Ejemplo n.º 1
0
//-----------------------------------------------------------------------------
// Purpose: Called when an entity stops touching us.
// Input  : pOther - The entity that was touching us.
//-----------------------------------------------------------------------------
void CTriggerWateryDeath::EndTouch( CBaseEntity *pOther )
{
	if ( IsTouching( pOther ) )
	{
		EHANDLE hOther;
		hOther = pOther;

		// Remove the time from our list
		int iIndex = m_hTouchingEntities.Find( hOther );
		if ( iIndex != m_hTouchingEntities.InvalidIndex() )
		{
			m_flEntityKillTimes.Remove( iIndex );
		}
	}

#ifdef HL2_DLL
	if ( pOther->IsPlayer() )
	{
		for (int i = 0; i < m_hLeeches.Count(); i++ )
		{
			CWateryDeathLeech *pLeech = dynamic_cast<CWateryDeathLeech*>( m_hLeeches[i].Get() );

			if ( pLeech )
			{
				pLeech->m_iFadeState = -1;
			}
		}

		if ( m_hLeeches.Count() > 0 )
			 m_hLeeches.Purge();

		CHL2_Player *pHL2Player = dynamic_cast<CHL2_Player*>( pOther );

		if ( pHL2Player )
		{
			//Adrian: Hi, you might be wondering why I'm doing this, yes?
			//        Well, EndTouch is called not only when the player leaves
			//		  the trigger, but also on level shutdown. We can't let the
			//		  soundpatch fade the sound out since we'll hit a nasty assert
			//        cause it'll try to fade out a sound using an entity that might
			//        be gone since we're shutting down the server.
			if ( !(pHL2Player->GetFlags() & FL_DONTTOUCH ) )
				  pHL2Player->StopWaterDeathSounds();
		}
	}
#endif

	BaseClass::EndTouch( pOther );
}
//------------------------------------------------------------------------------
// Purpose :
//------------------------------------------------------------------------------
void CNPC_CraneDriver::Spawn( void )
{
	BaseClass::Spawn();

	CapabilitiesClear();
	CapabilitiesAdd( bits_CAP_INNATE_RANGE_ATTACK1 );

	m_flDistTooFar = 2048.0;
	SetDistLook( 2048 );

	m_PreviouslyPickedUpObjects.Purge();
	m_hPickupTarget = NULL;
	m_bForcedPickup = false;
	m_bForcedDropoff = false;
}
Ejemplo n.º 3
0
// Reset the whole system (level change, etc.)
void CSoundControllerImp::SystemReset( void )
{
	for ( int i = m_soundList.Count()-1; i >=0; i-- )
	{
		CSoundPatch *pNode = m_soundList[i];
	
		// shutdown all active sounds
		pNode->Shutdown();
	}

	// clear the list
	m_soundList.Purge();

	// clear the command queue
	m_commandList.RemoveAll();
}
Ejemplo n.º 4
0
//-----------------------------------------------------------------------------
// Purpose: 
//-----------------------------------------------------------------------------
void Decal_Shutdown( void )
{
	for ( int index = g_DecalDictionary.FirstInorder(); index != g_DecalDictionary.InvalidIndex(); index = g_DecalDictionary.NextInorder(index) )
	{
		IMaterial *mat = g_DecalDictionary[index].material;
		if ( mat )
		{
			GL_UnloadMaterial( mat );
		}
#ifdef _DEBUG
		delete[] g_DecalDictionary[index].m_pDebugName;
#endif
	}
	g_DecalLookup.Purge();
	g_DecalDictionary.RemoveAll();
}
Ejemplo n.º 5
0
//-----------------------------------------------------------------------------
// Purpose: Generate a list of file matching mask
//-----------------------------------------------------------------------------
int CScriptLib::FindFiles( char* pFileMask, bool bRecurse, CUtlVector<fileList_t> &fileList )
{
	char	dirPath[MAX_PATH];
	char	pattern[MAX_PATH];
	char	extension[MAX_PATH];

	// get path only
	strcpy( dirPath, pFileMask );
	V_StripFilename( dirPath );

	// get pattern only
	V_FileBase( pFileMask, pattern, sizeof( pattern ) );
	V_ExtractFileExtension( pFileMask, extension, sizeof( extension ) );
	if ( extension[0] )
	{
		strcat( pattern, "." );
		strcat( pattern, extension );
	}

	if ( !bRecurse )
	{
		GetFileList( dirPath, pattern, fileList );
	}
	else
	{
		// recurse and get the tree
		CUtlVector< fileList_t > tempList;
		CUtlVector< CUtlString > dirList;
		RecurseFileTree_r( dirPath, 0, dirList );
		for ( int i=0; i<dirList.Count(); i++ )
		{
			// iterate each directory found
			tempList.Purge();
			tempList.EnsureCapacity( dirList.Count() );

			GetFileList( dirList[i].String(), pattern, tempList );

			int start = fileList.AddMultipleToTail( tempList.Count() );
			for ( int j=0; j<tempList.Count(); j++ )
			{
				fileList[start+j] = tempList[j];
			}
		}	
	}

	return fileList.Count();
}
Ejemplo n.º 6
0
//================================================================================
//================================================================================
void CefBasePanel::OnThink()
{
    VPROF_BUDGET( __FUNCTION__, VPROF_BUDGETGROUP_CEF );

    // Hay comandos que deben ejecutarse
    if ( g_QueueCommands.Count() > 0 )
    {
        for ( int it = 0; it < g_QueueCommands.Count(); ++it )
        {
            const char *pCommand = g_QueueCommands[it];

            engine->ExecuteClientCmd( pCommand );
            DevMsg( "[OnThink] engine.command: %s\n", pCommand );
        }

        g_QueueCommands.Purge();
    }
}
Ejemplo n.º 7
0
//-----------------------------------------------------------------------------
// Purpose: 
//-----------------------------------------------------------------------------
void Decal_Shutdown( void )
{
	g_DecalLookup.Purge();

	int c = g_DecalDictionary.Count();

	int decal;
	for ( decal = 0; decal < c; decal++ )
	{
		IMaterial *mat = g_DecalDictionary[ decal ].material;
		if ( mat )
		{
			GL_UnloadMaterial( mat );
		}
	}

	g_DecalDictionary.Purge();
}
Ejemplo n.º 8
0
bool CVRadDLL::Serialize()
{
	if( !g_pIncremental )
		return false;

	if( g_LastGoodLightData.Count() > 0 )
	{
		pdlightdata->CopyArray( g_LastGoodLightData.Base(), g_LastGoodLightData.Count() );

		if( g_pIncremental->Serialize() )
		{
			// Delete this so it doesn't keep re-saving it.
			g_LastGoodLightData.Purge();
			return true;
		}
	}

	return false;
}
Ejemplo n.º 9
0
void EatTextModeKeyPresses()
{
	if ( !g_bTextMode )
		return;
	
	static bool bFirstRun = true;
	if ( bFirstRun )
	{
		bFirstRun = false;
		MoveConsoleWindowToFront();
	}

	char ch;
	while ( (ch = NextGetch()) != -1 )
	{
		if ( ch == 8 )
		{
			// Backspace..
			if ( g_TextModeLine.Count() )
			{
				g_TextModeLine.Remove( g_TextModeLine.Count() - 1 );
			}
		}
		else if ( ch == '\r' )
		{
			// Finish the line.
			if ( g_TextModeLine.Count() )
			{
				g_TextModeLine.AddMultipleToTail( 2, "\n" );
				Cbuf_AddText( g_TextModeLine.Base() );
				g_TextModeLine.Purge();
			}
			printf( "\n" );
		}
		else
		{
			g_TextModeLine.AddToTail( ch );
		}

		printf( "%c", ch );
	}	
}
Ejemplo n.º 10
0
//-----------------------------------------------------------------------------
//	ExcludePathsDlg_SaveChanges
//
//-----------------------------------------------------------------------------
void ExcludePathsDlg_SaveChanges( HWND hWnd )
{
	g_ExcludePaths.Purge();
	HWND hWndTree = GetDlgItem( hWnd, IDC_PATHS_TREE );
	ExcludePathsDlg_BuildExcludeList_r( hWndTree, TreeView_GetRoot( hWndTree ), 0, "" );

