//When a connection changes to encrypted
void ConnectionManager::ConnectionEncryptedHandler(ble_evt_t* bleEvent)
{
ConnectionManager* cm = ConnectionManager::getInstance();
Connection* c = cm->GetConnectionFromHandle(bleEvent->evt.gap_evt.conn_handle);
logt("CM", "Connection id %u is now encrypted", c->connectionId);
c->encryptionState = Connection::EncryptionState::ENCRYPTED;
//We are peripheral
if(c->direction == Connection::CONNECTION_DIRECTION_IN)
{
if(!cm->doHandshake){
c->connectionState = Connection::ConnectionState::HANDSHAKE_DONE;
}
}
//We are central
else if(c->direction == Connection::CONNECTION_DIRECTION_OUT)
{
if(cm->doHandshake)
{
c->StartHandshake();
}
//If the handshake is disabled, we just set the variable
else
{
c->connectionState = Connection::ConnectionState::HANDSHAKE_DONE;
}
}
}
//Is called whenever a connection had been established and is now disconnected
//due to a timeout, deliberate disconnection by the localhost, remote, etc,...
void ConnectionManager::DisconnectionHandler(ble_evt_t* bleEvent)
{
ConnectionManager* cm = ConnectionManager::getInstance();
Connection* connection = cm->GetConnectionFromHandle(bleEvent->evt.gap_evt.conn_handle);
if(connection == NULL) return;
//Save disconnction reason
connection->disconnectionReason = bleEvent->evt.gap_evt.params.disconnected.reason;
//LOG disconnection reason
Logger::getInstance().logError(Logger::errorTypes::HCI_ERROR, bleEvent->evt.gap_evt.params.disconnected.reason, cm->node->appTimerMs);
logt("CM", "Connection %u to %u DISCONNECTED", connection->connectionId, connection->partnerId);
//Check if the connection should be sustained (If it's been handshaked for more than 10 seconds and ran into a timeout)
if(
cm->node->appTimerMs - connection->connectionHandshakedTimestamp > 10 * 1000
&& bleEvent->evt.gap_evt.params.disconnected.reason == BLE_HCI_CONNECTION_TIMEOUT
&& cm->node->currentDiscoveryState != discoveryState::HANDSHAKE
&& cm->node->currentDiscoveryState != discoveryState::REESTABLISHING_CONNECTION
){
logt("CM", "Connection should be sustained");
//TODO: implement
/*connection->connectionState = Connection::REESTABLISHING;
cm->node->ChangeState(discoveryState::REESTABLISHING_CONNECTION);
//We assume the same role as before the connection loss
if(connection->direction == Connection::ConnectionDirection::CONNECTION_DIRECTION_IN){
//We advertise
AdvertisingController::SetAdvertisingState(advState::ADV_STATE_HIGH);
} else {
//We try to initiate the connection
GAPController::connectToPeripheral(&connection->partnerAddress, Config->meshExtendedConnectionTimeout);
}*/
}
if (connection->direction == Connection::CONNECTION_DIRECTION_IN) cm->freeInConnections++;
else cm->freeOutConnections++;
//If this was the pending connection, we clear it
if(cm->pendingConnection == connection) cm->pendingConnection = NULL;
//Notify the connection itself
connection->DisconnectionHandler(bleEvent);
//Notify the callback of the disconnection (The Node probably)
cm->connectionManagerCallback->DisconnectionHandler(bleEvent);
//Reset connection variables
connection->ResetValues();
}
//When the mesh handle has been discovered
void ConnectionManager::handleDiscoveredCallback(u16 connectionHandle, u16 characteristicHandle)
{
ConnectionManager* cm = ConnectionManager::getInstance();
Connection* connection = cm->GetConnectionFromHandle(connectionHandle);
if (connection != NULL)
{
connection->writeCharacteristicHandle = characteristicHandle;
if(cm->doHandshake) connection->StartHandshake();
