static int eth_output(const uip_lladdr_t * src, const uip_lladdr_t * dest) { //Packet filtering //---------------- if(uip_len == 0) { LOG6LBR_ERROR("eth_output: uip_len = 0\n"); return 0; } if(dest && linkaddr_cmp((linkaddr_t *) & dest, (linkaddr_t *) & eth_mac64_addr)) { LOG6LBR_ERROR("ethernet_output: sending to self\n"); return 0; } //Create packet header //-------------------- //Packet type BUF->type = uip_htons(UIP_ETHTYPE_IPV6); //Destination address if(IS_BROADCAST_ADDR(dest)) { BUF->dest.addr[0] = 0x33; BUF->dest.addr[1] = 0x33; BUF->dest.addr[2] = UIP_IP_BUF->destipaddr.u8[12]; BUF->dest.addr[3] = UIP_IP_BUF->destipaddr.u8[13]; BUF->dest.addr[4] = UIP_IP_BUF->destipaddr.u8[14]; BUF->dest.addr[5] = UIP_IP_BUF->destipaddr.u8[15]; } else { memcpy(BUF->dest.addr, dest, 6); } //Source address if ( src != NULL ) { memcpy(BUF->src.addr, src, 6); } else { memcpy(BUF->src.addr, eth_mac_addr, 6); } //Sending packet //-------------- LOG6LBR_PRINTF(PACKET, PF_OUT, "eth_output: Sending packet to Ethernet\n"); eth_drv_send(); return 1; }
static int eth_output(uip_lladdr_t * src, uip_lladdr_t * dest) { if(IS_BROADCAST_ADDR(dest)) { LOG6LBR_PRINTF(PACKET, PF_OUT, "eth_output: broadcast\n"); } else { LOG6LBR_LLADDR_PRINTF(PACKET, PF_OUT, dest, "eth_output: "); } //Packet filtering //---------------- if(uip_len == 0) { LOG6LBR_ERROR("eth_output: uip_len = 0\n"); return 0; } #if CETIC_6LBR_ETH_FILTER_RPL //Filter out RPL (broadcast) traffic if(UIP_IP_BUF->proto == UIP_PROTO_ICMP6 && UIP_ICMP_BUF->type == ICMP6_RPL) { //LOG6LBR_PRINTF(PACKET, PF_OUT, "eth_output: Filtering out RPL traffic\n"); return 0; } #endif //IP packet alteration //-------------------- #if CETIC_6LBR_ROUTER //Modify source address if((nvm_data.mode & CETIC_MODE_REWRITE_ADDR_MASK) != 0 && uip_is_addr_link_local(&UIP_IP_BUF->srcipaddr) && uip_ds6_is_my_addr(&UIP_IP_BUF->srcipaddr)) { LOG6LBR_PRINTF(PACKET, PF_OUT, "eth_output: Update src address\n"); uip_ipaddr_copy(&UIP_IP_BUF->srcipaddr, ð_ip_local_addr); } #endif #if CETIC_6LBR_SMARTBRIDGE //Reset Hop Limit when in smart-bridge for NDP packets //TODO: Is this still needed after #4467 ? if(UIP_IP_BUF->proto == UIP_PROTO_ICMP6 && (UIP_ICMP_BUF->type == ICMP6_NS || UIP_ICMP_BUF->type == ICMP6_NA || UIP_ICMP_BUF->type == ICMP6_RS || UIP_ICMP_BUF->type == ICMP6_RA)) { UIP_IP_BUF->ttl = 255; } #endif #if CETIC_6LBR_SMARTBRIDGE || CETIC_6LBR_TRANSPARENTBRIDGE //Remove ROUTER flag when in bridge mode if(UIP_IP_BUF->proto == UIP_PROTO_ICMP6 && UIP_ICMP_BUF->type == ICMP6_NA) { //LOG6LBR_PRINTF(PACKET, PF_OUT, "eth_output: Updating NA\n"); UIP_ND6_NA_BUF->flagsreserved &= ~UIP_ND6_NA_FLAG_ROUTER; } #endif //Some IP packets have link layer in them, need to change them around! mac_translateIPLinkLayer(ll_8023_type); //IP header alteration //-------------------- //Remove Hop-by-hop extension header if(uip_ext_len > 0) { extern void remove_ext_hdr(void); uint8_t proto = *((uint8_t *) UIP_IP_BUF + 40); remove_ext_hdr(); UIP_IP_BUF->proto = proto; } //Create packet header //-------------------- //Packet type BUF->type = uip_htons(UIP_ETHTYPE_IPV6); //Destination address if(IS_BROADCAST_ADDR(dest)) { BUF->dest.addr[0] = 0x33; BUF->dest.addr[1] = 0x33; BUF->dest.addr[2] = UIP_IP_BUF->destipaddr.u8[12]; BUF->dest.addr[3] = UIP_IP_BUF->destipaddr.u8[13]; BUF->dest.addr[4] = UIP_IP_BUF->destipaddr.u8[14]; BUF->dest.addr[5] = UIP_IP_BUF->destipaddr.u8[15]; } else { mac_createEthernetAddr(BUF->dest.addr, dest); } //Source address if ( src != NULL ) { mac_createEthernetAddr(BUF->src.addr, src); } else { memcpy(BUF->src.addr, eth_mac_addr, 6); } //Sending packet //-------------- LOG6LBR_PRINTF(PACKET, PF_OUT, "eth_output: Sending packet to Ethernet\n"); eth_drv_send(); return 1; }
