/*
* This is the real print function: print the active screen
*/
void SCH_PRINTOUT::DrawPage( SCH_SCREEN* aScreen )
{
int oldZoom;
wxPoint tmp_startvisu;
wxSize pageSizeIU; // Page size in internal units
wxPoint old_org;
EDA_RECT oldClipBox;
wxRect fitRect;
wxDC* dc = GetDC();
EDA_DRAW_PANEL* panel = m_parent->GetCanvas();
wxBusyCursor dummy;
// Save current scale factor, offsets, and clip box.
tmp_startvisu = aScreen->m_StartVisu;
oldZoom = aScreen->GetZoom();
old_org = aScreen->m_DrawOrg;
oldClipBox = *panel->GetClipBox();
// Change clip box to print the whole page.
#define MAX_VALUE (INT_MAX/2) // MAX_VALUE is the max we can use in an integer
// and that allows calculations without overflow
panel->SetClipBox( EDA_RECT( wxPoint( 0, 0 ), wxSize( MAX_VALUE, MAX_VALUE ) ) );
// Change scale factor and offset to print the whole page.
bool printReference = m_parent->GetPrintSheetReference();
pageSizeIU = aScreen->GetPageSettings().GetSizeIU();
FitThisSizeToPaper( pageSizeIU );
fitRect = GetLogicalPaperRect();
wxLogDebug( wxT( "Fit rectangle: x = %d, y = %d, w = %d, h = %d" ),
fitRect.x, fitRect.y, fitRect.width, fitRect.height );
// When is the actual paper size does not match the schematic page
// size, the drawing is not perfectly centered on X or Y axis.
// Give a draw offset centers the schematic page on the paper draw area
// Because the sizes are fitted, only an Y or X offset is needed
// and both are 0 when sizes are identical.
// Y or Y offset is not null when the X/Y size ratio differs between
// the actual paper size and the schematic page
int xoffset = ( fitRect.width - pageSizeIU.x ) / 2;
// For an obscure reason, OffsetLogicalOrigin creates issues,
// under some circumstances, when yoffset is not always null
// and changes from a page to an other page
// This is only a workaround, not a fix
// see https://bugs.launchpad.net/kicad/+bug/1464773
// xoffset does not create issues.
#if 0 // FIX ME
int yoffset = ( fitRect.height - pageSizeIU.y ) / 2;
#else
// the Y centering will be not perfect, but this is less annoying
// than a blank page or a buggy centering
int yoffset = 0;
#endif
OffsetLogicalOrigin( xoffset, yoffset );
GRResetPenAndBrush( dc );
if( m_parent->GetPrintMonochrome() )
GRForceBlackPen( true );
aScreen->m_IsPrinting = true;
EDA_COLOR_T bg_color = m_parent->GetDrawBgColor();
aScreen->Draw( panel, dc, (GR_DRAWMODE) 0 );
if( printReference )
m_parent->DrawWorkSheet( dc, aScreen, GetDefaultLineThickness(),
IU_PER_MILS, aScreen->GetFileName() );
m_parent->SetDrawBgColor( bg_color );
aScreen->m_IsPrinting = false;
panel->SetClipBox( oldClipBox );
GRForceBlackPen( false );
aScreen->m_StartVisu = tmp_startvisu;
aScreen->m_DrawOrg = old_org;
aScreen->SetZoom( oldZoom );
}
void BOARD_PRINTOUT_CONTROLLER::DrawPage()
{
wxPoint offset;
double userscale;
EDA_RECT boardBoundingBox;
EDA_RECT drawRect;
wxDC* dc = GetDC();
BASE_SCREEN* screen = m_Parent->GetScreen();
bool printMirror = m_PrintParams.m_PrintMirror;
wxSize pageSizeIU = m_Parent->GetPageSizeIU();
wxBusyCursor dummy;
#if defined (PCBNEW)
BOARD * brd = ((PCB_BASE_FRAME*) m_Parent)->GetBoard();
boardBoundingBox = brd->ComputeBoundingBox();
wxString titleblockFilename = brd->GetFileName();
#elif defined (GERBVIEW)
boardBoundingBox = ((GERBVIEW_FRAME*) m_Parent)->GetGerberLayoutBoundingBox();
wxString titleblockFilename; // TODO see if we uses the gerber file name
#else
#error BOARD_PRINTOUT_CONTROLLER::DrawPage() works only for PCBNEW or GERBVIEW
#endif
// Use the page size as the drawing area when the board is shown or the user scale
// is less than 1.
