int EDIT_TOOL::Remove( const TOOL_EVENT& aEvent )
{
const SELECTION& selection = m_selectionTool->GetSelection();
if( !hoverSelection( selection ) )
return 0;
// Get a copy of the selected items set
PICKED_ITEMS_LIST selectedItems = selection.items;
PCB_BASE_FRAME* editFrame = getEditFrame<PCB_BASE_FRAME>();
// As we are about to remove items, they have to be removed from the selection first
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
// Save them
for( unsigned int i = 0; i < selectedItems.GetCount(); ++i )
selectedItems.SetPickedItemStatus( UR_DELETED, i );
editFrame->OnModify();
editFrame->SaveCopyInUndoList( selectedItems, UR_DELETED );
// And now remove
for( unsigned int i = 0; i < selectedItems.GetCount(); ++i )
remove( static_cast<BOARD_ITEM*>( selectedItems.GetPickedItem( i ) ) );
getModel<BOARD>()->GetRatsnest()->Recalculate();
return 0;
}
int EDIT_TOOL::MoveExact( const TOOL_EVENT& aEvent )
{
const SELECTION& selection = m_selectionTool->GetSelection();
// Shall the selection be cleared at the end?
bool unselect = selection.Empty();
if( !hoverSelection( selection ) )
return 0;
wxPoint translation;
double rotation = 0;
PCB_BASE_FRAME* editFrame = getEditFrame<PCB_BASE_FRAME>();
DIALOG_MOVE_EXACT dialog( editFrame, translation, rotation );
int ret = dialog.ShowModal();
if( ret == wxID_OK )
{
if( !isUndoInhibited() )
{
editFrame->OnModify();
// Record an action of move and rotate
editFrame->SaveCopyInUndoList( selection.items, UR_CHANGED );
}
VECTOR2I rp = selection.GetCenter();
wxPoint rotPoint( rp.x, rp.y );
for( unsigned int i = 0; i < selection.items.GetCount(); ++i )
{
BOARD_ITEM* item = selection.Item<BOARD_ITEM>( i );
item->Move( translation );
item->Rotate( rotPoint, rotation );
if( !m_dragging )
item->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
updateRatsnest( m_dragging );
if( m_dragging )
selection.group->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
else
getModel<BOARD>()->GetRatsnest()->Recalculate();
if( unselect )
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
m_toolMgr->RunAction( COMMON_ACTIONS::pointEditorUpdate, true );
}
return 0;
}
int EDIT_TOOL::Rotate( const TOOL_EVENT& aEvent )
{
const SELECTION& selection = m_selectionTool->GetSelection();
PCB_BASE_EDIT_FRAME* editFrame = getEditFrame<PCB_BASE_EDIT_FRAME>();
// Shall the selection be cleared at the end?
bool unselect = selection.Empty();
if( !hoverSelection( selection ) )
return 0;
wxPoint rotatePoint = getModificationPoint( selection );
// If it is being dragged, then it is already saved with UR_CHANGED flag
if( !isUndoInhibited() )
{
editFrame->OnModify();
editFrame->SaveCopyInUndoList( selection.items, UR_ROTATED, rotatePoint );
}
for( unsigned int i = 0; i < selection.items.GetCount(); ++i )
{
BOARD_ITEM* item = selection.Item<BOARD_ITEM>( i );
item->Rotate( rotatePoint, editFrame->GetRotationAngle() );
if( !m_dragging )
item->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
updateRatsnest( m_dragging );
// Update dragging offset (distance between cursor and the first dragged item)
m_offset = static_cast<BOARD_ITEM*>( selection.items.GetPickedItem( 0 ) )->GetPosition() -
rotatePoint;
if( m_dragging )
selection.group->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
else
