void
pcieb_plat_initchild(dev_info_t *child)
{
struct ddi_parent_private_data *pdptr;
if (ddi_getprop(DDI_DEV_T_NONE, child, DDI_PROP_DONTPASS, "interrupts",
-1) != -1) {
pdptr = kmem_zalloc((sizeof (struct ddi_parent_private_data) +
sizeof (struct intrspec)), KM_SLEEP);
pdptr->par_intr = (struct intrspec *)(pdptr + 1);
pdptr->par_nintr = 1;
ddi_set_parent_data(child, pdptr);
} else
ddi_set_parent_data(child, NULL);
}
static void
ppb_removechild(dev_info_t *dip)
{
struct ddi_parent_private_data *pdptr;
ppb_devstate_t *ppb;
ppb = (ppb_devstate_t *)ddi_get_soft_state(ppb_state,
ddi_get_instance(ddi_get_parent(dip)));
if (ppb->parent_bus == PCIE_PCIECAP_DEV_TYPE_PCIE_DEV) {
pcie_fini_dom(dip);
pcie_fini_cfghdl(dip);
} else if ((pdptr = ddi_get_parent_data(dip)) != NULL) {
kmem_free(pdptr, (sizeof (*pdptr) + sizeof (struct intrspec)));
ddi_set_parent_data(dip, NULL);
}
ddi_set_name_addr(dip, NULL);
/*
* Strip the node to properly convert it back to prototype form
*/
ddi_remove_minor_node(dip, NULL);
impl_rem_dev_props(dip);
}
void
pcieb_plat_uninitchild(dev_info_t *child)
{
struct ddi_parent_private_data *pdptr;
if ((pdptr = ddi_get_parent_data(child)) != NULL)
kmem_free(pdptr, (sizeof (*pdptr) + sizeof (struct intrspec)));
ddi_set_parent_data(child, NULL);
}
static int
name_child(dev_info_t *child, char *name, int namelen)
{
char *unitaddr;
ddi_set_parent_data(child, NULL);
name[0] = '\0';
if (ddi_prop_lookup_string(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS,
ACPIDEV_PROP_NAME_UNIT_ADDR, &unitaddr) == DDI_SUCCESS) {
(void) strlcpy(name, unitaddr, namelen);
ddi_prop_free(unitaddr);
} else {
ACPINEX_DEBUG(CE_NOTE, "!acpinex: failed to lookup child "
"unit-address prop for %p.", (void *)child);
}
return (DDI_SUCCESS);
}
static int
pci_removechild(dev_info_t *dip)
{
struct ddi_parent_private_data *pdptr;
if ((pdptr = ddi_get_parent_data(dip)) != NULL) {
kmem_free(pdptr, (sizeof (*pdptr) + sizeof (struct intrspec)));
ddi_set_parent_data(dip, NULL);
}
ddi_set_name_addr(dip, NULL);
/*
* Strip the node to properly convert it back to prototype form
*/
ddi_remove_minor_node(dip, NULL);
impl_rem_dev_props(dip);
return (DDI_SUCCESS);
}
/*
* control ops entry point:
*
* Requests handled completely:
* DDI_CTLOPS_INITCHILD
* DDI_CTLOPS_UNINITCHILD
* DDI_CTLOPS_REPORTDEV
* DDI_CTLOPS_REGSIZE
* DDI_CTLOPS_NREGS
*
* All others passed to parent.
*/
static int
acebus_ctlops(dev_info_t *dip, dev_info_t *rdip,
ddi_ctl_enum_t op, void *arg, void *result)
{
#ifdef DEBUG
ebus_devstate_t *ebus_p = get_acebus_soft_state(ddi_get_instance(dip));
#endif
ebus_regspec_t *ebus_rp;
int32_t reglen;
int i, n;
char name[10];
switch (op) {
case DDI_CTLOPS_INITCHILD: {
dev_info_t *child = (dev_info_t *)arg;
/*
* Set the address portion of the node name based on the
* address/offset.
