/*********************************************************************
* @fn zclElectricalMeasurement_HdlIncoming
*
* @brief Callback from ZCL to process incoming Commands specific
* to this cluster library or Profile commands for attributes
* that aren't in the attribute list
*
* @param pInMsg - pointer to the incoming message
*
* @return ZStatus_t
*/
static ZStatus_t zclElectricalMeasurement_HdlIncoming( zclIncoming_t *pInMsg )
{
ZStatus_t stat = ZSuccess;
#if defined ( INTER_PAN )
if ( StubAPS_InterPan( pInMsg->msg->srcAddr.panId, pInMsg->msg->srcAddr.endPoint ) )
{
return ( stat ); // Cluster not supported thru Inter-PAN
}
#endif
if ( zcl_ClusterCmd( pInMsg->hdr.fc.type ) )
{
// Is this a manufacturer specific command?
if ( pInMsg->hdr.fc.manuSpecific == 0 )
{
stat = zclElectricalMeasurement_HdlInSpecificCommands( pInMsg );
}
else
{
// We don't support any manufacturer specific command.
stat = ZFailure;
}
}
else
{
// Handle all the normal (Read, Write...) commands -- should never get here
stat = ZFailure;
}
return ( stat );
}
/***************************************************************************************************
* @fn MT_AfInterPanCtl
*
* @brief Process the AF Inter Pan control command.
*
* @param pBuf - pointer to the received buffer
*
* @return none
***************************************************************************************************/
static void MT_AfInterPanCtl(uint8 *pBuf)
{
uint8 cmd, rtrn;
uint16 panId;
endPointDesc_t *pEP;
cmd = pBuf[MT_RPC_POS_CMD1];
pBuf += MT_RPC_FRAME_HDR_SZ;
switch (*pBuf++) // Inter-pan request parameter.
{
case InterPanClr:
rtrn = StubAPS_SetIntraPanChannel(); // Switch channel back to the NIB channel.
break;
case InterPanSet:
rtrn = StubAPS_SetInterPanChannel(*pBuf); // Set channel for inter-pan communication.
break;
case InterPanReg:
if ((pEP = afFindEndPointDesc(*pBuf)))
{
StubAPS_RegisterApp(pEP);
rtrn = SUCCESS;
}
else
{
rtrn = FAILURE;
}
break;
case InterPanChk:
panId = BUILD_UINT16(pBuf[0], pBuf[1]);
rtrn = (StubAPS_InterPan(panId, pBuf[2])) ? ZSuccess : ZFailure;
break;
default:
rtrn = afStatus_INVALID_PARAMETER;
break;
}
MT_BuildAndSendZToolResponse(((uint8)MT_RPC_CMD_SRSP | (uint8)MT_RPC_SYS_AF), cmd, 1, &rtrn);
}
afStatus_t AF_DataRequest( afAddrType_t *dstAddr, endPointDesc_t *srcEP,
uint16 cID, uint16 len, uint8 *buf, uint8 *transID,
uint8 options, uint8 radius )
{
pDescCB pfnDescCB;
ZStatus_t stat;
APSDE_DataReq_t req;
afDataReqMTU_t mtu;
// Verify source end point
if ( srcEP == NULL )
{
return afStatus_INVALID_PARAMETER;
}
#if !defined( REFLECTOR )
if ( dstAddr->addrMode == afAddrNotPresent )
{
return afStatus_INVALID_PARAMETER;
}
#endif
// Validate broadcasting
if ( ( dstAddr->addrMode == afAddr16Bit ) ||
( dstAddr->addrMode == afAddrBroadcast ) )
{
// Check for valid broadcast values
if( ADDR_NOT_BCAST != NLME_IsAddressBroadcast( dstAddr->addr.shortAddr ) )
{
// Force mode to broadcast
dstAddr->addrMode = afAddrBroadcast;
}
else
{
// Address is not a valid broadcast type
if ( dstAddr->addrMode == afAddrBroadcast )
{
return afStatus_INVALID_PARAMETER;
}
}
}
else if ( dstAddr->addrMode != afAddr64Bit &&
dstAddr->addrMode != afAddrGroup &&
dstAddr->addrMode != afAddrNotPresent )
{
return afStatus_INVALID_PARAMETER;
}
// Set destination address
req.dstAddr.addrMode = dstAddr->addrMode;
if ( dstAddr->addrMode == afAddr64Bit )
osal_cpyExtAddr( req.dstAddr.addr.extAddr, dstAddr->addr.extAddr );
