERTICAL | wxALIGN_LEFT);
FloatingPointValidator<double> vldparam1(2, &mParams.mParam1);
vldparam1.SetRange(MIN_Param1, MAX_Param1);
mParam1T = S.Id(ID_Param1).AddTextBox(wxT(""), wxT(""), 10);
mParam1T->SetName(defaultLabel[2]);
mParam1T->SetValidator(vldparam1);
S.SetStyle(wxSL_HORIZONTAL);
mParam1S = S.Id(ID_Param1).AddSlider(wxT(""), 0, MAX_Param1, MIN_Param1);
mParam1S->SetName(defaultLabel[2]);
S.AddSpace(20, 0);
// Parameter2 control
mParam2Txt = S.AddVariableText(defaultLabel[3], false, wxALIGN_CENTER_VERTICAL | wxALIGN_LEFT);
FloatingPointValidator<double> vldParam2(2, &mParams.mParam2);
vldParam2.SetRange(MIN_Param2, MAX_Param2);
mParam2T = S.Id(ID_Param2).AddTextBox(wxT(""), wxT(""), 10);
mParam2T->SetName(defaultLabel[3]);
mParam2T->SetValidator(vldParam2);
S.SetStyle(wxSL_HORIZONTAL);
mParam2S = S.Id(ID_Param2).AddSlider(wxT(""), 0, MAX_Param2, MIN_Param2);
mParam2S->SetName(defaultLabel[3]);
S.AddSpace(20, 0);
// Repeats control
mRepeatsTxt = S.AddVariableText(defaultLabel[4], false, wxALIGN_CENTER_VERTICAL | wxALIGN_LEFT);
IntegerValidator<int>vldRepeats(&mParams.mRepeats);
vldRepeats.SetRange(MIN_Repeats, MAX_Repeats);
mRepeatsT = S.Id(ID_Repeats).AddTextBox(wxT(""), wxT(""), 10);
mRepeatsT->SetName(defaultLabel[4]);
mRepeatsT->SetValidator(vldRepeats);
S.SetStyle(wxSL_HORIZONTAL);
mRepeatsS = S.Id(ID_Repeats).AddSlider(wxT(""), DEF_Repeats, MAX_Repeats, MIN_Repeats);
mRepeatsS->SetName(defaultLabel[4]);
S.AddSpace(20, 0);
}
S.EndMultiColumn();
}
S.EndStatic();
}
S.EndVerticalLay();
return;
}