	char szPath[MAX_PATH];
	V_ComposeFileName( g_localPath, EXCLUDEPATHS_FILE, szPath, sizeof( szPath ) );

	if ( !g_ExcludePaths.Count() )
	{
		// no exclude paths
		unlink( szPath );
	}
	else
	{
		FILE *fp = fopen( szPath, "wt" );
		if ( !fp )
		{
			Sys_MessageBox( "Error", "Could not open '%s' for writing\n", szPath );
			return;
		}

		fprintf( fp, "// Auto-Generated by VXConsole - DO NOT MODIFY!\n" );
		for ( int i = 0; i < g_ExcludePaths.Count(); i++ )
		{
			// strip expected root path
			const char *pPath = g_ExcludePaths[i].String();
			pPath += strlen( ROOT_NAME );
			if ( !pPath[0] )
			{
				// special code for root
				fprintf( fp, "*\n" );
				break;
			}
			fprintf( fp, "\"\\%s\"\n", pPath );
		}
		fclose( fp );
	}
}
Ejemplo n.º 11
0
void V_SplitString2( const char *pString, const char **pSeparators, int nSeparators, CUtlVector<char*> &outStrings )
{
	outStrings.Purge();
	const char *pCurPos = pString;
	while ( 1 )
	{
		int iFirstSeparator = -1;
		const char *pFirstSeparator = 0;
		for ( int i=0; i < nSeparators; i++ )
		{
			const char *pTest = V_stristr( pCurPos, pSeparators[i] );
			if ( pTest && (!pFirstSeparator || pTest < pFirstSeparator) )
			{
				iFirstSeparator = i;
				pFirstSeparator = pTest;
			}
		}

		if ( pFirstSeparator )
		{
			// Split on this separator and continue on.
			int separatorLen = strlen( pSeparators[iFirstSeparator] );
			if ( pFirstSeparator > pCurPos )
			{
				outStrings.AddToTail( AllocString( pCurPos, pFirstSeparator-pCurPos ) );
			}

			pCurPos = pFirstSeparator + separatorLen;
		}
		else
		{
			// Copy the rest of the string
			if ( strlen( pCurPos ) )
			{
				outStrings.AddToTail( AllocString( pCurPos, -1 ) );
			}
			return;
		}
	}
}
Ejemplo n.º 12
0
//-----------------------------------------------------------------------------
//	ExcludePathsDlg_Setup
//
//-----------------------------------------------------------------------------
void ExcludePathsDlg_Setup( HWND hWnd )
{
	TreeView_SetBkColor( GetDlgItem( hWnd, IDC_PATHS_TREE ), g_backgroundColor );

	CheckDlgButton( hWnd, IDC_PATHS_LINKGAMEDIRS, g_bLinkGameDirs ? BST_CHECKED : BST_UNCHECKED );

	// read the exisiting exclude paths
	g_ExcludePaths.Purge();
	char szFilename[MAX_PATH];
	V_ComposeFileName( g_localPath, EXCLUDEPATHS_FILE, szFilename, sizeof( szFilename ) );
	if ( Sys_Exists( szFilename ) )
	{
		Sys_LoadScriptFile( szFilename );
		while ( 1 ) 
		{
			char *pToken = Sys_GetToken( true );
			if ( !pToken || !pToken[0] )
			{
				break;
			}
			Sys_StripQuotesFromToken( pToken );
			if ( !stricmp( pToken, "*" ) )
			{
				pToken = "";
			}
			else if ( pToken[0] == '\\' )
			{
				pToken++;
			}
		
			char szPath[MAX_PATH];
			V_ComposeFileName( ROOT_NAME, pToken, szPath, sizeof( szPath ) );
			V_FixSlashes( szPath );

			g_ExcludePaths.AddToTail( szPath );
		}
	}
}
Ejemplo n.º 13
0
//-----------------------------------------------------------------------------
// Purpose: Get list of files from current path that match pattern
//-----------------------------------------------------------------------------
int CScriptLib::GetFileList( const char* pDirPath, const char* pPattern, CUtlVector< fileList_t > &fileList )
{
	char	sourcePath[MAX_PATH];
	char	fullPath[MAX_PATH];
	bool	bFindDirs;

	fileList.Purge();

	strcpy( sourcePath, pDirPath );
	int len = (int)strlen( sourcePath );
	if ( !len )
	{
		strcpy( sourcePath, ".\\" );
	}
	else if ( sourcePath[len-1] != '\\' )
	{
		sourcePath[len]   = '\\';
		sourcePath[len+1] = '\0';
	}

	strcpy( fullPath, sourcePath );
	if ( pPattern[0] == '\\' && pPattern[1] == '\0' )
	{
		// find directories only
		bFindDirs = true;
		strcat( fullPath, "*" );
	}
	else
	{
		// find files, use provided pattern
		bFindDirs = false;
		strcat( fullPath, pPattern );
	}

#ifdef WIN32
	struct _finddata_t findData;
	intptr_t h = _findfirst( fullPath, &findData );
	if ( h == -1 )
	{
		return 0;
	}

	do
	{
		// dos attribute complexities i.e. _A_NORMAL is 0
		if ( bFindDirs )
		{
			// skip non dirs
			if ( !( findData.attrib & _A_SUBDIR ) )
				continue;
		}
		else
		{
			// skip dirs
			if ( findData.attrib & _A_SUBDIR )
				continue;
		}

		if ( !stricmp( findData.name, "." ) )
			continue;

		if ( !stricmp( findData.name, ".." ) )
			continue;

		char fileName[MAX_PATH];
		strcpy( fileName, sourcePath );
		strcat( fileName, findData.name );

		int j = fileList.AddToTail();
		fileList[j].fileName.Set( fileName );
		fileList[j].timeWrite = findData.time_write;
	}
	while ( !_findnext( h, &findData ) );

	_findclose( h );
#elif defined(POSIX)
	FIND_DATA findData;
	Q_FixSlashes( fullPath );
	void *h = FindFirstFile( fullPath, &findData );
	if ( (int)h == -1 )
	{
		return 0;
	}

	do
	{
		// dos attribute complexities i.e. _A_NORMAL is 0
		if ( bFindDirs )
		{
			// skip non dirs
			if ( !( findData.dwFileAttributes & S_IFDIR ) )
				continue;
		}
		else
		{
			// skip dirs
			if ( findData.dwFileAttributes & S_IFDIR )
				continue;
		}

		if ( !stricmp( findData.cFileName, "." ) )
			continue;

		if ( !stricmp( findData.cFileName, ".." ) )
			continue;

		char fileName[MAX_PATH];
		strcpy( fileName, sourcePath );
		strcat( fileName, findData.cFileName );

		int j = fileList.AddToTail();
		fileList[j].fileName.Set( fileName );
		struct stat statbuf;
		if ( stat( fileName, &statbuf ) )
#ifdef OSX
			fileList[j].timeWrite = statbuf.st_mtimespec.tv_sec;
#else
			fileList[j].timeWrite = statbuf.st_mtime;
#endif
		else
			fileList[j].timeWrite = 0;
	}
Ejemplo n.º 14
0
void C_SceneEntity::WipeQueuedEvents()
{
	m_QueuedEvents.Purge();
}
Ejemplo n.º 15
0
void CNotifyList::LevelShutdownPreEntity( void )
{
	gEntList.RemoveListenerEntity( this );
	m_notifyList.Purge();
}
void VMPITracker_End()
{
	g_WorkUnits.Purge();
	Graphical_End();
}
Ejemplo n.º 17
0
void EmitDispLMAlphaAndNeighbors()
{
	int i;

	Msg( "Finding displacement neighbors...\n" );

	// Build the CCoreDispInfos.
	CUtlVector<dface_t*> faces;