else
req.dstAddr.addr.shortAddr = dstAddr->addr.shortAddr;
req.profileID = ZDO_PROFILE_ID;
if ( (pfnDescCB = afGetDescCB( srcEP )) )
{
uint16 *pID = (uint16 *)(pfnDescCB(
AF_DESCRIPTOR_PROFILE_ID, srcEP->endPoint ));
if ( pID )
{
req.profileID = *pID;
osal_mem_free( pID );
}
}
else if ( srcEP->simpleDesc )
{
req.profileID = srcEP->simpleDesc->AppProfId;
}
req.txOptions = 0;
if ( ( options & AF_ACK_REQUEST ) &&
( req.dstAddr.addrMode != AddrBroadcast ) &&
( req.dstAddr.addrMode != AddrGroup ) )
{
req.txOptions |= APS_TX_OPTIONS_ACK;
}
if ( options & AF_SKIP_ROUTING )
{
req.txOptions |= APS_TX_OPTIONS_SKIP_ROUTING;
}
if ( options & AF_EN_SECURITY )
{
req.txOptions |= APS_TX_OPTIONS_SECURITY_ENABLE;
mtu.aps.secure = TRUE;
}
else
{
mtu.aps.secure = FALSE;
}
mtu.kvp = FALSE;
req.transID = *transID;
req.srcEP = srcEP->endPoint;
req.dstEP = dstAddr->endPoint;
req.clusterID = cID;
req.asduLen = len;
req.asdu = buf;
req.discoverRoute = AF_DataRequestDiscoverRoute;//(uint8)((options & AF_DISCV_ROUTE) ? 1 : 0);
req.radiusCounter = radius;
#if defined ( INTER_PAN )
req.dstPanId = dstAddr->panId;
if ( StubAPS_InterPan( dstAddr->panId, dstAddr->endPoint ) )
{
if ( len > INTERP_DataReqMTU() )
{
stat = afStatus_INVALID_PARAMETER;
}
else
{
stat = INTERP_DataReq( &req );
}
}
else
#endif // INTER_PAN
{
if (len > afDataReqMTU( &mtu ) )
{
if (apsfSendFragmented)
{
stat = (*apsfSendFragmented)( &req );
}
else
{
stat = afStatus_INVALID_PARAMETER;
}
}
else
{
stat = APSDE_DataReq( &req );
}
}
/*
* If this is an EndPoint-to-EndPoint message on the same device, it will not
* get added to the NWK databufs. So it will not go OTA and it will not get
* a MACCB_DATA_CONFIRM_CMD callback. Thus it is necessary to generate the
* AF_DATA_CONFIRM_CMD here. Note that APSDE_DataConfirm() only generates one
* message with the first in line TransSeqNumber, even on a multi message.
* Also note that a reflected msg will not have its confirmation generated
* here.
*/
if ( (req.dstAddr.addrMode == Addr16Bit) &&
(req.dstAddr.addr.shortAddr == NLME_GetShortAddr()) )
{
afDataConfirm( srcEP->endPoint, *transID, stat );
}
if ( stat == afStatus_SUCCESS )
{
(*transID)++;
}
return (afStatus_t)stat;
}
/***************************************************************************************************
* @fn MT_AfIncomingMsg
*
* @brief Process the callback subscription for AF Incoming data.
*
* @param pkt - Incoming AF data.
*
* @return none
***************************************************************************************************/
void MT_AfIncomingMsg(afIncomingMSGPacket_t *pMsg)
{
#define MT_AF_INC_MSG_LEN 17
#define MT_AF_INC_MSG_EXT 10
uint16 dataLen = pMsg->cmd.DataLength; // Length of the data section in the response packet.
uint16 respLen = MT_AF_INC_MSG_LEN + dataLen;
uint8 cmd = MT_AF_INCOMING_MSG;
uint8 *pRsp, *pTmp;
mtAfInMsgList_t *pItem = NULL;
#if defined INTER_PAN
if (StubAPS_InterPan(pMsg->srcAddr.panId, pMsg->srcAddr.endPoint))
{
cmd = MT_AF_INCOMING_MSG_EXT;
}
else
#endif
if ((pMsg->srcAddr.addrMode == afAddr64Bit) ||
(respLen > (uint16)(MT_RPC_DATA_MAX - MT_AF_INC_MSG_EXT)))
{
cmd = MT_AF_INCOMING_MSG_EXT;
}
if (cmd == MT_AF_INCOMING_MSG_EXT)
{
respLen += MT_AF_INC_MSG_EXT;
}
if (respLen > (uint16)MT_RPC_DATA_MAX)
{
if ((pItem = (mtAfInMsgList_t *)osal_mem_alloc(sizeof(mtAfInMsgList_t) + dataLen)) == NULL)
{
return; // If cannot hold a huge message, cannot give indication at all.
