void gpio_can_active(int id)
{
int pad;
switch (id) {
case 0:
pad = PAD_CTL_HYS_SCHMITZ | PAD_CTL_PKE_ENABLE | \
PAD_CTL_PUE_PUD | PAD_CTL_100K_PU | PAD_CTL_DRV_HIGH;
mxc_request_iomux(MX35_PIN_I2C2_CLK, MUX_CONFIG_ALT1);
mxc_request_iomux(MX35_PIN_I2C2_DAT, MUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX35_PIN_I2C2_CLK, pad);
mxc_iomux_set_pad(MX35_PIN_I2C2_DAT, pad);
mxc_iomux_set_input(MUX_IN_CAN1_CANRX, INPUT_CTL_PATH0);
break;
case 1:
pad = PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU;
mxc_request_iomux(MX35_PIN_FEC_MDC, MUX_CONFIG_ALT1);
mxc_request_iomux(MX35_PIN_FEC_MDIO, MUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX35_PIN_FEC_MDC, pad);
mxc_iomux_set_pad(MX35_PIN_FEC_MDIO, pad);
mxc_iomux_set_input(MUX_IN_CAN2_CANRX, INPUT_CTL_PATH2);
break;
default:
printk(KERN_ERR "NO such device\n");
}
}
/*!
* Setup GPIO for an I2C device to be active
*
* @param i2c_num an I2C device
*/
void gpio_i2c_active(int i2c_num)
{
iomux_pad_config_t regval = 0;
switch (i2c_num) {
case 0:
/* fuel gauge and rtc */
mxc_request_iomux(MX37_PIN_I2C1_CLK, IOMUX_CONFIG_ALT4);
mxc_set_gpio_direction(MX37_PIN_I2C1_CLK, 0);
mxc_set_gpio_dataout(MX37_PIN_I2C1_CLK, 0);
mxc_request_iomux(MX37_PIN_I2C1_DAT, IOMUX_CONFIG_ALT4);
mxc_set_gpio_direction(MX37_PIN_I2C1_DAT, 0);
mxc_set_gpio_dataout(MX37_PIN_I2C1_DAT, 0);
/* select I2C1_SCK as daisy chain input */
mxc_request_iomux(MX37_PIN_I2C1_CLK, IOMUX_CONFIG_ALT0);
mxc_iomux_set_input(MUX_IN_I2C1_SCL, INPUT_CTL_PATH1);
/* OpenDrain enabled, 100k PU enabled */
regval =
PAD_CTL_ODE_OPENDRAIN_ENABLE | PAD_CTL_100K_PU |
PAD_CTL_PKE_ENABLE;
mxc_iomux_set_pad(MX37_PIN_I2C1_CLK, regval);
/*select I2C1_SDA as daisy chain input */
mxc_request_iomux(MX37_PIN_I2C1_DAT, IOMUX_CONFIG_ALT0);
mxc_iomux_set_input(MUX_IN_I2C1_SDA, INPUT_CTL_PATH1);
mxc_iomux_set_pad(MX37_PIN_I2C1_DAT, regval);
mxc_iomux_set_pad(MX37_PIN_GRP_H3, PAD_CTL_HYS_ENABLE);
break;
case 1:
mxc_request_iomux(MX37_PIN_GPIO1_0, IOMUX_CONFIG_ALT0);
mxc_set_gpio_direction(MX37_PIN_GPIO1_0, 0);
mxc_set_gpio_dataout(MX37_PIN_GPIO1_0, 0);
mxc_request_iomux(MX37_PIN_GPIO1_1, IOMUX_CONFIG_ALT0);
mxc_set_gpio_direction(MX37_PIN_GPIO1_1, 0);
mxc_set_gpio_dataout(MX37_PIN_GPIO1_1, 0);
/*select I2C2_SCL as daisy chain input */
mxc_iomux_set_input(MUX_IN_I2C2_SCL, INPUT_CTL_PATH1);
regval = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
PAD_CTL_PUE_PULL | PAD_CTL_100K_PU |
PAD_CTL_ODE_OPENDRAIN_ENABLE | PAD_CTL_DRV_HIGH;
mxc_iomux_set_pad(MX37_PIN_GPIO1_0, regval);
mxc_request_iomux(MX37_PIN_GPIO1_0,
(IOMUX_CONFIG_SION | IOMUX_CONFIG_ALT2));
/*select I2C2_SDA as daisy chain input */
mxc_iomux_set_input(MUX_IN_I2C2_SDA, INPUT_CTL_PATH1);
mxc_iomux_set_pad(MX37_PIN_GPIO1_1, regval);
mxc_request_iomux(MX37_PIN_GPIO1_1,
(IOMUX_CONFIG_SION | IOMUX_CONFIG_ALT2));
break;
case 2:
break;
default:
break;
}
}
/*!
* Setup GPIO for a UART port to be active
*
* @param port a UART port
* @param no_irda indicates if the port is used for SIR
*/
void gpio_uart_active(int port, int no_irda)
{
/*
* Configure the IOMUX control registers for the UART signals
*/
switch (port) {
/* UART 1 IOMUX Configs */
case 0:
mxc_request_iomux(MX35_PIN_RXD1, MUX_CONFIG_FUNC);
mxc_request_iomux(MX35_PIN_TXD1, MUX_CONFIG_FUNC);
mxc_request_iomux(MX35_PIN_RTS1, MUX_CONFIG_FUNC);
mxc_request_iomux(MX35_PIN_CTS1, MUX_CONFIG_FUNC);
mxc_iomux_set_pad(MX35_PIN_RXD1,
PAD_CTL_HYS_SCHMITZ | PAD_CTL_PKE_ENABLE |
PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
mxc_iomux_set_pad(MX35_PIN_TXD1,
PAD_CTL_PUE_PUD | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX35_PIN_RTS1,
PAD_CTL_HYS_SCHMITZ | PAD_CTL_PKE_ENABLE |
PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
mxc_iomux_set_pad(MX35_PIN_CTS1,
PAD_CTL_PUE_PUD | PAD_CTL_100K_PD);
break;
/* UART 2 IOMUX Configs */
case 1:
mxc_request_iomux(MX35_PIN_TXD2, MUX_CONFIG_FUNC);
mxc_request_iomux(MX35_PIN_RXD2, MUX_CONFIG_FUNC);
mxc_request_iomux(MX35_PIN_RTS2, MUX_CONFIG_FUNC);
mxc_request_iomux(MX35_PIN_CTS2, MUX_CONFIG_FUNC);
mxc_iomux_set_pad(MX35_PIN_RXD2,
PAD_CTL_HYS_SCHMITZ | PAD_CTL_PKE_ENABLE |
PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
mxc_iomux_set_pad(MX35_PIN_TXD2,
PAD_CTL_PUE_PUD | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX35_PIN_RTS2,
PAD_CTL_HYS_SCHMITZ | PAD_CTL_PKE_ENABLE |
PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
mxc_iomux_set_pad(MX35_PIN_CTS2,
PAD_CTL_PUE_PUD | PAD_CTL_100K_PD);
break;
/* UART 3 IOMUX Configs */
case 2:
mxc_request_iomux(MX35_PIN_FEC_TX_CLK, MUX_CONFIG_ALT2);
mxc_request_iomux(MX35_PIN_FEC_RX_CLK, MUX_CONFIG_ALT2);
mxc_request_iomux(MX35_PIN_FEC_COL, MUX_CONFIG_ALT2);
mxc_request_iomux(MX35_PIN_FEC_RX_DV, MUX_CONFIG_ALT2);
mxc_iomux_set_input(MUX_IN_UART3_UART_RTS_B, INPUT_CTL_PATH2);
mxc_iomux_set_input(MUX_IN_UART3_UART_RXD_MUX, INPUT_CTL_PATH3);
break;
default:
break;
}
}
/* workaround for ecspi chipselect pin may not keep correct level when idle */
void mx53_evk_gpio_spi_chipselect_active(int cspi_mode, int status,
int chipselect)
{
switch (cspi_mode) {
case 1:
switch (chipselect) {
case 0x1:
/* de-select SS1 of instance: ecspi1. */
mxc_request_iomux(MX53_PIN_EIM_D19, IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX53_PIN_EIM_D19,
PAD_CTL_HYS_ENABLE |
PAD_CTL_PKE_ENABLE |
PAD_CTL_PUE_PULL |
PAD_CTL_100K_PU |
PAD_CTL_DRV_HIGH);
/* mux mode: ALT4 mux port: SS0 of instance: ecspi1. */
mxc_request_iomux(MX53_PIN_EIM_EB2, IOMUX_CONFIG_ALT4);
mxc_iomux_set_pad(MX53_PIN_EIM_EB2,
PAD_CTL_HYS_ENABLE |
PAD_CTL_DRV_HIGH);
mxc_iomux_set_input(
MUX_IN_ECSPI1_IPP_IND_SS_B_1_SELECT_INPUT,
INPUT_CTL_PATH3);
break;
case 0x2:
/* de-select SS0 of instance: ecspi1. */
mxc_request_iomux(MX53_PIN_EIM_EB2, IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX53_PIN_EIM_EB2,
PAD_CTL_HYS_ENABLE |
PAD_CTL_PKE_ENABLE |
PAD_CTL_PUE_PULL |
PAD_CTL_100K_PU |
PAD_CTL_DRV_HIGH);
mxc_request_iomux(MX53_PIN_EIM_D19, IOMUX_CONFIG_ALT4);
mxc_iomux_set_pad(MX53_PIN_EIM_D19,
PAD_CTL_HYS_ENABLE |
PAD_CTL_DRV_HIGH);
mxc_iomux_set_input(
MUX_IN_ECSPI1_IPP_IND_SS_B_1_SELECT_INPUT,
INPUT_CTL_PATH3);
break;
default:
break;
}
break;
case 2:
break;
case 3:
break;
default:
break;
}
}
static void setup_i2c(unsigned int port_number)
{
switch (port_number) {
case 0:
/* i2c1 SDA */
mxc_request_iomux(MX53_PIN_CSI0_D8,
IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION);
mxc_iomux_set_input(MX53_I2C1_IPP_SDA_IN_SELECT_INPUT,
INPUT_CTL_PATH0);
mxc_iomux_set_pad(MX53_PIN_CSI0_D8,
PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE |
PAD_CTL_ODE_OPENDRAIN_ENABLE);
/* i2c1 SCL */
mxc_request_iomux(MX53_PIN_CSI0_D9,
IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION);
mxc_iomux_set_input(MX53_I2C1_IPP_SCL_IN_SELECT_INPUT,
INPUT_CTL_PATH0);
mxc_iomux_set_pad(MX53_PIN_CSI0_D9,
PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE |
PAD_CTL_ODE_OPENDRAIN_ENABLE);
break;
case 1:
/* i2c2 SDA */
mxc_request_iomux(MX53_PIN_KEY_ROW3,
IOMUX_CONFIG_ALT4 | IOMUX_CONFIG_SION);
mxc_iomux_set_input(MX53_I2C2_IPP_SDA_IN_SELECT_INPUT,
INPUT_CTL_PATH0);
mxc_iomux_set_pad(MX53_PIN_KEY_ROW3,
PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE |
PAD_CTL_ODE_OPENDRAIN_ENABLE);
/* i2c2 SCL */
mxc_request_iomux(MX53_PIN_KEY_COL3,
IOMUX_CONFIG_ALT4 | IOMUX_CONFIG_SION);
mxc_iomux_set_input(MX53_I2C2_IPP_SCL_IN_SELECT_INPUT,
INPUT_CTL_PATH0);
mxc_iomux_set_pad(MX53_PIN_KEY_COL3,
PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE |
PAD_CTL_ODE_OPENDRAIN_ENABLE);
break;
default:
printf("Warning: Wrong I2C port number\n");
break;
}
}
void gpio_can_inactive(int id)
{
switch (id) {
case 0:
mxc_free_iomux(MX35_PIN_I2C2_CLK, MUX_CONFIG_ALT1);
mxc_free_iomux(MX35_PIN_I2C2_DAT, MUX_CONFIG_ALT1);
mxc_iomux_set_input(MUX_IN_CAN1_CANRX, INPUT_CTL_PATH0);
break;
case 1:
mxc_free_iomux(MX35_PIN_FEC_MDC, MUX_CONFIG_ALT1);
mxc_free_iomux(MX35_PIN_FEC_MDIO, MUX_CONFIG_ALT1);
mxc_iomux_set_input(MUX_IN_CAN2_CANRX, INPUT_CTL_PATH0);
break;
default:
printk(KERN_ERR "NO such device\n");
}
}
/*!
