void editTimerMode(int timerIdx, coord_t y, LcdFlags attr, uint8_t event)
{
TimerData * timer = &g_model.timers[timerIdx];
putsStrIdx(0*FW, y, STR_TIMER, timerIdx+1);
putsTimerMode(MODEL_SETUP_2ND_COLUMN, y, timer->mode, menuHorizontalPosition==0 ? attr : 0);
putsTimer(MODEL_SETUP_2ND_COLUMN+5*FW-2+5*FWNUM+1, y, timer->start, menuHorizontalPosition==1 ? attr|TIMEHOUR : TIMEHOUR, menuHorizontalPosition==2 ? attr|TIMEHOUR : TIMEHOUR);
if (attr && menuHorizontalPosition < 0) drawFilledRect(MODEL_SETUP_2ND_COLUMN-1, y-1, 11*FW, FH+1);
if (attr && s_editMode>0) {
div_t qr = div(timer->start, 60);
switch (menuHorizontalPosition) {
case 0:
{
swsrc_t timerMode = timer->mode;
if (timerMode < 0) timerMode -= TMRMODE_COUNT-1;
CHECK_INCDEC_MODELVAR_CHECK(event, timerMode, -TMRMODE_COUNT-SWSRC_LAST+1, TMRMODE_COUNT+SWSRC_LAST-1, isSwitchAvailableInTimers);
if (timerMode < 0) timerMode += TMRMODE_COUNT-1;
timer->mode = timerMode;
#if defined(AUTOSWITCH)
if (s_editMode>0) {
swsrc_t val = timer->mode - (TMRMODE_COUNT-1);
swsrc_t switchVal = checkIncDecMovedSwitch(val);
if (val != switchVal) {
timer->mode = switchVal + (TMRMODE_COUNT-1);
eeDirty(EE_MODEL);
}
}
#endif
break;
}
case 1:
qr.quot = checkIncDec(event, qr.quot, 0, 1439, EE_MODEL | NO_INCDEC_MARKS); // 23h59
timer->start = qr.rem + qr.quot*60;
break;
case 2:
qr.rem -= checkIncDecModel(event, qr.rem+2, 1, 62)-2;
timer->start -= qr.rem ;
if ((int16_t)timer->start < 0) timer->start=0;
if ((int32_t)timer->start > 86399) timer->start=86399; // 23h59:59
break;
}
}
}
void editTimerMode(int timerIdx, coord_t y, LcdFlags attr, uint8_t event)
{
TimerData * timer = &g_model.timers[timerIdx];
putsStrIdx(0*FW, y, STR_TIMER, timerIdx+1);
putsTimerMode(MODEL_SETUP_2ND_COLUMN, y, timer->mode, m_posHorz==0 ? attr : 0);
putsTimer(MODEL_SETUP_2ND_COLUMN+5*FW-2+5*FWNUM+1, y, timer->start, m_posHorz==1 ? attr : 0, m_posHorz==2 ? attr : 0);
if (attr && m_posHorz < 0) drawFilledRect(MODEL_SETUP_2ND_COLUMN-1, y-1, LCD_W-MODEL_SETUP_2ND_COLUMN-MENUS_SCROLLBAR_WIDTH+1, FH+1);
if (attr && s_editMode>0) {
div_t qr = div(timer->start, 60);
switch (m_posHorz) {
case 0:
{
swsrc_t timerMode = timer->mode;
if (timerMode < 0) timerMode -= TMRMODE_COUNT-1;
CHECK_INCDEC_MODELVAR_CHECK(event, timerMode, -TMRMODE_COUNT-SWSRC_LAST+1, TMRMODE_COUNT+SWSRC_LAST-1, isSwitchAvailableInTimers);
if (timerMode < 0) timerMode += TMRMODE_COUNT-1;
timer->mode = timerMode;
#if defined(AUTOSWITCH)
if (s_editMode>0) {
swsrc_t val = timer->mode - (TMRMODE_COUNT-1);
swsrc_t switchVal = checkIncDecMovedSwitch(val);
if (val != switchVal) {
timer->mode = switchVal + (TMRMODE_COUNT-1);
eeDirty(EE_MODEL);
}
}
#endif
break;
}
case 1:
CHECK_INCDEC_MODELVAR_ZERO(event, qr.quot, 59);
timer->start = qr.rem + qr.quot*60;
break;
case 2:
qr.rem -= checkIncDecModel(event, qr.rem+2, 1, 62)-2;
timer->start -= qr.rem ;
if ((int16_t)timer->start < 0) timer->start=0;
break;
}
}
}
void menuModelTelemetry(uint8_t event)
{
MENU(STR_MENUTELEMETRY, menuTabModel, e_Telemetry, ITEM_TELEMETRY_MAX+1, {0, TELEMETRY_TYPE_ROWS CHANNELS_ROWS RSSI_ROWS SENSORS_ROWS USRDATA_ROWS CASE_VARIO(LABEL(Vario)) CASE_VARIO(0) CASE_VARIO(VARIO_RANGE_ROWS) TELEMETRY_SCREEN_ROWS(0), TELEMETRY_SCREEN_ROWS(1), CASE_CPUARM(TELEMETRY_SCREEN_ROWS(2)) CASE_CPUARM(TELEMETRY_SCREEN_ROWS(3))});
uint8_t sub = m_posVert - 1;
switch (event) {
case EVT_KEY_BREAK(KEY_DOWN):
case EVT_KEY_BREAK(KEY_UP):
case EVT_KEY_BREAK(KEY_LEFT):
case EVT_KEY_BREAK(KEY_RIGHT):
if (s_editMode>0 && sub<=ITEM_TELEMETRY_RSSI_ALARM2)
frskySendAlarms(); // update FrSky module when edit mode exited
break;
}
for (uint8_t i=0; i<LCD_LINES-1; i++) {
coord_t y = MENU_HEADER_HEIGHT + 1 + i*FH;
uint8_t k = i + s_pgOfs;
#if defined(CPUARM)
for (int j=0; j<=k; j++) {
if (mstate_tab[j+1] == HIDDEN_ROW)
k++;
}
#endif
uint8_t blink = ((s_editMode>0) ? BLINK|INVERS : INVERS);
uint8_t attr = (sub == k ? blink : 0);
#if !defined(CPUARM)
uint8_t ch = TELEMETRY_CURRENT_EDIT_CHANNEL(k);
FrSkyChannelData & channel = g_model.frsky.channels[ch];
uint8_t dest = TELEM_A1-1+ch;
#endif
#if defined(CPUARM)
if (k>=ITEM_TELEMETRY_SENSOR1 && k<ITEM_TELEMETRY_SENSOR1+MAX_SENSORS) {
int index = k-ITEM_TELEMETRY_SENSOR1;
lcd_outdezAtt(INDENT_WIDTH, y, index+1, LEFT|attr);
lcd_putcAtt(lcdLastPos, y, ':', attr);
lcd_putsnAtt(3*FW, y, g_model.telemetrySensors[index].label, TELEM_LABEL_LEN, ZCHAR);
if (telemetryItems[index].isFresh()) {
lcd_putc(16*FW, y, '*');
}
TelemetryItem & telemetryItem = telemetryItems[index];
if (telemetryItem.isAvailable()) {
bool isOld = telemetryItem.isOld();
lcdNextPos = TELEM_COL2;
if (isOld) lcd_putc(lcdNextPos, y, '[');
putsTelemetryChannelValue(lcdNextPos, y, index, getValue(MIXSRC_FIRST_TELEM+3*index), LEFT);
if (isOld) lcd_putc(lcdLastPos, y, ']');
}
else {
lcd_putsAtt(TELEM_COL2, y, "---", 0); // TODO shortcut
}
if (attr) {
s_editMode = 0;
s_currIdx = index;
if (event == EVT_KEY_LONG(KEY_ENTER)) {
killEvents(event);
MENU_ADD_ITEM(STR_EDIT);
MENU_ADD_ITEM(STR_COPY);
MENU_ADD_ITEM(STR_DELETE);
menuHandler = onSensorMenu;
}
else if (event == EVT_KEY_BREAK(KEY_ENTER)) {
pushMenu(menuModelSensor);
}
}
}
else
#endif
switch (k) {
#if defined(CPUARM)
case ITEM_TELEMETRY_PROTOCOL_TYPE:
g_model.telemetryProtocol = selectMenuItem(TELEM_COL2, y, STR_TELEMETRY_TYPE, "\017FrSky S.PORT\0 FrSky D\0 FrSky D (cable)", g_model.telemetryProtocol, PROTOCOL_TELEMETRY_FIRST, CASE_PCBSKY9X(PROTOCOL_FRSKY_D_SECONDARY) attr, event);
break;
#endif
#if defined(CPUARM)
case ITEM_TELEMETRY_SENSORS_LABEL:
lcd_putsLeft(y, STR_TELEMETRY_SENSORS);
break;
case ITEM_TELEMETRY_NEWSENSOR:
lcd_putsAtt(0, y, STR_TELEMETRY_NEWSENSOR, attr);
if (attr && event==EVT_KEY_BREAK(KEY_ENTER)) {
s_editMode = 0;
int res = availableTelemetryIndex();
if (res >= 0) {
s_currIdx = res;
pushMenu(menuModelSensor);
}
else {
POPUP_WARNING(STR_TELEMETRYFULL);
}
}
break;
case ITEM_TELEMETRY_IGNORE_SENSORID:
ON_OFF_MENU_ITEM(g_model.ignoreSensorIds, TELEM_COL2, y, STR_IGNOREIDS, attr, event);
break;
#endif
#if !defined(CPUARM)
case ITEM_TELEMETRY_A1_LABEL:
case ITEM_TELEMETRY_A2_LABEL:
lcd_putsLeft(y, STR_ACHANNEL);
lcd_outdezAtt(2*FW, y, ch+1, 0);
putsTelemetryChannelValue(TELEM_COL2+6*FW, y, dest, frskyData.analog[ch].value, LEFT);
break;
case ITEM_TELEMETRY_A1_RANGE:
case ITEM_TELEMETRY_A2_RANGE:
lcd_putsLeft(y, STR_RANGE);
putsTelemetryChannelValue(TELEM_COL2, y, dest, 255-channel.offset, (m_posHorz<=0 ? attr : 0)|NO_UNIT|LEFT);
lcd_putsiAtt(lcdLastPos, y, STR_VTELEMUNIT, channel.type, m_posHorz!=0 ? attr : 0);
if (attr && (s_editMode>0 || p1valdiff)) {
if (m_posHorz == 0) {
uint16_t ratio = checkIncDec(event, channel.ratio, 0, 256, EE_MODEL);
if (checkIncDec_Ret) {
if (ratio == 127 && channel.multiplier > 0) {
channel.multiplier--; channel.ratio = 255;
}
else if (ratio == 256) {
if (channel.multiplier < FRSKY_MULTIPLIER_MAX) { channel.multiplier++; channel.ratio = 128; }
}
else {
channel.ratio = ratio;
}
}
}
else {
CHECK_INCDEC_MODELVAR_ZERO(event, channel.type, UNIT_A1A2_MAX);
}
}
break;
case ITEM_TELEMETRY_A1_OFFSET:
case ITEM_TELEMETRY_A2_OFFSET:
lcd_putsLeft(y, STR_OFFSET);
putsTelemetryChannelValue(TELEM_COL2, y, dest, 0, LEFT|attr);
if (attr) channel.offset = checkIncDec(event, channel.offset, -256, 256, EE_MODEL);
break;
case ITEM_TELEMETRY_A1_ALARM1:
case ITEM_TELEMETRY_A1_ALARM2:
case ITEM_TELEMETRY_A2_ALARM1:
case ITEM_TELEMETRY_A2_ALARM2:
{
uint8_t alarm = ((k==ITEM_TELEMETRY_A1_ALARM1 || k==ITEM_TELEMETRY_A2_ALARM1) ? 0 : 1);
lcd_putsLeft(y, STR_ALARM);
lcd_putsiAtt(TELEM_COL2, y, STR_VALARM, ALARM_LEVEL(ch, alarm), m_posHorz<=0 ? attr : 0);
lcd_putsiAtt(TELEM_COL2+4*FW, y, STR_VALARMFN, ALARM_GREATER(ch, alarm), (CURSOR_ON_LINE() || m_posHorz==1) ? attr : 0);
putsTelemetryChannelValue(TELEM_COL2+6*FW, y, dest, channel.alarms_value[alarm], ((CURSOR_ON_LINE() || m_posHorz==2) ? attr : 0) | LEFT);
if (attr && (s_editMode>0 || p1valdiff)) {
uint8_t t;
switch (m_posHorz) {
case 0:
t = ALARM_LEVEL(ch, alarm);
channel.alarms_level = (channel.alarms_level & ~(3<<(2*alarm))) + (checkIncDecModel(event, t, 0, 3) << (2*alarm));
break;
case 1:
t = ALARM_GREATER(ch, alarm);
if (t != checkIncDecModel(event, t, 0, 1)) {
channel.alarms_greater ^= (1 << alarm);
frskySendAlarms();
}
break;
case 2:
channel.alarms_value[alarm] = checkIncDec(event, channel.alarms_value[alarm], 0, 255, EE_MODEL);
break;
}
}
break;
}
#endif
case ITEM_TELEMETRY_RSSI_LABEL:
lcd_putsLeft(y, PSTR("RSSI"));
break;
case ITEM_TELEMETRY_RSSI_ALARM1:
case ITEM_TELEMETRY_RSSI_ALARM2: {
uint8_t alarm = k-ITEM_TELEMETRY_RSSI_ALARM1;
lcd_putsLeft(y, STR_ALARM);
lcd_putsiAtt(TELEM_COL2, y, STR_VALARM, ((2+alarm+g_model.frsky.rssiAlarms[alarm].level)%4), m_posHorz<=0 ? attr : 0);
lcd_putc(TELEM_COL2+4*FW, y, '<');
lcd_outdezNAtt(TELEM_COL2+6*FW, y, getRssiAlarmValue(alarm), LEFT|(m_posHorz!=0 ? attr : 0), 3);
if (attr && (s_editMode>0 || p1valdiff)) {
switch (m_posHorz) {
case 0:
CHECK_INCDEC_MODELVAR(event, g_model.frsky.rssiAlarms[alarm].level, -3, 2); // circular (saves flash)
break;
case 1:
CHECK_INCDEC_MODELVAR(event, g_model.frsky.rssiAlarms[alarm].value, -30, 30);
break;
}
}
break;
}
#if !defined(CPUARM)
#if defined(FRSKY_HUB) || defined(WS_HOW_HIGH)
case ITEM_TELEMETRY_USR_LABEL:
lcd_putsLeft(y, STR_USRDATA);
break;
case ITEM_TELEMETRY_USR_PROTO:
lcd_putsLeft(y, STR_PROTO);
lcd_putsiAtt(TELEM_COL2, y, STR_VTELPROTO, g_model.frsky.usrProto, attr);
if (attr) CHECK_INCDEC_MODELVAR_ZERO(event, g_model.frsky.usrProto, USR_PROTO_LAST);
break;
case ITEM_TELEMETRY_USR_BLADES:
lcd_putsLeft(y, STR_BLADES);
lcd_outdezAtt(TELEM_COL2+FWNUM, y, 2+g_model.frsky.blades, attr);
if (attr) CHECK_INCDEC_MODELVAR_ZERO(event, g_model.frsky.blades, MAX_BLADES);
break;
#endif
case ITEM_TELEMETRY_USR_VOLTAGE_SOURCE:
lcd_putsLeft(y, STR_VOLTAGE);
lcd_putsiAtt(TELEM_COL2, y, STR_AMPSRC, g_model.frsky.voltsSource+1, attr);
if (attr) CHECK_INCDEC_MODELVAR_ZERO(event, g_model.frsky.voltsSource, FRSKY_VOLTS_SOURCE_LAST);
break;
case ITEM_TELEMETRY_USR_CURRENT_SOURCE:
lcd_putsLeft(y, STR_CURRENT);
lcd_putsiAtt(TELEM_COL2, y, STR_AMPSRC, g_model.frsky.currentSource, attr);
if (attr) CHECK_INCDEC_MODELVAR_ZERO(event, g_model.frsky.currentSource, FRSKY_CURRENT_SOURCE_LAST);
break;
#if defined(FAS_OFFSET) || !defined(CPUM64)
case ITEM_TELEMETRY_FAS_OFFSET:
lcd_putsLeft(y, STR_FAS_OFFSET);
lcd_outdezAtt(TELEM_COL2, y, g_model.frsky.fasOffset, attr|LEFT|PREC1);
lcd_outdezAtt(TELEM_COL2+6*FW, y, frskyData.hub.current, LEFT|PREC1);
lcd_putc(TELEM_COL2+8*FW, y, 'A');
if (attr) g_model.frsky.fasOffset = checkIncDec(event, g_model.frsky.fasOffset, -120, 120, EE_MODEL);
break;
#endif
#endif
#if defined(VARIO)
case ITEM_TELEMETRY_VARIO_LABEL:
lcd_putsLeft(y, STR_VARIO);
break;
case ITEM_TELEMETRY_VARIO_SOURCE:
lcd_putsLeft(y, STR_SOURCE);
#if defined(CPUARM)
putsMixerSource(TELEM_COL2, y, g_model.frsky.varioSource ? MIXSRC_FIRST_TELEM+3*(g_model.frsky.varioSource-1) : 0, attr);
if (attr) {
g_model.frsky.varioSource = checkIncDec(event, g_model.frsky.varioSource, 0, MAX_SENSORS, EE_MODEL|NO_INCDEC_MARKS, isSensorAvailable);
}
#else
lcd_putsiAtt(TELEM_COL2, y, STR_VARIOSRC, g_model.frsky.varioSource, attr);
if (attr) CHECK_INCDEC_MODELVAR(event, g_model.frsky.varioSource, 0, VARIO_SOURCE_LAST);
#endif
break;
case ITEM_TELEMETRY_VARIO_RANGE:
lcd_putsLeft(y, STR_LIMIT);
#if defined(PCBSTD)
lcd_outdezAtt(TELEM_COL2, y, 5+g_model.frsky.varioCenterMax, (m_posHorz==0 ? attr : 0)|PREC1|LEFT);
lcd_outdezAtt(TELEM_COL2+8*FW, y, 10+g_model.frsky.varioMax, (m_posHorz==1 ? attr : 0));
if (attr && (s_editMode>0 || p1valdiff)) {
switch (m_posHorz) {
case 0:
CHECK_INCDEC_MODELVAR(event, g_model.frsky.varioCenterMax, -15, +15);
break;
case 1:
CHECK_INCDEC_MODELVAR(event, g_model.frsky.varioMax, -7, 7);
break;
}
}
#else
lcd_outdezAtt(TELEM_COL2, y, -10+g_model.frsky.varioMin, (m_posHorz<=0 ? attr : 0)|LEFT);
lcd_outdezAtt(TELEM_COL2+7*FW-2, y, -5+g_model.frsky.varioCenterMin, ((CURSOR_ON_LINE() || m_posHorz==1) ? attr : 0)|PREC1);
lcd_outdezAtt(TELEM_COL2+10*FW, y, 5+g_model.frsky.varioCenterMax, ((CURSOR_ON_LINE() || m_posHorz==2) ? attr : 0)|PREC1);
lcd_outdezAtt(TELEM_COL2+13*FW+2, y, 10+g_model.frsky.varioMax, ((CURSOR_ON_LINE() || m_posHorz==3) ? attr : 0));
if (attr && (s_editMode>0 || p1valdiff)) {
switch (m_posHorz) {
case 0:
CHECK_INCDEC_MODELVAR(event, g_model.frsky.varioMin, -7, 7);
break;
case 1:
CHECK_INCDEC_MODELVAR(event, g_model.frsky.varioCenterMin, -16, 5+min<int8_t>(10, g_model.frsky.varioCenterMax+5));
break;
case 2:
