/*
* Prepare the namespace - decide what/where to mount, load ramdisks, etc.
*/
void __init prepare_namespace(void)
{
int is_floppy;
if (root_delay) {
printk(KERN_INFO "Waiting %dsec before mounting root device...\n",
root_delay);
ssleep(root_delay);
}
/*
* wait for the known devices to complete their probing
*
* Note: this is a potential source of long boot delays.
* For example, it is not atypical to wait 5 seconds here
* for the touchpad of a laptop to initialize.
*/
wait_for_device_probe();
md_run_setup();
if (saved_root_name[0]) {
root_device_name = saved_root_name;
printk(KERN_DEBUG "root_device_name: %s\n",root_device_name);
if (!strncmp(root_device_name, "mtd", 3) ||
!strncmp(root_device_name, "ubi", 3)) {
mount_block_root(root_device_name, root_mountflags);
goto out;
}
ROOT_DEV = name_to_dev_t(root_device_name);
if (strncmp(root_device_name, "/dev/", 5) == 0)
root_device_name += 5;
}
if (initrd_load())
goto out;
/* wait for any asynchronous scanning to complete */
if ((ROOT_DEV == 0) && root_wait) {
printk(KERN_INFO "Waiting for root device %s...\n",
saved_root_name);
while (driver_probe_done() != 0 ||
(ROOT_DEV = name_to_dev_t(saved_root_name)) == 0)
msleep(100);
async_synchronize_full();
}
is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
if (is_floppy && rd_doload && rd_load_disk(0))
ROOT_DEV = Root_RAM0;
mount_root();
out:
devtmpfs_mount("dev");
printk(KERN_DEBUG "after devtmpfs_mount\n");
sys_mount(".", "/", NULL, MS_MOVE, NULL);
printk(KERN_DEBUG "after sys_mount\n");
sys_chroot((const char __user __force *)".");
}
void __init mount_root(void)
{
#ifdef CONFIG_ROOT_NFS
if (MAJOR(ROOT_DEV) == UNNAMED_MAJOR) {
if (mount_nfs_root())
return;
printk(KERN_ERR "VFS: Unable to mount root fs via NFS, trying floppy.\n");
ROOT_DEV = Root_FD0;
}
#endif
#ifdef CONFIG_BLK_DEV_FD
if (MAJOR(ROOT_DEV) == FLOPPY_MAJOR) {
/* rd_doload is 2 for a dual initrd/ramload setup */
if (rd_doload==2) {
if (rd_load_disk(1)) {
ROOT_DEV = Root_RAM1;
root_device_name = NULL;
}
} else
change_floppy("root floppy");
}
#endif
create_dev("/dev/root", ROOT_DEV, root_device_name);
mount_block_root("/dev/root", root_mountflags);
}
/*
* Prepare the namespace - decide what/where to mount, load ramdisks, etc.
*/
void __init prepare_namespace(void)
{
int is_floppy;
if (root_delay) {
printk(KERN_INFO "Waiting %dsec before mounting root device...\n",
root_delay);
ssleep(root_delay);
}
/* wait for the known devices to complete their probing */
while (driver_probe_done() != 0)
msleep(100);
md_run_setup();
if (saved_root_name[0]) {
root_device_name = saved_root_name;
if (!strncmp(root_device_name, "mtd", 3) ||
!strncmp(root_device_name, "ubi", 3) ||
!strncmp(root_device_name, "mmc", 3)) {
mount_block_root(root_device_name, root_mountflags);
goto out;
}
ROOT_DEV = name_to_dev_t(root_device_name);
if (strncmp(root_device_name, "/dev/", 5) == 0)
root_device_name += 5;
}
if (initrd_load())
goto out;
/* wait for any asynchronous scanning to complete */
if ((ROOT_DEV == 0) && root_wait) {
printk(KERN_INFO "Waiting for root device %s...\n",
saved_root_name);
while (driver_probe_done() != 0 ||
(ROOT_DEV = name_to_dev_t(saved_root_name)) == 0)
msleep(100);
}
is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
if (is_floppy && rd_doload && rd_load_disk(0))
ROOT_DEV = Root_RAM0;
mount_root();
out:
sys_mount(".", "/", NULL, MS_MOVE, NULL);
sys_chroot(".");
security_sb_post_mountroot();
}
static void __init handle_initrd(void)
{
int error;
int pid;
real_root_dev = new_encode_dev(ROOT_DEV);
create_dev("/dev/root.old", Root_RAM0);
/* mount initrd on rootfs' /root */
mount_block_root("/dev/root.old", root_mountflags & ~MS_RDONLY);
sys_mkdir((const char __user *)"/old", 0700);
root_fd = sys_open((const char __user *)"/", 0, 0);
old_fd = sys_open((const char __user *)"/old", 0, 0);
/* move initrd over / and chdir/chroot in initrd root */
sys_chdir((const char __user *)"/root");
sys_mount((char __user *)".", (char __user *)"/", NULL, MS_MOVE, NULL);
sys_chroot((const char __user *)".");
/*
* In case that a resume from disk is carried out by linuxrc or one of
* its children, we need to tell the freezer not to wait for us.
