void DIALOG_MODEDIT_FP_BODY_ITEM_PROPERTIES::OnOkClick( wxCommandEvent& event )
/*******************************************************************/
/* Copy values in text control to the item parameters
*/
{
LAYER_NUM layer = m_LayerSelectionCtrl->GetLayerSelection();
if( IsCopperLayer( layer ) )
{
/* an edge is put on a copper layer: this it is very dangerous. a
* confirmation is requested */
if( !IsOK( NULL,
_( "The graphic item will be on a copper layer. This is very dangerous. Are you sure?" ) ) )
return;
}
m_parent->SaveCopyInUndoList( m_module, UR_MODEDIT );
m_module->SetLastEditTime();
wxString msg;
wxPoint coord;
msg = m_Center_StartXCtrl->GetValue();
coord.x = ValueFromString( g_UserUnit, msg );
msg = m_Center_StartYCtrl->GetValue();
coord.y = ValueFromString( g_UserUnit, msg );
m_item->SetStart( coord );
m_item->SetStart0( coord );
msg = m_EndX_Radius_Ctrl->GetValue();
coord.x = ValueFromString( g_UserUnit, msg );
msg = m_EndY_Ctrl->GetValue();
coord.y = ValueFromString( g_UserUnit, msg );
m_item->SetEnd( coord );
m_item->SetEnd0( coord );
msg = m_ThicknessCtrl->GetValue();
m_item->SetWidth( ValueFromString( g_UserUnit, msg ) );
msg = m_DefaultThicknessCtrl->GetValue();
int thickness = ValueFromString( g_UserUnit, msg );
m_brdSettings.m_ModuleSegmentWidth = thickness;
m_parent->SetDesignSettings( m_brdSettings );
m_item->SetLayer( layer );
if( m_item->GetShape() == S_ARC )
{
double angle;
m_Angle_Ctrl->GetValue().ToDouble( &angle );
NORMALIZE_ANGLE_360(angle);
m_item->SetAngle( angle );
}
m_parent->OnModify();
m_parent->SetMsgPanel( m_item );
Close( true );
}
bool DIALOG_MODEDIT_FP_BODY_ITEM_PROPERTIES::TransferDataFromWindow()
{
if( !DIALOG_GRAPHIC_ITEM_PROPERTIES_BASE::TransferDataFromWindow() )
return false;
LAYER_NUM layer = m_LayerSelectionCtrl->GetLayerSelection();
if( IsCopperLayer( layer ) )
{
/* an edge is put on a copper layer: this it is very dangerous. a
* confirmation is requested */
if( !IsOK( NULL,
_( "The graphic item will be on a copper layer. This is very dangerous. Are you sure?" ) ) )
return false;;
}
m_parent->SaveCopyInUndoList( m_module, UR_MODEDIT );
m_module->SetLastEditTime();
wxString msg;
wxPoint coord;
msg = m_Center_StartXCtrl->GetValue();
coord.x = ValueFromString( g_UserUnit, msg );
msg = m_Center_StartYCtrl->GetValue();
coord.y = ValueFromString( g_UserUnit, msg );
m_item->SetStart( coord );
m_item->SetStart0( coord );
msg = m_EndX_Radius_Ctrl->GetValue();
coord.x = ValueFromString( g_UserUnit, msg );
msg = m_EndY_Ctrl->GetValue();
coord.y = ValueFromString( g_UserUnit, msg );
m_item->SetEnd( coord );
m_item->SetEnd0( coord );
msg = m_ThicknessCtrl->GetValue();
m_item->SetWidth( ValueFromString( g_UserUnit, msg ) );
msg = m_DefaultThicknessCtrl->GetValue();
int thickness = ValueFromString( g_UserUnit, msg );
m_brdSettings.m_ModuleSegmentWidth = thickness;
m_parent->SetDesignSettings( m_brdSettings );