else {
cm->connectionManagerCallback->ConnectionSuccessfulHandler(NULL);
}
}
}
void ConnectionManager::dataTransmittedCallback(ble_evt_t* bleEvent)
{
ConnectionManager* cm = ConnectionManager::getInstance();
//There are two types of events that trigger a dataTransmittedCallback
//A TX complete event frees a number of transmit buffers
//These are used for all connections
if(bleEvent->header.evt_id == BLE_EVT_TX_COMPLETE)
{
logt("CONN_DATA", "write_CMD complete (n=%d)", bleEvent->evt.common_evt.params.tx_complete.count);
//This connection has just been given back some transmit buffers
Connection* connection = cm->GetConnectionFromHandle(bleEvent->evt.common_evt.conn_handle);
connection->unreliableBuffersFree += bleEvent->evt.common_evt.params.tx_complete.count;
connection->sentUnreliable++;
//Next, we should continue sending packets if there are any
if(cm->GetPendingPackets()) cm->fillTransmitBuffers();
}
//The EVT_WRITE_RSP comes after a WRITE_REQ and notifies that a buffer
//for one specific connection has been cleared
else if (bleEvent->header.evt_id == BLE_GATTC_EVT_WRITE_RSP)
{
if(bleEvent->evt.gattc_evt.gatt_status != BLE_GATT_STATUS_SUCCESS)
{
logt("ERROR", "GATT status problem %d %s", bleEvent->evt.gattc_evt.gatt_status, Logger::getGattStatusErrorString(bleEvent->evt.gattc_evt.gatt_status));
//TODO: Error handling, but there really shouldn't be an error....;-)
//FIXME: Handle possible gatt status codes
}
else
{
logt("CONN_DATA", "write_REQ complete");
Connection* connection = cm->GetConnectionFromHandle(bleEvent->evt.gattc_evt.conn_handle);
//Connection could have been disconneced
if(connection == NULL) return;
connection->sentReliable++;
//Check what type of Packet has just been sent
connPacketHeader* packetHeader = (connPacketHeader*)connection->lastSentPacket;
if(packetHeader->messageType == MESSAGE_TYPE_CLUSTER_INFO_UPDATE){
//Nothing to do
} else {
logt("CONN_DATA", "Header was type %d hasMoreParts %d", packetHeader->messageType, packetHeader->hasMoreParts);
//Check if the packet has more parts
if(packetHeader->hasMoreParts == 0){
//Packet was either not split at all or is completely sent
connection->packetSendPosition = 0;
//Check if this was the end of a handshake, if yes, mark handshake as completed
if(packetHeader->messageType == MESSAGE_TYPE_CLUSTER_ACK_2)
{
//Notify Node of handshakeDone
cm->node->HandshakeDoneHandler(connection, true);
}
//Discard the last packet because it was now successfully sent
connection->packetSendQueue->DiscardNext();
} else {
//Update packet send position if we have more data
connection->packetSendPosition += MAX_DATA_SIZE_PER_WRITE - SIZEOF_CONN_PACKET_SPLIT_HEADER;
}
}
connection->reliableBuffersFree += 1;
//Now we continue sending packets
if(cm->GetPendingPackets()) cm->fillTransmitBuffers();
}
}
}
void ConnectionManager::messageReceivedCallback(ble_evt_t* bleEvent)
{
ConnectionManager* cm = ConnectionManager::getInstance();
//Handles BLE_GATTS_EVT_WRITE
//FIXME: must check for reassembly buffer size, if it is bigger, a stack overflow will occur
Connection* connection = cm->GetConnectionFromHandle(bleEvent->evt.gatts_evt.conn_handle);
if (connection != NULL)
{
//TODO: At this point we should check if the write was a valid operation for the mesh
//Invalid actions should cause a disconnect
/*if( bleEvent->evt.gatts_evt.params.write.handle != GATTController::getMeshWriteHandle() ){
connection->Disconnect();
logt("ERROR", "Non mesh device was disconnected");
