/* generate shapes of graphic items (outlines) on layer aLayer as polygons,
* and adds these polygons to aCornerBuffer
* aCornerBuffer = the buffer to store polygons
* aInflateValue = a value to inflate shapes
* aCircleToSegmentsCount = number of segments to approximate a circle
* aCorrectionFactor = the correction to apply to the circle radius
* to generate the polygon.
* if aCorrectionFactor = 1.0, the polygon is inside the circle
* the radius of circle approximated by segments is
* initial radius * aCorrectionFactor
*/
void MODULE::TransformGraphicShapesWithClearanceToPolygonSet(
LAYER_NUM aLayer,
CPOLYGONS_LIST& aCornerBuffer,
int aInflateValue,
int aCircleToSegmentsCount,
double aCorrectionFactor )
{
std::vector<TEXTE_MODULE *> texts; // List of TEXTE_MODULE to convert
EDGE_MODULE* outline;
for( EDA_ITEM* item = GraphicalItems(); item != NULL; item = item->Next() )
{
switch( item->Type() )
{
case PCB_MODULE_TEXT_T:
if( ((TEXTE_MODULE*)item)->GetLayer() == aLayer )
texts.push_back( (TEXTE_MODULE *) item );
break;
case PCB_MODULE_EDGE_T:
outline = (EDGE_MODULE*) item;
if( outline->GetLayer() != aLayer )
break;
switch( outline->GetShape() )
{
case S_SEGMENT:
TransformRoundedEndsSegmentToPolygon( aCornerBuffer,
outline->GetStart(),
outline->GetEnd(),
aCircleToSegmentsCount,
outline->GetWidth() );
break;
case S_CIRCLE:
TransformRingToPolygon( aCornerBuffer, outline->GetCenter(),
outline->GetRadius(), aCircleToSegmentsCount,
outline->GetWidth() );
break;
case S_ARC:
TransformArcToPolygon( aCornerBuffer,
outline->GetCenter(), outline->GetArcStart(),
outline->GetAngle(),
aCircleToSegmentsCount, outline->GetWidth() );
break;
case S_POLYGON:
// for outline shape = S_POLYGON:
// We must compute true coordinates from m_PolyPoints
// which are relative to module position and module orientation = 0
for( unsigned ii = 0; ii < outline->GetPolyPoints().size(); ii++ )
{
CPolyPt corner( outline->GetPolyPoints()[ii] );
RotatePoint( &corner.x, &corner.y, GetOrientation() );
corner.x += GetPosition().x;
corner.y += GetPosition().y;
aCornerBuffer.Append( corner );
}
aCornerBuffer.CloseLastContour();
break;
default:
DBG( printf( "Error: Shape %d not implemented!\n",
outline->GetShape() ); )
break;
}
break;
default:
break;
}
}
MODULE* PCB_EDIT_FRAME::Create_MuWaveComponent( int shape_type )
{
int oX;
D_PAD* pad;
MODULE* module;
wxString msg, cmp_name;
int pad_count = 2;
int angle = 0;
// Ref and value text size (O = use board default value.
// will be set to a value depending on the footprint size, if possible
int text_size = 0;
// Enter the size of the gap or stub
int gap_size = GetDesignSettings().GetCurrentTrackWidth();
switch( shape_type )
{
case 0:
msg = _( "Gap" );
cmp_name = wxT( "muwave_gap" );
text_size = gap_size;
break;
case 1:
msg = _( "Stub" );
cmp_name = wxT( "muwave_stub" );
text_size = gap_size;
pad_count = 2;
break;
case 2:
msg = _( "Arc Stub" );
cmp_name = wxT( "muwave_arcstub" );
pad_count = 1;
break;
default:
msg = wxT( "???" );
break;
}
wxString value = StringFromValue( g_UserUnit, gap_size );
wxTextEntryDialog dlg( this, msg, _( "Create microwave module" ), value );
if( dlg.ShowModal() != wxID_OK )
{
m_canvas->MoveCursorToCrossHair();
return NULL; // cancelled by user
}
value = dlg.GetValue();
gap_size = ValueFromString( g_UserUnit, value );
bool abort = false;
if( shape_type == 2 )
{
double fcoeff = 10.0, fval;
msg.Printf( wxT( "%3.1f" ), angle / fcoeff );
wxTextEntryDialog angledlg( this, _( "Angle in degrees:" ),
_( "Create microwave module" ), msg );
if( angledlg.ShowModal() != wxID_OK )
{
m_canvas->MoveCursorToCrossHair();
return NULL; // cancelled by user
}
msg = angledlg.GetValue();
if( !msg.ToDouble( &fval ) )
{
DisplayError( this, _( "Incorrect number, abort" ) );
abort = true;
}
angle = std::abs( KiROUND( fval * fcoeff ) );
if( angle > 1800 )
angle = 1800;
}
if( abort )
{
m_canvas->MoveCursorToCrossHair();
return NULL;
}
module = CreateMuWaveBaseFootprint( cmp_name, text_size, pad_count );
pad = module->Pads();
switch( shape_type )
{
case 0: //Gap :
oX = -( gap_size + pad->GetSize().x ) / 2;
pad->SetX0( oX );
pad->SetX( pad->GetPos0().x + pad->GetPosition().x );
pad = pad->Next();
pad->SetX0( oX + gap_size + pad->GetSize().x );
pad->SetX( pad->GetPos0().x + pad->GetPosition().x );
break;
case 1: //Stub :
pad->SetPadName( wxT( "1" ) );
pad = pad->Next();
pad->SetY0( -( gap_size + pad->GetSize().y ) / 2 );
pad->SetSize( wxSize( pad->GetSize().x, gap_size ) );
pad->SetY( pad->GetPos0().y + pad->GetPosition().y );
break;
case 2: // Arc Stub created by a polygonal approach:
{
EDGE_MODULE* edge = new EDGE_MODULE( module );
module->GraphicalItems().PushFront( edge );
edge->SetShape( S_POLYGON );
edge->SetLayer( F_Cu );
int numPoints = (angle / 50) + 3; // Note: angles are in 0.1 degrees
std::vector<wxPoint>& polyPoints = edge->GetPolyPoints();
polyPoints.reserve( numPoints );
edge->m_Start0.y = -pad->GetSize().y / 2;
polyPoints.push_back( wxPoint( 0, 0 ) );
int theta = -angle / 2;
for( int ii = 1; ii<numPoints - 1; ii++ )
{
wxPoint pt( 0, -gap_size );
RotatePoint( &pt.x, &pt.y, theta );
polyPoints.push_back( pt );
theta += 50;
if( theta > angle / 2 )
theta = angle / 2;
}
// Close the polygon:
polyPoints.push_back( polyPoints[0] );
}
break;
default:
break;
}
module->CalculateBoundingBox();
GetBoard()->m_Status_Pcb = 0;
OnModify();
return module;
}
