static void mt7628_ephy_init(void)
{
int i;
u32 val;
val = sysRegRead(REG_AGPIOCFG);
val &= ~(MT7628_P0_EPHY_AIO_EN | MT7628_P1_EPHY_AIO_EN | MT7628_P2_EPHY_AIO_EN | MT7628_P3_EPHY_AIO_EN | MT7628_P4_EPHY_AIO_EN);
sysRegWrite(REG_AGPIOCFG, val);
// reset EPHY
esw_ephy_reset();
udelay(5000);
/* set P0~P4 EPHY LED mode */
sysRegRead(RALINK_SYSCTL_BASE + 0x64);
val &= 0xf003f003;
sysRegWrite(RALINK_SYSCTL_BASE + 0x64, val);
mii_mgr_write(0, 31, 0x2000); // change G2 page
mii_mgr_write(0, 26, 0x0000);
for(i=0; i<5; i++) {
mii_mgr_write(i, 31, 0x8000); // change L0 page
mii_mgr_write(i, 0, 0x3100);
#if defined (CONFIG_RAETH_8023AZ_EEE)
mii_mgr_read(i, 26, &phy_val); // EEE setting
phy_val |= (1 << 5);
mii_mgr_write(i, 26, phy_val);
#endif
mii_mgr_write(i, 30, 0xa000);
mii_mgr_write(i, 31, 0xa000); // change L2 page
mii_mgr_write(i, 16, 0x0606);
mii_mgr_write(i, 23, 0x0f0e);
mii_mgr_write(i, 24, 0x1610);
mii_mgr_write(i, 30, 0x1f15);
mii_mgr_write(i, 28, 0x6111);
#if 0
mii_mgr_read(i, 4, &phy_val);
phy_val |= (1 << 10);
mii_mgr_write(i, 4, phy_val);
mii_mgr_write(i, 31, 0x2000); // change G2 page
mii_mgr_write(i, 26, 0x0000);
#endif
}
//100Base AOI setting
mii_mgr_write(0, 31, 0x5000); //change G5 page
mii_mgr_write(0, 19, 0x004a);
mii_mgr_write(0, 20, 0x015a);
mii_mgr_write(0, 21, 0x00ee);
mii_mgr_write(0, 22, 0x0033);
mii_mgr_write(0, 23, 0x020a);
mii_mgr_write(0, 24, 0x0000);
mii_mgr_write(0, 25, 0x024a);
mii_mgr_write(0, 26, 0x035a);
mii_mgr_write(0, 27, 0x02ee);
mii_mgr_write(0, 28, 0x0233);
mii_mgr_write(0, 29, 0x000a);
mii_mgr_write(0, 30, 0x0000);
}
void enable_auto_negotiate(int ge)
{
#if defined (CONFIG_RALINK_RT3052) || defined (CONFIG_RALINK_RT3352) || defined (CONFIG_RALINK_RT5350)
u32 regValue = sysRegRead(0xb01100C8);
#else
u32 regValue;
regValue = (ge == 2)? sysRegRead(MDIO_CFG2) : sysRegRead(MDIO_CFG);
#endif
regValue &= 0xe0ff7fff; // clear auto polling related field:
// (MD_PHY1ADDR & GP1_FRC_EN).
regValue |= 0x20000000; // force to enable MDC/MDIO auto polling.
#if defined (CONFIG_GE2_RGMII_AN) || defined (CONFIG_GE2_MII_AN)
if(ge==2) {
regValue |= (CONFIG_MAC_TO_GIGAPHY_MODE_ADDR2 << 24); // setup PHY address for auto polling.
}
#endif
#if defined (CONFIG_GE1_RGMII_AN) || defined (CONFIG_GE1_MII_AN) || defined (CONFIG_P5_MAC_TO_PHY_MODE)
if(ge==1) {
regValue |= (CONFIG_MAC_TO_GIGAPHY_MODE_ADDR << 24); // setup PHY address for auto polling.