* Setup GPIO for a UART port to be inactive
*
* @param port a UART port
* @param no_irda indicates if the port is used for SIR
*/
void gpio_uart_inactive(int port, int no_irda)
{
switch (port) {
case 0:
mxc_request_gpio(MX35_PIN_RXD1);
mxc_request_gpio(MX35_PIN_TXD1);
mxc_request_gpio(MX35_PIN_RTS1);
mxc_request_gpio(MX35_PIN_CTS1);
mxc_free_iomux(MX35_PIN_RXD1, MUX_CONFIG_GPIO);
mxc_free_iomux(MX35_PIN_TXD1, MUX_CONFIG_GPIO);
mxc_free_iomux(MX35_PIN_RTS1, MUX_CONFIG_GPIO);
mxc_free_iomux(MX35_PIN_CTS1, MUX_CONFIG_GPIO);
break;
case 1:
mxc_request_gpio(MX35_PIN_RXD2);
mxc_request_gpio(MX35_PIN_TXD2);
mxc_request_gpio(MX35_PIN_RTS2);
mxc_request_gpio(MX35_PIN_CTS2);
mxc_free_iomux(MX35_PIN_RXD2, MUX_CONFIG_GPIO);
mxc_free_iomux(MX35_PIN_TXD2, MUX_CONFIG_GPIO);
mxc_free_iomux(MX35_PIN_RTS2, MUX_CONFIG_GPIO);
mxc_free_iomux(MX35_PIN_CTS2, MUX_CONFIG_GPIO);
break;
case 2:
mxc_request_gpio(MX35_PIN_FEC_TX_CLK);
mxc_request_gpio(MX35_PIN_FEC_RX_CLK);
mxc_request_gpio(MX35_PIN_FEC_COL);
mxc_request_gpio(MX35_PIN_FEC_RX_DV);
mxc_free_iomux(MX35_PIN_FEC_TX_CLK, MUX_CONFIG_GPIO);
mxc_free_iomux(MX35_PIN_FEC_RX_CLK, MUX_CONFIG_GPIO);
mxc_free_iomux(MX35_PIN_FEC_COL, MUX_CONFIG_GPIO);
mxc_free_iomux(MX35_PIN_FEC_RX_DV, MUX_CONFIG_GPIO);
mxc_iomux_set_input(MUX_IN_UART3_UART_RTS_B, INPUT_CTL_PATH0);
mxc_iomux_set_input(MUX_IN_UART3_UART_RXD_MUX, INPUT_CTL_PATH0);
break;
default:
break;
}
}
/*
* USB Host2
*/
int gpio_usbh2_active(void)
{
mxc_request_iomux(MX35_PIN_I2C2_CLK, MUX_CONFIG_ALT2);
mxc_iomux_set_pad(MX35_PIN_I2C2_CLK, 0x0040);
mxc_request_iomux(MX35_PIN_I2C2_DAT, MUX_CONFIG_ALT2);
mxc_iomux_set_input(MUX_IN_USB_UH2_USB_OC, INPUT_CTL_PATH0);
mxc_iomux_set_pad(MX35_PIN_I2C2_DAT, 0x01c0);
return 0;
}
static void setup_iomux_fec(void)
{
/*FEC_MDIO*/
mxc_request_iomux(MX53_PIN_FEC_MDIO, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX53_PIN_FEC_MDIO,
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
PAD_CTL_22K_PU | PAD_CTL_ODE_OPENDRAIN_ENABLE);
mxc_iomux_set_input(MX53_FEC_FEC_MDI_SELECT_INPUT, 0x1);
/*FEC_MDC*/
mxc_request_iomux(MX53_PIN_FEC_MDC, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX53_PIN_FEC_MDC, PAD_CTL_DRV_HIGH);
/* FEC RXD1 */
mxc_request_iomux(MX53_PIN_FEC_RXD1, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX53_PIN_FEC_RXD1,
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
/* FEC RXD0 */
mxc_request_iomux(MX53_PIN_FEC_RXD0, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX53_PIN_FEC_RXD0,
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
/* FEC TXD1 */
mxc_request_iomux(MX53_PIN_FEC_TXD1, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX53_PIN_FEC_TXD1, PAD_CTL_DRV_HIGH);
/* FEC TXD0 */
mxc_request_iomux(MX53_PIN_FEC_TXD0, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX53_PIN_FEC_TXD0, PAD_CTL_DRV_HIGH);
/* FEC TX_EN */
mxc_request_iomux(MX53_PIN_FEC_TX_EN, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX53_PIN_FEC_TX_EN, PAD_CTL_DRV_HIGH);
/* FEC TX_CLK */
mxc_request_iomux(MX53_PIN_FEC_REF_CLK, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX53_PIN_FEC_REF_CLK,
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
/* FEC RX_ER */
mxc_request_iomux(MX53_PIN_FEC_RX_ER, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX53_PIN_FEC_RX_ER,
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
/* FEC CRS */
mxc_request_iomux(MX53_PIN_FEC_CRS_DV, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX53_PIN_FEC_CRS_DV,
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
}
static void setup_iomux_i2c(void)
{
/* I2C1 SDA */
mxc_request_iomux(MX53_PIN_CSI0_D8,
IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION);
mxc_iomux_set_input(MX53_I2C1_IPP_SDA_IN_SELECT_INPUT,
INPUT_CTL_PATH0);
mxc_iomux_set_pad(MX53_PIN_CSI0_D8,
PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
PAD_CTL_100K_PU | PAD_CTL_PKE_ENABLE |
PAD_CTL_PUE_PULL |
PAD_CTL_ODE_OPENDRAIN_ENABLE);
/* I2C1 SCL */
mxc_request_iomux(MX53_PIN_CSI0_D9,
IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION);
mxc_iomux_set_input(MX53_I2C1_IPP_SCL_IN_SELECT_INPUT,
INPUT_CTL_PATH0);
mxc_iomux_set_pad(MX53_PIN_CSI0_D9,
PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
PAD_CTL_100K_PU | PAD_CTL_PKE_ENABLE |
PAD_CTL_PUE_PULL |
PAD_CTL_ODE_OPENDRAIN_ENABLE);
}
/*
* USB Host2
*/
int gpio_usbh2_active(void)
{
if (board_is_mx35(BOARD_REV_2)) {
/* MUX3_CTR to be low for USB Host2 DP&DM */
pmic_gpio_set_bit_val(MCU_GPIO_REG_GPIO_CONTROL_2, 6, 0);
/* CAN_PWDN to be high for USB Host2 Power&OC */
pmic_gpio_set_bit_val(MCU_GPIO_REG_GPIO_CONTROL_2, 1, 1);
}
mxc_request_iomux(MX35_PIN_I2C2_CLK, MUX_CONFIG_ALT2);
mxc_iomux_set_pad(MX35_PIN_I2C2_CLK, 0x0040);
mxc_request_iomux(MX35_PIN_I2C2_DAT, MUX_CONFIG_ALT2);
mxc_iomux_set_input(MUX_IN_USB_UH2_USB_OC, INPUT_CTL_PATH0);
mxc_iomux_set_pad(MX35_PIN_I2C2_DAT, 0x01c0);
return 0;
}
static void setup_iomux_uart(void)
{
/* UART1 RXD */
mxc_request_iomux(MX53_PIN_ATA_DMACK, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX53_PIN_ATA_DMACK,
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU |
PAD_CTL_ODE_OPENDRAIN_ENABLE);
mxc_iomux_set_input(MX53_UART1_IPP_UART_RXD_MUX_SELECT_INPUT, 0x3);
/* UART1 TXD */
mxc_request_iomux(MX53_PIN_ATA_DIOW, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX53_PIN_ATA_DIOW,
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU |
PAD_CTL_ODE_OPENDRAIN_ENABLE);
}
void lcd_iomux(void)
{
/* DI2_PIN15 */
mxc_request_iomux(MX51_PIN_DI_GP4, IOMUX_CONFIG_ALT4);
/* Pad settings for MX51_PIN_DI2_DISP_CLK */
mxc_iomux_set_pad(MX51_PIN_DI2_DISP_CLK, PAD_CTL_HYS_NONE |
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
PAD_CTL_DRV_MAX | PAD_CTL_SRE_SLOW);
/* Turn on 3.3V voltage for LCD */
mxc_request_iomux(MX51_PIN_CSI2_D12, IOMUX_CONFIG_ALT3);
gpio_direction_output(MX51EVK_LCD_3V3, 1);
/* Turn on 5V voltage for LCD */
mxc_request_iomux(MX51_PIN_CSI2_D13, IOMUX_CONFIG_ALT3);
gpio_direction_output(MX51EVK_LCD_5V, 1);
/* Turn on GPIO backlight */
mxc_request_iomux(MX51_PIN_DI1_D1_CS, IOMUX_CONFIG_ALT4);
mxc_iomux_set_input(MX51_GPIO3_IPP_IND_G_IN_4_SELECT_INPUT,
INPUT_CTL_PATH1);
gpio_direction_output(MX51EVK_LCD_BACKLIGHT, 1);
}
void __init mx50_yoshi_io_init(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(mxc_iomux_pins); i++) {
mxc_request_iomux(mxc_iomux_pins[i].pin,
mxc_iomux_pins[i].mux_mode);
if (mxc_iomux_pins[i].pad_cfg)
mxc_iomux_set_pad(mxc_iomux_pins[i].pin,
mxc_iomux_pins[i].pad_cfg);
if (mxc_iomux_pins[i].in_select)
mxc_iomux_set_input(mxc_iomux_pins[i].in_select,
mxc_iomux_pins[i].in_mode);
}
/* SD4 CD */
gpio_request(IOMUX_TO_GPIO(MX50_PIN_DISP_D15), "sd4_cd");
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_DISP_D15));
/* SD4 WP */
gpio_request(IOMUX_TO_GPIO(MX50_PIN_DISP_D14), "sd4_wp");
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_DISP_D14));
/* PMIC Interrupt */
gpio_request(IOMUX_TO_GPIO(MX50_PIN_UART1_CTS), "pmic_int");
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_UART1_CTS));
/* WiFi Power */
gpio_request(IOMUX_TO_GPIO(MX50_PIN_SD3_WP), "sd3_wp");
gpio_direction_output(IOMUX_TO_GPIO(MX50_PIN_SD3_WP), 0);
gpio_set_value(IOMUX_TO_GPIO(MX50_PIN_SD3_WP), 1);
/* WiFi spec, add delay */
mdelay(40);
gpio_request(IOMUX_TO_GPIO(MX50_PIN_SSI_RXC), "gp5_6");
gpio_direction_output(IOMUX_TO_GPIO(MX50_PIN_SSI_RXC), 0);
gpio_set_value(IOMUX_TO_GPIO(MX50_PIN_SSI_RXC), 1);
gpio_request(IOMUX_TO_GPIO(MX50_PIN_EPDC_VCOM0), "epdc_vcom");
gpio_direction_output(IOMUX_TO_GPIO(MX50_PIN_EPDC_VCOM0), 0);
gpio_request(IOMUX_TO_GPIO(MX50_PIN_EPDC_PWRSTAT), "epdc_pwrstat");
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_EPDC_PWRSTAT));
gpio_request(IOMUX_TO_GPIO(MX50_PIN_EPDC_PWRCOM), "epdc_pwrcom");
gpio_direction_output(IOMUX_TO_GPIO(MX50_PIN_EPDC_PWRCOM), 0);
gpio_request(IOMUX_TO_GPIO(MX50_PIN_EPDC_PWRCTRL0), "epdc_pwrctrl0");
gpio_direction_output(IOMUX_TO_GPIO(MX50_PIN_EPDC_PWRCTRL0), 0);
gpio_set_value(IOMUX_TO_GPIO(MX50_PIN_EPDC_PWRCTRL0), 1);
gpio_request(IOMUX_TO_GPIO(MX50_PIN_EPDC_PWRCTRL1), "epdc_pwrctrl1");
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_EPDC_PWRCTRL1));
gpio_request(IOMUX_TO_GPIO(MX50_PIN_EIM_DA4), "eim_da4");
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_EIM_DA4));
gpio_request(IOMUX_TO_GPIO(MX50_PIN_OWIRE), "owire");
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_OWIRE));
gpio_direction_output(IOMUX_TO_GPIO(MX50_PIN_DISP_CS), 0);
gpio_set_value(IOMUX_TO_GPIO(MX50_PIN_DISP_CS), 0);
mdelay(10);
gpio_set_value(IOMUX_TO_GPIO(MX50_PIN_DISP_CS), 1);
/* EIM_DA10 and EIM_DA11 */
gpio_direction_output(IOMUX_TO_GPIO(MX50_PIN_EIM_DA11), 0);
gpio_set_value(IOMUX_TO_GPIO(MX50_PIN_EIM_DA11), 0);
gpio_direction_output(IOMUX_TO_GPIO(MX50_PIN_EIM_DA12), 0);
gpio_set_value(IOMUX_TO_GPIO(MX50_PIN_EIM_DA12), 0);
gpio_request(IOMUX_TO_GPIO(MX50_PIN_SD1_D2), "sd1_d2");
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_SD1_D2));
gpio_request(IOMUX_TO_GPIO(MX50_PIN_SD1_CLK), "sd1_clk");
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_SD1_CLK));
/* EPDC */
gpio_request(IOMUX_TO_GPIO(MX50_PIN_EPDC_SDCE0), "epdc_sdce0");
gpio_direction_output(IOMUX_TO_GPIO(MX50_PIN_EPDC_SDCE0), 0);
gpio_request(IOMUX_TO_GPIO(MX50_PIN_EPDC_GDSP), "epdc_gdsp");
gpio_direction_output(IOMUX_TO_GPIO(MX50_PIN_EPDC_GDSP), 0);
/* Accessory power good */
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_EIM_DA13));
/* Accessory charging */
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_EIM_DA14));
mxc_free_iomux(MX50_PIN_UART4_TXD, IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX50_PIN_UART4_TXD, IOMUX_CONFIG_ALT1);
gpio_request(IOMUX_TO_GPIO(MX50_PIN_UART4_TXD), "uart4_txd");
gpio_direction_output(IOMUX_TO_GPIO(MX50_PIN_UART4_TXD), 0);
gpio_set_value(IOMUX_TO_GPIO(MX50_PIN_UART4_TXD), 0);
/* NAND family - 1.8V */
__raw_writel(0x2000, IO_ADDRESS(IOMUXC_BASE_ADDR) + 0x06c0);
__raw_writel(0x2000, IO_ADDRESS(IOMUXC_BASE_ADDR) + 0x069c);
}
