/**@brief Function for initializing services that will be used by the application.
*
* @details Initialize the Heart Rate, Battery and Device Information services.
*/
static void services_init(void)
{
uint32_t err_code;
ble_bas_init_t bas_init;
ble_dis_init_t dis_init;
ble_ossw_init_t ossw_init;
memset(&ossw_init, 0, sizeof(ossw_init));
ossw_init.data_handler = ossw_data_handler;
err_code = ble_ossw_init(&m_ossw, &ossw_init);
APP_ERROR_CHECK(err_code);
// Initialize Battery Service.
memset(&bas_init, 0, sizeof(bas_init));
// Here the sec level for the Battery Service can be changed/increased.
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&bas_init.battery_level_char_attr_md.cccd_write_perm);
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&bas_init.battery_level_char_attr_md.read_perm);
BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&bas_init.battery_level_char_attr_md.write_perm);
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&bas_init.battery_level_report_read_perm);
bas_init.evt_handler = NULL;
bas_init.support_notification = true;
bas_init.p_report_ref = NULL;
bas_init.initial_batt_level = 100;
err_code = ble_bas_init(&m_bas, &bas_init);
APP_ERROR_CHECK(err_code);
// Initialize Device Information Service.
memset(&dis_init, 0, sizeof(dis_init));
ble_srv_ascii_to_utf8(&dis_init.manufact_name_str, (char *)MANUFACTURER_NAME);
ble_srv_ascii_to_utf8(&dis_init.fw_rev_str, (char *)FIRMWARE_VERSION);
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&dis_init.dis_attr_md.read_perm);
BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&dis_init.dis_attr_md.write_perm);
err_code = ble_dis_init(&dis_init);
APP_ERROR_CHECK(err_code);
#ifdef BLE_DFU_APP_SUPPORT
/** @snippet [DFU BLE Service initialization] */
ble_dfu_init_t dfus_init;
// Initialize the Device Firmware Update Service.
memset(&dfus_init, 0, sizeof(dfus_init));
dfus_init.evt_handler = dfu_app_on_dfu_evt;
dfus_init.error_handler = NULL;
dfus_init.evt_handler = dfu_app_on_dfu_evt;
dfus_init.revision = DFU_REVISION;
err_code = ble_dfu_init(&m_dfus, &dfus_init);
APP_ERROR_CHECK(err_code);
dfu_app_reset_prepare_set(reset_prepare);
dfu_app_dm_appl_instance_set(m_app_handle);
/** @snippet [DFU BLE Service initialization] */
#endif // BLE_DFU_APP_SUPPORT
}
/**@brief Function for initializing services that will be used by the application.
*
*/
static void services_init(void)
{
uint32_t err_code;
ble_dfu_init_t dfus_init;
// Initialize the Device Firmware Update Service.
memset(&dfus_init, 0, sizeof(dfus_init));
dfus_init.evt_handler = dfu_app_on_dfu_evt;
dfus_init.error_handler = NULL;
dfus_init.evt_handler = dfu_app_on_dfu_evt;
dfus_init.revision = DFU_REVISION;
err_code = ble_dfu_init(&m_dfus, &dfus_init);
APP_ERROR_CHECK(err_code);
dfu_app_reset_prepare_set(reset_prepare);
dfu_app_dm_appl_instance_set(m_app_handle);
// Initialize the Nordic Uart Service.
ble_nus_init_t nus_init;
memset(&nus_init, 0, sizeof(nus_init));
nus_init.data_handler = nus_data_handler;
err_code = ble_nus_init(&m_nus, &nus_init);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing services that will be used by the application.
*/
static void services_init(void)
{
uint32_t err_code;
ble_nus_init_t nus_init;
#if ENABLE_NEW_SERVECE
new_service_nus_init_t nus_init_2;
memset(&nus_init_2, 0, sizeof(nus_init_2));
#endif
memset(&nus_init, 0, sizeof(nus_init));
nus_init.data_handler = nus_data_handler;
err_code = ble_nus_init(&m_nus, &nus_init);
APP_ERROR_CHECK(err_code);
#if ENABLE_NEW_SERVECE
nus_init_2.data_handler = new_serve_nus_data_handler;
err_code = new_server_nus_init(&new_m_nus, &nus_init_2);
APP_ERROR_CHECK(err_code);
#endif
#ifdef BLE_DFU_APP_SUPPORT
/** @snippet [DFU BLE Service initialization] */
ble_dfu_init_t dfus_init;
// Initialize the Device Firmware Update Service.