m_item->SetLayer( ToLAYER_ID( layer ) );
if( m_item->GetShape() == S_ARC )
{
m_item->SetAngle( m_AngleValue * 10.0 );
}
m_parent->OnModify();
m_parent->SetMsgPanel( m_item );
return true;
}
/** Mirror marked items, refer to a Vertical axis at position offset
* Note: because this function is used in global transform,
* if force_all is true, all items will be mirrored
*/
void MirrorMarkedItems( MODULE* module, wxPoint offset, bool force_all )
{
#define SETMIRROR( z ) (z) -= offset.x; (z) = -(z); (z) += offset.x;
wxPoint tmp;
wxSize tmpz;
if( module == NULL )
return;
for( D_PAD* pad = module->Pads(); pad; pad = pad->Next() )
{
// Skip pads not selected, i.e. not inside the block to mirror:
if( !pad->IsSelected() && !force_all )
continue;
tmp = pad->GetPosition();
SETMIRROR( tmp.x );
pad->SetPosition( tmp );
pad->SetX0( pad->GetPosition().x );
tmp = pad->GetOffset();
NEGATE( tmp.x );
pad->SetOffset( tmp );
tmpz = pad->GetDelta();
NEGATE( tmpz.x );
pad->SetDelta( tmpz );
pad->SetOrientation( 1800 - pad->GetOrientation() );
}
for( EDA_ITEM* item = module->GraphicalItems(); item; item = item->Next() )
{
// Skip items not selected, i.e. not inside the block to mirror:
if( !item->IsSelected() && !force_all )
continue;
switch( item->Type() )
{
case PCB_MODULE_EDGE_T:
{
EDGE_MODULE* em = (EDGE_MODULE*) item;
tmp = em->GetStart0();
SETMIRROR( tmp.x );
em->SetStart0( tmp );
em->SetStartX( tmp.x );
tmp = em->GetEnd0();
SETMIRROR( tmp.x );
em->SetEnd0( tmp );
em->SetEndX( tmp.x );
em->SetAngle( -em->GetAngle() );
}
break;
case PCB_MODULE_TEXT_T:
{
TEXTE_MODULE* tm = (TEXTE_MODULE*) item;
tmp = tm->GetTextPosition();
SETMIRROR( tmp.x );
tm->SetTextPosition( tmp );
tmp.y = tm->GetPos0().y;
tm->SetPos0( tmp );
}
break;
default:
break;
}
item->ClearFlags();
}
}
void MODULE::Flip( const wxPoint& aCentre )
{
TEXTE_MODULE* text;
// Move module to its final position:
wxPoint finalPos = m_Pos;
finalPos.y = aCentre.y - ( finalPos.y - aCentre.y ); /// Mirror the Y position
SetPosition( finalPos );
// Flip layer
SetLayer( FlipLayer( GetLayer() ) );
// Reverse mirror orientation.
NEGATE( m_Orient );
NORMALIZE_ANGLE_POS( m_Orient );
// Mirror pads to other side of board about the x axis, i.e. vertically.
for( D_PAD* pad = m_Pads; pad; pad = pad->Next() )
pad->Flip( m_Pos );
// Mirror reference.
text = m_Reference;
text->m_Pos.y -= m_Pos.y;
NEGATE( text->m_Pos.y );
text->m_Pos.y += m_Pos.y;
NEGATE(text->m_Pos0.y);
NEGATE_AND_NORMALIZE_ANGLE_POS( text->m_Orient );
text->SetLayer( FlipLayer( text->GetLayer() ) );
text->m_Mirror = IsBackLayer( GetLayer() );
// Mirror value.
text = m_Value;
text->m_Pos.y -= m_Pos.y;
NEGATE( text->m_Pos.y );
text->m_Pos.y += m_Pos.y;
NEGATE( text->m_Pos0.y );
NEGATE_AND_NORMALIZE_ANGLE_POS( text->m_Orient );
text->SetLayer( FlipLayer( text->GetLayer() ) );
text->m_Mirror = IsBackLayer( GetLayer() );
// Reverse mirror module graphics and texts.
