Пример #1
0
void
pcieb_plat_initchild(dev_info_t *child)
{
	struct ddi_parent_private_data *pdptr;
	if (ddi_getprop(DDI_DEV_T_NONE, child, DDI_PROP_DONTPASS, "interrupts",
	    -1) != -1) {
		pdptr = kmem_zalloc((sizeof (struct ddi_parent_private_data) +
		    sizeof (struct intrspec)), KM_SLEEP);
		pdptr->par_intr = (struct intrspec *)(pdptr + 1);
		pdptr->par_nintr = 1;
		ddi_set_parent_data(child, pdptr);
	} else
		ddi_set_parent_data(child, NULL);
}
Пример #2
0
static void
ppb_removechild(dev_info_t *dip)
{
	struct ddi_parent_private_data *pdptr;
	ppb_devstate_t *ppb;

	ppb = (ppb_devstate_t *)ddi_get_soft_state(ppb_state,
	    ddi_get_instance(ddi_get_parent(dip)));

	if (ppb->parent_bus == PCIE_PCIECAP_DEV_TYPE_PCIE_DEV) {
		pcie_fini_dom(dip);
		pcie_fini_cfghdl(dip);
	} else if ((pdptr = ddi_get_parent_data(dip)) != NULL) {
		kmem_free(pdptr, (sizeof (*pdptr) + sizeof (struct intrspec)));
		ddi_set_parent_data(dip, NULL);
	}
	ddi_set_name_addr(dip, NULL);

	/*
	 * Strip the node to properly convert it back to prototype form
	 */
	ddi_remove_minor_node(dip, NULL);

	impl_rem_dev_props(dip);
}
Пример #3
0
void
pcieb_plat_uninitchild(dev_info_t *child)
{
	struct ddi_parent_private_data	*pdptr;

	if ((pdptr = ddi_get_parent_data(child)) != NULL)
		kmem_free(pdptr, (sizeof (*pdptr) + sizeof (struct intrspec)));

	ddi_set_parent_data(child, NULL);
}
Пример #4
0
static int
name_child(dev_info_t *child, char *name, int namelen)
{
	char *unitaddr;

	ddi_set_parent_data(child, NULL);

	name[0] = '\0';
	if (ddi_prop_lookup_string(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS,
	    ACPIDEV_PROP_NAME_UNIT_ADDR, &unitaddr) == DDI_SUCCESS) {
		(void) strlcpy(name, unitaddr, namelen);
		ddi_prop_free(unitaddr);
	} else {
		ACPINEX_DEBUG(CE_NOTE, "!acpinex: failed to lookup child "
		    "unit-address prop for %p.", (void *)child);
	}

	return (DDI_SUCCESS);
}
Пример #5
0
static int
pci_removechild(dev_info_t *dip)
{
	struct ddi_parent_private_data *pdptr;

	if ((pdptr = ddi_get_parent_data(dip)) != NULL) {
		kmem_free(pdptr, (sizeof (*pdptr) + sizeof (struct intrspec)));
		ddi_set_parent_data(dip, NULL);
	}
	ddi_set_name_addr(dip, NULL);

	/*
	 * Strip the node to properly convert it back to prototype form
	 */
	ddi_remove_minor_node(dip, NULL);

	impl_rem_dev_props(dip);

	return (DDI_SUCCESS);
}
Пример #6
0
/*
 * control ops entry point:
 *
 * Requests handled completely:
 *	DDI_CTLOPS_INITCHILD
 *	DDI_CTLOPS_UNINITCHILD
 *	DDI_CTLOPS_REPORTDEV
 *	DDI_CTLOPS_REGSIZE
 *	DDI_CTLOPS_NREGS
 *
 * All others passed to parent.
 */
static int
acebus_ctlops(dev_info_t *dip, dev_info_t *rdip,
	ddi_ctl_enum_t op, void *arg, void *result)
{
#ifdef DEBUG
	ebus_devstate_t *ebus_p = get_acebus_soft_state(ddi_get_instance(dip));
#endif
	ebus_regspec_t *ebus_rp;
	int32_t reglen;
	int i, n;
	char name[10];

	switch (op) {
	case DDI_CTLOPS_INITCHILD: {
		dev_info_t *child = (dev_info_t *)arg;
		/*
		 * Set the address portion of the node name based on the
		 * address/offset.
		 */
		DBG2(D_CTLOPS, ebus_p, "DDI_CTLOPS_INITCHILD: rdip=%s%d\n",
		    ddi_get_name(child), ddi_get_instance(child));

		if (ddi_getlongprop(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS,
		    "reg", (caddr_t)&ebus_rp, &reglen) != DDI_SUCCESS) {