}
#endif
#if defined (CONFIG_RALINK_RT3052) || defined (CONFIG_RALINK_RT3352) || defined (CONFIG_RALINK_RT5350)
sysRegWrite(0xb01100C8, regValue);
#else
if (ge == 2)
sysRegWrite(MDIO_CFG2, regValue);
else
sysRegWrite(MDIO_CFG, regValue);
#endif
}
static void
read_counters_gdma2(PSEUDO_ADAPTER *pPseudoAd)
{
u32 tx_skipped;
u32 rx_fcs_bad;
u32 rx_too_sho;
u32 rx_too_lon;
pPseudoAd->stat.tx_bytes += sysRegRead(GDMA2_TX_GBCNT);
pPseudoAd->stat.tx_packets += sysRegRead(GDMA2_TX_GPCNT);
tx_skipped = sysRegRead(GDMA2_TX_SKIPCNT);
pPseudoAd->stat.collisions += sysRegRead(GDMA2_TX_COLCNT);
pPseudoAd->stat.rx_bytes += sysRegRead(GDMA2_RX_GBCNT);
pPseudoAd->stat.rx_packets += sysRegRead(GDMA2_RX_GPCNT);
pPseudoAd->stat.rx_over_errors += sysRegRead(GDMA2_RX_OERCNT);
rx_fcs_bad = sysRegRead(GDMA2_RX_FERCNT);
rx_too_sho = sysRegRead(GDMA2_RX_SERCNT);
rx_too_lon = sysRegRead(GDMA2_RX_LERCNT);
if (tx_skipped)
pPseudoAd->stat.tx_dropped += tx_skipped;
if (rx_too_sho)
pPseudoAd->stat.rx_length_errors += rx_too_sho;
if (rx_too_lon)
pPseudoAd->stat.rx_length_errors += rx_too_lon;
if (rx_fcs_bad) {
pPseudoAd->stat.rx_errors += rx_fcs_bad;
pPseudoAd->stat.rx_crc_errors += rx_fcs_bad;
}
}
static void
fe_reset(void)
{
u32 val;
val = sysRegRead(REG_RSTCTRL);
/* RT5350/MT7628 (SDMA) need to reset ESW and FE at the same to avoid PDMA panic */
#if defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_MT7628)
val |= RALINK_ESW_RST;
#endif
/* Reset PPE at this point */
#if defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621)
val |= RALINK_PPE_RST;
#endif
/* MT7621 + TRGMII need to reset GMAC */
#if defined (CONFIG_RALINK_MT7621) && defined (CONFIG_GE1_TRGMII_FORCE_1200)
val |= RALINK_ETH_RST;
#endif
val |= RALINK_FE_RST;
sysRegWrite(REG_RSTCTRL, val);
udelay(10);
/* set TRGMII clock */
#if defined (CONFIG_RALINK_MT7621) && defined (CONFIG_GE1_TRGMII_FORCE_1200)
{
u32 val_clk = sysRegRead(REG_CLK_CFG_0);
val_clk &= 0xffffff9f;
val_clk |= (0x1 << 5);
sysRegWrite(REG_CLK_CFG_0, val_clk);
udelay(1000);
}
#endif
#if defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_MT7628) || defined (CONFIG_RALINK_MT7620)
val &= ~(RALINK_ESW_RST);
#endif
#if defined (CONFIG_RALINK_MT7620)
val &= ~(RALINK_EPHY_RST);
#endif
#if defined (CONFIG_RALINK_MT7621)
val &= ~(RALINK_ETH_RST | RALINK_HSDMA_RST);
#endif
#if defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621)
val &= ~(RALINK_PPE_RST);
#endif
val &= ~(RALINK_FE_RST);
sysRegWrite(REG_RSTCTRL, val);
udelay(1000);
}
static int aes_engine_desc_init(void)
{
int i;
u32 regVal;
AES_Entry.AES_tx_ring0 = dma_alloc_coherent(NULL, NUM_AES_TX_DESC * sizeof(struct AES_txdesc), &AES_Entry.phy_aes_tx_ring0, GFP_KERNEL);
if (!AES_Entry.AES_tx_ring0)
goto err_cleanup;
AES_Entry.AES_rx_ring0 = dma_alloc_coherent(NULL, NUM_AES_RX_DESC * sizeof(struct AES_rxdesc), &AES_Entry.phy_aes_rx_ring0, GFP_KERNEL);
if (!AES_Entry.AES_rx_ring0)
