GlfSimpleLight
HdStLight::_ApproximateAreaLight(SdfPath const &id,
HdSceneDelegate *sceneDelegate)
{
// Get the color of the light
GfVec3f hdc = sceneDelegate->GetLightParamValue(id, HdStLightTokens->color)
.Get<GfVec3f>();
// Extract intensity
float intensity =
sceneDelegate->GetLightParamValue(id, HdLightTokens->intensity)
.Get<float>();
// Extract the exposure of the light
float exposure =
sceneDelegate->GetLightParamValue(id, HdLightTokens->exposure)
.Get<float>();
intensity *= powf(2.0f, GfClamp(exposure, -50.0f, 50.0f));
// Calculate the final color of the light
GfVec4f c(hdc[0]*intensity, hdc[1]*intensity, hdc[2]*intensity, 1.0f);
// Get the transform of the light
GfMatrix4d transform = _params[HdTokens->transform].Get<GfMatrix4d>();
GfVec3d hdp = transform.ExtractTranslation();
GfVec4f p = GfVec4f(hdp[0], hdp[1], hdp[2], 1.0f);
// Create the Glf Simple Light object that will be used by the rest
// of the pipeline. No support for shadows for this translated light.
GlfSimpleLight l;
l.SetPosition(p);
l.SetDiffuse(c);
l.SetHasShadow(false);
return l;
}
GfMatrix4d
GfFrustum::ComputeViewMatrix() const
{
GfMatrix4d m;
m.SetLookAt(_position, _rotation);
return m;
}
vector<GfVec3d>
GfFrustum::ComputeCornersAtDistance(double d) const
{
const GfVec2d &winMin = _window.GetMin();
const GfVec2d &winMax = _window.GetMax();
vector<GfVec3d> corners;
corners.reserve(4);
if (_projectionType == Perspective) {
// Similar to ComputeCorners
corners.push_back(GfVec3d(d * winMin[0], d * winMin[1], -d));
corners.push_back(GfVec3d(d * winMax[0], d * winMin[1], -d));
corners.push_back(GfVec3d(d * winMin[0], d * winMax[1], -d));
corners.push_back(GfVec3d(d * winMax[0], d * winMax[1], -d));
}
else {
corners.push_back(GfVec3d(winMin[0], winMin[1], -d));
corners.push_back(GfVec3d(winMax[0], winMin[1], -d));
corners.push_back(GfVec3d(winMin[0], winMax[1], -d));
corners.push_back(GfVec3d(winMax[0], winMax[1], -d));
}
// Each corner is then transformed into world space by the inverse
// of the view matrix.
const GfMatrix4d m = ComputeViewInverse();
for (int i = 0; i < 4; i++)
corners[i] = m.Transform(corners[i]);
return corners;
}
GfMatrix4d
Hdx_UnitTestGLDrawing::GetViewMatrix() const
{
GfMatrix4d viewMatrix;
viewMatrix.SetIdentity();
// rotate from z-up to y-up
viewMatrix *= GfMatrix4d().SetRotate(GfRotation(GfVec3d(1.0,0.0,0.0), -90.0));
viewMatrix *= GfMatrix4d().SetRotate(GfRotation(GfVec3d(0, 1, 0), _rotate[1]));
viewMatrix *= GfMatrix4d().SetRotate(GfRotation(GfVec3d(1, 0, 0), _rotate[0]));
viewMatrix *= GfMatrix4d().SetTranslate(GfVec3d(_translate[0], _translate[1], _translate[2]));
return viewMatrix;
}
vector<GfVec3d>
GfFrustum::ComputeCorners() const
{
const GfVec2d &winMin = _window.GetMin();
const GfVec2d &winMax = _window.GetMax();
double near = _nearFar.GetMin();
double far = _nearFar.GetMax();
vector<GfVec3d> corners;
corners.reserve(8);
if (_projectionType == Perspective) {
// Compute the eye-space corners of the near-plane and
// far-plane frustum rectangles using similar triangles. The
// reference plane in which the window rectangle is defined is
// a distance of 1 from the eyepoint. By similar triangles,
// just multiply the window points by near and far to get the
// near and far rectangles.