	// Create the core dispinfos and init them for use as CDispUtilsHelpers.
	for ( int iDisp = 0; iDisp < nummapdispinfo; ++iDisp )
	{
		CCoreDispInfo *pDisp = new CCoreDispInfo;
		if ( !pDisp )
		{
			g_CoreDispInfos.Purge();
			return;
		}

		int nIndex = g_CoreDispInfos.AddToTail();
		pDisp->SetListIndex( nIndex );
		g_CoreDispInfos[nIndex] = pDisp;
	}

	for ( i=0; i < nummapdispinfo; i++ )
	{
		g_CoreDispInfos[i]->SetDispUtilsHelperInfo( g_CoreDispInfos.Base(), nummapdispinfo );
	}

	faces.SetSize( nummapdispinfo );

	for( i = 0; i < numfaces; i++ )
	{
        dface_t *pFace = &dfaces[i];

		if( pFace->dispinfo == -1 )
			continue;

		mapdispinfo_t *pMapDisp = &mapdispinfo[pFace->dispinfo];
		
		// Set the displacement's face index.
		ddispinfo_t *pDisp = &g_dispinfo[pFace->dispinfo];
		pDisp->m_iMapFace = i;

		// Get a CCoreDispInfo. All we need is the triangles and lightmap texture coordinates.
		CCoreDispInfo *pCoreDispInfo = g_CoreDispInfos[pFace->dispinfo];
		DispMapToCoreDispInfo( pMapDisp, pCoreDispInfo, pFace );
		
		faces[pFace->dispinfo] = pFace;
	}

	
	// Generate and export neighbor data.
	ExportNeighborData( g_CoreDispInfos.Base(), g_dispinfo.Base(), nummapdispinfo );

	// Generate and export the active vert lists.
	ExportAllowedVertLists( g_CoreDispInfos.Base(), g_dispinfo.Base(), nummapdispinfo );

	
	// Now that we know which vertices are actually going to be around, snap the ones that won't
	// be around onto the slightly-reduced mesh. This is so the engine's ray test code and 
	// overlay code works right.
	SnapRemainingVertsToSurface( g_CoreDispInfos.Base(), g_dispinfo.Base(), nummapdispinfo );

	Msg( "Finding lightmap sample positions...\n" );
	for ( i=0; i < nummapdispinfo; i++ )
	{
		dface_t *pFace = faces[i];
		ddispinfo_t *pDisp = &g_dispinfo[pFace->dispinfo];
		CCoreDispInfo *pCoreDispInfo = g_CoreDispInfos[i];

		pDisp->m_iLightmapSamplePositionStart = g_DispLightmapSamplePositions.Count();

		CalculateLightmapSamplePositions( pCoreDispInfo, pFace, g_DispLightmapSamplePositions );
	}

	StartPacifier( "Displacement Alpha : ");

	// Build lightmap alphas.
	int dispCount = 0;	// How many we've processed.
	for( i = 0; i < nummapdispinfo; i++ )
	{
        dface_t *pFace = faces[i];

		Assert( pFace->dispinfo == i );
		mapdispinfo_t *pMapDisp = &mapdispinfo[pFace->dispinfo];
		ddispinfo_t *pDisp = &g_dispinfo[pFace->dispinfo];

		CCoreDispInfo *pCoreDispInfo = g_CoreDispInfos[i];

		// Allocate space for the alpha values.
		pDisp->m_iLightmapAlphaStart = 0; // not used anymore
		
		++dispCount;
	}

	EndPacifier();
}
Ejemplo n.º 18
0
//-----------------------------------------------------------------------------
// Purpose: Get list of files from current path that match pattern
//-----------------------------------------------------------------------------
int CScriptLib::GetFileList( const char* pDirPath, const char* pPattern, CUtlVector< fileList_t > &fileList )
{
	char	sourcePath[MAX_PATH];
	char	fullPath[MAX_PATH];
	bool	bFindDirs;

	fileList.Purge();

	strcpy( sourcePath, pDirPath );
	int len = (int)strlen( sourcePath );
	if ( !len )
	{
		strcpy( sourcePath, ".\\" );
	}
	else if ( sourcePath[len-1] != '\\' )
	{
		sourcePath[len]   = '\\';
		sourcePath[len+1] = '\0';
	}

	strcpy( fullPath, sourcePath );
	if ( pPattern[0] == '\\' && pPattern[1] == '\0' )
	{
		// find directories only
		bFindDirs = true;
		strcat( fullPath, "*" );
	}
	else
	{
		// find files, use provided pattern
		bFindDirs = false;
		strcat( fullPath, pPattern );
	}

	struct _finddata_t findData;
	intptr_t h = _findfirst( fullPath, &findData );
	if ( h == -1 )
	{
		return 0;
	}

	do
	{
		// dos attribute complexities i.e. _A_NORMAL is 0
		if ( bFindDirs )
		{
			// skip non dirs
			if ( !( findData.attrib & _A_SUBDIR ) )
				continue;
		}
		else
		{
			// skip dirs
			if ( findData.attrib & _A_SUBDIR )
				continue;
		}

		if ( !stricmp( findData.name, "." ) )
			continue;

		if ( !stricmp( findData.name, ".." ) )
			continue;

		char fileName[MAX_PATH];
		strcpy( fileName, sourcePath );
		strcat( fileName, findData.name );

		int j = fileList.AddToTail();
		fileList[j].fileName.Set( fileName );
		fileList[j].timeWrite = findData.time_write;
	}
	while ( !_findnext( h, &findData ) );

	_findclose( h );

	return fileList.Count();
}
Ejemplo n.º 19
0
void HandlePacket_LOOKING_FOR_WORKERS( bf_read &buf, const CIPAddr &ipFrom )
{
	// If we're downloading files for a job request, don't process any more "looking for workers" packets.
	if ( g_Waiting_hProcess )
		return;
	
	// This will be a nonzero-length string if patching.
	char versionString[512];
	buf.ReadString( versionString, sizeof( versionString ) );

	int iPort = buf.ReadShort();
	int iPriority = buf.ReadShort();

	// Make sure we don't run the same job more than once.
	if ( !CheckJobID( buf, g_CurJobID ) )
		return;

	CUtlVector<char*> newArgv;
	GetArgsFromBuffer( buf, newArgv, &g_Waiting_bShowAppWindow );

	bool bForcePatch = false;
	if ( buf.GetNumBytesLeft() >= 1 )
		bForcePatch = (buf.ReadByte() != 0);

	int iDownloaderPort = iPort;
	if  ( buf.GetNumBytesLeft() >= 2 )
		iDownloaderPort = buf.ReadShort();

	// Add these arguments after the executable filename to tell the program
	// that it's an MPI worker and who to connect to. 
	char strDownloaderIP[128], strMainIP[128];
	V_snprintf( strDownloaderIP, sizeof( strDownloaderIP ), "%d.%d.%d.%d:%d", ipFrom.ip[0], ipFrom.ip[1], ipFrom.ip[2], ipFrom.ip[3], iDownloaderPort );
	V_snprintf( strMainIP, sizeof( strMainIP ), "%d.%d.%d.%d:%d", ipFrom.ip[0], ipFrom.ip[1], ipFrom.ip[2], ipFrom.ip[3], iPort );

	// (-mpi is already on the command line of whoever ran the app).
	// AppendArg( commandLine, sizeof( commandLine ), "-mpi" );
	newArgv.InsertAfter( 0, CopyString( "-mpi_worker" ) );
	newArgv.InsertAfter( 1, CopyString( strDownloaderIP ) );


	// If the version string is set, then this is a patch.
	bool bPatching = false;
	if ( versionString[0] != 0 )
	{
		bPatching = true;
		
		// Check that we haven't applied this patch version yet. This case usually happens right after we've applied a patch
		// and we're restarting. The vmpi_transfer master is still pinging us telling us to patch, but we don't want to
		// reapply this patch.
		if ( atof( versionString ) <= atof( g_VersionString ) && !bForcePatch )
		{
			newArgv.PurgeAndDeleteElements();
			return;
		}
		
		// Ok, it's a new version. Get rid of whatever was running before.
		KillRunningProcess( "Starting a patch..", true );
	}
								 