getModel<BOARD>()->GetRatsnest()->Recalculate();
if( unselect )
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
m_toolMgr->RunAction( COMMON_ACTIONS::pointEditorUpdate, true );
return 0;
}
int EDIT_TOOL::Properties( const TOOL_EVENT& aEvent )
{
const SELECTION& selection = m_selectionTool->GetSelection();
PCB_BASE_EDIT_FRAME* editFrame = getEditFrame<PCB_BASE_EDIT_FRAME>();
if( !hoverSelection( selection, false ) )
return 0;
// Properties are displayed when there is only one item selected
if( selection.Size() == 1 )
{
// Display properties dialog
BOARD_ITEM* item = selection.Item<BOARD_ITEM>( 0 );
std::vector<PICKED_ITEMS_LIST*>& undoList = editFrame->GetScreen()->m_UndoList.m_CommandsList;
// Some of properties dialogs alter pointers, so we should deselect them
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
STATUS_FLAGS flags = item->GetFlags();
item->ClearFlags();
// It is necessary to determine if anything has changed
PICKED_ITEMS_LIST* lastChange = undoList.empty() ? NULL : undoList.back();
// Display properties dialog
editFrame->OnEditItemRequest( NULL, item );
PICKED_ITEMS_LIST* currentChange = undoList.empty() ? NULL : undoList.back();
if( lastChange != currentChange ) // Something has changed
{
processChanges( currentChange );
updateRatsnest( true );
getModel<BOARD>()->GetRatsnest()->Recalculate();
item->ViewUpdate();
m_toolMgr->RunAction( COMMON_ACTIONS::pointEditorUpdate, true );
}
item->SetFlags( flags );
}
return 0;
}
int EDIT_TOOL::CreateArray( const TOOL_EVENT& aEvent )
{
// first, check if we have a selection, or try to get one
SELECTION_TOOL* selTool = m_toolMgr->GetTool<SELECTION_TOOL>();
const SELECTION& selection = selTool->GetSelection();
// pick up items under the cursor if needed
if( !hoverSelection( selection ) )
return 0;
// we have a selection to work on now, so start the tool process
PCB_BASE_FRAME* editFrame = getEditFrame<PCB_BASE_FRAME>();
editFrame->OnModify();
GAL_ARRAY_CREATOR array_creator( *editFrame, m_editModules,
getModel<BOARD>()->GetRatsnest(),
selection );
array_creator.Invoke();
return 0;
}
int EDIT_TOOL::editFootprintInFpEditor( const TOOL_EVENT& aEvent )
{
const SELECTION& selection = m_selectionTool->GetSelection();
bool unselect = selection.Empty();
if( !hoverSelection( selection ) )
return 0;
MODULE* mod = uniqueSelected<MODULE>();
if( !mod )
return 0;
PCB_BASE_EDIT_FRAME* editFrame = getEditFrame<PCB_BASE_EDIT_FRAME>();
editFrame-> SetCurItem( mod );
if( editFrame->GetCurItem()->GetTimeStamp() == 0 ) // Module Editor needs a non null timestamp
{
editFrame->GetCurItem()->SetTimeStamp( GetNewTimeStamp() );
editFrame->OnModify();
}
FOOTPRINT_EDIT_FRAME* editor = (FOOTPRINT_EDIT_FRAME*) editFrame->Kiway().Player( FRAME_PCB_MODULE_EDITOR, true );
editor->Load_Module_From_BOARD( (MODULE*) editFrame->GetCurItem() );
editFrame->SetCurItem( NULL ); // the current module could be deleted by
editor->Show( true );
editor->Raise(); // Iconize( false );
if( unselect )
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
return 0;
}
int EDIT_TOOL::CreateArray( const TOOL_EVENT& aEvent )
{
// first, check if we have a selection, or try to get one
SELECTION_TOOL* selTool = m_toolMgr->GetTool<SELECTION_TOOL>();
const SELECTION& selection = selTool->GetSelection();
