void main(void)
{
WDTCTL = WDTPW + WDTHOLD; // Stop the watchdog
__enable_interrupt(); // Enable general interrupts
Board_init(); // Configure's the F5529 EXP board's I/Os
// Initialize power/clocks for use with USB
SetVCore(3); // The USB module requires that VCore be set to highest setting, independent of MCLK freq
ClockUSB();
disk_initialize(0); // SD-cards must go through a setup sequence after powerup. This FatFs call does this.
USB_init(); // Initializes the USB API, and prepares the USB module to detect USB insertion/removal events
USB_setEnabledEvents(kUSB_allUsbEvents); // Enable all USB events
// The data interchange buffer (used when handling SCSI READ/WRITE) is declared by the application, and
// registered with the API using this function. This allows it to be assigned dynamically, giving
// the application more control over memory management.
USBMSC_registerBufInfo(&RW_dataBuf[0], NULL, sizeof(RW_dataBuf));
// The API maintains an instance of the USBMSC_RWbuf_Info structure. If double-buffering were used, it would
// maintain one for both the X and Y side. (This version of the API only supports single-buffering,
// so only one structure is maintained.) This is a shared resource between the API and application; the
// application must request the pointers.
RWbuf_info = USBMSC_fetchInfoStruct();
// USBMSC_updateMediaInfo() must be called prior to USB connection. We check if the card is present, and if so, pull its size
// and bytes per block.
// LUN0
mediaInfo.mediaPresent = 0x01; // The medium is present, because internal flash is non-removable.
mediaInfo.mediaChanged = 0x00; // It can't change, because it's in internal memory, which is always present.
mediaInfo.writeProtected = 0x00; // It's not write-protected
mediaInfo.lastBlockLba = 774; // 774 blocks in the volume. (This number is also found twice in the volume itself; see mscFseData.c. They should match.)
mediaInfo.bytesPerBlock = BYTES_PER_BLOCK; // 512 bytes per block. (This number is also found in the volume itself; see mscFseData.c. They should match.)
USBMSC_updateMediaInfo(0, &mediaInfo);
// LUN1
if(detectCard())
mediaInfo.mediaPresent = kUSBMSC_MEDIA_PRESENT;
else mediaInfo.mediaPresent = kUSBMSC_MEDIA_NOT_PRESENT;
mediaInfo.mediaChanged = 0x00;
mediaInfo.writeProtected = 0x00;
disk_ioctl(0,GET_SECTOR_COUNT,&mediaInfo.lastBlockLba); // Returns the number of blocks (sectors) in the media.
mediaInfo.bytesPerBlock = BYTES_PER_BLOCK; // Block size will always be 512
USBMSC_updateMediaInfo(1, &mediaInfo);
// At compile-time for this demo, there will be one file on the volume. The root directory and data cluster
// for this file need to be initialized.
//flashWrite_LBA(Root_Dir, (BYTE*)Root_Dir_init);
//flashWrite_LBA(Data559, (BYTE*)Data559_init);
// Configure Timer_A0 to prompt detection of the SD card every second
TA0CCTL0 = CCIE; // Enable interrupt
TA0CCR0 = 32768; // Clock will be 32kHz, so we set the int to occur when it counts to 32768
TA0CTL = TASSEL_1 + MC_1 + TACLR; // ACLK = 32kHz, up mode, clear TAR... go!
// If USB is already connected when the program starts up, then there won't be a USB_handleVbusOnEvent().
// So we need to check for it, and manually connect if the host is already present.
if (USB_connectionInfo() & kUSB_vbusPresent)
{
if (USB_enable() == kUSB_succeed)
{
USB_reset();
USB_connect();
}
}
while(1)
{
BYTE ReceiveError=0, SendError=0;
WORD count;
switch(USB_connectionState())
{
case ST_USB_DISCONNECTED:
__bis_SR_register(LPM3_bits + GIE); // Enter LPM3 until VBUS-on event
// Check if the reason we woke was a button press; and if so, log a new piece of data.
if(fS1ButtonEvent)
{
// Build string
char str[14] = "Data entry #0\n";
str[12] = logCnt++; // Number the entries 0 through....?
memcpy(RW_dataBuf, Data559, BYTES_PER_BLOCK); // Copy data block 559 from flash to RAM buffer
memcpy(&RW_dataBuf[DataCnt], str, sizeof(str)); // Write the new entry to the RAM buffer
flashWrite_LBA((PBYTE)Data559, RW_dataBuf); // Copy it back to flash
DataCnt += sizeof(str); // Increment the index past the new entry
if((DataCnt + sizeof(str)>= BYTES_PER_BLOCK)) // Roll index back to 0, if no more room in the block
DataCnt = 0;
fS1ButtonEvent = 0;
}
break;
case ST_USB_CONNECTED_NO_ENUM:
break;
case ST_ENUM_ACTIVE:
// Call USBMSC_poll() to initiate handling of any received SCSI commands. Disable interrupts
// during this function, to avoid conflicts arising from SCSI commands being received from the host
// AFTER decision to enter LPM is made, but BEFORE it's actually entered (in other words, avoid
// sleeping accidentally).