}
pItem->data = (uint8 *)(pItem+1);
respLen -= dataLen; // Zero data bytes are sent with an over-sized incoming indication.
}
// Attempt to allocate memory for the response packet.
if ((pRsp = osal_mem_alloc(respLen)) == NULL)
{
if (pItem != NULL)
{
(void)osal_mem_free(pItem);
}
return;
}
pTmp = pRsp;
/* Group ID */
*pTmp++ = LO_UINT16(pMsg->groupId);
*pTmp++ = HI_UINT16(pMsg->groupId);
/* Cluster ID */
*pTmp++ = LO_UINT16(pMsg->clusterId);
*pTmp++ = HI_UINT16(pMsg->clusterId);
if (cmd == MT_AF_INCOMING_MSG_EXT)
{
*pTmp++ = pMsg->srcAddr.addrMode;
if (pMsg->srcAddr.addrMode == afAddr64Bit)
{
(void)osal_memcpy(pTmp, pMsg->srcAddr.addr.extAddr, Z_EXTADDR_LEN);
}
else
{
pTmp[0] = LO_UINT16(pMsg->srcAddr.addr.shortAddr);
pTmp[1] = HI_UINT16(pMsg->srcAddr.addr.shortAddr);
}
pTmp += Z_EXTADDR_LEN;
*pTmp++ = pMsg->srcAddr.endPoint;
#if defined INTER_PAN
*pTmp++ = LO_UINT16(pMsg->srcAddr.panId);
*pTmp++ = HI_UINT16(pMsg->srcAddr.panId);
#else
*pTmp++ = 0;
*pTmp++ = 0;
#endif
}
else
{
/* Source Address */
*pTmp++ = LO_UINT16(pMsg->srcAddr.addr.shortAddr);
*pTmp++ = HI_UINT16(pMsg->srcAddr.addr.shortAddr);
/* Source EP */
*pTmp++ = pMsg->srcAddr.endPoint;
}
/* Destination EP */
*pTmp++ = pMsg->endPoint;
/* WasBroadCast */
*pTmp++ = pMsg->wasBroadcast;
/* LinkQuality */
*pTmp++ = pMsg->LinkQuality;
/* SecurityUse */
*pTmp++ = pMsg->SecurityUse;
/* Timestamp */
*pTmp++ = BREAK_UINT32(pMsg->timestamp, 0);
*pTmp++ = BREAK_UINT32(pMsg->timestamp, 1);
*pTmp++ = BREAK_UINT32(pMsg->timestamp, 2);
*pTmp++ = BREAK_UINT32(pMsg->timestamp, 3);
/* Data Length */
if (cmd == MT_AF_INCOMING_MSG_EXT)
{
/* Z-Tool apparently takes the last Byte before the data buffer as the dynamic length and
* ignores the bigger UInt16 length of an EXT incoming message. But no data bytes will be sent
* with a huge message, so it's necessary to work-around and fake-out Z-Tool with a zero here.
*/
*pTmp++ = 0; // TODO - workaround Z-Tool shortcoming; should be: = pMsg->cmd.TransSeqNumber;
*pTmp++ = LO_UINT16(dataLen);
*pTmp++ = HI_UINT16(dataLen);
}
else
{
*pTmp++ = pMsg->cmd.TransSeqNumber;
*pTmp++ = dataLen;
}
/* Data */
if (pItem != NULL)
{
// Enqueue the new huge incoming item.
pItem->next = pMtAfInMsgList;
pMtAfInMsgList = pItem;
// Setup to time-out the huge incoming item if host does not MT_AF_DATA_RETRIEVE it.
pItem->tick = MT_AF_EXEC_CNT;
if (ZSuccess != osal_start_timerEx(MT_TaskID, MT_AF_EXEC_EVT, MT_AF_EXEC_DLY))
{
(void)osal_set_event(MT_TaskID, MT_AF_EXEC_EVT);
}
pItem->timestamp = pMsg->timestamp;
(void)osal_memcpy(pItem->data, pMsg->cmd.Data, dataLen);
}
else
{
(void)osal_memcpy(pTmp, pMsg->cmd.Data, dataLen);
}
/* Build and send back the response */
MT_BuildAndSendZToolResponse(((uint8)MT_RPC_CMD_AREQ|(uint8)MT_RPC_SYS_AF), cmd, respLen, pRsp);
(void)osal_mem_free(pRsp);
}
/******************************************************************************
* @fn INTERP_DataReq
*
* @brief This function requests the transfer of data from the next
* higher layer to a single peer entity.