// Be sure that there is at least one item that we can modify
if( !hoverSelection( selection ) )
return 0;
bool originalItemsModified = false;
// we have a selection to work on now, so start the tool process
PCB_BASE_FRAME* editFrame = getEditFrame<PCB_BASE_FRAME>();
editFrame->OnModify();
if( m_editModules )
{
// Module editors do their undo point upfront for the whole module
editFrame->SaveCopyInUndoList( editFrame->GetBoard()->m_Modules, UR_MODEDIT );
}
else
{
// We may also change the original item
editFrame->SaveCopyInUndoList( selection.items, UR_CHANGED );
}
DIALOG_CREATE_ARRAY::ARRAY_OPTIONS* array_opts = NULL;
VECTOR2I rp = selection.GetCenter();
const wxPoint rotPoint( rp.x, rp.y );
DIALOG_CREATE_ARRAY dialog( editFrame, rotPoint, &array_opts );
int ret = dialog.ShowModal();
if( ret == wxID_OK && array_opts != NULL )
{
PICKED_ITEMS_LIST newItemList;
for( int i = 0; i < selection.Size(); ++i )
{
BOARD_ITEM* item = selection.Item<BOARD_ITEM>( i );
if( !item )
continue;
wxString cachedString;
if( item->Type() == PCB_MODULE_T )
{
cachedString = static_cast<MODULE*>( item )->GetReferencePrefix();
}
else if( EDA_TEXT* text = dynamic_cast<EDA_TEXT*>( item ) )
{
// Copy the text (not just take a reference
cachedString = text->GetText();
}
// iterate across the array, laying out the item at the
// correct position
const unsigned nPoints = array_opts->GetArraySize();
for( unsigned ptN = 0; ptN < nPoints; ++ptN )
{
BOARD_ITEM* newItem = NULL;
if( ptN == 0 )
newItem = item;
else
{
// if renumbering, no need to increment
const bool increment = !array_opts->ShouldRenumberItems();
// Some items cannot be duplicated
// i.e. the ref and value fields of a footprint or zones
// therefore newItem can be null
if( m_editModules )
newItem = editFrame->GetBoard()->m_Modules->DuplicateAndAddItem( item, increment );
else
{
#if 0
// @TODO: see if we allow zone duplication here
// Duplicate zones is especially tricky (overlaping zones must be merged)
// so zones are not duplicated
if( item->Type() == PCB_ZONE_AREA_T )
newItem = NULL;
else
#endif
newItem = editFrame->GetBoard()->DuplicateAndAddItem( item, increment );
}
if( newItem )
{
array_opts->TransformItem( ptN, newItem, rotPoint );
m_toolMgr->RunAction( COMMON_ACTIONS::unselectItem, true, newItem );
newItemList.PushItem( newItem );
if( newItem->Type() == PCB_MODULE_T)
{
static_cast<MODULE*>( newItem )->RunOnChildren( boost::bind( &KIGFX::VIEW::Add,
getView(), _1 ) );
}
editFrame->GetGalCanvas()->GetView()->Add( newItem );
getModel<BOARD>()->GetRatsnest()->Update( newItem );
}
}
// set the number if needed:
if( newItem && array_opts->ShouldRenumberItems() )
{
switch( newItem->Type() )
{
case PCB_PAD_T:
{
const wxString padName = array_opts->GetItemNumber( ptN );
static_cast<D_PAD*>( newItem )->SetPadName( padName );
originalItemsModified = true;
break;
}
case PCB_MODULE_T:
{
const wxString moduleName = array_opts->GetItemNumber( ptN );
MODULE* module = static_cast<MODULE*>( newItem );
module->SetReference( cachedString + moduleName );
originalItemsModified = true;
break;
}
case PCB_MODULE_TEXT_T:
case PCB_TEXT_T:
{
EDA_TEXT* text = dynamic_cast<EDA_TEXT*>( newItem );
if( text )
text->SetText( array_opts->InterpolateNumberIntoString( ptN, cachedString ) );
originalItemsModified = true;
