static void __init exc_lvl_early_init(void)
{
unsigned int i;
for_each_possible_cpu(i) {
critirq_ctx[i] = (struct thread_info *)
__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
dbgirq_ctx[i] = (struct thread_info *)
__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
mcheckirq_ctx[i] = (struct thread_info *)
__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
}
}
static void __init irqstack_early_init(void)
{
unsigned int i;
/* interrupt stacks must be in lowmem, we get that for free on ppc32
* as the lmb is limited to lowmem by LMB_REAL_LIMIT */
for_each_possible_cpu(i) {
softirq_ctx[i] = (struct thread_info *)
__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
hardirq_ctx[i] = (struct thread_info *)
__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
}
}
static void __init exc_lvl_early_init(void)
{
unsigned int i;
/* interrupt stacks must be in lowmem, we get that for free on ppc32
* as the lmb is limited to lowmem by LMB_REAL_LIMIT */
for_each_possible_cpu(i) {
critirq_ctx[i] = (struct thread_info *)
__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
#ifdef CONFIG_BOOKE
dbgirq_ctx[i] = (struct thread_info *)
__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
mcheckirq_ctx[i] = (struct thread_info *)
__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
#endif
}
}
/*
* Allocate DP-Ram and memory buffers. We need to allocate a transmit and
* receive buffer descriptors from dual port ram, and a character
* buffer area from host mem. If we are allocating for the console we need
* to do it from bootmem
*/
int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
{
int dpmemsz, memsz;
u8 *dp_mem;
unsigned long dp_offset;
u8 *mem_addr;
dma_addr_t dma_addr = 0;
pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line);
dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos);
dp_offset = cpm_dpalloc(dpmemsz, 8);
if (IS_ERR_VALUE(dp_offset)) {
printk(KERN_ERR
"cpm_uart_cpm.c: could not allocate buffer descriptors\n");
return -ENOMEM;
}
dp_mem = cpm_dpram_addr(dp_offset);
memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
if (is_con) {
/* KGDB hits this before bootmem is setup */
if (init_bootmem_done) {
mem_addr = alloc_bootmem(memsz);
dma_addr = virt_to_bus(mem_addr);
} else {
dma_addr = (dma_addr_t)lmb_alloc(memsz, 8);
mem_addr = __va(dma_addr);
}
}
else
mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
GFP_KERNEL);
if (mem_addr == NULL) {
cpm_dpfree(dp_offset);
printk(KERN_ERR
"cpm_uart_cpm.c: could not allocate coherent memory\n");
return -ENOMEM;
}
pinfo->dp_addr = dp_offset;
pinfo->mem_addr = mem_addr;
pinfo->dma_addr = dma_addr;
pinfo->mem_size = memsz;
pinfo->rx_buf = mem_addr;
pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos
* pinfo->rx_fifosize);
pinfo->rx_bd_base = (volatile cbd_t *)dp_mem;
pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos;
return 0;
}
void __init do_init_bootmem(void)
{
unsigned long i;
unsigned long start, bootmap_pages;
unsigned long total_pages;
int boot_mapsize;
max_pfn = total_pages = lmb_end_of_DRAM() >> PAGE_SHIFT;
#ifdef CONFIG_HIGHMEM
total_pages = total_lowmem >> PAGE_SHIFT;
#endif
/*
* Find an area to use for the bootmem bitmap. Calculate the size of
* bitmap required as (Total Memory) / PAGE_SIZE / BITS_PER_BYTE.
* Add 1 additional page in case the address isn't page-aligned.
*/
bootmap_pages = bootmem_bootmap_pages(total_pages);
start = lmb_alloc(bootmap_pages << PAGE_SHIFT, PAGE_SIZE);
boot_mapsize = init_bootmem(start >> PAGE_SHIFT, total_pages);
/* Add active regions with valid PFNs */
for (i = 0; i < lmb.memory.cnt; i++) {
unsigned long start_pfn, end_pfn;
start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT;
end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i);
add_active_range(0, start_pfn, end_pfn);
}
/* Add all physical memory to the bootmem map, mark each area
* present.
