/* * This is the real print function: print the active screen */ void SCH_PRINTOUT::DrawPage( SCH_SCREEN* aScreen ) { int oldZoom; wxPoint tmp_startvisu; wxSize pageSizeIU; // Page size in internal units wxPoint old_org; EDA_RECT oldClipBox; wxRect fitRect; wxDC* dc = GetDC(); EDA_DRAW_PANEL* panel = m_parent->GetCanvas(); wxBusyCursor dummy; // Save current scale factor, offsets, and clip box. tmp_startvisu = aScreen->m_StartVisu; oldZoom = aScreen->GetZoom(); old_org = aScreen->m_DrawOrg; oldClipBox = *panel->GetClipBox(); // Change clip box to print the whole page. #define MAX_VALUE (INT_MAX/2) // MAX_VALUE is the max we can use in an integer // and that allows calculations without overflow panel->SetClipBox( EDA_RECT( wxPoint( 0, 0 ), wxSize( MAX_VALUE, MAX_VALUE ) ) ); // Change scale factor and offset to print the whole page. bool printReference = m_parent->GetPrintSheetReference(); pageSizeIU = aScreen->GetPageSettings().GetSizeIU(); FitThisSizeToPaper( pageSizeIU ); fitRect = GetLogicalPaperRect(); wxLogDebug( wxT( "Fit rectangle: x = %d, y = %d, w = %d, h = %d" ), fitRect.x, fitRect.y, fitRect.width, fitRect.height ); // When is the actual paper size does not match the schematic page // size, the drawing is not perfectly centered on X or Y axis. // Give a draw offset centers the schematic page on the paper draw area // Because the sizes are fitted, only an Y or X offset is needed // and both are 0 when sizes are identical. // Y or Y offset is not null when the X/Y size ratio differs between // the actual paper size and the schematic page int xoffset = ( fitRect.width - pageSizeIU.x ) / 2; // For an obscure reason, OffsetLogicalOrigin creates issues, // under some circumstances, when yoffset is not always null // and changes from a page to an other page // This is only a workaround, not a fix // see https://bugs.launchpad.net/kicad/+bug/1464773 // xoffset does not create issues. #if 0 // FIX ME int yoffset = ( fitRect.height - pageSizeIU.y ) / 2; #else // the Y centering will be not perfect, but this is less annoying // than a blank page or a buggy centering int yoffset = 0; #endif OffsetLogicalOrigin( xoffset, yoffset ); GRResetPenAndBrush( dc ); if( m_parent->GetPrintMonochrome() ) GRForceBlackPen( true ); aScreen->m_IsPrinting = true; EDA_COLOR_T bg_color = m_parent->GetDrawBgColor(); aScreen->Draw( panel, dc, (GR_DRAWMODE) 0 ); if( printReference ) m_parent->DrawWorkSheet( dc, aScreen, GetDefaultLineThickness(), IU_PER_MILS, aScreen->GetFileName() ); m_parent->SetDrawBgColor( bg_color ); aScreen->m_IsPrinting = false; panel->SetClipBox( oldClipBox ); GRForceBlackPen( false ); aScreen->m_StartVisu = tmp_startvisu; aScreen->m_DrawOrg = old_org; aScreen->SetZoom( oldZoom ); }