for( EDA_ITEM* item = m_Drawings; item; item = item->Next() )
{
switch( item->Type() )
{
case PCB_MODULE_EDGE_T:
{
EDGE_MODULE* em = (EDGE_MODULE*) item;
wxPoint s = em->GetStart();
s.y -= m_Pos.y;
s.y = -s.y;
s.y += m_Pos.y;
em->SetStart( s );
wxPoint e = em->GetEnd();
e.y -= m_Pos.y;
e.y = -e.y;
e.y += m_Pos.y;
em->SetEnd( e );
NEGATE( em->m_Start0.y );
NEGATE( em->m_End0.y );
if( em->GetShape() == S_ARC )
{
em->SetAngle( -em->GetAngle() );
}
em->SetLayer( FlipLayer( em->GetLayer() ) );
}
break;
case PCB_MODULE_TEXT_T:
text = (TEXTE_MODULE*) item;
text->m_Pos.y -= m_Pos.y;
NEGATE( text->m_Pos.y );
text->m_Pos.y += m_Pos.y;
NEGATE( text->m_Pos0.y );
NEGATE_AND_NORMALIZE_ANGLE_POS( text->m_Orient );
text->SetLayer( FlipLayer( text->GetLayer() ) );
text->m_Mirror = IsBackLayer( GetLayer() );
break;
default:
wxMessageBox( wxT( "MODULE::Flip() error: Unknown Draw Type" ) );
break;
}
}
CalculateBoundingBox();
}
int DRAWING_TOOL::PlaceDXF( const TOOL_EVENT& aEvent )
{
if( !m_frame->GetModel() )
return 0;
DIALOG_DXF_IMPORT dlg( m_frame );
int dlgResult = dlg.ShowModal();
const std::list<BOARD_ITEM*>& list = dlg.GetImportedItems();
if( dlgResult != wxID_OK || list.empty() )
return 0;
VECTOR2I cursorPos = m_controls->GetCursorPosition();
VECTOR2I delta = cursorPos - list.front()->GetPosition();
// Add a VIEW_GROUP that serves as a preview for the new item
SELECTION preview( m_view );
BOARD_COMMIT commit( m_frame );
// Build the undo list & add items to the current view
for( auto item : list )
{
assert( item->Type() == PCB_LINE_T || item->Type() == PCB_TEXT_T );
preview.Add( item );
}
BOARD_ITEM* firstItem = preview.Front();
m_view->Add( &preview );
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
m_controls->ShowCursor( true );
m_controls->SetSnapping( true );
SCOPED_DRAW_MODE scopedDrawMode( m_mode, MODE::DXF );
Activate();
// Main loop: keep receiving events
while( OPT_TOOL_EVENT evt = Wait() )
{
cursorPos = m_controls->GetCursorPosition();
if( evt->IsMotion() )
{
delta = cursorPos - firstItem->GetPosition();
for( auto item : preview )
item->Move( wxPoint( delta.x, delta.y ) );
m_view->Update( &preview );
}
else if( evt->Category() == TC_COMMAND )
{
// TODO it should be handled by EDIT_TOOL, so add items and select?
if( evt->IsAction( &COMMON_ACTIONS::rotate ) )
{
for( auto item : preview )
item->Rotate( wxPoint( cursorPos.x, cursorPos.y ),
m_frame->GetRotationAngle() );
m_view->Update( &preview );
}
else if( evt->IsAction( &COMMON_ACTIONS::flip ) )
{
for( auto item : preview )
item->Flip( wxPoint( cursorPos.x, cursorPos.y ) );
m_view->Update( &preview );
}
else if( evt->IsCancel() || evt->IsActivate() )
{
preview.FreeItems();
break;
}
}
else if ( evt->IsClick( BUT_RIGHT ) )
{
showContextMenu();
}
else if( evt->IsClick( BUT_LEFT ) )
{
// Place the drawing
BOARD_ITEM_CONTAINER* parent = m_frame->GetModel();
for( auto item : preview )
{
if( m_editModules )
{
// Modules use different types for the same things,
// so we need to convert imported items to appropriate classes.