goto err_cleanup;
for (i = 0; i < NUM_AES_TX_DESC; i++) {
memset(&AES_Entry.AES_tx_ring0[i], 0, sizeof(struct AES_txdesc));
AES_Entry.AES_tx_ring0[i].txd_info2 |= TX2_DMA_DONE;
}
for (i = 0; i < NUM_AES_RX_DESC; i++) {
memset(&AES_Entry.AES_rx_ring0[i], 0, sizeof(struct AES_rxdesc));
}
AES_Entry.aes_tx_front_idx = 0;
AES_Entry.aes_tx_rear_idx = NUM_AES_TX_DESC-1;
AES_Entry.aes_rx_front_idx = 0;
AES_Entry.aes_rx_rear_idx = NUM_AES_RX_DESC-1;
wmb();
regVal = sysRegRead(AES_GLO_CFG);
regVal &= 0x00000ff0;
sysRegWrite(AES_GLO_CFG, regVal);
regVal = sysRegRead(AES_GLO_CFG);
sysRegWrite(AES_TX_BASE_PTR0, phys_to_bus((u32)AES_Entry.phy_aes_tx_ring0));
sysRegWrite(AES_TX_MAX_CNT0, cpu_to_le32((u32)NUM_AES_TX_DESC));
sysRegWrite(AES_TX_CTX_IDX0, 0);
sysRegWrite(AES_RST_CFG, AES_PST_DTX_IDX0);
sysRegWrite(AES_RX_BASE_PTR0, phys_to_bus((u32)AES_Entry.phy_aes_rx_ring0));
sysRegWrite(AES_RX_MAX_CNT0, cpu_to_le32((u32)NUM_AES_RX_DESC));
sysRegWrite(AES_RX_CALC_IDX0, cpu_to_le32((u32)(NUM_AES_RX_DESC - 1)));
regVal = sysRegRead(AES_RX_CALC_IDX0);
sysRegWrite(AES_RST_CFG, AES_PST_DRX_IDX0);
return 0;
err_cleanup:
aes_engine_desc_free();
return -ENOMEM;
}
void ra2880Mac2AddressSet(MAC_INFO *MACInfo, unsigned char p[6])
{
unsigned long regValue;
regValue = (p[0] << 8) | (p[1]);
sysRegWrite(GDMA2_MAC_ADRH, regValue);
regValue = (p[2] << 24) | (p[3] <<16) | (p[4] << 8) | p[5];
sysRegWrite(GDMA2_MAC_ADRL, regValue);
printk("GDMA2_MAC_ADRH -- : 0x%08x\n", sysRegRead(GDMA2_MAC_ADRH));
printk("GDMA2_MAC_ADRL -- : 0x%08x\n", sysRegRead(GDMA2_MAC_ADRL));
return;
}
static void
fe_dma_stop(void)
{
u32 regValue;
regValue = sysRegRead(PDMA_GLO_CFG);
regValue &= ~(TX_WB_DDONE | RX_DMA_EN | TX_DMA_EN);
sysRegWrite(PDMA_GLO_CFG, regValue);
#if defined (CONFIG_RAETH_QDMA)
regValue = sysRegRead(QDMA_GLO_CFG);
regValue &= ~(TX_WB_DDONE | RX_DMA_EN | TX_DMA_EN);
sysRegWrite(QDMA_GLO_CFG, regValue);
#endif
}
u32 mii_mgr_read(u32 phy_addr, u32 phy_register, u32 *read_data)
{
u32 volatile status = 0;
u32 rc = 0;
unsigned long volatile t_start = jiffies;
u32 volatile data = 0;
/* We enable mdio gpio purpose register, and disable it when exit. */
enable_mdio(1);
// make sure previous read operation is complete
while (1) {
// 0 : Read/write operation complete
if(!( sysRegRead(MDIO_PHY_CONTROL_0) & (0x1 << 31)))
{
break;
}
else if (time_after(jiffies, t_start + 5*HZ)) {
enable_mdio(0);
printk("\n MDIO Read operation is ongoing !!\n");
return rc;
}
}
data = (0x01 << 16) | (0x02 << 18) | (phy_addr << 20) | (phy_register << 25);
sysRegWrite(MDIO_PHY_CONTROL_0, data);
data |= (1<<31);
sysRegWrite(MDIO_PHY_CONTROL_0, data);
//printk("\n Set Command [0x%08X] to PHY !!\n",MDIO_PHY_CONTROL_0);
// make sure read operation is complete
t_start = jiffies;
while (1) {
if (!(sysRegRead(MDIO_PHY_CONTROL_0) & (0x1 << 31))) {
status = sysRegRead(MDIO_PHY_CONTROL_0);
