static int
eth_output(const uip_lladdr_t * src, const uip_lladdr_t * dest)
{
//Packet filtering
//----------------
if(uip_len == 0) {
LOG6LBR_ERROR("eth_output: uip_len = 0\n");
return 0;
}
if(dest && linkaddr_cmp((linkaddr_t *) & dest,
(linkaddr_t *) & eth_mac64_addr)) {
LOG6LBR_ERROR("ethernet_output: sending to self\n");
return 0;
}
//Create packet header
//--------------------
//Packet type
BUF->type = uip_htons(UIP_ETHTYPE_IPV6);
//Destination address
if(IS_BROADCAST_ADDR(dest)) {
BUF->dest.addr[0] = 0x33;
BUF->dest.addr[1] = 0x33;
BUF->dest.addr[2] = UIP_IP_BUF->destipaddr.u8[12];
BUF->dest.addr[3] = UIP_IP_BUF->destipaddr.u8[13];
BUF->dest.addr[4] = UIP_IP_BUF->destipaddr.u8[14];
BUF->dest.addr[5] = UIP_IP_BUF->destipaddr.u8[15];
} else {
memcpy(BUF->dest.addr, dest, 6);
}
//Source address
if ( src != NULL ) {
memcpy(BUF->src.addr, src, 6);
} else {
memcpy(BUF->src.addr, eth_mac_addr, 6);
}
//Sending packet
//--------------
LOG6LBR_PRINTF(PACKET, PF_OUT, "eth_output: Sending packet to Ethernet\n");
eth_drv_send();
return 1;
}
static int
eth_output(uip_lladdr_t * src, uip_lladdr_t * dest)
{
if(IS_BROADCAST_ADDR(dest)) {
LOG6LBR_PRINTF(PACKET, PF_OUT, "eth_output: broadcast\n");
} else {
LOG6LBR_LLADDR_PRINTF(PACKET, PF_OUT, dest, "eth_output: ");
}
//Packet filtering
//----------------
if(uip_len == 0) {
LOG6LBR_ERROR("eth_output: uip_len = 0\n");
return 0;
}
#if CETIC_6LBR_ETH_FILTER_RPL
//Filter out RPL (broadcast) traffic
if(UIP_IP_BUF->proto == UIP_PROTO_ICMP6 &&
UIP_ICMP_BUF->type == ICMP6_RPL) {
//LOG6LBR_PRINTF(PACKET, PF_OUT, "eth_output: Filtering out RPL traffic\n");
return 0;
}
#endif
//IP packet alteration
//--------------------
#if CETIC_6LBR_ROUTER
//Modify source address
if((nvm_data.mode & CETIC_MODE_REWRITE_ADDR_MASK) != 0
&& uip_is_addr_link_local(&UIP_IP_BUF->srcipaddr)
&& uip_ds6_is_my_addr(&UIP_IP_BUF->srcipaddr)) {
LOG6LBR_PRINTF(PACKET, PF_OUT, "eth_output: Update src address\n");
uip_ipaddr_copy(&UIP_IP_BUF->srcipaddr, ð_ip_local_addr);
}
#endif
#if CETIC_6LBR_SMARTBRIDGE
//Reset Hop Limit when in smart-bridge for NDP packets
//TODO: Is this still needed after #4467 ?
if(UIP_IP_BUF->proto == UIP_PROTO_ICMP6 &&
(UIP_ICMP_BUF->type == ICMP6_NS || UIP_ICMP_BUF->type == ICMP6_NA
|| UIP_ICMP_BUF->type == ICMP6_RS || UIP_ICMP_BUF->type == ICMP6_RA)) {
UIP_IP_BUF->ttl = 255;
}
#endif
#if CETIC_6LBR_SMARTBRIDGE || CETIC_6LBR_TRANSPARENTBRIDGE
//Remove ROUTER flag when in bridge mode
if(UIP_IP_BUF->proto == UIP_PROTO_ICMP6 && UIP_ICMP_BUF->type == ICMP6_NA) {
//LOG6LBR_PRINTF(PACKET, PF_OUT, "eth_output: Updating NA\n");
UIP_ND6_NA_BUF->flagsreserved &= ~UIP_ND6_NA_FLAG_ROUTER;
}
#endif
//Some IP packets have link layer in them, need to change them around!
