int main(void)
{
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
/* MCU Configuration----------------------------------------------------------*/
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
HAL_Init();
/* Configure the system clock */
SystemClock_Config();
/* Initialize all configured peripherals */
MX_GPIO_Init();
MX_DMA_Init();
MX_I2C3_Init();
MX_TIM1_Init();
MX_TIM2_Init();
MX_TIM3_Init();
MX_TIM4_Init();
MX_TIM5_Init();
MX_USART1_UART_Init();
MX_USART2_UART_Init();
MX_TIM11_Init();
/* USER CODE BEGIN 2 */
HAL_TIM_Base_Start_IT(&htim11); // 100 msec timer
initSonar( MAX_SONAR);
initSerOutput();
/* USER CODE END 2 */
/* Infinite loop */
/* USER CODE BEGIN WHILE */
while (1)
{
/* USER CODE END WHILE */
/* USER CODE BEGIN 3 */
// >>>>> Sonar reading
triggerSonar( COUPLE_0_2);
HAL_Delay(49);
triggerSonar( COUPLE_1_3);
HAL_Delay(49);
// <<<<< Sonar reading
// >>>>> Serial Output
convertMeasures();
sendMeasures();
// <<<<< Serial Output
}
/* USER CODE END 3 */
}
int main(void)
{
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
/* MCU Configuration----------------------------------------------------------*/
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
HAL_Init();
/* Configure the system clock */
SystemClock_Config();
/* Initialize all configured peripherals */
MX_GPIO_Init();
MX_DMA_Init();
MX_SPI1_Init();
MX_TIM2_Init();
MX_TIM3_Init();
MX_TIM7_Init();
MX_TIM10_Init();
MX_TIM11_Init();
MX_TIM13_Init();
MX_TIM14_Init();
MX_USART1_UART_Init();
MX_USART2_UART_Init();
/* USER CODE BEGIN 2 */
HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_1); //Motor1
HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_4); //Motor2
HAL_TIM_PWM_Start(&htim3, TIM_CHANNEL_1); //Motor3
HAL_TIM_PWM_Start(&htim3, TIM_CHANNEL_4); //Motor4
/* USER CODE END 2 */
/* Infinite loop */
/* USER CODE BEGIN WHILE */
while (1)
{
/* USER CODE END WHILE */
/* USER CODE BEGIN 3 */
}
/* USER CODE END 3 */
}
int main(void)
{
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
HAL_Init();
/* Configure the system clock */
SystemClock_Config();
/* Initialize all configured peripherals */
MX_GPIO_Init();
MX_DMA_Init();
MX_ADC1_Init();
MX_I2C1_Init();
MX_TIM10_Init();
MX_TIM11_Init();
MX_USART1_UART_Init();
xTaskCreate(task_safety, "Safety", 350, NULL, 1, NULL);
xTaskCreate(task_master, "Master", 350, NULL, 1, NULL);
xTaskCreate(task_control, "Control", 1000, NULL, 3, NULL);
xTaskCreate(task_test, "Test", 500, NULL, 4, NULL);
update_coefficients_QUEUE = xQueueCreate(3, sizeof(uint8_t));
control_sig_QUEUE = xQueueCreate(3, sizeof(int16_t));;
vSemaphoreCreateBinary(testing_SEMAPHORE);
vSemaphoreCreateBinary(data_SEMAPHORE);
osKernelStart();
/* We should never get here as control is now taken by the scheduler */
/* Infinite loop */
while (1)
{
}
}
int main(void)
{
/* USER CODE BEGIN 1 */
CMDLINE_CONTEXT cmd_context;
const char *zhonx_info = (char *)CONFIG_ZHONX_INFO_ADDR;
/* USER CODE END 1 */
/* MCU Configuration----------------------------------------------------------*/
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
HAL_Init();
/* Configure the system clock */
SystemClock_Config();
/* Initialize all configured peripherals */
MX_GPIO_Init();
MX_DMA_Init();
MX_ADC1_Init();
MX_ADC2_Init();
MX_ADC3_Init();
MX_I2C1_Init();
MX_RNG_Init();
MX_TIM1_Init();
MX_TIM2_Init();
MX_TIM3_Init();
MX_TIM4_Init();
MX_TIM5_Init();
MX_TIM6_Init();
MX_TIM7_Init();
MX_TIM8_Init();
MX_TIM11_Init();
MX_USART3_UART_Init();
/* USER CODE BEGIN 2 */
expanderInit();
HAL_Delay(100);
mainControlInit();
ssd1306Init(0);
timesBaseInit();
ledPowerBlink(990, 10);
settingsInit();
mulimeterInit();
bluetoothInit();
toneInit();
spyPostInit();
positionControlSetPositionType(GYRO);
mainControlSetFollowType(NO_FOLLOW);
toneSetVolulme(100);
tone(F4, 50);
toneItMode(A4, 50);
// Register Output callback
cmd_context.out = blockingPrintf;
// Initialize Command Line module
cmdline_init(&cmd_context);
// Check if robot name is populated in Flash
memset(zhonxName, 0, sizeof(zhonxName));
// Retrieve ZHONX information from flash if any
if (zhonx_info[0] == 'Z')
{
strcpy(zhonxName, zhonx_info);
}
while (zhonxName[0] == 0)
{
menu(zhonxNameMenu);
}
while (1)
{
menu(mainMenu);
powerOffConfirmation();
}
/* USER CODE END 2 */
/* Infinite loop */
/* USER CODE BEGIN WHILE */
while (1)
;
/* USER CODE END WHILE */
/* USER CODE BEGIN 3 */
/* USER CODE END 3 */
}
int main(void)
{
uint8_t oldRelease = 0;
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
/* Enable I-Cache-------------------------------------------------------------*/
SCB_EnableICache();
/* Enable D-Cache-------------------------------------------------------------*/
SCB_EnableDCache();
/* MCU Configuration----------------------------------------------------------*/
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
HAL_Init();
/* Configure the system clock */
SystemClock_Config();
/* Initialize all configured peripherals */
MX_GPIO_Init();
MX_ADC1_Init();
MX_DMA_Init();
MX_CAN1_Init();
MX_CAN2_Init();
MX_DAC_Init();
MX_DMA2D_Init();
MX_FMC_Init();
MX_I2C2_Init();
MX_SDMMC1_SD_Init();
MX_SPI2_Init();
MX_TIM6_Init();
MX_TIM7_Init();
MX_USART2_UART_Init();
MX_USART3_UART_Init();
MX_USART6_UART_Init();
MX_FATFS_Init();
MX_USB_HOST_Init();
MX_TIM11_Init();
MX_TIM13_Init();
MX_TIM14_Init();
/* USER CODE BEGIN 2 */
//MPU_Config();
InitPeriph();
/* USER CODE END 2 */
/* Infinite loop */
/* USER CODE BEGIN WHILE */
while(1){
/* USER CODE END WHILE */
MX_USB_HOST_Process();
/* USER CODE BEGIN 3 */
RoutineFast(); // get and run deals from medium queue
if(oldRelease && Touch_Data.status == TOUCH_RELEASED){
ReleaseFunction();
}
else
{oldRelease = 1;}
if(UpdateScreen|| DISP.ReleaseFlag || TimeIsReady){
Run_GUI();
Show_GUI();
UpdateScreen = 0;
DISP.ReleaseFlag = 0;
}
}
/* USER CODE END 3 */
}