*read_data = (u32)(status & 0x0000FFFF);
enable_mdio(0);
return 1;
}
else if (time_after(jiffies, t_start+5*HZ)) {
enable_mdio(0);
printk("\n MDIO Read operation is ongoing and Time Out!!\n");
return 0;
}
}
}
static int et_virt_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam *epause)
{
int mdio_cfg_reg;
int mii_an_reg;
PSEUDO_ADAPTER *pseudo = dev->priv;
//printk("et_set_pauseparam(): autoneg=%d, tx_pause=%d, rx_pause=%d\n", epause->autoneg, epause->tx_pause, epause->rx_pause);
// auto-neg pause
mii_mgr_read(pseudo->mii_info.phy_id, AUTO_NEGOTIATION_ADVERTISEMENT, &mii_an_reg);
if(epause->autoneg)
mii_an_reg |= AN_PAUSE;
else
mii_an_reg &= ~AN_PAUSE;
mii_mgr_write(pseudo->mii_info.phy_id, AUTO_NEGOTIATION_ADVERTISEMENT, mii_an_reg);
// tx/rx pause
mdio_cfg_reg = sysRegRead(MDIO_CFG);
if(epause->tx_pause)
mdio_cfg_reg |= MDIO_CFG_GP1_FC_TX;
else
mdio_cfg_reg &= ~MDIO_CFG_GP1_FC_TX;
if(epause->rx_pause)
mdio_cfg_reg |= MDIO_CFG_GP1_FC_RX;
else
mdio_cfg_reg &= ~MDIO_CFG_GP1_FC_RX;
sysRegWrite(MDIO_CFG, mdio_cfg_reg);
return 0;
}
static void RaWdgStart(void)
{
#if defined (CONFIG_RALINK_RT6855A)
int HwConf;
#endif
printk(KERN_INFO "Started WatchDog Timer.\n");
SetTimerMode(TMR1CTL,WATCHDOG);
#if defined (CONFIG_RALINK_RT2880) || defined (CONFIG_RALINK_RT2883) || \
defined (CONFIG_RALINK_RT3052) || defined (CONFIG_RALINK_RT3883)
/*
* For user easy configuration, We assume the unit of watch dog timer is 1s,
* so we need to calculate the TMR1LOAD value.
*
* Unit= 1/(SysClk/65536), 1 Sec = (SysClk)/65536
*
*/
SetWdgTimerClock(TMR1CTL,SYS_CLK_DIV65536);
WdgLoadValue = WATCHDOG_TIMEOUT * (get_surfboard_sysclk()/65536);
#elif defined (CONFIG_RALINK_RT6855A)
HwConf = sysRegRead(RALINK_SYSCTL_BASE + 0x8c);
if(((HwConf >> 24) & 0x3) == 0) { //SDR
WdgLoadValue = WATCHDOG_TIMEOUT * (140 * 1000 * 1000 / 2);
}else {
if(((HwConf >> 26) & 0x1) == 0) {
static void
wait_dma_stop(int cycles_10ms)
{
int i;
u32 regVal;
for (i = 0; i < cycles_10ms; i++) {
regVal = sysRegRead(PDMA_GLO_CFG);
#if defined (CONFIG_RAETH_QDMA)
regVal |= sysRegRead(QDMA_GLO_CFG);
#endif
if (!(regVal & (RX_DMA_BUSY | TX_DMA_BUSY)))
break;
msleep(10);
}
}
void ra2880EnableInterrupt()
{
unsigned int regValue = sysRegRead(FE_INT_ENABLE);
RAETH_PRINT("FE_INT_ENABLE -- : 0x%08x\n", regValue);
// regValue |= (RX_DONE_INT0 | TX_DONE_INT0);
sysRegWrite(FE_INT_ENABLE, regValue);
}
void SetWdgTimerClock(int prescale)
{
unsigned int result;
result=sysRegRead(TMR1CTL);
result &= 0x0000FFFF;
result |= (prescale << 16); //unit = 1u
sysRegWrite(TMR1CTL, result);
}
void set_wdg_timer_mode(unsigned int timer, enum timer_mode mode)
{
unsigned int result;
result = sysRegRead(timer);
result &= ~(0x3<<4);
result |= (mode << 4);
sysRegWrite(timer, result);
}
void set_wdg_timer_clock_prescale(unsigned int timer, enum timer_clock_freq prescale)
{
unsigned int result;
result = sysRegRead(timer);
result &= ~0xF;