// XXX Note: If we ever allow reference plane depth to be other
// than 1.0, we'll need to revisit this.
corners.push_back(GfVec3d(near * winMin[0], near * winMin[1], -near));
corners.push_back(GfVec3d(near * winMax[0], near * winMin[1], -near));
corners.push_back(GfVec3d(near * winMin[0], near * winMax[1], -near));
corners.push_back(GfVec3d(near * winMax[0], near * winMax[1], -near));
corners.push_back(GfVec3d(far * winMin[0], far * winMin[1], -far));
corners.push_back(GfVec3d(far * winMax[0], far * winMin[1], -far));
corners.push_back(GfVec3d(far * winMin[0], far * winMax[1], -far));
corners.push_back(GfVec3d(far * winMax[0], far * winMax[1], -far));
}
else {
// Just use the reference plane rectangle as is, translated to
// the near and far planes.
corners.push_back(GfVec3d(winMin[0], winMin[1], -near));
corners.push_back(GfVec3d(winMax[0], winMin[1], -near));
corners.push_back(GfVec3d(winMin[0], winMax[1], -near));
corners.push_back(GfVec3d(winMax[0], winMax[1], -near));
corners.push_back(GfVec3d(winMin[0], winMin[1], -far));
corners.push_back(GfVec3d(winMax[0], winMin[1], -far));
corners.push_back(GfVec3d(winMin[0], winMax[1], -far));
corners.push_back(GfVec3d(winMax[0], winMax[1], -far));
}
// Each corner is then transformed into world space by the inverse
// of the view matrix.
GfMatrix4d m = ComputeViewInverse();
for (int i = 0; i < 8; i++)
corners[i] = m.Transform(corners[i]);
return corners;
}
GfMatrix4d
GfFrustum::ComputeProjectionMatrix() const
{
// Build the projection matrix per Section 2.11 of
// The OpenGL Specification: Coordinate Transforms.
GfMatrix4d matrix;
matrix.SetIdentity();
const double l = _window.GetMin()[0];
const double r = _window.GetMax()[0];
const double b = _window.GetMin()[1];
const double t = _window.GetMax()[1];
const double n = _nearFar.GetMin();
const double f = _nearFar.GetMax();
const double rl = r - l;
const double tb = t - b;
const double fn = f - n;
if (_projectionType == GfFrustum::Orthographic) {
matrix[0][0] = 2.0 / rl;
matrix[1][1] = 2.0 / tb;
matrix[2][2] = -2.0 / fn;
matrix[3][0] = -(r + l) / rl;
matrix[3][1] = -(t + b) / tb;
matrix[3][2] = -(f + n) / fn;
}
else {
// Perspective:
// The window coordinates are specified with respect to the
// reference plane (near == 1).
// XXX Note: If we ever allow reference plane depth to be other
// than 1.0, we'll need to revisit this.
matrix[0][0] = 2.0 / rl;
matrix[1][1] = 2.0 / tb;
matrix[2][2] = -(f + n) / fn;
matrix[2][0] = (r + l) / rl;
matrix[2][1] = (t + b) / tb;
matrix[3][2] = -2.0 * n * f / fn;
matrix[2][3] = -1.0;
matrix[3][3] = 0.0;
}
return matrix;
}
/* virtual */
void
HdSt_TestLightingShader::SetCamera(GfMatrix4d const &worldToViewMatrix,
GfMatrix4d const &projectionMatrix)
{
for (int i = 0; i < 2; ++i) {
_lights[i].eyeDir
= worldToViewMatrix.TransformDir(_lights[i].dir).GetNormalized();
}
}
void
GfFrustum::SetPositionAndRotationFromMatrix(
const GfMatrix4d &camToWorldXf)
{
// First conform matrix to be...
GfMatrix4d conformedXf = camToWorldXf;
// ... right handed
if (!conformedXf.IsRightHanded()) {
static GfMatrix4d flip(GfVec4d(-1.0, 1.0, 1.0, 1.0));
conformedXf = flip * conformedXf;
}
// ... and orthonormal
conformedXf.Orthonormalize();
SetRotation(conformedXf.ExtractRotation());
SetPosition(conformedXf.ExtractTranslation());
}
// Assumes rotationOrder is XYZ.
static void
_RotMatToRotXYZ(
const GfMatrix4d &rotMat,
GfVec3f *rotXYZ)
{
GfRotation rot = rotMat.ExtractRotation();
GfVec3d angles = rot.Decompose(GfVec3d::ZAxis(),
GfVec3d::YAxis(),
GfVec3d::XAxis());
*rotXYZ = GfVec3f(angles[2], angles[1], angles[0]);
}
GfPlane &
GfPlane::Transform(const GfMatrix4d &matrix)
{
// Compute the point on the plane along the normal from the origin.