*/
#ifdef CONFIG_HIGHMEM
free_bootmem_with_active_regions(0, total_lowmem >> PAGE_SHIFT);
#else
free_bootmem_with_active_regions(0, max_pfn);
#endif
/* reserve the sections we're already using */
for (i = 0; i < lmb.reserved.cnt; i++)
reserve_bootmem(lmb.reserved.region[i].base,
lmb_size_bytes(&lmb.reserved, i));
/* XXX need to clip this if using highmem? */
sparse_memory_present_with_active_regions(0);
init_bootmem_done = 1;
}
void __init do_init_bootmem(void)
{
unsigned long i;
unsigned long start, bootmap_pages;
unsigned long total_pages;
int boot_mapsize;
max_pfn = total_pages = lmb_end_of_DRAM() >> PAGE_SHIFT;
#ifdef CONFIG_HIGHMEM
total_pages = total_lowmem >> PAGE_SHIFT;
#endif
/*
* Find an area to use for the bootmem bitmap. Calculate the size of
* bitmap required as (Total Memory) / PAGE_SIZE / BITS_PER_BYTE.
* Add 1 additional page in case the address isn't page-aligned.
*/
bootmap_pages = bootmem_bootmap_pages(total_pages);
start = lmb_alloc(bootmap_pages << PAGE_SHIFT, PAGE_SIZE);
BUG_ON(!start);
boot_mapsize = init_bootmem(start >> PAGE_SHIFT, total_pages);
/* Add all physical memory to the bootmem map, mark each area
* present.
*/
for (i = 0; i < lmb.memory.cnt; i++) {
unsigned long base = lmb.memory.region[i].base;
unsigned long size = lmb_size_bytes(&lmb.memory, i);
#ifdef CONFIG_HIGHMEM
if (base >= total_lowmem)
continue;
if (base + size > total_lowmem)
size = total_lowmem - base;
#endif
free_bootmem(base, size);
}
/* reserve the sections we're already using */
for (i = 0; i < lmb.reserved.cnt; i++)
reserve_bootmem(lmb.reserved.region[i].base,
lmb_size_bytes(&lmb.reserved, i));
/* XXX need to clip this if using highmem? */
for (i = 0; i < lmb.memory.cnt; i++)
memory_present(0, lmb_start_pfn(&lmb.memory, i),
lmb_end_pfn(&lmb.memory, i));
init_bootmem_done = 1;
}
static void * __init prom_early_alloc(unsigned long size)
{
unsigned long paddr = lmb_alloc(size, SMP_CACHE_BYTES);
void *ret;
if (!paddr) {
prom_printf("prom_early_alloc(%lu) failed\n");
prom_halt();
}
ret = __va(paddr);
memset(ret, 0, size);
prom_early_allocated += size;
return ret;
}
static void __init setup_nonnuma(void)
{
unsigned long top_of_ram = lmb_end_of_DRAM();
unsigned long total_ram = lmb_phys_mem_size();
unsigned long i;
printk(KERN_INFO "Top of RAM: 0x%lx, Total RAM: 0x%lx\n",
top_of_ram, total_ram);
printk(KERN_INFO "Memory hole size: %ldMB\n",
(top_of_ram - total_ram) >> 20);
if (!numa_memory_lookup_table) {
long entries = top_of_ram >> MEMORY_INCREMENT_SHIFT;
numa_memory_lookup_table =
(char *)abs_to_virt(lmb_alloc(entries * sizeof(char), 1));
for (i = 0; i < entries ; i++)
numa_memory_lookup_table[i] = ARRAY_INITIALISER;
}
u64 __init lmb_alloc_nid(u64 size, u64 align, int nid,
u64 (*nid_range)(u64 start, u64 end, int *nid))
{
struct lmb_region *mem = &lmb.memory;
int i;
BUG_ON(0 == size);
size = lmb_align_up(size, align);
for (i = 0; i < mem->cnt; i++) {
u64 ret = lmb_alloc_nid_region(&mem->region[i],
nid_range,
size, align, nid);
if (ret != ~(u64)0)
return ret;
}
return lmb_alloc(size, align);
}
/**
* boot_relocate_fdt - relocate flat device tree
* @lmb: pointer to lmb handle, will be used for memory mgmt
* @of_flat_tree: pointer to a char* variable, will hold fdt start address
* @of_size: pointer to a ulong variable, will hold fdt length
*
* boot_relocate_fdt() allocates a region of memory within the bootmap and
* relocates the of_flat_tree into that region, even if the fdt is already in
* the bootmap. It also expands the size of the fdt by CONFIG_SYS_FDT_PAD
* bytes.