CHECK_INCDEC_MODELVAR(event, g_model.frsky.varioCenterMax, -5+max<int8_t>(-10, g_model.frsky.varioCenterMin-5), +15);
break;
case 3:
CHECK_INCDEC_MODELVAR(event, g_model.frsky.varioMax, -7, 7);
break;
}
}
#endif
break;
#endif
case ITEM_TELEMETRY_SCREEN_LABEL1:
case ITEM_TELEMETRY_SCREEN_LABEL2:
#if defined(CPUARM)
case ITEM_TELEMETRY_SCREEN_LABEL3:
case ITEM_TELEMETRY_SCREEN_LABEL4:
{
uint8_t screenIndex = TELEMETRY_CURRENT_EDIT_SCREEN(k);
putsStrIdx(0*FW, y, STR_SCREEN, screenIndex+1);
TelemetryScreenType oldScreenType = TELEMETRY_SCREEN_TYPE(screenIndex);
TelemetryScreenType newScreenType = (TelemetryScreenType)selectMenuItem(TELEM_SCRTYPE_COL, y, PSTR(""), STR_VTELEMSCREENTYPE, oldScreenType, 0, TELEMETRY_SCREEN_TYPE_MAX, (m_posHorz==0 ? attr : 0), event);
if (newScreenType != oldScreenType) {
g_model.frsky.screensType = (g_model.frsky.screensType & (~(0x03 << (2*screenIndex)))) | (newScreenType << (2*screenIndex));
memset(&g_model.frsky.screens[screenIndex], 0, sizeof(g_model.frsky.screens[screenIndex]));
}
break;
}
#else
{
uint8_t screenIndex = (k < ITEM_TELEMETRY_SCREEN_LABEL2 ? 1 : 2);
putsStrIdx(0*FW, y, STR_SCREEN, screenIndex);
#if defined(GAUGES)
bool screenType = g_model.frsky.screensType & screenIndex;
if (screenType != (bool)selectMenuItem(TELEM_SCRTYPE_COL, y, PSTR(""), STR_VTELEMSCREENTYPE, screenType, 0, 1, attr, event))
g_model.frsky.screensType ^= screenIndex;
#endif
break;
}
#endif
case ITEM_TELEMETRY_SCREEN_LINE1:
case ITEM_TELEMETRY_SCREEN_LINE2:
case ITEM_TELEMETRY_SCREEN_LINE3:
case ITEM_TELEMETRY_SCREEN_LINE4:
case ITEM_TELEMETRY_SCREEN_LINE5:
case ITEM_TELEMETRY_SCREEN_LINE6:
case ITEM_TELEMETRY_SCREEN_LINE7:
case ITEM_TELEMETRY_SCREEN_LINE8:
#if defined(CPUARM)
case ITEM_TELEMETRY_SCREEN_LINE9:
case ITEM_TELEMETRY_SCREEN_LINE10:
case ITEM_TELEMETRY_SCREEN_LINE11:
case ITEM_TELEMETRY_SCREEN_LINE12:
case ITEM_TELEMETRY_SCREEN_LINE13:
case ITEM_TELEMETRY_SCREEN_LINE14:
case ITEM_TELEMETRY_SCREEN_LINE15:
case ITEM_TELEMETRY_SCREEN_LINE16:
#endif
{
uint8_t screenIndex, lineIndex;
if (k < ITEM_TELEMETRY_SCREEN_LABEL2) {
screenIndex = 0;
lineIndex = k-ITEM_TELEMETRY_SCREEN_LINE1;
}
#if defined(CPUARM)
else if (k >= ITEM_TELEMETRY_SCREEN_LABEL4) {
screenIndex = 3;
lineIndex = k-ITEM_TELEMETRY_SCREEN_LINE13;
}
else if (k >= ITEM_TELEMETRY_SCREEN_LABEL3) {
screenIndex = 2;
lineIndex = k-ITEM_TELEMETRY_SCREEN_LINE9;
}
#endif
else {
screenIndex = 1;
lineIndex = k-ITEM_TELEMETRY_SCREEN_LINE5;
}
#if defined(GAUGES)
if (IS_BARS_SCREEN(screenIndex)) {
FrSkyBarData & bar = g_model.frsky.screens[screenIndex].bars[lineIndex];
source_t barSource = bar.source;
#if defined(CPUARM)
putsMixerSource(TELEM_COL1, y, barSource, m_posHorz==0 ? attr : 0);
if (barSource) {
putsChannelValue(TELEM_BARS_COLMIN, y, barSource, bar.barMin, (m_posHorz==1 ? attr : 0) | LEFT);
putsChannelValue(TELEM_BARS_COLMAX, y, barSource, bar.barMax, (m_posHorz==2 ? attr : 0) | LEFT);
}
#else
lcd_putsiAtt(TELEM_COL1, y, STR_VTELEMCHNS, barSource, m_posHorz==0 ? attr : 0);
if (barSource) {
putsTelemetryChannelValue(TELEM_BARS_COLMIN, y, barSource-1, convertBarTelemValue(barSource, bar.barMin), (m_posHorz==1 ? attr : 0) | LEFT);
putsTelemetryChannelValue(TELEM_BARS_COLMAX, y, barSource-1, convertBarTelemValue(barSource, 255-bar.barMax), (m_posHorz==2 ? attr : 0) | LEFT);
}
#endif
else if (attr) {
MOVE_CURSOR_FROM_HERE();
}
if (attr && (s_editMode>0 || p1valdiff)) {
switch (m_posHorz) {
case 0:
#if defined(CPUARM)
bar.source = CHECK_INCDEC_MODELVAR_ZERO_CHECK(event, barSource, MIXSRC_LAST_TELEM, isSourceAvailable);
#else
bar.source = CHECK_INCDEC_MODELVAR_ZERO(event, barSource, TELEM_DISPLAY_MAX);
#endif
if (checkIncDec_Ret) {
bar.barMin = 0;
#if defined(CPUARM)
bar.barMax = 0;
#else
bar.barMax = 255 - maxBarTelemValue(bar.source);
#endif
}
break;
case 1:
#if defined(CPUARM)
bar.barMin = checkIncDec(event, bar.barMin, -30000, bar.barMax, EE_MODEL|NO_INCDEC_MARKS);
#else
bar.barMin = checkIncDec(event, bar.barMin, 0, 254-bar.barMax, EE_MODEL|NO_INCDEC_MARKS);
#endif
break;
case 2:
#if defined(CPUARM)
bar.barMax = checkIncDec(event, bar.barMax, bar.barMin, 30000, EE_MODEL|NO_INCDEC_MARKS);
#else
bar.barMax = 255 - checkIncDec(event, 255-bar.barMax, bar.barMin+1, maxBarTelemValue(barSource), EE_MODEL|NO_INCDEC_MARKS);
#endif
break;
}
}
}
else
#endif
{
for (uint8_t c=0; c<NUM_LINE_ITEMS; c++) {
uint8_t cellAttr = (m_posHorz==c ? attr : 0);
source_t & value = g_model.frsky.screens[screenIndex].lines[lineIndex].sources[c];
uint8_t pos[] = {INDENT_WIDTH, TELEM_COL2};
#if defined(CPUARM)
putsMixerSource(pos[c], y, value, cellAttr);
if (cellAttr && (s_editMode>0 || p1valdiff)) {
CHECK_INCDEC_MODELVAR_ZERO_CHECK(event, value, MIXSRC_LAST_TELEM, isSourceAvailable);
}
#else
lcd_putsiAtt(pos[c], y, STR_VTELEMCHNS, value, cellAttr);
if (cellAttr && (s_editMode>0 || p1valdiff)) {
CHECK_INCDEC_MODELVAR_ZERO_CHECK(event, value, (lineIndex==3 && c==0) ? TELEM_STATUS_MAX : TELEM_DISPLAY_MAX, isTelemetrySourceAvailable);
}
#endif
}
if (attr && m_posHorz == NUM_LINE_ITEMS) {
REPEAT_LAST_CURSOR_MOVE();
}
}
break;
}
}
}
}
void menuModelLimits(uint8_t event)
{
int sub = menuVerticalPosition;
if (sub < NUM_CHNOUT) {
#if defined(PPM_CENTER_ADJUSTABLE) || defined(PPM_UNIT_US)
lcd_outdezAtt(13*FW, 0, PPM_CH_CENTER(sub)+channelOutputs[sub]/2, 0);
lcd_puts(13*FW, 0, STR_US);
#else
lcd_outdezAtt(13*FW, 0, calcRESXto1000(channelOutputs[sub]), PREC1);
#endif
}
MENU(STR_MENULIMITS, menuTabModel, e_Limits, NUM_CHNOUT+1, { NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, 0 });
if (sub<NUM_CHNOUT && menuHorizontalPosition>=0) {
displayColumnHeader(STR_LIMITS_HEADERS, menuHorizontalPosition);
}
if (warningResult) {
warningResult = 0;
LimitData *ld = limitAddress(sub);
ld->revert = !ld->revert;
eeDirty(EE_MODEL);
}
for (int i=0; i<NUM_BODY_LINES; i++) {
coord_t y = MENU_HEADER_HEIGHT + 1 + i*FH;
uint8_t k = i+menuVerticalOffset;
if (k==NUM_CHNOUT) {
// last line available - add the "copy trim menu" line
uint8_t attr = (sub==NUM_CHNOUT) ? INVERS : 0;
lcd_putsAtt(CENTER_OFS, y, STR_TRIMS2OFFSETS, NO_HIGHLIGHT() ? 0 : attr);
if (attr) {
s_editMode = 0;
if (event==EVT_KEY_LONG(KEY_ENTER)) {
START_NO_HIGHLIGHT();
killEvents(event);
moveTrimsToOffsets(); // if highlighted and menu pressed - move trims to offsets
}
}
return;
}
LimitData *ld = limitAddress(k);
int16_t v = (ld->revert) ? -LIMIT_OFS(ld) : LIMIT_OFS(ld);
char swVal = '-'; // '-', '<', '>'
if ((channelOutputs[k] - v) > 50) swVal = (ld->revert ? 127 : 126); // Switch to raw inputs? - remove trim!
if ((channelOutputs[k] - v) < -50) swVal = (ld->revert ? 126 : 127);
lcd_putc(LIMITS_DIRECTION_POS, y, swVal);
int limit = (g_model.extendedLimits ? LIMIT_EXT_MAX : 1000);
putsChn(0, y, k+1, (sub==k && menuHorizontalPosition < 0) ? INVERS : 0);
if (sub==k && menuHorizontalPosition < 0 && event==EVT_KEY_LONG(KEY_ENTER) && !READ_ONLY()) {
killEvents(event);
POPUP_MENU_ADD_ITEM(STR_RESET);
POPUP_MENU_ADD_ITEM(STR_COPY_TRIMS_TO_OFS);
POPUP_MENU_ADD_ITEM(STR_COPY_STICKS_TO_OFS);
popupMenuHandler = onLimitsMenu;
}
for (int j=0; j<ITEM_LIMITS_COUNT; j++) {
LcdFlags attr = ((sub==k && menuHorizontalPosition==j) ? ((s_editMode>0) ? BLINK|INVERS : INVERS) : 0);
uint8_t active = (attr && s_editMode>0) ;
if (active) STICK_SCROLL_DISABLE();
switch(j)
{
case ITEM_LIMITS_CH_NAME:
editName(LIMITS_NAME_POS, y, ld->name, sizeof(ld->name), event, attr);
break;
case ITEM_LIMITS_OFFSET:
if (GV_IS_GV_VALUE(ld->offset, -1000, 1000) || (attr && event == EVT_KEY_LONG(KEY_ENTER))) {
ld->offset = GVAR_MENU_ITEM(LIMITS_OFFSET_POS, y, ld->offset, -1000, 1000, attr|PREC1, 0, event);
break;
}
#if defined(PPM_UNIT_US)
lcd_outdezAtt(LIMITS_OFFSET_POS, y, ((int32_t)ld->offset*128) / 25, attr|PREC1);
#else
lcd_outdezAtt(LIMITS_OFFSET_POS, y, ld->offset, attr|PREC1);
#endif
if (active) {
ld->offset = checkIncDec(event, ld->offset, -1000, 1000, EE_MODEL, NULL, stops1000);
}
else if (attr && event==EVT_KEY_LONG(KEY_MENU)) {
copySticksToOffset(k);
s_editMode = 0;
}
break;
case ITEM_LIMITS_MIN:
if (GV_IS_GV_VALUE(ld->min, -GV_RANGELARGE, GV_RANGELARGE) || (attr && event == EVT_KEY_LONG(KEY_ENTER))) {
ld->min = GVAR_MENU_ITEM(LIMITS_MIN_POS, y, ld->min, -LIMIT_EXT_MAX, LIMIT_EXT_MAX, MIN_MAX_ATTR, 0, event);
break;
}
lcd_outdezAtt(LIMITS_MIN_POS, y, MIN_MAX_DISPLAY(ld->min-LIMITS_MIN_MAX_OFFSET), MIN_MAX_ATTR);
if (active) ld->min = LIMITS_MIN_MAX_OFFSET + checkIncDec(event, ld->min-LIMITS_MIN_MAX_OFFSET, -limit, 0, EE_MODEL, NULL, stops1000);
break;
case ITEM_LIMITS_MAX:
if (GV_IS_GV_VALUE(ld->max, -GV_RANGELARGE, GV_RANGELARGE) || (attr && event == EVT_KEY_LONG(KEY_ENTER))) {
ld->max = GVAR_MENU_ITEM(LIMITS_MAX_POS, y, ld->max, -LIMIT_EXT_MAX, LIMIT_EXT_MAX, MIN_MAX_ATTR, 0, event);
break;
}
lcd_outdezAtt(LIMITS_MAX_POS, y, MIN_MAX_DISPLAY(ld->max+LIMITS_MIN_MAX_OFFSET), MIN_MAX_ATTR);
if (active) ld->max = -LIMITS_MIN_MAX_OFFSET + checkIncDec(event, ld->max+LIMITS_MIN_MAX_OFFSET, 0, +limit, EE_MODEL, NULL, stops1000);
break;
case ITEM_LIMITS_DIRECTION:
{
uint8_t revert = ld->revert;
#if defined(PPM_CENTER_ADJUSTABLE)
lcd_putcAtt(LIMITS_REVERT_POS, y, revert ? 127 : 126, attr);
#else
lcd_putsiAtt(LIMITS_REVERT_POS, y, STR_MMMINV, revert, attr);
#endif
if (active) {
uint8_t revert_new = checkIncDecModel(event, revert, 0, 1);
if (checkIncDec_Ret && isThrottleOutput(k)) {
POPUP_CONFIRMATION(STR_INVERT_THR);
}
else {
ld->revert = revert_new;
}
}
break;
}
#if defined(CURVES)
case ITEM_LIMITS_CURVE:
putsCurve(LIMITS_CURVE_POS, y, ld->curve, attr);
if (attr && event==EVT_KEY_LONG(KEY_ENTER) && ld->curve>0) {
s_curveChan = (ld->curve<0 ? -ld->curve-1 : ld->curve-1);
pushMenu(menuModelCurveOne);
}
if (active) {
CHECK_INCDEC_MODELVAR(event, ld->curve, -MAX_CURVES, +MAX_CURVES);
}
break;
#endif
#if defined(PPM_CENTER_ADJUSTABLE)
case ITEM_LIMITS_PPM_CENTER:
lcd_outdezAtt(LIMITS_PPM_CENTER_POS, y, PPM_CENTER+ld->ppmCenter, attr);
if (active) {
CHECK_INCDEC_MODELVAR(event, ld->ppmCenter, -PPM_CENTER_MAX, +PPM_CENTER_MAX);
}
break;
#endif
#if defined(PPM_LIMITS_SYMETRICAL)
case ITEM_LIMITS_SYMETRICAL:
lcd_putcAtt(LCD_W-FW-MENUS_SCROLLBAR_WIDTH, y, ld->symetrical ? '=' : '\306', attr);
if (active) {
CHECK_INCDEC_MODELVAR_ZERO(event, ld->symetrical, 1);
}
break;
#endif
}
}
}
}
int8_t checkIncDecModelZero(uint8_t event, int8_t i_val, int8_t i_max)
{
return checkIncDecModel(event, i_val, 0, i_max);
}
void menuModelSetup(uint8_t event)
{
#if defined(CPUM64)
#define CURSOR_ON_CELL (true)
#define MODEL_SETUP_MAX_LINES ((IS_PPM_PROTOCOL(protocol)||IS_DSM2_PROTOCOL(protocol)||IS_PXX_PROTOCOL(protocol)) ? 1+ITEM_MODEL_SETUP_MAX : ITEM_MODEL_SETUP_MAX)
uint8_t protocol = g_model.protocol;
MENU_TAB({ 0, 0, 2, CASE_PERSISTENT_TIMERS(0) 0, 0, 2, CASE_PERSISTENT_TIMERS(0) 0, 0, 0, 0, 0, 0, 0, 0, 0, 5, NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS-1, FIELD_PROTOCOL_MAX, 2 });
#else
#define CURSOR_ON_CELL (true)
#define MODEL_SETUP_MAX_LINES ((IS_PPM_PROTOCOL(protocol)||IS_DSM2_PROTOCOL(protocol)||IS_PXX_PROTOCOL(protocol)) ? 1+ITEM_MODEL_SETUP_MAX : ITEM_MODEL_SETUP_MAX)
uint8_t protocol = g_model.protocol;
MENU_TAB({ 0, 0, 2, CASE_PERSISTENT_TIMERS(0) 0, 0, 2, CASE_PERSISTENT_TIMERS(0) 0, 0, 0, 1, 0, 0, 0, 0, 0, NUM_SWITCHES, NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS-1, FIELD_PROTOCOL_MAX, 2, });
#endif
MENU_CHECK(menuTabModel, e_ModelSetup, MODEL_SETUP_MAX_LINES);
TITLE(STR_MENUSETUP);
uint8_t sub = menuVerticalPosition - 1;
int8_t editMode = s_editMode;
for (uint8_t i=0; i<NUM_BODY_LINES; ++i) {
coord_t y = MENU_HEADER_HEIGHT + 1 + i*FH;
uint8_t k = i+menuVerticalOffset;
LcdFlags blink = ((editMode>0) ? BLINK|INVERS : INVERS);
LcdFlags attr = (sub == k ? blink : 0);
switch(k) {
case ITEM_MODEL_NAME:
editSingleName(MODEL_SETUP_2ND_COLUMN, y, STR_MODELNAME, g_model.header.name, sizeof(g_model.header.name), event, attr);
break;
case ITEM_MODEL_TIMER1:
case ITEM_MODEL_TIMER2:
case ITEM_MODEL_TIMER1_MINUTE_BEEP:
case ITEM_MODEL_TIMER2_MINUTE_BEEP:
case ITEM_MODEL_TIMER1_COUNTDOWN_BEEP:
case ITEM_MODEL_TIMER2_COUNTDOWN_BEEP:
{
TimerData *timer = &g_model.timers[k>=ITEM_MODEL_TIMER2 ? 1 : 0];
if (k==ITEM_MODEL_TIMER1_MINUTE_BEEP || k==ITEM_MODEL_TIMER2_MINUTE_BEEP) {
timer->minuteBeep = onoffMenuItem(timer->minuteBeep, MODEL_SETUP_2ND_COLUMN, y, STR_MINUTEBEEP, attr, event);
}
else if (k==ITEM_MODEL_TIMER1_COUNTDOWN_BEEP || k==ITEM_MODEL_TIMER2_COUNTDOWN_BEEP) {
timer->countdownBeep = onoffMenuItem(timer->countdownBeep, MODEL_SETUP_2ND_COLUMN, y, STR_BEEPCOUNTDOWN, attr, event);
}
else {
lcdDrawStringWithIndex(0*FW, y, STR_TIMER, k>=ITEM_MODEL_TIMER2 ? 2 : 1);