memset(&dfus_init, 0, sizeof(dfus_init));
dfus_init.evt_handler = dfu_app_on_dfu_evt;
dfus_init.error_handler = NULL;
dfus_init.evt_handler = dfu_app_on_dfu_evt;
dfus_init.revision = DFU_REVISION;
err_code = ble_dfu_init(&m_dfus, &dfus_init);
APP_ERROR_CHECK(err_code);
dfu_app_reset_prepare_set(reset_prepare);
dfu_app_dm_appl_instance_set(m_app_handle);
/** @snippet [DFU BLE Service initialization] */
#endif // BLE_DFU_APP_SUPPORT
}
/**
* @brief BLEスタック初期化
*
* @detail BLE関連の初期化を行う。
* -# SoftDeviceハンドラ初期化
* -# システムイベントハンドラ初期化
* -# BLEスタック有効化
* -# BLEイベントハンドラ設定
* -# デバイス名設定
* -# Appearance設定(GAP_USE_APPEARANCE定義時)
* -# PPCP設定
* -# Service初期化
* -# Advertising初期化
* -# Connection初期化
*/
static void ble_stack_init(void)
{
uint32_t err_code;
/* BLEスタックの有効化 */
{
ble_enable_params_t ble_enable_params;
memset(&ble_enable_params, 0, sizeof(ble_enable_params));
ble_enable_params.gatts_enable_params.service_changed = IS_SRVC_CHANGED_CHARACT_PRESENT;
err_code = sd_ble_enable(&ble_enable_params);
APP_ERROR_CHECK(err_code);
}
/* デバイス名設定 */
{
//デバイス名へのWrite Permission(no protection, open link)
ble_gap_conn_sec_mode_t sec_mode;
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode);
err_code = sd_ble_gap_device_name_set(&sec_mode,
(const uint8_t *)GAP_DEVICE_NAME,
strlen(GAP_DEVICE_NAME));
APP_ERROR_CHECK(err_code);
}
#ifdef GAP_USE_APPEARANCE
/* Appearance設定 */
err_code = sd_ble_gap_appearance_set(GAP_USE_APPEARANCE);
APP_ERROR_CHECK(err_code);
#endif //GAP_USE_APPEARANCE
/*
* Peripheral Preferred Connection Parameters(PPCP)
* ここで設定しておくと、Connection Parameter Update Reqを送信せずに済むらしい。
*/
{
ble_gap_conn_params_t gap_conn_params = {0};
gap_conn_params.min_conn_interval = MSEC_TO_UNITS(CONN_MIN_INTERVAL, UNIT_1_25_MS);
gap_conn_params.max_conn_interval = MSEC_TO_UNITS(CONN_MAX_INTERVAL, UNIT_1_25_MS);
gap_conn_params.slave_latency = CONN_SLAVE_LATENCY;
gap_conn_params.conn_sup_timeout = MSEC_TO_UNITS(CONN_SUP_TIMEOUT, UNIT_10_MS);
err_code = sd_ble_gap_ppcp_set(&gap_conn_params);
APP_ERROR_CHECK(err_code);
}
/*
* Service初期化
*/
{
ble_ios_init_t ios_init;
ios_init.evt_handler_in = svc_ios_handler_in;
//ios_init.evt_handler_out = svc_ios_handler_out;
ios_init.len_in = 64;
ios_init.len_out = 32;
ble_ios_init(&m_ios, &ios_init);
}
/*
* Advertising初期化
*/
{
ble_uuid_t adv_uuids[] = { { IOS_UUID_SERVICE, m_ios.uuid_type } };
ble_advdata_t advdata;
ble_advdata_t scanrsp;
memset(&advdata, 0, sizeof(advdata));
memset(&scanrsp, 0, sizeof(scanrsp));
/*
* ble_advdata_name_type_t (ble_advdata.h)
*
* BLE_ADVDATA_NO_NAME : デバイス名無し
* BLE_ADVDATA_SHORT_NAME : デバイス名あり «Shortened Local Name»
* BLE_ADVDATA_FULL_NAME : デバイス名あり «Complete Local Name»
*
* https://www.bluetooth.org/en-us/specification/assigned-numbers/generic-access-profile
* https://developer.nordicsemi.com/nRF51_SDK/nRF51_SDK_v7.x.x/doc/7.2.0/s110/html/a01015.html#ga03c5ccf232779001be9786021b1a563b
*/
advdata.name_type = BLE_ADVDATA_FULL_NAME;
/*
* Appearanceが含まれるかどうか
*/
#ifdef GAP_USE_APPEARANCE