*/
DBG2(D_CTLOPS, ebus_p, "DDI_CTLOPS_INITCHILD: rdip=%s%d\n",
ddi_get_name(child), ddi_get_instance(child));
if (ddi_getlongprop(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS,
"reg", (caddr_t)&ebus_rp, ®len) != DDI_SUCCESS) {
DBG(D_CTLOPS, ebus_p, "can't get reg property\n");
return (DDI_FAILURE);
}
(void) sprintf(name, "%x,%x", ebus_rp->addr_hi,
ebus_rp->addr_low);
ddi_set_name_addr(child, name);
kmem_free((caddr_t)ebus_rp, reglen);
ddi_set_parent_data(child, NULL);
return (DDI_SUCCESS);
}
case DDI_CTLOPS_UNINITCHILD:
DBG2(D_CTLOPS, ebus_p, "DDI_CTLOPS_UNINITCHILD: rdip=%s%d\n",
ddi_get_name((dev_info_t *)arg),
ddi_get_instance((dev_info_t *)arg));
ddi_set_name_addr((dev_info_t *)arg, NULL);
ddi_remove_minor_node((dev_info_t *)arg, NULL);
impl_rem_dev_props((dev_info_t *)arg);
return (DDI_SUCCESS);
case DDI_CTLOPS_REPORTDEV:
DBG2(D_CTLOPS, ebus_p, "DDI_CTLOPS_REPORTDEV: rdip=%s%d\n",
ddi_get_name(rdip), ddi_get_instance(rdip));
cmn_err(CE_CONT, "?%s%d at %s%d: offset %s\n",
ddi_driver_name(rdip), ddi_get_instance(rdip),
ddi_driver_name(dip), ddi_get_instance(dip),
ddi_get_name_addr(rdip));
return (DDI_SUCCESS);
case DDI_CTLOPS_REGSIZE:
DBG2(D_CTLOPS, ebus_p, "DDI_CTLOPS_REGSIZE: rdip=%s%d\n",
ddi_get_name(rdip), ddi_get_instance(rdip));
if (getprop(rdip, "reg", &ebus_rp, &i) != DDI_SUCCESS) {
DBG(D_CTLOPS, ebus_p, "can't get reg property\n");
return (DDI_FAILURE);
}
n = i / sizeof (ebus_regspec_t);
if (*(int *)arg < 0 || *(int *)arg >= n) {
DBG(D_MAP, ebus_p, "rnumber out of range\n");
kmem_free((caddr_t)ebus_rp, i);
return (DDI_FAILURE);
}
*((off_t *)result) = ebus_rp[*(int *)arg].size;
kmem_free((caddr_t)ebus_rp, i);
return (DDI_SUCCESS);
case DDI_CTLOPS_NREGS:
DBG2(D_CTLOPS, ebus_p, "DDI_CTLOPS_NREGS: rdip=%s%d\n",
ddi_get_name(rdip), ddi_get_instance(rdip));
if (getprop(rdip, "reg", &ebus_rp, &i) != DDI_SUCCESS) {
DBG(D_CTLOPS, ebus_p, "can't get reg property\n");
return (DDI_FAILURE);
}
*((uint_t *)result) = i / sizeof (ebus_regspec_t);
kmem_free((caddr_t)ebus_rp, i);
return (DDI_SUCCESS);
}
/*
* Now pass the request up to our parent.