*
* @param req - APSDE_DataReq_t
*
* @return ZStatus_t
*/
ZStatus_t INTERP_DataReq( APSDE_DataReq_t *req )
{
uint8 apsFrmCtrl;
uint16 groupID = 0;
uint8 *buf;
uint8 hdrLen;
ZMacDataReq_t dataReq;
ZStatus_t status;
if ( channelChangeInProgress || !StubAPS_InterPan( req->dstPanId, req->dstEP ) )
return ( ZFailure );
osal_memset( &dataReq, 0, sizeof( ZMacDataReq_t ) );
// Build Stub APS header
status = StubAPS_BuildFrameControl( &apsFrmCtrl, &(dataReq.DstAddr), &groupID, req );
if ( status != ZSuccess )
return ( status );
// set default Stub APS header length
hdrLen = APS_FRAME_CTRL_FIELD_LEN;
// add group ID length
if ( ( apsFrmCtrl & APS_DELIVERYMODE_MASK ) == APS_FC_DM_GROUP )
hdrLen += APS_GROUP_ID_FIELD_LEN;
// add cluster ID length
hdrLen += APS_CLUSTERID_FIELD_LEN;
// add profile ID length
hdrLen += APS_PROFILEID_FIELD_LEN;
// add default Stub NWK header length
hdrLen += STUB_NWK_HDR_LEN;
// calculate MSDU length
dataReq.msduLength = hdrLen + req->asduLen;
// allocate buffer
buf = osal_mem_alloc( dataReq.msduLength );
if ( buf != NULL )
{
dataReq.msdu = buf;
// Add Stub APS header and data
StubAPS_BuildMsg( &buf[STUB_APS_HDR_FRAME_CTRL], apsFrmCtrl, groupID, req );
// Add Stub NWK header
StubNWK_BuildMsg( buf );
// Set ZMac data request
dataReq.DstPANId = req->dstPanId;
dataReq.SrcAddrMode = Addr64Bit;
dataReq.Handle = req->transID;
if ( ( apsFrmCtrl & APS_DELIVERYMODE_MASK ) == APS_FC_DM_UNICAST )
dataReq.TxOptions = NWK_TXOPTIONS_ACK;
else
dataReq.TxOptions = 0;
// send the frame
status = ZMacDataReq( &dataReq );
// free the frame
osal_mem_free( buf );
}
else
{
// flag a memory error
status = ZMemError;
}
return ( status );
} /* INTERP_DataReq */
/***************************************************************************************************
* @fn MT_AfIncomingMsg
*
* @brief Process the callback subscription for AF Incoming data.
*
* @param pkt - Incoming AF data.
*
* @return none
***************************************************************************************************/
void MT_AfIncomingMsg(afIncomingMSGPacket_t *pMsg)
{
uint8 dataLen = pMsg->cmd.DataLength; /* Length of the data section in the response packet */
uint8 respLen = 17 + dataLen; /* Length of the whole response packet */
uint8 cmd = MT_AF_INCOMING_MSG;
uint8 *pRsp, *tempPtr;
#if defined INTER_PAN
if (StubAPS_InterPan(pMsg->srcAddr.panId, pMsg->srcAddr.endPoint))
{
cmd = MT_AF_INCOMING_MSG_EXT;
}
else
#endif
if (pMsg->srcAddr.addrMode == afAddr64Bit)
{
cmd = MT_AF_INCOMING_MSG_EXT;
}
if (cmd == MT_AF_INCOMING_MSG_EXT)
{
respLen += 9;
}
// Attempt to allocate memory for the response packet.