lcdPutsTimerMode(MODEL_SETUP_2ND_COLUMN, y, timer->mode, menuHorizontalPosition==0 ? attr : 0);
putsTimer(MODEL_SETUP_2ND_COLUMN+5*FW-2+5*FWNUM+1, y, timer->start, menuHorizontalPosition==1 ? attr : 0, menuHorizontalPosition==2 ? attr : 0);
if (attr && (editMode>0 || p1valdiff)) {
div_t qr = div(timer->start, 60);
switch (menuHorizontalPosition) {
case 0:
CHECK_INCDEC_MODELVAR_CHECK(event, timer->mode, SWSRC_FIRST, TMRMODE_COUNT+SWSRC_LAST-1/*SWSRC_None removed*/, isSwitchAvailableInTimers);
break;
case 1:
CHECK_INCDEC_MODELVAR_ZERO(event, qr.quot, 59);
timer->start = qr.rem + qr.quot*60;
break;
case 2:
qr.rem -= checkIncDecModel(event, qr.rem+2, 1, 62)-2;
timer->start -= qr.rem ;
#if defined(CPUM2560)
if ((int16_t)timer->start < 0) timer->start=0;
if ((int16_t)timer->start > 5999) timer->start=32399; // 8:59:59
#endif
break;
}
}
}
break;
}
#if defined(CPUM2560)
case ITEM_MODEL_TIMER1_PERSISTENT:
case ITEM_MODEL_TIMER2_PERSISTENT:
{
TimerData &timer = g_model.timers[k==ITEM_MODEL_TIMER2_PERSISTENT];
timer.persistent = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_PERSISTENT, STR_VPERSISTENT, timer.persistent, 0, 2, attr, event);
break;
}
#endif
case ITEM_MODEL_EXTENDED_LIMITS:
ON_OFF_MENU_ITEM(g_model.extendedLimits, MODEL_SETUP_2ND_COLUMN, y, STR_ELIMITS, attr, event);
break;
case ITEM_MODEL_EXTENDED_TRIMS:
#if defined(CPUM64)
ON_OFF_MENU_ITEM(g_model.extendedTrims, MODEL_SETUP_2ND_COLUMN, y, STR_ETRIMS, attr, event);
#else
ON_OFF_MENU_ITEM(g_model.extendedTrims, MODEL_SETUP_2ND_COLUMN, y, STR_ETRIMS, menuHorizontalPosition<=0 ? attr : 0, event==EVT_KEY_BREAK(KEY_ENTER) ? event : 0);
lcdDrawTextAtt(MODEL_SETUP_2ND_COLUMN+3*FW, y, STR_RESET_BTN, (menuHorizontalPosition>0 && !NO_HIGHLIGHT()) ? attr : 0);
if (attr && menuHorizontalPosition>0) {
s_editMode = 0;
if (event==EVT_KEY_LONG(KEY_ENTER)) {
START_NO_HIGHLIGHT();
for (uint8_t i=0; i<MAX_FLIGHT_MODES; i++) {
memclear(&g_model.flightModeData[i], TRIMS_ARRAY_SIZE);
}
eeDirty(EE_MODEL);
AUDIO_WARNING1();
}
}
#endif
break;
case ITEM_MODEL_TRIM_INC:
g_model.trimInc = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_TRIMINC, STR_VTRIMINC, g_model.trimInc, -2, 2, attr, event);
break;
case ITEM_MODEL_THROTTLE_REVERSED:
ON_OFF_MENU_ITEM(g_model.throttleReversed, MODEL_SETUP_2ND_COLUMN, y, STR_THROTTLEREVERSE, attr, event ) ;
break;
case ITEM_MODEL_THROTTLE_TRACE:
{
lcdDrawTextLeft(y, STR_TTRACE);
if (attr) CHECK_INCDEC_MODELVAR_ZERO(event, g_model.thrTraceSrc, NUM_POTS+NUM_CHNOUT);
uint8_t idx = g_model.thrTraceSrc + MIXSRC_Thr;
if (idx > MIXSRC_Thr)
idx += 1;
if (idx >= MIXSRC_FIRST_POT+NUM_POTS)
idx += MIXSRC_CH1 - MIXSRC_FIRST_POT - NUM_POTS;
putsMixerSource(MODEL_SETUP_2ND_COLUMN, y, idx, attr);
break;
}
case ITEM_MODEL_THROTTLE_TRIM:
ON_OFF_MENU_ITEM(g_model.thrTrim, MODEL_SETUP_2ND_COLUMN, y, STR_TTRIM, attr, event);
break;
case ITEM_MODEL_THROTTLE_WARNING:
g_model.disableThrottleWarning = !onoffMenuItem(!g_model.disableThrottleWarning, MODEL_SETUP_2ND_COLUMN, y, STR_THROTTLEWARNING, attr, event);
break;
case ITEM_MODEL_SWITCHES_WARNING:
{
lcdDrawTextLeft(y, STR_SWITCHWARNING);
swarnstate_t states = g_model.switchWarningState;
char c;
if (attr) {
s_editMode = 0;
if (!READ_ONLY()) {
switch (event) {
CASE_EVT_ROTARY_BREAK
case EVT_KEY_BREAK(KEY_ENTER):
#if defined(CPUM64)
g_model.switchWarningEnable ^= (1 << menuHorizontalPosition);
eeDirty(EE_MODEL);
#else
if (menuHorizontalPosition < NUM_SWITCHES-1) {
g_model.switchWarningEnable ^= (1 << menuHorizontalPosition);
eeDirty(EE_MODEL);
}
#endif
break;
case EVT_KEY_LONG(KEY_ENTER):
#if defined(CPUM64)
getMovedSwitch();
g_model.switchWarningState = switches_states;
AUDIO_WARNING1();
eeDirty(EE_MODEL);
#else
if (menuHorizontalPosition == NUM_SWITCHES-1) {
START_NO_HIGHLIGHT();
getMovedSwitch();
g_model.switchWarningState = switches_states;
AUDIO_WARNING1();
eeDirty(EE_MODEL);
}
#endif
killEvents(event);
break;
}
}
}
LcdFlags line = attr;
for (uint8_t i=0; i<NUM_SWITCHES-1/*not on TRN switch*/; i++) {
uint8_t swactive = !(g_model.switchWarningEnable & 1 << i);
attr = 0;
if (IS_3POS(i)) {
c = '0'+(states & 0x03);
states >>= 2;
}
else {
if ((states & 0x01) && swactive)
attr = INVERS;
c = pgm_read_byte(STR_VSWITCHES - 2 + 9 + (3*(i+1)));
states >>= 1;
}
if (line && (menuHorizontalPosition == i)) {
attr = BLINK;
if (swactive)
attr |= INVERS;
}
lcdDrawCharAtt(MODEL_SETUP_2ND_COLUMN+i*FW, y, (swactive || (attr & BLINK)) ? c : '-', attr);
#if !defined(CPUM64)
lcdDrawTextAtt(MODEL_SETUP_2ND_COLUMN+(NUM_SWITCHES*FW), y, PSTR("<]"), (menuHorizontalPosition == NUM_SWITCHES-1 && !NO_HIGHLIGHT()) ? line : 0);
#endif
}
break;
}
case ITEM_MODEL_BEEP_CENTER:
lcdDrawTextLeft(y, STR_BEEPCTR);
for (uint8_t i=0; i<NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS; i++) {
// TODO flash saving, \001 not needed in STR_RETA123
coord_t x = MODEL_SETUP_2ND_COLUMN+i*FW;
lcdDrawTextAtIndex(x, y, STR_RETA123, i, ((menuHorizontalPosition==i) && attr) ? BLINK|INVERS : (((g_model.beepANACenter & ((BeepANACenter)1<<i)) || (attr && CURSOR_ON_LINE())) ? INVERS : 0 ) );
}
if (attr && CURSOR_ON_CELL) {
if (event==EVT_KEY_BREAK(KEY_ENTER) || p1valdiff) {
if (READ_ONLY_UNLOCKED()) {
s_editMode = 0;
g_model.beepANACenter ^= ((BeepANACenter)1<<menuHorizontalPosition);
eeDirty(EE_MODEL);
}
}
}
break;
case ITEM_MODEL_PPM1_PROTOCOL:
lcdDrawTextLeft(y, NO_INDENT(STR_PROTO));
lcdDrawTextAtIndex(MODEL_SETUP_2ND_COLUMN, y, STR_VPROTOS, protocol, menuHorizontalPosition<=0 ? attr : 0);
if (IS_PPM_PROTOCOL(protocol)) {
lcdDrawTextAtIndex(MODEL_SETUP_2ND_COLUMN+7*FW, y, STR_NCHANNELS, g_model.ppmNCH+2, menuHorizontalPosition!=0 ? attr : 0);
}
else if (menuHorizontalPosition>0 && attr) {
MOVE_CURSOR_FROM_HERE();
}
if (attr && (editMode>0 || p1valdiff || (!IS_PPM_PROTOCOL(protocol) && !IS_DSM2_PROTOCOL(protocol)))) {
switch (menuHorizontalPosition) {
case 0:
CHECK_INCDEC_MODELVAR_ZERO(event, g_model.protocol, PROTO_MAX-1);
break;
case 1:
CHECK_INCDEC_MODELVAR(event, g_model.ppmNCH, -2, 4);
g_model.ppmFrameLength = g_model.ppmNCH * 8;
break;
}
}
break;
#if 0
case ITEM_MODEL_PPM2_PROTOCOL:
lcdDrawTextLeft(y, PSTR("Port2"));
lcdDrawTextAtIndex(MODEL_SETUP_2ND_COLUMN, y, STR_VPROTOS, 0, 0);
lcdDrawTextAtt(MODEL_SETUP_2ND_COLUMN+4*FW+3, y, STR_CH, menuHorizontalPosition<=0 ? attr : 0);
lcdDrawNumberAttUnit(lcdLastPos, y, g_model.moduleData[1].channelsStart+1, LEFT | (menuHorizontalPosition<=0 ? attr : 0));
lcdDrawChar(lcdLastPos, y, '-');
lcdDrawNumberAttUnit(lcdLastPos + FW+1, y, g_model.moduleData[1].channelsStart+8+g_model.moduleData[1].channelsCount, LEFT | (menuHorizontalPosition!=0 ? attr : 0));
if (attr && (editMode>0 || p1valdiff)) {
switch (menuHorizontalPosition) {
case 0:
CHECK_INCDEC_MODELVAR_ZERO(event, g_model.moduleData[1].channelsStart, 32-8-g_model.moduleData[1].channelsCount);
SET_DEFAULT_PPM_FRAME_LENGTH(1);
break;
case 1:
CHECK_INCDEC_MODELVAR(event, g_model.moduleData[1].channelsCount, -4, min<int8_t>(8, 32-8-g_model.moduleData[1].channelsStart));
SET_DEFAULT_PPM_FRAME_LENGTH(1);
break;
}
}
break;
case ITEM_MODEL_PPM2_PARAMS:
lcdDrawTextLeft(y, STR_PPMFRAME);
lcdDrawText(MODEL_SETUP_2ND_COLUMN+3*FW, y, STR_MS);
lcdDrawNumberAttUnit(MODEL_SETUP_2ND_COLUMN, y, (int16_t)g_model.moduleData[1].ppmFrameLength*5 + 225, (menuHorizontalPosition<=0 ? attr : 0) | PREC1|LEFT);
lcdDrawChar(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, 'u');
lcdDrawNumberAttUnit(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, (g_model.moduleData[1].ppmDelay*50)+300, (menuHorizontalPosition < 0 || menuHorizontalPosition==1) ? attr : 0);
lcdDrawCharAtt(MODEL_SETUP_2ND_COLUMN+10*FW, y, g_model.moduleData[1].ppmPulsePol ? '+' : '-', (menuHorizontalPosition < 0 || menuHorizontalPosition==2) ? attr : 0);
if (attr && (editMode>0 || p1valdiff)) {
switch (menuHorizontalPosition) {
case 0:
CHECK_INCDEC_MODELVAR(event, g_model.moduleData[1].ppmFrameLength, -20, 35);
break;
case 1:
CHECK_INCDEC_MODELVAR(event, g_model.moduleData[1].ppmDelay, -4, 10);
break;
case 2:
CHECK_INCDEC_MODELVAR_ZERO(event, g_model.moduleData[1].ppmPulsePol, 1);
break;
}
}
break;
#endif
case ITEM_MODEL_PPM1_PARAMS:
if (IS_PPM_PROTOCOL(protocol)) {
lcdDrawTextLeft(y, STR_PPMFRAME);
lcdDrawText(MODEL_SETUP_2ND_COLUMN+3*FW, y, STR_MS);
lcdDrawNumberAttUnit(MODEL_SETUP_2ND_COLUMN, y, (int16_t)g_model.ppmFrameLength*5 + 225, (menuHorizontalPosition<=0 ? attr : 0) | PREC1|LEFT);
lcdDrawChar(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, 'u');
lcdDrawNumberAttUnit(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, (g_model.ppmDelay*50)+300, (CURSOR_ON_LINE() || menuHorizontalPosition==1) ? attr : 0);
lcdDrawCharAtt(MODEL_SETUP_2ND_COLUMN+10*FW, y, g_model.pulsePol ? '+' : '-', (CURSOR_ON_LINE() || menuHorizontalPosition==2) ? attr : 0);
if (attr && (editMode>0 || p1valdiff)) {
switch (menuHorizontalPosition) {
case 0:
CHECK_INCDEC_MODELVAR(event, g_model.ppmFrameLength, -20, 35);
break;
case 1:
CHECK_INCDEC_MODELVAR(event, g_model.ppmDelay, -4, 10);
break;
case 2:
CHECK_INCDEC_MODELVAR_ZERO(event, g_model.pulsePol, 1);
break;
}
}
}
#if defined(DSM2) || defined(PXX)
else if (IS_DSM2_PROTOCOL(protocol) || IS_PXX_PROTOCOL(protocol)) {
if (attr && menuHorizontalPosition > 1) {
REPEAT_LAST_CURSOR_MOVE(); // limit 3 column row to 2 colums (Rx_Num and RANGE fields)
}
lcdDrawTextLeft(y, STR_RXNUM);
lcdDrawNumberNAtt(MODEL_SETUP_2ND_COLUMN, y, g_model.header.modelId[0], (menuHorizontalPosition<=0 ? attr : 0) | LEADING0|LEFT, 2);
if (attr && (menuHorizontalPosition==0 && (editMode>0 || p1valdiff))) {
CHECK_INCDEC_MODELVAR_ZERO(event, g_model.header.modelId[0], 99);
}
#if defined(PXX)
if (protocol == PROTO_PXX) {
lcdDrawTextAtt(MODEL_SETUP_2ND_COLUMN+4*FW, y, STR_SYNCMENU, menuHorizontalPosition!=0 ? attr : 0);
uint8_t newFlag = 0;
if (attr && menuHorizontalPosition>0 && editMode>0) {
// send reset code
newFlag = MODULE_BIND;
}
moduleFlag[0] = newFlag;
}
#endif
#if defined(DSM2)
if (IS_DSM2_PROTOCOL(protocol)) {
lcdDrawTextAtt(MODEL_SETUP_2ND_COLUMN+4*FW, y, STR_MODULE_RANGE, menuHorizontalPosition!=0 ? attr : 0);
moduleFlag[0] = (attr && menuHorizontalPosition>0 && editMode>0) ? MODULE_RANGECHECK : 0; // [MENU] key toggles range check mode
}
#endif
}
#endif
break;
}
}
void menuModelSetup(uint8_t event)
{
horzpos_t l_posHorz = menuHorizontalPosition;
bool CURSOR_ON_CELL = (menuHorizontalPosition >= 0);
#if defined(TARANIS_INTERNAL_PPM)
MENU_TAB({ 0, 0, TIMERS_ROWS, TOPLCD_ROWS 0, 1, 0, 0, LABEL(Throttle), 0, 0, 0, LABEL(PreflightCheck), 0, 0, SW_WARN_ITEMS(), POT_WARN_ITEMS(),
NAVIGATION_LINE_BY_LINE|(NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS-1), 0,
LABEL(InternalModule),
INTERNAL_MODULE_MODE_ROWS,
INTERNAL_MODULE_CHANNELS_ROWS,
IF_INTERNAL_MODULE_ON(IS_MODULE_XJT(INTERNAL_MODULE) ? (HAS_RF_PROTOCOL_MODELINDEX(g_model.moduleData[INTERNAL_MODULE].rfProtocol) ? (uint8_t)2 : (uint8_t)1) : (IS_MODULE_PPM(INTERNAL_MODULE) ? (uint8_t)1 : HIDDEN_ROW)),
IF_INTERNAL_MODULE_ON((IS_MODULE_XJT(INTERNAL_MODULE)) ? FAILSAFE_ROWS(INTERNAL_MODULE) : HIDDEN_ROW),
LABEL(ExternalModule),
(IS_MODULE_XJT(EXTERNAL_MODULE) || IS_MODULE_DSM2(EXTERNAL_MODULE)) ? (uint8_t)1 : (uint8_t)0,
EXTERNAL_MODULE_CHANNELS_ROWS,
(IS_MODULE_XJT(EXTERNAL_MODULE) && !HAS_RF_PROTOCOL_MODELINDEX(g_model.moduleData[EXTERNAL_MODULE].rfProtocol)) ? (uint8_t)1 : (IS_MODULE_PPM(EXTERNAL_MODULE) || IS_MODULE_XJT(EXTERNAL_MODULE) || IS_MODULE_DSM2(EXTERNAL_MODULE)) ? (uint8_t)2 : HIDDEN_ROW,
IF_EXTERNAL_MODULE_XJT(FAILSAFE_ROWS(EXTERNAL_MODULE)),
LABEL(Trainer), 0, TRAINER_CHANNELS_ROWS(), IF_TRAINER_ON(2)});
#else
MENU_TAB({ 0, 0, TIMERS_ROWS, TOPLCD_ROWS 0, 1, 0, 0, LABEL(Throttle), 0, 0, 0, LABEL(PreflightCheck), 0, 0, SW_WARN_ITEMS(), POT_WARN_ITEMS(),
NAVIGATION_LINE_BY_LINE|(NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS-1), 0,
LABEL(InternalModule),
INTERNAL_MODULE_MODE_ROWS,
INTERNAL_MODULE_CHANNELS_ROWS,
IF_INTERNAL_MODULE_ON(HAS_RF_PROTOCOL_MODELINDEX(g_model.moduleData[INTERNAL_MODULE].rfProtocol) ? (uint8_t)2 : (uint8_t)1),
IF_INTERNAL_MODULE_ON(FAILSAFE_ROWS(INTERNAL_MODULE)),
LABEL(ExternalModule),
EXTERNAL_MODULE_MODE_ROWS,
EXTERNAL_MODULE_CHANNELS_ROWS,
(IS_MODULE_XJT(EXTERNAL_MODULE) && !HAS_RF_PROTOCOL_MODELINDEX(g_model.moduleData[EXTERNAL_MODULE].rfProtocol)) ? (uint8_t)1 : (IS_MODULE_PPM(EXTERNAL_MODULE) || IS_MODULE_XJT(EXTERNAL_MODULE) || IS_MODULE_DSM2(EXTERNAL_MODULE)) ? (uint8_t)2 : HIDDEN_ROW,
IF_EXTERNAL_MODULE_XJT(FAILSAFE_ROWS(EXTERNAL_MODULE)),
LABEL(Trainer), 0, TRAINER_CHANNELS_ROWS(), IF_TRAINER_ON(2)});
