void AstModifiers::Unparse(Ostream& os, LexStream* lex_stream)
{
if (debug_unparse)
os << "/*AstModifiers:#" << id << "*/";
for (unsigned i = 0; i < NumModifiers(); i++)
{
Modifier(i) -> Unparse(os, lex_stream);
if (Modifier(i) -> ModifierKeywordCast())
os << ' ';
}
if (debug_unparse)
os << "/*:AstModifiers#" << id << "*/";
}
bool
TargetNVC0::isModSupported(const Instruction *insn, int s, Modifier mod) const
{
if (!isFloatType(insn->dType)) {
switch (insn->op) {
case OP_ABS:
case OP_NEG:
case OP_CVT:
case OP_CEIL:
case OP_FLOOR:
case OP_TRUNC:
case OP_AND:
case OP_OR:
case OP_XOR:
break;
case OP_ADD:
if (mod.abs())
return false;
if (insn->src(s ? 0 : 1).mod.neg())
return false;
break;
case OP_SUB:
if (s == 0)
return insn->src(1).mod.neg() ? false : true;
break;
default:
return false;
}
}
if (s > 3)
return false;
return (mod & Modifier(opInfo[insn->op].srcMods[s])) == mod;
}
Modifier Modifier::operator*(const Modifier m) const
{
unsigned int a, b, c;
b = m.bits;
if (this->bits & NV50_IR_MOD_ABS)
b &= ~NV50_IR_MOD_NEG;
a = (this->bits ^ b) & (NV50_IR_MOD_NOT | NV50_IR_MOD_NEG);
c = (this->bits | m.bits) & (NV50_IR_MOD_ABS | NV50_IR_MOD_SAT);
return Modifier(a | c);
}
void UGAAttributeComponent::ApplyEffectForDuration(FGAGameEffectHandle& HandleIn)
{
FGAGameEffect& Effect = HandleIn.GetEffectRef();
TArray<FGAEffectMod> Mods = Effect.GetOnAppliedMods();
for (FGAEffectMod& mod : Mods)
{
FGAAttributeBase* attr = DefaultAttributes->GetAttribute(mod.Attribute);
if (attr)
{
FGAModifier Modifier(mod.AttributeMod, mod.Value);
float val = attr->GetFinalValue();
UE_LOG(GameAttributes, Log, TEXT("Value Before bonus of attribute = %f"), val);
attr->AddBonus(Modifier, HandleIn, EGAEffectStacking::Override);
val = attr->GetFinalValue();
UE_LOG(GameAttributes, Log, TEXT("Value After bonus of attribute = %f"), val);
}
}
}
void modify(size_type n, value_type value) { Modifier()(vector[n], value); }
Modifier CuckooTable::modifier() {
return Modifier(*this);
}
static void doUnroll(MemoryManager& mm, IRManager& irm, const LoopUnrollInfo* info, const UnrollFlags& flags) {
//unroll algorithm does the following
//before:
// loopOrig {
// bodyA
// check(idxOpnd,limitOpnd)
// bodyB
// }
//after:
// unrolledIncOpnd = unrollCount * idx->increment
// unrolledLimitOpnd = limitOpnd-unrolledIncOpnd;
// bodyA
// loopUnrolled {
// check(idxOpnd,unrolledLimitOpnd)
// bodyB
// bodyA
// bodyB
// ...
// bodyA
// }
// loopEpilogue {
// check(idxOpnd,limitOpnd)
// bodyB
// bodyA
// }
//
//where:
// bodyA - all nodes of the same loop accessible from checkNode via incoming edges
// bodyB - all nodes except bodyA and checkNode
ControlFlowGraph& cfg = irm.getFlowGraph();
LoopTree* lt = cfg.getLoopTree();
InstFactory& instFactory = irm.getInstFactory();
OpndManager& opndManager = irm.getOpndManager();
Type* opType = info->getLimitOpnd()->getType();
// printf("UNROLL\n");
//STEP 0: cache all data needed
assert(info->unrollCount >= 1);
Node* origHeader = info->header;
assert(origHeader->getInDegree() == 2); //loop is normalized
OptPass::computeLoops(irm);//recompute loop info if needed
LoopNode* loopNode = lt->getLoopNode(origHeader, false);
Edge* entryEdge = origHeader->getInEdges().front();
if (lt->isBackEdge(entryEdge)) {
entryEdge = origHeader->getInEdges().back();
}
Node* origCheckNode = info->branchInst->getNode();
Edge* origLoopExitEdge = info->branchTargetIsExit ? origCheckNode->getTrueEdge() : origCheckNode->getFalseEdge();
U_32 maxNodeId = cfg.getMaxNodeId()+1; //+1 for a split check node
StlBitVector nodesInLoop(mm, maxNodeId);
{
const Nodes& loopNodes = loopNode->getNodesInLoop();
for (Nodes::const_iterator it = loopNodes.begin(), end = loopNodes.end(); it!=end; ++it) {
Node* node = *it;
nodesInLoop.setBit(node->getId());
}
}
//STEP 1: calculate bodyA nodes
BitSet aFlags(mm, maxNodeId);
calculateReachableNodesInLoop(loopNode, origHeader, origCheckNode, aFlags);
StlBitVector bodyANodes(mm, maxNodeId);
for (U_32 i=0;i<maxNodeId;i++) bodyANodes.setBit(i, aFlags.getBit(i));
//STEP 2: make checkNode a separate node, prepare loop region
bodyANodes.setBit(origCheckNode->getId(), true);
Node* checkNode = cfg.splitNodeAtInstruction(info->branchInst->prev(), true, false, instFactory.makeLabel());
nodesInLoop.setBit(checkNode->getId(), true);
Node* preCheckNode = origCheckNode;
bodyANodes.setBit(preCheckNode->getId(), true);
//STEP 3: rotate original loop
// before: {bodyA1, check , bodyB}
// after: bodyA2 {check, bodyB, bodyA1}
Edge* bodyA2ToCheckEdge = NULL;
Opnd* limitOpndInBodyA2 = NULL;
{
//WARN: info->limitOpnd and info->indexOpnd can be replaced after code duplication if promoted to vars
Opnd* limitOpndBefore = info->getLimitOpnd();
assert(preCheckNode->getOutDegree()==1 && preCheckNode->getUnconditionalEdgeTarget() == checkNode);
DefUseBuilder defUses(mm);
defUses.initialize(cfg);
OpndRenameTable opndRenameTable(mm, maxNodeId); //todo: maxNodeId is overkill estimate here
NodeRenameTable nodeRenameTable(mm, maxNodeId);
Node* bodyA2 = FlowGraph::duplicateRegion(irm, origHeader, bodyANodes, defUses, nodeRenameTable, opndRenameTable);
cfg.replaceEdgeTarget(entryEdge, bodyA2, true);
// while duplicating a region new nodes could be created and 'nodesInRegion' bitvector param is updated.
