void ProjectsPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("When saving a project that depends on other audio files"));
{
S.StartRadioButtonGroup(wxT("/FileFormats/SaveProjectWithDependencies"), wxT("ask"));
{
S.TieRadioButton(_("&Always copy all audio into project (safest)"),
wxT("copy"));
S.TieRadioButton(_("Do ¬ copy any audio"),
wxT("never"));
S.TieRadioButton(_("As&k user"),
wxT("ask"));
}
S.EndRadioButtonGroup();
}
S.EndStatic();
}
/// Normally in classes derived from PrefsPanel this function
/// is used both to populate the panel and to exchange data with it.
/// With KeyConfigPrefs all the exchanges are handled specially,
/// so this is only used in populating the panel.
void KeyConfigPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Key Bindings"), 1);
{
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
S.StartHorizontalLay(wxALIGN_LEFT|wxALIGN_CENTER_VERTICAL, 0);
{
S.AddTitle(_("View by:"));
S.StartRadioButtonGroup(wxT("/Prefs/KeyConfig/ViewBy"), wxT("tree"));
{
mViewByTree = S.Id(ViewByTreeID).TieRadioButton(_("&Tree"), wxT("tree"));
mViewByTree->SetName(_("View by tree"));
mViewByName = S.Id(ViewByNameID).TieRadioButton(_("&Name"), wxT("name"));
mViewByName->SetName(_("View by name"));
mViewByKey = S.Id(ViewByKeyID).TieRadioButton(_("&Key"), wxT("key"));
mViewByKey->SetName(_("View by key"));
}
S.EndRadioButtonGroup();
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxALIGN_CENTER|wxALIGN_CENTER_VERTICAL, 0);
{
// just a spacer
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxALIGN_RIGHT|wxALIGN_CENTER_VERTICAL, 0);
{
mFilterLabel = S.AddVariableText(_("Searc&h:"));
if (!mFilter) {
mFilter = safenew wxTextCtrl(this,
FilterID,
wxT(""),
wxDefaultPosition,
#if defined(__WXMAC__)
wxSize(300, -1),
#else
wxSize(210, -1),
#endif
wxTE_PROCESS_ENTER);
mFilter->SetName(wxStripMenuCodes(mFilterLabel->GetLabel()));
mFilter->Connect(wxEVT_KEY_DOWN,
wxKeyEventHandler(KeyConfigPrefs::OnFilterKeyDown),
NULL,
this);
mFilter->Connect(wxEVT_CHAR,
wxKeyEventHandler(KeyConfigPrefs::OnFilterChar),
NULL,
this);
}
S.AddWindow(mFilter, wxALIGN_NOT | wxALIGN_LEFT);
}
S.EndHorizontalLay();
}
S.EndThreeColumn();
S.AddSpace(-1, 2);
S.StartHorizontalLay(wxEXPAND, 1);
{
if (!mView) {
mView = safenew KeyView(this, CommandsListID);
mView->SetName(_("Bindings"));
}
S.Prop(true);
S.AddWindow(mView, wxEXPAND);
}
S.EndHorizontalLay();
S.StartThreeColumn();
{
if (!mKey) {
mKey = safenew wxTextCtrl(this,
CurrentComboID,
wxT(""),
wxDefaultPosition,
#if defined(__WXMAC__)
wxSize(300, -1),
#else
wxSize(210, -1),
#endif
wxTE_PROCESS_ENTER);
mKey->SetName(_("Short cut"));
mKey->Connect(wxEVT_KEY_DOWN,
wxKeyEventHandler(KeyConfigPrefs::OnHotkeyKeyDown),
NULL,
this);
mKey->Connect(wxEVT_CHAR,
wxKeyEventHandler(KeyConfigPrefs::OnHotkeyChar),
NULL,
this);
mKey->Connect(wxEVT_KILL_FOCUS,
wxFocusEventHandler(KeyConfigPrefs::OnHotkeyKillFocus),
NULL,
this);
}
S.AddWindow(mKey);
/* i18n-hint: (verb)*/
mSet = S.Id(SetButtonID).AddButton(_("&Set"));
mClear = S.Id(ClearButtonID).AddButton(_("Cl&ear"));
}
S.EndThreeColumn();
#if defined(__WXMAC__)
S.AddFixedText(_("Note: Pressing Cmd+Q will quit. All other keys are valid."));
#endif
S.StartThreeColumn();
{
S.Id(ImportButtonID).AddButton(_("&Import..."));
S.Id(ExportButtonID).AddButton(_("&Export..."));
S.Id(AssignDefaultsButtonID).AddButton(_("&Defaults"));
}
S.EndThreeColumn();
}
S.EndStatic();
// Need to layout so that the KeyView is properly sized before populating.