#endif
MENU_CHECK(STR_MENUSETUP, menuTabModel, e_ModelSetup, ITEM_MODEL_SETUP_MAX);
#if (defined(DSM2) || defined(PXX))
if (menuEvent) {
moduleFlag[0] = 0;
moduleFlag[1] = 0;
}
#endif
int sub = menuVerticalPosition;
for (int i=0; i<NUM_BODY_LINES; ++i) {
coord_t y = MENU_HEADER_HEIGHT + 1 + i*FH;
uint8_t k = i+menuVerticalOffset;
for (int j=0; j<=k; j++) {
if (mstate_tab[j] == HIDDEN_ROW)
k++;
}
LcdFlags blink = ((s_editMode>0) ? BLINK|INVERS : INVERS);
LcdFlags attr = (sub == k ? blink : 0);
switch(k) {
case ITEM_MODEL_NAME:
editSingleName(MODEL_SETUP_2ND_COLUMN, y, STR_MODELNAME, g_model.header.name, sizeof(g_model.header.name), event, attr);
memcpy(modelHeaders[g_eeGeneral.currModel].name, g_model.header.name, sizeof(g_model.header.name));
break;
case ITEM_MODEL_BITMAP:
lcd_putsLeft(y, STR_BITMAP);
if (ZEXIST(g_model.header.bitmap))
lcd_putsnAtt(MODEL_SETUP_2ND_COLUMN, y, g_model.header.bitmap, sizeof(g_model.header.bitmap), attr);
else
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, STR_VCSWFUNC, 0, attr);
if (attr && event==EVT_KEY_BREAK(KEY_ENTER) && READ_ONLY_UNLOCKED()) {
s_editMode = 0;
if (listSdFiles(BITMAPS_PATH, BITMAPS_EXT, sizeof(g_model.header.bitmap), g_model.header.bitmap, LIST_NONE_SD_FILE)) {
popupMenuHandler = onModelSetupBitmapMenu;
}
else {
POPUP_WARNING(STR_NO_BITMAPS_ON_SD);
}
}
break;
case ITEM_MODEL_TIMER1:
editTimerMode(0, y, attr, event);
break;
case ITEM_MODEL_TIMER1_NAME:
editSingleName(MODEL_SETUP_2ND_COLUMN, y, STR_TIMER_NAME, g_model.timers[0].name, LEN_TIMER_NAME, event, attr);
break;
case ITEM_MODEL_TIMER1_MINUTE_BEEP:
g_model.timers[0].minuteBeep = onoffMenuItem(g_model.timers[0].minuteBeep, MODEL_SETUP_2ND_COLUMN, y, STR_MINUTEBEEP, attr, event);
break;
case ITEM_MODEL_TIMER1_COUNTDOWN_BEEP:
g_model.timers[0].countdownBeep = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_BEEPCOUNTDOWN, STR_VBEEPCOUNTDOWN, g_model.timers[0].countdownBeep, COUNTDOWN_SILENT, COUNTDOWN_COUNT-1, attr, event);
break;
case ITEM_MODEL_TIMER1_PERSISTENT:
g_model.timers[0].persistent = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_PERSISTENT, STR_VPERSISTENT, g_model.timers[0].persistent, 0, 2, attr, event);
break;
#if TIMERS > 1
case ITEM_MODEL_TIMER2:
editTimerMode(1, y, attr, event);
break;
case ITEM_MODEL_TIMER2_NAME:
editSingleName(MODEL_SETUP_2ND_COLUMN, y, STR_TIMER_NAME, g_model.timers[1].name, LEN_TIMER_NAME, event, attr);
break;
case ITEM_MODEL_TIMER2_MINUTE_BEEP:
g_model.timers[1].minuteBeep = onoffMenuItem(g_model.timers[1].minuteBeep, MODEL_SETUP_2ND_COLUMN, y, STR_MINUTEBEEP, attr, event);
break;
case ITEM_MODEL_TIMER2_COUNTDOWN_BEEP:
g_model.timers[1].countdownBeep = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_BEEPCOUNTDOWN, STR_VBEEPCOUNTDOWN, g_model.timers[1].countdownBeep, COUNTDOWN_SILENT, COUNTDOWN_COUNT-1, attr, event);
break;
case ITEM_MODEL_TIMER2_PERSISTENT:
g_model.timers[1].persistent = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_PERSISTENT, STR_VPERSISTENT, g_model.timers[1].persistent, 0, 2, attr, event);
break;
#endif
#if TIMERS > 2
case ITEM_MODEL_TIMER3:
editTimerMode(2, y, attr, event);
break;
case ITEM_MODEL_TIMER3_NAME:
editSingleName(MODEL_SETUP_2ND_COLUMN, y, STR_TIMER_NAME, g_model.timers[2].name, LEN_TIMER_NAME, event, attr);
break;
case ITEM_MODEL_TIMER3_MINUTE_BEEP:
g_model.timers[2].minuteBeep = onoffMenuItem(g_model.timers[2].minuteBeep, MODEL_SETUP_2ND_COLUMN, y, STR_MINUTEBEEP, attr, event);
break;
case ITEM_MODEL_TIMER3_COUNTDOWN_BEEP:
g_model.timers[2].countdownBeep = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_BEEPCOUNTDOWN, STR_VBEEPCOUNTDOWN, g_model.timers[2].countdownBeep, COUNTDOWN_SILENT, COUNTDOWN_COUNT-1, attr, event);
break;
case ITEM_MODEL_TIMER3_PERSISTENT:
g_model.timers[2].persistent = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_PERSISTENT, STR_VPERSISTENT, g_model.timers[2].persistent, 0, 2, attr, event);
break;
#endif
#if defined(REV9E)
case ITEM_MODEL_TOP_LCD_TIMER:
lcd_putsLeft(y, STR_TOPLCDTIMER);
putsStrIdx(MODEL_SETUP_2ND_COLUMN, y, STR_TIMER, g_model.topLcdTimer+1, attr);
if (attr) {
g_model.topLcdTimer = checkIncDec(event, g_model.topLcdTimer, 0, TIMERS-1, EE_MODEL);
}
break;
#endif
case ITEM_MODEL_EXTENDED_LIMITS:
ON_OFF_MENU_ITEM(g_model.extendedLimits, MODEL_SETUP_2ND_COLUMN, y, STR_ELIMITS, attr, event);
break;
case ITEM_MODEL_EXTENDED_TRIMS:
ON_OFF_MENU_ITEM(g_model.extendedTrims, MODEL_SETUP_2ND_COLUMN, y, STR_ETRIMS, menuHorizontalPosition<=0 ? attr : 0, event==EVT_KEY_BREAK(KEY_ENTER) ? event : 0);
lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+3*FW, y, STR_RESET_BTN, (menuHorizontalPosition>0 && !NO_HIGHLIGHT()) ? attr : 0);
if (attr && menuHorizontalPosition>0) {
s_editMode = 0;
if (event==EVT_KEY_LONG(KEY_ENTER)) {
START_NO_HIGHLIGHT();
for (uint8_t i=0; i<MAX_FLIGHT_MODES; i++) {
memclear(&g_model.flightModeData[i], TRIMS_ARRAY_SIZE);
}
eeDirty(EE_MODEL);
AUDIO_WARNING1();
}
}
break;
case ITEM_MODEL_DISPLAY_TRIMS:
g_model.displayTrims = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_DISPLAY_TRIMS, STR_VDISPLAYTRIMS, g_model.displayTrims, 0, 2, attr, event);
break;
case ITEM_MODEL_TRIM_INC:
g_model.trimInc = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_TRIMINC, STR_VTRIMINC, g_model.trimInc, -2, 2, attr, event);
break;
case ITEM_MODEL_THROTTLE_LABEL:
lcd_putsLeft(y, STR_THROTTLE_LABEL);
break;
case ITEM_MODEL_THROTTLE_REVERSED:
ON_OFF_MENU_ITEM(g_model.throttleReversed, MODEL_SETUP_2ND_COLUMN, y, STR_THROTTLEREVERSE, attr, event ) ;
break;
case ITEM_MODEL_THROTTLE_TRACE:
{
lcd_putsLeft(y, STR_TTRACE);
if (attr) CHECK_INCDEC_MODELVAR_ZERO_CHECK(event, g_model.thrTraceSrc, NUM_POTS+NUM_CHNOUT, isThrottleSourceAvailable);
uint8_t idx = g_model.thrTraceSrc + MIXSRC_Thr;
if (idx > MIXSRC_Thr)
idx += 1;
if (idx >= MIXSRC_FIRST_POT+NUM_POTS)
idx += MIXSRC_CH1 - MIXSRC_FIRST_POT - NUM_POTS;
putsMixerSource(MODEL_SETUP_2ND_COLUMN, y, idx, attr);
break;
}
case ITEM_MODEL_THROTTLE_TRIM:
ON_OFF_MENU_ITEM(g_model.thrTrim, MODEL_SETUP_2ND_COLUMN, y, STR_TTRIM, attr, event);
break;
case ITEM_MODEL_PREFLIGHT_LABEL:
lcd_putsLeft(y, STR_PREFLIGHT);
break;
case ITEM_MODEL_CHECKLIST_DISPLAY:
ON_OFF_MENU_ITEM(g_model.displayChecklist, MODEL_SETUP_2ND_COLUMN, y, STR_CHECKLIST, attr, event);
break;
case ITEM_MODEL_THROTTLE_WARNING:
g_model.disableThrottleWarning = !onoffMenuItem(!g_model.disableThrottleWarning, MODEL_SETUP_2ND_COLUMN, y, STR_THROTTLEWARNING, attr, event);
break;
#if defined(REV9E)
case ITEM_MODEL_SWITCHES_WARNING2:
case ITEM_MODEL_SWITCHES_WARNING3:
case ITEM_MODEL_POTS_WARNING2:
if (i==0) {
if (CURSOR_MOVED_LEFT(event))
menuVerticalOffset--;
else
menuVerticalOffset++;
}
break;
#endif
case ITEM_MODEL_SWITCHES_WARNING:
{
#if defined(REV9E)
if (i>=NUM_BODY_LINES-2 && getSwitchWarningsCount() > 8*(NUM_BODY_LINES-i)) {
if (CURSOR_MOVED_LEFT(event))
menuVerticalOffset--;
else
menuVerticalOffset++;
break;
}
#endif
lcd_putsLeft(y, STR_SWITCHWARNING);
swarnstate_t states = g_model.switchWarningState;
char c;
if (attr) {
s_editMode = 0;
if (!READ_ONLY()) {
switch (event) {
CASE_EVT_ROTARY_BREAK
case EVT_KEY_BREAK(KEY_ENTER):
break;
case EVT_KEY_LONG(KEY_ENTER):
if (menuHorizontalPosition < 0) {
START_NO_HIGHLIGHT();
getMovedSwitch();
g_model.switchWarningState = switches_states;
AUDIO_WARNING1();
eeDirty(EE_MODEL);
}
killEvents(event);
break;
}
}
}
LcdFlags line = attr;
int current = 0;
for (int i=0; i<NUM_SWITCHES; i++) {
if (SWITCH_WARNING_ALLOWED(i)) {
div_t qr = div(current, 8);
if (!READ_ONLY() && event==EVT_KEY_BREAK(KEY_ENTER) && line && l_posHorz==current) {
g_model.switchWarningEnable ^= (1 << i);
eeDirty(EE_MODEL);
}
uint8_t swactive = !(g_model.switchWarningEnable & (1<<i));
c = "\300-\301"[states & 0x03];
lcd_putcAtt(MODEL_SETUP_2ND_COLUMN+qr.rem*(2*FW+1), y+FH*qr.quot, 'A'+i, line && (menuHorizontalPosition==current) ? INVERS : 0);
if (swactive) lcd_putc(lcdNextPos, y+FH*qr.quot, c);
++current;
}
states >>= 2;
}
if (attr && menuHorizontalPosition < 0) {
#if defined(REV9E)
drawFilledRect(MODEL_SETUP_2ND_COLUMN-1, y-1, 8*(2*FW+1), 1+FH*((current+7)/8));
#else
drawFilledRect(MODEL_SETUP_2ND_COLUMN-1, y-1, current*(2*FW+1), FH+1);
#endif
}
break;
}
case ITEM_MODEL_POTS_WARNING:
#if defined(REV9E)
if (i==NUM_BODY_LINES-1 && g_model.potsWarnMode) {
if (CURSOR_MOVED_LEFT(event))
menuVerticalOffset--;
else
menuVerticalOffset++;
break;
}
#endif
lcd_putsLeft(y, STR_POTWARNING);
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, PSTR("\004""OFF\0""Man\0""Auto"), g_model.potsWarnMode, (menuHorizontalPosition == 0) ? attr : 0);
if (attr && (menuHorizontalPosition == 0)) {
CHECK_INCDEC_MODELVAR(event, g_model.potsWarnMode, POTS_WARN_OFF, POTS_WARN_AUTO);
eeDirty(EE_MODEL);
}
if (attr) {
if (menuHorizontalPosition > 0) s_editMode = 0;
if (!READ_ONLY() && menuHorizontalPosition > 0) {
switch (event) {
case EVT_KEY_LONG(KEY_ENTER):
killEvents(event);
if (g_model.potsWarnMode == POTS_WARN_MANUAL) {
SAVE_POT_POSITION(menuHorizontalPosition-1);
AUDIO_WARNING1();
eeDirty(EE_MODEL);
}
break;
case EVT_KEY_BREAK(KEY_ENTER):
g_model.potsWarnEnabled ^= (1 << (menuHorizontalPosition-1));
eeDirty(EE_MODEL);
break;
}
}
}
if (g_model.potsWarnMode) {
coord_t x = MODEL_SETUP_2ND_COLUMN+28;
for (int i=0; i<NUM_POTS; ++i) {
if (i<NUM_XPOTS && !IS_POT_AVAILABLE(POT1+i)) {
if (attr && (menuHorizontalPosition==i+1)) REPEAT_LAST_CURSOR_MOVE();
}
else {
#if defined(REV9E)
if (i == NUM_XPOTS) {
y += FH;
x = MODEL_SETUP_2ND_COLUMN;
}
#endif
LcdFlags flags = ((menuHorizontalPosition==i+1) && attr) ? BLINK : 0;
if ((!attr || menuHorizontalPosition >= 0) && !(g_model.potsWarnEnabled & (1 << i))) {
flags |= INVERS;
}
// TODO add a new function
lcd_putsnAtt(x, y, STR_VSRCRAW+2+STR_VSRCRAW[0]*(NUM_STICKS+1+i), STR_VSRCRAW[0]-1, flags & ~ZCHAR);
x = lcdNextPos+3;
}
}
}
if (attr && menuHorizontalPosition < 0) {
#if defined(REV9E)
drawFilledRect(MODEL_SETUP_2ND_COLUMN-1, y-FH-1, LCD_W-MODEL_SETUP_2ND_COLUMN-MENUS_SCROLLBAR_WIDTH+1, 2*FH+1);
#else
drawFilledRect(MODEL_SETUP_2ND_COLUMN-1, y-1, LCD_W-MODEL_SETUP_2ND_COLUMN-MENUS_SCROLLBAR_WIDTH+1, FH+1);
#endif
}
break;
case ITEM_MODEL_BEEP_CENTER:
{
lcd_putsLeft(y, STR_BEEPCTR);
coord_t x = MODEL_SETUP_2ND_COLUMN;
for (int i=0; i<NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS; i++) {
if (i>=POT1 && i<POT1+NUM_XPOTS && !IS_POT_AVAILABLE(i)) {
if (attr && menuHorizontalPosition == i) REPEAT_LAST_CURSOR_MOVE();
continue;
}
lcd_putsiAtt(x, y, STR_RETA123, i, ((menuHorizontalPosition==i) && attr) ? BLINK|INVERS : (((g_model.beepANACenter & ((BeepANACenter)1<<i)) || (attr && CURSOR_ON_LINE())) ? INVERS : 0 ) );
x += FW;
}
if (attr && CURSOR_ON_CELL) {
if (event==EVT_KEY_BREAK(KEY_ENTER)) {
if (READ_ONLY_UNLOCKED()) {
s_editMode = 0;
g_model.beepANACenter ^= ((BeepANACenter)1<<menuHorizontalPosition);
eeDirty(EE_MODEL);
}
}
}
break;
}
case ITEM_MODEL_USE_GLOBAL_FUNCTIONS:
lcd_putsLeft(y, STR_USE_GLOBAL_FUNCS);
menu_lcd_onoff(MODEL_SETUP_2ND_COLUMN, y, !g_model.noGlobalFunctions, attr);
if (attr) g_model.noGlobalFunctions = !checkIncDecModel(event, !g_model.noGlobalFunctions, 0, 1);
break;
case ITEM_MODEL_INTERNAL_MODULE_LABEL:
lcd_putsLeft(y, TR_INTERNALRF);
break;
#if defined(TARANIS_INTERNAL_PPM)
case ITEM_MODEL_INTERNAL_MODULE_MODE:
lcd_putsLeft(y, STR_MODE);
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, STR_TARANIS_PROTOCOLS, g_model.moduleData[INTERNAL_MODULE].type, menuHorizontalPosition==0 ? attr : 0);
if (IS_MODULE_XJT(INTERNAL_MODULE))
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN+5*FW, y, STR_XJT_PROTOCOLS, 1+g_model.moduleData[INTERNAL_MODULE].rfProtocol, menuHorizontalPosition==1 ? attr : 0);
if (attr && s_editMode>0) {
switch (menuHorizontalPosition) {
case 0:
g_model.moduleData[INTERNAL_MODULE].type = checkIncDec(event, g_model.moduleData[INTERNAL_MODULE].type, MODULE_TYPE_NONE, MODULE_TYPE_COUNT-2, EE_MODEL, isModuleAvailable);
if (checkIncDec_Ret) {
g_model.moduleData[INTERNAL_MODULE].rfProtocol = 0;
g_model.moduleData[INTERNAL_MODULE].channelsStart = 0;
g_model.moduleData[INTERNAL_MODULE].channelsCount = 0;
}
break;
case 1:
g_model.moduleData[INTERNAL_MODULE].rfProtocol = checkIncDec(event, g_model.moduleData[INTERNAL_MODULE].rfProtocol, RF_PROTO_X16, RF_PROTO_LAST, EE_MODEL, isRfProtocolAvailable);
if (checkIncDec_Ret) {
g_model.moduleData[INTERNAL_MODULE].channelsStart = 0;
g_model.moduleData[INTERNAL_MODULE].channelsCount = 0;
}
}
}
break;
#else
case ITEM_MODEL_INTERNAL_MODULE_MODE:
lcd_putsLeft(y, STR_MODE);