advdata.include_appearance = true;
#else //GAP_USE_APPEARANCE
advdata.include_appearance = false;
#endif //GAP_USE_APPEARANCE
/*
* Advertisingフラグの設定
* CSS_v4 : Part A 1.3 FLAGS
* https://developer.nordicsemi.com/nRF51_SDK/nRF51_SDK_v7.x.x/doc/7.2.0/s110/html/a00802.html
*
* BLE_GAP_ADV_FLAGS_LE_ONLY_LIMITED_DISC_MODE = BLE_GAP_ADV_FLAG_LE_LIMITED_DISC_MODE | BLE_GAP_ADV_FLAG_BR_EDR_NOT_SUPPORTED
* BLE_GAP_ADV_FLAG_LE_LIMITED_DISC_MODE : LE Limited Discoverable Mode
* BLE_GAP_ADV_FLAG_BR_EDR_NOT_SUPPORTED : BR/EDR not supported
*/
advdata.flags = BLE_GAP_ADV_FLAGS_LE_ONLY_LIMITED_DISC_MODE; //探索時間に制限あり
/* SCAN_RSPデータ設定 */
scanrsp.uuids_complete.uuid_cnt = ARRAY_SIZE(adv_uuids);
scanrsp.uuids_complete.p_uuids = adv_uuids;
err_code = ble_advdata_set(&advdata, &scanrsp);
APP_ERROR_CHECK(err_code);
}
/*
* Connection初期化
*/
{
ble_conn_params_init_t cp_init = {0};
/* APP_TIMER_PRESCALER = 0 */
cp_init.p_conn_params = NULL;
cp_init.first_conn_params_update_delay = APP_TIMER_TICKS(CONN_FIRST_PARAMS_UPDATE_DELAY, 0);
cp_init.next_conn_params_update_delay = APP_TIMER_TICKS(CONN_NEXT_PARAMS_UPDATE_DELAY, 0);
cp_init.max_conn_params_update_count = CONN_MAX_PARAMS_UPDATE_COUNT;
cp_init.start_on_notify_cccd_handle = BLE_GATT_HANDLE_INVALID;
cp_init.disconnect_on_fail = false;
cp_init.evt_handler = conn_params_evt_handler;
cp_init.error_handler = conn_params_error_handler;
err_code = ble_conn_params_init(&cp_init);
APP_ERROR_CHECK(err_code);
}
#ifdef BLE_DFU_APP_SUPPORT
/** @snippet [DFU BLE Service initialization] */
{
ble_dfu_init_t dfus_init;
// Initialize the Device Firmware Update Service.
memset(&dfus_init, 0, sizeof(dfus_init));
dfus_init.evt_handler = dfu_app_on_dfu_evt;
dfus_init.error_handler = NULL; //service_error_handler - Not used as only the switch from app to DFU mode is required and not full dfu service.
dfus_init.evt_handler = dfu_app_on_dfu_evt;
dfus_init.revision = DFU_REVISION;
err_code = ble_dfu_init(&m_dfus, &dfus_init);
APP_ERROR_CHECK(err_code);
dfu_app_reset_prepare_set(dfu_reset_prepare);
}
/** @snippet [DFU BLE Service initialization] */
#endif // BLE_DFU_APP_SUPPORT
}
/**@brief Function for initializing services that will be used by the application.
*
* @details Initialize the Running Speed and Cadence, Battery and Device Information services.
*/
static void services_init(void)
{
uint32_t err_code;
ble_rscs_init_t rscs_init;
ble_bas_init_t bas_init;
ble_dis_init_t dis_init;
// Initialize Running Speed and Cadence Service
memset(&rscs_init, 0, sizeof(rscs_init));
rscs_init.evt_handler = NULL;
rscs_init.feature = BLE_RSCS_FEATURE_INSTANT_STRIDE_LEN_BIT |
BLE_RSCS_FEATURE_WALKING_OR_RUNNING_STATUS_BIT;
rscs_init.initial_rcm.is_inst_stride_len_present = true;
rscs_init.initial_rcm.is_total_distance_present = false;
rscs_init.initial_rcm.is_running = false;
rscs_init.initial_rcm.inst_stride_length = 0;
// Here the sec level for the Running Speed and Cadence Service can be changed/increased.