result |= (prescale & 0xF);
sysRegWrite(timer, result);
}
void set_wdg_timer_clock_prescale(int prescale)
{
unsigned int result;
result = sysRegRead(TMR1CTL);
result &= 0x0000FFFF;
result |= (prescale << 16); //unit = 1u
sysRegWrite(TMR1CTL, result);
}
void SetWdgTimerClock(unsigned int timer, enum timer_clock_freq prescale)
{
unsigned int result;
result=sysRegRead(timer);
result &= ~0xF;
result=result | (prescale&0xF);
sysRegWrite(timer,result);
}
void SetTimerMode(unsigned int timer, enum timer_mode mode)
{
unsigned int result;
result=sysRegRead(timer);
result &= ~(0x3<<4); //watchdog mode
result=result | (mode << 4);
sysRegWrite(timer,result);
}
static int
ar2315_wdt_release(struct inode *inode, struct file *file)
{
if (!strcmp (get_arch_type (), "Atheros AR5315"))
{
printk("%s: release with %d left\n", __FUNCTION__, CYCLES_TO_S(sysRegRead(AR5315_WD)));
}else
{
printk("%s: release with %d left\n", __FUNCTION__, CYCLES_TO_S(sysRegRead(AR531X_WD)));
}
// uncomment the below if closing this device should prevent the
// watchdog from rebooting the system
//started = 0;
//sysRegWrite(AR5315_WDC, AR531X_WD_CTRL_DEFAULT);
//sysRegWrite(AR5315_WD, 0);
clear_bit(0, &wdt_is_open);
return 0;
}
u32 mii_mgr_write(u32 phy_addr, u32 phy_register, u32 write_data)
{
unsigned long volatile t_start=jiffies;
u32 volatile data;
enable_mdio(1);
// make sure previous write operation is complete
while(1) {
if (!(sysRegRead(MDIO_PHY_CONTROL_0) & (0x1 << 31)))
{
break;
}
else if (time_after(jiffies, t_start + 5 * HZ)) {
enable_mdio(0);
printk("\n MDIO Write operation ongoing\n");
return 0;
}
}
data = (0x01 << 16)| (1<<18) | (phy_addr << 20) | (phy_register << 25) | write_data;
sysRegWrite(MDIO_PHY_CONTROL_0, data);
data |= (1<<31);
sysRegWrite(MDIO_PHY_CONTROL_0, data); //start operation
//printk("\n Set Command [0x%08X] to PHY !!\n",MDIO_PHY_CONTROL_0);
t_start = jiffies;
// make sure write operation is complete
while (1) {
if (!(sysRegRead(MDIO_PHY_CONTROL_0) & (0x1 << 31))) //0 : Read/write operation complete
{
enable_mdio(0);
return 1;
}
else if (time_after(jiffies, t_start + 5 * HZ)) {
enable_mdio(0);
printk("\n MDIO Write operation Time Out\n");
return 0;
}
}
}
void SetWdgTimerClock(unsigned int timer, enum timer_clock_freq prescale)
{
#if !defined (CONFIG_RALINK_RT63365)
unsigned int result;
result=sysRegRead(timer);
result &= ~0xF;
result=result | (prescale&0xF);
sysRegWrite(timer,result);
#endif
}
void enable_mdio(int enable)
{
#if !defined (CONFIG_P5_MAC_TO_PHY_MODE)
u32 data = sysRegRead(GPIO_PRUPOSE);
if (enable)
data &= ~GPIO_MDIO_BIT;
else
data |= GPIO_MDIO_BIT;
sysRegWrite(GPIO_PRUPOSE, data);
#endif
}
void SetTimerMode(unsigned int timer, enum timer_mode mode)
{
#if !defined (CONFIG_RALINK_RT63365)
unsigned int result;
result=sysRegRead(timer);
result &= ~(0x3<<4); //watchdog mode
result=result | (mode << 4);
sysRegWrite(timer,result);