break;
}
default:
// no renumbering of other items
break;
}
}
}
}
if( !m_editModules )
{
if( originalItemsModified )
{
// Update the appearance of the original items
selection.group->ItemsViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
// Add all items as a single undo point for PCB editors
// TODO: Can this be merged into the previous undo point (where
// we saved the original items)
editFrame->SaveCopyInUndoList( newItemList, UR_NEW );
}
}
getModel<BOARD>()->GetRatsnest()->Recalculate();
return 0;
}
int EDIT_TOOL::Duplicate( const TOOL_EVENT& aEvent )
{
bool increment = aEvent.IsAction( &COMMON_ACTIONS::duplicateIncrement );
// first, check if we have a selection, or try to get one
SELECTION_TOOL* selTool = m_toolMgr->GetTool<SELECTION_TOOL>();
const SELECTION& selection = selTool->GetSelection();
// Be sure that there is at least one item that we can modify
if( !hoverSelection( selection ) )
return 0;
// we have a selection to work on now, so start the tool process
PCB_BASE_FRAME* editFrame = getEditFrame<PCB_BASE_FRAME>();
editFrame->OnModify();
// prevent other tools making undo points while the duplicate is going on
// so that if you cancel, you don't get a duplicate object hiding over
// the original
incUndoInhibit();
if( m_editModules )
editFrame->SaveCopyInUndoList( editFrame->GetBoard()->m_Modules, UR_MODEDIT );
std::vector<BOARD_ITEM*> old_items;
for( int i = 0; i < selection.Size(); ++i )
{
BOARD_ITEM* item = selection.Item<BOARD_ITEM>( i );
if( item )
old_items.push_back( item );
}
for( unsigned i = 0; i < old_items.size(); ++i )
{
BOARD_ITEM* item = old_items[i];
// Unselect the item, so we won't pick it up again
// Do this first, so a single-item duplicate will correctly call
// SetCurItem and show the item properties
m_toolMgr->RunAction( COMMON_ACTIONS::unselectItem, true, item );
BOARD_ITEM* new_item = NULL;
if( m_editModules )
new_item = editFrame->GetBoard()->m_Modules->DuplicateAndAddItem( item, increment );
else
{
#if 0
// @TODO: see if we allow zone duplication here
// Duplicate zones is especially tricky (overlaping zones must be merged)
// so zones are not duplicated
if( item->Type() != PCB_ZONE_AREA_T )
#endif
new_item = editFrame->GetBoard()->DuplicateAndAddItem( item, increment );
}
if( new_item )
{
if( new_item->Type() == PCB_MODULE_T )
{
static_cast<MODULE*>( new_item )->RunOnChildren( boost::bind( &KIGFX::VIEW::Add,
getView(), _1 ) );
}
editFrame->GetGalCanvas()->GetView()->Add( new_item );
// Select the new item, so we can pick it up
m_toolMgr->RunAction( COMMON_ACTIONS::selectItem, true, new_item );
}
}
// record the new items as added
if( !m_editModules )
editFrame->SaveCopyInUndoList( selection.items, UR_NEW );
editFrame->DisplayToolMsg( wxString::Format( _( "Duplicated %d item(s)" ),
(int) old_items.size() ) );
// pick up the selected item(s) and start moving
// this works well for "dropping" copies around
TOOL_EVENT evt = COMMON_ACTIONS::editActivate.MakeEvent();
Main( evt );
// and re-enable undos
decUndoInhibit();
return 0;
}
int EDIT_TOOL::Properties( const TOOL_EVENT& aEvent )
{
const SELECTION& selection = m_selectionTool->GetSelection();
PCB_BASE_EDIT_FRAME* editFrame = getEditFrame<PCB_BASE_EDIT_FRAME>();
// Shall the selection be cleared at the end?