if( m_PrintParams.PrintBorderAndTitleBlock() )
boardBoundingBox = EDA_RECT( wxPoint( 0, 0 ), pageSizeIU );
wxLogTrace( tracePrinting, wxT( "Drawing bounding box: x=%d, y=%d, w=%d, h=%d" ),
boardBoundingBox.GetX(), boardBoundingBox.GetY(),
boardBoundingBox.GetWidth(), boardBoundingBox.GetHeight() );
// Compute the PCB size in internal units
userscale = m_PrintParams.m_PrintScale;
if( m_PrintParams.m_PrintScale == 0 ) // fit in page option
{
if(boardBoundingBox.GetWidth() && boardBoundingBox.GetHeight())
{
int margin = Millimeter2iu( 10.0 ); // add a margin around the drawings
double scaleX = (double)(pageSizeIU.x - (2 * margin)) /
boardBoundingBox.GetWidth();
double scaleY = (double)(pageSizeIU.y - (2 * margin)) /
boardBoundingBox.GetHeight();
userscale = (scaleX < scaleY) ? scaleX : scaleY;
}
else
userscale = 1.0;
}
wxSize scaledPageSize = pageSizeIU;
drawRect.SetSize( scaledPageSize );
scaledPageSize.x = wxRound( scaledPageSize.x / userscale );
scaledPageSize.y = wxRound( scaledPageSize.y / userscale );
if( m_PrintParams.m_PageSetupData )
{
wxLogTrace( tracePrinting, wxT( "Fit size to page margins: x=%d, y=%d" ),
scaledPageSize.x, scaledPageSize.y );
// Always scale to the size of the paper.
FitThisSizeToPageMargins( scaledPageSize, *m_PrintParams.m_PageSetupData );
}
// Compute Accurate scale 1
if( m_PrintParams.m_PrintScale == 1.0 )
{
// We want a 1:1 scale, regardless the page setup
// like page size, margin ...
MapScreenSizeToPaper(); // set best scale and offset (scale is not used)
int w, h;
GetPPIPrinter( &w, &h );
double accurate_Xscale = (double) w / (IU_PER_MILS*1000);
double accurate_Yscale = (double) h / (IU_PER_MILS*1000);
if( IsPreview() ) // Scale must take in account the DC size in Preview
{
// Get the size of the DC in pixels
wxSize PlotAreaSize;
dc->GetSize( &PlotAreaSize.x, &PlotAreaSize.y );
GetPageSizePixels( &w, &h );
accurate_Xscale *= (double)PlotAreaSize.x / w;
accurate_Yscale *= (double)PlotAreaSize.y / h;
}
// Fine scale adjust
accurate_Xscale *= m_PrintParams.m_XScaleAdjust;
accurate_Yscale *= m_PrintParams.m_YScaleAdjust;
// Set print scale for 1:1 exact scale
dc->SetUserScale( accurate_Xscale, accurate_Yscale );
}
// Get the final size of the DC in pixels
wxSize PlotAreaSizeInPixels;
dc->GetSize( &PlotAreaSizeInPixels.x, &PlotAreaSizeInPixels.y );
wxLogTrace( tracePrinting, wxT( "Plot area in pixels: x=%d, y=%d" ),
PlotAreaSizeInPixels.x, PlotAreaSizeInPixels.y );
double scalex, scaley;
dc->GetUserScale( &scalex, &scaley );
wxLogTrace( tracePrinting, wxT( "DC user scale: x=%g, y=%g" ),
scalex, scaley );
wxSize PlotAreaSizeInUserUnits;
PlotAreaSizeInUserUnits.x = KiROUND( PlotAreaSizeInPixels.x / scalex );
PlotAreaSizeInUserUnits.y = KiROUND( PlotAreaSizeInPixels.y / scaley );
wxLogTrace( tracePrinting, wxT( "Scaled plot area in user units: x=%d, y=%d" ),
PlotAreaSizeInUserUnits.x, PlotAreaSizeInUserUnits.y );
// In module editor, the module is located at 0,0 but for printing
// it is moved to pageSizeIU.x/2, pageSizeIU.y/2.