// Otherwise, the initial selection is not scrolled into view.
Layout();
}
void SpectrumPrefs::PopulateOrExchange( ShuttleGui & S )
{
wxArrayString windowTypeList;
for(int i=0; i<NumWindowFuncs(); i++)
windowTypeList.Add(WindowFuncName(i));
S.SetBorder( 2 );
S.StartHorizontalLay(wxEXPAND, 0 );
S.StartStatic( _("FFT Size"), 0 );
{
S.StartRadioButtonGroup( wxT("/Spectrum/FFTSize"), 256 );
S.TieRadioButton( _("8 - most wideband"), 8);
S.TieRadioButton( wxT("16"), 16);
S.TieRadioButton( wxT("32"), 32);
S.TieRadioButton( wxT("64"), 64);
S.TieRadioButton( wxT("128"), 128);
S.TieRadioButton( _("256 - default"), 256);
S.TieRadioButton( wxT("512"), 512);
S.TieRadioButton( wxT("1024"), 1024);
S.TieRadioButton( wxT("2048"), 2048);
#ifdef EXPERIMENTAL_FIND_NOTES
S.TieRadioButton( wxT("4096"), 4096);
S.TieRadioButton( wxT("8192"), 8192);
S.TieRadioButton( wxT("16384"), 16384);
S.TieRadioButton( _("32768 - most narrowband"),32768);
#else
S.TieRadioButton( _("4096 - most narrowband"),4096);
#endif //LOGARITHMIC_SPECTRUM
S.EndRadioButtonGroup();
// add choice for windowtype
S.StartMultiColumn(2, wxCENTER);
{
S.TieChoice( _("Window type:"), windowType, &windowTypeList);
S.SetSizeHints(-1,-1);
}
S.EndMultiColumn();
}
S.EndStatic();
#ifdef EXPERIMENTAL_FFT_SKIP_POINTS
S.StartHorizontalLay(wxEXPAND, 0 );
S.StartStatic( _("FFT Skip Points"), 0 );
{
S.StartRadioButtonGroup(wxT("/Spectrum/FFTSkipPoints"), 0);
S.TieRadioButton(wxT("0"), 0);
S.TieRadioButton(wxT("1"), 1);
S.TieRadioButton(wxT("3"), 3);
S.TieRadioButton(wxT("7"), 7);
S.TieRadioButton(wxT("15"), 15);
S.TieRadioButton(wxT("31"), 31);
S.TieRadioButton(wxT("63"), 63);
S.EndRadioButtonGroup();
}
S.EndStatic();
#endif //EXPERIMENTAL_FFT_SKIP_POINTS
S.StartStatic( _("Display"),1 );
{
// JC: For layout of mixtures of controls I prefer checkboxes on the right,
// with everything in two columns over what we have here.
S.TieCheckBox( _("&Grayscale"), wxT("/Spectrum/Grayscale"), false);
S.StartTwoColumn(); // 2 cols because we have a control with a separate label.
S.Id(ID_MINFREQUENCY).TieTextBox(
_("Minimum Frequency (Hz):"), // prompt
minFreqStr, // String to exchange with
12 // max number of characters (used to size the control).
);
S.Id(ID_MAXFREQUENCY).TieTextBox(
_("Maximum Frequency (Hz):"), // prompt
maxFreqStr, // String to exchange with
12 // max number of characters (used to size the control).
);
S.EndTwoColumn();
#ifdef EXPERIMENTAL_FFT_Y_GRID
S.TieCheckBox( _("&Y-Grid"), wxT("/Spectrum/FFTYGrid"), false);
#endif //EXPERIMENTAL_FFT_Y_GRID
#ifdef EXPERIMENTAL_FIND_NOTES
S.TieCheckBox( _("&Find Notes"), wxT("/Spectrum/FFTFindNotes"), false);
S.TieCheckBox( _("&Quantize Notes"), wxT("/Spectrum/FindNotesQuantize"), false);
S.StartTwoColumn(); // 2 cols because we have a control with a separate label.
S.Id(ID_FIND_NOTES_MIN_A).TieTextBox(
_("Minimum Amplitude (dB):"), // prompt
findNotesMinAStr, // String to exchange with
8 // max number of characters (used to size the control).
);
S.Id(ID_FIND_NOTES_N).TieTextBox(
_("Max. Number of Notes (1..128):"), // prompt
findNotesNStr, // String to exchange with
8 // max number of characters (used to size the control).
);
S.EndTwoColumn();
#endif //EXPERIMENTAL_FIND_NOTES
}
S.EndStatic();
S.EndHorizontalLay();
}