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, STR_XJT_PROTOCOLS, 1+g_model.moduleData[0].rfProtocol, attr);
if (attr) {
g_model.moduleData[INTERNAL_MODULE].rfProtocol = checkIncDec(event, g_model.moduleData[INTERNAL_MODULE].rfProtocol, RF_PROTO_OFF, RF_PROTO_LAST, EE_MODEL, isRfProtocolAvailable);
if (checkIncDec_Ret) {
g_model.moduleData[0].type = MODULE_TYPE_XJT;
g_model.moduleData[0].channelsStart = 0;
g_model.moduleData[0].channelsCount = 0;
}
}
break;
#endif
case ITEM_MODEL_TRAINER_MODE:
g_model.trainerMode = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_MODE, STR_VTRAINERMODES, g_model.trainerMode, 0, HAS_WIRELESS_TRAINER_HARDWARE() ? TRAINER_MODE_MASTER_BATTERY_COMPARTMENT : TRAINER_MODE_MASTER_CPPM_EXTERNAL_MODULE, attr, event);
break;
case ITEM_MODEL_EXTERNAL_MODULE_LABEL:
lcd_putsLeft(y, TR_EXTERNALRF);
break;
case ITEM_MODEL_EXTERNAL_MODULE_MODE:
lcd_putsLeft(y, STR_MODE);
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, STR_TARANIS_PROTOCOLS, g_model.moduleData[EXTERNAL_MODULE].type, menuHorizontalPosition==0 ? attr : 0);
if (IS_MODULE_XJT(EXTERNAL_MODULE))
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN+5*FW, y, STR_XJT_PROTOCOLS, 1+g_model.moduleData[EXTERNAL_MODULE].rfProtocol, menuHorizontalPosition==1 ? attr : 0);
else if (IS_MODULE_DSM2(EXTERNAL_MODULE))
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN+5*FW, y, STR_DSM_PROTOCOLS, g_model.moduleData[EXTERNAL_MODULE].rfProtocol, menuHorizontalPosition==1 ? attr : 0);
if (attr && s_editMode>0) {
switch (menuHorizontalPosition) {
case 0:
g_model.moduleData[EXTERNAL_MODULE].type = checkIncDec(event, g_model.moduleData[EXTERNAL_MODULE].type, MODULE_TYPE_NONE, MODULE_TYPE_COUNT-1, EE_MODEL, isModuleAvailable);
if (checkIncDec_Ret) {
g_model.moduleData[EXTERNAL_MODULE].rfProtocol = 0;
g_model.moduleData[EXTERNAL_MODULE].channelsStart = 0;
g_model.moduleData[EXTERNAL_MODULE].channelsCount = 0;
}
break;
case 1:
if (IS_MODULE_DSM2(EXTERNAL_MODULE))
CHECK_INCDEC_MODELVAR(event, g_model.moduleData[EXTERNAL_MODULE].rfProtocol, DSM2_PROTO_LP45, DSM2_PROTO_DSMX);
else
g_model.moduleData[EXTERNAL_MODULE].rfProtocol = checkIncDec(event, g_model.moduleData[EXTERNAL_MODULE].rfProtocol, RF_PROTO_X16, RF_PROTO_LAST, EE_MODEL, isRfProtocolAvailable);
if (checkIncDec_Ret) {
g_model.moduleData[EXTERNAL_MODULE].channelsStart = 0;
g_model.moduleData[EXTERNAL_MODULE].channelsCount = 0;
}
}
}
break;
case ITEM_MODEL_TRAINER_LABEL:
lcd_putsLeft(y, STR_TRAINER);
break;
case ITEM_MODEL_INTERNAL_MODULE_CHANNELS:
case ITEM_MODEL_EXTERNAL_MODULE_CHANNELS:
case ITEM_MODEL_TRAINER_CHANNELS:
{
uint8_t moduleIdx = CURRENT_MODULE_EDITED(k);
ModuleData & moduleData = g_model.moduleData[moduleIdx];
lcd_putsLeft(y, STR_CHANNELRANGE);
if ((int8_t)PORT_CHANNELS_ROWS(moduleIdx) >= 0) {
lcd_putsAtt(MODEL_SETUP_2ND_COLUMN, y, STR_CH, menuHorizontalPosition==0 ? attr : 0);
lcd_outdezAtt(lcdLastPos, y, moduleData.channelsStart+1, LEFT | (menuHorizontalPosition==0 ? attr : 0));
lcd_putc(lcdLastPos, y, '-');
lcd_outdezAtt(lcdLastPos + FW+1, y, moduleData.channelsStart+NUM_CHANNELS(moduleIdx), LEFT | (menuHorizontalPosition==1 ? attr : 0));
if (attr && s_editMode>0) {
switch (menuHorizontalPosition) {
case 0:
CHECK_INCDEC_MODELVAR_ZERO(event, moduleData.channelsStart, 32-8-moduleData.channelsCount);
break;
case 1:
CHECK_INCDEC_MODELVAR(event, moduleData.channelsCount, -4, min<int8_t>(MAX_CHANNELS(moduleIdx), 32-8-moduleData.channelsStart));
#if defined(TARANIS_INTERNAL_PPM)
if ((k == ITEM_MODEL_EXTERNAL_MODULE_CHANNELS && g_model.moduleData[EXTERNAL_MODULE].type == MODULE_TYPE_PPM) || (k == ITEM_MODEL_INTERNAL_MODULE_CHANNELS && g_model.moduleData[INTERNAL_MODULE].type == MODULE_TYPE_PPM) || (k == ITEM_MODEL_TRAINER_CHANNELS)) {
SET_DEFAULT_PPM_FRAME_LENGTH(moduleIdx);
}
#else
if ((k == ITEM_MODEL_EXTERNAL_MODULE_CHANNELS && g_model.moduleData[EXTERNAL_MODULE].type == MODULE_TYPE_PPM) || (k == ITEM_MODEL_TRAINER_CHANNELS)) {
SET_DEFAULT_PPM_FRAME_LENGTH(moduleIdx);
}
#endif
break;
}
}
}
break;
}
case ITEM_MODEL_INTERNAL_MODULE_BIND:
case ITEM_MODEL_EXTERNAL_MODULE_BIND:
case ITEM_MODEL_TRAINER_SETTINGS:
{
uint8_t moduleIdx = CURRENT_MODULE_EDITED(k);
ModuleData & moduleData = g_model.moduleData[moduleIdx];
if (IS_MODULE_PPM(moduleIdx)) {
lcd_putsLeft(y, STR_PPMFRAME);
lcd_puts(MODEL_SETUP_2ND_COLUMN+3*FW, y, STR_MS);
lcd_outdezAtt(MODEL_SETUP_2ND_COLUMN, y, (int16_t)moduleData.ppmFrameLength*5 + 225, (menuHorizontalPosition<=0 ? attr : 0) | PREC1|LEFT);
lcd_putc(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, 'u');
lcd_outdezAtt(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, (moduleData.ppmDelay*50)+300, (CURSOR_ON_LINE() || menuHorizontalPosition==1) ? attr : 0);
lcd_putcAtt(MODEL_SETUP_2ND_COLUMN+10*FW, y, moduleData.ppmPulsePol ? '+' : '-', (CURSOR_ON_LINE() || menuHorizontalPosition==2) ? attr : 0);
if (attr && s_editMode>0) {
switch (menuHorizontalPosition) {
case 0:
CHECK_INCDEC_MODELVAR(event, moduleData.ppmFrameLength, -20, 35);
break;
case 1:
CHECK_INCDEC_MODELVAR(event, moduleData.ppmDelay, -4, 10);
break;
case 2:
CHECK_INCDEC_MODELVAR_ZERO(event, moduleData.ppmPulsePol, 1);
break;
}
}
}
else {
horzpos_t l_posHorz = menuHorizontalPosition;
coord_t xOffsetBind = MODEL_SETUP_BIND_OFS;
if (IS_MODULE_XJT(moduleIdx) && g_model.moduleData[moduleIdx].rfProtocol == RF_PROTO_D8) {
xOffsetBind = 0;
lcd_putsLeft(y, INDENT "Receiver");
if (attr) l_posHorz += 1;
}
else {
lcd_putsLeft(y, STR_RXNUM);
}
if (IS_MODULE_XJT(moduleIdx) || IS_MODULE_DSM2(moduleIdx)) {
if (xOffsetBind) lcd_outdezNAtt(MODEL_SETUP_2ND_COLUMN, y, g_model.header.modelId[moduleIdx], (l_posHorz==0 ? attr : 0) | LEADING0|LEFT, 2);
if (attr && l_posHorz==0) {
if (s_editMode>0) {
CHECK_INCDEC_MODELVAR_ZERO(event, g_model.header.modelId[moduleIdx], IS_MODULE_DSM2(moduleIdx) ? 20 : 63);
if (checkIncDec_Ret) {
modelHeaders[g_eeGeneral.currModel].modelId[moduleIdx] = g_model.header.modelId[moduleIdx];
}
}
if (s_editMode==0 && event==EVT_KEY_BREAK(KEY_ENTER)) {
checkModelIdUnique(g_eeGeneral.currModel, moduleIdx);
}
}
lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+xOffsetBind, y, STR_MODULE_BIND, l_posHorz==1 ? attr : 0);
lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+MODEL_SETUP_RANGE_OFS+xOffsetBind, y, STR_MODULE_RANGE, l_posHorz==2 ? attr : 0);
uint8_t newFlag = 0;
if (attr && l_posHorz>0 && s_editMode>0) {
if (l_posHorz == 1)
newFlag = MODULE_BIND;
else if (l_posHorz == 2) {
newFlag = MODULE_RANGECHECK;
}
}
moduleFlag[moduleIdx] = newFlag;
}
}
break;
}
case ITEM_MODEL_INTERNAL_MODULE_FAILSAFE:
case ITEM_MODEL_EXTERNAL_MODULE_FAILSAFE:
{
uint8_t moduleIdx = CURRENT_MODULE_EDITED(k);
ModuleData & moduleData = g_model.moduleData[moduleIdx];
lcd_putsLeft(y, TR_FAILSAFE);
if (IS_MODULE_XJT(moduleIdx)) {
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, STR_VFAILSAFE, moduleData.failsafeMode, menuHorizontalPosition==0 ? attr : 0);
if (moduleData.failsafeMode == FAILSAFE_CUSTOM) lcd_putsAtt(MODEL_SETUP_2ND_COLUMN + MODEL_SETUP_SET_FAILSAFE_OFS, y, STR_SET, menuHorizontalPosition==1 ? attr : 0);
if (attr) {
if (moduleData.failsafeMode != FAILSAFE_CUSTOM) {
menuHorizontalPosition = 0;
}
if (menuHorizontalPosition == 0) {
if (s_editMode > 0) {
CHECK_INCDEC_MODELVAR_ZERO(event, moduleData.failsafeMode, FAILSAFE_LAST);
if (checkIncDec_Ret) SEND_FAILSAFE_NOW(moduleIdx);
}
}
else if (menuHorizontalPosition == 1) {
s_editMode = 0;
if (moduleData.failsafeMode==FAILSAFE_CUSTOM && event==EVT_KEY_FIRST(KEY_ENTER)) {
g_moduleIdx = moduleIdx;
pushMenu(menuModelFailsafe);
}
}
else {
drawFilledRect(MODEL_SETUP_2ND_COLUMN, y, LCD_W-MODEL_SETUP_2ND_COLUMN-MENUS_SCROLLBAR_WIDTH, 8);
}
}
}
break;
}
}
}
#if defined(PXX)
if (IS_RANGECHECK_ENABLE()) {
displayPopup("RSSI: ");
lcd_outdezAtt(16+4*FW, 5*FH, TELEMETRY_RSSI(), BOLD);
}
#endif
}
int16_t checkIncDec(uint8_t event, int16_t val, int16_t i_min, int16_t i_max, uint8_t i_flags)
#endif
{
int16_t newval = val;
#if defined(DBLKEYS)
uint8_t in = KEYS_PRESSED();
if (EVT_KEY_MASK(event)) {
bool dblkey = true;
if (DBLKEYS_PRESSED_RGT_LFT(in))
newval = -val;
else if (DBLKEYS_PRESSED_RGT_UP(in)) {
newval = (i_max > 100 ? 100 : i_max);
#if defined(CPUARM)
if (i_flags & DBLKEYS_1000) newval *= 10;
#endif
}
else if (DBLKEYS_PRESSED_LFT_DWN(in)) {
newval = (i_min < -100 ? -100 : i_min);
#if defined(CPUARM)
if (i_flags & DBLKEYS_1000) newval *= 10;
#endif
}
else if (DBLKEYS_PRESSED_UP_DWN(in))
newval = 0;
else
dblkey = false;
#if defined(CPUARM)
#endif
if (dblkey) {
killEvents(KEY_UP);
killEvents(KEY_DOWN);
killEvents(KEY_RIGHT);
killEvents(KEY_LEFT);
#if defined(PCBTARANIS)
killEvents(KEY_PAGE);
killEvents(KEY_MENU);
killEvents(KEY_ENTER);
killEvents(KEY_EXIT);
#endif
event = 0;
}
}
#endif
#if defined(PCBTARANIS)
if (s_editMode>0 && (IS_ROTARY_RIGHT(event) || event==EVT_KEY_FIRST(KEY_UP) || event==EVT_KEY_REPT(KEY_UP))) {
#else
if (event==EVT_KEY_FIRST(KEY_RIGHT) || event==EVT_KEY_REPT(KEY_RIGHT) || (s_editMode>0 && (IS_ROTARY_RIGHT(event) || event==EVT_KEY_FIRST(KEY_UP) || event==EVT_KEY_REPT(KEY_UP)))) {
#endif
#if defined(CPUARM)
do {
if (IS_KEY_REPT(event) && (i_flags & INCDEC_REP10)) {
newval += min(10, i_max-val);
}
else {
newval++;
}
} while (isValueAvailable && !isValueAvailable(newval) && newval<=i_max);
if (newval > i_max) {
newval = val;
killEvents(event);
AUDIO_WARNING2();
}
else
#else
newval++;
#endif
AUDIO_KEYPAD_UP();
}
#if defined(PCBTARANIS)
else if (s_editMode>0 && (IS_ROTARY_LEFT(event) || event==EVT_KEY_FIRST(KEY_DOWN) || event==EVT_KEY_REPT(KEY_DOWN))) {
#else
else if (event==EVT_KEY_FIRST(KEY_LEFT) || event==EVT_KEY_REPT(KEY_LEFT) || (s_editMode>0 && (IS_ROTARY_LEFT(event) || event==EVT_KEY_FIRST(KEY_DOWN) || event==EVT_KEY_REPT(KEY_DOWN)))) {
#endif
#if defined(CPUARM)
do {
if (IS_KEY_REPT(event) && (i_flags & INCDEC_REP10)) {
newval -= min(10, val-i_min);
}
else {
newval--;
}
} while (isValueAvailable && !isValueAvailable(newval) && newval>=i_min);
if (newval < i_min) {
newval = val;
killEvents(event);
AUDIO_WARNING2();
}
else
#else
newval--;
#endif
AUDIO_KEYPAD_DOWN();
}
if (!READ_ONLY() && i_min==0 && i_max==1 && (event==EVT_KEY_BREAK(KEY_ENTER) || IS_ROTARY_BREAK(event))) {
s_editMode = 0;
newval = !val;
}
#if defined(NAVIGATION_POT1)
// change values based on P1
newval -= p1valdiff;
p1valdiff = 0;
#endif
#if defined(AUTOSWITCH)
if (i_flags & INCDEC_SWITCH) {
if (s_editMode>0) {
int8_t swtch = getMovedSwitch();
if (swtch) {
#if defined(PCBTARANIS)
if(swtch == SWSRC_SH2)
newval = (newval == SWSRC_SH2 ? SWSRC_SH0 : SWSRC_SH2);
else if(swtch != SWSRC_SH0)
newval = swtch;
#else
if (IS_MOMENTARY(newval) && IS_MOMENTARY(swtch))
newval = -newval;
else
newval = swtch;
#endif
}
}
}
#endif
#if defined(AUTOSOURCE)
if (i_flags & INCDEC_SOURCE) {
if (s_editMode>0) {
int8_t source = GET_MOVED_SOURCE(i_min, i_max);
if (source) {
newval = source;
}
#if defined(AUTOSWITCH)
else {
uint8_t swtch = abs(getMovedSwitch());
if (swtch) {
newval = switchToMix(swtch);
}
}
#endif
}
}
#endif
if (newval > i_max || newval < i_min) {
newval = (newval > i_max ? i_max : i_min);
killEvents(event);
AUDIO_WARNING2();
}
if (newval != val) {
if (!(i_flags & NO_INCDEC_MARKS) && (newval != i_max) && (newval != i_min) && (newval==0 || newval==-100 || newval==+100) && !IS_ROTARY_EVENT(event)) {
pauseEvents(event); // delay before auto-repeat continues
if (newval>val) // without AUDIO it's optimized, because the 2 sounds are the same
AUDIO_KEYPAD_UP();
else
AUDIO_KEYPAD_DOWN();
}
eeDirty(i_flags & (EE_GENERAL|EE_MODEL));
checkIncDec_Ret = (newval > val ? 1 : -1);
}
else {
checkIncDec_Ret = 0;
}
return newval;
}
#if defined(CPUM64)
int8_t checkIncDecModel(uint8_t event, int8_t i_val, int8_t i_min, int8_t i_max)
{
return checkIncDec(event, i_val, i_min, i_max, EE_MODEL);
}
int8_t checkIncDecModelZero(uint8_t event, int8_t i_val, int8_t i_max)
{
return checkIncDecModel(event, i_val, 0, i_max);
}
int8_t checkIncDecGen(uint8_t event, int8_t i_val, int8_t i_min, int8_t i_max)
{
return checkIncDec(event, i_val, i_min, i_max, EE_GENERAL);
}
#endif
bool check_simple(check_event_t event, uint8_t curr, const MenuFuncP *menuTab, uint8_t menuTabSize, vertpos_t maxrow)
{
return check(event, curr, menuTab, menuTabSize, 0, 0, maxrow);
}
bool check_submenu_simple(check_event_t event, uint8_t maxrow)
{
return check_simple(event, 0, 0, 0, maxrow);
}
void title(const pm_char * s)
{
lcd_putsAtt(0, 0, s, INVERS);
}
#define SCROLL_TH 64
#define SCROLL_POT1_TH 32
#if defined(CPUARM)
#define CURSOR_NOT_ALLOWED_IN_ROW(row) ((int8_t)MAXCOL(row) < 0)