BOARD_ITEM* converted = NULL;
switch( item->Type() )
{
case PCB_TEXT_T:
{
TEXTE_PCB* text = static_cast<TEXTE_PCB*>( item );
TEXTE_MODULE* textMod = new TEXTE_MODULE( (MODULE*) parent );
// Assignment operator also copies the item PCB_TEXT_T type,
// so it cannot be added to a module which handles PCB_MODULE_TEXT_T
textMod->SetPosition( text->GetPosition() );
textMod->SetText( text->GetText() );
textMod->SetSize( text->GetSize() );
textMod->SetThickness( text->GetThickness() );
textMod->SetOrientation( text->GetOrientation() );
textMod->SetTextPosition( text->GetTextPosition() );
textMod->SetSize( text->GetSize() );
textMod->SetMirrored( text->IsMirrored() );
textMod->SetAttributes( text->GetAttributes() );
textMod->SetItalic( text->IsItalic() );
textMod->SetBold( text->IsBold() );
textMod->SetHorizJustify( text->GetHorizJustify() );
textMod->SetVertJustify( text->GetVertJustify() );
textMod->SetMultilineAllowed( text->IsMultilineAllowed() );
converted = textMod;
break;
}
case PCB_LINE_T:
{
DRAWSEGMENT* seg = static_cast<DRAWSEGMENT*>( item );
EDGE_MODULE* modSeg = new EDGE_MODULE( (MODULE*) parent );
// Assignment operator also copies the item PCB_LINE_T type,
// so it cannot be added to a module which handles PCB_MODULE_EDGE_T
modSeg->SetWidth( seg->GetWidth() );
modSeg->SetStart( seg->GetStart() );
modSeg->SetEnd( seg->GetEnd() );
modSeg->SetAngle( seg->GetAngle() );
modSeg->SetShape( seg->GetShape() );
modSeg->SetType( seg->GetType() );
modSeg->SetBezControl1( seg->GetBezControl1() );
modSeg->SetBezControl2( seg->GetBezControl2() );
modSeg->SetBezierPoints( seg->GetBezierPoints() );
modSeg->SetPolyPoints( seg->GetPolyPoints() );
converted = modSeg;
break;
}
default:
assert( false );
break;
}
if( converted )
converted->SetLayer( item->GetLayer() );
delete item;
item = converted;
}
if( item )
commit.Add( item );
}
commit.Push( _( "Place a DXF drawing" ) );
break;
}
}
preview.Clear();
m_controls->ShowCursor( false );
m_controls->SetSnapping( false );
m_controls->SetAutoPan( false );
m_controls->CaptureCursor( false );
m_view->Remove( &preview );
return 0;
}
MODULE* GPCB_FPL_CACHE::parseMODULE( LINE_READER* aLineReader ) throw( IO_ERROR, PARSE_ERROR )
{
#define TEXT_DEFAULT_SIZE ( 40*IU_PER_MILS )
#define OLD_GPCB_UNIT_CONV IU_PER_MILS
// Old version unit = 1 mil, so conv_unit is 10 or 0.1
#define NEW_GPCB_UNIT_CONV ( 0.01*IU_PER_MILS )
int paramCnt;
double conv_unit = NEW_GPCB_UNIT_CONV; // GPCB unit = 0.01 mils and Pcbnew 0.1
wxPoint textPos;
wxString msg;
wxArrayString parameters;
std::auto_ptr<MODULE> module( new MODULE( NULL ) );
if( aLineReader->ReadLine() == NULL )
THROW_IO_ERROR( "unexpected end of file" );
parameters.Clear();
parseParameters( parameters, aLineReader );
paramCnt = parameters.GetCount();
/* From the Geda PCB documentation, valid Element definitions:
* Element [SFlags "Desc" "Name" "Value" MX MY TX TY TDir TScale TSFlags]
* Element (NFlags "Desc" "Name" "Value" MX MY TX TY TDir TScale TNFlags)
* Element (NFlags "Desc" "Name" "Value" TX TY TDir TScale TNFlags)
* Element (NFlags "Desc" "Name" TX TY TDir TScale TNFlags)
* Element ("Desc" "Name" TX TY TDir TScale TNFlags)
*/
if( parameters[0].CmpNoCase( wxT( "Element" ) ) != 0 )
{
msg.Printf( _( "unknown token \"%s\"" ), GetChars( parameters[0] ) );
THROW_PARSE_ERROR( msg, aLineReader->GetSource(), (const char *)aLineReader,
aLineReader->LineNumber(), 0 );
}
if( paramCnt < 10 || paramCnt > 14 )
{
msg.Printf( _( "Element token contains %d parameters." ), paramCnt );
THROW_PARSE_ERROR( msg, aLineReader->GetSource(), (const char *)aLineReader,
aLineReader->LineNumber(), 0 );
}
// Test symbol after "Element": if [ units = 0.01 mils, and if ( units = 1 mil
if( parameters[1] == wxT( "(" ) )
conv_unit = OLD_GPCB_UNIT_CONV;
if( paramCnt > 10 )
{
module->SetDescription( parameters[3] );
module->SetReference( parameters[4] );
}
else
{
module->SetDescription( parameters[2] );
module->SetReference( parameters[3] );
}
// Read value
if( paramCnt > 10 )
module->SetValue( parameters[5] );
// With gEDA/pcb, value is meaningful after instantiation, only, so it's
// often empty in bare footprints.