GfVec3d pointOnPlane = _distance * _normal;
// Transform the plane normal by the adjoint of the matrix to get
// the new normal. The adjoint (inverse transpose) is used to
// multiply normals so they are not scaled incorrectly.
GfMatrix4d adjoint = matrix.GetInverse().GetTranspose();
_normal = adjoint.TransformDir(_normal).GetNormalized();
// Transform the point on the plane by the matrix.
pointOnPlane = matrix.Transform(pointOnPlane);
// The new distance is the projected distance of the vector to the
// transformed point onto the (unit) transformed normal. This is
// just a dot product.
_distance = GfDot(pointOnPlane, _normal);
return *this;
}
// Assumes rotationOrder is XYZ.
static void
_RotMatToRotTriplet(
const GfMatrix4d &rotMat,
GfVec3d *rotTriplet)
{
GfRotation rot = rotMat.ExtractRotation();
GfVec3d angles = rot.Decompose(GfVec3d::ZAxis(),
GfVec3d::YAxis(),
GfVec3d::XAxis());
(*rotTriplet)[0] = angles[2];
(*rotTriplet)[1] = angles[1];
(*rotTriplet)[2] = angles[0];
}
static void
_MatrixToVectorsWithPivotInvariant(
const GfMatrix4d &m,
const GfVec3d pivotPosition,
const GfVec3d pivotOrientation,
GfVec3d *translation,
GfVec3d *rotation,
GfVec3d *scale,
GfVec3d *scaleOrientation)
{
GfMatrix3d pivotOrientMat = _EulerXYZToMatrix3d(pivotOrientation);
GfMatrix4d pp = GfMatrix4d(1.0).SetTranslate( pivotPosition);
GfMatrix4d ppInv = GfMatrix4d(1.0).SetTranslate(-pivotPosition);
GfMatrix4d po = GfMatrix4d(1.0).SetRotate(pivotOrientMat);
GfMatrix4d poInv = GfMatrix4d(1.0).SetRotate(pivotOrientMat.GetInverse());
GfMatrix4d factorMe = po * pp * m * ppInv;
GfMatrix4d scaleOrientMat, factoredRotMat, perspMat;
factorMe.Factor(&scaleOrientMat, scale, &factoredRotMat,
translation, &perspMat);
GfMatrix4d rotMat = factoredRotMat * poInv;
if(not rotMat.Orthonormalize(/* issueWarning */ false))
TF_WARN("Failed to orthonormalize rotMat.");
_RotMatToRotTriplet(rotMat, rotation);
if(not scaleOrientMat.Orthonormalize(/* issueWarning */ false))
TF_WARN("Failed to orthonormalize scaleOrientMat.");
_RotMatToRotTriplet(scaleOrientMat, scaleOrientation);
}
static
bool
_IsMatrixIdentity(const GfMatrix4d& matrix)
{
const GfMatrix4d IDENTITY(1.0);
const double TOLERANCE = 1e-6;
if (GfIsClose(matrix.GetRow(0), IDENTITY.GetRow(0), TOLERANCE) &&
GfIsClose(matrix.GetRow(1), IDENTITY.GetRow(1), TOLERANCE) &&
GfIsClose(matrix.GetRow(2), IDENTITY.GetRow(2), TOLERANCE) &&
GfIsClose(matrix.GetRow(3), IDENTITY.GetRow(3), TOLERANCE)) {
return true;
}
return false;
}
static void
_ConvertMatrixToComponents(const GfMatrix4d &matrix,
GfVec3d *translation,
GfVec3f *rotation,
GfVec3f *scale)
{
GfMatrix4d rotMat(1.0);
GfVec3d doubleScale(1.0);
GfMatrix4d scaleOrientMatUnused, perspMatUnused;
matrix.Factor(&scaleOrientMatUnused, &doubleScale, &rotMat,
translation, &perspMatUnused);
*scale = GfVec3f(doubleScale[0], doubleScale[1], doubleScale[2]);
if (!rotMat.Orthonormalize(/* issueWarning */ false))
TF_WARN("Failed to orthonormalize rotation matrix.");
_RotMatToRotXYZ(rotMat, rotation);
}
void
PxrUsdKatanaReadPointInstancer(
const UsdGeomPointInstancer& instancer,
const PxrUsdKatanaUsdInPrivateData& data,
PxrUsdKatanaAttrMap& instancerAttrMap,
PxrUsdKatanaAttrMap& sourcesAttrMap,
PxrUsdKatanaAttrMap& instancesAttrMap,
PxrUsdKatanaAttrMap& inputAttrMap)
{
const double currentTime = data.GetCurrentTime();
PxrUsdKatanaReadXformable(instancer, data, instancerAttrMap);
// Get primvars for setting later. Unfortunatley, the only way to get them
// out of the attr map is to build it, which will cause its contents to be
// cleared. We'll need to restore its contents before continuing.