*/
DBG2(D_CTLOPS, ebus_p, "passing request to parent: rdip=%s%d\n",
ddi_get_name(rdip), ddi_get_instance(rdip));
return (ddi_ctlops(dip, rdip, op, arg, result));
}
static int
cnex_ctl(dev_info_t *dip, dev_info_t *rdip, ddi_ctl_enum_t ctlop,
void *arg, void *result)
{
char name[MAXNAMELEN];
uint32_t reglen;
int *cnex_regspec;
switch (ctlop) {
case DDI_CTLOPS_REPORTDEV:
if (rdip == NULL)
return (DDI_FAILURE);
cmn_err(CE_CONT, "?channel-device: %s%d\n",
ddi_driver_name(rdip), ddi_get_instance(rdip));
return (DDI_SUCCESS);
case DDI_CTLOPS_INITCHILD:
{
dev_info_t *child = (dev_info_t *)arg;
if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, child,
DDI_PROP_DONTPASS, "reg",
&cnex_regspec, ®len) != DDI_SUCCESS) {
return (DDI_FAILURE);
}
(void) snprintf(name, sizeof (name), "%x", *cnex_regspec);
ddi_set_name_addr(child, name);
ddi_set_parent_data(child, NULL);
ddi_prop_free(cnex_regspec);
return (DDI_SUCCESS);
}
case DDI_CTLOPS_UNINITCHILD:
{
dev_info_t *child = (dev_info_t *)arg;
NDI_CONFIG_DEBUG((CE_NOTE,
"DDI_CTLOPS_UNINITCHILD(%s, instance=%d)",
ddi_driver_name(child), DEVI(child)->devi_instance));
ddi_set_name_addr(child, NULL);
return (DDI_SUCCESS);
}
case DDI_CTLOPS_DMAPMAPC:
case DDI_CTLOPS_REPORTINT:
case DDI_CTLOPS_REGSIZE:
case DDI_CTLOPS_NREGS:
case DDI_CTLOPS_SIDDEV:
case DDI_CTLOPS_SLAVEONLY:
case DDI_CTLOPS_AFFINITY:
case DDI_CTLOPS_POKE:
case DDI_CTLOPS_PEEK:
/*
* These ops correspond to functions that "shouldn't" be called
* by a channel-device driver. So we whine when we're called.
*/
cmn_err(CE_WARN, "%s%d: invalid op (%d) from %s%d\n",
ddi_driver_name(dip), ddi_get_instance(dip), ctlop,
ddi_driver_name(rdip), ddi_get_instance(rdip));
return (DDI_FAILURE);
case DDI_CTLOPS_ATTACH:
case DDI_CTLOPS_BTOP:
case DDI_CTLOPS_BTOPR:
case DDI_CTLOPS_DETACH:
case DDI_CTLOPS_DVMAPAGESIZE:
case DDI_CTLOPS_IOMIN:
case DDI_CTLOPS_POWER:
case DDI_CTLOPS_PTOB:
default:
/*
* Everything else (e.g. PTOB/BTOP/BTOPR requests) we pass up
*/
return (ddi_ctlops(dip, rdip, ctlop, arg, result));
}
}
static int
ppb_initchild(dev_info_t *child)
{
char name[MAXNAMELEN];
ddi_acc_handle_t config_handle;
ushort_t command_preserve, command;
uint_t n;
ushort_t bcr;
uchar_t header_type;
uchar_t min_gnt, latency_timer;
ppb_devstate_t *ppb;
/*
* Name the child
*/
if (ppb_name_child(child, name, MAXNAMELEN) != DDI_SUCCESS)
return (DDI_FAILURE);
ddi_set_name_addr(child, name);
ddi_set_parent_data(child, NULL);
/*
* Pseudo nodes indicate a prototype node with per-instance
* properties to be merged into the real h/w device node.
* The interpretation of the unit-address is DD[,F]
* where DD is the device id and F is the function.
*/
if (ndi_dev_is_persistent_node(child) == 0) {
extern int pci_allow_pseudo_children;
/*
* Try to merge the properties from this prototype
* node into real h/w nodes.
*/
if (ndi_merge_node(child, ppb_name_child) == DDI_SUCCESS) {
/*
* Merged ok - return failure to remove the node.
*/
ppb_removechild(child);
return (DDI_FAILURE);
}
/* workaround for ddivs to run under PCI */
if (pci_allow_pseudo_children)
return (DDI_SUCCESS);
/*
* The child was not merged into a h/w node,
* but there's not much we can do with it other
* than return failure to cause the node to be removed.