static err_t low_level_output(struct netif *netif, struct pbuf *p) { eth_drv_send(netif, p); return ERR_OK; }
static int eth_output(const uip_lladdr_t * src, const uip_lladdr_t * dest) { if(IS_BROADCAST_ADDR(dest)) { LOG6LBR_PRINTF(PACKET, PF_OUT, "eth_output: broadcast\n"); } else { LOG6LBR_LLADDR_PRINTF(PACKET, PF_OUT, dest, "eth_output: "); } //Packet filtering //---------------- if(uip_len == 0) { LOG6LBR_ERROR("eth_output: uip_len = 0\n"); return 0; } if(dest && linkaddr_cmp((linkaddr_t *) & dest, (linkaddr_t *) & eth_mac64_addr)) { LOG6LBR_ERROR("ethernet_output: sending to self\n"); return 0; } #if CETIC_6LBR_ETH_FILTER_RPL //Filter out RPL (broadcast) traffic if(UIP_IP_BUF->proto == UIP_PROTO_ICMP6 && UIP_ICMP_BUF->type == ICMP6_RPL) { //LOG6LBR_PRINTF(PACKET, PF_OUT, "eth_output: Filtering out RPL traffic\n"); return 0; } #endif //IP packet alteration //-------------------- #if CETIC_6LBR_ROUTER //Modify source address if((nvm_data.mode & CETIC_MODE_REWRITE_ADDR_MASK) != 0 && uip_is_addr_link_local(&UIP_IP_BUF->srcipaddr) && uip_ipaddr_cmp(&UIP_IP_BUF->srcipaddr, &wsn_ip_local_addr)) { LOG6LBR_PRINTF(PACKET, PF_OUT, "eth_output: Update src address\n"); uip_ipaddr_copy(&UIP_IP_BUF->srcipaddr, ð_ip_local_addr); if(UIP_IP_BUF->proto == UIP_PROTO_UDP) { #if UIP_UDP_CHECKSUMS /* Calculate UDP checksum. */ UIP_UDP_BUF->udpchksum = 0; UIP_UDP_BUF->udpchksum = ~(uip_udpchksum()); if(UIP_UDP_BUF->udpchksum == 0) { UIP_UDP_BUF->udpchksum = 0xffff; } #endif /* UIP_UDP_CHECKSUMS */ } else if(UIP_IP_BUF->proto == UIP_PROTO_TCP) { /* Calculate TCP checksum. */ UIP_TCP_BUF->tcpchksum = 0; UIP_TCP_BUF->tcpchksum = ~(uip_tcpchksum()); } else if(UIP_IP_BUF->proto == UIP_PROTO_ICMP6) { /* Calculate ICMP checksum. */ UIP_ICMP_BUF->icmpchksum = 0; UIP_ICMP_BUF->icmpchksum = ~uip_icmp6chksum(); } } #endif #if CETIC_6LBR_SMARTBRIDGE //Reset Hop Limit when in smart-bridge for NDP packets //TODO: Is this still needed after #4467 ? if(UIP_IP_BUF->proto == UIP_PROTO_ICMP6 && (UIP_ICMP_BUF->type == ICMP6_NS || UIP_ICMP_BUF->type == ICMP6_NA || UIP_ICMP_BUF->type == ICMP6_RS || UIP_ICMP_BUF->type == ICMP6_RA)) { UIP_IP_BUF->ttl = 255; } #endif #if CETIC_6LBR_SMARTBRIDGE || CETIC_6LBR_TRANSPARENTBRIDGE //Remove ROUTER flag when in bridge mode if(UIP_IP_BUF->proto == UIP_PROTO_ICMP6 && UIP_ICMP_BUF->type == ICMP6_NA) { //LOG6LBR_PRINTF(PACKET, PF_OUT, "eth_output: Updating NA\n"); UIP_ND6_NA_BUF->flagsreserved &= ~UIP_ND6_NA_FLAG_ROUTER; } #endif //Some IP packets have link layer in them, need to change them around! mac_translateIPLinkLayer(ll_8023_type); //IP header alteration //-------------------- #if UIP_CONF_IPV6_RPL rpl_remove_header(); #endif //Create packet header //-------------------- //Packet type BUF->type = uip_htons(UIP_ETHTYPE_IPV6); //Destination address if(IS_BROADCAST_ADDR(dest)) { BUF->dest.addr[0] = 0x33; BUF->dest.addr[1] = 0x33; BUF->dest.addr[2] = UIP_IP_BUF->destipaddr.u8[12]; BUF->dest.addr[3] = UIP_IP_BUF->destipaddr.u8[13]; BUF->dest.addr[4] = UIP_IP_BUF->destipaddr.u8[14]; BUF->dest.addr[5] = UIP_IP_BUF->destipaddr.u8[15]; } else { mac_createEthernetAddr(BUF->dest.addr, dest); } //Source address if ( src != NULL ) { mac_createEthernetAddr(BUF->src.addr, src); } else { memcpy(BUF->src.addr, eth_mac_addr, 6); } //Sending packet //-------------- LOG6LBR_PRINTF(PACKET, PF_OUT, "eth_output: Sending packet to Ethernet\n"); eth_drv_send(uip_buf, uip_len + UIP_LLH_LEN); return 1; }
/*---------------------------------------------------------------------------*/ static int output(uint8_t *packet, uint16_t packet_len) { eth_drv_send(packet, packet_len); return 0; }