// So the equivalent board must be moved to the center of the page:
if( m_Parent->IsType( FRAME_PCB_MODULE_EDITOR ) )
{
boardBoundingBox.Move( wxPoint( pageSizeIU.x/2, pageSizeIU.y/2 ) );
}
// In some cases the plot origin is the centre of the board outline rather than the center
// of the selected paper size.
if( m_PrintParams.CenterOnBoardOutline() )
{
// Here we are only drawing the board and it's contents.
drawRect = boardBoundingBox;
offset.x += wxRound( (double) -scaledPageSize.x / 2.0 );
offset.y += wxRound( (double) -scaledPageSize.y / 2.0 );
wxPoint center = boardBoundingBox.Centre();
if( printMirror )
{
// Calculate the mirrored center of the board.
center.x = m_Parent->GetPageSizeIU().x - boardBoundingBox.Centre().x;
}
offset += center;
}
GRResetPenAndBrush( dc );
EDA_DRAW_PANEL* panel = m_Parent->GetCanvas();
EDA_RECT tmp = *panel->GetClipBox();
// Set clip box to the max size
#define MAX_VALUE (INT_MAX/2) // MAX_VALUE is the max we can use in an integer
// and that allows calculations without overflow
panel->SetClipBox( EDA_RECT( wxPoint( 0, 0 ), wxSize( MAX_VALUE, MAX_VALUE ) ) );
screen->m_IsPrinting = true;
EDA_COLOR_T bg_color = m_Parent->GetDrawBgColor();
// Print frame reference, if requested, before
if( m_PrintParams.m_Print_Black_and_White )
GRForceBlackPen( true );
if( m_PrintParams.PrintBorderAndTitleBlock() )
m_Parent->DrawWorkSheet( dc, screen, m_PrintParams.m_PenDefaultSize,
IU_PER_MILS, titleblockFilename );
if( printMirror )
{
// To plot mirror, we reverse the x axis, and modify the plot x origin
dc->SetAxisOrientation( false, false);
/* Plot offset x is moved by the x plot area size in order to have
* the old draw area in the new draw area, because the draw origin has not moved
* (this is the upper left corner) but the X axis is reversed, therefore the plotting area
* is the x coordinate values from - PlotAreaSize.x to 0 */
int x_dc_offset = PlotAreaSizeInPixels.x;
x_dc_offset = KiROUND( x_dc_offset * userscale );
dc->SetDeviceOrigin( x_dc_offset, 0 );
wxLogTrace( tracePrinting, wxT( "Device origin: x=%d, y=%d" ),
x_dc_offset, 0 );
panel->SetClipBox( EDA_RECT( wxPoint( -MAX_VALUE/2, -MAX_VALUE/2 ),
panel->GetClipBox()->GetSize() ) );
}
// screen->m_DrawOrg = offset;
dc->SetLogicalOrigin( offset.x, offset.y );
wxLogTrace( tracePrinting, wxT( "Logical origin: x=%d, y=%d" ),
offset.x, offset.y );
#if defined(wxUSE_LOG_TRACE) && defined( DEBUG )
wxRect paperRect = GetPaperRectPixels();
wxLogTrace( tracePrinting, wxT( "Paper rectangle: left=%d, top=%d, "
"right=%d, bottom=%d" ),
paperRect.GetLeft(), paperRect.GetTop(), paperRect.GetRight(),
paperRect.GetBottom() );
int devLeft = dc->LogicalToDeviceX( drawRect.GetX() );
int devTop = dc->LogicalToDeviceY( drawRect.GetY() );
int devRight = dc->LogicalToDeviceX( drawRect.GetRight() );
int devBottom = dc->LogicalToDeviceY( drawRect.GetBottom() );