if ((pRsp = osal_mem_alloc(respLen)) == NULL)
{
return;
}
tempPtr = pRsp;
/* Fill in the data */
/* Group ID */
*tempPtr++ = LO_UINT16(pMsg->groupId);
*tempPtr++ = HI_UINT16(pMsg->groupId);
/* Cluster ID */
*tempPtr++ = LO_UINT16(pMsg->clusterId);
*tempPtr++ = HI_UINT16(pMsg->clusterId);
if (cmd == MT_AF_INCOMING_MSG_EXT)
{
*tempPtr++ = pMsg->srcAddr.addrMode;
if (pMsg->srcAddr.addrMode == afAddr64Bit)
{
(void)osal_memcpy(tempPtr, pMsg->srcAddr.addr.extAddr, Z_EXTADDR_LEN);
}
else
{
tempPtr[0] = LO_UINT16(pMsg->srcAddr.addr.shortAddr);
tempPtr[1] = HI_UINT16(pMsg->srcAddr.addr.shortAddr);
}
tempPtr += Z_EXTADDR_LEN;
*tempPtr++ = pMsg->srcAddr.endPoint;
#if defined INTER_PAN
*tempPtr++ = LO_UINT16(pMsg->srcAddr.panId);
*tempPtr++ = HI_UINT16(pMsg->srcAddr.panId);
#else
*tempPtr++ = 0;
*tempPtr++ = 0;
#endif
}
else
{
/* Source Address */
*tempPtr++ = LO_UINT16(pMsg->srcAddr.addr.shortAddr);
*tempPtr++ = HI_UINT16(pMsg->srcAddr.addr.shortAddr);
/* Source EP */
*tempPtr++ = pMsg->srcAddr.endPoint;
}
/* Destination EP */
*tempPtr++ = pMsg->endPoint;
/* WasBroadCast */
*tempPtr++ = pMsg->wasBroadcast;
/* LinkQuality */
*tempPtr++ = pMsg->LinkQuality;
/* SecurityUse */
*tempPtr++ = pMsg->SecurityUse;
/* Timestamp */
*tempPtr++ = BREAK_UINT32(pMsg->timestamp, 0);
*tempPtr++ = BREAK_UINT32(pMsg->timestamp, 1);
*tempPtr++ = BREAK_UINT32(pMsg->timestamp, 2);
*tempPtr++ = BREAK_UINT32(pMsg->timestamp, 3);
/* Transmit Sequence Number */
*tempPtr++ = pMsg->cmd.TransSeqNumber;
/* Data Length */
*tempPtr++ = dataLen;
/* Data */
if (dataLen)
{
osal_memcpy(tempPtr, pMsg->cmd.Data, dataLen);
}
/* Build and send back the response */
MT_BuildAndSendZToolResponse(((uint8)MT_RPC_CMD_AREQ|(uint8)MT_RPC_SYS_AF), cmd, respLen, pRsp);
/* Free memory */
osal_mem_free(pRsp);
}
afStatus_t AF_DataRequest( afAddrType_t *dstAddr, endPointDesc_t *srcEP,
uint16 cID, uint16 len, uint8 *buf, uint8 *transID,
uint8 options, uint8 radius )
{
pDescCB pfnDescCB;
ZStatus_t stat;
APSDE_DataReq_t req;
afDataReqMTU_t mtu;
epList_t *pList;
// Verify source end point
if ( srcEP == NULL )
{
return afStatus_INVALID_PARAMETER;
}
#if !defined( REFLECTOR )
if ( dstAddr->addrMode == afAddrNotPresent )
{
return afStatus_INVALID_PARAMETER;
}
#endif
// Check if route is available before sending data
if ( options & AF_LIMIT_CONCENTRATOR )
{
if ( dstAddr->addrMode != afAddr16Bit )
{
return ( afStatus_INVALID_PARAMETER );
}
// First, make sure the destination is not its self, then check for an existing route.