void __init mx51_3stack_io_init(void)
{
int i, num;
struct mxc_iomux_pin_cfg *pin_ptr;
for (i = 0; i < ARRAY_SIZE(mxc_iomux_pins); i++) {
mxc_request_iomux(mxc_iomux_pins[i].pin,
mxc_iomux_pins[i].mux_mode);
if (mxc_iomux_pins[i].pad_cfg)
mxc_iomux_set_pad(mxc_iomux_pins[i].pin,
mxc_iomux_pins[i].pad_cfg);
if (mxc_iomux_pins[i].in_select)
mxc_iomux_set_input(mxc_iomux_pins[i].in_select,
mxc_iomux_pins[i].in_mode);
}
if (enable_ata) {
pin_ptr = ata_iomux_pins;
num = ARRAY_SIZE(ata_iomux_pins);
} else if (enable_sim) {
pin_ptr = sim_iomux_pins;
num = ARRAY_SIZE(sim_iomux_pins);
} else {
pin_ptr = nand_iomux_pins;
num = ARRAY_SIZE(nand_iomux_pins);
}
for (i = 0; i < num; i++) {
mxc_request_iomux(pin_ptr[i].pin, pin_ptr[i].mux_mode);
if (pin_ptr[i].pad_cfg)
mxc_iomux_set_pad(pin_ptr[i].pin, pin_ptr[i].pad_cfg);
if (pin_ptr[i].in_select)
mxc_iomux_set_input(pin_ptr[i].in_select,
pin_ptr[i].in_mode);
}
/* TO3 doesn't need pad to drive CSI_DATA_EN[0] high */
if (cpu_is_mx51_rev(CHIP_REV_3_0) > 0)
mxc_request_iomux(MX51_PIN_EIM_A26, IOMUX_CONFIG_ALT0);
/* Camera low power */
gpio_request(IOMUX_TO_GPIO(MX51_PIN_CSI1_D8), "csi1_d8");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_D8), 0);
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_D8), 0);
gpio_request(IOMUX_TO_GPIO(MX51_PIN_EIM_EB2), "eim_eb2");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_EB2), 0); /* TO1 */
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_EB2), 0); /* TO1 */
/* Camera reset */
gpio_request(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9), "csi1_d9");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9), 0);
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9), 1);
gpio_request(IOMUX_TO_GPIO(MX51_PIN_DI1_D1_CS), "di1_d1_cs");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_DI1_D1_CS), 0);
gpio_request(IOMUX_TO_GPIO(MX51_PIN_GPIO1_0), "gpio1_0");
gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_0)); /* SD1 CD */
gpio_request(IOMUX_TO_GPIO(MX51_PIN_GPIO1_1), "gpio1_1");
gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_1)); /* SD1 WP */
/* EIM_D16 */
/* osc_en is shared by SPDIF */
gpio_request(IOMUX_TO_GPIO(MX51_PIN_EIM_D16), "eim_d16");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_D16), 0);
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_D16), 1);
/* LCD related gpio */
gpio_request(IOMUX_TO_GPIO(MX51_PIN_DI1_D1_CS), "di1_d1_cs");
gpio_request(IOMUX_TO_GPIO(MX51_PIN_DISPB2_SER_DIO), "dispb2_ser_di0");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_DI1_D1_CS), 0);
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_DISPB2_SER_DIO), 0);
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_DISPB2_SER_DIO), 0);
/* GPS related gpio */
gpio_request(IOMUX_TO_GPIO(MX51_PIN_EIM_CS2), "eim_cs2");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_CS2), 0);
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_CS2), 0);
gpio_request(IOMUX_TO_GPIO(MX51_PIN_EIM_CRE), "eim_cre");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_CRE), 0);
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_CRE), 0);
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_CRE), 1);
}
void __init mx51_efikamx_io_init(void)
{
int i, num;
struct mxc_iomux_pin_cfg *pin_ptr;
for (i = 0; i < ARRAY_SIZE(mxc_iomux_pins); i++) {
mxc_request_iomux(mxc_iomux_pins[i].pin,
mxc_iomux_pins[i].mux_mode);
if (mxc_iomux_pins[i].pad_cfg)
mxc_iomux_set_pad(mxc_iomux_pins[i].pin,
mxc_iomux_pins[i].pad_cfg);
if (mxc_iomux_pins[i].in_select)
mxc_iomux_set_input(mxc_iomux_pins[i].in_select,
mxc_iomux_pins[i].in_mode);
}
// enable PATA
pin_ptr = ata_iomux_pins;
num = ARRAY_SIZE(ata_iomux_pins);
for (i = 0; i < num; i++) {
mxc_request_iomux(pin_ptr[i].pin,
pin_ptr[i].mux_mode);
if (pin_ptr[i].pad_cfg)
mxc_iomux_set_pad(pin_ptr[i].pin,
pin_ptr[i].pad_cfg);
if (pin_ptr[i].in_select)
mxc_iomux_set_input(pin_ptr[i].in_select,
pin_ptr[i].in_mode);
}
// WiFi LED
/* mxc_request_iomux(MX51_PIN_CSI1_D9, IOMUX_CONFIG_ALT3); */
gpio_request(IOMUX_TO_GPIO(WLAN_LED_PIN), "wlan_led");
gpio_direction_output(IOMUX_TO_GPIO(WLAN_LED_PIN)/* MX51_PIN_CSI1_D9 */, 0);
gpio_free(IOMUX_TO_GPIO(WLAN_LED_PIN));
// Power On LED
/* mxc_request_iomux(MX51_PIN_CSI1_VSYNC, IOMUX_CONFIG_ALT3); */
gpio_request(IOMUX_TO_GPIO(POWER_LED_PIN), "power_led");
gpio_direction_output(IOMUX_TO_GPIO(POWER_LED_PIN)/* MX51_PIN_CSI1_VSYNC */, 1);
gpio_free(IOMUX_TO_GPIO(POWER_LED_PIN));
// Sleep LED
/* mxc_request_iomux(MX51_PIN_CSI1_HSYNC, IOMUX_CONFIG_ALT3); */
gpio_request(IOMUX_TO_GPIO(SLEEP_LED_PIN), "sleep_led");
gpio_direction_output(IOMUX_TO_GPIO(SLEEP_LED_PIN)/* MX51_PIN_CSI1_HSYNC */, 0);
gpio_free(IOMUX_TO_GPIO(SLEEP_LED_PIN));
// register platform device for LEDs now we fiddled them
(void)platform_device_register(&mx51_efikamx_leds_device);
//ron: USB Hub Reset
mxc_request_iomux(MX51_PIN_GPIO1_5, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_GPIO1_5, PAD_CTL_DRV_HIGH |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
gpio_request(IOMUX_TO_GPIO(MX51_PIN_GPIO1_5), "usb_hub_reset");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_GPIO1_5), 1);
msleep(1);
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_5), 0);
msleep(1);
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_5), 1);
//ron: change PMIC interrupt from GPIO1_8 to GPIO1_6
gpio_request(IOMUX_TO_GPIO(MX51_PIN_GPIO1_6), "pmic_intr");
gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_6));
gpio_request(IOMUX_TO_GPIO(MX51_PIN_GPIO1_0), "sdhc1_cd");
gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_0)); /* SD1 CD */
gpio_request(IOMUX_TO_GPIO(MX51_PIN_GPIO1_8), "sdhc2_cd");
gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_8)); /*ron: SDHC2 CD*/
gpio_request(IOMUX_TO_GPIO(MX51_PIN_GPIO1_1), "sdhc1_wp");
gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_1)); /* SD1 WP */
gpio_request(IOMUX_TO_GPIO(MX51_PIN_GPIO1_7), "sdhc2_wp");
gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_7)); /*ron: SDHC2 WP*/
/* enable BlueTooth */
gpio_request(IOMUX_TO_GPIO(MX51_PIN_EIM_A17), "bluetooth_enable");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_A17), 0);
msleep(10);
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_A17), 1);
/* pull low wlan_on# */
gpio_request(IOMUX_TO_GPIO(MX51_PIN_EIM_A22), "wlan_on");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_A22), 0);
msleep(10);
/* pull low-high pulse wlan_rst# */
gpio_request(IOMUX_TO_GPIO(MX51_PIN_EIM_A16), "wlan_rst");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_A16), 0);
msleep(10);
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_A16), 1);
mxc_free_iomux(MX51_PIN_EIM_A24, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_EIM_A25, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_EIM_D18, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_EIM_D20, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_EIM_D21, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_EIM_D23, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_EIM_D16, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_EIM_D17, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_EIM_D19, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_GPIO1_3, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_EIM_LBA, IOMUX_CONFIG_GPIO);
/* i2c2 SDA */
mxc_request_iomux(MX51_PIN_KEY_COL5,
IOMUX_CONFIG_ALT3 | IOMUX_CONFIG_SION);
mxc_iomux_set_input(MUX_IN_I2C2_IPP_SDA_IN_SELECT_INPUT,
INPUT_CTL_PATH1);
mxc_iomux_set_pad(MX51_PIN_KEY_COL5,
PAD_CTL_SRE_FAST |
PAD_CTL_ODE_OPENDRAIN_ENABLE |
PAD_CTL_DRV_HIGH | PAD_CTL_100K_PU |
PAD_CTL_HYS_ENABLE);
/* i2c2 SCL */
mxc_request_iomux(MX51_PIN_KEY_COL4,
IOMUX_CONFIG_ALT3 | IOMUX_CONFIG_SION);
mxc_iomux_set_input(MUX_IN_I2C2_IPP_SCL_IN_SELECT_INPUT,
INPUT_CTL_PATH1);
mxc_iomux_set_pad(MX51_PIN_KEY_COL4,
PAD_CTL_SRE_FAST |
PAD_CTL_ODE_OPENDRAIN_ENABLE |
PAD_CTL_DRV_HIGH | PAD_CTL_100K_PU |
PAD_CTL_HYS_ENABLE);
/* MX51_PIN_EIM_D27 - De-assert USB PHY RESETB */
mxc_request_iomux(MX51_PIN_EIM_D27, IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX51_PIN_EIM_D27, PAD_CTL_DRV_HIGH |
PAD_CTL_HYS_NONE | PAD_CTL_PUE_KEEPER |
PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_NONE |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
gpio_request(IOMUX_TO_GPIO(MX51_PIN_EIM_D27), "usb_phy_resetb");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_D27), 1);
/* hphone_det_b */
mxc_request_iomux(MX51_PIN_DISPB2_SER_RS, IOMUX_CONFIG_ALT4);
mxc_iomux_set_pad(MX51_PIN_DISPB2_SER_RS, PAD_CTL_100K_PU);
gpio_request(IOMUX_TO_GPIO(MX51_PIN_DISPB2_SER_RS), "hphone_det_b");
gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_DISPB2_SER_RS));
/* audio_clk_en_b */
mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, PAD_CTL_DRV_HIGH |
PAD_CTL_HYS_NONE | PAD_CTL_PUE_KEEPER |
PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_NONE |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
gpio_request(IOMUX_TO_GPIO(MX51_PIN_CSPI1_RDY), "audio_clk_en_b");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSPI1_RDY), 0);
/* Deassert VGA reset to free i2c bus */
gpio_request(IOMUX_TO_GPIO(MX51_PIN_EIM_A19), "vga_reset");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_A19), 1);
/* LCD related gpio */
gpio_request(IOMUX_TO_GPIO(MX51_PIN_DI1_D1_CS), "lcd_gpio");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_DI1_D1_CS), 0);
/* DVI Reset - Assert for i2c disabled mode */
gpio_request(IOMUX_TO_GPIO(MX51_PIN_DISPB2_SER_DIN), "dvi_reset");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_DISPB2_SER_DIN), 0);
/* DVI Power-down */
gpio_request(IOMUX_TO_GPIO(MX51_PIN_DISPB2_SER_DIO), "dvi_power");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_DISPB2_SER_DIO), 1);
//retrieve board id rev1.1: 1,1 rev1.2: 0,1 notice that this cannot be execute too early!