}*/
connPacketHeader* packet = (connPacketHeader*)bleEvent->evt.gatts_evt.params.write.data;
//At first, some special treatment for out timestamp packet
if(packet->messageType == MESSAGE_TYPE_UPDATE_TIMESTAMP)
{
//Set our time to the received timestamp and update the time when we've received this packet
app_timer_cnt_get(&cm->node->globalTimeSetAt);
cm->node->globalTime = ((connPacketUpdateTimestamp*)packet)->timestamp;
logt("NODE", "time updated at:%u with timestamp:%u", cm->node->globalTimeSetAt, (u32)cm->node->globalTime);
}
u8 t = ((connPacketHeader*)bleEvent->evt.gatts_evt.params.write.data)->messageType;
if( t != 20 && t != 21 && t != 22 && t != 23 && t != 30 && t != 31 && t != 50 && t != 51 && t != 52 && t != 53 && t != 56 && t != 57 && t != 60 && t != 61 && t != 62 && t != 80 && t != 81){
logt("ERROR", "WAAAAAAAAAAAAAHHHHH, WRONG DATAAAAAAAAAAAAAAAAA!!!!!!!!!");
}
//Print packet as hex
char stringBuffer[100];
Logger::getInstance().convertBufferToHexString(bleEvent->evt.gatts_evt.params.write.data, bleEvent->evt.gatts_evt.params.write.len, stringBuffer, 100);
logt("CONN_DATA", "Received type %d, hasMore %d, length %d, reliable %d:", ((connPacketHeader*)bleEvent->evt.gatts_evt.params.write.data)->messageType, ((connPacketHeader*)bleEvent->evt.gatts_evt.params.write.data)->hasMoreParts, bleEvent->evt.gatts_evt.params.write.len, bleEvent->evt.gatts_evt.params.write.op);
logt("CONN_DATA", "%s", stringBuffer);
//Check if we need to reassemble the packet
if(connection->packetReassemblyPosition == 0 && packet->hasMoreParts == 0)
{
//Single packet, no more data
connectionPacket p;
p.connectionHandle = bleEvent->evt.gatts_evt.conn_handle;
p.data = bleEvent->evt.gatts_evt.params.write.data;
p.dataLength = bleEvent->evt.gatts_evt.params.write.len;
p.reliable = bleEvent->evt.gatts_evt.params.write.op == BLE_GATTS_OP_WRITE_CMD ? false : true;
connection->ReceivePacketHandler(&p);
}
//First of a multipart packet, still has more parts
else if(connection->packetReassemblyPosition == 0 && packet->hasMoreParts)
{
//Save at correct position of
memcpy(
connection->packetReassemblyBuffer,
bleEvent->evt.gatts_evt.params.write.data,
bleEvent->evt.gatts_evt.params.write.len
);
connection->packetReassemblyPosition += bleEvent->evt.gatts_evt.params.write.len;
//Do not notify anyone until packet is finished
logt("CM", "Received first part of message");
}
//Multipart packet, intermediate or last frame
else if(connection->packetReassemblyPosition != 0)
{
memcpy(
connection->packetReassemblyBuffer + connection->packetReassemblyPosition,
bleEvent->evt.gatts_evt.params.write.data + SIZEOF_CONN_PACKET_SPLIT_HEADER,
bleEvent->evt.gatts_evt.params.write.len - SIZEOF_CONN_PACKET_SPLIT_HEADER
);
//Intermediate packet
if(packet->hasMoreParts){
connection->packetReassemblyPosition += bleEvent->evt.gatts_evt.params.write.len - SIZEOF_CONN_PACKET_SPLIT_HEADER;
logt("CM", "Received middle part of message");
//Final packet
} else {
logt("CM", "Received last part of message");
//Notify connection
connectionPacket p;
p.connectionHandle = bleEvent->evt.gatts_evt.conn_handle;
p.data = connection->packetReassemblyBuffer;
p.dataLength = bleEvent->evt.gatts_evt.params.write.len + connection->packetReassemblyPosition - SIZEOF_CONN_PACKET_SPLIT_HEADER;
p.reliable = bleEvent->evt.gatts_evt.params.write.op == BLE_GATTS_OP_WRITE_CMD ? false : true;
//Reset the assembly buffer
connection->packetReassemblyPosition = 0;
connection->ReceivePacketHandler(&p);
}
}
}
}