if ( (dstAddr->addr.shortAddr != NLME_GetShortAddr())
&& (RTG_CheckRtStatus( dstAddr->addr.shortAddr, RT_ACTIVE, (MTO_ROUTE | NO_ROUTE_CACHE) ) != RTG_SUCCESS) )
{
// A valid route to a concentrator wasn't found
return ( afStatus_NO_ROUTE );
}
}
// Validate broadcasting
if ( ( dstAddr->addrMode == afAddr16Bit ) ||
( dstAddr->addrMode == afAddrBroadcast ) )
{
// Check for valid broadcast values
if( ADDR_NOT_BCAST != NLME_IsAddressBroadcast( dstAddr->addr.shortAddr ) )
{
// Force mode to broadcast
dstAddr->addrMode = afAddrBroadcast;
}
else
{
// Address is not a valid broadcast type
if ( dstAddr->addrMode == afAddrBroadcast )
{
return afStatus_INVALID_PARAMETER;
}
}
}
else if ( dstAddr->addrMode != afAddr64Bit &&
dstAddr->addrMode != afAddrGroup &&
dstAddr->addrMode != afAddrNotPresent )
{
return afStatus_INVALID_PARAMETER;
}
// Set destination address
req.dstAddr.addrMode = dstAddr->addrMode;
if ( dstAddr->addrMode == afAddr64Bit )
{
osal_cpyExtAddr( req.dstAddr.addr.extAddr, dstAddr->addr.extAddr );
}
else
{
req.dstAddr.addr.shortAddr = dstAddr->addr.shortAddr;
}
// This option is to use Wildcard ProfileID in outgoing packets
if ( options & AF_WILDCARD_PROFILEID )
{
req.profileID = ZDO_WILDCARD_PROFILE_ID;
}
else
{
req.profileID = ZDO_PROFILE_ID;
if ( (pfnDescCB = afGetDescCB( srcEP )) )
{
uint16 *pID = (uint16 *)(pfnDescCB(
AF_DESCRIPTOR_PROFILE_ID, srcEP->endPoint ));
if ( pID )
{
req.profileID = *pID;
osal_mem_free( pID );
}
}
else if ( srcEP->simpleDesc )
{
req.profileID = srcEP->simpleDesc->AppProfId;
}
}
req.txOptions = 0;
if ( ( options & AF_ACK_REQUEST ) &&
( req.dstAddr.addrMode != AddrBroadcast ) &&
( req.dstAddr.addrMode != AddrGroup ) )
{
req.txOptions |= APS_TX_OPTIONS_ACK;
}
if ( options & AF_SKIP_ROUTING )
{
req.txOptions |= APS_TX_OPTIONS_SKIP_ROUTING;
}
if ( options & AF_EN_SECURITY )
{
req.txOptions |= APS_TX_OPTIONS_SECURITY_ENABLE;
mtu.aps.secure = TRUE;
}
else
{
mtu.aps.secure = FALSE;
}
if ( options & AF_PREPROCESS )
{
req.txOptions |= APS_TX_OPTIONS_PREPROCESS;
}
mtu.kvp = FALSE;
if ( options & AF_SUPRESS_ROUTE_DISC_NETWORK )
{
req.discoverRoute = DISC_ROUTE_INITIATE;
}
else
{
req.discoverRoute = AF_DataRequestDiscoverRoute;
}
req.transID = *transID;
req.srcEP = srcEP->endPoint;
req.dstEP = dstAddr->endPoint;
req.clusterID = cID;
req.asduLen = len;
req.asdu = buf;
req.radiusCounter = radius;
#if defined ( INTER_PAN )
req.dstPanId = dstAddr->panId;
#endif // INTER_PAN
// Look if there is a Callback function registered for this endpoint
// The callback is used to control the AF Transaction ID used when sending messages
pList = afFindEndPointDescList( srcEP->endPoint );
if ( ( pList != NULL ) && ( pList->pfnApplCB != NULL ) )
{
pList->pfnApplCB( &req );
}
#if defined ( INTER_PAN )
if ( StubAPS_InterPan( dstAddr->panId, dstAddr->endPoint ) )
{
if ( len > INTERP_DataReqMTU() )
{
stat = afStatus_INVALID_PARAMETER;
}
else
{
stat = INTERP_DataReq( &req );
}
}
else
#endif // INTER_PAN
{
if (len > afDataReqMTU( &mtu ) )
{
if (apsfSendFragmented)
{
stat = (*apsfSendFragmented)( &req );
}
else
{
stat = afStatus_INVALID_PARAMETER;
}
}
else
{
stat = APSDE_DataReq( &req );
}
}
/*
* If this is an EndPoint-to-EndPoint message on the same device, it will not
* get added to the NWK databufs. So it will not go OTA and it will not get
* a MACCB_DATA_CONFIRM_CMD callback. Thus it is necessary to generate the
* AF_DATA_CONFIRM_CMD here. Note that APSDE_DataConfirm() only generates one
* message with the first in line TransSeqNumber, even on a multi message.
* Also note that a reflected msg will not have its confirmation generated
* here.
*/
if ( (req.dstAddr.addrMode == Addr16Bit) &&
(req.dstAddr.addr.shortAddr == NLME_GetShortAddr()) )
{
afDataConfirm( srcEP->endPoint, *transID, stat );
}
if ( stat == afStatus_SUCCESS )
{
(*transID)++;
}
return (afStatus_t)stat;
}