if( module->Value().GetText().IsEmpty() )
module->Value().SetText( wxT( "Val**" ) );
if( paramCnt == 14 )
{
textPos = wxPoint( parseInt( parameters[8], conv_unit ),
parseInt( parameters[9], conv_unit ) );
}
else
{
textPos = wxPoint( parseInt( parameters[6], conv_unit ),
parseInt( parameters[7], conv_unit ) );
}
int orientation = parseInt( parameters[paramCnt-4], 1.0 );
module->Reference().SetOrientation( (orientation % 2) ? 900 : 0 );
// Calculate size: default height is 40 mils, width 30 mil.
// real size is: default * ibuf[idx+3] / 100 (size in gpcb is given in percent of default size
int thsize = parseInt( parameters[paramCnt-3], TEXT_DEFAULT_SIZE ) / 100;
thsize = std::max( (int)( 5 * IU_PER_MILS ), thsize ); // Ensure a minimal size = 5 mils
int twsize = thsize * 30 / 40;
int thickness = thsize / 8;
// gEDA/pcb aligns top/left, not pcbnew's default, center/center.
// Compensate for this by shifting the insertion point instead of the
// aligment, because alignment isn't changeable in the GUI.
textPos.x = textPos.x + twsize * module->GetReference().Len() / 2;
textPos.y += thsize / 2;
// gEDA/pcb draws a bit too low/left, while pcbnew draws a bit too
// high/right. Compensate for similar appearance.
textPos.x -= thsize / 10;
textPos.y += thsize / 2;
module->Reference().SetTextPosition( textPos );
module->Reference().SetPos0( textPos );
module->Reference().SetSize( wxSize( twsize, thsize ) );
module->Reference().SetThickness( thickness );
// gEDA/pcb shows only one of value/reference/description at a time. Which
// one is selectable by a global menu setting. pcbnew needs reference as
// well as value visible, so place the value right below the reference.
module->Value().SetOrientation( module->Reference().GetOrientation() );
module->Value().SetSize( module->Reference().GetSize() );
module->Value().SetThickness( module->Reference().GetThickness() );
textPos.y += thsize * 13 / 10; // 130% line height
module->Value().SetTextPosition( textPos );
module->Value().SetPos0( textPos );
while( aLineReader->ReadLine() )
{
parameters.Clear();
parseParameters( parameters, aLineReader );
if( parameters.IsEmpty() || parameters[0] == wxT( "(" ) )
continue;
if( parameters[0] == wxT( ")" ) )
break;
paramCnt = parameters.GetCount();
// Test units value for a string line param (more than 3 parameters : ident [ xx ] )
if( paramCnt > 3 )
{
if( parameters[1] == wxT( "(" ) )
conv_unit = OLD_GPCB_UNIT_CONV;
else
conv_unit = NEW_GPCB_UNIT_CONV;
}
wxLogTrace( traceFootprintLibrary, wxT( "%s parameter count = %d." ),
GetChars( parameters[0] ), paramCnt );
// Parse a line with format: ElementLine [X1 Y1 X2 Y2 Thickness]
if( parameters[0].CmpNoCase( wxT( "ElementLine" ) ) == 0 )
{
if( paramCnt != 8 )
{
msg.Printf( wxT( "ElementLine token contains %d parameters." ), paramCnt );
THROW_PARSE_ERROR( msg, aLineReader->GetSource(), (const char *)aLineReader,
aLineReader->LineNumber(), 0 );
}
EDGE_MODULE* drawSeg = new EDGE_MODULE( module.get() );
drawSeg->SetLayer( F_SilkS );
drawSeg->SetShape( S_SEGMENT );
drawSeg->SetStart0( wxPoint( parseInt( parameters[2], conv_unit ),
parseInt( parameters[3], conv_unit ) ) );
drawSeg->SetEnd0( wxPoint( parseInt( parameters[4], conv_unit ),
parseInt( parameters[5], conv_unit ) ) );
drawSeg->SetWidth( parseInt( parameters[6], conv_unit ) );
drawSeg->SetDrawCoord();
module->GraphicalItems().PushBack( drawSeg );
continue;
}
// Parse an arc with format: ElementArc [X Y Width Height StartAngle DeltaAngle Thickness]
if( parameters[0].CmpNoCase( wxT( "ElementArc" ) ) == 0 )
{
if( paramCnt != 10 )
{
msg.Printf( wxT( "ElementArc token contains %d parameters." ), paramCnt );
THROW_PARSE_ERROR( msg, aLineReader->GetSource(), (const char *)aLineReader,
aLineReader->LineNumber(), 0 );
}
// Pcbnew does know ellipse so we must have Width = Height
EDGE_MODULE* drawSeg = new EDGE_MODULE( module.get() );
drawSeg->SetLayer( F_SilkS );
drawSeg->SetShape( S_ARC );
module->GraphicalItems().PushBack( drawSeg );
// for and arc: ibuf[3] = ibuf[4]. Pcbnew does not know ellipses
int radius = ( parseInt( parameters[4], conv_unit ) +
parseInt( parameters[5], conv_unit ) ) / 2;
wxPoint centre( parseInt( parameters[2], conv_unit ),
parseInt( parameters[3], conv_unit ) );
drawSeg->SetStart0( centre );
// Pcbnew start angles are inverted and 180 degrees from Geda PCB angles.