			DBG(D_CTLOPS, ebus_p, "can't get reg property\n");
			return (DDI_FAILURE);

		}

		(void) sprintf(name, "%x,%x", ebus_rp->addr_hi,
		    ebus_rp->addr_low);
		ddi_set_name_addr(child, name);
		kmem_free((caddr_t)ebus_rp, reglen);

		ddi_set_parent_data(child, NULL);

		return (DDI_SUCCESS);

	}

	case DDI_CTLOPS_UNINITCHILD:
		DBG2(D_CTLOPS, ebus_p, "DDI_CTLOPS_UNINITCHILD: rdip=%s%d\n",
		    ddi_get_name((dev_info_t *)arg),
		    ddi_get_instance((dev_info_t *)arg));
		ddi_set_name_addr((dev_info_t *)arg, NULL);
		ddi_remove_minor_node((dev_info_t *)arg, NULL);
		impl_rem_dev_props((dev_info_t *)arg);
		return (DDI_SUCCESS);

	case DDI_CTLOPS_REPORTDEV:

		DBG2(D_CTLOPS, ebus_p, "DDI_CTLOPS_REPORTDEV: rdip=%s%d\n",
		    ddi_get_name(rdip), ddi_get_instance(rdip));
		cmn_err(CE_CONT, "?%s%d at %s%d: offset %s\n",
		    ddi_driver_name(rdip), ddi_get_instance(rdip),
		    ddi_driver_name(dip), ddi_get_instance(dip),
		    ddi_get_name_addr(rdip));
		return (DDI_SUCCESS);

	case DDI_CTLOPS_REGSIZE:

		DBG2(D_CTLOPS, ebus_p, "DDI_CTLOPS_REGSIZE: rdip=%s%d\n",
		    ddi_get_name(rdip), ddi_get_instance(rdip));
		if (getprop(rdip, "reg", &ebus_rp, &i) != DDI_SUCCESS) {
			DBG(D_CTLOPS, ebus_p, "can't get reg property\n");
			return (DDI_FAILURE);
		}
		n = i / sizeof (ebus_regspec_t);
		if (*(int *)arg < 0 || *(int *)arg >= n) {
			DBG(D_MAP, ebus_p, "rnumber out of range\n");
			kmem_free((caddr_t)ebus_rp, i);
			return (DDI_FAILURE);
		}
		*((off_t *)result) = ebus_rp[*(int *)arg].size;
		kmem_free((caddr_t)ebus_rp, i);
		return (DDI_SUCCESS);

	case DDI_CTLOPS_NREGS:

		DBG2(D_CTLOPS, ebus_p, "DDI_CTLOPS_NREGS: rdip=%s%d\n",
		    ddi_get_name(rdip), ddi_get_instance(rdip));
		if (getprop(rdip, "reg", &ebus_rp, &i) != DDI_SUCCESS) {
			DBG(D_CTLOPS, ebus_p, "can't get reg property\n");
			return (DDI_FAILURE);
		}
		*((uint_t *)result) = i / sizeof (ebus_regspec_t);
		kmem_free((caddr_t)ebus_rp, i);
		return (DDI_SUCCESS);
	}

	/*
	 * Now pass the request up to our parent.
	 */
	DBG2(D_CTLOPS, ebus_p, "passing request to parent: rdip=%s%d\n",
	    ddi_get_name(rdip), ddi_get_instance(rdip));
	return (ddi_ctlops(dip, rdip, op, arg, result));
}
Пример #7
0
static int
cnex_ctl(dev_info_t *dip, dev_info_t *rdip, ddi_ctl_enum_t ctlop,
    void *arg, void *result)
{
	char		name[MAXNAMELEN];
	uint32_t	reglen;
	int		*cnex_regspec;

	switch (ctlop) {
	case DDI_CTLOPS_REPORTDEV:
		if (rdip == NULL)
			return (DDI_FAILURE);
		cmn_err(CE_CONT, "?channel-device: %s%d\n",
		    ddi_driver_name(rdip), ddi_get_instance(rdip));
		return (DDI_SUCCESS);

	case DDI_CTLOPS_INITCHILD:
	{
		dev_info_t *child = (dev_info_t *)arg;

		if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, child,
		    DDI_PROP_DONTPASS, "reg",
		    &cnex_regspec, &reglen) != DDI_SUCCESS) {
			return (DDI_FAILURE);
		}

