/**
* We are executing these heavy (logarithm) methods from outside the trigger callbacks for performance reasons.
* See also periodicFastCallback
*/
void Engine::updateSlowSensors(DECLARE_ENGINE_PARAMETER_F) {
int rpm = rpmCalculator.rpmValue;
isEngineChartEnabled = CONFIG(isEngineChartEnabled) && rpm < CONFIG(engineSnifferRpmThreshold);
sensorChartMode = rpm < CONFIG(sensorSnifferRpmThreshold) ? boardConfiguration->sensorChartMode : SC_OFF;
engineState.updateSlowSensors(PASS_ENGINE_PARAMETER_F);
if (engineConfiguration->fuelLevelSensor != EFI_ADC_NONE) {
float fuelLevelVoltage = getVoltageDivided("fuel", engineConfiguration->fuelLevelSensor);
engineState.fuelTankGauge = interpolate(boardConfiguration->fuelLevelEmptyTankVoltage, 0,
boardConfiguration->fuelLevelFullTankVoltage, 100,
fuelLevelVoltage);
}
float vBatt = hasVBatt(PASS_ENGINE_PARAMETER_F) ? getVBatt(PASS_ENGINE_PARAMETER_F) : 12;
engineState.injectorLag = getInjectorLag(vBatt PASS_ENGINE_PARAMETER);
}
/**
* We are executing these heavy (logarithm) methods from outside the trigger callbacks for performance reasons.
* See also periodicFastCallback
*/
void Engine::updateSlowSensors(DECLARE_ENGINE_PARAMETER_SIGNATURE) {
int rpm = rpmCalculator.getRpm(PASS_ENGINE_PARAMETER_SIGNATURE);
isEngineChartEnabled = CONFIG(isEngineChartEnabled) && rpm < CONFIG(engineSnifferRpmThreshold);
sensorChartMode = rpm < CONFIG(sensorSnifferRpmThreshold) ? boardConfiguration->sensorChartMode : SC_OFF;
engineState.updateSlowSensors(PASS_ENGINE_PARAMETER_SIGNATURE);
// todo: move this logic somewhere to sensors folder?
if (engineConfiguration->fuelLevelSensor != EFI_ADC_NONE) {
float fuelLevelVoltage = getVoltageDivided("fuel", engineConfiguration->fuelLevelSensor);
sensors.fuelTankGauge = interpolate(boardConfiguration->fuelLevelEmptyTankVoltage, 0,
boardConfiguration->fuelLevelFullTankVoltage, 100,
fuelLevelVoltage);
}
sensors.vBatt = hasVBatt(PASS_ENGINE_PARAMETER_SIGNATURE) ? getVBatt(PASS_ENGINE_PARAMETER_SIGNATURE) : 12;
engineState.injectorLag = getInjectorLag(sensors.vBatt PASS_ENGINE_PARAMETER_SUFFIX);
}
static void printSensors(Logging *log, bool fileFormat) {
// current time, in milliseconds
int nowMs = currentTimeMillis();
float sec = ((float) nowMs) / 1000;
reportSensorF(log, fileFormat, "time", "", sec, 3);
int rpm = 0;
#if EFI_SHAFT_POSITION_INPUT || defined(__DOXYGEN__)
rpm = getRpmE(engine);
reportSensorI(log, fileFormat, "rpm", "RPM", rpm);
// reportSensorF(log, fileFormat, "TRG_0_DUTY", "%", getTriggerDutyCycle(0), 2);
// reportSensorF(log, fileFormat, "TRG_1_DUTY", "%", getTriggerDutyCycle(1), 2);
#endif
if (hasMafSensor()) {
reportSensorF(log, fileFormat, "maf", "V", getMaf(), 2);
reportSensorF(log, fileFormat, "mafr", "kg/hr", getRealMaf(), 2);
}
reportSensorF(log, fileFormat, "ENGINE_LOAD", "x", getEngineLoadT(), 2);
#if EFI_ANALOG_SENSORS || defined(__DOXYGEN__)
if (engineConfiguration->hasMapSensor) {
reportSensorF(log, fileFormat, "MAP", "kPa", getMap(), 2);
// reportSensorF(log, fileFormat, "map_r", "V", getRawMap(), 2);
}
if (hasBaroSensor()) {
reportSensorF(log, fileFormat, "baro", "kPa", getBaroPressure(), 2);
}
if (engineConfiguration->hasAfrSensor) {