*
* of_flat_tree and of_size are set to final (after relocation) values
*
* returns:
* 0 - success
* 1 - failure
*/
int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size)
{
void *fdt_blob = *of_flat_tree;
void *of_start = NULL;
char *fdt_high;
ulong of_len = 0;
int err;
int disable_relocation = 0;
/* nothing to do */
if (*of_size == 0)
return 0;
if (fdt_check_header(fdt_blob) != 0) {
fdt_error("image is not a fdt");
goto error;
}
/* position on a 4K boundary before the alloc_current */
/* Pad the FDT by a specified amount */
of_len = *of_size + CONFIG_SYS_FDT_PAD;
/* If fdt_high is set use it to select the relocation address */
fdt_high = getenv("fdt_high");
if (fdt_high) {
void *desired_addr = (void *)simple_strtoul(fdt_high, NULL, 16);
if (((ulong) desired_addr) == ~0UL) {
/* All ones means use fdt in place */
of_start = fdt_blob;
lmb_reserve(lmb, (ulong)of_start, of_len);
disable_relocation = 1;
} else if (desired_addr) {
of_start =
(void *)(ulong) lmb_alloc_base(lmb, of_len, 0x1000,
(ulong)desired_addr);
if (of_start == NULL) {
puts("Failed using fdt_high value for Device Tree");
goto error;
}
} else {
of_start =
(void *)(ulong) lmb_alloc(lmb, of_len, 0x1000);
}
} else {
of_start =
(void *)(ulong) lmb_alloc_base(lmb, of_len, 0x1000,
getenv_bootm_mapsize()
+ getenv_bootm_low());
}
if (of_start == NULL) {
puts("device tree - allocation error\n");
goto error;
}
if (disable_relocation) {
/*
* We assume there is space after the existing fdt to use
* for padding
*/
fdt_set_totalsize(of_start, of_len);
printf(" Using Device Tree in place at %p, end %p\n",
of_start, of_start + of_len - 1);
} else {
debug("## device tree at %p ... %p (len=%ld [0x%lX])\n",
fdt_blob, fdt_blob + *of_size - 1, of_len, of_len);
printf(" Loading Device Tree to %p, end %p ... ",
of_start, of_start + of_len - 1);
err = fdt_open_into(fdt_blob, of_start, of_len);
if (err != 0) {
fdt_error("fdt move failed");
goto error;
}
puts("OK\n");
}
*of_flat_tree = of_start;
*of_size = of_len;
set_working_fdt_addr((ulong)*of_flat_tree);
return 0;
error:
return 1;
}
static int __init parse_numa_properties(void)
{
struct device_node *cpu = NULL;
struct device_node *memory = NULL;
int depth;
int max_domain = 0;
long entries = lmb_end_of_DRAM() >> MEMORY_INCREMENT_SHIFT;
unsigned long i;
if (strstr(saved_command_line, "numa=off")) {
printk(KERN_WARNING "NUMA disabled by user\n");
return -1;
}
numa_memory_lookup_table =
(char *)abs_to_virt(lmb_alloc(entries * sizeof(char), 1));
for (i = 0; i < entries ; i++)
numa_memory_lookup_table[i] = ARRAY_INITIALISER;
depth = find_min_common_depth();
printk(KERN_INFO "NUMA associativity depth for CPU/Memory: %d\n", depth);
if (depth < 0)
return depth;
for_each_cpu(i) {
int numa_domain;
cpu = find_cpu_node(i);
if (cpu) {
numa_domain = of_node_numa_domain(cpu, depth);
of_node_put(cpu);
if (numa_domain >= MAX_NUMNODES) {
/*
* POWER4 LPAR uses 0xffff as invalid node,
* dont warn in this case.