#else
#define CURSOR_NOT_ALLOWED_IN_ROW(row) (MAXCOL(row) == TITLE_ROW)
#endif
#if defined(PCBTARANIS)
#define MAXCOL_RAW(row) (horTab ? pgm_read_byte(horTab+min(row, (vertpos_t)horTabMax)) : (const uint8_t)0)
#define MAXCOL(row) (MAXCOL_RAW(row) >= HIDDEN_ROW ? MAXCOL_RAW(row) : (const uint8_t)(MAXCOL_RAW(row) & (~NAVIGATION_LINE_BY_LINE)))
#define COLATTR(row) (MAXCOL_RAW(row) == (uint8_t)-1 ? (const uint8_t)0 : (const uint8_t)(MAXCOL_RAW(row) & NAVIGATION_LINE_BY_LINE))
#else
#define MAXCOL(row) (horTab ? pgm_read_byte(horTab+min(row, (vertpos_t)horTabMax)) : (const uint8_t)0)
#endif
#define INC(val, min, max) if (val<max) {val++;} else {val=min;}
#define DEC(val, min, max) if (val>min) {val--;} else {val=max;}
#if LCD_W >= 212
uint8_t scrollbar_X = LCD_W-1;
#endif
#if defined(CPUARM)
bool modelHasNotes()
{
char filename[sizeof(MODELS_PATH)+1+sizeof(g_model.header.name)+sizeof(TEXT_EXT)] = MODELS_PATH "/";
char *buf = strcat_modelname(&filename[sizeof(MODELS_PATH)], g_eeGeneral.currModel);
strcpy(buf, TEXT_EXT);
return isFileAvailable(filename);
}
void menuModelMixOne(uint8_t event)
{
if (event == EVT_KEY_LONG(KEY_MENU)) {
pushMenu(menuChannelsView);
killEvents(event);
}
TITLE(s_currCh ? STR_INSERTMIX : STR_EDITMIX);
MixData *md2 = mixAddress(s_currIdx) ;
putsChn(lcdLastPos+1*FW, 0, md2->destCh+1,0);
SUBMENU_NOTITLE(MIX_FIELD_COUNT, {0, 0, 0, 0, 0, CASE_CURVES(1) CASE_FLIGHT_MODES((MAX_FLIGHT_MODES-1) | NAVIGATION_LINE_BY_LINE) 0, 0 /*, ...*/});
#if MENU_COLUMNS > 1
lcd_vline(MENU_COLUMN2_X-4, FH+1, LCD_H-FH-1);
SET_SCROLLBAR_X(0);
#endif
int8_t sub = m_posVert;
int8_t editMode = s_editMode;
for (int k=0; k<MENU_COLUMNS*(LCD_LINES-1); k++) {
coord_t y;
coord_t COLUMN_X;
if (k >= LCD_LINES-1) {
y = 1 + (k-LCD_LINES+2)*FH;
COLUMN_X = MENU_COLUMN2_X;
}
else {
y = 1 + (k+1)*FH;
COLUMN_X = 0;
}
int8_t i = k;
#if MENU_COLUMNS < 2
i = i + s_pgOfs;
#endif
LcdFlags attr = (sub==i ? (editMode>0 ? BLINK|INVERS : INVERS) : 0);
switch(i) {
case MIX_FIELD_NAME:
editSingleName(COLUMN_X+MIXES_2ND_COLUMN, y, STR_MIXNAME, md2->name, sizeof(md2->name), event, attr);
break;
case MIX_FIELD_SOURCE:
lcd_putsColumnLeft(COLUMN_X, y, NO_INDENT(STR_SOURCE));
putsMixerSource(COLUMN_X+MIXES_2ND_COLUMN, y, md2->srcRaw, STREXPANDED|attr);
if (attr) CHECK_INCDEC_MODELSOURCE(event, md2->srcRaw, 1, MIXSRC_LAST);
break;
case MIX_FIELD_WEIGHT:
lcd_putsColumnLeft(COLUMN_X, y, STR_WEIGHT);
gvarWeightItem(COLUMN_X+MIXES_2ND_COLUMN, y, md2, attr|LEFT, event);
break;
case MIX_FIELD_OFFSET:
{
lcd_putsColumnLeft(COLUMN_X, y, NO_INDENT(STR_OFFSET));
u_int8int16_t offset;
MD_OFFSET_TO_UNION(md2, offset);
offset.word = GVAR_MENU_ITEM(COLUMN_X+MIXES_2ND_COLUMN, y, offset.word, GV_RANGELARGE_OFFSET_NEG, GV_RANGELARGE_OFFSET, attr|LEFT, 0, event);
MD_UNION_TO_OFFSET(offset, md2);
drawOffsetBar(COLUMN_X+MIXES_2ND_COLUMN+22, y, md2);
break;
}
case MIX_FIELD_TRIM:
lcd_putsColumnLeft(COLUMN_X, y, STR_TRIM);
menu_lcd_onoff(COLUMN_X+MIXES_2ND_COLUMN, y, !md2->carryTrim, attr);
if (attr) md2->carryTrim = !checkIncDecModel(event, !md2->carryTrim, 0, 1);
break;
#if defined(CURVES)
case MIX_FIELD_CURVE:
{
lcd_putsColumnLeft(COLUMN_X, y, STR_CURVE);
editCurveRef(COLUMN_X+MIXES_2ND_COLUMN, y, md2->curve, event, attr);
break;
}
#endif
#if defined(FLIGHT_MODES)
case MIX_FIELD_FLIGHT_PHASE:
md2->flightModes = editFlightModes(COLUMN_X+MIXES_2ND_COLUMN, y, event, md2->flightModes, attr);
break;
#endif
case MIX_FIELD_SWITCH:
md2->swtch = switchMenuItem(COLUMN_X+MIXES_2ND_COLUMN, y, md2->swtch, attr, event);
break;
case MIX_FIELD_WARNING:
lcd_putsColumnLeft(COLUMN_X+MIXES_2ND_COLUMN, y, STR_MIXWARNING);
if (md2->mixWarn)
lcd_outdezAtt(COLUMN_X+MIXES_2ND_COLUMN, y, md2->mixWarn, attr|LEFT);
else
lcd_putsAtt(COLUMN_X+MIXES_2ND_COLUMN, y, STR_OFF, attr);
if (attr) CHECK_INCDEC_MODELVAR_ZERO(event, md2->mixWarn, 3);
break;
case MIX_FIELD_MLTPX:
md2->mltpx = selectMenuItem(COLUMN_X+MIXES_2ND_COLUMN, y, STR_MULTPX, STR_VMLTPX, md2->mltpx, 0, 2, attr, event);
break;
case MIX_FIELD_DELAY_UP:
md2->delayUp = EDIT_DELAY(COLUMN_X, y, event, attr, STR_DELAYUP, md2->delayUp);
break;
case MIX_FIELD_DELAY_DOWN:
md2->delayDown = EDIT_DELAY(COLUMN_X, y, event, attr, STR_DELAYDOWN, md2->delayDown);
break;
case MIX_FIELD_SLOW_UP:
md2->speedUp = EDIT_DELAY(COLUMN_X, y, event, attr, STR_SLOWUP, md2->speedUp);
break;
case MIX_FIELD_SLOW_DOWN:
md2->speedDown = EDIT_DELAY(COLUMN_X, y, event, attr, STR_SLOWDOWN, md2->speedDown);
break;
}
}
}
void menuModelExpoOne(uint8_t event)
{
if (event == EVT_KEY_LONG(KEY_MENU)) {
pushMenu(menuChannelsView);
killEvents(event);
}
ExpoData *ed = expoAddress(s_currIdx);
putsMixerSource(7*FW+FW/2, 0, MIXSRC_FIRST_INPUT+ed->chn, 0);
SUBMENU(STR_MENUINPUTS, EXPO_FIELD_MAX, {0, 0, 0, ed->srcRaw >= MIXSRC_FIRST_TELEM ? (uint8_t)0 : (uint8_t)HIDDEN_ROW, 0, 0, CASE_CURVES(CURVE_ROWS) CASE_FLIGHT_MODES((MAX_FLIGHT_MODES-1) | NAVIGATION_LINE_BY_LINE) 0 /*, ...*/});
SET_SCROLLBAR_X(EXPO_ONE_2ND_COLUMN+10*FW);
int8_t sub = m_posVert;
coord_t y = MENU_HEADER_HEIGHT + 1;
for (unsigned int k=0; k<NUM_BODY_LINES; k++) {
int i = k + s_pgOfs;
for (int j=0; j<=i; ++j) {
if (j<(int)DIM(mstate_tab) && mstate_tab[j] == HIDDEN_ROW) {
++i;
}
}
LcdFlags attr = (sub==i ? (s_editMode>0 ? BLINK|INVERS : INVERS) : 0);
switch(i)
{
case EXPO_FIELD_INPUT_NAME:
editSingleName(EXPO_ONE_2ND_COLUMN, y, STR_INPUTNAME, g_model.inputNames[ed->chn], sizeof(g_model.inputNames[ed->chn]), event, attr);
break;
case EXPO_FIELD_NAME:
editSingleName(EXPO_ONE_2ND_COLUMN, y, STR_EXPONAME, ed->name, sizeof(ed->name), event, attr);
break;
case EXPO_FIELD_SOURCE:
lcd_putsLeft(y, NO_INDENT(STR_SOURCE));
putsMixerSource(EXPO_ONE_2ND_COLUMN, y, ed->srcRaw, STREXPANDED|attr);
if (attr) ed->srcRaw = checkIncDec(event, ed->srcRaw, INPUTSRC_FIRST, INPUTSRC_LAST, EE_MODEL|INCDEC_SOURCE|NO_INCDEC_MARKS, isInputSourceAvailable);
break;
case EXPO_FIELD_SCALE:
lcd_putsLeft(y, STR_SCALE);
putsTelemetryChannelValue(EXPO_ONE_2ND_COLUMN, y, (ed->srcRaw - MIXSRC_FIRST_TELEM)/3, convertTelemValue(ed->srcRaw - MIXSRC_FIRST_TELEM + 1, ed->scale), LEFT|attr);
if (attr) ed->scale = checkIncDec(event, ed->scale, 0, maxTelemValue(ed->srcRaw - MIXSRC_FIRST_TELEM + 1), EE_MODEL);
break;
case EXPO_FIELD_WEIGHT:
lcd_putsLeft(y, STR_WEIGHT);
ed->weight = GVAR_MENU_ITEM(EXPO_ONE_2ND_COLUMN, y, ed->weight, MIN_EXPO_WEIGHT, 100, LEFT|attr, 0, event);
break;
case EXPO_FIELD_OFFSET:
lcd_putsLeft(y, NO_INDENT(STR_OFFSET));
ed->offset = GVAR_MENU_ITEM(EXPO_ONE_2ND_COLUMN, y, ed->offset, -100, 100, LEFT|attr, 0, event);
break;
#if defined(CURVES)
case EXPO_FIELD_CURVE:
lcd_putsLeft(y, STR_CURVE);
editCurveRef(EXPO_ONE_2ND_COLUMN, y, ed->curve, event, attr);
break;
#endif
#if defined(FLIGHT_MODES)
case EXPO_FIELD_FLIGHT_MODES:
ed->flightModes = editFlightModes(EXPO_ONE_2ND_COLUMN, y, event, ed->flightModes, attr);
break;
#endif
case EXPO_FIELD_SWITCH:
ed->swtch = switchMenuItem(EXPO_ONE_2ND_COLUMN, y, ed->swtch, attr, event);
break;
case EXPO_FIELD_SIDE:
ed->mode = 4 - selectMenuItem(EXPO_ONE_2ND_COLUMN, y, STR_SIDE, STR_VSIDE, 4-ed->mode, 1, 3, attr, event);
break;
case EXPO_FIELD_TRIM:
uint8_t not_stick = (ed->srcRaw > MIXSRC_Ail);
int8_t carryTrim = -ed->carryTrim;
lcd_putsLeft(y, STR_TRIM);
lcd_putsiAtt(EXPO_ONE_2ND_COLUMN, y, STR_VMIXTRIMS, (not_stick && carryTrim == 0) ? 0 : carryTrim+1, m_posHorz==0 ? attr : 0);
if (attr) ed->carryTrim = -checkIncDecModel(event, carryTrim, not_stick ? TRIM_ON : -TRIM_OFF, -TRIM_AIL);
break;
}
y += FH;
}
DrawFunction(expoFn);
int x512 = getValue(ed->srcRaw);
if (ed->srcRaw >= MIXSRC_FIRST_TELEM) {
putsTelemetryChannelValue(LCD_W-8, 6*FH, (ed->srcRaw - MIXSRC_FIRST_TELEM) / 3, x512, 0);
if (ed->scale > 0) x512 = (x512 * 1024) / convertTelemValue(ed->srcRaw - MIXSRC_FIRST_TELEM + 1, ed->scale);
}
else {
lcd_outdezAtt(LCD_W-8, 6*FH, calcRESXto1000(x512), PREC1);
}
x512 = limit(-1024, x512, 1024);
int y512 = expoFn(x512);
y512 = limit(-1024, y512, 1024);
lcd_outdezAtt(LCD_W-8-6*FW, 1*FH, calcRESXto1000(y512), PREC1);
x512 = X0+x512/(RESX/WCHART);
y512 = (LCD_H-1) - ((y512+RESX)/2) * (LCD_H-1) / RESX;
lcd_vline(x512, y512-3, 3*2+1);
lcd_hline(x512-3, y512, 3*2+1);
}
void menuModelSetup(uint8_t event)
{
#if defined(CPUARM)
#define IF_EXTERNAL_MODULE_XJT(x) (IS_MODULE_XJT(EXTERNAL_MODULE) ? (uint8_t)x : HIDDEN_ROW)
#define IF_EXTERNAL_MODULE_ON(x) (g_model.moduleData[EXTERNAL_MODULE].type == MODULE_TYPE_NONE ? HIDDEN_ROW : (uint8_t)(x))
#define IS_D8_RX(x) (g_model.moduleData[x].rfProtocol == RF_PROTO_D8)
#define EXTERNAL_MODULE_CHANNELS_ROWS() IF_EXTERNAL_MODULE_ON(IS_MODULE_DSM2(EXTERNAL_MODULE) ? (uint8_t)0 : (uint8_t)1)
#define EXTERNAL_MODULE_SETTINGS_ROWS() (IS_MODULE_XJT(EXTERNAL_MODULE) && IS_D8_RX(EXTERNAL_MODULE)) ? (uint8_t)1 : (IS_MODULE_PPM(EXTERNAL_MODULE) || IS_MODULE_XJT(EXTERNAL_MODULE) || IS_MODULE_DSM2(EXTERNAL_MODULE)) ? (uint8_t)2 : HIDDEN_ROW
#if defined(PCBSKY9X) && defined(REVX)
#define OUTPUT_TYPE_ROWS() (IS_MODULE_PPM(EXTERNAL_MODULE) ? (uint8_t)0 : HIDDEN_ROW) ,
#else
#define OUTPUT_TYPE_ROWS()
#endif
#define TRAINER_CHANNELS_ROWS() (HIDDEN_ROW)
#define PORT_CHANNELS_ROWS(x) (x==EXTERNAL_MODULE ? EXTERNAL_MODULE_CHANNELS_ROWS() : 0)
#define FAILSAFE_ROWS(x) ((g_model.moduleData[x].rfProtocol==RF_PROTO_X16 || g_model.moduleData[x].rfProtocol==RF_PROTO_LR12) ? (g_model.moduleData[x].failsafeMode==FAILSAFE_CUSTOM ? (uint8_t)1 : (uint8_t)0) : HIDDEN_ROW)
#define CURSOR_ON_CELL (true)
#define MODEL_SETUP_MAX_LINES (1+ITEM_MODEL_SETUP_MAX)
#define POT_WARN_ITEMS() ((g_model.nPotsToWarn >> 6) ? (uint8_t)NUM_POTS : (uint8_t)0)
#define TIMER_ROWS 2, 0, CASE_PERSISTENT_TIMERS(0) 0, 0
#if (defined(PCBSKY9X) && !defined(REVA) && !defined(REVX))
#define EXTRA_MODULE_ROWS LABEL(ExtraModule), 1, 2,
#else
#define EXTRA_MODULE_ROWS
#endif
#define TRAINER_MODULE_ROWS
MENU_TAB({ 0, 0, TIMER_ROWS, TIMER_ROWS, TIMER_ROWS, 0, 1, 0, 0, 0, 0, 0, CASE_CPUARM(LABEL(PreflightCheck)) CASE_CPUARM(0) 0, 6, NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS-1, 0, LABEL(ExternalModule), (IS_MODULE_XJT(EXTERNAL_MODULE) || IS_MODULE_DSM2(EXTERNAL_MODULE)) ? (uint8_t)1 : (uint8_t)0, EXTERNAL_MODULE_CHANNELS_ROWS(), EXTERNAL_MODULE_SETTINGS_ROWS(), OUTPUT_TYPE_ROWS() IF_EXTERNAL_MODULE_XJT(FAILSAFE_ROWS(EXTERNAL_MODULE)), EXTRA_MODULE_ROWS TRAINER_MODULE_ROWS });
#elif defined(CPUM64)
#define CURSOR_ON_CELL (true)
#define MODEL_SETUP_MAX_LINES ((IS_PPM_PROTOCOL(protocol)||IS_DSM2_PROTOCOL(protocol)||IS_PXX_PROTOCOL(protocol)) ? 1+ITEM_MODEL_SETUP_MAX : ITEM_MODEL_SETUP_MAX)
uint8_t protocol = g_model.protocol;
MENU_TAB({ 0, 0, 2, CASE_PERSISTENT_TIMERS(0) 0, 0, 2, CASE_PERSISTENT_TIMERS(0) 0, 0, 0, 0, 0, 0, 0, 0, 0, 5, NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS-1, FIELD_PROTOCOL_MAX, 2 });
#else
#define CURSOR_ON_CELL (true)
#define MODEL_SETUP_MAX_LINES ((IS_PPM_PROTOCOL(protocol)||IS_DSM2_PROTOCOL(protocol)||IS_PXX_PROTOCOL(protocol)) ? 1+ITEM_MODEL_SETUP_MAX : ITEM_MODEL_SETUP_MAX)
uint8_t protocol = g_model.protocol;
MENU_TAB({ 0, 0, 2, CASE_PERSISTENT_TIMERS(0) 0, 0, 2, CASE_PERSISTENT_TIMERS(0) 0, 0, 0, 1, 0, 0, 0, 0, 0, NUM_SWITCHES, NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS-1, FIELD_PROTOCOL_MAX, 2, CASE_PCBSKY9X(1) CASE_PCBSKY9X(2) });
#endif
MENU_CHECK(menuTabModel, e_ModelSetup, MODEL_SETUP_MAX_LINES);
#if defined(CPUARM) && (defined(DSM2) || defined(PXX))
if (menuEvent) {
moduleFlag[0] = 0;
#if NUM_MODULES > 1
moduleFlag[1] = 0;
#endif
}
#endif
TITLE(STR_MENUSETUP);
uint8_t sub = m_posVert - 1;
int8_t editMode = s_editMode;
for (uint8_t i=0; i<NUM_BODY_LINES; ++i) {
coord_t y = MENU_HEADER_HEIGHT + 1 + i*FH;
uint8_t k = i+s_pgOfs;
#if defined(CPUARM)
for (int j=0; j<=k; j++) {
if (mstate_tab[j+1] == HIDDEN_ROW) {
if (++k >= (int)DIM(mstate_tab)) {
return;
}
}
}
#endif
LcdFlags blink = ((editMode>0) ? BLINK|INVERS : INVERS);
LcdFlags attr = (sub == k ? blink : 0);
switch(k) {
case ITEM_MODEL_NAME:
editSingleName(MODEL_SETUP_2ND_COLUMN, y, STR_MODELNAME, g_model.header.name, sizeof(g_model.header.name), event, attr);
#if defined(CPUARM)
memcpy(modelHeaders[g_eeGeneral.currModel].name, g_model.header.name, sizeof(g_model.header.name));
#endif
break;
#if defined(CPUARM)
case ITEM_MODEL_TIMER1:
case ITEM_MODEL_TIMER2:
case ITEM_MODEL_TIMER3:
{
unsigned int timerIdx = (k>=ITEM_MODEL_TIMER3 ? 2 : (k>=ITEM_MODEL_TIMER2 ? 1 : 0));
TimerData * timer = &g_model.timers[timerIdx];
putsStrIdx(0*FW, y, STR_TIMER, timerIdx+1);
putsTimerMode(MODEL_SETUP_2ND_COLUMN, y, timer->mode, m_posHorz==0 ? attr : 0);