wxLogTrace( tracePrinting, wxT( "Final device rectangle: left=%d, top=%d, "
"right=%d, bottom=%d\n" ),
devLeft, devTop, devRight, devBottom );
#endif
m_Parent->SetDrawBgColor( WHITE );
/* when printing in color mode, we use the graphic OR mode that gives the same look as
* the screen but because the background is white when printing, we must use a trick:
* In order to plot on a white background in OR mode we must:
* 1 - Plot all items in black, this creates a local black background
* 2 - Plot in OR mode on black "local" background
*/
if( !m_PrintParams.m_Print_Black_and_White )
{
// Creates a "local" black background
GRForceBlackPen( true );
m_Parent->PrintPage( dc, m_PrintParams.m_PrintMaskLayer,
printMirror, &m_PrintParams );
GRForceBlackPen( false );
}
else
GRForceBlackPen( true );
#if defined (GERBVIEW)
// In B&W mode, do not force black pen for Gerbview
// because negative objects need a white pen, not a black pen
// B&W mode is handled in print page
GRForceBlackPen( false );
#endif
m_Parent->PrintPage( dc, m_PrintParams.m_PrintMaskLayer, printMirror,
&m_PrintParams );
m_Parent->SetDrawBgColor( bg_color );
screen->m_IsPrinting = false;
panel->SetClipBox( tmp );
GRForceBlackPen( false );
}
void BOARD_PRINTOUT_CONTROLLER::DrawPage()
{
wxPoint offset;
double userscale;
EDA_RECT boardBoundingBox;
EDA_RECT drawRect;
wxDC* dc = GetDC();
BASE_SCREEN* screen = m_Parent->GetScreen();
bool printMirror = m_PrintParams.m_PrintMirror;
wxSize pageSizeIU = m_Parent->GetPageSizeIU();
wxBusyCursor dummy;
boardBoundingBox = ((GERBVIEW_FRAME*) m_Parent)->GetGerberLayoutBoundingBox();
wxString titleblockFilename; // TODO see if we uses the gerber file name
// Use the page size as the drawing area when the board is shown or the user scale
// is less than 1.
if( m_PrintParams.PrintBorderAndTitleBlock() )
boardBoundingBox = EDA_RECT( wxPoint( 0, 0 ), pageSizeIU );
// Compute the PCB size in internal units
userscale = m_PrintParams.m_PrintScale;
if( m_PrintParams.m_PrintScale == 0 ) // fit in page option
{
if(boardBoundingBox.GetWidth() && boardBoundingBox.GetHeight())
{
int margin = Millimeter2iu( 10.0 ); // add a margin around the drawings
double scaleX = (double)(pageSizeIU.x - (2 * margin)) /
boardBoundingBox.GetWidth();
double scaleY = (double)(pageSizeIU.y - (2 * margin)) /
boardBoundingBox.GetHeight();
userscale = (scaleX < scaleY) ? scaleX : scaleY;
}
else
userscale = 1.0;
}
wxSize scaledPageSize = pageSizeIU;
drawRect.SetSize( scaledPageSize );
scaledPageSize.x = wxRound( scaledPageSize.x / userscale );
scaledPageSize.y = wxRound( scaledPageSize.y / userscale );
if( m_PrintParams.m_PageSetupData )
{
// Always scale to the size of the paper.
FitThisSizeToPageMargins( scaledPageSize, *m_PrintParams.m_PageSetupData );
}
// Compute Accurate scale 1
if( m_PrintParams.m_PrintScale == 1.0 )
{
// We want a 1:1 scale, regardless the page setup
// like page size, margin ...