//
FnKat::GroupAttribute instancerAttrs = instancerAttrMap.build();
FnKat::GroupAttribute primvarAttrs =
instancerAttrs.getChildByName("geometry.arbitrary");
for (int64_t i = 0; i < instancerAttrs.getNumberOfChildren(); ++i)
{
instancerAttrMap.set(instancerAttrs.getChildName(i),
instancerAttrs.getChildByIndex(i));
}
instancerAttrMap.set("type", FnKat::StringAttribute("usd point instancer"));
const std::string fileName = data.GetUsdInArgs()->GetFileName();
instancerAttrMap.set("info.usd.fileName", FnKat::StringAttribute(fileName));
FnKat::GroupAttribute inputAttrs = inputAttrMap.build();
const std::string katOutputPath = FnKat::StringAttribute(
inputAttrs.getChildByName("outputLocationPath")).getValue("", false);
if (katOutputPath.empty())
{
_LogAndSetError(instancerAttrMap, "No output location path specified");
return;
}
//
// Validate instancer data.
//
const std::string instancerPath = instancer.GetPath().GetString();
UsdStageWeakPtr stage = instancer.GetPrim().GetStage();
// Prototypes (required)
//
SdfPathVector protoPaths;
instancer.GetPrototypesRel().GetTargets(&protoPaths);
if (protoPaths.empty())
{
_LogAndSetError(instancerAttrMap, "Instancer has no prototypes");
return;
}
_PathToPrimMap primCache;
for (auto protoPath : protoPaths) {
const UsdPrim &protoPrim = stage->GetPrimAtPath(protoPath);
primCache[protoPath] = protoPrim;
}
// Indices (required)
//
VtIntArray protoIndices;
if (!instancer.GetProtoIndicesAttr().Get(&protoIndices, currentTime))
{
_LogAndSetError(instancerAttrMap, "Instancer has no prototype indices");
return;
}
const size_t numInstances = protoIndices.size();
if (numInstances == 0)
{
_LogAndSetError(instancerAttrMap, "Instancer has no prototype indices");
return;
}
for (auto protoIndex : protoIndices)
{
if (protoIndex < 0 || static_cast<size_t>(protoIndex) >= protoPaths.size())
{
_LogAndSetError(instancerAttrMap, TfStringPrintf(
"Out of range prototype index %d", protoIndex));
return;
}
}
// Mask (optional)
//
std::vector<bool> pruneMaskValues =
instancer.ComputeMaskAtTime(currentTime);
if (!pruneMaskValues.empty() and pruneMaskValues.size() != numInstances)
{
_LogAndSetError(instancerAttrMap,
"Mismatch in length of indices and mask");
return;
}
// Positions (required)
//
UsdAttribute positionsAttr = instancer.GetPositionsAttr();
if (!positionsAttr.HasValue())
{
_LogAndSetError(instancerAttrMap, "Instancer has no positions");
return;
}
//
// Compute instance transform matrices.
//
const double timeCodesPerSecond = stage->GetTimeCodesPerSecond();
// Gather frame-relative sample times and add them to the current time to
// generate absolute sample times.
//
const std::vector<double> &motionSampleTimes =
data.GetMotionSampleTimes(positionsAttr);
const size_t sampleCount = motionSampleTimes.size();
std::vector<UsdTimeCode> sampleTimes(sampleCount);
for (size_t a = 0; a < sampleCount; ++a)
{
sampleTimes[a] = UsdTimeCode(currentTime + motionSampleTimes[a]);
}
// Get velocityScale from the opArgs.