		(void) snprintf(name, sizeof (name), "%x", *cnex_regspec);
		ddi_set_name_addr(child, name);
		ddi_set_parent_data(child, NULL);
		ddi_prop_free(cnex_regspec);
		return (DDI_SUCCESS);
	}

	case DDI_CTLOPS_UNINITCHILD:
	{
		dev_info_t *child = (dev_info_t *)arg;

		NDI_CONFIG_DEBUG((CE_NOTE,
		    "DDI_CTLOPS_UNINITCHILD(%s, instance=%d)",
		    ddi_driver_name(child), DEVI(child)->devi_instance));

		ddi_set_name_addr(child, NULL);

		return (DDI_SUCCESS);
	}

	case DDI_CTLOPS_DMAPMAPC:
	case DDI_CTLOPS_REPORTINT:
	case DDI_CTLOPS_REGSIZE:
	case DDI_CTLOPS_NREGS:
	case DDI_CTLOPS_SIDDEV:
	case DDI_CTLOPS_SLAVEONLY:
	case DDI_CTLOPS_AFFINITY:
	case DDI_CTLOPS_POKE:
	case DDI_CTLOPS_PEEK:
		/*
		 * These ops correspond to functions that "shouldn't" be called
		 * by a channel-device driver.  So we whine when we're called.
		 */
		cmn_err(CE_WARN, "%s%d: invalid op (%d) from %s%d\n",
		    ddi_driver_name(dip), ddi_get_instance(dip), ctlop,
		    ddi_driver_name(rdip), ddi_get_instance(rdip));
		return (DDI_FAILURE);

	case DDI_CTLOPS_ATTACH:
	case DDI_CTLOPS_BTOP:
	case DDI_CTLOPS_BTOPR:
	case DDI_CTLOPS_DETACH:
	case DDI_CTLOPS_DVMAPAGESIZE:
	case DDI_CTLOPS_IOMIN:
	case DDI_CTLOPS_POWER:
	case DDI_CTLOPS_PTOB:
	default:
		/*
		 * Everything else (e.g. PTOB/BTOP/BTOPR requests) we pass up
		 */
		return (ddi_ctlops(dip, rdip, ctlop, arg, result));
	}
}
Пример #8
0
static int
ppb_initchild(dev_info_t *child)
{
	char name[MAXNAMELEN];
	ddi_acc_handle_t config_handle;
	ushort_t command_preserve, command;
	uint_t n;
	ushort_t bcr;
	uchar_t header_type;
	uchar_t min_gnt, latency_timer;
	ppb_devstate_t *ppb;

	/*
	 * Name the child
	 */
	if (ppb_name_child(child, name, MAXNAMELEN) != DDI_SUCCESS)
		return (DDI_FAILURE);

	ddi_set_name_addr(child, name);
	ddi_set_parent_data(child, NULL);

	/*
	 * Pseudo nodes indicate a prototype node with per-instance
	 * properties to be merged into the real h/w device node.
	 * The interpretation of the unit-address is DD[,F]
	 * where DD is the device id and F is the function.
	 */
	if (ndi_dev_is_persistent_node(child) == 0) {
		extern int pci_allow_pseudo_children;

		/*
		 * Try to merge the properties from this prototype
		 * node into real h/w nodes.
		 */
		if (ndi_merge_node(child, ppb_name_child) == DDI_SUCCESS) {
			/*
			 * Merged ok - return failure to remove the node.
			 */
			ppb_removechild(child);
			return (DDI_FAILURE);
		}

		/* workaround for ddivs to run under PCI */
		if (pci_allow_pseudo_children)
			return (DDI_SUCCESS);

		/*
		 * The child was not merged into a h/w node,
		 * but there's not much we can do with it other
		 * than return failure to cause the node to be removed.
		 */
		cmn_err(CE_WARN, "!%s@%s: %s.conf properties not merged",
		    ddi_driver_name(child), ddi_get_name_addr(child),
		    ddi_driver_name(child));
		ppb_removechild(child);
		return (DDI_NOT_WELL_FORMED);
	}

	ppb = (ppb_devstate_t *)ddi_get_soft_state(ppb_state,
	    ddi_get_instance(ddi_get_parent(child)));

	ddi_set_parent_data(child, NULL);