	// If there's already a job running, only interrupt it if this new one has a higher priority.
	if ( WaitForProcessToExit() )
	{
		if ( iPriority > g_CurJobPriority )
		{
			KillRunningProcess( "Interrupted by a higher priority process", true );
		}
		else
		{
			// This means we're already running a job with equal to or greater priority than
			// the one that has been requested. We're going to ignore this request.
			newArgv.PurgeAndDeleteElements();
			return;
		}
	}

	// Responses go here.
	g_CurRespondAddr = ipFrom;
	
	// Also look for -mpi_ShowAppWindow in the args to the service.
	if ( !g_Waiting_bShowAppWindow && FindArg( __argc, __argv, "-mpi_ShowAppWindow" ) )
		g_Waiting_bShowAppWindow = true;

	// Copy all the files from the master and put them in our cache dir to run with.
	char cacheDir[MAX_PATH];
	if ( StartDownloadingAppFiles( newArgv, cacheDir, sizeof( cacheDir ), g_Waiting_bShowAppWindow, &g_Waiting_hProcess, bPatching ) )
	{
		// After it's downloaded, we want it to switch to the main connection port.
		if ( newArgv.Count() >= 3 && V_stricmp( newArgv[2], strDownloaderIP ) == 0 )
		{
			delete newArgv[2];
			newArgv[2] = CopyString( strMainIP );
		}
		
		g_Waiting_StartTime = Plat_FloatTime();
		g_Waiting_Argv.PurgeAndDeleteElements();
		g_Waiting_Argv = newArgv;
		g_Waiting_Priority = iPriority;
		g_Waiting_bPatching = bPatching;
		newArgv.Purge();
	}
	else
	{
		newArgv.PurgeAndDeleteElements();
	}

	// Remember that we tried to run this job so we don't try to run it again.
	AddJobMemory( g_CurJobID );
	
	SendStateToServicesBrowsers();
}
//-----------------------------------------------------------------------------
// Purpose: 
// Input  : *pTask - 
//-----------------------------------------------------------------------------
void CNPC_CraneDriver::StartTask( const Task_t *pTask )
{
	switch( pTask->iTask )
	{
	case TASK_WAIT_FOR_MOVEMENT:
		break;

	case TASK_CRANE_GET_POSITION_OVER_ENEMY:
		{
			if ( !GetEnemy() )
			{
				TaskFail(FAIL_NO_ROUTE);
				return;
			}

			SetDesiredPosition( GetEnemy()->GetAbsOrigin() );
			TaskComplete();
		}
		break;

	case TASK_CRANE_GET_POSITION_OVER_OBJECT:
		{
			if ( !m_hPickupTarget )
			{
				TaskFail("No object to pickup!");
				return;
			}

			SetDesiredPosition( m_hPickupTarget->GetAbsOrigin() );
			TaskComplete();
		}
		break;

	case TASK_CRANE_GET_POSITION_OVER_LASTPOSITION:
		{
			SetDesiredPosition( m_vecLastPosition );
			TaskComplete();
		}
		break;

	case TASK_CRANE_TURN_MAGNET_OFF:
		{
			// If we picked up something, and we were being forced to pick something up, fire our output
			if ( m_hCrane->GetTotalMassOnCrane() > 0 && m_bForcedDropoff )
			{
				// Are we supposed to pause first?
				if ( m_flReleasePause )
				{
					m_flReleaseAt = gpGlobals->curtime + m_flReleasePause;
					m_OnPausingBeforeDrop.FireOutput( this, this );
					return;
				}

				m_OnDroppedObject.FireOutput( this, this );
			}

			m_hCrane->TurnMagnetOff();
			TaskComplete();
		}
		break;

	case TASK_END_FORCED_DROP:
		{
			m_bForcedDropoff = false;
			TaskComplete();
		}
		break;

	case TASK_CRANE_FIND_OBJECT_TO_PICKUP:
		{
			Vector2D vecOrigin2D( m_hCrane->GetAbsOrigin().x, m_hCrane->GetAbsOrigin().y );

			// Find a large physics object within our reach to pickup
			float flLargestMass = 0;
			CBaseEntity *pLargestEntity = NULL;
			
			CBaseEntity *pList[1024];
			Vector delta( m_flDistTooFar, m_flDistTooFar, m_flDistTooFar*2 );
			int count = UTIL_EntitiesInBox( pList, 1024, m_hCrane->GetAbsOrigin() - delta, m_hCrane->GetAbsOrigin() + delta, 0 );
			for ( int i = 0; i < count; i++ )
			{
				if ( !pList[i] ) 
					continue;
				// Ignore the crane & the magnet
				if ( pList[i] == m_hCrane || pList[i] == m_hCrane->GetMagnet() )
					continue;
				if ( m_PreviouslyPickedUpObjects.Find( pList[i] ) != m_PreviouslyPickedUpObjects.InvalidIndex() )
					continue;

				// Get the VPhysics object
				IPhysicsObject *pPhysics = pList[i]->VPhysicsGetObject();
				if ( pPhysics && pList[i]->GetMoveType() == MOVETYPE_VPHYSICS )
				{
					float flMass = pPhysics->GetMass();
					if ( flMass > flLargestMass && (flMass < MAXIMUM_CRANE_PICKUP_MASS) && (flMass > MINIMUM_CRANE_PICKUP_MASS) )
					{
						// Biggest one we've found so far

						// Now make sure it's within our reach
						// Do our distance check in 2D
						Vector2D vecOrigin2D( m_hCrane->GetAbsOrigin().x, m_hCrane->GetAbsOrigin().y );
						Vector2D vecEnemy2D( pList[i]->GetAbsOrigin().x, pList[i]->GetAbsOrigin().y );
						float flDist = (vecOrigin2D - vecEnemy2D).Length();
						// Maximum & Minimum size of the crane's reach
						if ( flDist > MAX_CRANE_FLAT_REACH )
							continue;
						if ( flDist < MIN_CRANE_FLAT_REACH )
							continue;

						flLargestMass = flMass;
						pLargestEntity = pList[i];
					}
				}
			}

			// If we didn't find anything new, clear our list of targets
			if ( !pLargestEntity )
			{
				m_PreviouslyPickedUpObjects.Purge();
			}

			if ( !pLargestEntity )
			{
				TaskFail("Couldn't find anything to pick up!");
				return;
			}

			m_hPickupTarget = pLargestEntity;
			TaskComplete();
		}
		break;

	case TASK_CRANE_DROP_MAGNET:
		{
			// Drop the magnet, but only end the task once the magnet's back up
			m_pVehicleInterface->NPC_SecondaryFire();

			// Don't check to see if drop's finished until this time is up.
			// This is necessary because the crane won't start dropping this
			// frame, and our cranedriver will think it's finished immediately.
			m_flDropWait = gpGlobals->curtime + 0.5;
		}
		break;

	default:
		BaseClass::StartTask( pTask );
		break;
	}
}
//-----------------------------------------------------------------------------
// Purpose: A CPointTemplate has asked us to reconnect all the entity I/O links
//			inside it's templates. Go through the keys and add look for values
//			that match a name within the group's entity	names. Append %d to any
//			found values, which will later be filled out by a unique identifier
//			whenever the template is instanced.
//-----------------------------------------------------------------------------
void Templates_ReconnectIOForGroup( CPointTemplate *pGroup )
{
	int iCount = pGroup->GetNumTemplates();
	if ( !iCount )
		return;

	// First assemble a list of the targetnames of all the templates in the group.
	// We need to store off the original names here, because we're going to change
	// them as we go along.
	CUtlVector< grouptemplate_t > GroupTemplates;
	int i;
	for ( i = 0; i < iCount; i++ )
	{
		grouptemplate_t newGroupTemplate;
		newGroupTemplate.iIndex = pGroup->GetTemplateIndexForTemplate(i);
		newGroupTemplate.pMapDataParser = new CEntityMapData( g_Templates[ newGroupTemplate.iIndex ]->pszMapData, g_Templates[ newGroupTemplate.iIndex ]->iMapDataLength );
		Assert( newGroupTemplate.pMapDataParser );
		newGroupTemplate.pMapDataParser->ExtractValue( "targetname", newGroupTemplate.pszName );
		newGroupTemplate.bChangeTargetname = false;