gpio_request(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0), "board_id1");
gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0));
board_id[0] = gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0));
gpio_request(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS1), "board_id2");
gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS1));
board_id[1] = gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS1));
/* Watchdog */
/* board rev1.1: MX51_PIN_DI1_PIN13, rev1.2: MX51_PIN_GPIO1_4 */
gpio_request(IOMUX_TO_GPIO(MX51_PIN_DI1_PIN13), "wdog_rst");
gpio_direction_input(MX51_PIN_DI1_PIN13);
}
/*!
* Setup GPIO for a UART port to be active
*
* @param port a UART port
* @param no_irda indicates if the port is used for SIR
*/
void gpio_uart_active(int port, int no_irda)
{
/*
* Configure the IOMUX control registers for the UART signals
* and enable the UART transceivers
*/
switch (port) {
/* UART 1 IOMUX Configs */
case 0:
mxc_request_iomux(MX37_PIN_UART1_RXD, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX37_PIN_UART1_RXD, PAD_CTL_HYS_ENABLE |
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_PULL |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_iomux_set_input(MUX_IN_UART1_UART_RXD_MUX, INPUT_CTL_PATH4);
mxc_request_iomux(MX37_PIN_UART1_TXD, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX37_PIN_UART1_TXD, PAD_CTL_HYS_ENABLE |
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_PULL |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
#if 0
mxc_request_iomux(MX37_PIN_UART1_RTS, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX37_PIN_UART1_RTS, PAD_CTL_HYS_ENABLE |
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_PULL |
PAD_CTL_DRV_HIGH);
mxc_iomux_set_input(MUX_IN_UART1_UART_RTS_B, INPUT_CTL_PATH4);
mxc_request_iomux(MX37_PIN_UART1_CTS, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX37_PIN_UART1_CTS, PAD_CTL_HYS_ENABLE |
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_PULL |
PAD_CTL_DRV_HIGH);
#endif
break;
case 1:
#if 0 //
mxc_request_iomux(MX37_PIN_UART1_DCD, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX37_PIN_UART1_DCD, PAD_CTL_HYS_ENABLE |
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_PULL |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_iomux_set_input(MUX_IN_UART2_UART_RXD_MUX, INPUT_CTL_PATH1);
mxc_request_iomux(MX37_PIN_UART1_RI, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX37_PIN_UART1_RI, PAD_CTL_HYS_ENABLE |
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_PULL |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_request_iomux(MX37_PIN_UART1_DSR, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX37_PIN_UART1_DSR, PAD_CTL_HYS_ENABLE |
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_PULL |
PAD_CTL_DRV_HIGH);
mxc_iomux_set_input(MUX_IN_UART2_UART_RTS_B, INPUT_CTL_PATH1);
mxc_request_iomux(MX37_PIN_UART1_DTR, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX37_PIN_UART1_DTR, PAD_CTL_HYS_ENABLE |
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_PULL |
PAD_CTL_DRV_HIGH);
#endif
break;
case 2:
#if 0
mxc_iomux_set_input(MUX_IN_UART3_UART_RXD_MUX, INPUT_CTL_PATH0);
mxc_request_iomux(MX37_PIN_AUD3_BB_TXD, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX37_PIN_AUD3_BB_TXD, PAD_CTL_HYS_ENABLE |
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_PULL |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_request_iomux(MX37_PIN_AUD3_BB_RXD, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX37_PIN_AUD3_BB_RXD, PAD_CTL_HYS_ENABLE |
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_PULL |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
#endif
break;
default:
break;
}
}
void __init mx53_evk_io_init(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(mxc_iomux_pins); i++) {
mxc_request_iomux(mxc_iomux_pins[i].pin,
mxc_iomux_pins[i].mux_mode);
if (mxc_iomux_pins[i].pad_cfg)
mxc_iomux_set_pad(mxc_iomux_pins[i].pin,
mxc_iomux_pins[i].pad_cfg);
if (mxc_iomux_pins[i].in_select)
mxc_iomux_set_input(mxc_iomux_pins[i].in_select,
mxc_iomux_pins[i].in_mode);
}
if (board_is_mx53_arm2()) {
/* MX53 ARM2 CPU board */
pr_info("MX53 ARM2 board \n");
for (i = 0; i < ARRAY_SIZE(mx53_arm2_iomux_pins); i++) {
mxc_request_iomux(mx53_arm2_iomux_pins[i].pin,
mx53_arm2_iomux_pins[i].mux_mode);
if (mx53_arm2_iomux_pins[i].pad_cfg)
mxc_iomux_set_pad(mx53_arm2_iomux_pins[i].pin,
mx53_arm2_iomux_pins[i].pad_cfg);
if (mx53_arm2_iomux_pins[i].in_select)
mxc_iomux_set_input(mx53_arm2_iomux_pins[i].in_select,
mx53_arm2_iomux_pins[i].in_mode);
}
/* Config GPIO for OTG VBus */
mxc_iomux_set_pad(MX53_PIN_EIM_D22, PAD_CTL_DRV_HIGH |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
gpio_request(IOMUX_TO_GPIO(MX53_PIN_EIM_D22), "gpio3_22");
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_EIM_D22), 0);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_EIM_D22), 1);
gpio_request(IOMUX_TO_GPIO(MX53_PIN_GPIO_1), "gpio1_1");
gpio_direction_input(IOMUX_TO_GPIO(MX53_PIN_GPIO_1)); /* SD1 CD */
gpio_request(IOMUX_TO_GPIO(MX53_PIN_DI0_PIN4), "gpio4_20");
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_DI0_PIN4), 0);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_DI0_PIN4), 1);
} else {
/* MX53 EVK board */
pr_info("MX53 EVK board \n");
for (i = 0; i < ARRAY_SIZE(mx53_evk_iomux_pins); i++) {
mxc_request_iomux(mx53_evk_iomux_pins[i].pin,
mx53_evk_iomux_pins[i].mux_mode);
if (mx53_evk_iomux_pins[i].pad_cfg)
mxc_iomux_set_pad(mx53_evk_iomux_pins[i].pin,
mx53_evk_iomux_pins[i].pad_cfg);
if (mx53_evk_iomux_pins[i].in_select)
mxc_iomux_set_input(mx53_evk_iomux_pins[i].in_select,
mx53_evk_iomux_pins[i].in_mode);
}
/* Host1 Vbus with GPIO high */
mxc_iomux_set_pad(MX53_PIN_ATA_DA_2, PAD_CTL_DRV_HIGH |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
gpio_request(IOMUX_TO_GPIO(MX53_PIN_ATA_DA_2), "gpio7_8");
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_ATA_DA_2), 1);
/* shutdown the Host1 Vbus when system bring up,
* Vbus will be opened in Host1 driver's probe function */
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_ATA_DA_2), 0);
/* USB HUB RESET - De-assert USB HUB RESET_N */
mxc_iomux_set_pad(MX53_PIN_CSI0_DATA_EN, PAD_CTL_DRV_HIGH |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
gpio_request(IOMUX_TO_GPIO(MX53_PIN_CSI0_DATA_EN), "gpio5_20");
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_CSI0_DATA_EN), 0);
msleep(1);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_CSI0_DATA_EN), 0);
msleep(1);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_CSI0_DATA_EN), 1);
/* Config GPIO for OTG VBus */
mxc_iomux_set_pad(MX53_PIN_EIM_A23, PAD_CTL_DRV_HIGH |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
gpio_request(IOMUX_TO_GPIO(MX53_PIN_EIM_A23), "gpio6_6");
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_EIM_A23), 0);
if (board_is_mx53_evk_a()) /*rev A,"1" disable, "0" enable vbus*/
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_EIM_A23), 1);
else if (board_is_mx53_evk_b()) /* rev B,"0" disable,"1" enable Vbus*/
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_EIM_A23), 0);
gpio_request(IOMUX_TO_GPIO(MX53_PIN_EIM_DA13), "gpio3_13");
gpio_direction_input(IOMUX_TO_GPIO(MX53_PIN_EIM_DA13)); /* SD1 CD */
gpio_request(IOMUX_TO_GPIO(MX53_PIN_EIM_DA14), "gpio3_14");
gpio_direction_input(IOMUX_TO_GPIO(MX53_PIN_EIM_DA14)); /* SD1 WP */
/* SD3 CD */
gpio_request(IOMUX_TO_GPIO(MX53_PIN_EIM_DA11), "gpio3_11");
gpio_direction_input(IOMUX_TO_GPIO(MX53_PIN_EIM_DA11));
/* SD3 WP */
gpio_request(IOMUX_TO_GPIO(MX53_PIN_EIM_DA12), "gpio3_12");
gpio_direction_input(IOMUX_TO_GPIO(MX53_PIN_EIM_DA11));
/* reset FEC PHY */
gpio_request(IOMUX_TO_GPIO(MX53_PIN_ATA_DA_0), "gpio7_6");
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_ATA_DA_0), 0);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_ATA_DA_0), 0);
msleep(1);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_ATA_DA_0), 1);
/* CS42888 reset GPIO */
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_GPIO_12), 0);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_GPIO_12), 0);
}
/* DVI Detect */
gpio_request(IOMUX_TO_GPIO(MX53_PIN_EIM_D31), "gpio3_31");
gpio_direction_input(IOMUX_TO_GPIO(MX53_PIN_EIM_D31));
/* DVI Reset - Assert for i2c disabled mode */
gpio_request(IOMUX_TO_GPIO(MX53_PIN_EIM_WAIT), "gpio5_0");
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_EIM_WAIT), 0);
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_EIM_WAIT), 0);
/* DVI Power-down */
gpio_request(IOMUX_TO_GPIO(MX53_PIN_EIM_D24), "gpio3_24");
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_EIM_D24), 0);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_EIM_D24), 1);
/* DVI I2C enable */
gpio_request(IOMUX_TO_GPIO(MX53_PIN_EIM_D28), "gpio3_28");
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_EIM_D28), 0);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_EIM_D28), 0);
for (i = 0; i < ARRAY_SIZE(nand_iomux_pins); i++) {
mxc_request_iomux(nand_iomux_pins[i].pin,
nand_iomux_pins[i].mux_mode);
if (nand_iomux_pins[i].pad_cfg)
mxc_iomux_set_pad(nand_iomux_pins[i].pin,
nand_iomux_pins[i].pad_cfg);
if (nand_iomux_pins[i].in_select)
mxc_iomux_set_input(nand_iomux_pins[i].in_select,
nand_iomux_pins[i].in_mode);
}