// BodyA is part of the loop -> if new nodes were created in the loop we must track them.
nodesInLoop.resize(bodyANodes.size());
for (U_32 i=0;i<bodyANodes.size();i++) nodesInLoop.setBit(i, bodyANodes.getBit(i) || nodesInLoop.getBit(i));
Node* bodyA2PreCheckNode = nodeRenameTable.getMapping(preCheckNode);
assert(bodyA2PreCheckNode->getOutDegree()==1 && bodyA2PreCheckNode->getUnconditionalEdgeTarget() == checkNode);
bodyA2ToCheckEdge = bodyA2PreCheckNode->getUnconditionalEdge();
limitOpndInBodyA2 = limitOpndBefore;
if (nodeRenameTable.getMapping(limitOpndBefore->getInst()->getNode())!=NULL) {
limitOpndInBodyA2 = opndRenameTable.getMapping(limitOpndBefore);
}
assert(limitOpndInBodyA2!=NULL);
}
//STEP 4: prepare epilogue loop: {check, bodyB, bodyA}
Node* epilogueLoopHead = NULL;
{
DefUseBuilder defUses(mm);
defUses.initialize(cfg);
OpndRenameTable opndRenameTable(mm, maxNodeId); //todo: maxNodeId is overkill estimate here
NodeRenameTable nodeRenameTable(mm, maxNodeId);
epilogueLoopHead = FlowGraph::duplicateRegion(irm, checkNode, nodesInLoop, defUses, nodeRenameTable, opndRenameTable);
cfg.replaceEdgeTarget(origLoopExitEdge, epilogueLoopHead, true);
}
//STEP 5: prepare unrolledLimitOpnd and replace it in original loop's check
{
Node* unrolledPreheader = cfg.spliceBlockOnEdge(bodyA2ToCheckEdge, instFactory.makeLabel());
Opnd* unrolledIncOpnd = opndManager.createSsaTmpOpnd(opType);
unrolledPreheader->appendInst(instFactory.makeLdConst(unrolledIncOpnd, info->increment * info->unrollCount));
Opnd* unrolledLimitOpnd = opndManager.createSsaTmpOpnd(opType);
Modifier mod = Modifier(SignedOp)|Modifier(Strict_No)|Modifier(Overflow_None)|Modifier(Exception_Never);
unrolledPreheader->appendInst(instFactory.makeSub(mod, unrolledLimitOpnd, limitOpndInBodyA2, unrolledIncOpnd));
info->branchInst->setSrc(info->branchLimitOpndPos, unrolledLimitOpnd);
}
DefUseBuilder defUses(mm);
defUses.initialize(cfg);
//STEP 6: unroll original loop and remove all checks in duplicated bodies
{
Edge* backedge = preCheckNode->getUnconditionalEdge();
for (int i=1;i<info->unrollCount;i++) {
OpndRenameTable opndRenameTable(mm, maxNodeId);
NodeRenameTable nodeRenameTable(mm, maxNodeId);
Node* unrolledRegionHeader = FlowGraph::duplicateRegion(irm, checkNode, nodesInLoop, defUses, nodeRenameTable, opndRenameTable);
cfg.replaceEdgeTarget(backedge, unrolledRegionHeader, true);
Node* newTail = nodeRenameTable.getMapping(preCheckNode);
assert(newTail->getOutDegree()==1 );
backedge = newTail->getUnconditionalEdge();
cfg.replaceEdgeTarget(backedge, checkNode, true);
//remove check from duplicated code
Node* duplicateCheckNode = nodeRenameTable.getMapping(checkNode);
assert(duplicateCheckNode->getOutDegree()==2);
Edge* exitEdge = info->branchTargetIsExit ? duplicateCheckNode->getTrueEdge() : duplicateCheckNode->getFalseEdge();
duplicateCheckNode->getLastInst()->unlink();
cfg.removeEdge(exitEdge);
}
}
//STEP 7: make old loop colder
if (cfg.hasEdgeProfile()) {
Edge* epilogueExit = info->branchTargetIsExit ? epilogueLoopHead->getTrueEdge() : epilogueLoopHead->getFalseEdge();
epilogueExit->setEdgeProb(epilogueExit->getEdgeProb() * 5);
}
}