*/
cmn_err(CE_WARN, "!%s@%s: %s.conf properties not merged",
ddi_driver_name(child), ddi_get_name_addr(child),
ddi_driver_name(child));
ppb_removechild(child);
return (DDI_NOT_WELL_FORMED);
}
ppb = (ppb_devstate_t *)ddi_get_soft_state(ppb_state,
ddi_get_instance(ddi_get_parent(child)));
ddi_set_parent_data(child, NULL);
/*
* If hardware is PM capable, set up the power info structure.
* This also ensures the the bus will not be off (0MHz) otherwise
* system panics during a bus access.
*/
if (PM_CAPABLE(ppb->ppb_pwr_p)) {
/*
* Create a pwr_info struct for child. Bus will be
* at full speed after creating info.
*/
pci_pwr_create_info(ppb->ppb_pwr_p, child);
#ifdef DEBUG
ASSERT(ppb->ppb_pwr_p->current_lvl == PM_LEVEL_B0);
#endif
}
/*
* If configuration registers were previously saved by
* child (before it entered D3), then let the child do the
* restore to set up the config regs as it'll first need to
* power the device out of D3.
*/
if (ddi_prop_exists(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS,
"config-regs-saved-by-child") == 1) {
DEBUG2(DBG_PWR, ddi_get_parent(child),
"INITCHILD: config regs to be restored by child"
" for %s@%s\n", ddi_node_name(child),
ddi_get_name_addr(child));
return (DDI_SUCCESS);
}
DEBUG2(DBG_PWR, ddi_get_parent(child),
"INITCHILD: config regs setup for %s@%s\n",
ddi_node_name(child), ddi_get_name_addr(child));
if (pci_config_setup(child, &config_handle) != DDI_SUCCESS) {
if (PM_CAPABLE(ppb->ppb_pwr_p)) {
pci_pwr_rm_info(ppb->ppb_pwr_p, child);
}
return (DDI_FAILURE);
}
/*
* Determine the configuration header type.
*/
header_type = pci_config_get8(config_handle, PCI_CONF_HEADER);
/*
* Support for the "command-preserve" property.
*/
command_preserve = ddi_prop_get_int(DDI_DEV_T_ANY, child,
DDI_PROP_DONTPASS, "command-preserve", 0);
command = pci_config_get16(config_handle, PCI_CONF_COMM);
command &= (command_preserve | PCI_COMM_BACK2BACK_ENAB);
command |= (ppb_command_default & ~command_preserve);
pci_config_put16(config_handle, PCI_CONF_COMM, command);
/*
* If the device has a bus control register then program it
* based on the settings in the command register.
*/
if ((header_type & PCI_HEADER_TYPE_M) == PCI_HEADER_ONE) {
bcr = pci_config_get8(config_handle, PCI_BCNF_BCNTRL);
if (ppb_command_default & PCI_COMM_PARITY_DETECT)
bcr |= PCI_BCNF_BCNTRL_PARITY_ENABLE;
if (ppb_command_default & PCI_COMM_SERR_ENABLE)
bcr |= PCI_BCNF_BCNTRL_SERR_ENABLE;
bcr |= PCI_BCNF_BCNTRL_MAST_AB_MODE;
pci_config_put8(config_handle, PCI_BCNF_BCNTRL, bcr);
}
/*
* Initialize cache-line-size configuration register if needed.
*/
if (ppb_set_cache_line_size_register &&
ddi_getprop(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS,
"cache-line-size", 0) == 0) {
pci_config_put8(config_handle, PCI_CONF_CACHE_LINESZ,
ppb->ppb_cache_line_size);
n = pci_config_get8(config_handle, PCI_CONF_CACHE_LINESZ);
if (n != 0) {
(void) ndi_prop_update_int(DDI_DEV_T_NONE, child,
"cache-line-size", n);
}
}
/*
* Initialize latency timer configuration registers if needed.