gpio_request(IOMUX_TO_GPIO(MX53_PIN_GPIO_16), "gpio7_11");
gpio_direction_input(IOMUX_TO_GPIO(MX53_PIN_GPIO_16)); /*PMIC_INT*/
/* headphone_det_b */
mxc_request_iomux(MX53_PIN_ATA_DATA5, IOMUX_CONFIG_GPIO);
mxc_iomux_set_pad(MX53_PIN_ATA_DATA5, PAD_CTL_100K_PU);
gpio_request(IOMUX_TO_GPIO(MX53_PIN_ATA_DATA5), "gpio2_5");
gpio_direction_input(IOMUX_TO_GPIO(MX53_PIN_ATA_DATA5));
/* power key */
/* LCD related gpio */
/* Camera reset */
gpio_request(IOMUX_TO_GPIO(MX53_PIN_GPIO_10), "gpio4_0");
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_GPIO_10), 0);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_GPIO_10), 1);
/* TVIN reset */
gpio_request(IOMUX_TO_GPIO(MX53_PIN_CSI0_D7), "gpio5_25");
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_CSI0_D7), 0);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_CSI0_D7), 0);
msleep(5);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_CSI0_D7), 1);
/* CAN1 enable GPIO*/
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_GPIO_18), 0);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_GPIO_18), 0);
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_GPIO_17), 0);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_GPIO_17), 0);
/* CAN2 enable GPIO*/
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_CSI0_D6), 0);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_CSI0_D6), 0);
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_GPIO_14), 0);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_GPIO_14), 0);
if (enable_spdif) {
mxc_free_iomux(MX53_PIN_GPIO_19, IOMUX_CONFIG_ALT1);
mxc_request_iomux(MX53_PIN_GPIO_19, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX53_PIN_GPIO_19,
PAD_CTL_DRV_HIGH | PAD_CTL_HYS_ENABLE |
PAD_CTL_PUE_PULL | PAD_CTL_100K_PU |
PAD_CTL_PKE_ENABLE);
} else {
/* GPIO for CAN 12V */
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_GPIO_19), 0);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_GPIO_19), 0);
}
}
void __init mx51_babbage_io_init(void)
{
int i;
/* Work-around For external USB HUB chip to use default configuration
by reseting hub with i2c lines pulled low */
mxc_request_iomux(MX51_PIN_GPIO1_7, IOMUX_CONFIG_GPIO);
mxc_iomux_set_pad(MX51_PIN_GPIO1_7, PAD_CTL_DRV_HIGH |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
gpio_request(IOMUX_TO_GPIO(MX51_PIN_GPIO1_7), "gpio1_7");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_GPIO1_7), 0);
if (cpu_is_mx51_rev(CHIP_REV_1_1) == 1) {
/* Drive I2C1 SDA line low */
mxc_request_iomux(MX51_PIN_GPIO1_3, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_GPIO1_3, PAD_CTL_DRV_HIGH |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
gpio_request(IOMUX_TO_GPIO(MX51_PIN_GPIO1_3), "gpio1_3");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_GPIO1_3), 0);
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_3), 0);
/* Drive I2C1 SCL line low */
mxc_request_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_GPIO1_2, PAD_CTL_DRV_HIGH |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
gpio_request(IOMUX_TO_GPIO(MX51_PIN_GPIO1_2), "gpio1_2");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_GPIO1_2), 0);
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_2), 0);
msleep(5);
mxc_free_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_GPIO1_3, IOMUX_CONFIG_ALT2);
}
/* USB HUB RESET - De-assert USB HUB RESET_N */
msleep(1);
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_7), 0);
msleep(1);
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_7), 1);
for (i = 0; i < ARRAY_SIZE(mxc_iomux_pins); i++) {
mxc_request_iomux(mxc_iomux_pins[i].pin,
mxc_iomux_pins[i].mux_mode);
if (mxc_iomux_pins[i].pad_cfg)
mxc_iomux_set_pad(mxc_iomux_pins[i].pin,
mxc_iomux_pins[i].pad_cfg);
if (mxc_iomux_pins[i].in_select)
mxc_iomux_set_input(mxc_iomux_pins[i].in_select,
mxc_iomux_pins[i].in_mode);
}
gpio_request(IOMUX_TO_GPIO(MX51_PIN_GPIO1_8), "gpio1_8");
gpio_request(IOMUX_TO_GPIO(MX51_PIN_GPIO1_0), "gpio1_0");
gpio_request(IOMUX_TO_GPIO(MX51_PIN_GPIO1_1), "gpio1_1");
gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_8));
gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_0)); /* SD1 CD */
gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_1)); /* SD1 WP */
if (board_is_rev(BOARD_REV_2)) {
/* SD2 CD for BB2.5 */
gpio_request(IOMUX_TO_GPIO(MX51_PIN_GPIO1_6), "gpio1_6");
gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_6));
} else {
/* SD2 CD for BB2.0 */
gpio_request(IOMUX_TO_GPIO(MX51_PIN_GPIO1_4), "gpio1_4");
gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_4));
}
gpio_request(IOMUX_TO_GPIO(MX51_PIN_GPIO1_5), "gpio1_5");
gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_5)); /* SD2 WP */
/* reset FEC PHY */
gpio_request(IOMUX_TO_GPIO(MX51_PIN_EIM_A20), "eim_a20");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_A20), 0);
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_A20), 0);
msleep(10);
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_A20), 1);
/* reset FM */
gpio_request(IOMUX_TO_GPIO(MX51_PIN_EIM_A21), "eim_a21");
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_A21), 0);
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_A21), 0);
msleep(10);
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_A21), 1);
if (cpu_is_mx51_rev(CHIP_REV_1_1) == 1) {
/* MX51_PIN_EIM_CRE - De-assert USB PHY RESETB */
gpio_request(IOMUX_TO_GPIO(MX51_PIN_EIM_CRE), "eim_cre");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_CRE), 0);
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_CRE), 1);
/* hphone_det_b */
gpio_request(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0), "nandf_cs0");
gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0));
} else {
mxc_free_iomux(MX51_PIN_EIM_D21, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_EIM_A24, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_EIM_A25, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_EIM_D18, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_EIM_D20, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_EIM_D21, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_EIM_D16, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_EIM_D17, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_EIM_D19, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_GPIO1_3, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_EIM_LBA, IOMUX_CONFIG_GPIO);
mxc_free_iomux(MX51_PIN_NANDF_CS0, IOMUX_CONFIG_GPIO);
/* i2c1 SDA */
mxc_request_iomux(MX51_PIN_EIM_D16,
IOMUX_CONFIG_ALT4 | IOMUX_CONFIG_SION);
mxc_iomux_set_input(MUX_IN_I2C1_IPP_SDA_IN_SELECT_INPUT,
INPUT_CTL_PATH0);
mxc_iomux_set_pad(MX51_PIN_EIM_D16, PAD_CTL_SRE_FAST |
PAD_CTL_ODE_OPENDRAIN_ENABLE |
PAD_CTL_DRV_HIGH | PAD_CTL_100K_PU |
PAD_CTL_HYS_ENABLE);
/* i2c1 SCL */
mxc_request_iomux(MX51_PIN_EIM_D19,
IOMUX_CONFIG_ALT4 | IOMUX_CONFIG_SION);
mxc_iomux_set_input(MUX_IN_I2C1_IPP_SCL_IN_SELECT_INPUT,
INPUT_CTL_PATH0);
mxc_iomux_set_pad(MX51_PIN_EIM_D19, PAD_CTL_SRE_FAST |
PAD_CTL_ODE_OPENDRAIN_ENABLE |
PAD_CTL_DRV_HIGH | PAD_CTL_100K_PU |
PAD_CTL_HYS_ENABLE);
/* i2c2 SDA */
mxc_request_iomux(MX51_PIN_KEY_COL5,
IOMUX_CONFIG_ALT3 | IOMUX_CONFIG_SION);
mxc_iomux_set_input(MUX_IN_I2C2_IPP_SDA_IN_SELECT_INPUT,
INPUT_CTL_PATH1);
mxc_iomux_set_pad(MX51_PIN_KEY_COL5,
PAD_CTL_SRE_FAST |
PAD_CTL_ODE_OPENDRAIN_ENABLE |
PAD_CTL_DRV_HIGH | PAD_CTL_100K_PU |
PAD_CTL_HYS_ENABLE);
/* i2c2 SCL */
mxc_request_iomux(MX51_PIN_KEY_COL4,
IOMUX_CONFIG_ALT3 | IOMUX_CONFIG_SION);
mxc_iomux_set_input(MUX_IN_I2C2_IPP_SCL_IN_SELECT_INPUT,
INPUT_CTL_PATH1);
mxc_iomux_set_pad(MX51_PIN_KEY_COL4,
PAD_CTL_SRE_FAST |
PAD_CTL_ODE_OPENDRAIN_ENABLE |
PAD_CTL_DRV_HIGH | PAD_CTL_100K_PU |
PAD_CTL_HYS_ENABLE);
/* Drive 26M_OSC_EN line high */
mxc_request_iomux(MX51_PIN_DI1_PIN12, IOMUX_CONFIG_ALT4);
mxc_iomux_set_pad(MX51_PIN_DI1_PIN12, PAD_CTL_DRV_HIGH |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
gpio_request(IOMUX_TO_GPIO(MX51_PIN_DI1_PIN12), "di1_pin12");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_DI1_PIN12), 0);
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_DI1_PIN12), 1);
/* Drive USB_CLK_EN_B line low */
mxc_request_iomux(MX51_PIN_EIM_D17, IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX51_PIN_EIM_D17, PAD_CTL_DRV_HIGH |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
gpio_request(IOMUX_TO_GPIO(MX51_PIN_EIM_D17), "eim_d17");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_D17), 0);
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_D17), 0);
/* MX51_PIN_EIM_D21 - De-assert USB PHY RESETB */
mxc_request_iomux(MX51_PIN_EIM_D21, IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX51_PIN_EIM_D21, PAD_CTL_DRV_HIGH |
PAD_CTL_HYS_NONE | PAD_CTL_PUE_KEEPER |
PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_NONE |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
gpio_request(IOMUX_TO_GPIO(MX51_PIN_EIM_D21), "eim_d21");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_D21), 0);
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_D21), 1);
/* hphone_det_b */
mxc_request_iomux(MX51_PIN_NANDF_D14, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_NANDF_D14, PAD_CTL_100K_PU);
gpio_request(IOMUX_TO_GPIO(MX51_PIN_NANDF_D14), "nandf_d14");
gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_NANDF_D14));
