void ExportNative::runScript()
{
QString tempDir = getTempDirectory();
QString logDir = tempDir + "logs";
QString configDir = tempDir + "config";
QString commandline;
// remove existing progress.log if present
if (QFile::exists(logDir + "/progress.log"))
QFile::remove(logDir + "/progress.log");
// remove cancel flag file if present
if (QFile::exists(logDir + "/mythburncancel.lck"))
QFile::remove(logDir + "/mythburncancel.lck");
createConfigFile(configDir + "/mydata.xml");
commandline = "mytharchivehelper -n " + configDir + "/mydata.xml"; // job file
commandline += " > " + logDir + "/progress.log 2>&1 &"; // Logs
int state = system(qPrintable(commandline));
if (state != 0)
{
ShowOkPopup(QObject::tr("It was not possible to create the DVD. "
"An error occured when running the scripts") );
}
else
{
showLogViewer();
}
}
void ExportNative::runScript()
{
QString tempDir = getTempDirectory();
QString logDir = tempDir + "logs";
QString configDir = tempDir + "config";
QString commandline;
// remove existing progress.log if present
if (QFile::exists(logDir + "/progress.log"))
QFile::remove(logDir + "/progress.log");
// remove cancel flag file if present
if (QFile::exists(logDir + "/mythburncancel.lck"))
QFile::remove(logDir + "/mythburncancel.lck");
createConfigFile(configDir + "/mydata.xml");
commandline = "mytharchivehelper --nativearchive --outfile " + configDir +
"/mydata.xml"; // job file
commandline += logPropagateArgs;
if (!logPropagateQuiet())
commandline += " --quiet";
commandline += " > " + logDir + "/progress.log 2>&1 &"; // Logs
uint flags = kMSRunBackground | kMSDontBlockInputDevs |
kMSDontDisableDrawing;
uint retval = myth_system(commandline, flags);
if (retval != GENERIC_EXIT_RUNNING && retval != GENERIC_EXIT_OK)
{
ShowOkPopup(QObject::tr("It was not possible to create the DVD. "
"An error occured when running the scripts") );
return;
}
showLogViewer();
}
bool ConfigXML::createXML()
{
CnMn = moduleConf->getCompanyName()
+ "_" + moduleConf->getModuleName();
bool res1 = createDeclFile();
bool res2 = createConfigFile();
return res1 && res2;
}
/**
* Generates a configuration file to be used in testing.
* @param MCGPU_path The path to MCGPU's root directory.
* @param fileName The name of the configuration file to generate.
* @param primaryAtomIndexString The entry for the Primary Atom Index line of
* the config file.
*/
void createT3pDimConfigFile(std::string MCGPU, std::string fileName,
std::string primaryAtomIndexString) {
ConfigFileData settings = ConfigFileData(
26.15, 26.15, 26.15, 298.15, .12, 100000, 256,
"resources/bossFiles/oplsaa.par",
"test/unittests/MultipleSolvents/t3pdimTests/t3pdim.z",
"test/unittests/MultipleSolvents/t3pdimTests",
11.0, 12.0, 12345);
createConfigFile(MCGPU, fileName, primaryAtomIndexString, settings);
}
void Dialog::okClicked()
{
long pidNumber;
if ((0 < (pidNumber = verifyPidFile())) && !verifyFields())
{
createConfigFile();
sendSignal((pid_t) pidNumber);
}
}
void ImportFile::OKPressed()
{
QString configFile = getTempDirectory() + "config/importjob.xml";
createConfigFile(configFile);
QString commandline;
QString tempDir = gCoreContext->GetSetting("MythArchiveTempDir", "");
if (tempDir == "")
return;
if (!tempDir.endsWith("/"))
tempDir += "/";
QString logDir = tempDir + "logs";
// remove any existing logs
myth_system("rm -f " + logDir + "/*.log");
commandline = "mytharchivehelper -v none,jobqueue --logpath " + logDir + " --importfile "
"--infile \"" + configFile + "\"";
uint flags = kMSRunBackground | kMSDontBlockInputDevs |
kMSDontDisableDrawing;
uint retval = myth_system(commandline, flags);
if (retval != GENERIC_EXIT_RUNNING && retval != GENERIC_EXIT_OK)
{
ShowOkPopup(tr("It was not possible to import the file. "
" An error occured when running 'mytharchivehelper'") );
return;
}
showLogViewer();
Close();
}
/**
* Generates a configuration file to be used in testing.
* @param MCGPU_path The path to MCGPU's root directory.
* @param fileName The name of the configuration file to generate.
* @param primaryAtomIndexString The entry for the Primary Atom Index line of the config file.