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&rscs_init.rsc_meas_attr_md.cccd_write_perm);
BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&rscs_init.rsc_meas_attr_md.read_perm);
BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&rscs_init.rsc_meas_attr_md.write_perm);
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&rscs_init.rsc_feature_attr_md.read_perm);
BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&rscs_init.rsc_feature_attr_md.write_perm);
err_code = ble_rscs_init(&m_rscs, &rscs_init);
APP_ERROR_CHECK(err_code);
// Initialize Battery Service.
memset(&bas_init, 0, sizeof(bas_init));
// Here the sec level for the Battery Service can be changed/increased.
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&bas_init.battery_level_char_attr_md.cccd_write_perm);
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&bas_init.battery_level_char_attr_md.read_perm);
BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&bas_init.battery_level_char_attr_md.write_perm);
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&bas_init.battery_level_report_read_perm);
bas_init.evt_handler = NULL;
bas_init.support_notification = true;
bas_init.p_report_ref = NULL;
bas_init.initial_batt_level = 100;
err_code = ble_bas_init(&m_bas, &bas_init);
APP_ERROR_CHECK(err_code);
// Initialize Device Information Service.
memset(&dis_init, 0, sizeof(dis_init));
ble_srv_ascii_to_utf8(&dis_init.manufact_name_str, MANUFACTURER_NAME);
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&dis_init.dis_attr_md.read_perm);
BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&dis_init.dis_attr_md.write_perm);
err_code = ble_dis_init(&dis_init);
APP_ERROR_CHECK(err_code);
#ifdef BLE_DFU_APP_SUPPORT
/** @snippet [DFU BLE Service initialization] */
ble_dfu_init_t dfus_init;
// Initialize the Device Firmware Update Service.
memset(&dfus_init, 0, sizeof(dfus_init));
dfus_init.evt_handler = dfu_app_on_dfu_evt;
dfus_init.error_handler = NULL;
dfus_init.evt_handler = dfu_app_on_dfu_evt;
dfus_init.revision = DFU_REVISION;
err_code = ble_dfu_init(&m_dfus, &dfus_init);
APP_ERROR_CHECK(err_code);
dfu_app_reset_prepare_set(reset_prepare);
dfu_app_dm_appl_instance_set(m_app_handle);
/** @snippet [DFU BLE Service initialization] */
#endif // BLE_DFU_APP_SUPPORT
#ifdef BLE_DATA_SYNC_SUPPORT
ble_data_sync_init_t data_syncs_init;
memset(&data_syncs_init, 0, sizeof(data_syncs_init));
data_syncs_init.revision = 0X02;
err_code = ble_data_sync_init(&m_data_syncs, &data_syncs_init);
APP_ERROR_CHECK(err_code);
#endif
}
/**@brief Function for initializing services that will be used by the application.
*
* @details Initialize the Heart Rate, Battery and Device Information services.
*/
static void services_init(void)
{
uint32_t err_code;
ble_hrs_init_t hrs_init;
ble_bas_init_t bas_init;
ble_dis_init_t dis_init;
uint8_t body_sensor_location;
// Initialize Heart Rate Service.
body_sensor_location = BLE_HRS_BODY_SENSOR_LOCATION_FINGER;
memset(&hrs_init, 0, sizeof(hrs_init));
hrs_init.evt_handler = NULL;
hrs_init.is_sensor_contact_supported = true;
hrs_init.p_body_sensor_location = &body_sensor_location;
// Here the sec level for the Heart Rate Service can be changed/increased.
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&hrs_init.hrs_hrm_attr_md.cccd_write_perm);
//***************MODIFIED
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&hrs_init.hrs_hrm_attr_md.read_perm);
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&hrs_init.hrs_hrm_attr_md.write_perm);
//*********************
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&hrs_init.hrs_bsl_attr_md.read_perm);
BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&hrs_init.hrs_bsl_attr_md.write_perm);
err_code = ble_hrs_init(&m_hrs, &hrs_init);
APP_ERROR_CHECK(err_code);
// Initialize Battery Service.
memset(&bas_init, 0, sizeof(bas_init));
// Here the sec level for the Battery Service can be changed/increased.