*/
if (ppb_set_latency_timer_register &&
ddi_getprop(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS,
"latency-timer", 0) == 0) {
if ((header_type & PCI_HEADER_TYPE_M) == PCI_HEADER_ONE) {
latency_timer = ppb->ppb_latency_timer;
pci_config_put8(config_handle, PCI_BCNF_LATENCY_TIMER,
ppb->ppb_latency_timer);
} else {
min_gnt = pci_config_get8(config_handle,
PCI_CONF_MIN_G);
latency_timer = min_gnt * 8;
}
pci_config_put8(config_handle, PCI_CONF_LATENCY_TIMER,
latency_timer);
n = pci_config_get8(config_handle, PCI_CONF_LATENCY_TIMER);
if (n != 0) {
(void) ndi_prop_update_int(DDI_DEV_T_NONE, child,
"latency-timer", n);
}
}
/*
* SPARC PCIe FMA specific
*
* Note: parent_data for parent is created only if this is sparc PCI-E
* platform, for which, SG take a different route to handle device
* errors.
*/
if (ppb->parent_bus == PCIE_PCIECAP_DEV_TYPE_PCIE_DEV) {
if (pcie_init_cfghdl(child) != DDI_SUCCESS) {
pci_config_teardown(&config_handle);
return (DDI_FAILURE);
}
pcie_init_dom(child);
}
/*
* Check to see if the XMITS/PCI-X workaround applies.
*/
n = ddi_getprop(DDI_DEV_T_ANY, child, DDI_PROP_NOTPROM,
"pcix-update-cmd-reg", -1);
if (n != -1) {
extern void pcix_set_cmd_reg(dev_info_t *child, uint16_t value);
DEBUG1(DBG_INIT_CLD, child, "Turning on XMITS NCPQ "
"Workaround: value = %x\n", n);
pcix_set_cmd_reg(child, n);
}
pci_config_teardown(&config_handle);
return (DDI_SUCCESS);
}
static int
ppb_initchild(dev_info_t *child)
{
struct ddi_parent_private_data *pdptr;
ppb_devstate_t *ppb;
char name[MAXNAMELEN];
ddi_acc_handle_t config_handle;
ushort_t command_preserve, command;
ppb = (ppb_devstate_t *)ddi_get_soft_state(ppb_state,
ddi_get_instance(ddi_get_parent(child)));
if (ppb_name_child(child, name, MAXNAMELEN) != DDI_SUCCESS)
return (DDI_FAILURE);
ddi_set_name_addr(child, name);
/*
* Pseudo nodes indicate a prototype node with per-instance
* properties to be merged into the real h/w device node.
* The interpretation of the unit-address is DD[,F]
* where DD is the device id and F is the function.
*/
if (ndi_dev_is_persistent_node(child) == 0) {
extern int pci_allow_pseudo_children;
ddi_set_parent_data(child, NULL);
/*
* Try to merge the properties from this prototype
* node into real h/w nodes.
*/
if (ndi_merge_node(child, ppb_name_child) == DDI_SUCCESS) {
/*
* Merged ok - return failure to remove the node.
*/
ddi_set_name_addr(child, NULL);
return (DDI_FAILURE);
}
/* workaround for ddivs to run under PCI */
if (pci_allow_pseudo_children)
return (DDI_SUCCESS);
/*
* The child was not merged into a h/w node,
* but there's not much we can do with it other
* than return failure to cause the node to be removed.
*/
cmn_err(CE_WARN, "!%s@%s: %s.conf properties not merged",
ddi_driver_name(child), ddi_get_name_addr(child),
ddi_driver_name(child));
ddi_set_name_addr(child, NULL);
return (DDI_NOT_WELL_FORMED);
}
ddi_set_parent_data(child, NULL);
/*
* PCIe FMA specific
*
* Note: parent_data for parent is created only if this is PCI-E
* platform, for which, SG take a different route to handle device
* errors.