bool unselect = selection.Empty();
if( !hoverSelection( selection, false ) )
return 0;
// Tracks & vias are treated in a special way:
if( ( SELECTION_CONDITIONS::OnlyTypes( m_tracksViasType ) )( selection ) )
{
DIALOG_TRACK_VIA_PROPERTIES dlg( editFrame, selection );
if( dlg.ShowModal() )
{
RN_DATA* ratsnest = getModel<BOARD>()->GetRatsnest();
editFrame->OnModify();
editFrame->SaveCopyInUndoList( selection.items, UR_CHANGED );
dlg.Apply();
selection.ForAll<KIGFX::VIEW_ITEM>( boost::bind( &KIGFX::VIEW_ITEM::ViewUpdate, _1,
KIGFX::VIEW_ITEM::ALL ) );
selection.ForAll<BOARD_ITEM>( boost::bind( &RN_DATA::Update, ratsnest, _1 ) );
ratsnest->Recalculate();
}
}
else if( selection.Size() == 1 ) // Properties are displayed when there is only one item selected
{
// Display properties dialog
BOARD_ITEM* item = selection.Item<BOARD_ITEM>( 0 );
// Store the head of the undo list to compare if anything has changed
std::vector<PICKED_ITEMS_LIST*>& undoList = editFrame->GetScreen()->m_UndoList.m_CommandsList;
// Some of properties dialogs alter pointers, so we should deselect them
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
STATUS_FLAGS flags = item->GetFlags();
item->ClearFlags();
// It is necessary to determine if anything has changed, so store the current undo save point
PICKED_ITEMS_LIST* undoSavePoint = undoList.empty() ? NULL : undoList.back();
// Display properties dialog provided by the legacy canvas frame
editFrame->OnEditItemRequest( NULL, item );
if( !undoList.empty() && undoList.back() != undoSavePoint ) // Undo buffer has changed
{
// Process changes stored after undoSavePoint
processUndoBuffer( undoSavePoint );
// Update the modified item
item->ViewUpdate();
RN_DATA* ratsnest = getModel<BOARD>()->GetRatsnest();
ratsnest->Recalculate();
// TODO OBSERVER! I miss you so much..
m_toolMgr->RunAction( COMMON_ACTIONS::pointEditorUpdate, true );
}
item->SetFlags( flags );
}
if( unselect )
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
return 0;
}
int EDIT_TOOL::Main( const TOOL_EVENT& aEvent )
{
KIGFX::VIEW_CONTROLS* controls = getViewControls();
PCB_BASE_EDIT_FRAME* editFrame = getEditFrame<PCB_BASE_EDIT_FRAME>();
VECTOR2I originalCursorPos = controls->GetCursorPosition();
const SELECTION& selection = m_selectionTool->GetSelection();
// Shall the selection be cleared at the end?
bool unselect = selection.Empty();
// Be sure that there is at least one item that we can modify. If nothing was selected before,
// try looking for the stuff under mouse cursor (i.e. Kicad old-style hover selection)
if( !hoverSelection( selection ) )
return 0;
Activate();
m_dragging = false; // Are selected items being dragged?
bool restore = false; // Should items' state be restored when finishing the tool?
bool lockOverride = false;
// By default, modified items need to update their geometry
m_updateFlag = KIGFX::VIEW_ITEM::GEOMETRY;
controls->ShowCursor( true );
// cumulative translation
wxPoint totalMovement( 0, 0 );
GRID_HELPER grid( editFrame );
OPT_TOOL_EVENT evt = aEvent;
// Main loop: keep receiving events
do
{
if( evt->IsCancel() )
{
restore = true; // Cancelling the tool means that items have to be restored
break; // Finish
}
else if( evt->Action() == TA_UNDO_REDO )
{
unselect = true;
break;
}
else if( evt->IsAction( &COMMON_ACTIONS::editActivate )
|| evt->IsMotion() || evt->IsDrag( BUT_LEFT ) )
{
BOARD_ITEM* item = selection.Item<BOARD_ITEM>( 0 );
if( m_dragging && evt->Category() == TC_MOUSE )
{
m_cursor = grid.BestSnapAnchor( evt->Position(), item );
controls->ForceCursorPosition( true, m_cursor );
wxPoint movement = wxPoint( m_cursor.x, m_cursor.y ) - item->GetPosition();
totalMovement += movement;