	/*
	 * If hardware is PM capable, set up the power info structure.
	 * This also ensures the the bus will not be off (0MHz) otherwise
	 * system panics during a bus access.
	 */
	if (PM_CAPABLE(ppb->ppb_pwr_p)) {
		/*
		 * Create a pwr_info struct for child.  Bus will be
		 * at full speed after creating info.
		 */
		pci_pwr_create_info(ppb->ppb_pwr_p, child);
#ifdef DEBUG
		ASSERT(ppb->ppb_pwr_p->current_lvl == PM_LEVEL_B0);
#endif
	}

	/*
	 * If configuration registers were previously saved by
	 * child (before it entered D3), then let the child do the
	 * restore to set up the config regs as it'll first need to
	 * power the device out of D3.
	 */
	if (ddi_prop_exists(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS,
	    "config-regs-saved-by-child") == 1) {
		DEBUG2(DBG_PWR, ddi_get_parent(child),
		    "INITCHILD: config regs to be restored by child"
		    " for %s@%s\n", ddi_node_name(child),
		    ddi_get_name_addr(child));

		return (DDI_SUCCESS);
	}

	DEBUG2(DBG_PWR, ddi_get_parent(child),
	    "INITCHILD: config regs setup for %s@%s\n",
	    ddi_node_name(child), ddi_get_name_addr(child));

	if (pci_config_setup(child, &config_handle) != DDI_SUCCESS) {
		if (PM_CAPABLE(ppb->ppb_pwr_p)) {
			pci_pwr_rm_info(ppb->ppb_pwr_p, child);
		}

		return (DDI_FAILURE);
	}

	/*
	 * Determine the configuration header type.
	 */
	header_type = pci_config_get8(config_handle, PCI_CONF_HEADER);

	/*
	 * Support for the "command-preserve" property.
	 */
	command_preserve = ddi_prop_get_int(DDI_DEV_T_ANY, child,
	    DDI_PROP_DONTPASS, "command-preserve", 0);
	command = pci_config_get16(config_handle, PCI_CONF_COMM);
	command &= (command_preserve | PCI_COMM_BACK2BACK_ENAB);
	command |= (ppb_command_default & ~command_preserve);
	pci_config_put16(config_handle, PCI_CONF_COMM, command);

	/*
	 * If the device has a bus control register then program it
	 * based on the settings in the command register.
	 */
	if ((header_type  & PCI_HEADER_TYPE_M) == PCI_HEADER_ONE) {
		bcr = pci_config_get8(config_handle, PCI_BCNF_BCNTRL);
		if (ppb_command_default & PCI_COMM_PARITY_DETECT)
			bcr |= PCI_BCNF_BCNTRL_PARITY_ENABLE;
		if (ppb_command_default & PCI_COMM_SERR_ENABLE)
			bcr |= PCI_BCNF_BCNTRL_SERR_ENABLE;
		bcr |= PCI_BCNF_BCNTRL_MAST_AB_MODE;
		pci_config_put8(config_handle, PCI_BCNF_BCNTRL, bcr);
	}

	/*
	 * Initialize cache-line-size configuration register if needed.
	 */
	if (ppb_set_cache_line_size_register &&
	    ddi_getprop(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS,
	    "cache-line-size", 0) == 0) {
		pci_config_put8(config_handle, PCI_CONF_CACHE_LINESZ,
		    ppb->ppb_cache_line_size);
		n = pci_config_get8(config_handle, PCI_CONF_CACHE_LINESZ);
		if (n != 0) {
			(void) ndi_prop_update_int(DDI_DEV_T_NONE, child,
			    "cache-line-size", n);
		}
	}