		GroupTemplates.AddToTail( newGroupTemplate );
	}

	if (pGroup->AllowNameFixup())
	{
		char keyName[MAPKEY_MAXLENGTH];
		char value[MAPKEY_MAXLENGTH];
		char valueclipped[MAPKEY_MAXLENGTH];
		
		// Now go through all the entities in the group and parse their mapdata keyvalues.
		// We're looking for any values that match targetnames of any of the group entities.
		for ( i = 0; i < iCount; i++ )
		{
			// We need to know what instance of each key we're changing.
			// Store a table of the count of the keys we've run into.
			CUtlDict< int, int > KeyInstanceCount;
			CEntityMapData *mapData = GroupTemplates[i].pMapDataParser;

			// Loop through our keys
			if ( !mapData->GetFirstKey(keyName, value) )
				continue;

			do 
			{
				// Ignore targetnames
				if ( !stricmp( keyName, "targetname" ) )
					continue;

				// Add to the count for this 
				int idx = KeyInstanceCount.Find( keyName );
				if ( idx == KeyInstanceCount.InvalidIndex() )
				{
					idx = KeyInstanceCount.Insert( keyName, 0 );
				}
				KeyInstanceCount[idx]++;

				// Entity I/O values are stored as "Targetname,<data>", so we need to see if there's a ',' in the string
				char *sValue = value;
				// FIXME: This is very brittle. Any key with a , will not be found.
				char *s = strchr( value, ',' );
				if ( s )
				{
					// Grab just the targetname of the receiver
					Q_strncpy( valueclipped, value, (s - value+1) );
					sValue = valueclipped;
				}

				// Loop through our group templates
				for ( int iTName = 0; iTName < iCount; iTName++ )
				{
					char *pName = GroupTemplates[iTName].pszName;
					if ( stricmp( pName, sValue ) )
						continue;

					if ( template_debug.GetInt() )
					{
						Msg("Template Connection Found: Key %s (\"%s\") in entity named \"%s\"(%d) matches entity %d's targetname\n", keyName, sValue, GroupTemplates[i].pszName, i, iTName );
					}

					char newvalue[MAPKEY_MAXLENGTH];

					// Get the current key instance. (-1 because it's this one we're changing)
					int nKeyInstance = KeyInstanceCount[idx] - 1;

					// Add our IO value to the targetname
					// We need to append it if this isn't an Entity I/O value, or prepend it to the ',' if it is
					if ( s )
					{
						Q_strncpy( newvalue, valueclipped, MAPKEY_MAXLENGTH );
						Q_strncat( newvalue, ENTITYIO_FIXUP_STRING, sizeof(newvalue), COPY_ALL_CHARACTERS );
						Q_strncat( newvalue, s, sizeof(newvalue), COPY_ALL_CHARACTERS );
						mapData->SetValue( keyName, newvalue, nKeyInstance );
					}
					else
					{
						Q_strncpy( newvalue, sValue, MAPKEY_MAXLENGTH );
						Q_strncat( newvalue, ENTITYIO_FIXUP_STRING, sizeof(newvalue), COPY_ALL_CHARACTERS );
						mapData->SetValue( keyName, newvalue, nKeyInstance );
					}
					
					// Remember we changed this targetname
					GroupTemplates[iTName].bChangeTargetname = true;

					// Set both entity's flags telling them their template needs fixup when it's spawned
					g_Templates[ GroupTemplates[i].iIndex ]->bNeedsEntityIOFixup = true;
					g_Templates[ GroupTemplates[iTName].iIndex ]->bNeedsEntityIOFixup = true;
				}
			} 
			while ( mapData->GetNextKey(keyName, value) );
		}

		// Now change targetnames for all entities that need them changed
		for ( i = 0; i < iCount; i++ )
		{
			char value[MAPKEY_MAXLENGTH];

			if ( GroupTemplates[i].bChangeTargetname )
			{
				CEntityMapData *mapData = GroupTemplates[i].pMapDataParser;
				mapData->ExtractValue( "targetname", value );
				Q_strncat( value, ENTITYIO_FIXUP_STRING, sizeof(value), COPY_ALL_CHARACTERS );
				mapData->SetValue( "targetname", value );
			}
		}
	}

	// Delete our group parsers
	for ( i = 0; i < iCount; i++ )
	{
		delete GroupTemplates[i].pMapDataParser;
	}
	GroupTemplates.Purge();
}
Ejemplo n.º 22
0
int CMySQLQuery::Execute( IMySQL *pDB )
{
	int ret = pDB->Execute( m_QueryText.Base() );
	m_QueryText.Purge();
	return ret;
}
Ejemplo n.º 23
0
//-----------------------------------------------------------------------------
// Purpose:
//-----------------------------------------------------------------------------
void EndGroupingSounds()
{
	g_aGroupedSounds.Purge();
	SetImpactSoundRoute( NULL );
}
Ejemplo n.º 24
0
void FoundryHelpers_ClearEntityHighlightEffects()
{
	g_EntityHighlightEffects.Purge();
}
Ejemplo n.º 25
0
//-----------------------------------------------------------------------------
// Trace rays from each unique vertex, accumulating direct and indirect
// sources at each ray termination. Use the winding data to distribute the unique vertexes
// into the rendering layout.
//-----------------------------------------------------------------------------
void CVradStaticPropMgr::ComputeLighting( CStaticProp &prop, int iThread, int prop_index )
{
	Vector						samplePosition;
	Vector						sampleNormal;
	CUtlVector<colorVertex_t>	colorVerts; 
	CUtlVector<badVertex_t>		badVerts;

	StaticPropDict_t &dict = m_StaticPropDict[prop.m_ModelIdx];
	studiohdr_t	*pStudioHdr = dict.m_pStudioHdr;
	OptimizedModel::FileHeader_t *pVtxHdr = (OptimizedModel::FileHeader_t *)dict.m_VtxBuf.Base();
	if ( !pStudioHdr || !pVtxHdr )
	{
		// must have model and its verts for lighting computation
		// game will fallback to fullbright
		return;
	}

	// for access to this model's vertexes
	SetCurrentModel( pStudioHdr );

	for ( int bodyID = 0; bodyID < pStudioHdr->numbodyparts; ++bodyID )
	{
		OptimizedModel::BodyPartHeader_t* pVtxBodyPart = pVtxHdr->pBodyPart( bodyID );
		mstudiobodyparts_t *pBodyPart = pStudioHdr->pBodypart( bodyID );

		for ( int modelID = 0; modelID < pBodyPart->nummodels; ++modelID )
		{
			OptimizedModel::ModelHeader_t* pVtxModel = pVtxBodyPart->pModel( modelID );
			mstudiomodel_t *pStudioModel = pBodyPart->pModel( modelID );

			// light all unique vertexes
			colorVerts.EnsureCount( pStudioModel->numvertices );
			memset( colorVerts.Base(), 0, colorVerts.Count() * sizeof(colorVertex_t) );

			int numVertexes = 0;
			for ( int meshID = 0; meshID < pStudioModel->nummeshes; ++meshID )
			{
				mstudiomesh_t *pStudioMesh = pStudioModel->pMesh( meshID );
				const mstudio_meshvertexdata_t *vertData = pStudioMesh->GetVertexData();
				for ( int vertexID = 0; vertexID < pStudioMesh->numvertices; ++vertexID )
				{
					// transform position and normal into world coordinate system
					matrix3x4_t	matrix;
					AngleMatrix( prop.m_Angles, prop.m_Origin, matrix );
					VectorTransform( *vertData->Position( vertexID ), matrix, samplePosition );
					AngleMatrix( prop.m_Angles, matrix );
					VectorTransform( *vertData->Normal( vertexID ), matrix, sampleNormal );

					if ( (! (prop.m_Flags & STATIC_PROP_NO_PER_VERTEX_LIGHTING ) ) &&
						 PositionInSolid( samplePosition ) )
					{
						// vertex is in solid, add to the bad list, and recover later
						badVertex_t badVertex;
						badVertex.m_ColorVertex = numVertexes;
						badVertex.m_Position = samplePosition;
						badVertex.m_Normal = sampleNormal;
						badVerts.AddToTail( badVertex );			
					}
					else
					{
						Vector direct_pos=samplePosition;
						int skip_prop=-1;