reportSensorF(log, fileFormat, "afr", "AFR", getAfr(), 2);
}
#endif
#if EFI_VEHICLE_SPEED || defined(__DOXYGEN__)
if (engineConfiguration->hasVehicleSpeedSensor) {
reportSensorF(log, fileFormat, "vss", "kph", getVehicleSpeed(), 2);
}
#endif /* EFI_PROD_CODE */
reportSensorF(log, fileFormat, "ks", "count", engine->knockCount, 0);
reportSensorF(log, fileFormat, "kv", "v", engine->knockVolts, 2);
// reportSensorF(log, fileFormat, "vref", "V", getVRef(engineConfiguration), 2);
if (hasVBatt(PASS_ENGINE_PARAMETER_F)) {
reportSensorF(log, fileFormat, "vbatt", "V", getVBatt(PASS_ENGINE_PARAMETER_F), 2);
}
reportSensorF(log, fileFormat, "TP", "%", getTPS(PASS_ENGINE_PARAMETER_F), 2);
if (fileFormat) {
reportSensorF(log, fileFormat, "tpsacc", "ms", engine->tpsAccelEnrichment.getTpsEnrichment(PASS_ENGINE_PARAMETER_F), 2);
reportSensorF(log, fileFormat, "advance", "deg", engine->tpsAccelEnrichment.getTpsEnrichment(PASS_ENGINE_PARAMETER_F), 2);
}
if (engineConfiguration->hasCltSensor) {
reportSensorF(log, fileFormat, "CLT", "C", getCoolantTemperature(PASS_ENGINE_PARAMETER_F), 2);
}
reportSensorF(log, fileFormat, "MAT", "C", getIntakeAirTemperature(PASS_ENGINE_PARAMETER_F), 2);
// debugFloat(&logger, "tch", getTCharge1(tps), 2);
}
static void printSensors(Logging *log, bool fileFormat) {
// current time, in milliseconds
int nowMs = currentTimeMillis();
float sec = ((float) nowMs) / 1000;
reportSensorF(log, fileFormat, "time", "", sec, 3); // log column 1
int rpm = 0;
#if EFI_SHAFT_POSITION_INPUT || defined(__DOXYGEN__)
rpm = getRpmE(engine);
reportSensorI(log, fileFormat, "rpm", "RPM", rpm); // log column 2
// reportSensorF(log, fileFormat, "TRG_0_DUTY", "%", getTriggerDutyCycle(0), 2);
// reportSensorF(log, fileFormat, "TRG_1_DUTY", "%", getTriggerDutyCycle(1), 2);
#endif
#if EFI_PROD_CODE || defined(__DOXYGEN__)
reportSensorF(log, fileFormat, "int_temp", "C", getMCUInternalTemperature(), 2); // log column #3
#endif
reportSensorI(log, fileFormat, "mode", "v", packEngineMode(PASS_ENGINE_PARAMETER_F)); // log column #3
if (hasCltSensor()) {
reportSensorF(log, fileFormat, "CLT", "C", getCoolantTemperature(PASS_ENGINE_PARAMETER_F), 2); // log column #4
}
if (hasTpsSensor()) {
reportSensorF(log, fileFormat, "TPS", "%", getTPS(PASS_ENGINE_PARAMETER_F), 2); // log column #5
}
if (hasVBatt(PASS_ENGINE_PARAMETER_F)) {
reportSensorF(log, fileFormat, "vbatt", "V", getVBatt(PASS_ENGINE_PARAMETER_F), 2); // log column #6
}
if (hasIatSensor()) {
reportSensorF(log, fileFormat, "IAT", "C", getIntakeAirTemperature(PASS_ENGINE_PARAMETER_F), 2); // log column #7
}
if (hasMafSensor()) {
reportSensorF(log, fileFormat, "maf", "V", getMaf(PASS_ENGINE_PARAMETER_F), 2);
reportSensorF(log, fileFormat, "mafr", "kg/hr", getRealMaf(PASS_ENGINE_PARAMETER_F), 2);
}
#if EFI_ANALOG_SENSORS || defined(__DOXYGEN__)
if (engineConfiguration->map.sensor.hwChannel != EFI_ADC_NONE) {
reportSensorF(log, fileFormat, "MAP", "kPa", getMap(), 2);
// reportSensorF(log, fileFormat, "map_r", "V", getRawMap(), 2);
}
#endif /* EFI_ANALOG_SENSORS */
#if EFI_ANALOG_SENSORS || defined(__DOXYGEN__)
if (hasBaroSensor()) {
reportSensorF(log, fileFormat, "baro", "kPa", getBaroPressure(), 2);
}
#endif /* EFI_ANALOG_SENSORS */
