int main(void) { /* USER CODE BEGIN 1 */ /* USER CODE END 1 */ /* MCU Configuration----------------------------------------------------------*/ /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ HAL_Init(); /* Configure the system clock */ SystemClock_Config(); /* Initialize all configured peripherals */ MX_GPIO_Init(); MX_DMA_Init(); MX_I2C3_Init(); MX_TIM1_Init(); MX_TIM2_Init(); MX_TIM3_Init(); MX_TIM4_Init(); MX_TIM5_Init(); MX_USART1_UART_Init(); MX_USART2_UART_Init(); MX_TIM11_Init(); /* USER CODE BEGIN 2 */ HAL_TIM_Base_Start_IT(&htim11); // 100 msec timer initSonar( MAX_SONAR); initSerOutput(); /* USER CODE END 2 */ /* Infinite loop */ /* USER CODE BEGIN WHILE */ while (1) { /* USER CODE END WHILE */ /* USER CODE BEGIN 3 */ // >>>>> Sonar reading triggerSonar( COUPLE_0_2); HAL_Delay(49); triggerSonar( COUPLE_1_3); HAL_Delay(49); // <<<<< Sonar reading // >>>>> Serial Output convertMeasures(); sendMeasures(); // <<<<< Serial Output } /* USER CODE END 3 */ }
int main(void) { /* USER CODE BEGIN 1 */ /* USER CODE END 1 */ /* MCU Configuration----------------------------------------------------------*/ /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ HAL_Init(); /* Configure the system clock */ SystemClock_Config(); /* Initialize all configured peripherals */ MX_GPIO_Init(); MX_DMA_Init(); MX_SPI1_Init(); MX_TIM2_Init(); MX_TIM3_Init(); MX_TIM7_Init(); MX_TIM10_Init(); MX_TIM11_Init(); MX_TIM13_Init(); MX_TIM14_Init(); MX_USART1_UART_Init(); MX_USART2_UART_Init(); /* USER CODE BEGIN 2 */ HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_1); //Motor1 HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_4); //Motor2 HAL_TIM_PWM_Start(&htim3, TIM_CHANNEL_1); //Motor3 HAL_TIM_PWM_Start(&htim3, TIM_CHANNEL_4); //Motor4 /* USER CODE END 2 */ /* Infinite loop */ /* USER CODE BEGIN WHILE */ while (1) { /* USER CODE END WHILE */ /* USER CODE BEGIN 3 */ } /* USER CODE END 3 */ }
int main(void) { /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ HAL_Init(); /* Configure the system clock */ SystemClock_Config(); /* Initialize all configured peripherals */ MX_GPIO_Init(); MX_DMA_Init(); MX_ADC1_Init(); MX_I2C1_Init(); MX_TIM10_Init(); MX_TIM11_Init(); MX_USART1_UART_Init(); xTaskCreate(task_safety, "Safety", 350, NULL, 1, NULL); xTaskCreate(task_master, "Master", 350, NULL, 1, NULL); xTaskCreate(task_control, "Control", 1000, NULL, 3, NULL); xTaskCreate(task_test, "Test", 500, NULL, 4, NULL); update_coefficients_QUEUE = xQueueCreate(3, sizeof(uint8_t)); control_sig_QUEUE = xQueueCreate(3, sizeof(int16_t));; vSemaphoreCreateBinary(testing_SEMAPHORE); vSemaphoreCreateBinary(data_SEMAPHORE); osKernelStart(); /* We should never get here as control is now taken by the scheduler */ /* Infinite loop */ while (1) { } }
int main(void) { /* USER CODE BEGIN 1 */ CMDLINE_CONTEXT cmd_context; const char *zhonx_info = (char *)CONFIG_ZHONX_INFO_ADDR; /* USER CODE END 1 */ /* MCU Configuration----------------------------------------------------------*/ /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ HAL_Init(); /* Configure the system clock */ SystemClock_Config(); /* Initialize all configured peripherals */ MX_GPIO_Init(); MX_DMA_Init(); MX_ADC1_Init(); MX_ADC2_Init(); MX_ADC3_Init(); MX_I2C1_Init(); MX_RNG_Init(); MX_TIM1_Init(); MX_TIM2_Init(); MX_TIM3_Init(); MX_TIM4_Init(); MX_TIM5_Init(); MX_TIM6_Init(); MX_TIM7_Init(); MX_TIM8_Init(); MX_TIM11_Init(); MX_USART3_UART_Init(); /* USER CODE BEGIN 2 */ expanderInit(); HAL_Delay(100); mainControlInit(); ssd1306Init(0); timesBaseInit(); ledPowerBlink(990, 10); settingsInit(); mulimeterInit(); bluetoothInit(); toneInit(); spyPostInit(); positionControlSetPositionType(GYRO); mainControlSetFollowType(NO_FOLLOW); toneSetVolulme(100); tone(F4, 50); toneItMode(A4, 50); // Register Output callback cmd_context.out = blockingPrintf; // Initialize Command Line module cmdline_init(&cmd_context); // Check if robot name is populated in Flash memset(zhonxName, 0, sizeof(zhonxName)); // Retrieve ZHONX information from flash if any if (zhonx_info[0] == 'Z') { strcpy(zhonxName, zhonx_info); } while (zhonxName[0] == 0) { menu(zhonxNameMenu); } while (1) { menu(mainMenu); powerOffConfirmation(); } /* USER CODE END 2 */ /* Infinite loop */ /* USER CODE BEGIN WHILE */ while (1) ; /* USER CODE END WHILE */ /* USER CODE BEGIN 3 */ /* USER CODE END 3 */ }
int main(void) { uint8_t oldRelease = 0; /* USER CODE BEGIN 1 */ /* USER CODE END 1 */ /* Enable I-Cache-------------------------------------------------------------*/ SCB_EnableICache(); /* Enable D-Cache-------------------------------------------------------------*/ SCB_EnableDCache(); /* MCU Configuration----------------------------------------------------------*/ /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ HAL_Init(); /* Configure the system clock */ SystemClock_Config(); /* Initialize all configured peripherals */ MX_GPIO_Init(); MX_ADC1_Init(); MX_DMA_Init(); MX_CAN1_Init(); MX_CAN2_Init(); MX_DAC_Init(); MX_DMA2D_Init(); MX_FMC_Init(); MX_I2C2_Init(); MX_SDMMC1_SD_Init(); MX_SPI2_Init(); MX_TIM6_Init(); MX_TIM7_Init(); MX_USART2_UART_Init(); MX_USART3_UART_Init(); MX_USART6_UART_Init(); MX_FATFS_Init(); MX_USB_HOST_Init(); MX_TIM11_Init(); MX_TIM13_Init(); MX_TIM14_Init(); /* USER CODE BEGIN 2 */ //MPU_Config(); InitPeriph(); /* USER CODE END 2 */ /* Infinite loop */ /* USER CODE BEGIN WHILE */ while(1){ /* USER CODE END WHILE */ MX_USB_HOST_Process(); /* USER CODE BEGIN 3 */ RoutineFast(); // get and run deals from medium queue if(oldRelease && Touch_Data.status == TOUCH_RELEASED){ ReleaseFunction(); } else {oldRelease = 1;} if(UpdateScreen|| DISP.ReleaseFlag || TimeIsReady){ Run_GUI(); Show_GUI(); UpdateScreen = 0; DISP.ReleaseFlag = 0; } } /* USER CODE END 3 */ }