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&bas_init.battery_level_char_attr_md.cccd_write_perm);
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&bas_init.battery_level_char_attr_md.read_perm);
BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&bas_init.battery_level_char_attr_md.write_perm);
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&bas_init.battery_level_report_read_perm);
bas_init.evt_handler = NULL;
bas_init.support_notification = true;
bas_init.p_report_ref = NULL;
bas_init.initial_batt_level = 100;
err_code = ble_bas_init(&m_bas, &bas_init);
APP_ERROR_CHECK(err_code);
// Initialize Device Information Service.
memset(&dis_init, 0, sizeof(dis_init));
ble_srv_ascii_to_utf8(&dis_init.manufact_name_str, (char *)MANUFACTURER_NAME);
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&dis_init.dis_attr_md.read_perm);
BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&dis_init.dis_attr_md.write_perm);
err_code = ble_dis_init(&dis_init);
APP_ERROR_CHECK(err_code);
#ifdef BLE_DFU_APP_SUPPORT
/** @snippet [DFU BLE Service initialization] */
ble_dfu_init_t dfus_init;
// Initialize the Device Firmware Update Service.
memset(&dfus_init, 0, sizeof(dfus_init));
dfus_init.evt_handler = dfu_app_on_dfu_evt;
dfus_init.error_handler = NULL; //service_error_handler - Not used as only the switch from app to DFU mode is required and not full dfu service.
err_code = ble_dfu_init(&m_dfus, &dfus_init);
APP_ERROR_CHECK(err_code);
dfu_app_reset_prepare_set(reset_prepare);
/** @snippet [DFU BLE Service initialization] */
#endif // BLE_DFU_APP_SUPPORT
}
/**@brief Function for initializing services that will be used by the application.
*
* @details Initialize the Heart Rate, Battery and Device Information services.
*/
static void services_init(void)
{
uint32_t err_code;
ble_bas_init_t bas_init;
ble_dis_init_t dis_init;
// Initialize Battery Service.
memset(&bas_init, 0, sizeof(bas_init));
// Here the sec level for the Battery Service can be changed/increased.
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&bas_init.battery_level_char_attr_md.cccd_write_perm);
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&bas_init.battery_level_char_attr_md.read_perm);
BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&bas_init.battery_level_char_attr_md.write_perm);
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&bas_init.battery_level_report_read_perm);
bas_init.evt_handler = NULL;
bas_init.support_notification = true;
bas_init.p_report_ref = NULL;
bas_init.initial_batt_level = 100;
err_code = ble_bas_init(&m_bas, &bas_init);
if (err_code == NRF_SUCCESS)
debug_printf("Battery service initialised!\r\n");
else
{
debug_printf("Error with initialising battery service.\r\n");
APP_ERROR_CHECK(err_code);
}
// Initialize Device Information Service.
memset(&dis_init, 0, sizeof(dis_init));
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&dis_init.dis_attr_md.read_perm);
BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&dis_init.dis_attr_md.write_perm);
err_code = ble_dis_init(&dis_init);
if (err_code == NRF_SUCCESS)
debug_printf("Device Information service initialised!\r\n");
else
{
debug_printf("Error with initialising device information service.\r\n");
APP_ERROR_CHECK(err_code);
}
// Initialize CCH custom Service.
cch_service_init(&m_cch_service);
#ifdef BLE_DFU_APP_SUPPORT
/** @snippet [DFU BLE Service initialization] */
ble_dfu_init_t dfus_init;
// Initialize the Device Firmware Update Service.
memset(&dfus_init, 0, sizeof(dfus_init));
dfus_init.evt_handler = dfu_app_on_dfu_evt;
dfus_init.error_handler = NULL;
dfus_init.evt_handler = dfu_app_on_dfu_evt;
dfus_init.revision = DFU_REVISION;
err_code = ble_dfu_init(&m_dfus, &dfus_init);
APP_ERROR_CHECK(err_code);
dfu_app_reset_prepare_set(reset_prepare);
dfu_app_dm_appl_instance_set(m_app_handle);
/** @snippet [DFU BLE Service initialization] */
#endif // BLE_DFU_APP_SUPPORT
}