	/*
	 * Initialize latency timer configuration registers if needed.
	 */
	if (ppb_set_latency_timer_register &&
	    ddi_getprop(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS,
	    "latency-timer", 0) == 0) {

		if ((header_type & PCI_HEADER_TYPE_M) == PCI_HEADER_ONE) {
			latency_timer = ppb->ppb_latency_timer;
			pci_config_put8(config_handle, PCI_BCNF_LATENCY_TIMER,
			    ppb->ppb_latency_timer);
		} else {
			min_gnt = pci_config_get8(config_handle,
			    PCI_CONF_MIN_G);
			latency_timer = min_gnt * 8;
		}
		pci_config_put8(config_handle, PCI_CONF_LATENCY_TIMER,
		    latency_timer);
		n = pci_config_get8(config_handle, PCI_CONF_LATENCY_TIMER);
		if (n != 0) {
			(void) ndi_prop_update_int(DDI_DEV_T_NONE, child,
			    "latency-timer", n);
		}
	}

	/*
	 * SPARC PCIe FMA specific
	 *
	 * Note: parent_data for parent is created only if this is sparc PCI-E
	 * platform, for which, SG take a different route to handle device
	 * errors.
	 */
	if (ppb->parent_bus == PCIE_PCIECAP_DEV_TYPE_PCIE_DEV) {
		if (pcie_init_cfghdl(child) != DDI_SUCCESS) {
			pci_config_teardown(&config_handle);
			return (DDI_FAILURE);
		}
		pcie_init_dom(child);
	}

	/*
	 * Check to see if the XMITS/PCI-X workaround applies.
	 */
	n = ddi_getprop(DDI_DEV_T_ANY, child, DDI_PROP_NOTPROM,
	    "pcix-update-cmd-reg", -1);

	if (n != -1) {
		extern void pcix_set_cmd_reg(dev_info_t *child, uint16_t value);
		DEBUG1(DBG_INIT_CLD, child, "Turning on XMITS NCPQ "
		    "Workaround: value = %x\n", n);
		pcix_set_cmd_reg(child, n);
	}
	pci_config_teardown(&config_handle);
	return (DDI_SUCCESS);
}
Пример #9
0
static int
ppb_initchild(dev_info_t *child)
{
	struct ddi_parent_private_data *pdptr;
	ppb_devstate_t *ppb;
	char name[MAXNAMELEN];
	ddi_acc_handle_t config_handle;
	ushort_t command_preserve, command;

	ppb = (ppb_devstate_t *)ddi_get_soft_state(ppb_state,
	    ddi_get_instance(ddi_get_parent(child)));

	if (ppb_name_child(child, name, MAXNAMELEN) != DDI_SUCCESS)
		return (DDI_FAILURE);
	ddi_set_name_addr(child, name);

	/*
	 * Pseudo nodes indicate a prototype node with per-instance
	 * properties to be merged into the real h/w device node.
	 * The interpretation of the unit-address is DD[,F]
	 * where DD is the device id and F is the function.
	 */
	if (ndi_dev_is_persistent_node(child) == 0) {
		extern int pci_allow_pseudo_children;

		ddi_set_parent_data(child, NULL);

		/*
		 * Try to merge the properties from this prototype
		 * node into real h/w nodes.
		 */
		if (ndi_merge_node(child, ppb_name_child) == DDI_SUCCESS) {
			/*
			 * Merged ok - return failure to remove the node.
			 */
			ddi_set_name_addr(child, NULL);
			return (DDI_FAILURE);
		}

		/* workaround for ddivs to run under PCI */
		if (pci_allow_pseudo_children)
			return (DDI_SUCCESS);

		/*
		 * The child was not merged into a h/w node,
		 * but there's not much we can do with it other
		 * than return failure to cause the node to be removed.
		 */
		cmn_err(CE_WARN, "!%s@%s: %s.conf properties not merged",
		    ddi_driver_name(child), ddi_get_name_addr(child),
		    ddi_driver_name(child));
		ddi_set_name_addr(child, NULL);
		return (DDI_NOT_WELL_FORMED);
	}

	ddi_set_parent_data(child, NULL);

	/*
	 * PCIe FMA specific
	 *
	 * Note: parent_data for parent is created only if this is PCI-E
	 * platform, for which, SG take a different route to handle device
	 * errors.
	 */
	if (ppb->parent_bus == PCIE_PCIECAP_DEV_TYPE_PCIE_DEV) {
		if (pcie_init_cfghdl(child) != DDI_SUCCESS)
			return (DDI_FAILURE);
		pcie_init_dom(child);
	}