*/
if (ppb->parent_bus == PCIE_PCIECAP_DEV_TYPE_PCIE_DEV) {
if (pcie_init_cfghdl(child) != DDI_SUCCESS)
return (DDI_FAILURE);
pcie_init_dom(child);
}
/* transfer select properties from PROM to kernel */
if (ddi_getprop(DDI_DEV_T_NONE, child, DDI_PROP_DONTPASS,
"interrupts", -1) != -1) {
pdptr = kmem_zalloc((sizeof (struct ddi_parent_private_data) +
sizeof (struct intrspec)), KM_SLEEP);
pdptr->par_intr = (struct intrspec *)(pdptr + 1);
pdptr->par_nintr = 1;
ddi_set_parent_data(child, pdptr);
} else
ddi_set_parent_data(child, NULL);
if (pci_config_setup(child, &config_handle) != DDI_SUCCESS) {
pcie_fini_dom(child);
return (DDI_FAILURE);
}
/*
* Support for the "command-preserve" property.
*/
command_preserve = ddi_prop_get_int(DDI_DEV_T_ANY, child,
DDI_PROP_DONTPASS, "command-preserve", 0);
command = pci_config_get16(config_handle, PCI_CONF_COMM);
command &= (command_preserve | PCI_COMM_BACK2BACK_ENAB);
command |= (ppb_command_default & ~command_preserve);
pci_config_put16(config_handle, PCI_CONF_COMM, command);
pci_config_teardown(&config_handle);
return (DDI_SUCCESS);
}
static int
pci_initchild(dev_info_t *child)
{
char name[80];
ddi_acc_handle_t config_handle;
ushort_t command_preserve, command;
if (pci_common_name_child(child, name, 80) != DDI_SUCCESS) {
return (DDI_FAILURE);
}
ddi_set_name_addr(child, name);
/*
* Pseudo nodes indicate a prototype node with per-instance
* properties to be merged into the real h/w device node.
* The interpretation of the unit-address is DD[,F]
* where DD is the device id and F is the function.
*/
if (ndi_dev_is_persistent_node(child) == 0) {
extern int pci_allow_pseudo_children;
ddi_set_parent_data(child, NULL);
/*
* Try to merge the properties from this prototype
* node into real h/w nodes.
*/
if (ndi_merge_node(child, pci_common_name_child) ==
DDI_SUCCESS) {
/*
* Merged ok - return failure to remove the node.
*/
ddi_set_name_addr(child, NULL);
return (DDI_FAILURE);
}
/* workaround for ddivs to run under PCI */
if (pci_allow_pseudo_children) {
/*
* If the "interrupts" property doesn't exist,
* this must be the ddivs no-intr case, and it returns
* DDI_SUCCESS instead of DDI_FAILURE.
*/
if (ddi_prop_get_int(DDI_DEV_T_ANY, child,
DDI_PROP_DONTPASS, "interrupts", -1) == -1)
return (DDI_SUCCESS);
/*
* Create the ddi_parent_private_data for a pseudo
* child.
*/
pci_common_set_parent_private_data(child);
return (DDI_SUCCESS);
}
/*
* The child was not merged into a h/w node,
* but there's not much we can do with it other
* than return failure to cause the node to be removed.
*/
cmn_err(CE_WARN, "!%s@%s: %s.conf properties not merged",
ddi_get_name(child), ddi_get_name_addr(child),
ddi_get_name(child));
ddi_set_name_addr(child, NULL);
return (DDI_NOT_WELL_FORMED);
}
if (ddi_prop_get_int(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS,
"interrupts", -1) != -1)
pci_common_set_parent_private_data(child);
else
ddi_set_parent_data(child, NULL);
/*
* initialize command register
*/
if (pci_config_setup(child, &config_handle) != DDI_SUCCESS)
return (DDI_FAILURE);
/*
* Support for the "command-preserve" property.
*/
command_preserve = ddi_prop_get_int(DDI_DEV_T_ANY, child,
DDI_PROP_DONTPASS, "command-preserve", 0);
command = pci_config_get16(config_handle, PCI_CONF_COMM);
command &= (command_preserve | PCI_COMM_BACK2BACK_ENAB);
command |= (pci_command_default & ~command_preserve);
pci_config_put16(config_handle, PCI_CONF_COMM, command);
pci_config_teardown(&config_handle);
return (DDI_SUCCESS);
}