putsTimer(MODEL_SETUP_2ND_COLUMN+5*FW-2+5*FWNUM+1, y, timer->start, m_posHorz==1 ? attr : 0, m_posHorz==2 ? attr : 0);
if (attr && (editMode>0 || p1valdiff)) {
div_t qr = div(timer->start, 60);
switch (m_posHorz) {
case 0:
{
int8_t timerMode = timer->mode;
if (timerMode < 0) timerMode -= TMRMODE_COUNT-1;
CHECK_INCDEC_MODELVAR_CHECK(event, timerMode, -TMRMODE_COUNT-SWSRC_LAST+1, TMRMODE_COUNT+SWSRC_LAST-1, isSwitchAvailableInTimers);
if (timerMode < 0) timerMode += TMRMODE_COUNT-1;
timer->mode = timerMode;
#if defined(AUTOSWITCH)
if (s_editMode>0) {
int8_t val = timer->mode - (TMRMODE_COUNT-1);
int8_t switchVal = checkIncDecMovedSwitch(val);
if (val != switchVal) {
timer->mode = switchVal + (TMRMODE_COUNT-1);
eeDirty(EE_MODEL);
}
}
#endif
break;
}
case 1:
CHECK_INCDEC_MODELVAR_ZERO(event, qr.quot, 59);
timer->start = qr.rem + qr.quot*60;
break;
case 2:
qr.rem -= checkIncDecModel(event, qr.rem+2, 1, 62)-2;
timer->start -= qr.rem ;
if ((int16_t)timer->start < 0) timer->start=0;
break;
}
}
break;
}
case ITEM_MODEL_TIMER1_NAME:
case ITEM_MODEL_TIMER2_NAME:
case ITEM_MODEL_TIMER3_NAME:
{
TimerData * timer = &g_model.timers[k>=ITEM_MODEL_TIMER3 ? 2 : (k>=ITEM_MODEL_TIMER2 ? 1 : 0)];
editSingleName(MODEL_SETUP_2ND_COLUMN, y, STR_TIMER_NAME, timer->name, sizeof(timer->name), event, attr);
break;
}
case ITEM_MODEL_TIMER1_MINUTE_BEEP:
case ITEM_MODEL_TIMER2_MINUTE_BEEP:
case ITEM_MODEL_TIMER3_MINUTE_BEEP:
{
TimerData * timer = &g_model.timers[k>=ITEM_MODEL_TIMER3 ? 2 : (k>=ITEM_MODEL_TIMER2 ? 1 : 0)];
timer->minuteBeep = onoffMenuItem(timer->minuteBeep, MODEL_SETUP_2ND_COLUMN, y, STR_MINUTEBEEP, attr, event);
break;
}
case ITEM_MODEL_TIMER1_COUNTDOWN_BEEP:
case ITEM_MODEL_TIMER2_COUNTDOWN_BEEP:
case ITEM_MODEL_TIMER3_COUNTDOWN_BEEP:
{
TimerData * timer = &g_model.timers[k>=ITEM_MODEL_TIMER3 ? 2 : (k>=ITEM_MODEL_TIMER2 ? 1 : 0)];
timer->countdownBeep = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_BEEPCOUNTDOWN, STR_VBEEPCOUNTDOWN, timer->countdownBeep, 0, 2, attr, event);
break;
}
case ITEM_MODEL_TIMER1_PERSISTENT:
case ITEM_MODEL_TIMER2_PERSISTENT:
case ITEM_MODEL_TIMER3_PERSISTENT:
{
TimerData * timer = &g_model.timers[k>=ITEM_MODEL_TIMER3 ? 2 : (k>=ITEM_MODEL_TIMER2 ? 1 : 0)];
timer->persistent = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_PERSISTENT, STR_VPERSISTENT, timer->persistent, 0, 2, attr, event);
break;
}
#else
case ITEM_MODEL_TIMER1:
case ITEM_MODEL_TIMER2:
case ITEM_MODEL_TIMER1_MINUTE_BEEP:
case ITEM_MODEL_TIMER2_MINUTE_BEEP:
case ITEM_MODEL_TIMER1_COUNTDOWN_BEEP:
case ITEM_MODEL_TIMER2_COUNTDOWN_BEEP:
{
TimerData *timer = &g_model.timers[k>=ITEM_MODEL_TIMER2 ? 1 : 0];
if (k==ITEM_MODEL_TIMER1_MINUTE_BEEP || k==ITEM_MODEL_TIMER2_MINUTE_BEEP) {
timer->minuteBeep = onoffMenuItem(timer->minuteBeep, MODEL_SETUP_2ND_COLUMN, y, STR_MINUTEBEEP, attr, event);
}
else if (k==ITEM_MODEL_TIMER1_COUNTDOWN_BEEP || k==ITEM_MODEL_TIMER2_COUNTDOWN_BEEP) {
timer->countdownBeep = onoffMenuItem(timer->countdownBeep, MODEL_SETUP_2ND_COLUMN, y, STR_BEEPCOUNTDOWN, attr, event);
}
else {
putsStrIdx(0*FW, y, STR_TIMER, k>=ITEM_MODEL_TIMER2 ? 2 : 1);
putsTimerMode(MODEL_SETUP_2ND_COLUMN, y, timer->mode, m_posHorz==0 ? attr : 0);
putsTimer(MODEL_SETUP_2ND_COLUMN+5*FW-2+5*FWNUM+1, y, timer->start, m_posHorz==1 ? attr : 0, m_posHorz==2 ? attr : 0);
if (attr && (editMode>0 || p1valdiff)) {
div_t qr = div(timer->start, 60);
switch (m_posHorz) {
case 0:
CHECK_INCDEC_MODELVAR_CHECK(event, timer->mode, SWSRC_FIRST, TMRMODE_COUNT+SWSRC_LAST-1/*SWSRC_None removed*/, isSwitchAvailableInTimers);
break;
case 1:
CHECK_INCDEC_MODELVAR_ZERO(event, qr.quot, 59);
timer->start = qr.rem + qr.quot*60;
break;
case 2:
qr.rem -= checkIncDecModel(event, qr.rem+2, 1, 62)-2;
timer->start -= qr.rem ;
break;
}
}
}
break;
}
#if defined(CPUM2560)
case ITEM_MODEL_TIMER1_PERSISTENT:
case ITEM_MODEL_TIMER2_PERSISTENT:
{
TimerData &timer = g_model.timers[k==ITEM_MODEL_TIMER2_PERSISTENT];
timer.persistent = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_PERSISTENT, STR_VPERSISTENT, timer.persistent, 0, 2, attr, event);
break;
}
#endif
#endif
case ITEM_MODEL_EXTENDED_LIMITS:
ON_OFF_MENU_ITEM(g_model.extendedLimits, MODEL_SETUP_2ND_COLUMN, y, STR_ELIMITS, attr, event);
break;
case ITEM_MODEL_EXTENDED_TRIMS:
#if defined(CPUM64)
ON_OFF_MENU_ITEM(g_model.extendedTrims, MODEL_SETUP_2ND_COLUMN, y, STR_ETRIMS, attr, event);
#else
ON_OFF_MENU_ITEM(g_model.extendedTrims, MODEL_SETUP_2ND_COLUMN, y, STR_ETRIMS, m_posHorz<=0 ? attr : 0, event==EVT_KEY_BREAK(KEY_ENTER) ? event : 0);
lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+3*FW, y, STR_RESET_BTN, m_posHorz>0 && !s_noHi ? attr : 0);
if (attr && m_posHorz>0) {
s_editMode = 0;
if (event==EVT_KEY_LONG(KEY_ENTER)) {
s_noHi = NO_HI_LEN;
for (uint8_t i=0; i<MAX_FLIGHT_MODES; i++) {
memclear(&g_model.flightModeData[i], TRIMS_ARRAY_SIZE);
}
eeDirty(EE_MODEL);
AUDIO_WARNING1();
}
}
#endif
break;
#if defined(CPUARM)
case ITEM_MODEL_DISPLAY_TRIMS:
g_model.displayTrims = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_DISPLAY_TRIMS, STR_VDISPLAYTRIMS, g_model.displayTrims, 0, 2, attr, event);
break;
#endif
case ITEM_MODEL_TRIM_INC:
g_model.trimInc = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_TRIMINC, STR_VTRIMINC, g_model.trimInc, -2, 2, attr, event);
break;
case ITEM_MODEL_THROTTLE_REVERSED:
ON_OFF_MENU_ITEM(g_model.throttleReversed, MODEL_SETUP_2ND_COLUMN, y, STR_THROTTLEREVERSE, attr, event ) ;
break;
case ITEM_MODEL_THROTTLE_TRACE:
{
lcd_putsLeft(y, STR_TTRACE);
if (attr) CHECK_INCDEC_MODELVAR_ZERO(event, g_model.thrTraceSrc, NUM_POTS+NUM_CHNOUT);
uint8_t idx = g_model.thrTraceSrc + MIXSRC_Thr;
if (idx > MIXSRC_Thr)
idx += 1;
if (idx >= MIXSRC_FIRST_POT+NUM_POTS)
idx += MIXSRC_CH1 - MIXSRC_FIRST_POT - NUM_POTS;
putsMixerSource(MODEL_SETUP_2ND_COLUMN, y, idx, attr);
break;
}
case ITEM_MODEL_THROTTLE_TRIM:
ON_OFF_MENU_ITEM(g_model.thrTrim, MODEL_SETUP_2ND_COLUMN, y, STR_TTRIM, attr, event);
break;
#if defined(CPUARM)
case ITEM_MODEL_PREFLIGHT_LABEL:
lcd_putsLeft(y, STR_PREFLIGHT);
break;
case ITEM_MODEL_CHECKLIST_DISPLAY:
ON_OFF_MENU_ITEM(g_model.displayChecklist, MODEL_SETUP_2ND_COLUMN, y, STR_CHECKLIST, attr, event);
break;
#endif
case ITEM_MODEL_THROTTLE_WARNING:
g_model.disableThrottleWarning = !onoffMenuItem(!g_model.disableThrottleWarning, MODEL_SETUP_2ND_COLUMN, y, STR_THROTTLEWARNING, attr, event);
break;
case ITEM_MODEL_SWITCHES_WARNING:
{
lcd_putsLeft(y, STR_SWITCHWARNING);
swarnstate_t states = g_model.switchWarningState;
char c;
if (attr) {
s_editMode = 0;
if (!READ_ONLY()) {
switch (event) {
CASE_EVT_ROTARY_BREAK
case EVT_KEY_BREAK(KEY_ENTER):
#if defined(CPUM64)
g_model.switchWarningEnable ^= (1 << m_posHorz);
eeDirty(EE_MODEL);
#else
if (m_posHorz < NUM_SWITCHES-1) {
g_model.switchWarningEnable ^= (1 << m_posHorz);
eeDirty(EE_MODEL);
}
#endif
break;
case EVT_KEY_LONG(KEY_ENTER):
#if defined(CPUM64)
getMovedSwitch();
g_model.switchWarningState = switches_states;
AUDIO_WARNING1();
eeDirty(EE_MODEL);
#else
if (m_posHorz == NUM_SWITCHES-1) {
s_noHi = NO_HI_LEN;
getMovedSwitch();
g_model.switchWarningState = switches_states;
AUDIO_WARNING1();
eeDirty(EE_MODEL);
}
#endif
killEvents(event);
break;
}
}
}
LcdFlags line = attr;
for (uint8_t i=0; i<NUM_SWITCHES-1/*not on TRN switch*/; i++) {
uint8_t swactive = !(g_model.switchWarningEnable & 1 << i);
attr = 0;
if (IS_3POS(i)) {
c = '0'+(states & 0x03);
states >>= 2;
}
else {
if ((states & 0x01) && swactive)
attr = INVERS;
c = pgm_read_byte(STR_VSWITCHES - 2 + 9 + (3*(i+1)));
states >>= 1;
}
if (line && (m_posHorz == i)) {
attr = BLINK;
if (swactive)
attr |= INVERS;
}
lcd_putcAtt(MODEL_SETUP_2ND_COLUMN+i*FW, y, (swactive || (attr & BLINK)) ? c : '-', attr);
#if !defined(CPUM64)
lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+(NUM_SWITCHES*FW), y, PSTR("<]"), (m_posHorz == NUM_SWITCHES-1 && !s_noHi) ? line : 0);
#endif
}
break;
}
case ITEM_MODEL_BEEP_CENTER:
lcd_putsLeft(y, STR_BEEPCTR);
for (uint8_t i=0; i<NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS; i++) {
// TODO flash saving, \001 not needed in STR_RETA123
coord_t x = MODEL_SETUP_2ND_COLUMN+i*FW;
lcd_putsiAtt(x, y, STR_RETA123, i, ((m_posHorz==i) && attr) ? BLINK|INVERS : (((g_model.beepANACenter & ((BeepANACenter)1<<i)) || (attr && CURSOR_ON_LINE())) ? INVERS : 0 ) );
}
if (attr && CURSOR_ON_CELL) {
if (event==EVT_KEY_BREAK(KEY_ENTER) || p1valdiff) {
if (READ_ONLY_UNLOCKED()) {
s_editMode = 0;
g_model.beepANACenter ^= ((BeepANACenter)1<<m_posHorz);
eeDirty(EE_MODEL);
}
}
}
break;
#if defined(CPUARM)
case ITEM_MODEL_USE_GLOBAL_FUNCTIONS:
lcd_putsLeft(y, STR_USE_GLOBAL_FUNCS);
menu_lcd_onoff(MODEL_SETUP_2ND_COLUMN, y, !g_model.noGlobalFunctions, attr);
if (attr) g_model.noGlobalFunctions = !checkIncDecModel(event, !g_model.noGlobalFunctions, 0, 1);
break;
#endif
#if defined(PCBSKY9X) && !defined(REVX)
case ITEM_MODEL_EXTRA_MODULE_LABEL:
lcd_putsLeft(y, "RF Port 2 (PPM)");
break;
#endif
#if defined(CPUARM)
case ITEM_MODEL_EXTERNAL_MODULE_LABEL:
lcd_putsLeft(y, TR_EXTERNALRF);
break;
case ITEM_MODEL_EXTERNAL_MODULE_MODE:
lcd_putsLeft(y, STR_MODE);
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, STR_TARANIS_PROTOCOLS, g_model.moduleData[EXTERNAL_MODULE].type, m_posHorz==0 ? attr : 0);
if (IS_MODULE_XJT(EXTERNAL_MODULE))
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN+5*FW, y, STR_XJT_PROTOCOLS, 1+g_model.moduleData[EXTERNAL_MODULE].rfProtocol, m_posHorz==1 ? attr : 0);
else if (IS_MODULE_DSM2(EXTERNAL_MODULE))
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN+5*FW, y, STR_DSM_PROTOCOLS, g_model.moduleData[EXTERNAL_MODULE].rfProtocol, m_posHorz==1 ? attr : 0);
if (attr && (editMode>0 || p1valdiff)) {
switch (m_posHorz) {
case 0:
g_model.moduleData[EXTERNAL_MODULE].type = checkIncDec(event, g_model.moduleData[EXTERNAL_MODULE].type, MODULE_TYPE_NONE, MODULE_TYPE_COUNT-1, EE_MODEL, isModuleAvailable);
if (checkIncDec_Ret) {
g_model.moduleData[EXTERNAL_MODULE].rfProtocol = 0;
g_model.moduleData[EXTERNAL_MODULE].channelsStart = 0;
if (g_model.moduleData[EXTERNAL_MODULE].type == MODULE_TYPE_PPM)
g_model.moduleData[EXTERNAL_MODULE].channelsCount = 0;
else
g_model.moduleData[EXTERNAL_MODULE].channelsCount = MAX_EXTERNAL_MODULE_CHANNELS();
}
break;
case 1:
if (IS_MODULE_DSM2(EXTERNAL_MODULE))
CHECK_INCDEC_MODELVAR(event, g_model.moduleData[EXTERNAL_MODULE].rfProtocol, DSM2_PROTO_LP45, DSM2_PROTO_DSMX);
else
CHECK_INCDEC_MODELVAR(event, g_model.moduleData[EXTERNAL_MODULE].rfProtocol, RF_PROTO_X16, RF_PROTO_LAST);
if (checkIncDec_Ret) {
g_model.moduleData[EXTERNAL_MODULE].channelsStart = 0;
g_model.moduleData[EXTERNAL_MODULE].channelsCount = MAX_EXTERNAL_MODULE_CHANNELS();
}
}
}
break;
#endif
#if defined(PCBSKY9X) && !defined(REVX)
case ITEM_MODEL_EXTRA_MODULE_CHANNELS:
#endif
#if defined(CPUARM)
case ITEM_MODEL_EXTERNAL_MODULE_CHANNELS:
{
uint8_t moduleIdx = CURRENT_MODULE_EDITED(k);
ModuleData & moduleData = g_model.moduleData[moduleIdx];
lcd_putsLeft(y, STR_CHANNELRANGE);
if ((int8_t)PORT_CHANNELS_ROWS(moduleIdx) >= 0) {
lcd_putsAtt(MODEL_SETUP_2ND_COLUMN, y, STR_CH, m_posHorz==0 ? attr : 0);
lcd_outdezAtt(lcdLastPos, y, moduleData.channelsStart+1, LEFT | (m_posHorz==0 ? attr : 0));
lcd_putc(lcdLastPos, y, '-');
lcd_outdezAtt(lcdLastPos + FW+1, y, moduleData.channelsStart+NUM_CHANNELS(moduleIdx), LEFT | (m_posHorz==1 ? attr : 0));
if (attr && (editMode>0 || p1valdiff)) {
switch (m_posHorz) {
case 0:
CHECK_INCDEC_MODELVAR_ZERO(event, moduleData.channelsStart, 32-8-moduleData.channelsCount);
break;
case 1:
CHECK_INCDEC_MODELVAR(event, moduleData.channelsCount, -4, min<int8_t>(MAX_CHANNELS(moduleIdx), 32-8-moduleData.channelsStart));
if ((k == ITEM_MODEL_EXTERNAL_MODULE_CHANNELS && g_model.moduleData[EXTERNAL_MODULE].type == MODULE_TYPE_PPM)) {
SET_DEFAULT_PPM_FRAME_LENGTH(moduleIdx);
}
break;
}
}
}
break;
}
#endif
#if defined(PCBSKY9X) && !defined(REVX)
case ITEM_MODEL_EXTRA_MODULE_BIND:
#endif
#if defined(CPUARM)
case ITEM_MODEL_EXTERNAL_MODULE_BIND:
{
uint8_t moduleIdx = CURRENT_MODULE_EDITED(k);
ModuleData & moduleData = g_model.moduleData[moduleIdx];
if (IS_MODULE_PPM(moduleIdx)) {
lcd_putsLeft(y, STR_PPMFRAME);
lcd_puts(MODEL_SETUP_2ND_COLUMN+3*FW, y, STR_MS);
lcd_outdezAtt(MODEL_SETUP_2ND_COLUMN, y, (int16_t)moduleData.ppmFrameLength*5 + 225, (m_posHorz<=0 ? attr : 0) | PREC1|LEFT);
lcd_putc(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, 'u');
lcd_outdezAtt(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, (moduleData.ppmDelay*50)+300, (CURSOR_ON_LINE() || m_posHorz==1) ? attr : 0);