//
float velocityScale = FnKat::FloatAttribute(
inputAttrs.getChildByName("opArgs.velocityScale")).getValue(1.0f, false);
// XXX Replace with UsdGeomPointInstancer::ComputeInstanceTransformsAtTime.
//
std::vector<std::vector<GfMatrix4d>> xformSamples(sampleCount);
const size_t numXformSamples =
_ComputeInstanceTransformsAtTime(xformSamples, instancer, sampleTimes,
UsdTimeCode(currentTime), timeCodesPerSecond, numInstances,
positionsAttr, velocityScale);
if (numXformSamples == 0) {
_LogAndSetError(instancerAttrMap, "Could not compute "
"sample/topology-invarying instance "
"transform matrix");
return;
}
//
// Compute prototype bounds.
//
bool aggregateBoundsValid = false;
std::vector<double> aggregateBounds;
// XXX Replace with UsdGeomPointInstancer::ComputeExtentAtTime.
//
VtVec3fArray aggregateExtent;
if (_ComputeExtentAtTime(
aggregateExtent, data.GetUsdInArgs(), xformSamples,
motionSampleTimes, protoIndices, protoPaths, primCache,
pruneMaskValues)) {
aggregateBoundsValid = true;
aggregateBounds.resize(6);
aggregateBounds[0] = aggregateExtent[0][0]; // min x
aggregateBounds[1] = aggregateExtent[1][0]; // max x
aggregateBounds[2] = aggregateExtent[0][1]; // min y
aggregateBounds[3] = aggregateExtent[1][1]; // max y
aggregateBounds[4] = aggregateExtent[0][2]; // min z
aggregateBounds[5] = aggregateExtent[1][2]; // max z
}
//
// Build sources. Keep track of which instances use them.
//
FnGeolibServices::StaticSceneCreateOpArgsBuilder sourcesBldr(false);
std::vector<int> instanceIndices;
instanceIndices.reserve(numInstances);
std::vector<std::string> instanceSources;
instanceSources.reserve(protoPaths.size());
std::map<std::string, int> instanceSourceIndexMap;
std::vector<int> omitList;
omitList.reserve(numInstances);
std::map<SdfPath, std::string> protoPathsToKatPaths;
for (size_t i = 0; i < numInstances; ++i)
{
int index = protoIndices[i];
// Check to see if we are pruned.
//
bool isPruned = (!pruneMaskValues.empty() and
pruneMaskValues[i] == false);
if (isPruned)
{
omitList.push_back(i);
}
const SdfPath &protoPath = protoPaths[index];
// Compute the full (Katana) path to this prototype.
//
std::string fullProtoPath;
std::map<SdfPath, std::string>::const_iterator pptkpIt =
protoPathsToKatPaths.find(protoPath);
if (pptkpIt != protoPathsToKatPaths.end())
{
fullProtoPath = pptkpIt->second;
}
else
{
_PathToPrimMap::const_iterator pcIt = primCache.find(protoPath);
const UsdPrim &protoPrim = pcIt->second;
if (!protoPrim) {
continue;
}
// Determine where (what path) to start building the prototype prim
// such that its material bindings will be preserved. This could be
// the prototype path itself or an ancestor path.
//
SdfPathVector commonPrefixes;
UsdRelationship materialBindingsRel =
UsdShadeMaterial::GetBindingRel(protoPrim);
auto assetAPI = UsdModelAPI(protoPrim);
std::string assetName;
bool isReferencedModelPrim =
assetAPI.IsModel() and assetAPI.GetAssetName(&assetName);
if (!materialBindingsRel or isReferencedModelPrim)
{
// The prim has no material bindings or is a referenced model
// prim (meaning that materials are defined below it); start
// building at the prototype path.
//
commonPrefixes.push_back(protoPath);
}
else
{
SdfPathVector materialPaths;
materialBindingsRel.GetForwardedTargets(&materialPaths);
for (auto materialPath : materialPaths)
{
const SdfPath &commonPrefix =
protoPath.GetCommonPrefix(materialPath);
if (commonPrefix.GetString() == "/")
{
// XXX Unhandled case.
// The prototype prim and its material are not under the
// same parent; start building at the prototype path
// (although it is likely that bindings will be broken).
//
commonPrefixes.push_back(protoPath);
}
else
{
// Start building at the common ancestor between the
// prototype prim and its material.