MapScreenSizeToPaper(); // set best scale and offset (scale is not used)
int w, h;
GetPPIPrinter( &w, &h );
double accurate_Xscale = (double) w / (IU_PER_MILS*1000);
double accurate_Yscale = (double) h / (IU_PER_MILS*1000);
if( IsPreview() ) // Scale must take in account the DC size in Preview
{
// Get the size of the DC in pixels
wxSize PlotAreaSize;
dc->GetSize( &PlotAreaSize.x, &PlotAreaSize.y );
GetPageSizePixels( &w, &h );
accurate_Xscale *= (double)PlotAreaSize.x / w;
accurate_Yscale *= (double)PlotAreaSize.y / h;
}
// Fine scale adjust
accurate_Xscale *= m_PrintParams.m_XScaleAdjust;
accurate_Yscale *= m_PrintParams.m_YScaleAdjust;
// Set print scale for 1:1 exact scale
dc->SetUserScale( accurate_Xscale, accurate_Yscale );
}
// Get the final size of the DC in pixels
wxSize PlotAreaSizeInPixels;
dc->GetSize( &PlotAreaSizeInPixels.x, &PlotAreaSizeInPixels.y );
double scalex, scaley;
dc->GetUserScale( &scalex, &scaley );
// In some cases the plot origin is the centre of the board outline rather than the center
// of the selected paper size.
if( m_PrintParams.CenterOnBoardOutline() )
{
// Here we are only drawing the board and it's contents.
drawRect = boardBoundingBox;
offset.x += wxRound( (double) -scaledPageSize.x / 2.0 );
offset.y += wxRound( (double) -scaledPageSize.y / 2.0 );
wxPoint center = boardBoundingBox.Centre();
if( printMirror )
{
// Calculate the mirrored center of the board.
center.x = m_Parent->GetPageSizeIU().x - boardBoundingBox.Centre().x;
}
offset += center;
}
GRResetPenAndBrush( dc );
EDA_DRAW_PANEL* panel = m_Parent->GetCanvas();
EDA_RECT tmp = *panel->GetClipBox();
// Set clip box to the max size
#define MAX_VALUE (INT_MAX/2) // MAX_VALUE is the max we can use in an integer
// and that allows calculations without overflow
panel->SetClipBox( EDA_RECT( wxPoint( 0, 0 ), wxSize( MAX_VALUE, MAX_VALUE ) ) );
screen->m_IsPrinting = true;
EDA_COLOR_T bg_color = m_Parent->GetDrawBgColor();
// Print frame reference, if requested, before printing draw layers
if( m_PrintParams.m_Print_Black_and_White )
GRForceBlackPen( true );
if( m_PrintParams.PrintBorderAndTitleBlock() )
m_Parent->DrawWorkSheet( dc, screen, m_PrintParams.m_PenDefaultSize,
IU_PER_MILS, titleblockFilename );
if( printMirror )
{
// To plot mirror, we reverse the x axis, and modify the plot x origin
dc->SetAxisOrientation( false, false );
/* Change plot offset in order to have the draw area at the same location.
* The plot origin X is just moved from 0 to PlotAreaSizeInPixels.x.
* just set offset x at PlotAreaSizeInPixels.x.
*/
int x_dc_offset = PlotAreaSizeInPixels.x;
x_dc_offset = KiROUND( x_dc_offset * userscale );
dc->SetDeviceOrigin( x_dc_offset, 0 );
panel->SetClipBox( EDA_RECT( wxPoint( -MAX_VALUE / 2, -MAX_VALUE / 2 ),
panel->GetClipBox()->GetSize() ) );
}
// screen->m_DrawOrg = offset;
dc->SetLogicalOrigin( offset.x, offset.y );
m_Parent->SetDrawBgColor( WHITE );
// Never force black pen to print draw layers
// because negative objects need a white pen, not a black pen
// B&W mode is handled in print page function
GRForceBlackPen( false );
m_Parent->PrintPage( dc, m_PrintParams.m_PrintMaskLayer, printMirror, &m_PrintParams );
m_Parent->SetDrawBgColor( bg_color );
screen->m_IsPrinting = false;
panel->SetClipBox( tmp );
}