// Drag items to the current cursor position
for( unsigned int i = 0; i < selection.items.GetCount(); ++i )
selection.Item<BOARD_ITEM>( i )->Move( movement + m_offset );
updateRatsnest( true );
}
else if( !m_dragging ) // Prepare to start dragging
{
if( !invokeInlineRouter() )
{
m_selectionTool->SanitizeSelection();
if( selection.Empty() )
break;
// deal with locked items (override lock or abort the operation)
SELECTION_LOCK_FLAGS lockFlags = m_selectionTool->CheckLock();
if( lockFlags == SELECTION_LOCKED )
break;
else if( lockFlags == SELECTION_LOCK_OVERRIDE )
lockOverride = true;
// Save items, so changes can be undone
if( !isUndoInhibited() )
{
editFrame->OnModify();
editFrame->SaveCopyInUndoList( selection.items, UR_CHANGED );
}
m_cursor = controls->GetCursorPosition();
if( selection.Size() == 1 )
{
// Set the current cursor position to the first dragged item origin, so the
// movement vector could be computed later
m_cursor = grid.BestDragOrigin( originalCursorPos, item );
grid.SetAuxAxes( true, m_cursor );
}
else
{
m_cursor = grid.Align( m_cursor );
}
controls->ForceCursorPosition( true, m_cursor );
controls->WarpCursor( m_cursor, true );
VECTOR2I o = VECTOR2I( item->GetPosition() );
m_offset.x = o.x - m_cursor.x;
m_offset.y = o.y - m_cursor.y;
controls->SetAutoPan( true );
m_dragging = true;
incUndoInhibit();
}
}
selection.group->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
m_toolMgr->RunAction( COMMON_ACTIONS::pointEditorUpdate, true );
}
// Dispatch TOOL_ACTIONs
else if( evt->Category() == TC_COMMAND )
{
if( evt->IsAction( &COMMON_ACTIONS::rotate ) )
{
Rotate( aEvent );
}
else if( evt->IsAction( &COMMON_ACTIONS::flip ) )
{
Flip( aEvent );
// Flip causes change of layers
enableUpdateFlag( KIGFX::VIEW_ITEM::LAYERS );
}
else if( evt->IsAction( &COMMON_ACTIONS::remove ) )
{
Remove( aEvent );
break; // exit the loop, as there is no further processing for removed items
}
else if( evt->IsAction( &COMMON_ACTIONS::duplicate ) )
{
// On duplicate, stop moving this item
// The duplicate tool should then select the new item and start
// a new move procedure
break;
}
else if( evt->IsAction( &COMMON_ACTIONS::moveExact ) )
{
// Can't do this, because the selection will then contain
// stale pointers and it will all go horribly wrong...
//editFrame->RestoreCopyFromUndoList( dummy );
//
// So, instead, reset the position manually
for( unsigned int i = 0; i < selection.items.GetCount(); ++i )
{
BOARD_ITEM* item = selection.Item<BOARD_ITEM>( i );
item->SetPosition( item->GetPosition() - totalMovement );
// And what about flipping and rotation?
// for now, they won't be undone, but maybe that is how
// it should be, so you can flip and move exact in the
// same action?
}
// This causes a double event, so we will get the dialogue
// correctly, somehow - why does Rotate not?
//MoveExact( aEvent );
break; // exit the loop - we move exactly, so we have finished moving
}
}
else if( evt->IsMouseUp( BUT_LEFT ) || evt->IsClick( BUT_LEFT ) )
{
if( !lockOverride )
break; // Finish
lockOverride = false;
}
} while( evt = Wait() );
if( m_dragging )
decUndoInhibit();
m_dragging = false;
m_offset.x = 0;
m_offset.y = 0;
if( restore )
{
// Modifications have to be rollbacked, so restore the previous state of items
wxCommandEvent dummy;
editFrame->RestoreCopyFromUndoList( dummy );
}
else
{
// Changes are applied, so update the items
selection.group->ItemsViewUpdate( m_updateFlag );
}
if( unselect )
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
RN_DATA* ratsnest = getModel<BOARD>()->GetRatsnest();
ratsnest->ClearSimple();
ratsnest->Recalculate();
controls->ShowCursor( false );
controls->SetAutoPan( false );
return 0;
}