*/
void createIndoleConfigFile(std::string MCGPU, std::string fileName, std::string primaryAtomIndexString) {
ConfigFileData settings = ConfigFileData(35.36, 35.36, 35.36, 298.15, .12, 40000, 267, "resources/bossFiles/oplsaa.par",
"test/unittests/Integration/IndoleTest/indole.z", "test/unittests/Integration/IndoleTest", 12.0,
12.0, 12345);
createConfigFile(MCGPU, fileName, primaryAtomIndexString, settings);
}
// procédure pour "activer" le device, en l'occurence : mettre les paramètres de base qui nous intéressent nous :
static void ZytActivateDevice(int fd)
{
int fdConf,val;
char param[100],res[10];
//paramètres par défaut : (également utilisés pour créer le fichier de configuration par la suite, s'il n'existe pas)
zytConf.dimDalleX = 1024;
zytConf.dimDalleY = 768;
zytConf.seuil = 10;
zytConf.epaisseur = 1;
zytConf.attenteMultiClic = 300;
// par défaut on ne garde que le premier appui d'une série : la "souris" ne bougera pas entre un appui et un relachement
zytConf.mode=NO_DRAG_DROP;
zytConf.frameRateAveraging=3;
zytConf.nbClignToPress=5; // le nombre d'appuis successifs pour comprendre un appui après un clignotement
zytConf.debug=NO_DEBUG;
// récupération des paramètres choisis, et création du fichier si besoin :
fdConf = open(ZYT_CONF_FILE,O_RDWR);
if(fdConf==-1){
D_INFO("ZYT, le fichier %s de configuration de la dalle zytronic n'existe pas, creation en cours...\n",ZYT_CONF_FILE);
createConfigFile(&fdConf);
D_INFO("ZYT, ...creation de %s finie.\n",ZYT_CONF_FILE);
}else{
D_INFO("ZYT, le fichier %s de configuration de la dalle zytronic existe.\n",ZYT_CONF_FILE);
}
// puis, on charge les valeurs de configuration, en gardant les valeurs par défaut pour les paramètres non précisés :
lseek(fdConf,0,SEEK_SET); // on retourne au début du fichier (au cas où on vient de le créé)
while(nextConf(fdConf,param,res)!=ZYT_END_OF_CONF_FILE){
val = atoi(res);
D_INFO("parametre : %s = %d\n",param,val); //debug
if(strcmp(param,ZYT_CONF_DIM_DALLE_X)==0){
zytConf.dimDalleX=val;
}else if(strcmp(param,ZYT_CONF_DIM_DALLE_Y)==0){
zytConf.dimDalleY=val;
}else if(strcmp(param,ZYT_CONF_SEUIL)==0){
zytConf.seuil=val;
}else if(strcmp(param,ZYT_CONF_EPAISSEUR)==0){
zytConf.epaisseur=val;
}else if(strcmp(param,ZYT_CONF_ATTENTE_MULTI_CLIC)==0){
zytConf.attenteMultiClic=val*1000; //on passe les millisecondes en microsecondes
}else if(strcmp(param,ZYT_CONF_MODE)==0){
zytConf.mode=val;
}else if(strcmp(param,ZYT_CONF_FRAME_AVERAGING)==0){
zytConf.frameRateAveraging=val;
}else if(strcmp(param,ZYT_CONF_NB_CLIGN_TO_PRESS)==0){
zytConf.nbClignToPress=val;
}else if(strcmp(param,ZYT_CONF_DEBUG)==0){
zytConf.debug=val;
}else {
D_INFO("ZYT, parametre non reconnu : %s\n",param);
D_INFO("ZYT, veuillez verifier le fichier de configuration %s!\n",ZYT_CONF_FILE);
}
}
close(fdConf);
// envoi des paramètres du controleur pour utilisation normale :
//packet[0]=ZYT_INIT_FW_RESET; // permet de "mieux" initialiser le controleur, utile? (long : ~5sec)
//ZytSendPacket(fd,packet,1); // attention, commande inutilisable telle qu'elle, car elle coupe la liaison
// et donc empêche les commandes suivantes...
// (ici en l'occurence tout le paramètrage qui suit...) !!!