mac_translateIPLinkLayer(ll_8023_type);
//IP header alteration
//--------------------
//Remove Hop-by-hop extension header
if(uip_ext_len > 0) {
extern void remove_ext_hdr(void);
uint8_t proto = *((uint8_t *) UIP_IP_BUF + 40);
remove_ext_hdr();
UIP_IP_BUF->proto = proto;
}
//Create packet header
//--------------------
//Packet type
BUF->type = uip_htons(UIP_ETHTYPE_IPV6);
//Destination address
if(IS_BROADCAST_ADDR(dest)) {
BUF->dest.addr[0] = 0x33;
BUF->dest.addr[1] = 0x33;
BUF->dest.addr[2] = UIP_IP_BUF->destipaddr.u8[12];
BUF->dest.addr[3] = UIP_IP_BUF->destipaddr.u8[13];
BUF->dest.addr[4] = UIP_IP_BUF->destipaddr.u8[14];
BUF->dest.addr[5] = UIP_IP_BUF->destipaddr.u8[15];
} else {
mac_createEthernetAddr(BUF->dest.addr, dest);
}
//Source address
if ( src != NULL ) {
mac_createEthernetAddr(BUF->src.addr, src);
} else {
memcpy(BUF->src.addr, eth_mac_addr, 6);
}
//Sending packet
//--------------
LOG6LBR_PRINTF(PACKET, PF_OUT, "eth_output: Sending packet to Ethernet\n");
eth_drv_send();
return 1;
}
static err_t
low_level_output(struct netif *netif, struct pbuf *p)
{
eth_drv_send(netif, p);
return ERR_OK;
}
static int
eth_output(const uip_lladdr_t * src, const uip_lladdr_t * dest)
{
if(IS_BROADCAST_ADDR(dest)) {
LOG6LBR_PRINTF(PACKET, PF_OUT, "eth_output: broadcast\n");
} else {
LOG6LBR_LLADDR_PRINTF(PACKET, PF_OUT, dest, "eth_output: ");
}
//Packet filtering
//----------------
if(uip_len == 0) {
LOG6LBR_ERROR("eth_output: uip_len = 0\n");
return 0;
}
if(dest && linkaddr_cmp((linkaddr_t *) & dest,
(linkaddr_t *) & eth_mac64_addr)) {
LOG6LBR_ERROR("ethernet_output: sending to self\n");
return 0;
}
#if CETIC_6LBR_ETH_FILTER_RPL
//Filter out RPL (broadcast) traffic
if(UIP_IP_BUF->proto == UIP_PROTO_ICMP6 &&
UIP_ICMP_BUF->type == ICMP6_RPL) {
//LOG6LBR_PRINTF(PACKET, PF_OUT, "eth_output: Filtering out RPL traffic\n");
return 0;
}
#endif
//IP packet alteration
//--------------------
#if CETIC_6LBR_ROUTER
//Modify source address
if((nvm_data.mode & CETIC_MODE_REWRITE_ADDR_MASK) != 0
&& uip_is_addr_link_local(&UIP_IP_BUF->srcipaddr)
&& uip_ipaddr_cmp(&UIP_IP_BUF->srcipaddr, &wsn_ip_local_addr)) {
LOG6LBR_PRINTF(PACKET, PF_OUT, "eth_output: Update src address\n");
uip_ipaddr_copy(&UIP_IP_BUF->srcipaddr, ð_ip_local_addr);
if(UIP_IP_BUF->proto == UIP_PROTO_UDP) {
#if UIP_UDP_CHECKSUMS
/* Calculate UDP checksum. */
UIP_UDP_BUF->udpchksum = 0;
UIP_UDP_BUF->udpchksum = ~(uip_udpchksum());
if(UIP_UDP_BUF->udpchksum == 0) {
UIP_UDP_BUF->udpchksum = 0xffff;
}
#endif /* UIP_UDP_CHECKSUMS */
} else if(UIP_IP_BUF->proto == UIP_PROTO_TCP) {
/* Calculate TCP checksum. */
UIP_TCP_BUF->tcpchksum = 0;
UIP_TCP_BUF->tcpchksum = ~(uip_tcpchksum());
} else if(UIP_IP_BUF->proto == UIP_PROTO_ICMP6) {
/* Calculate ICMP checksum. */
UIP_ICMP_BUF->icmpchksum = 0;
UIP_ICMP_BUF->icmpchksum = ~uip_icmp6chksum();
}
}
#endif
#if CETIC_6LBR_SMARTBRIDGE
//Reset Hop Limit when in smart-bridge for NDP packets
//TODO: Is this still needed after #4467 ?
if(UIP_IP_BUF->proto == UIP_PROTO_ICMP6 &&
(UIP_ICMP_BUF->type == ICMP6_NS || UIP_ICMP_BUF->type == ICMP6_NA
|| UIP_ICMP_BUF->type == ICMP6_RS || UIP_ICMP_BUF->type == ICMP6_RA)) {
UIP_IP_BUF->ttl = 255;
}
#endif
#if CETIC_6LBR_SMARTBRIDGE || CETIC_6LBR_TRANSPARENTBRIDGE
//Remove ROUTER flag when in bridge mode
if(UIP_IP_BUF->proto == UIP_PROTO_ICMP6 && UIP_ICMP_BUF->type == ICMP6_NA) {
//LOG6LBR_PRINTF(PACKET, PF_OUT, "eth_output: Updating NA\n");
UIP_ND6_NA_BUF->flagsreserved &= ~UIP_ND6_NA_FLAG_ROUTER;
}
#endif
//Some IP packets have link layer in them, need to change them around!
mac_translateIPLinkLayer(ll_8023_type);
//IP header alteration
//--------------------
#if UIP_CONF_IPV6_RPL
rpl_remove_header();
#endif
//Create packet header
//--------------------
//Packet type
BUF->type = uip_htons(UIP_ETHTYPE_IPV6);
//Destination address
if(IS_BROADCAST_ADDR(dest)) {
BUF->dest.addr[0] = 0x33;
BUF->dest.addr[1] = 0x33;
BUF->dest.addr[2] = UIP_IP_BUF->destipaddr.u8[12];
BUF->dest.addr[3] = UIP_IP_BUF->destipaddr.u8[13];
BUF->dest.addr[4] = UIP_IP_BUF->destipaddr.u8[14];
BUF->dest.addr[5] = UIP_IP_BUF->destipaddr.u8[15];
} else {
mac_createEthernetAddr(BUF->dest.addr, dest);
}
//Source address
if ( src != NULL ) {
mac_createEthernetAddr(BUF->src.addr, src);
} else {
memcpy(BUF->src.addr, eth_mac_addr, 6);
}
//Sending packet
//--------------
LOG6LBR_PRINTF(PACKET, PF_OUT, "eth_output: Sending packet to Ethernet\n");
eth_drv_send(uip_buf, uip_len + UIP_LLH_LEN);
return 1;
}
/*---------------------------------------------------------------------------*/
static int
output(uint8_t *packet, uint16_t packet_len)
{
eth_drv_send(packet, packet_len);
return 0;
}