*/
if (numa_domain != 0xffff)
printk(KERN_ERR "WARNING: cpu %ld "
"maps to invalid NUMA node %d\n",
i, numa_domain);
numa_domain = 0;
}
} else {
printk(KERN_ERR "WARNING: no NUMA information for "
"cpu %ld\n", i);
numa_domain = 0;
}
node_set_online(numa_domain);
if (max_domain < numa_domain)
max_domain = numa_domain;
map_cpu_to_node(i, numa_domain);
}
memory = NULL;
while ((memory = of_find_node_by_type(memory, "memory")) != NULL) {
unsigned long start;
unsigned long size;
int numa_domain;
int ranges;
unsigned int *memcell_buf;
unsigned int len;
memcell_buf = (unsigned int *)get_property(memory, "reg", &len);
if (!memcell_buf || len <= 0)
continue;
ranges = memory->n_addrs;
new_range:
/* these are order-sensitive, and modify the buffer pointer */
start = read_cell_ul(memory, &memcell_buf);
size = read_cell_ul(memory, &memcell_buf);
start = _ALIGN_DOWN(start, MEMORY_INCREMENT);
size = _ALIGN_UP(size, MEMORY_INCREMENT);
numa_domain = of_node_numa_domain(memory, depth);
if (numa_domain >= MAX_NUMNODES) {
if (numa_domain != 0xffff)
printk(KERN_ERR "WARNING: memory at %lx maps "
"to invalid NUMA node %d\n", start,
numa_domain);
numa_domain = 0;
}
node_set_online(numa_domain);
if (max_domain < numa_domain)
max_domain = numa_domain;
/*
* For backwards compatibility, OF splits the first node
* into two regions (the first being 0-4GB). Check for
* this simple case and complain if there is a gap in
* memory
*/
if (node_data[numa_domain].node_spanned_pages) {
unsigned long shouldstart =
node_data[numa_domain].node_start_pfn +
node_data[numa_domain].node_spanned_pages;
if (shouldstart != (start / PAGE_SIZE)) {
printk(KERN_ERR "Hole in node, disabling "
"region start %lx length %lx\n",
start, size);
continue;
}
node_data[numa_domain].node_spanned_pages +=
size / PAGE_SIZE;
} else {
node_data[numa_domain].node_start_pfn =
start / PAGE_SIZE;
node_data[numa_domain].node_spanned_pages =
size / PAGE_SIZE;
}
for (i = start ; i < (start+size); i += MEMORY_INCREMENT)
numa_memory_lookup_table[i >> MEMORY_INCREMENT_SHIFT] =
numa_domain;
dbg("memory region %lx to %lx maps to domain %d\n",
start, start+size, numa_domain);
ranges--;
if (ranges)
goto new_range;
}
numnodes = max_domain + 1;
return 0;
}
/**
* boot_ramdisk_high - relocate init ramdisk
* @lmb: pointer to lmb handle, will be used for memory mgmt
* @rd_data: ramdisk data start address
* @rd_len: ramdisk data length
* @initrd_start: pointer to a ulong variable, will hold final init ramdisk
* start address (after possible relocation)
* @initrd_end: pointer to a ulong variable, will hold final init ramdisk
* end address (after possible relocation)
*
* boot_ramdisk_high() takes a relocation hint from "initrd_high" environment
* variable and if requested ramdisk data is moved to a specified location.
*
* Initrd_start and initrd_end are set to final (after relocation) ramdisk
* start/end addresses if ramdisk image start and len were provided,
* otherwise set initrd_start and initrd_end set to zeros.
*
* returns:
* 0 - success
* -1 - failure
*/
int boot_ramdisk_high(struct lmb *lmb, ulong rd_data, ulong rd_len,
ulong *initrd_start, ulong *initrd_end)
{
char *s;
ulong initrd_high;
int initrd_copy_to_ram = 1;
if ((s = getenv("initrd_high")) != NULL) {
/* a value of "no" or a similar string will act like 0,
* turning the "load high" feature off. This is intentional.