*/
current->flags |= PF_FREEZER_SKIP;
pid = kernel_thread(do_linuxrc, "/linuxrc", SIGCHLD);
if (pid > 0)
while (pid != sys_wait4(-1, NULL, 0, NULL))
yield();
current->flags &= ~PF_FREEZER_SKIP;
/* move initrd to rootfs' /old */
sys_fchdir(old_fd);
sys_mount((char __user *)"/", (char __user *)".", NULL, MS_MOVE, NULL);
/* switch root and cwd back to / of rootfs */
sys_fchdir(root_fd);
sys_chroot((const char __user *)".");
sys_close(old_fd);
sys_close(root_fd);
if (new_decode_dev(real_root_dev) == Root_RAM0) {
sys_chdir((const char __user *)"/old");
return;
}
ROOT_DEV = new_decode_dev(real_root_dev);
mount_root();
printk(KERN_NOTICE "Trying to move old root to /initrd ... ");
error = sys_mount((char __user *)"/old", (char __user *)"/root/initrd", NULL, MS_MOVE, NULL);
if (!error)
printk("okay\n");
else {
int fd = sys_open((const char __user *)"/dev/root.old", O_RDWR, 0);
if (error == -ENOENT)
printk("/initrd does not exist. Ignored.\n");
else
printk("failed\n");
printk(KERN_NOTICE "Unmounting old root\n");
sys_umount((char __user *)"/old", MNT_DETACH);
printk(KERN_NOTICE "Trying to free ramdisk memory ... ");
if (fd < 0) {
error = fd;
} else {
error = sys_ioctl(fd, BLKFLSBUF, 0);
sys_close(fd);
}
printk(!error ? "okay\n" : "failed\n");
}
}
static int __init mount_nfs_root(void)
{
char *root_dev, *root_data;
unsigned int timeout;
int try, err;
err = nfs_root_data(&root_dev, &root_data);
if (err != 0)
return 0;
/*
* The server or network may not be ready, so try several
* times. Stop after a few tries in case the client wants
* to fall back to other boot methods.
*/
timeout = NFSROOT_TIMEOUT_MIN;
for (try = 1; ; try++) {
err = do_mount_root(root_dev, "nfs",
root_mountflags, root_data);
if (err == 0)
return 1;
if (try > NFSROOT_RETRY_MAX)
break;
/* Wait, in case the server refused us immediately */
ssleep(timeout);
timeout <<= 1;
if (timeout > NFSROOT_TIMEOUT_MAX)
timeout = NFSROOT_TIMEOUT_MAX;
}
return 0;
}
#endif
#if defined(CONFIG_BLK_DEV_RAM) || defined(CONFIG_BLK_DEV_FD)
void __init change_floppy(char *fmt, ...)
{
struct termios termios;
char buf[80];
char c;
int fd;
va_list args;
va_start(args, fmt);
vsprintf(buf, fmt, args);
va_end(args);
fd = sys_open("/dev/root", O_RDWR | O_NDELAY, 0);
if (fd >= 0) {
sys_ioctl(fd, FDEJECT, 0);
sys_close(fd);
}
printk(KERN_NOTICE "VFS: Insert %s and press ENTER\n", buf);
fd = sys_open("/dev/console", O_RDWR, 0);
if (fd >= 0) {
sys_ioctl(fd, TCGETS, (long)&termios);
termios.c_lflag &= ~ICANON;
sys_ioctl(fd, TCSETSF, (long)&termios);
sys_read(fd, &c, 1);
termios.c_lflag |= ICANON;
sys_ioctl(fd, TCSETSF, (long)&termios);
sys_close(fd);
}
}
#endif
void __init mount_root(void)
{
#ifdef CONFIG_ROOT_NFS
if (ROOT_DEV == Root_NFS) {
if (mount_nfs_root())
return;
printk(KERN_ERR "VFS: Unable to mount root fs via NFS, trying floppy.\n");
ROOT_DEV = Root_FD0;
}
#endif
#ifdef CONFIG_BLK_DEV_FD
if (MAJOR(ROOT_DEV) == FLOPPY_MAJOR) {
/* rd_doload is 2 for a dual initrd/ramload setup */
if (rd_doload==2) {
if (rd_load_disk(1)) {
ROOT_DEV = Root_RAM1;
root_device_name = NULL;
}
} else
change_floppy("root floppy");
}
#endif
#ifdef CONFIG_BLOCK
create_dev("/dev/root", ROOT_DEV);
mount_block_root("/dev/root", root_mountflags);
#endif
}
/*
* Prepare the namespace - decide what/where to mount, load ramdisks, etc.
*/
void __init prepare_namespace(void)
{
int is_floppy;
if (root_delay) {
printk(KERN_INFO "Waiting %dsec before mounting root device...\n",
root_delay);
ssleep(root_delay);
}
/*
* wait for the known devices to complete their probing
*
* Note: this is a potential source of long boot delays.
* For example, it is not atypical to wait 5 seconds here
* for the touchpad of a laptop to initialize.