						Vector directColor(0,0,0);
						if (prop.m_Flags & STATIC_PROP_NO_PER_VERTEX_LIGHTING )
						{
							if (prop.m_bLightingOriginValid)
								VectorCopy( prop.m_LightingOrigin, direct_pos );
							else
								VectorCopy( prop.m_Origin, direct_pos );
							skip_prop = prop_index;
						}
						if ( prop.m_Flags & STATIC_PROP_NO_SELF_SHADOWING )
							skip_prop = prop_index;

						
						ComputeDirectLightingAtPoint( direct_pos,
													  sampleNormal, directColor, iThread,
													  skip_prop );
						Vector indirectColor(0,0,0);

						if (g_bShowStaticPropNormals)
						{
							directColor= sampleNormal;
							directColor += Vector(1.0,1.0,1.0);
							directColor *= 50.0;
						}
						else
							if (numbounce >= 1)
								ComputeIndirectLightingAtPoint( samplePosition, sampleNormal, 
																indirectColor, iThread, true );

						colorVerts[numVertexes].m_bValid = true;
						colorVerts[numVertexes].m_Position = samplePosition;
						VectorAdd( directColor, indirectColor, colorVerts[numVertexes].m_Color );
					}

					numVertexes++;
				}
			}

			// color in the bad vertexes
			// when entire model has no lighting origin and no valid neighbors
			// must punt, leave black coloring
			if ( badVerts.Count() && ( prop.m_bLightingOriginValid || badVerts.Count() != numVertexes ) )
			{
				for ( int nBadVertex = 0; nBadVertex < badVerts.Count(); nBadVertex++ )
				{		
					Vector bestPosition;
					if ( prop.m_bLightingOriginValid )
					{
						// use the specified lighting origin
						VectorCopy( prop.m_LightingOrigin, bestPosition );
					}
					else
					{
						// find the closest valid neighbor
						int best = 0;
						float closest = FLT_MAX;
						for ( int nColorVertex = 0; nColorVertex < numVertexes; nColorVertex++ )
						{
							if ( !colorVerts[nColorVertex].m_bValid )
							{
								// skip invalid neighbors
								continue;
							}
							Vector delta;
							VectorSubtract( colorVerts[nColorVertex].m_Position, badVerts[nBadVertex].m_Position, delta );
							float distance = VectorLength( delta );
							if ( distance < closest )
							{
								closest = distance;
								best    = nColorVertex;
							}
						}

						// use the best neighbor as the direction to crawl
						VectorCopy( colorVerts[best].m_Position, bestPosition );
					}

					// crawl toward best position
					// sudivide to determine a closer valid point to the bad vertex, and re-light
					Vector midPosition;
					int numIterations = 20;
					while ( --numIterations > 0 )
					{
						VectorAdd( bestPosition, badVerts[nBadVertex].m_Position, midPosition );
						VectorScale( midPosition, 0.5f, midPosition );
						if ( PositionInSolid( midPosition ) )
							break;
						bestPosition = midPosition;
					}

					// re-light from better position
					Vector directColor;
					ComputeDirectLightingAtPoint( bestPosition, badVerts[nBadVertex].m_Normal, directColor, iThread );

					Vector indirectColor;
					ComputeIndirectLightingAtPoint( bestPosition, badVerts[nBadVertex].m_Normal,
													indirectColor, iThread, true );

					// save results, not changing valid status
					// to ensure this offset position is not considered as a viable candidate
					colorVerts[badVerts[nBadVertex].m_ColorVertex].m_Position = bestPosition;
					VectorAdd( directColor, indirectColor, colorVerts[badVerts[nBadVertex].m_ColorVertex].m_Color );
				}
			}
			
			// discard bad verts
			badVerts.Purge();

			// distribute the lighting results
			for ( int nLod = 0; nLod < pVtxHdr->numLODs; nLod++ )
			{
				OptimizedModel::ModelLODHeader_t *pVtxLOD = pVtxModel->pLOD( nLod );

				for ( int nMesh = 0; nMesh < pStudioModel->nummeshes; ++nMesh )
				{
					mstudiomesh_t* pMesh = pStudioModel->pMesh( nMesh );
					OptimizedModel::MeshHeader_t* pVtxMesh = pVtxLOD->pMesh( nMesh );

					for ( int nGroup = 0; nGroup < pVtxMesh->numStripGroups; ++nGroup )
					{
						OptimizedModel::StripGroupHeader_t* pStripGroup = pVtxMesh->pStripGroup( nGroup );
						int nMeshIdx = prop.m_MeshData.AddToTail();
						prop.m_MeshData[nMeshIdx].m_Verts.AddMultipleToTail( pStripGroup->numVerts );
						prop.m_MeshData[nMeshIdx].m_nLod = nLod;

						for ( int nVertex = 0; nVertex < pStripGroup->numVerts; ++nVertex )
						{
							int nIndex = pMesh->vertexoffset + pStripGroup->pVertex( nVertex )->origMeshVertID;

							Assert( nIndex < pStudioModel->numvertices );
							prop.m_MeshData[nMeshIdx].m_Verts[nVertex] = colorVerts[nIndex].m_Color;
						}
					}
				}
			}
		}
	}
}
Ejemplo n.º 26
0
void CConfigFile::Term()
{	
	m_Entries.Purge();
	m_SSDatabase[0] = m_SSResourcePath[0] = m_SSBSPPath[0] = 0;	
}
void CHLSL_Image::CreateScreenshot( CNodeView *n, const char *filepath )
{
	Vector4D graphBounds;
	n->GetGraphBoundaries( graphBounds );

	int vsize_x, vsize_y;
	n->GetSize( vsize_x, vsize_y );
	const float zoomFactor = 1.0f / clamp( sedit_screenshot_zoom.GetFloat(), 0.01f, 100.0f );

	float nodespace_width = graphBounds.z - graphBounds.x;
	float nodespace_height = graphBounds.w - graphBounds.y;
	float nodespace_width_pershot = vsize_x * zoomFactor;
	float nodespace_height_pershot = vsize_y * zoomFactor;

	int numshots_x = ceil( nodespace_width / nodespace_width_pershot );
	int numshots_y = ceil( nodespace_height / nodespace_height_pershot );

	Vector2D extraSpace;
	extraSpace.x = (nodespace_width_pershot*numshots_x) - nodespace_width;
	extraSpace.y = (nodespace_height_pershot*numshots_y) - nodespace_height;
	extraSpace *= 0.5f;

	n->vecScreenshotBounds.Init( graphBounds.x - extraSpace.x,
								graphBounds.y - extraSpace.y,
								graphBounds.z + extraSpace.x,
								graphBounds.w + extraSpace.y );

	int tgapixels_x = numshots_x * vsize_x - numshots_x;
	int tgapixels_y = numshots_y * vsize_y - numshots_y;

	unsigned int targetSize = tgapixels_x * 3 * tgapixels_y;
	unsigned char *pTGA = ( unsigned char * )malloc( targetSize );
	if ( !pTGA )
	{
		Warning( "Not enough memory available (failed to malloc %u bytes).\n", targetSize );
	}

	Vector2D pos_old = n->AccessViewPos();
	float zoom_old = n->AccessViewZoom();
	n->bRenderingScreenShot = true;

	n->AccessViewZoom() = zoomFactor;

	int vp_x, vp_y;
	vp_x = vp_y = 0;
	n->LocalToScreen( vp_x, vp_y );
	int screen_sx, screen_sy;
	engine->GetScreenSize( screen_sx, screen_sy );

	vp_x++;
	vp_y++;
	vsize_x--;
	vsize_y--;

	n->AccessViewPos().Init();