//
commonPrefixes.push_back(commonPrefix);
}
}
}
// XXX Unhandled case.
// We'll use the first common ancestor even if there is more than
// one (which shouldn't appen if the prototype prim and its bindings
// are under the same parent).
//
SdfPath::RemoveDescendentPaths(&commonPrefixes);
const std::string buildPath = commonPrefixes[0].GetString();
// See if the path is a child of the point instancer. If so, we'll
// match its hierarchy. If not, we'll put it under a 'prototypes'
// group.
//
std::string relBuildPath;
if (pystring::startswith(buildPath, instancerPath + "/"))
{
relBuildPath = pystring::replace(
buildPath, instancerPath + "/", "");
}
else
{
relBuildPath = "prototypes/" +
FnGeolibUtil::Path::GetLeafName(buildPath);
}
// Start generating the full path to the prototype.
//
fullProtoPath = katOutputPath + "/" + relBuildPath;
// Make the common ancestor our instance source.
//
sourcesBldr.setAttrAtLocation(relBuildPath,
"type", FnKat::StringAttribute("instance source"));
// Author a tracking attr.
//
sourcesBldr.setAttrAtLocation(relBuildPath,
"info.usd.sourceUsdPath",
FnKat::StringAttribute(buildPath));
// Tell the BuildIntermediate op to start building at the common
// ancestor.
//
sourcesBldr.setAttrAtLocation(relBuildPath,
"usdPrimPath", FnKat::StringAttribute(buildPath));
sourcesBldr.setAttrAtLocation(relBuildPath,
"usdPrimName", FnKat::StringAttribute("geo"));
if (protoPath.GetString() != buildPath)
{
// Finish generating the full path to the prototype.
//
fullProtoPath = fullProtoPath + "/geo" + pystring::replace(
protoPath.GetString(), buildPath, "");
}
// Create a mapping that will link the instance's index to its
// prototype's full path.
//
instanceSourceIndexMap[fullProtoPath] = instanceSources.size();
instanceSources.push_back(fullProtoPath);
// Finally, store the full path in the map so we won't have to do
// this work again.
//
protoPathsToKatPaths[protoPath] = fullProtoPath;
}
instanceIndices.push_back(instanceSourceIndexMap[fullProtoPath]);
}
//
// Build instances.
//
FnGeolibServices::StaticSceneCreateOpArgsBuilder instancesBldr(false);
instancesBldr.createEmptyLocation("instances", "instance array");
instancesBldr.setAttrAtLocation("instances",
"geometry.instanceSource",
FnKat::StringAttribute(instanceSources, 1));
instancesBldr.setAttrAtLocation("instances",
"geometry.instanceIndex",
FnKat::IntAttribute(&instanceIndices[0],
instanceIndices.size(), 1));
FnKat::DoubleBuilder instanceMatrixBldr(16);
for (size_t a = 0; a < numXformSamples; ++a) {
double relSampleTime = motionSampleTimes[a];
// Shove samples into the builder at the frame-relative sample time. If
// motion is backwards, make sure to reverse time samples.
std::vector<double> &matVec = instanceMatrixBldr.get(
data.IsMotionBackward()
? PxrUsdKatanaUtils::ReverseTimeSample(relSampleTime)
: relSampleTime);
matVec.reserve(16 * numInstances);
for (size_t i = 0; i < numInstances; ++i) {
GfMatrix4d instanceXform = xformSamples[a][i];
const double *matArray = instanceXform.GetArray();
for (int j = 0; j < 16; ++j) {
matVec.push_back(matArray[j]);
}
}
}
instancesBldr.setAttrAtLocation("instances",
"geometry.instanceMatrix", instanceMatrixBldr.build());
if (!omitList.empty())
{
instancesBldr.setAttrAtLocation("instances",
"geometry.omitList",
FnKat::IntAttribute(&omitList[0], omitList.size(), 1));
}
instancesBldr.setAttrAtLocation("instances",
"geometry.pointInstancerId",
FnKat::StringAttribute(katOutputPath));
//
// Transfer primvars.