void BOARD_PRINTOUT_CONTROLLER::DrawPage() { wxPoint offset; double userscale; EDA_RECT boardBoundingBox; EDA_RECT drawRect; wxDC* dc = GetDC(); BASE_SCREEN* screen = m_Parent->GetScreen(); bool printMirror = m_PrintParams.m_PrintMirror; wxSize pageSizeIU = m_Parent->GetPageSizeIU(); wxBusyCursor dummy; #if defined (PCBNEW) BOARD * brd = ((PCB_BASE_FRAME*) m_Parent)->GetBoard(); boardBoundingBox = brd->ComputeBoundingBox(); wxString titleblockFilename = brd->GetFileName(); #elif defined (GERBVIEW) boardBoundingBox = ((GERBVIEW_FRAME*) m_Parent)->GetGerberLayoutBoundingBox(); wxString titleblockFilename; // TODO see if we uses the gerber file name #else #error BOARD_PRINTOUT_CONTROLLER::DrawPage() works only for PCBNEW or GERBVIEW #endif // Use the page size as the drawing area when the board is shown or the user scale // is less than 1. if( m_PrintParams.PrintBorderAndTitleBlock() ) boardBoundingBox = EDA_RECT( wxPoint( 0, 0 ), pageSizeIU ); wxLogTrace( tracePrinting, wxT( "Drawing bounding box: x=%d, y=%d, w=%d, h=%d" ), boardBoundingBox.GetX(), boardBoundingBox.GetY(), boardBoundingBox.GetWidth(), boardBoundingBox.GetHeight() ); // Compute the PCB size in internal units userscale = m_PrintParams.m_PrintScale; if( m_PrintParams.m_PrintScale == 0 ) // fit in page option { if(boardBoundingBox.GetWidth() && boardBoundingBox.GetHeight()) { int margin = Millimeter2iu( 10.0 ); // add a margin around the drawings double scaleX = (double)(pageSizeIU.x - (2 * margin)) / boardBoundingBox.GetWidth(); double scaleY = (double)(pageSizeIU.y - (2 * margin)) / boardBoundingBox.GetHeight(); userscale = (scaleX < scaleY) ? scaleX : scaleY; } else userscale = 1.0; } wxSize scaledPageSize = pageSizeIU; drawRect.SetSize( scaledPageSize ); scaledPageSize.x = wxRound( scaledPageSize.x / userscale ); scaledPageSize.y = wxRound( scaledPageSize.y / userscale ); if( m_PrintParams.m_PageSetupData ) { wxLogTrace( tracePrinting, wxT( "Fit size to page margins: x=%d, y=%d" ), scaledPageSize.x, scaledPageSize.y ); // Always scale to the size of the paper. FitThisSizeToPageMargins( scaledPageSize, *m_PrintParams.m_PageSetupData ); } // Compute Accurate scale 1 if( m_PrintParams.m_PrintScale == 1.0 ) { // We want a 1:1 scale, regardless the page setup // like page size, margin ... MapScreenSizeToPaper(); // set best scale and offset (scale is not used) int w, h; GetPPIPrinter( &w, &h ); double accurate_Xscale = (double) w / (IU_PER_MILS*1000); double accurate_Yscale = (double) h / (IU_PER_MILS*1000); if( IsPreview() ) // Scale must take in account the DC size in Preview { // Get the size of the DC in pixels wxSize PlotAreaSize; dc->GetSize( &PlotAreaSize.x, &PlotAreaSize.y ); GetPageSizePixels( &w, &h ); accurate_Xscale *= (double)PlotAreaSize.x / w; accurate_Yscale *= (double)PlotAreaSize.y / h; } // Fine scale adjust accurate_Xscale *= m_PrintParams.m_XScaleAdjust; accurate_Yscale *= m_PrintParams.m_YScaleAdjust; // Set print scale for 1:1 exact scale dc->SetUserScale( accurate_Xscale, accurate_Yscale ); } // Get the final size of the DC in pixels wxSize PlotAreaSizeInPixels; dc->GetSize( &PlotAreaSizeInPixels.x, &PlotAreaSizeInPixels.y ); wxLogTrace( tracePrinting, wxT( "Plot area in pixels: x=%d, y=%d" ), PlotAreaSizeInPixels.x, PlotAreaSizeInPixels.y ); double scalex, scaley; dc->GetUserScale( &scalex, &scaley ); wxLogTrace( tracePrinting, wxT( "DC user scale: x=%g, y=%g" ), scalex, scaley ); wxSize PlotAreaSizeInUserUnits; PlotAreaSizeInUserUnits.x = KiROUND( PlotAreaSizeInPixels.x / scalex ); PlotAreaSizeInUserUnits.y = KiROUND( PlotAreaSizeInPixels.y / scaley ); wxLogTrace( tracePrinting, wxT( "Scaled plot area in user units: x=%d, y=%d" ), PlotAreaSizeInUserUnits.x, PlotAreaSizeInUserUnits.y ); // In module editor, the module is located at 0,0 but for printing // it is moved to pageSizeIU.x/2, pageSizeIU.y/2. // So the equivalent board must be moved to the center of the page: if( m_Parent->IsType( FRAME_PCB_MODULE_EDITOR ) ) { boardBoundingBox.Move( wxPoint( pageSizeIU.x/2, pageSizeIU.y/2 ) ); } // In some cases the plot origin is the centre of the board outline rather than the center // of the selected paper size. if( m_PrintParams.CenterOnBoardOutline() ) { // Here we are only drawing the board and it's contents. drawRect = boardBoundingBox; offset.x += wxRound( (double) -scaledPageSize.x / 2.0 ); offset.y += wxRound( (double) -scaledPageSize.y / 2.0 ); wxPoint center = boardBoundingBox.Centre(); if( printMirror ) { // Calculate the mirrored center of the board. center.x = m_Parent->GetPageSizeIU().x - boardBoundingBox.Centre().x; } offset += center; } GRResetPenAndBrush( dc ); EDA_DRAW_PANEL* panel = m_Parent->GetCanvas(); EDA_RECT tmp = *panel->GetClipBox(); // Set clip box to the max size #define MAX_VALUE (INT_MAX/2) // MAX_VALUE is the max we can use in an integer // and that allows calculations without overflow panel->SetClipBox( EDA_RECT( wxPoint( 0, 0 ), wxSize( MAX_VALUE, MAX_VALUE ) ) ); screen->m_IsPrinting = true; EDA_COLOR_T bg_color = m_Parent->GetDrawBgColor(); // Print frame reference, if requested, before if( m_PrintParams.m_Print_Black_and_White ) GRForceBlackPen( true ); if( m_PrintParams.PrintBorderAndTitleBlock() ) m_Parent->DrawWorkSheet( dc, screen, m_PrintParams.m_PenDefaultSize, IU_PER_MILS, titleblockFilename ); if( printMirror ) { // To plot mirror, we reverse the x axis, and modify the plot x origin dc->SetAxisOrientation( false, false); /* Plot offset x is moved by the x plot area size in order to have * the old draw area in the new draw area, because the draw origin has not moved * (this is the upper left corner) but the X axis is reversed, therefore the plotting area * is the x coordinate values from - PlotAreaSize.x to 0 */ int x_dc_offset = PlotAreaSizeInPixels.x; x_dc_offset = KiROUND( x_dc_offset * userscale ); dc->SetDeviceOrigin( x_dc_offset, 0 ); wxLogTrace( tracePrinting, wxT( "Device origin: x=%d, y=%d" ), x_dc_offset, 0 ); panel->SetClipBox( EDA_RECT( wxPoint( -MAX_VALUE/2, -MAX_VALUE/2 ), panel->GetClipBox()->GetSize() ) ); } // screen->m_DrawOrg = offset; dc->SetLogicalOrigin( offset.x, offset.y ); wxLogTrace( tracePrinting, wxT( "Logical origin: x=%d, y=%d" ), offset.x, offset.y ); #if defined(wxUSE_LOG_TRACE) && defined( DEBUG ) wxRect paperRect = GetPaperRectPixels(); wxLogTrace( tracePrinting, wxT( "Paper rectangle: left=%d, top=%d, " "right=%d, bottom=%d" ), paperRect.GetLeft(), paperRect.GetTop(), paperRect.GetRight(), paperRect.GetBottom() ); int devLeft = dc->LogicalToDeviceX( drawRect.GetX() ); int devTop = dc->LogicalToDeviceY( drawRect.GetY() ); int devRight = dc->LogicalToDeviceX( drawRect.GetRight() ); int