#endif
}
static void aes_engine_stop(void)
{
int i;
u32 regValue;
regValue = sysRegRead(AES_GLO_CFG);
regValue &= ~(AES_TX_WB_DDONE | AES_RX_DMA_EN | AES_TX_DMA_EN);
sysRegWrite(AES_GLO_CFG, regValue);
/* wait AES stopped */
for (i = 0; i < 50; i++) {
msleep(1);
regValue = sysRegRead(AES_GLO_CFG);
if (!(regValue & (AES_RX_DMA_BUSY | AES_TX_DMA_BUSY)))
break;
}
/* disable AES interrupt */
sysRegWrite(AES_INT_MASK, 0);
}
static void aes_engine_reset(void)
{
u32 val;
val = sysRegRead(REG_CLKCTRL);
val |= RALINK_CRYPTO_CLK_EN;
sysRegWrite(REG_CLKCTRL, val);
udelay(10);
val = sysRegRead(REG_RSTCTRL);
val |= RALINK_CRYPTO_RST;
sysRegWrite(REG_RSTCTRL, val);
udelay(10);
val &= ~(RALINK_CRYPTO_RST);
sysRegWrite(REG_RSTCTRL, val);
udelay(100);
}
static int et_virt_set_rx_csum(struct net_device *dev, u32 data)
{
int value;
//printk("et_set_rx_csum(): data = %d\n", data);
value = sysRegRead(GDMA2_FWD_CFG);
if(data)
value |= GDM1_STRPCRC;
else
value &= ~GDM1_STRPCRC;
sysRegWrite(GDMA1_FWD_CFG, value);
return 0;
}
void ra2880stop(END_DEVICE *ei_local)
{
unsigned int regValue;
printk("ra2880stop()...");
regValue = sysRegRead(PDMA_GLO_CFG);
regValue &= ~(TX_WB_DDONE | RX_DMA_EN | TX_DMA_EN);
sysRegWrite(PDMA_GLO_CFG, regValue);
printk("Done\n");
// printk("Done0x%x...\n", readreg(PDMA_GLO_CFG));
}
static void esw_ephy_reset(void)
{
/* reset EPHY */
u32 val = sysRegRead(REG_RSTCTRL);
val |= RALINK_EPHY_RST;
sysRegWrite(REG_RSTCTRL, val);
udelay(10);
val &= ~(RALINK_EPHY_RST);
sysRegWrite(REG_RSTCTRL, val);
udelay(100);
}
/******************************************************************************
* ae531x_reset -- Cold reset ethernet interface
*/
void
ae531x_reset(ae531x_MAC_t *MACInfo)
{
UINT32 mask = 0;
UINT32 regtmp;
if (MACInfo->unit == 0) {
mask = RESET_ENET0 | RESET_EPHY0;
} else {
mask = RESET_ENET1 | RESET_EPHY1;
#ifdef TWISTED_ENET_MACS
mask |= RESET_ENET0 | RESET_EPHY0;
#endif
}
/* Put into reset */
regtmp = sysRegRead(AR531X_RESET);
sysRegWrite(AR531X_RESET, regtmp | mask);
sysMsDelay(15);
/* Pull out of reset */
regtmp = sysRegRead(AR531X_RESET);
sysRegWrite(AR531X_RESET, regtmp & ~mask);
sysUDelay(25);
/* Enable */
if (MACInfo->unit == 0) {
mask = ENABLE_ENET0;
} else {
mask = ENABLE_ENET1;
#ifdef TWISTED_ENET_MACS
mask |= ENABLE_ENET0;
#endif
}
regtmp = sysRegRead(AR531X_ENABLE);
sysRegWrite(AR531X_ENABLE, regtmp | mask);
}
static void ar2315_wdt_print_info(void)
{
printk("watchdog hb: %d", heartbeat);
if (!strcmp (get_arch_type (), "Atheros AR5315"))
{
printk(" ISR: 0x%x", sysRegRead(AR5315_ISR));
printk(" IMR: 0x%x", sysRegRead(AR5315_IMR));
printk(" WD : 0x%x", sysRegRead(AR5315_WD));
printk(" WDC: 0x%x\n", sysRegRead(AR5315_WDC));
}else{
printk(" ISR: 0x%x", sysRegRead(AR531X_ISR));
printk(" IMR: 0x%x", sysRegRead(AR531X_IMR));
printk(" WD : 0x%x", sysRegRead(AR531X_WD));
printk(" WDC: 0x%x\n", sysRegRead(AR531X_WDC));
}
}