*/
initrd_high = simple_strtoul(s, NULL, 16);
if (initrd_high == ~0)
initrd_copy_to_ram = 0;
} else {
/* not set, no restrictions to load high */
initrd_high = ~0;
}
#ifdef CONFIG_LOGBUFFER
/* Prevent initrd from overwriting logbuffer */
lmb_reserve(lmb, logbuffer_base() - LOGBUFF_OVERHEAD, LOGBUFF_RESERVE);
#endif
debug("## initrd_high = 0x%08lx, copy_to_ram = %d\n",
initrd_high, initrd_copy_to_ram);
if (rd_data) {
if (!initrd_copy_to_ram) { /* zero-copy ramdisk support */
debug(" in-place initrd\n");
*initrd_start = rd_data;
*initrd_end = rd_data + rd_len;
lmb_reserve(lmb, rd_data, rd_len);
} else {
if (initrd_high)
*initrd_start = (ulong)lmb_alloc_base(lmb,
rd_len, 0x1000, initrd_high);
else
*initrd_start = (ulong)lmb_alloc(lmb, rd_len,
0x1000);
if (*initrd_start == 0) {
puts("ramdisk - allocation error\n");
goto error;
}
bootstage_mark(BOOTSTAGE_ID_COPY_RAMDISK);
*initrd_end = *initrd_start + rd_len;
printf(" Loading Ramdisk to %08lx, end %08lx ... ",
*initrd_start, *initrd_end);
memmove_wd((void *)*initrd_start,
(void *)rd_data, rd_len, CHUNKSZ);
#ifdef CONFIG_MP
/*
* Ensure the image is flushed to memory to handle
* AMP boot scenarios in which we might not be
* HW cache coherent
*/
flush_cache((unsigned long)*initrd_start, rd_len);
#endif
puts("OK\n");
}
} else {
*initrd_start = 0;
*initrd_end = 0;
}
debug(" ramdisk load start = 0x%08lx, ramdisk load end = 0x%08lx\n",
*initrd_start, *initrd_end);
return 0;
error:
return -1;
}
void
htab_initialize(void)
{
unsigned long table, htab_size_bytes;
unsigned long pteg_count;
unsigned long mode_rw, mask;
#if 0
/* Can't really do the call below since it calls the normal RTAS
* entry point and we're still relocate off at the moment.
* Temporarily diabling until it can call through the relocate off
* RTAS entry point. -Peter
*/
ppc64_boot_msg(0x05, "htab init");
#endif
/*
* Calculate the required size of the htab. We want the number of
* PTEGs to equal one half the number of real pages.
*/
htab_size_bytes = 1UL << naca->pftSize;
pteg_count = htab_size_bytes >> 7;
/* For debug, make the HTAB 1/8 as big as it normally would be. */
ifppcdebug(PPCDBG_HTABSIZE) {
pteg_count >>= 3;
htab_size_bytes = pteg_count << 7;
}
htab_data.htab_num_ptegs = pteg_count;
htab_data.htab_hash_mask = pteg_count - 1;
if(naca->platform == PLATFORM_PSERIES) {
/* Find storage for the HPT. Must be contiguous in
* the absolute address space.
*/
table = lmb_alloc(htab_size_bytes, htab_size_bytes);
if ( !table ) {
ppc64_terminate_msg(0x20, "hpt space");
loop_forever();
}
htab_data.htab = (HPTE *)__a2v(table);
/* htab absolute addr + encoded htabsize */
_SDR1 = table + __ilog2(pteg_count) - 11;
/* Initialize the HPT with no entries */
memset((void *)table, 0, htab_size_bytes);
} else {
/* Using a hypervisor which owns the htab */
htab_data.htab = NULL;
_SDR1 = 0;
}
mode_rw = _PAGE_ACCESSED | _PAGE_COHERENT | PP_RWXX;
mask = pteg_count-1;
/* XXX we currently map kernel text rw, should fix this */
if ((naca->platform & PLATFORM_PSERIES) &&
cpu_has_largepage() && (naca->physicalMemorySize > 256*MB)) {
create_pte_mapping((unsigned long)KERNELBASE,
KERNELBASE + 256*MB, mode_rw, mask, 0);
create_pte_mapping((unsigned long)KERNELBASE + 256*MB,
KERNELBASE + (naca->physicalMemorySize),
mode_rw, mask, 1);
} else {
create_pte_mapping((unsigned long)KERNELBASE,
KERNELBASE+(naca->physicalMemorySize),
mode_rw, mask, 0);
}
#if 0
/* Can't really do the call below since it calls the normal RTAS
* entry point and we're still relocate off at the moment.