packet[0]=ZYT_RESTORE_FACTORY_DEFAULT_SETTINGS;
ZytSendPacket(fd,packet,1);
packet[0]=ZYT_SET_FRAME_AVERAGING + zytConf.frameRateAveraging;
ZytSendPacket(fd,packet,1);
packet[0]=ZYT_DISABLE_CONTINUOUS_RAW_SENSOR_DATA;
ZytSendPacket(fd,packet,1);
packet[0]=ZYT_SET_TOUCH_THRESHOLD + zytConf.seuil;
ZytSendPacket(fd,packet,1);
packet[0]=ZYT_SET_GLASS_THICKNESS + zytConf.epaisseur;
ZytSendPacket(fd,packet,1);
packet[0]=ZYT_ENABLE_CONTROLLER;
ZytSendPacket(fd,packet,1);
packet[0]=ZYT_FORCE_EQUALISATION;
ZytSendPacket(fd,packet,1);
packet[0]=ZYT_XY_TOUCH_MESSAGE_MODE;
ZytSendPacket(fd,packet,1);
}
bool DTSettings::load()
{
delete mSettings;
createConfigFile();
return true;
}
int Awstats::prepareAwstatsEnv( const HttpVHost * pVHost )
{
uid_t uid = HttpGlobals::s_uid;
gid_t gid = HttpGlobals::s_gid;
struct stat st;
char achBuf[1024];
if ( pVHost->getRootContext().getSetUidMode() == UID_DOCROOT )
{
uid = pVHost->getUid();
gid = pVHost->getGid();
}
// create working directory if need
if ( nio_stat( m_sWorkingDir.c_str(), &st ) == -1 )
{
if ( mkdir( m_sWorkingDir.c_str(), 0755 ) == -1 )
{
LOG_ERR(( "Can not create awstats working directory[%s]: %s",
m_sWorkingDir.c_str(), strerror( errno ) ));
return -1;
}
}
chown( m_sWorkingDir.c_str(), uid, gid );
if ( m_iMode == AWS_STATIC )
{
safe_snprintf( achBuf, 1024, "%s/html", m_sWorkingDir.c_str() );
if ( nio_stat( achBuf, &st ) == -1 )
{
if ( mkdir( achBuf, 0755 ) == -1 )
{
LOG_ERR(( "Can not create awstats working directory[%s]: %s",
achBuf, strerror( errno ) ));
return -1;
}
}
chown( achBuf, uid, gid );
}
// create data directory if need
safe_snprintf( achBuf, 1024, "%s/data", m_sWorkingDir.c_str() );
mkdir( achBuf, 0755 );
chown( achBuf, uid, gid );
// create conf directory if need
safe_snprintf( achBuf, 1024, "%s/conf", m_sWorkingDir.c_str() );
mkdir( achBuf, 0755 );
chown( achBuf, uid, gid );
// copy awstats.model.conf to conf/ directory if does not exist
safe_snprintf( achBuf, 1024, "%s/conf/awstats.model.conf", m_sWorkingDir.c_str() );
if ( nio_stat( achBuf, &st ) == -1 )
{
char achTmp[1024];
const char * pChroot = "";
if (HttpGlobals::s_psChroot)
pChroot = HttpGlobals::s_psChroot->c_str();
safe_snprintf( achTmp, 1024, "%s%s/add-ons/awstats/wwwroot/cgi-bin/awstats.model.conf",
pChroot, HttpGlobals::s_pServerRoot);
if ( copyFile( achTmp, achBuf ) )
{
return -1;
}
chown( achBuf, uid, gid );
}
if ( createConfigFile( achBuf, pVHost ) == -1 )
return -1;
chown( achBuf, uid, gid );
return 0;
}
int Awstats::prepareAwstatsEnv(const HttpVHost *pVHost)
{
ServerProcessConfig &procConfig = ServerProcessConfig::getInstance();
uid_t uid = procConfig.getUid();
gid_t gid = procConfig.getGid();
struct stat st;
char achBuf[1024];
if (pVHost->getRootContext().getSetUidMode() == UID_DOCROOT)
{
uid = pVHost->getUid();
gid = pVHost->getGid();
}
// create working directory if need
if (ls_fio_stat(m_sWorkingDir.c_str(), &st) == -1)
{
if (mkdir(m_sWorkingDir.c_str(), 0755) == -1)
{
LS_ERROR("Can not create awstats working directory[%s]: %s",
m_sWorkingDir.c_str(), strerror(errno));
return LS_FAIL;
}
}
chown(m_sWorkingDir.c_str(), uid, gid);
if (m_iMode == AWS_STATIC)
{
ls_snprintf(achBuf, 1024, "%s/html", m_sWorkingDir.c_str());
if (ls_fio_stat(achBuf, &st) == -1)
{
if (mkdir(achBuf, 0755) == -1)
{
LS_ERROR("Can not create awstats working directory[%s]: %s",
achBuf, strerror(errno));
return LS_FAIL;
}
}
chown(achBuf, uid, gid);
}
// create data directory if need
ls_snprintf(achBuf, 1024, "%s/data", m_sWorkingDir.c_str());
mkdir(achBuf, 0755);
chown(achBuf, uid, gid);
// create conf directory if need
ls_snprintf(achBuf, 1024, "%s/conf", m_sWorkingDir.c_str());
mkdir(achBuf, 0755);
chown(achBuf, uid, gid);
// copy awstats.model.conf to conf/ directory if does not exist
ls_snprintf(achBuf, 1024, "%s/conf/awstats.model.conf",
m_sWorkingDir.c_str());
if (ls_fio_stat(achBuf, &st) == -1)
{
char achTmp[1024];
const char *pChroot = "";
if (procConfig.getChroot() != NULL)
pChroot = procConfig.getChroot()->c_str();
ls_snprintf(achTmp, 1024,
"%s%s/add-ons/awstats/wwwroot/cgi-bin/awstats.model.conf",
pChroot, MainServerConfig::getInstance().getServerRoot());
if (copyFile(achTmp, achBuf))
return LS_FAIL;
chown(achBuf, uid, gid);
}
if (createConfigFile(achBuf, pVHost) == -1)
return LS_FAIL;
chown(achBuf, uid, gid);
return 0;
}