	/* transfer select properties from PROM to kernel */
	if (ddi_getprop(DDI_DEV_T_NONE, child, DDI_PROP_DONTPASS,
	    "interrupts", -1) != -1) {
		pdptr = kmem_zalloc((sizeof (struct ddi_parent_private_data) +
		    sizeof (struct intrspec)), KM_SLEEP);
		pdptr->par_intr = (struct intrspec *)(pdptr + 1);
		pdptr->par_nintr = 1;
		ddi_set_parent_data(child, pdptr);
	} else
		ddi_set_parent_data(child, NULL);

	if (pci_config_setup(child, &config_handle) != DDI_SUCCESS) {
		pcie_fini_dom(child);
		return (DDI_FAILURE);
	}

	/*
	 * Support for the "command-preserve" property.
	 */
	command_preserve = ddi_prop_get_int(DDI_DEV_T_ANY, child,
	    DDI_PROP_DONTPASS, "command-preserve", 0);
	command = pci_config_get16(config_handle, PCI_CONF_COMM);
	command &= (command_preserve | PCI_COMM_BACK2BACK_ENAB);
	command |= (ppb_command_default & ~command_preserve);
	pci_config_put16(config_handle, PCI_CONF_COMM, command);

	pci_config_teardown(&config_handle);
	return (DDI_SUCCESS);
}
Пример #10
0
static int
pci_initchild(dev_info_t *child)
{
	char name[80];
	ddi_acc_handle_t config_handle;
	ushort_t command_preserve, command;

	if (pci_common_name_child(child, name, 80) != DDI_SUCCESS) {
		return (DDI_FAILURE);
	}
	ddi_set_name_addr(child, name);

	/*
	 * Pseudo nodes indicate a prototype node with per-instance
	 * properties to be merged into the real h/w device node.
	 * The interpretation of the unit-address is DD[,F]
	 * where DD is the device id and F is the function.
	 */
	if (ndi_dev_is_persistent_node(child) == 0) {
		extern int pci_allow_pseudo_children;

		ddi_set_parent_data(child, NULL);

		/*
		 * Try to merge the properties from this prototype
		 * node into real h/w nodes.
		 */
		if (ndi_merge_node(child, pci_common_name_child) ==
		    DDI_SUCCESS) {
			/*
			 * Merged ok - return failure to remove the node.
			 */
			ddi_set_name_addr(child, NULL);
			return (DDI_FAILURE);
		}

		/* workaround for ddivs to run under PCI */
		if (pci_allow_pseudo_children) {
			/*
			 * If the "interrupts" property doesn't exist,
			 * this must be the ddivs no-intr case, and it returns
			 * DDI_SUCCESS instead of DDI_FAILURE.
			 */
			if (ddi_prop_get_int(DDI_DEV_T_ANY, child,
			    DDI_PROP_DONTPASS, "interrupts", -1) == -1)
				return (DDI_SUCCESS);
			/*
			 * Create the ddi_parent_private_data for a pseudo
			 * child.
			 */
			pci_common_set_parent_private_data(child);
			return (DDI_SUCCESS);
		}

		/*
		 * The child was not merged into a h/w node,
		 * but there's not much we can do with it other
		 * than return failure to cause the node to be removed.
		 */
		cmn_err(CE_WARN, "!%s@%s: %s.conf properties not merged",
		    ddi_get_name(child), ddi_get_name_addr(child),
		    ddi_get_name(child));
		ddi_set_name_addr(child, NULL);
		return (DDI_NOT_WELL_FORMED);
	}

	if (ddi_prop_get_int(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS,
	    "interrupts", -1) != -1)
		pci_common_set_parent_private_data(child);
	else
		ddi_set_parent_data(child, NULL);

	/*
	 * initialize command register
	 */
	if (pci_config_setup(child, &config_handle) != DDI_SUCCESS)
		return (DDI_FAILURE);

	/*
	 * Support for the "command-preserve" property.
	 */
	command_preserve = ddi_prop_get_int(DDI_DEV_T_ANY, child,
	    DDI_PROP_DONTPASS, "command-preserve", 0);
	command = pci_config_get16(config_handle, PCI_CONF_COMM);
	command &= (command_preserve | PCI_COMM_BACK2BACK_ENAB);
	command |= (pci_command_default & ~command_preserve);
	pci_config_put16(config_handle, PCI_CONF_COMM, command);

	pci_config_teardown(&config_handle);
	return (DDI_SUCCESS);
}