void GLSLShader::updateCurrentMatrices()
{
glm::mat4 model(currentModelView());
model *= currentTransfo();
currentPMV() = currentProjection() * model;
currentNormalMatrix() = glm::inverseTranspose(model);
for(std::set< std::pair<void*, GLSLShader*> >::iterator it = m_registeredShaders->begin(); it != m_registeredShaders->end(); ++it)
it->second->updateMatrices(currentProjection(), model, currentPMV(), currentNormalMatrix());
}
void GLSLShader::updateAllFromGLMatrices()
{
GLdouble modelview[16];
GLdouble projection[16];
glGetDoublev( GL_MODELVIEW_MATRIX, modelview );
glGetDoublev( GL_PROJECTION_MATRIX, projection );
glm::mat4& model = currentModelView();
glm::mat4& proj = currentProjection();
for (unsigned int i = 0; i < 4; ++i)
{
for (unsigned int j = 0; j < 4; ++j)
{
proj[i][j] = float(projection[4*i+j]);
model[i][j] = float(modelview[4*i+j]);
}
}
model = currentTransfo() * model;
currentPMV() = proj * model;
currentNormalMatrix() = glm::inverseTranspose(model);
for(std::set< std::pair<void*, GLSLShader*> >::iterator it = m_registeredShaders->begin(); it != m_registeredShaders->end(); ++it)
it->second->updateMatrices(proj, model, currentPMV(), currentNormalMatrix());
}
int ViewportParams::polarity() const
{
// For mercator this just gives the extreme latitudes
// instead of the actual poles but it works fine as well:
GeoDataCoordinates northPole( 0.0, +currentProjection()->maxLat() );
GeoDataCoordinates southPole( 0.0, -currentProjection()->maxLat() );
bool globeHidesN, globeHidesS;
qreal x;
qreal yN, yS;
currentProjection()->screenCoordinates( northPole, this,
x, yN, globeHidesN );
currentProjection()->screenCoordinates( southPole, this,
x, yS, globeHidesS );
int polarity = 0;
// case of the flat map:
if ( !globeHidesN && !globeHidesS ) {
if ( yN < yS ) {
polarity = +1;
}
if ( yS < yN ) {
polarity = -1;
}
}
else {
if ( !globeHidesN && yN < height() / 2 ) {
polarity = +1;
}
if ( !globeHidesN && yN > height() / 2 ) {
polarity = -1;
}
if ( !globeHidesS && yS > height() / 2 ) {
polarity = +1;
}
if ( !globeHidesS && yS < height() / 2 ) {
polarity = -1;
}
}
return polarity;
}
void milxQtDiffusionTensorModel::colourByDirection()
{
vtkSmartPointer<vtkPolyData> currentMesh = model.Result();
typedef double projectionType;
///Determine colours based on axes directions
vtkSmartPointer<vtkUnsignedCharArray> scalars = vtkSmartPointer<vtkUnsignedCharArray>::New();
scalars->SetNumberOfComponents(3);
scalars->SetNumberOfTuples(currentMesh->GetNumberOfPoints());
scalars->SetName("Fibre Colours");
scalars->FillComponent(0, 0);
scalars->FillComponent(1, 0);
scalars->FillComponent(2, 0);
vtkSmartPointer<vtkFloatArray> projections = vtkSmartPointer<vtkFloatArray>::New();
projections->SetNumberOfComponents(3);
projections->SetNumberOfTuples(currentMesh->GetNumberOfPoints());
projections->SetName("Fibre Projections");
projections->FillComponent(0, 0.0);
projections->FillComponent(1, 0.0);
projections->FillComponent(2, 0.0);
emit working(-1);
if(currentMesh->GetNumberOfLines() == 0)
{
printInfo("No lines in model. Computing colours for mesh.");
///Use the dot product in each axis
for(size_t j = 0; j < 3; j ++)
{
projectionType axis[3] = {0.0, 0.0, 0.0};
axis[j] = 1.0;
cout << "Computing toward axis " << j << endl;
///Colour based on each of the gradient values in that direction
for(vtkIdType k = 0; k < currentMesh->GetNumberOfPoints(); k ++)
{
coordinate currentProjection(projections->GetTuple3(k)), position(currentMesh->GetPoint(k));
projectionType projection = vtkMath::Dot(axis, position.data_block()); //project to axis being done,
currentProjection[j] = projection; //projection in each direction
projections->SetTuple3(k, currentProjection[0], currentProjection[1], currentProjection[2]);
}
}
///Colour based on each of the gradient values in that direction
for(vtkIdType k = 0; k < currentMesh->GetNumberOfPoints(); k ++)
{
coordinate currentProjection(projections->GetTuple3(k));
coordinate currentProjSquared = element_product(currentProjection, currentProjection);
projectionType maxProjection = currentProjSquared.max_value();
currentProjSquared /= maxProjection;
unsigned char colourOfPoint[3] = {0, 0, 0};
colourOfPoint[0] = static_cast<unsigned char>( currentProjSquared[0]*255.0 );
colourOfPoint[1] = static_cast<unsigned char>( currentProjSquared[1]*255.0 );
colourOfPoint[2] = static_cast<unsigned char>( currentProjSquared[2]*255.0 );
scalars->SetTupleValue(k, colourOfPoint);
}
currentMesh->GetPointData()->SetVectors(projections);
currentMesh->GetPointData()->SetScalars(scalars);
}
else
{
printInfo("Re-colouring lines by axes directions");
//Ensure lines done properly so can colour appropriately
currentMesh->GetLines()->InitTraversal();
vtkSmartPointer<vtkPoints> points = vtkSmartPointer<vtkPoints>::New();
vtkSmartPointer<vtkIdList> idList = vtkSmartPointer<vtkIdList>::New();
std::vector<vtkIdType> trackLengths;
for(vtkIdType j = 0; j < currentMesh->GetNumberOfLines(); j ++)
{
currentMesh->GetLines()->GetNextCell(idList);
trackLengths.push_back(idList->GetNumberOfIds());
for(vtkIdType pointId = 0; pointId < idList->GetNumberOfIds(); pointId ++)
{
// std::cout << idList->GetId(pointId) << " ";
double position[3];
currentMesh->GetPoint(idList->GetId(pointId), position);
points->InsertNextPoint(position);
}
}
//Re-stitch lines together
vtkIdType step = 0;
vtkSmartPointer<vtkCellArray> lines = vtkSmartPointer<vtkCellArray>::New();
for(size_t j = 0; j < trackLengths.size(); j ++)
{
for(vtkIdType k = step; k < trackLengths[j]-1; k ++)
{
vtkSmartPointer<vtkLine> line = vtkSmartPointer<vtkLine>::New();
line->GetPointIds()->SetId(0, k);
line->GetPointIds()->SetId(1, k+1);
lines->InsertNextCell(line);
}
qDebug() << trackLengths[j] << endl;
step += trackLengths[j];
}
vtkSmartPointer<vtkPolyData> linesPolyData = vtkSmartPointer<vtkPolyData>::New();
//Add the points to the dataset
linesPolyData->SetPoints(points);
//Add the lines to the dataset
linesPolyData->SetLines(lines);
linesPolyData->Modified();
model.SetInput(linesPolyData);
}
emit done(-1);
generateModel();
}