*/
wait_for_device_probe();
md_run_setup();
if (saved_root_name[0]) {
root_device_name = saved_root_name;
if (!strncmp(root_device_name, "mtd", 3) ||
!strncmp(root_device_name, "ubi", 3)) {
mount_block_root(root_device_name, root_mountflags);
goto out;
}
ROOT_DEV = name_to_dev_t(root_device_name);
if (strncmp(root_device_name, "/dev/", 5) == 0)
root_device_name += 5;
}
if (initrd_load())
goto out;
/* wait for any asynchronous scanning to complete */
if ((ROOT_DEV == 0) && root_wait) {
printk(KERN_INFO "Waiting for root device %s...\n",
saved_root_name);
while (driver_probe_done() != 0 ||
(ROOT_DEV = name_to_dev_t(saved_root_name)) == 0)
msleep(100);
async_synchronize_full();
}
is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
if (is_floppy && rd_doload && rd_load_disk(0))
ROOT_DEV = Root_RAM0;
mount_root();
out:
devtmpfs_mount("dev");
sys_mount(".", "/", NULL, MS_MOVE, NULL);
sys_chroot(".");
}
/*
* Prepare the namespace - decide what/where to mount, load ramdisks, etc.
*/
void __init prepare_namespace(void)
{
int is_floppy;
if (root_delay) {
printk(KERN_INFO "Waiting %dsec before mounting root device...\n",
root_delay);
ssleep(root_delay);
}
/*
* wait for the known devices to complete their probing
*
* Note: this is a potential source of long boot delays.
* For example, it is not atypical to wait 5 seconds here
* for the touchpad of a laptop to initialize.
*/
wait_for_device_probe();
md_run_setup();
if (saved_root_name[0]) {
root_device_name = saved_root_name;
if (!strncmp(root_device_name, "mtd", 3) ||
!strncmp(root_device_name, "ubi", 3)) {
mount_block_root(root_device_name, root_mountflags);
goto out;
}
#ifdef CONFIG_RTL_FLASH_DUAL_IMAGE_ENABLE
extern int is_bank2_root(); //extern from rtl_gpio.c
if(is_bank2_root()) //assume bank1 root is mtdblock1 , bank2's root is mtdblock3
strcpy(root_device_name,"/dev/mtdblock3");
#endif
ROOT_DEV = name_to_dev_t(root_device_name);
if (strncmp(root_device_name, "/dev/", 5) == 0)
root_device_name += 5;
}
if (initrd_load())
goto out;
/* wait for any asynchronous scanning to complete */
if ((ROOT_DEV == 0) && root_wait) {
printk(KERN_INFO "Waiting for root device %s...\n",
saved_root_name);
while (driver_probe_done() != 0 ||
(ROOT_DEV = name_to_dev_t(saved_root_name)) == 0)
msleep(100);
async_synchronize_full();
}
is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
if (is_floppy && rd_doload && rd_load_disk(0))
ROOT_DEV = Root_RAM0;
mount_root();
out:
sys_mount(".", "/", NULL, MS_MOVE, NULL);
sys_chroot(".");
}
static void __init handle_initrd(void)
{
int error;
int pid;
real_root_dev = new_encode_dev(ROOT_DEV);
create_dev("/dev/root.old", Root_RAM0);
/* mount initrd on rootfs' /root */
mount_block_root("/dev/root.old", root_mountflags & ~MS_RDONLY);
sys_mkdir("/old", 0700);
root_fd = sys_open("/", 0, 0);
old_fd = sys_open("/old", 0, 0);
/* move initrd over / and chdir/chroot in initrd root */
sys_chdir("/root");
sys_mount(".", "/", NULL, MS_MOVE, NULL);
sys_chroot(".");
pid = kernel_thread(do_linuxrc, "/linuxrc", SIGCHLD);
if (pid > 0) {
while (pid != sys_wait4(-1, NULL, 0, NULL)) {
try_to_freeze();
yield();
}
}
/* move initrd to rootfs' /old */
sys_fchdir(old_fd);
sys_mount("/", ".", NULL, MS_MOVE, NULL);
/* switch root and cwd back to / of rootfs */
sys_fchdir(root_fd);
sys_chroot(".");
sys_close(old_fd);
sys_close(root_fd);
if (new_decode_dev(real_root_dev) == Root_RAM0) {
sys_chdir("/old");
return;
}
ROOT_DEV = new_decode_dev(real_root_dev);
mount_root();
printk(KERN_NOTICE "Trying to move old root to /initrd ... ");
error = sys_mount("/old", "/root/initrd", NULL, MS_MOVE, NULL);
if (!error)
printk("okay\n");
else {
int fd = sys_open("/dev/root.old", O_RDWR, 0);
if (error == -ENOENT)
printk("/initrd does not exist. Ignored.\n");
else
printk("failed\n");
printk(KERN_NOTICE "Unmounting old root\n");
sys_umount("/old", MNT_DETACH);
printk(KERN_NOTICE "Trying to free ramdisk memory ... ");
if (fd < 0) {
error = fd;
} else {
error = sys_ioctl(fd, BLKFLSBUF, 0);
sys_close(fd);
}
printk(!error ? "okay\n" : "failed\n");
}
}