lcd_putcAtt(MODEL_SETUP_2ND_COLUMN+10*FW, y, moduleData.ppmPulsePol ? '+' : '-', (CURSOR_ON_LINE() || m_posHorz==2) ? attr : 0);
if (attr && (editMode>0 || p1valdiff)) {
switch (m_posHorz) {
case 0:
CHECK_INCDEC_MODELVAR(event, moduleData.ppmFrameLength, -20, 35);
break;
case 1:
CHECK_INCDEC_MODELVAR(event, moduleData.ppmDelay, -4, 10);
break;
case 2:
CHECK_INCDEC_MODELVAR_ZERO(event, moduleData.ppmPulsePol, 1);
break;
}
}
}
else {
horzpos_t l_posHorz = m_posHorz;
coord_t xOffsetBind = MODEL_SETUP_BIND_OFS;
if (IS_MODULE_XJT(moduleIdx) && IS_D8_RX(moduleIdx)) {
xOffsetBind = 0;
lcd_putsLeft(y, INDENT "Receiver");
if (attr) l_posHorz += 1;
}
else {
lcd_putsLeft(y, STR_RXNUM);
}
if (IS_MODULE_XJT(moduleIdx) || IS_MODULE_DSM2(moduleIdx)) {
if (xOffsetBind) lcd_outdezNAtt(MODEL_SETUP_2ND_COLUMN, y, g_model.header.modelId[moduleIdx], (l_posHorz==0 ? attr : 0) | LEADING0|LEFT, 2);
if (attr && l_posHorz==0) {
if (editMode>0 || p1valdiff) {
CHECK_INCDEC_MODELVAR_ZERO(event, g_model.header.modelId[moduleIdx], IS_MODULE_DSM2(moduleIdx) ? 20 : 63);
if (checkIncDec_Ret) {
modelHeaders[g_eeGeneral.currModel].modelId[moduleIdx] = g_model.header.modelId[moduleIdx];
}
}
if (editMode==0 && event==EVT_KEY_BREAK(KEY_ENTER)) {
checkModelIdUnique(g_eeGeneral.currModel, moduleIdx);
}
}
lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+xOffsetBind, y, STR_MODULE_BIND, l_posHorz==1 ? attr : 0);
lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+MODEL_SETUP_RANGE_OFS+xOffsetBind, y, STR_MODULE_RANGE, l_posHorz==2 ? attr : 0);
uint8_t newFlag = 0;
if (attr && l_posHorz>0 && s_editMode>0) {
if (l_posHorz == 1)
newFlag = MODULE_BIND;
else if (l_posHorz == 2) {
newFlag = MODULE_RANGECHECK;
}
}
moduleFlag[moduleIdx] = newFlag;
}
}
break;
}
#endif
#if defined(PCBSKY9X) && defined(REVX)
case ITEM_MODEL_EXTERNAL_MODULE_OUTPUT_TYPE:
{
uint8_t moduleIdx = CURRENT_MODULE_EDITED(k);
ModuleData & moduleData = g_model.moduleData[moduleIdx];
moduleData.ppmOutputType = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_OUTPUT_TYPE, STR_VOUTPUT_TYPE, moduleData.ppmOutputType, 0, 1, attr, event);
break;
}
#endif
#if defined(CPUARM)
case ITEM_MODEL_EXTERNAL_MODULE_FAILSAFE:
{
uint8_t moduleIdx = CURRENT_MODULE_EDITED(k);
ModuleData & moduleData = g_model.moduleData[moduleIdx];
lcd_putsLeft(y, TR_FAILSAFE);
if (IS_MODULE_XJT(moduleIdx)) {
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, STR_VFAILSAFE, moduleData.failsafeMode, m_posHorz==0 ? attr : 0);
if (moduleData.failsafeMode == FAILSAFE_CUSTOM) lcd_putsAtt(MODEL_SETUP_2ND_COLUMN + MODEL_SETUP_SET_FAILSAFE_OFS, y, STR_SET, m_posHorz==1 ? attr : 0);
if (attr) {
if (moduleData.failsafeMode != FAILSAFE_CUSTOM)
m_posHorz = 0;
if (m_posHorz==0) {
if (editMode>0 || p1valdiff) {
CHECK_INCDEC_MODELVAR_ZERO(event, moduleData.failsafeMode, FAILSAFE_LAST);
if (checkIncDec_Ret) SEND_FAILSAFE_NOW(moduleIdx);
}
}
else if (m_posHorz==1) {
s_editMode = 0;
if (moduleData.failsafeMode==FAILSAFE_CUSTOM && event==EVT_KEY_FIRST(KEY_ENTER)) {
g_moduleIdx = moduleIdx;
pushMenu(menuModelFailsafe);
}
}
else {
drawFilledRect(MODEL_SETUP_2ND_COLUMN, y, LCD_W-MODEL_SETUP_2ND_COLUMN-MENUS_SCROLLBAR_WIDTH, 8);
}
}
}
break;
}
#endif
#if !defined(CPUARM)
case ITEM_MODEL_PPM1_PROTOCOL:
lcd_putsLeft(y, NO_INDENT(STR_PROTO));
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, STR_VPROTOS, protocol, m_posHorz<=0 ? attr : 0);
if (IS_PPM_PROTOCOL(protocol)) {
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN+7*FW, y, STR_NCHANNELS, g_model.ppmNCH+2, m_posHorz!=0 ? attr : 0);
}
else if (m_posHorz>0 && attr) {
MOVE_CURSOR_FROM_HERE();
}
if (attr && (editMode>0 || p1valdiff || (!IS_PPM_PROTOCOL(protocol) && !IS_DSM2_PROTOCOL(protocol)))) {
switch (m_posHorz) {
case 0:
CHECK_INCDEC_MODELVAR_ZERO(event, g_model.protocol, PROTO_MAX-1);
break;
case 1:
CHECK_INCDEC_MODELVAR(event, g_model.ppmNCH, -2, 4);
g_model.ppmFrameLength = g_model.ppmNCH * 8;
break;
}
}
break;
#endif
#if 0
case ITEM_MODEL_PPM2_PROTOCOL:
lcd_putsLeft(y, PSTR("Port2"));
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, STR_VPROTOS, 0, 0);
lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+4*FW+3, y, STR_CH, m_posHorz<=0 ? attr : 0);
lcd_outdezAtt(lcdLastPos, y, g_model.moduleData[1].channelsStart+1, LEFT | (m_posHorz<=0 ? attr : 0));
lcd_putc(lcdLastPos, y, '-');
lcd_outdezAtt(lcdLastPos + FW+1, y, g_model.moduleData[1].channelsStart+8+g_model.moduleData[1].channelsCount, LEFT | (m_posHorz!=0 ? attr : 0));
if (attr && (editMode>0 || p1valdiff)) {
switch (m_posHorz) {
case 0:
CHECK_INCDEC_MODELVAR_ZERO(event, g_model.moduleData[1].channelsStart, 32-8-g_model.moduleData[1].channelsCount);
SET_DEFAULT_PPM_FRAME_LENGTH(1);
break;
case 1:
CHECK_INCDEC_MODELVAR(event, g_model.moduleData[1].channelsCount, -4, min<int8_t>(8, 32-8-g_model.moduleData[1].channelsStart));
SET_DEFAULT_PPM_FRAME_LENGTH(1);
break;
}
}
break;
case ITEM_MODEL_PPM2_PARAMS:
lcd_putsLeft(y, STR_PPMFRAME);
lcd_puts(MODEL_SETUP_2ND_COLUMN+3*FW, y, STR_MS);
lcd_outdezAtt(MODEL_SETUP_2ND_COLUMN, y, (int16_t)g_model.moduleData[1].ppmFrameLength*5 + 225, (m_posHorz<=0 ? attr : 0) | PREC1|LEFT);
lcd_putc(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, 'u');
lcd_outdezAtt(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, (g_model.moduleData[1].ppmDelay*50)+300, (m_posHorz < 0 || m_posHorz==1) ? attr : 0);
lcd_putcAtt(MODEL_SETUP_2ND_COLUMN+10*FW, y, g_model.moduleData[1].ppmPulsePol ? '+' : '-', (m_posHorz < 0 || m_posHorz==2) ? attr : 0);
if (attr && (editMode>0 || p1valdiff)) {
switch (m_posHorz) {
case 0:
CHECK_INCDEC_MODELVAR(event, g_model.moduleData[1].ppmFrameLength, -20, 35);
break;
case 1:
CHECK_INCDEC_MODELVAR(event, g_model.moduleData[1].ppmDelay, -4, 10);
break;
case 2:
CHECK_INCDEC_MODELVAR_ZERO(event, g_model.moduleData[1].ppmPulsePol, 1);
break;
}
}
break;
#endif
#if !defined(CPUARM)
case ITEM_MODEL_PPM1_PARAMS:
if (IS_PPM_PROTOCOL(protocol)) {
lcd_putsLeft(y, STR_PPMFRAME);
lcd_puts(MODEL_SETUP_2ND_COLUMN+3*FW, y, STR_MS);
lcd_outdezAtt(MODEL_SETUP_2ND_COLUMN, y, (int16_t)g_model.ppmFrameLength*5 + 225, (m_posHorz<=0 ? attr : 0) | PREC1|LEFT);
lcd_putc(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, 'u');
lcd_outdezAtt(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, (g_model.ppmDelay*50)+300, (CURSOR_ON_LINE() || m_posHorz==1) ? attr : 0);
lcd_putcAtt(MODEL_SETUP_2ND_COLUMN+10*FW, y, g_model.pulsePol ? '+' : '-', (CURSOR_ON_LINE() || m_posHorz==2) ? attr : 0);
if (attr && (editMode>0 || p1valdiff)) {
switch (m_posHorz) {
case 0:
CHECK_INCDEC_MODELVAR(event, g_model.ppmFrameLength, -20, 35);
break;
case 1:
CHECK_INCDEC_MODELVAR(event, g_model.ppmDelay, -4, 10);
break;
case 2:
CHECK_INCDEC_MODELVAR_ZERO(event, g_model.pulsePol, 1);
break;
}
}
}
#if defined(DSM2) || defined(PXX)
else if (IS_DSM2_PROTOCOL(protocol) || IS_PXX_PROTOCOL(protocol)) {
if (attr && m_posHorz > 1) {
REPEAT_LAST_CURSOR_MOVE(); // limit 3 column row to 2 colums (Rx_Num and RANGE fields)
}
lcd_putsLeft(y, STR_RXNUM);
lcd_outdezNAtt(MODEL_SETUP_2ND_COLUMN, y, g_model.header.modelId[0], (m_posHorz<=0 ? attr : 0) | LEADING0|LEFT, 2);
if (attr && (m_posHorz==0 && (editMode>0 || p1valdiff))) {
CHECK_INCDEC_MODELVAR_ZERO(event, g_model.header.modelId[0], 99);
}
#if defined(PXX)
if (protocol == PROTO_PXX) {
lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+4*FW, y, STR_SYNCMENU, m_posHorz!=0 ? attr : 0);
uint8_t newFlag = 0;
if (attr && m_posHorz>0 && editMode>0) {
// send reset code
newFlag = MODULE_BIND;
}
moduleFlag[0] = newFlag;
}
#endif
#if defined(DSM2)
if (IS_DSM2_PROTOCOL(protocol)) {
lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+4*FW, y, STR_MODULE_RANGE, m_posHorz!=0 ? attr : 0);
moduleFlag[0] = (attr && m_posHorz>0 && editMode>0) ? MODULE_RANGECHECK : 0; // [MENU] key toggles range check mode
}
#endif
}
#endif
break;
#endif
}
}
void menuModelLimits(uint8_t event)
{
uint8_t sub = m_posVert - 1;
if (sub < NUM_CHNOUT) {
#if defined(PPM_CENTER_ADJUSTABLE) || defined(PPM_UNIT_US)
lcd_outdezAtt(13*FW, 0, PPM_CH_CENTER(sub)+channelOutputs[sub]/2, 0);
lcd_puts(13*FW, 0, STR_US);
#else
lcd_outdezAtt(13*FW, 0, calcRESXto1000(channelOutputs[sub]), PREC1);
#endif
}
#if defined(CPUARM)
MENU(STR_MENULIMITS, menuTabModel, e_Limits, 1+NUM_CHNOUT+1, {0, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, 0});
#else
MENU(STR_MENULIMITS, menuTabModel, e_Limits, 1+NUM_CHNOUT+1, {0, ITEM_LIMITS_MAXROW, ITEM_LIMITS_MAXROW, ITEM_LIMITS_MAXROW, ITEM_LIMITS_MAXROW, ITEM_LIMITS_MAXROW, ITEM_LIMITS_MAXROW, ITEM_LIMITS_MAXROW, ITEM_LIMITS_MAXROW, ITEM_LIMITS_MAXROW, ITEM_LIMITS_MAXROW, ITEM_LIMITS_MAXROW, ITEM_LIMITS_MAXROW, ITEM_LIMITS_MAXROW, ITEM_LIMITS_MAXROW, ITEM_LIMITS_MAXROW, ITEM_LIMITS_MAXROW, 0});
#endif
if (s_warning_result) {
s_warning_result = 0;
LimitData *ld = limitAddress(sub);
ld->revert = !ld->revert;
eeDirty(EE_MODEL);
}
for (uint8_t i=0; i<LCD_LINES-1; i++) {
coord_t y = MENU_HEADER_HEIGHT + 1 + i*FH;
uint8_t k = i+s_pgOfs;
if (k==NUM_CHNOUT) {
// last line available - add the "copy trim menu" line
uint8_t attr = (sub==NUM_CHNOUT) ? INVERS : 0;
lcd_putsAtt(CENTER_OFS, y, STR_TRIMS2OFFSETS, s_noHi ? 0 : attr);
if (attr) {
s_editMode = 0;
if (event==EVT_KEY_LONG(KEY_ENTER)) {
s_noHi = NO_HI_LEN;
killEvents(event);
moveTrimsToOffsets(); // if highlighted and menu pressed - move trims to offsets
}
}
return;
}
LimitData *ld = limitAddress(k);
#if !defined(PPM_CENTER_ADJUSTABLE)
int16_t v = (ld->revert) ? -LIMIT_OFS(ld) : LIMIT_OFS(ld);
char swVal = '-'; // '-', '<', '>'
if ((channelOutputs[k] - v) > 50) swVal = (ld->revert ? 127 : 126); // Switch to raw inputs? - remove trim!
if ((channelOutputs[k] - v) < -50) swVal = (ld->revert ? 126 : 127);
putsChn(0, y, k+1, 0);
lcd_putc(LIMITS_DIRECTION_POS, y, swVal);
#endif
int8_t limit = (g_model.extendedLimits ? LIMIT_EXT_MAX : 100);
putsChn(0, y, k+1, 0);
for (uint8_t j=0; j<ITEM_LIMITS_COUNT; j++) {
uint8_t attr = ((sub==k && m_posHorz==j) ? ((s_editMode>0) ? BLINK|INVERS : INVERS) : 0);
uint8_t active = (attr && (s_editMode>0 || p1valdiff)) ;
if (active) STICK_SCROLL_DISABLE();
switch(j)
{
case ITEM_LIMITS_OFFSET:
#if defined(PPM_UNIT_US)
lcd_outdezAtt(LIMITS_OFFSET_POS, y, ((int32_t)ld->offset*128) / 25, attr|PREC1);
#else
lcd_outdezAtt(LIMITS_OFFSET_POS, y, ld->offset, attr|PREC1);
#endif
if (active) {
#if defined(CPUARM)
ld->offset = checkIncDec(event, ld->offset, -1000, 1000, EE_MODEL, NULL, stops1000);
#else
ld->offset = checkIncDec(event, ld->offset, -1000, 1000, EE_MODEL|NO_INCDEC_MARKS);
#endif
}
else if (attr && event==EVT_KEY_LONG(KEY_MENU)) {
copySticksToOffset(k);
s_editMode = 0;
}
break;
case ITEM_LIMITS_MIN:
lcd_outdezAtt(LIMITS_MIN_POS, y, MIN_MAX_DISPLAY(ld->min-LIMITS_MIN_MAX_OFFSET), MIN_MAX_ATTR);
#if defined(CPUARM)
if (active) ld->min = LIMITS_MIN_MAX_OFFSET + checkIncDec(event, ld->min-LIMITS_MIN_MAX_OFFSET, -limit, 0, EE_MODEL, NULL, stops1000);
#else
if (active) ld->min = LIMITS_MIN_MAX_OFFSET + checkIncDec(event, ld->min-LIMITS_MIN_MAX_OFFSET, -limit, 0, EE_MODEL);
#endif
break;
case ITEM_LIMITS_MAX:
lcd_outdezAtt(LIMITS_MAX_POS, y, MIN_MAX_DISPLAY(ld->max+LIMITS_MIN_MAX_OFFSET), MIN_MAX_ATTR);
#if defined(CPUARM)
if (active) ld->max = -LIMITS_MIN_MAX_OFFSET + checkIncDec(event, ld->max+LIMITS_MIN_MAX_OFFSET, 0, +limit, EE_MODEL, NULL, stops1000);
#else
if (active) ld->max = -LIMITS_MIN_MAX_OFFSET + checkIncDec(event, ld->max+LIMITS_MIN_MAX_OFFSET, 0, +limit, EE_MODEL);
#endif
break;
case ITEM_LIMITS_DIRECTION:
{
uint8_t revert = ld->revert;
#if defined(PPM_CENTER_ADJUSTABLE)
lcd_putcAtt(LIMITS_REVERT_POS, y, revert ? 127 : 126, attr);
#else
lcd_putsiAtt(LIMITS_REVERT_POS, y, STR_MMMINV, revert, attr);
#endif
if (active) {
uint8_t revert_new = checkIncDecModel(event, revert, 0, 1);
if (checkIncDec_Ret && isThrottleOutput(k)) {
POPUP_CONFIRMATION(STR_INVERT_THR);
}
else {
ld->revert = revert_new;
}
}
break;
}
#if defined(PPM_CENTER_ADJUSTABLE)
case ITEM_LIMITS_PPM_CENTER:
lcd_outdezAtt(LIMITS_PPM_CENTER_POS, y, PPM_CENTER+ld->ppmCenter, attr);
if (active) {
CHECK_INCDEC_MODELVAR(event, ld->ppmCenter, -PPM_CENTER_MAX, +PPM_CENTER_MAX);
}
break;
#endif
#if defined(PPM_LIMITS_SYMETRICAL)
case ITEM_LIMITS_SYMETRICAL:
#if defined(CPUARM)
lcd_putcAtt(LCD_W-FW-MENUS_SCROLLBAR_WIDTH, y, ld->symetrical ? '=' : '\306', attr);
#else
lcd_putcAtt(LCD_W-FW-MENUS_SCROLLBAR_WIDTH, y, ld->symetrical ? '=' : '^', attr);
#endif
if (active) {
CHECK_INCDEC_MODELVAR_ZERO(event, ld->symetrical, 1);
}
break;
#endif
}
}
}
}
