virtual void visit(AstCell* nodep) {
if (nodep->modp()->user1()) { // Marked with inline request
UINFO(5," Inline CELL "<<nodep<<endl);
UINFO(5," To MOD "<<m_modp<<endl);
++m_statCells;
// Before cloning simplify pin assignments
// Better off before, as if module has multiple instantiations
// we'll save work, and we can't call pinReconnectSimple in
// this loop as it clone()s itself.
for (AstPin* pinp = nodep->pinsp(); pinp; pinp=pinp->nextp()->castPin()) {
if (!pinp->exprp()) continue;
V3Inst::pinReconnectSimple(pinp, nodep, m_modp, false);
}
// Clone original module
if (debug()>=9) { nodep->dumpTree(cout,"inlcell:"); }
//if (debug()>=9) { nodep->modp()->dumpTree(cout,"oldmod:"); }
AstNodeModule* newmodp = nodep->modp()->cloneTree(false);
if (debug()>=9) { newmodp->dumpTree(cout,"newmod:"); }
// Clear var markings and find cell cross references
AstNode::user2ClearTree();
AstNode::user4ClearTree();
{ InlineCollectVisitor(nodep->modp()); } // {} to destroy visitor immediately
// Create data for dotted variable resolution
AstCellInline* inlinep = new AstCellInline(nodep->fileline(),
nodep->name(), nodep->modp()->origName());
m_modp->addInlinesp(inlinep); // Must be parsed before any AstCells
// Create assignments to the pins
for (AstPin* pinp = nodep->pinsp(); pinp; pinp=pinp->nextp()->castPin()) {
if (!pinp->exprp()) continue;
UINFO(6," Pin change from "<<pinp->modVarp()<<endl);
// Make new signal; even though we'll optimize the interconnect, we
// need an alias to trace correctly. If tracing is disabled, we'll
// delete it in later optimizations.
AstVar* pinOldVarp = pinp->modVarp();
AstVar* pinNewVarp = pinOldVarp->clonep();
if (!pinNewVarp) pinOldVarp->v3fatalSrc("Cloning failed");
AstNode* connectRefp = pinp->exprp();
if (!connectRefp->castConst() && !connectRefp->castVarRef()) {
pinp->v3fatalSrc("Unknown interconnect type; pinReconnectSimple should have cleared up");
}
if (pinNewVarp->isOutOnly() && connectRefp->castConst()) {
pinp->v3error("Output port is connected to a constant pin, electrical short");
}
// Propagate any attributes across the interconnect
pinNewVarp->propagateAttrFrom(pinOldVarp);
if (connectRefp->castVarRef()) {
connectRefp->castVarRef()->varp()->propagateAttrFrom(pinOldVarp);
}
// One to one interconnect won't make a temporary variable.
// This prevents creating a lot of extra wires for clock signals.
// It will become a tracing alias.
UINFO(6,"One-to-one "<<connectRefp<<endl);
UINFO(6," -to "<<pinNewVarp<<endl);
pinNewVarp->user2p(connectRefp);
// Public output inside the cell must go via an assign rather than alias
// Else the public logic will set the alias, losing the value to be propagated up
// (InOnly isn't a problem as the AssignAlias will create the assignment for us)
pinNewVarp->user3(pinNewVarp->isSigUserRWPublic() && pinNewVarp->isOutOnly());
}
// Cleanup var names, etc, to not conflict
{ InlineRelinkVisitor(newmodp, m_modp, nodep); }
// Move statements to top module
if (debug()>=9) { newmodp->dumpTree(cout,"fixmod:"); }
AstNode* stmtsp = newmodp->stmtsp();
if (stmtsp) stmtsp->unlinkFrBackWithNext();
if (stmtsp) m_modp->addStmtp(stmtsp);
// Remove the cell
newmodp->deleteTree(); VL_DANGLING(newmodp); // Clear any leftover ports, etc
nodep->unlinkFrBack();
pushDeletep(nodep); VL_DANGLING(nodep);
if (debug()>=9) { m_modp->dumpTree(cout,"donemod:"); }
}
}
static AstAssignW* pinReconnectSimple(AstPin* pinp, AstCell* cellp, AstNodeModule*,
bool forTristate, bool alwaysCvt) {
// If a pin connection is "simple" leave it as-is
// Else create a intermediate wire to perform the interconnect
// Return the new assignment, if one was made
// Note this module calles cloneTree() via new AstVar
AstVar* pinVarp = pinp->modVarp();
AstVarRef* connectRefp = pinp->exprp()->castVarRef();
AstBasicDType* pinBasicp = pinVarp->dtypep()->basicp(); // Maybe NULL
AstBasicDType* connBasicp = NULL;
AstAssignW* assignp = NULL;
if (connectRefp) connBasicp = connectRefp->varp()->dtypep()->basicp();
//
if (!alwaysCvt
&& connectRefp
&& connectRefp->varp()->dtypep()->sameTree(pinVarp->dtypep())
&& !connectRefp->varp()->isSc()) { // Need the signal as a 'shell' to convert types
// Done. Same data type
} else if (!alwaysCvt
&& connectRefp
&& connectRefp->varp()->isIfaceRef()) {
// Done. Interface
} else if (!alwaysCvt
&& connBasicp
&& pinBasicp
&& connBasicp->width() == pinBasicp->width()
&& connBasicp->lsb() == pinBasicp->lsb()
&& !connectRefp->varp()->isSc() // Need the signal as a 'shell' to convert types
&& connBasicp->width() == pinVarp->width()
&& 1) {
// Done. One to one interconnect won't need a temporary variable.