* Temporarily diabling until it can call through the relocate off
* RTAS entry point. -Peter
*/
ppc64_boot_msg(0x06, "htab done");
#endif
}
void __init htab_initialize(void)
{
unsigned long table;
unsigned long pteg_count;
unsigned long mode_rw;
unsigned long base = 0, size = 0;
int i;
extern unsigned long tce_alloc_start, tce_alloc_end;
DBG(" -> htab_initialize()\n");
/* Initialize page sizes */
htab_init_page_sizes();
/*
* Calculate the required size of the htab. We want the number of
* PTEGs to equal one half the number of real pages.
*/
htab_size_bytes = htab_get_table_size();
pteg_count = htab_size_bytes >> 7;
htab_hash_mask = pteg_count - 1;
if (firmware_has_feature(FW_FEATURE_LPAR)) {
/* Using a hypervisor which owns the htab */
htab_address = NULL;
_SDR1 = 0;
} else {
/* Find storage for the HPT. Must be contiguous in
* the absolute address space.
*/
table = lmb_alloc(htab_size_bytes, htab_size_bytes);
DBG("Hash table allocated at %lx, size: %lx\n", table,
htab_size_bytes);
htab_address = abs_to_virt(table);
/* htab absolute addr + encoded htabsize */
_SDR1 = table + __ilog2(pteg_count) - 11;
/* Initialize the HPT with no entries */
memset((void *)table, 0, htab_size_bytes);
/* Set SDR1 */
mtspr(SPRN_SDR1, _SDR1);
}
mode_rw = _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX;
/* On U3 based machines, we need to reserve the DART area and
* _NOT_ map it to avoid cache paradoxes as it's remapped non
* cacheable later on
*/
/* create bolted the linear mapping in the hash table */
for (i=0; i < lmb.memory.cnt; i++) {
base = (unsigned long)__va(lmb.memory.region[i].base);
size = lmb.memory.region[i].size;
DBG("creating mapping for region: %lx : %lx\n", base, size);
#ifdef CONFIG_U3_DART
/* Do not map the DART space. Fortunately, it will be aligned
* in such a way that it will not cross two lmb regions and
* will fit within a single 16Mb page.
* The DART space is assumed to be a full 16Mb region even if
* we only use 2Mb of that space. We will use more of it later
* for AGP GART. We have to use a full 16Mb large page.
*/
DBG("DART base: %lx\n", dart_tablebase);
if (dart_tablebase != 0 && dart_tablebase >= base
&& dart_tablebase < (base + size)) {
unsigned long dart_table_end = dart_tablebase + 16 * MB;
if (base != dart_tablebase)
BUG_ON(htab_bolt_mapping(base, dart_tablebase,
__pa(base), mode_rw,
mmu_linear_psize));
if ((base + size) > dart_table_end)
BUG_ON(htab_bolt_mapping(dart_tablebase+16*MB,
base + size,
__pa(dart_table_end),
mode_rw,
mmu_linear_psize));
continue;
}
#endif /* CONFIG_U3_DART */
BUG_ON(htab_bolt_mapping(base, base + size, __pa(base),
mode_rw, mmu_linear_psize));
}
/*
* If we have a memory_limit and we've allocated TCEs then we need to
* explicitly map the TCE area at the top of RAM. We also cope with the
* case that the TCEs start below memory_limit.
* tce_alloc_start/end are 16MB aligned so the mapping should work
* for either 4K or 16MB pages.
*/
if (tce_alloc_start) {
tce_alloc_start = (unsigned long)__va(tce_alloc_start);
tce_alloc_end = (unsigned long)__va(tce_alloc_end);
if (base + size >= tce_alloc_start)
tce_alloc_start = base + size + 1;
BUG_ON(htab_bolt_mapping(tce_alloc_start, tce_alloc_end,
__pa(tce_alloc_start), mode_rw,
mmu_linear_psize));
}
htab_finish_init();
DBG(" <- htab_initialize()\n");
}