if (hasAfrSensor(PASS_ENGINE_PARAMETER_F)) {
reportSensorF(log, fileFormat, "afr", "AFR", getAfr(PASS_ENGINE_PARAMETER_F), 2);
}
#if EFI_IDLE_CONTROL || defined(__DOXYGEN__)
if (fileFormat) {
reportSensorF(log, fileFormat, "idle", "%", getIdlePosition(), 2);
}
#endif /* EFI_IDLE_CONTROL */
#if EFI_ANALOG_SENSORS || defined(__DOXYGEN__)
reportSensorF(log, fileFormat, "target", "AFR", engine->engineState.targetAFR, 2);
#endif /* EFI_ANALOG_SENSORS */
if (fileFormat) {
reportSensorF(log, fileFormat, "tCharge", "K", engine->engineState.tChargeK, 2); // log column #8
reportSensorF(log, fileFormat, "curVE", "%", veMap.getValue(rpm, getMap()), 2);
}
float engineLoad = getEngineLoadT(PASS_ENGINE_PARAMETER_F);
reportSensorF(log, fileFormat, "ENGINE_LOAD", "x", engineLoad, 2);
reportSensorF(log, fileFormat, "dwell", "ms", ENGINE(engineState.sparkDwell), 2);
if (fileFormat) {
reportSensorF(log, fileFormat, "timing", "deg", engine->engineState.timingAdvance, 2);
}
if (fileFormat) {
floatms_t fuelBase = getBaseFuel(rpm PASS_ENGINE_PARAMETER);
reportSensorF(log, fileFormat, "f: base", "ms", fuelBase, 2);
reportSensorF(log, fileFormat, "f: actual", "ms", ENGINE(actualLastInjection), 2);
reportSensorF(log, fileFormat, "f: lag", "ms", engine->engineState.injectorLag, 2);
reportSensorF(log, fileFormat, "f: running", "ms", ENGINE(engineState.runningFuel), 2);
reportSensorF(log, fileFormat, "f: wall amt", "v", ENGINE(wallFuel).getWallFuel(0), 2);
reportSensorF(log, fileFormat, "f: wall crr", "v", ENGINE(wallFuelCorrection), 2);
reportSensorI(log, fileFormat, "version", "#", getRusEfiVersion());
}
if (engineConfiguration->hasVehicleSpeedSensor) {
#if EFI_VEHICLE_SPEED || defined(__DOXYGEN__)
float vehicleSpeed = getVehicleSpeed();
#else
float vehicleSpeed = 0;
#endif /* EFI_PROD_CODE */
reportSensorF(log, fileFormat, "vss", "kph", vehicleSpeed, 2);
float sp2rpm = rpm == 0 ? 0 : vehicleSpeed / rpm;
reportSensorF(log, fileFormat, "sp2rpm", "x", sp2rpm, 2);
}
reportSensorF(log, fileFormat, "knck_c", "count", engine->knockCount, 0);
reportSensorF(log, fileFormat, "knck_v", "v", engine->knockVolts, 2);
// reportSensorF(log, fileFormat, "vref", "V", getVRef(engineConfiguration), 2);
if (fileFormat) {
reportSensorF(log, fileFormat, "f: tps delta", "v", engine->tpsAccelEnrichment.getMaxDelta(), 2);
reportSensorF(log, fileFormat, "f: tps fuel", "ms", engine->engineState.tpsAccelEnrich, 2);
reportSensorF(log, fileFormat, "f: el delta", "v", engine->engineLoadAccelEnrichment.getMaxDelta(), 2);
reportSensorF(log, fileFormat, "f: el fuel", "v", engine->engineLoadAccelEnrichment.getEngineLoadEnrichment(PASS_ENGINE_PARAMETER_F) * 100 / getMap(), 2);
reportSensorF(log, fileFormat, "f: duty", "%", getInjectorDutyCycle(rpm PASS_ENGINE_PARAMETER), 2);
}
// debugFloat(&logger, "tch", getTCharge1(tps), 2);
for (int i = 0;i<FSIO_ADC_COUNT;i++) {
if (engineConfiguration->fsioAdc[i] != EFI_ADC_NONE) {
strcpy(buf, "adcX");
buf[3] = '0' + i;
reportSensorF(log, fileFormat, buf, "", getVoltage("fsio", engineConfiguration->fsioAdc[i]), 2);
}
}
reportSensorI(log, fileFormat, "warn", "count", engine->engineState.warningCounter);
reportSensorI(log, fileFormat, "error", "code", engine->engineState.lastErrorCode);
}