} else if (!alwaysCvt && !forTristate && pinp->exprp()->castConst()) {
// Done. Constant.
} else {
// Make a new temp wire
//if (1||debug()>=9) { pinp->dumpTree(cout,"-in_pin:"); }
AstNode* pinexprp = pinp->exprp()->unlinkFrBack();
string newvarname = ((string)(pinVarp->isOutput() ? "__Vcellout" : "__Vcellinp")
+(forTristate?"t":"") // Prevent name conflict if both tri & non-tri add signals
+"__"+cellp->name()+"__"+pinp->name());
AstVar* newvarp = new AstVar (pinVarp->fileline(), AstVarType::MODULETEMP, newvarname, pinVarp);
// Important to add statement next to cell, in case there is a generate with same named cell
cellp->addNextHere(newvarp);
if (pinVarp->isInout()) {
pinVarp->v3fatalSrc("Unsupported: Inout connections to pins must be direct one-to-one connection (without any expression)");
} else if (pinVarp->isOutput()) {
// See also V3Inst
AstNode* rhsp = new AstVarRef(pinp->fileline(), newvarp, false);
UINFO(5,"pinRecon width "<<pinVarp->width()<<" >? "<<rhsp->width()<<" >? "<<pinexprp->width()<<endl);
rhsp = extendOrSel (pinp->fileline(), rhsp, pinVarp);
pinp->exprp(new AstVarRef (newvarp->fileline(), newvarp, true));
AstNode* rhsSelp = extendOrSel (pinp->fileline(), rhsp, pinexprp);
assignp = new AstAssignW (pinp->fileline(), pinexprp, rhsSelp);
} else {
// V3 width should have range/extended to make the widths correct
assignp = new AstAssignW (pinp->fileline(),
new AstVarRef(pinp->fileline(), newvarp, true),
pinexprp);
pinp->exprp(new AstVarRef (pinexprp->fileline(), newvarp, false));
}
if (assignp) cellp->addNextHere(assignp);
//if (debug()) { pinp->dumpTree(cout,"- out:"); }
//if (debug()) { assignp->dumpTree(cout,"- aout:"); }
}
return assignp;
}
void V3Inst::pinReconnectSimple(AstPin* pinp, AstCell* cellp, AstNodeModule* modp) {
// If a pin connection is "simple" leave it as-is
// Else create a intermediate wire to perform the interconnect
// Note this module calles cloneTree() via new AstVar
AstVar* pinVarp = pinp->modVarp();
AstVarRef* connectRefp = pinp->exprp()->castVarRef();
AstBasicDType* pinBasicp = pinVarp->dtypep()->basicp(); // Maybe NULL
AstBasicDType* connBasicp = NULL;
if (connectRefp) connBasicp = connectRefp->varp()->dtypep()->basicp();
//
if (connectRefp
&& connectRefp->varp()->dtypep()->sameTree(pinVarp->dtypep())
&& !connectRefp->varp()->isSc()) { // Need the signal as a 'shell' to convert types
// Done. Same data type
} else if (connBasicp
&& pinBasicp
&& connBasicp->width() == pinBasicp->width()
&& connBasicp->lsb() == pinBasicp->lsb()
&& !connectRefp->varp()->isSc() // Need the signal as a 'shell' to convert types
&& pinp->width() == pinVarp->width()
&& 1) {
// Done. One to one interconnect won't need a temporary variable.
} else if (pinp->exprp()->castConst()) {
// Done. Constant.
} else {
// Make a new temp wire
//if (1||debug()>=9) { pinp->dumpTree(cout,"in_pin:"); }
AstAssignW* assignp = NULL;
AstNode* pinexprp = pinp->exprp()->unlinkFrBack();
string newvarname = "__Vcellinp__"+cellp->name()+"__"+pinp->name();
AstVar* newvarp = new AstVar (pinVarp->fileline(), AstVarType::MODULETEMP, newvarname, pinVarp);
modp->addStmtp(newvarp);
if (pinVarp->isInout()) {
pinVarp->v3fatalSrc("Unsupported: Inout connections to pins must be direct one-to-one connection (without any expression)");
} else if (pinVarp->isOutput()) {
// See also V3Inst
AstNode* rhsp = new AstVarRef(pinp->fileline(), newvarp, false);
if (pinp->width() > rhsp->width()) {
if (rhsp->isSigned()) {
rhsp = new AstExtendS(pinp->fileline(), rhsp);
} else {
rhsp = new AstExtend (pinp->fileline(), rhsp);
}
} else if (pinp->width() < rhsp->width()) {
rhsp = new AstSel (pinp->fileline(), rhsp, 0, pinp->width());
}
rhsp->widthSignedFrom(pinp);
assignp = new AstAssignW (pinp->fileline(), pinexprp, rhsp);
pinp->exprp(new AstVarRef (pinexprp->fileline(), newvarp, true));
} else {
// V3 width should have range/extended to make the widths correct
if (pinexprp->width() != pinVarp->width()) pinp->v3fatalSrc("Input pin width mismatch");
assignp = new AstAssignW (pinp->fileline(),
new AstVarRef(pinp->fileline(), newvarp, true),
pinexprp);
pinp->exprp(new AstVarRef (pinexprp->fileline(), newvarp, false));
}
pinp->widthSignedFrom(pinp->exprp());
if (assignp) modp->addStmtp(assignp);
//if (1||debug()) { pinp->dumpTree(cout," out:"); }
//if (1||debug()) { assignp->dumpTree(cout," aout:"); }
}
}