devBottom = dc->LogicalToDeviceY( drawRect.GetBottom() ); wxLogTrace( tracePrinting, wxT( "Final device rectangle: left=%d, top=%d, " "right=%d, bottom=%d\n" ), devLeft, devTop, devRight, devBottom ); #endif m_Parent->SetDrawBgColor( WHITE ); /* when printing in color mode, we use the graphic OR mode that gives the same look as * the screen but because the background is white when printing, we must use a trick: * In order to plot on a white background in OR mode we must: * 1 - Plot all items in black, this creates a local black background * 2 - Plot in OR mode on black "local" background */ if( !m_PrintParams.m_Print_Black_and_White ) { // Creates a "local" black background GRForceBlackPen( true ); m_Parent->PrintPage( dc, m_PrintParams.m_PrintMaskLayer, printMirror, &m_PrintParams ); GRForceBlackPen( false ); } else GRForceBlackPen( true ); #if defined (GERBVIEW) // In B&W mode, do not force black pen for Gerbview // because negative objects need a white pen, not a black pen // B&W mode is handled in print page GRForceBlackPen( false ); #endif m_Parent->PrintPage( dc, m_PrintParams.m_PrintMaskLayer, printMirror, &m_PrintParams ); m_Parent->SetDrawBgColor( bg_color ); screen->m_IsPrinting = false; panel->SetClipBox( tmp ); GRForceBlackPen( false ); }
void BOARD_PRINTOUT_CONTROLLER::DrawPage() { wxPoint offset; double userscale; EDA_RECT boardBoundingBox; EDA_RECT drawRect; wxDC* dc = GetDC(); BASE_SCREEN* screen = m_Parent->GetScreen(); bool printMirror = m_PrintParams.m_PrintMirror; wxSize pageSizeIU = m_Parent->GetPageSizeIU(); wxBusyCursor dummy; boardBoundingBox = ((GERBVIEW_FRAME*) m_Parent)->GetGerberLayoutBoundingBox(); wxString titleblockFilename; // TODO see if we uses the gerber file name // Use the page size as the drawing area when the board is shown or the user scale // is less than 1. if( m_PrintParams.PrintBorderAndTitleBlock() ) boardBoundingBox = EDA_RECT( wxPoint( 0, 0 ), pageSizeIU ); // Compute the PCB size in internal units userscale = m_PrintParams.m_PrintScale; if( m_PrintParams.m_PrintScale == 0 ) // fit in page option { if(boardBoundingBox.GetWidth() && boardBoundingBox.GetHeight()) { int margin = Millimeter2iu( 10.0 ); // add a margin around the drawings double scaleX = (double)(pageSizeIU.x - (2 * margin)) / boardBoundingBox.GetWidth(); double scaleY = (double)(pageSizeIU.y - (2 * margin)) / boardBoundingBox.GetHeight(); userscale = (scaleX < scaleY) ? scaleX : scaleY; } else userscale = 1.0; } wxSize scaledPageSize = pageSizeIU; drawRect.SetSize( scaledPageSize ); scaledPageSize.x = wxRound( scaledPageSize.x / userscale ); scaledPageSize.y = wxRound( scaledPageSize.y / userscale ); if( m_PrintParams.m_PageSetupData ) { // Always scale to the size of the paper. FitThisSizeToPageMargins( scaledPageSize, *m_PrintParams.m_PageSetupData ); } // Compute Accurate scale 1 if( m_PrintParams.m_PrintScale == 1.0 ) { // We want a 1:1 scale, regardless the page setup // like page size, margin ... MapScreenSizeToPaper(); // set best scale and offset (scale is not used) int w, h; GetPPIPrinter( &w, &h ); double accurate_Xscale = (double) w / (IU_PER_MILS*1000); double accurate_Yscale = (double) h / (IU_PER_MILS*1000); if( IsPreview() ) // Scale must take in account the DC size in Preview { // Get the size of the DC in pixels wxSize PlotAreaSize; dc->GetSize( &PlotAreaSize.x, &PlotAreaSize.y ); GetPageSizePixels( &w, &h ); accurate_Xscale *= (double)PlotAreaSize.x / w; accurate_Yscale *= (double)PlotAreaSize.y / h; } // Fine scale adjust accurate_Xscale *= m_PrintParams.m_XScaleAdjust; accurate_Yscale *= m_PrintParams.m_YScaleAdjust; // Set print scale for 1:1 exact scale dc->SetUserScale( accurate_Xscale, accurate_Yscale ); } // Get the final size of the DC in pixels wxSize PlotAreaSizeInPixels; dc->GetSize( &PlotAreaSizeInPixels.x, &PlotAreaSizeInPixels.y ); double scalex, scaley; dc->GetUserScale( &scalex, &scaley ); // In some cases the plot origin is the centre of the board outline rather than the center // of the selected paper size. if( m_PrintParams.CenterOnBoardOutline() ) { // Here we are only drawing the board and it's contents. drawRect = boardBoundingBox; offset.x += wxRound( (double) -scaledPageSize.x / 2.0 ); offset.y += wxRound( (double) -scaledPageSize.y / 2.0 ); wxPoint center = boardBoundingBox.Centre(); if( printMirror ) { // Calculate the mirrored center of the board. center.x = m_Parent->GetPageSizeIU().x - boardBoundingBox.Centre().x; } offset += center; } GRResetPenAndBrush( dc ); EDA_DRAW_PANEL* panel = m_Parent->GetCanvas(); EDA_RECT tmp = *panel->GetClipBox(); // Set clip box to the max size #define MAX_VALUE (INT_MAX/2) // MAX_VALUE is the max we can use in an integer // and that allows calculations without overflow panel->SetClipBox( EDA_RECT( wxPoint( 0, 0 ), wxSize( MAX_VALUE, MAX_VALUE ) ) ); screen->m_IsPrinting = true; EDA_COLOR_T bg_color = m_Parent->GetDrawBgColor(); // Print frame reference, if requested, before printing draw layers if( m_PrintParams.m_Print_Black_and_White ) GRForceBlackPen( true ); if( m_PrintParams.PrintBorderAndTitleBlock() ) m_Parent->DrawWorkSheet( dc, screen, m_PrintParams.m_PenDefaultSize, IU_PER_MILS, titleblockFilename ); if( printMirror ) { // To plot mirror, we reverse the x axis, and modify the plot x origin dc->SetAxisOrientation( false, false ); /* Change plot offset in order to have the draw area at the same location. * The plot origin X is just moved from 0 to PlotAreaSizeInPixels.x. * just set offset x at PlotAreaSizeInPixels.x. */ int x_dc_offset = PlotAreaSizeInPixels.x; x_dc_offset = KiROUND( x_dc_offset * userscale ); dc->SetDeviceOrigin( x_dc_offset, 0 ); panel->SetClipBox( EDA_RECT( wxPoint( -MAX_VALUE / 2, -MAX_VALUE / 2 ), panel->GetClipBox()->GetSize() ) ); } // screen->m_DrawOrg = offset; dc->SetLogicalOrigin( offset.x, offset.y ); m_Parent->SetDrawBgColor( WHITE ); // Never force black pen to print draw layers // because negative objects need a white pen, not a black pen // B&W mode is handled in print page function GRForceBlackPen( false ); m_Parent->PrintPage( dc, m_PrintParams.m_PrintMaskLayer, printMirror, &m_PrintParams ); m_Parent->SetDrawBgColor( bg_color ); screen->m_IsPrinting = false; panel->SetClipBox( tmp ); }