	CViewSetup view2D;
	view2D.x = 0;
	view2D.y = 0;
	view2D.width = screen_sx;
	view2D.height = screen_sy;
	view2D.m_bRenderToSubrectOfLargerScreen = false;
	Frustum _fplanes;

	CMatRenderContextPtr pRenderContext( materials );

#ifdef SHADER_EDITOR_DLL_2006
	render->Push2DView( view2D, 0, false, NULL, _fplanes );
#else
	render->Push2DView( view2D, 0, NULL, _fplanes );
#endif
	pRenderContext->PushRenderTargetAndViewport( NULL, view2D.x, view2D.y, view2D.width, view2D.height );

//	bool bSuccess = TGAWriter::WriteDummyFileNoAlloc( filepath, tgapixels_x, tgapixels_y, IMAGE_FORMAT_RGBA8888 );
//	Assert( bSuccess );

	if ( pTGA )
	{
		for ( int sX = 0; sX < numshots_x; sX ++ )
		{
			for ( int sY = 0; sY < numshots_y; sY ++ )
			{
				Vector2D basepos( graphBounds.x + nodespace_width_pershot * 0.5f, graphBounds.w - nodespace_height_pershot * 0.5f );
				basepos.x += sX * nodespace_width_pershot;
				basepos.y -= sY * nodespace_height_pershot;
				basepos.x *= -1.0f;
				basepos += extraSpace;
				n->AccessViewPos() = basepos;

				pRenderContext->ClearColor4ub( 0, 0, 0, 0 );
				pRenderContext->ClearBuffers( true, true );
				vgui::ipanel()->PaintTraverse( n->GetVPanel(), true );

				unsigned int sizeimg = vsize_x * 3 * vsize_y;
				unsigned char *pImage = ( unsigned char * )malloc( sizeimg );
				if ( pImage )
				{
					pRenderContext->ReadPixels( vp_x, vp_y, vsize_x, vsize_y, pImage, IMAGE_FORMAT_RGB888 );

					for ( int pX = 0; pX < vsize_x; pX ++ )
					{
						for ( int pY = 0; pY < vsize_y; pY ++ )
						{
							int targetpixel = (sX * vsize_x + pX) * 3 +
								( sY * vsize_y + pY ) * tgapixels_x * 3;
							int srcpixel = pX * 3 + pY * vsize_x * 3;

							Q_memcpy( &pTGA[targetpixel], &pImage[srcpixel], 3 );
						}
					}
#if 0
#if DEBUG
					bool bSuccess =
#endif
					TGAWriter::WriteRectNoAlloc( pImage, filepath, sX * vsize_x, sY * vsize_y, vsize_x, vsize_y, 0, IMAGE_FORMAT_RGB888 );
#if DEBUG
					Assert( bSuccess );
#endif
#endif

					free( pImage );
				}
				else
					Warning( "Tiling error (failed to malloc %u bytes).\n", sizeimg );

			}
		}
	}


	if ( pTGA )
	{
		//unsigned int iMaxTGASize = 1024 + (tgapixels_x * tgapixels_y * 3);
		//void *pTGA_BUFFER = malloc( iMaxTGASize );
		//if ( pTGA_BUFFER )
		//{
		//	CUtlBuffer buffer( pTGA_BUFFER, iMaxTGASize );

		//	TGAWriter::WriteToBuffer( pTGA, buffer, tgapixels_x, tgapixels_y, IMAGE_FORMAT_RGB888, IMAGE_FORMAT_RGB888 );
		//	filesystem->AsyncWrite( filepath, buffer.Base(), buffer.TellPut(), true );
		//}
		//else
		//{
		//	Warning( "Not enough memory available (failed to malloc %u bytes).\n", iMaxTGASize );
		//}

		jpeg_compress_struct jInfo;
		ValveJpegErrorHandler_t jErr;
		jpeg_destination_mgr jDest;

		jInfo.err = jpeg_std_error( &jErr.m_Base );
		jInfo.err->error_exit = &ValveJpegErrorHandler;

		jpeg_create_compress( &jInfo );

		jInfo.dest = &jDest;
		jInfo.dest->init_destination = &jInit_destination;
		jInfo.dest->empty_output_buffer = &jEmpty_output_buffer;
		jInfo.dest->term_destination = &jTerm_destination;

		jInfo.image_width = tgapixels_x;
		jInfo.image_height = tgapixels_y;
		jInfo.input_components = 3;
		jInfo.in_color_space = JCS_RGB;
		jpeg_set_defaults( &jInfo );
		jpeg_set_quality( &jInfo, clamp( sedit_screenshot_quali.GetInt(), 1, 100 ), FALSE );

		jpeg_start_compress(&jInfo, TRUE);

		JSAMPROW row_pointer[1];
		int row_stride;
		row_stride = jInfo.image_width * 3;
		while (jInfo.next_scanline < jInfo.image_height)
		{
			row_pointer[0] = &pTGA[jInfo.next_scanline * row_stride];
			jpeg_write_scanlines(&jInfo, row_pointer, 1);
		}

		jpeg_finish_compress(&jInfo);

		jpeg_destroy_compress(&jInfo);

		void *pBUFFER = malloc( jOut.Count() );
		Q_memcpy( pBUFFER, jOut.Base(), jOut.Count() );
		filesystem->AsyncWrite( filepath, pBUFFER, jOut.Count(), true );

		jOut.Purge();
		free( pTGA );
	}

	pRenderContext->PopRenderTargetAndViewport();
	render->PopView( _fplanes );

	n->bRenderingScreenShot = false;
	n->AccessViewPos() = pos_old;
	n->AccessViewZoom() = zoom_old;
}
//-----------------------------------------------------------------------------
// Purpose: 
//-----------------------------------------------------------------------------
void CDarknessLightSourcesSystem::LevelInitPreEntity()
{
	m_LightSources.Purge();
}
Ejemplo n.º 29
0
//-----------------------------------------------------------------------------
// A Scene image file contains all the compiled .XCD
//-----------------------------------------------------------------------------
bool CSceneImage::CreateSceneImageFile( CUtlBuffer &targetBuffer, char const *pchModPath, bool bLittleEndian, bool bQuiet, ISceneCompileStatus *pStatus )
{
	CUtlVector<fileList_t>	vcdFileList;
	CUtlSymbolTable			vcdSymbolTable( 0, 32, true );

	Msg( "\n" );

	// get all the VCD files according to the seacrh paths
	char searchPaths[512];
	g_pFullFileSystem->GetSearchPath( "GAME", false, searchPaths, sizeof( searchPaths ) );
	char *pPath = strtok( searchPaths, ";" );
	while ( pPath )
	{
		int currentCount = vcdFileList.Count();

		char szPath[MAX_PATH];
		V_ComposeFileName( pPath, "scenes/*.vcd", szPath, sizeof( szPath ) );

		scriptlib->FindFiles( szPath, true, vcdFileList );

		Msg( "Scenes: Searching '%s' - Found %d scenes.\n", szPath, vcdFileList.Count() - currentCount );

		pPath = strtok( NULL, ";" );
	}

	if ( !vcdFileList.Count() )
	{
		Msg( "Scenes: No Scene Files found!\n" );
		return false;
	}

	// iterate and convert all the VCD files
	bool bGameIsTF = V_stristr( pchModPath, "\\tf" ) != NULL;
	for ( int i=0; i<vcdFileList.Count(); i++ )
	{
		const char *pFilename = vcdFileList[i].fileName.String();
		const char *pSceneName = V_stristr( pFilename, "scenes\\" );
		if ( !pSceneName )
		{
			continue;
		}

		if ( !bLittleEndian && bGameIsTF && V_stristr( pSceneName, "high\\" ) )
		{
			continue;
		}

		// process files in order they would be found in search paths
		// i.e. skipping later processed files that match an earlier conversion
		UtlSymId_t symbol = vcdSymbolTable.Find( pSceneName );
		if ( symbol == UTL_INVAL_SYMBOL )
		{
			vcdSymbolTable.AddString( pSceneName );

			pStatus->UpdateStatus( pFilename, bQuiet, i, vcdFileList.Count() );

			if ( !CreateTargetFile_VCD( pFilename, "", false, bLittleEndian ) )
			{
				Error( "CreateSceneImageFile: Failed on '%s' conversion!\n", pFilename );
			}