//
FnKat::GroupBuilder instancerPrimvarsBldr;
FnKat::GroupBuilder instancesPrimvarsBldr;
for (int64_t i = 0; i < primvarAttrs.getNumberOfChildren(); ++i)
{
const std::string primvarName = primvarAttrs.getChildName(i);
// Use "point" scope for the instancer.
instancerPrimvarsBldr.set(primvarName, primvarAttrs.getChildByIndex(i));
instancerPrimvarsBldr.set(primvarName + ".scope",
FnKat::StringAttribute("point"));
// User "primitive" scope for the instances.
instancesPrimvarsBldr.set(primvarName, primvarAttrs.getChildByIndex(i));
instancesPrimvarsBldr.set(primvarName + ".scope",
FnKat::StringAttribute("primitive"));
}
instancerAttrMap.set("geometry.arbitrary", instancerPrimvarsBldr.build());
instancesBldr.setAttrAtLocation("instances",
"geometry.arbitrary", instancesPrimvarsBldr.build());
//
// Set the final aggregate bounds.
//
if (aggregateBoundsValid)
{
instancerAttrMap.set("bound", FnKat::DoubleAttribute(&aggregateBounds[0], 6, 2));
}
//
// Set proxy attrs.
//
instancerAttrMap.set("proxies", PxrUsdKatanaUtils::GetViewerProxyAttr(data));
//
// Transfer builder results to our attr maps.
//
FnKat::GroupAttribute sourcesAttrs = sourcesBldr.build();
for (int64_t i = 0; i < sourcesAttrs.getNumberOfChildren(); ++i)
{
sourcesAttrMap.set(
sourcesAttrs.getChildName(i),
sourcesAttrs.getChildByIndex(i));
}
FnKat::GroupAttribute instancesAttrs = instancesBldr.build();
for (int64_t i = 0; i < instancesAttrs.getNumberOfChildren(); ++i)
{
instancesAttrMap.set(
instancesAttrs.getChildName(i),
instancesAttrs.getChildByIndex(i));
}
}
void
GlfSimpleLightingContext::SetStateFromOpenGL()
{
// import classic GL light's parameters into shaded lights
SetUseLighting(glIsEnabled(GL_LIGHTING));
GfMatrix4d worldToViewMatrix;
glGetDoublev(GL_MODELVIEW_MATRIX, worldToViewMatrix.GetArray());
GfMatrix4d viewToWorldMatrix = worldToViewMatrix.GetInverse();
GLint nLights = 0;
glGetIntegerv(GL_MAX_LIGHTS, &nLights);
GlfSimpleLightVector lights;
lights.reserve(nLights);
GlfSimpleLight light;
for(int i = 0; i < nLights; ++i)
{
int lightName = GL_LIGHT0 + i;
if (glIsEnabled(lightName)) {
GLfloat position[4], color[4];
glGetLightfv(lightName, GL_POSITION, position);
light.SetPosition(GfVec4f(position)*viewToWorldMatrix);
glGetLightfv(lightName, GL_AMBIENT, color);
light.SetAmbient(GfVec4f(color));
glGetLightfv(lightName, GL_DIFFUSE, color);
light.SetDiffuse(GfVec4f(color));
glGetLightfv(lightName, GL_SPECULAR, color);
light.SetSpecular(GfVec4f(color));
lights.push_back(light);
}
}
SetLights(lights);
GlfSimpleMaterial material;
GLfloat color[4], shininess;
glGetMaterialfv(GL_FRONT, GL_AMBIENT, color);
material.SetAmbient(GfVec4f(color));
glGetMaterialfv(GL_FRONT, GL_DIFFUSE, color);
material.SetDiffuse(GfVec4f(color));
glGetMaterialfv(GL_FRONT, GL_SPECULAR, color);
material.SetSpecular(GfVec4f(color));
glGetMaterialfv(GL_FRONT, GL_EMISSION, color);
material.SetEmission(GfVec4f(color));
glGetMaterialfv(GL_FRONT, GL_SHININESS, &shininess);
// clamp to 0.0001, since pow(0,0) is undefined in GLSL.
shininess = std::max(0.0001f, shininess);
material.SetShininess(shininess);
SetMaterial(material);
GfVec4f sceneAmbient;
glGetFloatv(GL_LIGHT_MODEL_AMBIENT, &sceneAmbient[0]);
SetSceneAmbient(sceneAmbient);
}
GfFrustum &
GfFrustum::Transform(const GfMatrix4d &matrix)
{
// We'll need the old parameters as we build up the new ones, so, work
// on a newly instantiated frustum. We'll replace the contents of
// this frustum with it once we are done. Note that _dirty is true
// by default, so, there is no need to initialize it here.