/* audio_clk_en_b */
mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, PAD_CTL_DRV_HIGH |
PAD_CTL_HYS_NONE | PAD_CTL_PUE_KEEPER |
PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_NONE |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
gpio_request(IOMUX_TO_GPIO(MX51_PIN_CSPI1_RDY), "cspi1_rdy");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSPI1_RDY), 0);
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSPI1_RDY), 0);
/* power key */
mxc_request_iomux(MX51_PIN_EIM_A27, IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX51_PIN_EIM_A27, PAD_CTL_SRE_FAST |
PAD_CTL_ODE_OPENDRAIN_NONE |
PAD_CTL_DRV_HIGH | PAD_CTL_100K_PU |
PAD_CTL_HYS_NONE);
gpio_request(IOMUX_TO_GPIO(MX51_PIN_EIM_A27), "eim_a27");
gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_EIM_A27));
}
if (cpu_is_mx51_rev(CHIP_REV_3_0) > 0) {
/* DVI_I2C_ENB = 0 tristates the DVI I2C level shifter */
mxc_request_iomux(MX51_PIN_CSI2_HSYNC, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_CSI2_HSYNC, PAD_CTL_DRV_HIGH |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
gpio_request(IOMUX_TO_GPIO(MX51_PIN_CSI2_HSYNC), "csi2_hsync");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI2_HSYNC), 0);
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI2_HSYNC), 0);
/* TO3 doesn't need pad to drive CSI_DATA_EN[0] high */
mxc_request_iomux(MX51_PIN_DI_GP3, IOMUX_CONFIG_ALT0);
}
/* Deassert VGA reset to free i2c bus */
gpio_request(IOMUX_TO_GPIO(MX51_PIN_EIM_A19), "eim_a19");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_A19), 0);
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_A19), 1);
/* LCD related gpio */
gpio_request(IOMUX_TO_GPIO(MX51_PIN_DI1_D1_CS), "di1_d1_cs");
gpio_request(IOMUX_TO_GPIO(MX51_PIN_DI1_D0_CS), "di1_d0_cs");
gpio_request(IOMUX_TO_GPIO(MX51_PIN_CSI2_D12), "csi2_d12");
gpio_request(IOMUX_TO_GPIO(MX51_PIN_CSI2_D13), "csi2_d13");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_DI1_D1_CS), 0);
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_DI1_D0_CS), 0);
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI2_D12), 0);
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI2_D13), 0);
/* Camera reset */
gpio_request(IOMUX_TO_GPIO(MX51_PIN_EIM_D23), "eim_d23");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_D23), 0);
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_D23), 1);
/* Camera low power */
gpio_request(IOMUX_TO_GPIO(MX51_PIN_CSI2_D19), "csi2_d19");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI2_D19), 0);
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI2_D19), 0);
/* OSC_EN */
gpio_request(IOMUX_TO_GPIO(MX51_PIN_EIM_D18), "eim_d18");
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_D18), 0);
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_D18), 1);
if (enable_w1) {
/* OneWire */
mxc_request_iomux(MX51_PIN_OWIRE_LINE, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_OWIRE_LINE, PAD_CTL_HYS_ENABLE |
PAD_CTL_PKE_ENABLE |
PAD_CTL_ODE_OPENDRAIN_ENABLE |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST |
PAD_CTL_100K_PU | PAD_CTL_PUE_PULL);
} else {
/* SPDIF Out */
mxc_request_iomux(MX51_PIN_OWIRE_LINE, IOMUX_CONFIG_ALT6);
mxc_iomux_set_pad(MX51_PIN_OWIRE_LINE, PAD_CTL_DRV_HIGH |
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_PULL |
PAD_CTL_100K_PU | PAD_CTL_SRE_FAST);
}
}
void gpio_activate_esai_ports(void)
{
unsigned int pad_val;
/* ESAI1-HCKR */
mxc_request_iomux(MX53_PIN_FEC_RX_ER, IOMUX_CONFIG_ALT2);
/* ESAI1-SCKR */
mxc_request_iomux(MX53_PIN_FEC_MDIO, IOMUX_CONFIG_ALT2);
/* ESAI1-FSR */
mxc_request_iomux(MX53_PIN_FEC_REF_CLK, IOMUX_CONFIG_ALT2);
/* ESAI1-HCKT */
mxc_request_iomux(MX53_PIN_FEC_RXD0, IOMUX_CONFIG_ALT2);
/* ESAI1-SCKT */
mxc_request_iomux(MX53_PIN_FEC_CRS_DV, IOMUX_CONFIG_ALT2);
/* ESAI1-FST */
mxc_request_iomux(MX53_PIN_FEC_RXD1, IOMUX_CONFIG_ALT2);
/* ESAI1-TX5-RX0 */
mxc_request_iomux(MX53_PIN_FEC_MDC, IOMUX_CONFIG_ALT2);
/* ESAI1-TX4-RX1 */
mxc_request_iomux(MX53_PIN_FEC_TXD0, IOMUX_CONFIG_ALT2);
/* ESAI1-TX3-RX2 */
mxc_request_iomux(MX53_PIN_FEC_TX_EN, IOMUX_CONFIG_ALT2);
/* ESAI1-TX2-RX3 */
mxc_request_iomux(MX53_PIN_FEC_TXD1, IOMUX_CONFIG_ALT2);
/* ESAI1-TX1 */
mxc_request_iomux(MX53_PIN_NANDF_CS3, IOMUX_CONFIG_ALT3);
/* ESAI1-TX0 */
mxc_request_iomux(MX53_PIN_NANDF_CS2, IOMUX_CONFIG_ALT3);
pad_val = PAD_CTL_DRV_HIGH | PAD_CTL_HYS_ENABLE |
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_PULL |
PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_NONE;
/* ESAI1-HCKR */
mxc_iomux_set_pad(MX53_PIN_FEC_RX_ER, pad_val);
/* ESAI1-SCKR */
mxc_iomux_set_pad(MX53_PIN_FEC_MDIO, pad_val);
/* ESAI1-FSR */
mxc_iomux_set_pad(MX53_PIN_FEC_REF_CLK, pad_val);
/* ESAI1-HCKT */
mxc_iomux_set_pad(MX53_PIN_FEC_RXD0, pad_val);
/* ESAI1-SCKT */
mxc_iomux_set_pad(MX53_PIN_FEC_CRS_DV, pad_val);
/* ESAI1-FST */
mxc_iomux_set_pad(MX53_PIN_FEC_RXD1, pad_val);
/* ESAI1-TX5-RX0 */
mxc_iomux_set_pad(MX53_PIN_FEC_MDC, pad_val);
/* ESAI1-TX4-RX1 */
mxc_iomux_set_pad(MX53_PIN_FEC_TXD0, pad_val);
/* ESAI1-TX3-RX2 */
mxc_iomux_set_pad(MX53_PIN_FEC_TX_EN, pad_val);
/* ESAI1-TX2-RX3 */
mxc_iomux_set_pad(MX53_PIN_FEC_TXD1, pad_val);
/* ESAI1-TX1 */
mxc_iomux_set_pad(MX53_PIN_NANDF_CS3, pad_val);
/* ESAI1-TX0 */
mxc_iomux_set_pad(MX53_PIN_NANDF_CS2, pad_val);
/* ESAI1-HCKR */
mxc_iomux_set_input(MUX_IN_ESAI1_IPP_IND_HCKR_SELECT_INPUT,
INPUT_CTL_PATH0);
/* ESAI1-SCKR */
mxc_iomux_set_input(MUX_IN_ESAI1_IPP_IND_SCKR_SELECT_INPUT,
INPUT_CTL_PATH0);
/* ESAI1-FSR */
mxc_iomux_set_input(MUX_IN_ESAI1_IPP_IND_FSR_SELECT_INPUT,
INPUT_CTL_PATH0);
/* ESAI1-HCKT */
mxc_iomux_set_input(MUX_IN_ESAI1_IPP_IND_HCKT_SELECT_INPUT,
INPUT_CTL_PATH0);
/* ESAI1-SCKT */
mxc_iomux_set_input(MUX_IN_ESAI1_IPP_IND_SCKT_SELECT_INPUT,
INPUT_CTL_PATH0);
/* ESAI1-FST */
mxc_iomux_set_input(MUX_IN_ESAI1_IPP_IND_FST_SELECT_INPUT,
INPUT_CTL_PATH0);
/* ESAI1-TX5-RX0 */
mxc_iomux_set_input(MUX_IN_ESAI1_IPP_IND_SDO5_SDI0_SELECT_INPUT,
INPUT_CTL_PATH0);
/* ESAI1-TX4-RX1 */
mxc_iomux_set_input(MUX_IN_ESAI1_IPP_IND_SDO4_SDI1_SELECT_INPUT,
INPUT_CTL_PATH0);
/* ESAI1-TX3-RX2 */
mxc_iomux_set_input(MUX_IN_ESAI1_IPP_IND_SDO3_SDI2_SELECT_INPUT,
INPUT_CTL_PATH0);
/* ESAI1-TX2-RX3 */
mxc_iomux_set_input(MUX_IN_ESAI1_IPP_IND_SDO2_SDI3_SELECT_INPUT,
INPUT_CTL_PATH0);
/* ESAI1-TX1 */
mxc_iomux_set_input(MUX_IN_ESAI1_IPP_IND_SDO1_SELECT_INPUT,
INPUT_CTL_PATH0);
/* ESAI1-TX0 */
mxc_iomux_set_input(MUX_IN_ESAI1_IPP_IND_SDO0_SELECT_INPUT,
INPUT_CTL_PATH0);
}
void __init mx53_evk_io_init(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(mxc_iomux_pins); i++) {
mxc_request_iomux(mxc_iomux_pins[i].pin,
mxc_iomux_pins[i].mux_mode);
if (mxc_iomux_pins[i].pad_cfg)
mxc_iomux_set_pad(mxc_iomux_pins[i].pin,
mxc_iomux_pins[i].pad_cfg);
if (mxc_iomux_pins[i].in_select)
mxc_iomux_set_input(mxc_iomux_pins[i].in_select,
mxc_iomux_pins[i].in_mode);
}
if (board_is_mx53_arm2()) {
/* MX53 ARM2 CPU board */
pr_info("MX53 ARM2 board \n");
for (i = 0; i < ARRAY_SIZE(mx53_arm2_iomux_pins); i++) {
mxc_request_iomux(mx53_arm2_iomux_pins[i].pin,
mx53_arm2_iomux_pins[i].mux_mode);
if (mx53_arm2_iomux_pins[i].pad_cfg)
mxc_iomux_set_pad(mx53_arm2_iomux_pins[i].pin,
mx53_arm2_iomux_pins[i].pad_cfg);
if (mx53_arm2_iomux_pins[i].in_select)
mxc_iomux_set_input(mx53_arm2_iomux_pins[i].in_select,
mx53_arm2_iomux_pins[i].in_mode);
}
/* Enable OTG VBus with GPIO low */
mxc_iomux_set_pad(MX53_PIN_EIM_D22, PAD_CTL_DRV_HIGH |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
gpio_request(IOMUX_TO_GPIO(MX53_PIN_EIM_D22), "gpio3_22");
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_EIM_D22), 0);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_EIM_D22), 0);
gpio_request(IOMUX_TO_GPIO(MX53_PIN_GPIO_1), "gpio1_1");
gpio_direction_input(IOMUX_TO_GPIO(MX53_PIN_GPIO_1)); /* SD1 CD */
gpio_request(IOMUX_TO_GPIO(MX53_PIN_DI0_PIN4), "gpio4_20");
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_DI0_PIN4), 0);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_DI0_PIN4), 1);
} else {
/* MX53 EVK board */
pr_info("MX53 EVK board \n");
for (i = 0; i < ARRAY_SIZE(mx53_evk_iomux_pins); i++) {
mxc_request_iomux(mx53_evk_iomux_pins[i].pin,
mx53_evk_iomux_pins[i].mux_mode);
if (mx53_evk_iomux_pins[i].pad_cfg)
mxc_iomux_set_pad(mx53_evk_iomux_pins[i].pin,
mx53_evk_iomux_pins[i].pad_cfg);
if (mx53_evk_iomux_pins[i].in_select)
mxc_iomux_set_input(mx53_evk_iomux_pins[i].in_select,
mx53_evk_iomux_pins[i].in_mode);
}
/* Host1 Vbus with GPIO high */
mxc_iomux_set_pad(MX53_PIN_ATA_DA_2, PAD_CTL_DRV_HIGH |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
gpio_request(IOMUX_TO_GPIO(MX53_PIN_ATA_DA_2), "gpio7_8");
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_ATA_DA_2), 1);
/* USB HUB RESET - De-assert USB HUB RESET_N */
mxc_iomux_set_pad(MX53_PIN_CSI0_DATA_EN, PAD_CTL_DRV_HIGH |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
gpio_request(IOMUX_TO_GPIO(MX53_PIN_CSI0_DATA_EN), "gpio5_20");
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_CSI0_DATA_EN), 0);
msleep(1);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_CSI0_DATA_EN), 0);
msleep(1);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_CSI0_DATA_EN), 1);
/* Enable OTG VBus with GPIO low */