double start_angle = parseInt( parameters[6], -10.0 ) + 1800.0;
// Pcbnew delta angle direction is the opposite of Geda PCB delta angles.
double sweep_angle = parseInt( parameters[7], -10.0 );
// Geda PCB does not support circles.
if( sweep_angle == -3600.0 )
drawSeg->SetShape( S_CIRCLE );
// Angle value is clockwise in gpcb and Pcbnew.
drawSeg->SetAngle( sweep_angle );
drawSeg->SetEnd0( wxPoint( radius, 0 ) );
// Calculate start point coordinate of arc
wxPoint arcStart( drawSeg->GetEnd0() );
RotatePoint( &arcStart, -start_angle );
drawSeg->SetEnd0( centre + arcStart );
drawSeg->SetWidth( parseInt( parameters[8], conv_unit ) );
drawSeg->SetDrawCoord();
continue;
}
// Parse a Pad with no hole with format:
// Pad [rX1 rY1 rX2 rY2 Thickness Clearance Mask "Name" "Number" SFlags]
// Pad (rX1 rY1 rX2 rY2 Thickness Clearance Mask "Name" "Number" NFlags)
// Pad (aX1 aY1 aX2 aY2 Thickness "Name" "Number" NFlags)
// Pad (aX1 aY1 aX2 aY2 Thickness "Name" NFlags)
if( parameters[0].CmpNoCase( wxT( "Pad" ) ) == 0 )
{
if( paramCnt < 10 || paramCnt > 13 )
{
msg.Printf( wxT( "Pad token contains %d parameters." ), paramCnt );
THROW_PARSE_ERROR( msg, aLineReader->GetSource(), (const char *)aLineReader,
aLineReader->LineNumber(), 0 );
}
D_PAD* pad = new D_PAD( module.get() );
static const LSET pad_front( 3, F_Cu, F_Mask, F_Paste );
static const LSET pad_back( 3, B_Cu, B_Mask, B_Paste );
pad->SetShape( PAD_SHAPE_RECT );
pad->SetAttribute( PAD_ATTRIB_SMD );
pad->SetLayerSet( pad_front );
if( testFlags( parameters[paramCnt-2], 0x0080, wxT( "onsolder" ) ) )
pad->SetLayerSet( pad_back );
// Set the pad name:
// Pcbnew pad name is used for electrical connection calculations.
// Accordingly it should be mapped to gEDA's pin/pad number,
// which is used for the same purpose.
// gEDA also features a pin/pad "name", which is an arbitrary string
// and set to the pin name of the netlist on instantiation. Many gEDA
// bare footprints use identical strings for name and number, so this
// can be a bit confusing.
pad->SetPadName( parameters[paramCnt-3] );
int x1 = parseInt( parameters[2], conv_unit );
int x2 = parseInt( parameters[4], conv_unit );
int y1 = parseInt( parameters[3], conv_unit );
int y2 = parseInt( parameters[5], conv_unit );
int width = parseInt( parameters[6], conv_unit );
wxPoint delta( x2 - x1, y2 - y1 );
double angle = atan2( (double)delta.y, (double)delta.x );
// Get the pad clearance and the solder mask clearance.
if( paramCnt == 13 )
{
int clearance = parseInt( parameters[7], conv_unit );
// One of gEDA's oddities is that clearance between pad and polygon
// is given as the gap on both sides of the pad together, so for
// KiCad it has to halfed.