__disable_interrupt();
if((USBMSC_poll() == kUSBMSC_okToSleep) && (!bDetectCard))
{
__bis_SR_register(LPM0_bits + GIE); // Enable interrupts atomically with LPM0 entry
}
__enable_interrupt();
// If the API needs the application to process a buffer, it will keep the CPU awake by returning kUSBMSC_processBuffer
// from USBMSC_poll(). The application should then check the 'operation' field of all defined USBMSC_RWbuf_Info
// structure instances. If any of them is non-null, then an operation needs to be processed. A value of
// kUSBMSC_READ indicates the API is waiting for the application to fetch data from the storage volume, in response
// to a SCSI READ command from the USB host. After the application does this, it must indicate whether the
// operation succeeded, and then close the buffer operation by calling USBMSC_bufferProcessed().
while(RWbuf_info->operation == kUSBMSC_READ)
{
switch(RWbuf_info->lun)
{
case 0:
RWbuf_info->returnCode = Read_LBA(RWbuf_info->lba, RWbuf_info->bufferAddr, RWbuf_info->lbCount); // Fetch a block from the medium, using file system emulation
USBMSC_bufferProcessed(); // Close the buffer operation
break;
case 1:
read_LUN1();
break;
}
}
// Everything in this section is analogous to READs. Reference the comments above.
while(RWbuf_info->operation == kUSBMSC_WRITE)
{
switch(RWbuf_info->lun)
{
case 0:
RWbuf_info->returnCode = Write_LBA(RWbuf_info->lba, RWbuf_info->bufferAddr, RWbuf_info->lbCount); // Write the block to the medium, using file system emulation
USBMSC_bufferProcessed(); // Close the buffer operation
break;
case 1:
write_LUN1();
break;
}
}
// Every second, the Timer_A ISR sets this flag. The checking can't be done from within the timer ISR, because the
// checking enables interrupts, and this is not a recommended practice due to the risk of nested interrupts.
if(bDetectCard)
{
checkInsertionRemoval();
bDetectCard = 0x00; // Clear the flag, until the next timer ISR
}
if(bHID_DataReceived_event) //Message is received from HID application
{
bHID_DataReceived_event = FALSE; // Clear flag early -- just in case execution breaks below because of an error
count = hidReceiveDataInBuffer((BYTE*)dataBuffer,BUFFER_SIZE,HID0_INTFNUM);
strncat(wholeString," \r\nRx->",7);
strncat(wholeString,(char*)dataBuffer,count);
strncat(wholeString," \r\n ",4);
if(cdcSendDataInBackground((BYTE*)wholeString,strlen(wholeString),CDC0_INTFNUM,1)) // Send message to other CDC App
{
SendError = 0x01;
break;
}
memset(wholeString,0,MAX_STR_LENGTH); // Clear wholeString
}
if(bCDC_DataReceived_event) //Message is received from CDC application
{
bCDC_DataReceived_event = FALSE; // Clear flag early -- just in case execution breaks below because of an error
cdcReceiveDataInBuffer((BYTE*)wholeString,MAX_STR_LENGTH,CDC0_INTFNUM);
ASCII(wholeString);
if(hidSendDataInBackground((BYTE*)wholeString,strlen(wholeString),HID0_INTFNUM,1)) // Send message to HID App
{
SendError = 0x01; // Something went wrong -- exit
break;
}
memset(wholeString,0,MAX_STR_LENGTH); // Clear wholeString
}
break;
case ST_ENUM_SUSPENDED:
__bis_SR_register(LPM3_bits + GIE); // Enter LPM3, until a resume or VBUS-off event
break;
case ST_ENUM_IN_PROGRESS:
break;
case ST_ERROR:
break;
default:;
}
if(ReceiveError || SendError)
{
//TO DO: User can place code here to handle error
}
}
}
void MassStorage(void)
{
buttonsPressed = 0;
SFRIE1 &= ~OFIE;
disk_initialize(0); // Initialize Disk Drive #0
SFRIE1 |= OFIE;
DEBUG("Init clock\r\n");
ClockUSB();
DEBUG("Init USB\r\n");
USB_init(); // Initialize the USB module
P1OUT |= BIT1;
// Enable all USB events
USB_setEnabledEvents(kUSB_allUsbEvents);
// Clal Initialization Function
DEBUG("Init MSC\r\n");
msc_Init();
P1OUT |= BIT2;
// If USB is already connected when the program starts up, then there won't be a
// USB_handleVbusOnEvent().
// So we need to check for it, and manually connect if the host is already present.
if (USB_connectionInfo() & kUSB_vbusPresent)
{
if (USB_enable() == kUSB_succeed)
{
USB_reset();
USB_connect();
P1OUT |= BIT3;
}
}
while (1)
{
switch (USB_connectionState())
{
DEBUG("Connection state: %u\r\n", USB_connectionState());
case ST_USB_DISCONNECTED:
//__bis_SR_register(LPM3_bits + GIE); // Enter LPM3 until VBUS-on event
_NOP();
break;
case ST_USB_CONNECTED_NO_ENUM:
break;
case ST_ENUM_ACTIVE:
msc_Loop();
break;
case ST_ENUM_SUSPENDED:
//__bis_SR_register(LPM3_bits + GIE); // Enter LPM3, until a resume or VBUS-off
// event
break;
case ST_ENUM_IN_PROGRESS:
break;
case ST_ERROR:
break;
default:;
}
}
DEBUG("Done with MassStorage\r\n");
buttonsPressed = 0;
Board_ledOff(LED_ALL);
USB_disable();
SFRIE1 &= ~OFIE;
Init_FLL_Settle(25000, 762); // Return to normal clock settings
SFRIE1 |= OFIE;
}