mxc_iomux_set_pad(MX53_PIN_EIM_A23, PAD_CTL_DRV_HIGH |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
gpio_request(IOMUX_TO_GPIO(MX53_PIN_EIM_A23), "gpio6_6");
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_EIM_A23), 0);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_EIM_A23), 0);
gpio_request(IOMUX_TO_GPIO(MX53_PIN_EIM_DA13), "gpio3_13");
gpio_direction_input(IOMUX_TO_GPIO(MX53_PIN_EIM_DA13)); /* SD1 CD */
gpio_request(IOMUX_TO_GPIO(MX53_PIN_EIM_DA14), "gpio3_14");
gpio_direction_input(IOMUX_TO_GPIO(MX53_PIN_EIM_DA14)); /* SD1 WP */
/* SD3 CD */
gpio_request(IOMUX_TO_GPIO(MX53_PIN_EIM_DA11), "gpio3_11");
gpio_direction_input(IOMUX_TO_GPIO(MX53_PIN_EIM_DA11));
/* SD3 WP */
gpio_request(IOMUX_TO_GPIO(MX53_PIN_EIM_DA12), "gpio3_12");
gpio_direction_input(IOMUX_TO_GPIO(MX53_PIN_EIM_DA11));
/* reset FEC PHY */
gpio_request(IOMUX_TO_GPIO(MX53_PIN_ATA_DA_0), "gpio7_6");
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_ATA_DA_0), 0);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_ATA_DA_0), 0);
msleep(1);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_ATA_DA_0), 1);
}
/* DVI Detect */
gpio_request(IOMUX_TO_GPIO(MX53_PIN_EIM_D31), "gpio3_31");
gpio_direction_input(IOMUX_TO_GPIO(MX53_PIN_EIM_D31));
/* DVI Reset - Assert for i2c disabled mode */
gpio_request(IOMUX_TO_GPIO(MX53_PIN_EIM_WAIT), "gpio5_0");
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_EIM_WAIT), 0);
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_EIM_WAIT), 0);
/* DVI Power-down */
gpio_request(IOMUX_TO_GPIO(MX53_PIN_EIM_D24), "gpio3_24");
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_EIM_D24), 0);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_EIM_D24), 1);
/* DVI I2C enable */
gpio_request(IOMUX_TO_GPIO(MX53_PIN_EIM_D28), "gpio3_28");
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_EIM_D28), 0);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_EIM_D28), 0);
for (i = 0; i < ARRAY_SIZE(nand_iomux_pins); i++) {
mxc_request_iomux(nand_iomux_pins[i].pin,
nand_iomux_pins[i].mux_mode);
if (nand_iomux_pins[i].pad_cfg)
mxc_iomux_set_pad(nand_iomux_pins[i].pin,
nand_iomux_pins[i].pad_cfg);
if (nand_iomux_pins[i].in_select)
mxc_iomux_set_input(nand_iomux_pins[i].in_select,
nand_iomux_pins[i].in_mode);
}
gpio_request(IOMUX_TO_GPIO(MX53_PIN_GPIO_16), "gpio7_11");
gpio_direction_input(IOMUX_TO_GPIO(MX53_PIN_GPIO_16)); /*PMIC_INT*/
/* headphone_det_b */
mxc_request_iomux(MX53_PIN_ATA_DATA5, IOMUX_CONFIG_GPIO);
mxc_iomux_set_pad(MX53_PIN_ATA_DATA5, PAD_CTL_100K_PU);
gpio_request(IOMUX_TO_GPIO(MX53_PIN_ATA_DATA5), "gpio2_5");
gpio_direction_input(IOMUX_TO_GPIO(MX53_PIN_ATA_DATA5));
/* power key */
/* LCD related gpio */
/* Camera reset */
gpio_request(IOMUX_TO_GPIO(MX53_PIN_GPIO_10), "gpio4_0");
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_GPIO_10), 0);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_GPIO_10), 1);
/* Camera low power */
gpio_request(IOMUX_TO_GPIO(MX53_PIN_CSI0_D5), "gpio5_23");
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_CSI0_D5), 0);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_CSI0_D5), 0);
/* CAN1 enable GPIO*/
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_GPIO_18), 0);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_GPIO_18), 0);
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_GPIO_17), 0);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_GPIO_17), 0);
/* CAN2 enable GPIO*/
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_CSI0_D6), 0);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_CSI0_D6), 0);
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_GPIO_14), 0);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_GPIO_14), 0);
/* GPIO for 12V */
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_GPIO_19), 0);
gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_GPIO_19), 0);
}
void __init mx50_yoshime_io_init(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(mxc_iomux_pins); i++) {
mxc_request_iomux(mxc_iomux_pins[i].pin,
mxc_iomux_pins[i].mux_mode);
if (mxc_iomux_pins[i].pad_cfg)
mxc_iomux_set_pad(mxc_iomux_pins[i].pin,
mxc_iomux_pins[i].pad_cfg);
if (mxc_iomux_pins[i].in_select)
mxc_iomux_set_input(mxc_iomux_pins[i].in_select,
mxc_iomux_pins[i].in_mode);
}
/* SD4 CD */
gpio_request(IOMUX_TO_GPIO(MX50_PIN_DISP_D15), "sd4_cd");
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_DISP_D15));
/* SD4 WP */
gpio_request(IOMUX_TO_GPIO(MX50_PIN_DISP_D14), "sd4_wp");
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_DISP_D14));
/* PMIC Interrupt */
gpio_request(IOMUX_TO_GPIO(MX50_PIN_UART1_CTS), "pmic_int");
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_UART1_CTS));
/* WiFi Power */
gpio_request(IOMUX_TO_GPIO(MX50_PIN_SD3_WP), "sd3_wp");
gpio_direction_output(IOMUX_TO_GPIO(MX50_PIN_SD3_WP), 0);
gpio_set_value(IOMUX_TO_GPIO(MX50_PIN_SD3_WP), 1);
/* WiFi spec, add delay */
mdelay(40);
gpio_request(IOMUX_TO_GPIO(MX50_PIN_SSI_RXC), "gp5_6");
gpio_direction_output(IOMUX_TO_GPIO(MX50_PIN_SSI_RXC), 0);
gpio_set_value(IOMUX_TO_GPIO(MX50_PIN_SSI_RXC), 1);
/*hall sensor*/
gpio_request(IOMUX_TO_GPIO(MX50_PIN_SD2_WP), "hall");
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_SD2_WP));
/*Front light*/
gpio_request(IOMUX_TO_GPIO(MX50_PIN_PWM1), "fl_cntrl");
gpio_direction_output(IOMUX_TO_GPIO(MX50_PIN_PWM1), 0);
/* Wait 5ms before powering on Papyrus */
mdelay(5);
#ifdef CONFIG_SND_MXC_SOC
mxc_request_iomux(MX50_PIN_SSI_TXC, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX50_PIN_SSI_TXC, PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
PAD_CTL_DRV_HIGH | PAD_CTL_ODE_OPENDRAIN_NONE);
mx50_audio_clock_enable(1);
#endif
gpio_request(IOMUX_TO_GPIO(MX50_PIN_EPDC_VCOM0), "epdc_vcom");
gpio_direction_output(IOMUX_TO_GPIO(MX50_PIN_EPDC_VCOM0), 0);
gpio_request(IOMUX_TO_GPIO(MX50_PIN_EPDC_PWRSTAT), "epdc_pwrstat");
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_EPDC_PWRSTAT));
gpio_request(IOMUX_TO_GPIO(MX50_PIN_EPDC_PWRCOM), "epdc_pwrcom");
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_EPDC_PWRCOM));
gpio_request(IOMUX_TO_GPIO(MX50_PIN_EPDC_PWRCTRL0), "epdc_pwrctrl0");
gpio_direction_output(IOMUX_TO_GPIO(MX50_PIN_EPDC_PWRCTRL0), 0);
gpio_set_value(IOMUX_TO_GPIO(MX50_PIN_EPDC_PWRCTRL0), 1);
gpio_request(IOMUX_TO_GPIO(MX50_PIN_EPDC_PWRCTRL1), "epdc_pwrctrl1");
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_EPDC_PWRCTRL1));
#ifdef CONFIG_SND_MXC_SOC
gpio_request(IOMUX_TO_GPIO(MX50_PIN_EIM_DA4), "eim_da4");
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_EIM_DA4));
#endif
gpio_request(IOMUX_TO_GPIO(MX50_PIN_OWIRE), "owire");
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_OWIRE));
/* WAN Power */
gpio_direction_output(IOMUX_TO_GPIO(MX50_PIN_EIM_RW), 0);
gpio_set_value(IOMUX_TO_GPIO(MX50_PIN_EIM_RW), 0);
/* WAN USB */
gpio_direction_output(IOMUX_TO_GPIO(MX50_PIN_DISP_RD), 0);
gpio_set_value(IOMUX_TO_GPIO(MX50_PIN_DISP_RD), 0);
/* WAN RF */
gpio_direction_output(IOMUX_TO_GPIO(MX50_PIN_EIM_DA10), 0);
gpio_set_value(IOMUX_TO_GPIO(MX50_PIN_EIM_DA10), 0);
/* WAN HMI Host->Modem IRQ */
gpio_direction_output(IOMUX_TO_GPIO(MX50_PIN_EIM_DA9), 0);
/* WAN MHI : Modem->Host IRQ */
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_EIM_DA8));
/* WAN FW Ready */
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_EIM_DA6));
/* EIM_DA10 and EIM_DA11 */
gpio_direction_output(IOMUX_TO_GPIO(MX50_PIN_EIM_DA11), 0);
gpio_set_value(IOMUX_TO_GPIO(MX50_PIN_EIM_DA11), 0);
gpio_direction_output(IOMUX_TO_GPIO(MX50_PIN_EIM_DA12), 0);
gpio_set_value(IOMUX_TO_GPIO(MX50_PIN_EIM_DA12), 0);
/* Proximity */
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_DISP_D0));
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_EIM_DA0));
/* Proximity Reset */
gpio_direction_output(IOMUX_TO_GPIO(MX50_PIN_DISP_D7), 0);
/* Accelerometer IRQ2 moved after Whitney protos */
gpio_request(IOMUX_TO_GPIO(MX50_PIN_SD1_D2), "sd1_d2");
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_SD1_D2));
gpio_request(IOMUX_TO_GPIO(MX50_PIN_SD1_D3), "sd1_d3");
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_SD1_D3));
if (mx50_board_is(BOARD_ID_WHITNEY) ||
mx50_board_is(BOARD_ID_WHITNEY_WFO) ) {
printk("Configure EMI_CS1 for whitney \n");
mxc_request_iomux(MX50_PIN_EIM_CS1, IOMUX_CONFIG_GPIO);
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_EIM_CS1));
mxc_iomux_set_pad(MX50_PIN_EIM_CS1, PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_PULL |
PAD_CTL_ODE_OPENDRAIN_NONE | PAD_CTL_DRV_HIGH |
PAD_CTL_100K_PD);
}
/* EPDC */
gpio_request(IOMUX_TO_GPIO(MX50_PIN_EPDC_SDCE0), "epdc_sdce0");
gpio_direction_output(IOMUX_TO_GPIO(MX50_PIN_EPDC_SDCE0), 0);
gpio_request(IOMUX_TO_GPIO(MX50_PIN_EPDC_GDSP), "epdc_gdsp");
gpio_direction_output(IOMUX_TO_GPIO(MX50_PIN_EPDC_GDSP), 0);
/* Accessory charging */
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_EIM_DA13));
/* UART4 is not needed on !FINKLE */
if (!mx50_board_is(BOARD_ID_FINKLE_EVT1)) {
mxc_free_iomux(MX50_PIN_UART4_TXD, IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX50_PIN_UART4_TXD, IOMUX_CONFIG_ALT1);
gpio_request(IOMUX_TO_GPIO(MX50_PIN_UART4_TXD), "uart4_txd");
gpio_direction_output(IOMUX_TO_GPIO(MX50_PIN_UART4_TXD), 0);
gpio_set_value(IOMUX_TO_GPIO(MX50_PIN_UART4_TXD), 0);
}
#ifndef CONFIG_MX50_YOSHI_SDCARD