		}
	}

	if ( !g_SceneFiles.Count() )
	{
		// nothing to do
		return true;
	}

	Msg( "Scenes: Finalizing %d unique scenes.\n", g_SceneFiles.Count() );


	// get the string pool
	CUtlVector< unsigned int > stringOffsets;
	CUtlBuffer stringPool;
	g_ChoreoStringPool.GetTableAndPool( stringOffsets, stringPool );

	if ( !bQuiet )
	{
		Msg( "Scenes: String Table: %d bytes\n", stringOffsets.Count() * sizeof( int ) );
		Msg( "Scenes: String Pool: %d bytes\n", stringPool.TellMaxPut() );
	}

	// first header, then lookup table, then string pool blob
	int stringPoolStart = sizeof( SceneImageHeader_t ) + stringOffsets.Count() * sizeof( int );
	// then directory
	int sceneEntryStart = stringPoolStart + stringPool.TellMaxPut();
	// then variable sized summaries
	int sceneSummaryStart = sceneEntryStart + g_SceneFiles.Count() * sizeof( SceneImageEntry_t );
	// then variable sized compiled binary scene data
	int sceneDataStart = 0;

	// construct header
	SceneImageHeader_t imageHeader = { 0 };
	imageHeader.nId = SCENE_IMAGE_ID;
	imageHeader.nVersion = SCENE_IMAGE_VERSION;
	imageHeader.nNumScenes = g_SceneFiles.Count();
	imageHeader.nNumStrings = stringOffsets.Count();
	imageHeader.nSceneEntryOffset = sceneEntryStart;
	if ( !bLittleEndian )
	{
		imageHeader.nId = BigLong( imageHeader.nId );
		imageHeader.nVersion = BigLong( imageHeader.nVersion );
		imageHeader.nNumScenes = BigLong( imageHeader.nNumScenes );
		imageHeader.nNumStrings = BigLong( imageHeader.nNumStrings );
		imageHeader.nSceneEntryOffset = BigLong( imageHeader.nSceneEntryOffset );
	}
	targetBuffer.Put( &imageHeader, sizeof( imageHeader ) );

	// header is immediately followed by string table and pool
	for ( int i = 0; i < stringOffsets.Count(); i++ )
	{
		unsigned int offset = stringPoolStart + stringOffsets[i];
		if ( !bLittleEndian )
		{
			offset = BigLong( offset );
		}
		targetBuffer.PutInt( offset );
	}
	Assert( stringPoolStart == targetBuffer.TellMaxPut() );
	targetBuffer.Put( stringPool.Base(), stringPool.TellMaxPut() );

	// construct directory
	CUtlSortVector< SceneImageEntry_t, CSceneImageEntryLessFunc > imageDirectory;
	imageDirectory.EnsureCapacity( g_SceneFiles.Count() );

	// build directory
	// directory is linear sorted by filename checksum for later binary search
	for ( int i = 0; i < g_SceneFiles.Count(); i++ )
	{
		SceneImageEntry_t imageEntry = { 0 };

		// name needs to be normalized for determinstic later CRC name calc
		// calc crc based on scenes\anydir\anyscene.vcd
		char szCleanName[MAX_PATH];
		V_strncpy( szCleanName, g_SceneFiles[i].fileName.String(), sizeof( szCleanName ) );
		V_strlower( szCleanName );
		V_FixSlashes( szCleanName );
		char *pName = V_stristr( szCleanName, "scenes\\" );
		if ( !pName )
		{
			// must have scenes\ in filename
			Error( "CreateSceneImageFile: Unexpected lack of scenes prefix on %s\n", g_SceneFiles[i].fileName.String() );
		}

		CRC32_t crcFilename = CRC32_ProcessSingleBuffer( pName, strlen( pName ) );
		imageEntry.crcFilename = crcFilename;

		// temp store an index to its file, fixup later, necessary to access post sort
		imageEntry.nDataOffset = i;
		if ( imageDirectory.Find( imageEntry ) != imageDirectory.InvalidIndex() )
		{
			// filename checksums must be unique or runtime binary search would be bogus
			Error( "CreateSceneImageFile: Unexpected filename checksum collision!\n" );
		}		

		imageDirectory.Insert( imageEntry );
	}

	// determine sort order and start of data after dynamic summaries
	CUtlVector< int > writeOrder;
	writeOrder.EnsureCapacity( g_SceneFiles.Count() );
	sceneDataStart = sceneSummaryStart;
	for ( int i = 0; i < imageDirectory.Count(); i++ )
	{
		// reclaim offset, indicates write order of scene file
		int iScene = imageDirectory[i].nDataOffset;
		writeOrder.AddToTail( iScene );

		// march past each variable sized summary to determine start of scene data
		int numSounds = g_SceneFiles[iScene].soundList.Count();
		sceneDataStart += sizeof( SceneImageSummary_t ) + ( numSounds - 1 ) * sizeof( int );
	}

	// finalize and write directory
	Assert( sceneEntryStart == targetBuffer.TellMaxPut() );
	int nSummaryOffset = sceneSummaryStart;
	int nDataOffset = sceneDataStart;
	for ( int i = 0; i < imageDirectory.Count(); i++ )
	{
		int iScene = writeOrder[i];

		imageDirectory[i].nDataOffset = nDataOffset;
		imageDirectory[i].nDataLength = g_SceneFiles[iScene].compiledBuffer.TellMaxPut();
		imageDirectory[i].nSceneSummaryOffset = nSummaryOffset;
		if ( !bLittleEndian )
		{
			imageDirectory[i].crcFilename = BigLong( imageDirectory[i].crcFilename );
			imageDirectory[i].nDataOffset = BigLong( imageDirectory[i].nDataOffset );
			imageDirectory[i].nDataLength = BigLong( imageDirectory[i].nDataLength );
			imageDirectory[i].nSceneSummaryOffset = BigLong( imageDirectory[i].nSceneSummaryOffset );
		}
		targetBuffer.Put( &imageDirectory[i], sizeof( SceneImageEntry_t ) );

		int numSounds = g_SceneFiles[iScene].soundList.Count();
		nSummaryOffset += sizeof( SceneImageSummary_t ) + (numSounds - 1) * sizeof( int );

		nDataOffset += g_SceneFiles[iScene].compiledBuffer.TellMaxPut();
	}

	// finalize and write summaries
	Assert( sceneSummaryStart == targetBuffer.TellMaxPut() );
	for ( int i = 0; i < imageDirectory.Count(); i++ )
	{
		int iScene = writeOrder[i];
		int msecs = g_SceneFiles[iScene].msecs;
		int soundCount = g_SceneFiles[iScene].soundList.Count();
		if ( !bLittleEndian )
		{
			msecs = BigLong( msecs );
			soundCount = BigLong( soundCount );
		}
		targetBuffer.PutInt( msecs );
		targetBuffer.PutInt( soundCount );
		for ( int j = 0; j < g_SceneFiles[iScene].soundList.Count(); j++ )
		{
			int soundId = g_SceneFiles[iScene].soundList[j];
			if ( !bLittleEndian )
			{
				soundId = BigLong( soundId );
			}
			targetBuffer.PutInt( soundId );
		}
	}

	// finalize and write data
	Assert( sceneDataStart == targetBuffer.TellMaxPut() );
	for ( int i = 0; i < imageDirectory.Count(); i++ )
	{	
		int iScene = writeOrder[i];
		targetBuffer.Put( g_SceneFiles[iScene].compiledBuffer.Base(), g_SceneFiles[iScene].compiledBuffer.TellMaxPut() );
	}

	if ( !bQuiet )
	{
		Msg( "Scenes: Final size: %.2f MB\n", targetBuffer.TellMaxPut() / (1024.0f * 1024.0f ) );
	}

	// cleanup
	g_SceneFiles.Purge();

	return true;
}