pad->SetLocalClearance( clearance / 2 );
// In GEDA, the mask value is the size of the hole in this
// solder mask. In Pcbnew, it is a margin, therefore the distance
// between the copper and the mask
int maskMargin = parseInt( parameters[8], conv_unit );
maskMargin = ( maskMargin - width ) / 2;
pad->SetLocalSolderMaskMargin( maskMargin );
}
// Negate angle (due to Y reversed axis) and convert it to internal units
angle = - RAD2DECIDEG( angle );
pad->SetOrientation( KiROUND( angle ) );
wxPoint padPos( (x1 + x2) / 2, (y1 + y2) / 2 );
pad->SetSize( wxSize( KiROUND( EuclideanNorm( delta ) ) + width,
width ) );
padPos += module->GetPosition();
pad->SetPos0( padPos );
pad->SetPosition( padPos );
if( !testFlags( parameters[paramCnt-2], 0x0100, wxT( "square" ) ) )
{
if( pad->GetSize().x == pad->GetSize().y )
pad->SetShape( PAD_SHAPE_CIRCLE );
else
pad->SetShape( PAD_SHAPE_OVAL );
}
module->Add( pad );
continue;
}
// Parse a Pin with through hole with format:
// Pin [rX rY Thickness Clearance Mask Drill "Name" "Number" SFlags]
// Pin (rX rY Thickness Clearance Mask Drill "Name" "Number" NFlags)
// Pin (aX aY Thickness Drill "Name" "Number" NFlags)
// Pin (aX aY Thickness Drill "Name" NFlags)
// Pin (aX aY Thickness "Name" NFlags)
if( parameters[0].CmpNoCase( wxT( "Pin" ) ) == 0 )
{
if( paramCnt < 8 || paramCnt > 12 )
{
msg.Printf( wxT( "Pin token contains %d parameters." ), paramCnt );
THROW_PARSE_ERROR( msg, aLineReader->GetSource(), (const char *)aLineReader,
aLineReader->LineNumber(), 0 );
}
D_PAD* pad = new D_PAD( module.get() );
pad->SetShape( PAD_SHAPE_CIRCLE );
static const LSET pad_set = LSET::AllCuMask() | LSET( 3, F_SilkS, F_Mask, B_Mask );
pad->SetLayerSet( pad_set );
if( testFlags( parameters[paramCnt-2], 0x0100, wxT( "square" ) ) )
pad->SetShape( PAD_SHAPE_RECT );
// Set the pad name:
// Pcbnew pad name is used for electrical connection calculations.
// Accordingly it should be mapped to gEDA's pin/pad number,
// which is used for the same purpose.
pad->SetPadName( parameters[paramCnt-3] );
wxPoint padPos( parseInt( parameters[2], conv_unit ),
parseInt( parameters[3], conv_unit ) );
int padSize = parseInt( parameters[4], conv_unit );
pad->SetSize( wxSize( padSize, padSize ) );
int drillSize = 0;
// Get the pad clearance, solder mask clearance, and drill size.
if( paramCnt == 12 )
{
int clearance = parseInt( parameters[5], conv_unit );
// One of gEDA's oddities is that clearance between pad and polygon
// is given as the gap on both sides of the pad together, so for
// KiCad it has to halfed.
pad->SetLocalClearance( clearance / 2 );
// In GEDA, the mask value is the size of the hole in this
// solder mask. In Pcbnew, it is a margin, therefore the distance
// between the copper and the mask
int maskMargin = parseInt( parameters[6], conv_unit );
maskMargin = ( maskMargin - padSize ) / 2;
pad->SetLocalSolderMaskMargin( maskMargin );
drillSize = parseInt( parameters[7], conv_unit );
}
else
{
drillSize = parseInt( parameters[5], conv_unit );
}
pad->SetDrillSize( wxSize( drillSize, drillSize ) );
padPos += module->GetPosition();
pad->SetPos0( padPos );
pad->SetPosition( padPos );
if( pad->GetShape() == PAD_SHAPE_CIRCLE && pad->GetSize().x != pad->GetSize().y )
pad->SetShape( PAD_SHAPE_OVAL );
module->Add( pad );
continue;
}
}
// Recalculate the bounding box
module->CalculateBoundingBox();
return module.release();
}