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_DISP_D8));
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_DISP_D9));
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_DISP_D10));
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_DISP_D11));
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_DISP_D12));
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_DISP_D13));
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_DISP_D14));
gpio_direction_input(IOMUX_TO_GPIO(MX50_PIN_DISP_D15));
#endif
/* NAND family - 1.8V */
__raw_writel(0x2000, IO_ADDRESS(IOMUXC_BASE_ADDR) + 0x06c0);
__raw_writel(0x2000, IO_ADDRESS(IOMUXC_BASE_ADDR) + 0x069c);
}
void __init mx51_babbage_io_init(void)
{
int i;
/* Work-around For external USB HUB chip to use default configuration
by reseting hub with i2c lines pulled low */
mxc_request_iomux(MX51_PIN_GPIO1_7, IOMUX_CONFIG_GPIO);
mxc_iomux_set_pad(MX51_PIN_GPIO1_7, PAD_CTL_DRV_HIGH |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
mxc_set_gpio_direction(MX51_PIN_GPIO1_7, 0);
if (cpu_is_mx51_rev(CHIP_REV_1_1) == 1) {
/* Drive I2C1 SDA line low */
mxc_request_iomux(MX51_PIN_GPIO1_3, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_GPIO1_3, PAD_CTL_DRV_HIGH |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
mxc_set_gpio_direction(MX51_PIN_GPIO1_3, 0);
mxc_set_gpio_dataout(MX51_PIN_GPIO1_3, 0);
/* Drive I2C1 SCL line low */
mxc_request_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_GPIO1_2, PAD_CTL_DRV_HIGH |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
mxc_set_gpio_direction(MX51_PIN_GPIO1_2, 0);
mxc_set_gpio_dataout(MX51_PIN_GPIO1_2, 0);
msleep(5);
mxc_free_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_GPIO1_3, IOMUX_CONFIG_ALT2);
}
/* USB HUB RESET - De-assert USB HUB RESET_N */
msleep(1);
mxc_set_gpio_dataout(MX51_PIN_GPIO1_7, 0);
msleep(1);
mxc_set_gpio_dataout(MX51_PIN_GPIO1_7, 1);
for (i = 0; i < ARRAY_SIZE(mxc_iomux_pins); i++) {
mxc_request_iomux(mxc_iomux_pins[i].pin,
mxc_iomux_pins[i].mux_mode);
if (mxc_iomux_pins[i].pad_cfg)
mxc_iomux_set_pad(mxc_iomux_pins[i].pin,
mxc_iomux_pins[i].pad_cfg);
if (mxc_iomux_pins[i].in_select)
mxc_iomux_set_input(mxc_iomux_pins[i].in_select,
mxc_iomux_pins[i].in_mode);
}
mxc_set_gpio_direction(MX51_PIN_GPIO1_8, 1);
mxc_set_gpio_direction(MX51_PIN_GPIO1_0, 1); /* SD1 CD */
mxc_set_gpio_direction(MX51_PIN_GPIO1_1, 1); /* SD1 WP */
if (board_is_babbage_2_5() == 1)
/* BB2.5 */
mxc_set_gpio_direction(MX51_PIN_GPIO1_6, 1); /* SD2 CD */
else
/* BB2.0 */
mxc_set_gpio_direction(MX51_PIN_GPIO1_4, 1); /* SD2 CD */
mxc_set_gpio_direction(MX51_PIN_GPIO1_5, 1); /* SD2 WP */
/* reset FEC PHY */
mxc_set_gpio_direction(MX51_PIN_EIM_A20, 0);
mxc_set_gpio_dataout(MX51_PIN_EIM_A20, 0);
msleep(10);
mxc_set_gpio_dataout(MX51_PIN_EIM_A20, 1);
/* reset FM */
mxc_set_gpio_dataout(MX51_PIN_EIM_A21, 0);
mxc_set_gpio_direction(MX51_PIN_EIM_A21, 0);
msleep(10);
mxc_set_gpio_dataout(MX51_PIN_EIM_A21, 1);
if (cpu_is_mx51_rev(CHIP_REV_1_1) == 1) {
/* MX51_PIN_EIM_CRE - De-assert USB PHY RESETB */
mxc_set_gpio_direction(MX51_PIN_EIM_CRE, 0);
mxc_set_gpio_dataout(MX51_PIN_EIM_CRE, 1);
/* hphone_det_b */
mxc_set_gpio_direction(MX51_PIN_NANDF_CS0, 1);
} else {
mxc_free_iomux(MX51_PIN_EIM_D21, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_EIM_A24, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_EIM_A25, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_EIM_D18, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_EIM_D20, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_EIM_D21, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_EIM_D23, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_EIM_D16, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_EIM_D17, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_EIM_D19, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_GPIO1_3, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_EIM_LBA, IOMUX_CONFIG_GPIO);
mxc_free_iomux(MX51_PIN_NANDF_CS0, IOMUX_CONFIG_GPIO);
/* i2c1 SDA */
mxc_request_iomux(MX51_PIN_EIM_D16,
IOMUX_CONFIG_ALT4 | IOMUX_CONFIG_SION);
mxc_iomux_set_input(MUX_IN_I2C1_IPP_SDA_IN_SELECT_INPUT,
INPUT_CTL_PATH1);
mxc_iomux_set_pad(MX51_PIN_EIM_D16, PAD_CTL_SRE_FAST |
PAD_CTL_ODE_OPENDRAIN_ENABLE |
PAD_CTL_DRV_HIGH | PAD_CTL_100K_PU |
PAD_CTL_HYS_ENABLE);
/* i2c1 SCL */
mxc_request_iomux(MX51_PIN_EIM_D19,
IOMUX_CONFIG_ALT4 | IOMUX_CONFIG_SION);
mxc_iomux_set_input(MUX_IN_I2C1_IPP_SCL_IN_SELECT_INPUT,
INPUT_CTL_PATH1);
mxc_iomux_set_pad(MX51_PIN_EIM_D19, PAD_CTL_SRE_FAST |
PAD_CTL_ODE_OPENDRAIN_ENABLE |
PAD_CTL_DRV_HIGH | PAD_CTL_100K_PU |
PAD_CTL_HYS_ENABLE);
/* i2c2 SDA */
mxc_request_iomux(MX51_PIN_KEY_COL5,
IOMUX_CONFIG_ALT3 | IOMUX_CONFIG_SION);
mxc_iomux_set_input(MUX_IN_I2C2_IPP_SDA_IN_SELECT_INPUT,
INPUT_CTL_PATH1);
mxc_iomux_set_pad(MX51_PIN_KEY_COL5,
PAD_CTL_SRE_FAST |
PAD_CTL_ODE_OPENDRAIN_ENABLE |
PAD_CTL_DRV_HIGH | PAD_CTL_100K_PU |
PAD_CTL_HYS_ENABLE);
/* i2c2 SCL */
mxc_request_iomux(MX51_PIN_KEY_COL4,
IOMUX_CONFIG_ALT3 | IOMUX_CONFIG_SION);
mxc_iomux_set_input(MUX_IN_I2C2_IPP_SCL_IN_SELECT_INPUT,
INPUT_CTL_PATH1);
mxc_iomux_set_pad(MX51_PIN_KEY_COL4,
PAD_CTL_SRE_FAST |
PAD_CTL_ODE_OPENDRAIN_ENABLE |
PAD_CTL_DRV_HIGH | PAD_CTL_100K_PU |
PAD_CTL_HYS_ENABLE);
/* Drive 26M_OSC_EN line high */
mxc_request_iomux(MX51_PIN_DI1_PIN12, IOMUX_CONFIG_ALT4);
mxc_iomux_set_pad(MX51_PIN_DI1_PIN12, PAD_CTL_DRV_HIGH |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
mxc_set_gpio_direction(MX51_PIN_DI1_PIN12, 0);
mxc_set_gpio_dataout(MX51_PIN_DI1_PIN12, 1);
/* Drive USB_CLK_EN_B line low */
mxc_request_iomux(MX51_PIN_EIM_D17, IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX51_PIN_EIM_D17, PAD_CTL_DRV_HIGH |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
mxc_set_gpio_direction(MX51_PIN_EIM_D17, 0);
mxc_set_gpio_dataout(MX51_PIN_EIM_D17, 0);
/* MX51_PIN_EIM_D21 - De-assert USB PHY RESETB */
mxc_request_iomux(MX51_PIN_EIM_D21, IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX51_PIN_EIM_D21, PAD_CTL_DRV_HIGH |
PAD_CTL_HYS_NONE | PAD_CTL_PUE_KEEPER |
PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_NONE |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
mxc_set_gpio_direction(MX51_PIN_EIM_D21, 0);
mxc_set_gpio_dataout(MX51_PIN_EIM_D21, 1);
/* hphone_det_b */
mxc_request_iomux(MX51_PIN_NANDF_D14, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_NANDF_D14, PAD_CTL_100K_PU);
mxc_set_gpio_direction(MX51_PIN_NANDF_D14, 1);
/* audio_clk_en_b */
mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, PAD_CTL_DRV_HIGH |
PAD_CTL_HYS_NONE | PAD_CTL_PUE_KEEPER |
PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_NONE |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
mxc_set_gpio_direction(MX51_PIN_CSPI1_RDY, 0);
mxc_set_gpio_dataout(MX51_PIN_CSPI1_RDY, 0);
/* power key */
mxc_request_iomux(MX51_PIN_EIM_A27, IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX51_PIN_EIM_A27, PAD_CTL_SRE_FAST |
PAD_CTL_ODE_OPENDRAIN_NONE |
PAD_CTL_DRV_HIGH | PAD_CTL_100K_PU |
PAD_CTL_HYS_NONE);
mxc_set_gpio_direction(MX51_PIN_EIM_A27, 1);
}
/* Deassert VGA reset to free i2c bus */
mxc_set_gpio_direction(MX51_PIN_EIM_A19, 0);
mxc_set_gpio_dataout(MX51_PIN_EIM_A19, 1);
/* LCD related gpio */
mxc_set_gpio_direction(MX51_PIN_DI1_D1_CS, 0);
}
void __init mx51_3stack_io_init(void)
{
int i, num;
struct mxc_iomux_pin_cfg *pin_ptr;
for (i = 0; i < ARRAY_SIZE(mxc_iomux_pins); i++) {
mxc_request_iomux(mxc_iomux_pins[i].pin,
mxc_iomux_pins[i].mux_mode);
if (mxc_iomux_pins[i].pad_cfg)
mxc_iomux_set_pad(mxc_iomux_pins[i].pin,
mxc_iomux_pins[i].pad_cfg);
if (mxc_iomux_pins[i].in_select)
mxc_iomux_set_input(mxc_iomux_pins[i].in_select,
mxc_iomux_pins[i].in_mode);
}
if (enable_ata) {
pin_ptr = ata_iomux_pins;
num = ARRAY_SIZE(ata_iomux_pins);
} else if (enable_sim) {
pin_ptr = sim_iomux_pins;
num = ARRAY_SIZE(sim_iomux_pins);
} else {
pin_ptr = nand_iomux_pins;
num = ARRAY_SIZE(nand_iomux_pins);
}
for (i = 0; i < num; i++) {
mxc_request_iomux(pin_ptr[i].pin, pin_ptr[i].mux_mode);
if (pin_ptr[i].pad_cfg)
mxc_iomux_set_pad(pin_ptr[i].pin, pin_ptr[i].pad_cfg);
if (pin_ptr[i].in_select)
mxc_iomux_set_input(pin_ptr[i].in_select,
pin_ptr[i].in_mode);
}
/* Camera low power */
mxc_set_gpio_direction(MX51_PIN_CSI1_D8, 0);
mxc_set_gpio_dataout(MX51_PIN_CSI1_D8, 0);
mxc_set_gpio_direction(MX51_PIN_EIM_EB2, 0); /* TO1 */
mxc_set_gpio_dataout(MX51_PIN_EIM_EB2, 0); /* TO1 */
/* Camera reset */
mxc_set_gpio_direction(MX51_PIN_CSI1_D9, 0);
mxc_set_gpio_dataout(MX51_PIN_CSI1_D9, 1);
mxc_set_gpio_direction(MX51_PIN_DI1_D1_CS, 0);
mxc_set_gpio_direction(MX51_PIN_GPIO1_0, 1); /* SD1 CD */
mxc_set_gpio_direction(MX51_PIN_GPIO1_1, 1); /* SD1 WP */
/* EIM_D16 */
/* osc_en is shared by SPDIF */
mxc_set_gpio_direction(MX51_PIN_EIM_D16, 0);
mxc_set_gpio_dataout(MX51_PIN_EIM_D16, 1);
/* LCD related gpio */
mxc_set_gpio_direction(MX51_PIN_DI1_D1_CS, 0);
mxc_set_gpio_direction(MX51_PIN_DISPB2_SER_DIO, 0);
mxc_set_gpio_dataout(MX51_PIN_DISPB2_SER_DIO, 0);
/* GPS related gpio */
mxc_set_gpio_direction(MX51_PIN_EIM_CS2, 0);
mxc_set_gpio_dataout(MX51_PIN_EIM_CS2, 0);
mxc_set_gpio_direction(MX51_PIN_EIM_CRE, 0);
mxc_set_gpio_dataout(MX51_PIN_EIM_CRE, 0);
mxc_set_gpio_dataout(MX51_PIN_EIM_CRE, 1);
}