GfFrustum frustum;
// Copy the projection type
frustum._projectionType = _projectionType;
// Transform the position of the frustum
frustum._position = matrix.Transform(_position);
// Transform the rotation as follows:
// 1. build view and direction vectors
// 2. transform them with the given matrix
// 3. normalize the vectors and cross them to build an orthonormal frame
// 4. construct a rotation matrix
// 5. extract the new rotation from the matrix
// Generate view direction and up vector
GfVec3d viewDir = ComputeViewDirection();
GfVec3d upVec = ComputeUpVector();
// Transform by matrix
GfVec3d viewDirPrime = matrix.TransformDir(viewDir);
GfVec3d upVecPrime = matrix.TransformDir(upVec);
// Normalize. Save the vec size since it will be used to scale near/far.
double scale = viewDirPrime.Normalize();
upVecPrime.Normalize();
// Cross them to get the third axis. Voila. We have an orthonormal frame.
GfVec3d viewRightPrime = GfCross(viewDirPrime, upVecPrime);
viewRightPrime.Normalize();
// Construct a rotation matrix using the axes.
//
// [ right 0 ]
// [ up 1 ]
// [ -viewDir 0 ]
// [ 0 0 0 1 ]
GfMatrix4d rotMatrix;
rotMatrix.SetIdentity();
// first row
rotMatrix[0][0] = viewRightPrime[0];
rotMatrix[0][1] = viewRightPrime[1];
rotMatrix[0][2] = viewRightPrime[2];
// second row
rotMatrix[1][0] = upVecPrime[0];
rotMatrix[1][1] = upVecPrime[1];
rotMatrix[1][2] = upVecPrime[2];
// third row
rotMatrix[2][0] = -viewDirPrime[0];
rotMatrix[2][1] = -viewDirPrime[1];
rotMatrix[2][2] = -viewDirPrime[2];
// Extract rotation
frustum._rotation = rotMatrix.ExtractRotation();
// Since we applied the matrix to the direction vector, we can use
// its length to find out the scaling that needs to applied to the
// near and far plane.
frustum._nearFar = _nearFar * scale;
// Use the same length to scale the view distance
frustum._viewDistance = _viewDistance * scale;
// Transform the reference plane as follows:
//
// - construct two 3D points that are on the reference plane
// (left/bottom and right/top corner of the reference window)
// - transform the points with the given matrix
// - move the window back to one unit from the viewpoint and
// extract the 2D coordinates that would form the new reference
// window
//
// A note on how we do the last "move" of the reference window:
// Using similar triangles and the fact that the reference window
// is one unit away from the viewpoint, one can show that it's
// sufficient to divide the x and y components of the transformed
// corners by the length of the transformed direction vector.
//
// A 2D diagram helps:
//
// |
// |
// | |
// * ------+------------+
// vp |y1 |
// |
// \--d1--/ |y2
//
// \-------d2----------/
//
// So, y1/y2 = d1/d2 ==> y1 = y2 * d1/d2
// Since d1 = 1 ==> y1 = y2 / d2
// The same argument applies to the x coordinate.
//
// NOTE: In an orthographic projection, the last step (division by
// the length of the vector) is skipped.
//
// XXX NOTE2: The above derivation relies on the
// fact that GetReferecePlaneDepth() is 1.0.
// If we ever allow this to NOT be 1, we'll need to fix this up.
const GfVec2d &min = _window.GetMin();
const GfVec2d &max = _window.GetMax();
// Construct the corner points in 3D as follows: construct a starting
// point by using the x and y coordinates of the reference plane and
// -1 as the z coordinate. Add the position of the frustum to generate
// the actual points in world-space coordinates.
GfVec3d leftBottom =
_position + _rotation.TransformDir(GfVec3d(min[0], min[1], -1.0));
GfVec3d rightTop =
_position + _rotation.TransformDir(GfVec3d(max[0], max[1], -1.0));
// Now, transform the corner points by the given matrix
leftBottom = matrix.Transform(leftBottom);
rightTop = matrix.Transform(rightTop);
// Subtract the transformed frustum position from the transformed
// corner points. Then, rotate the points using the rotation that would
// transform the view direction vector back to (0, 0, -1). This brings
// the corner points from the woorld coordinate system into the local
// frustum one.
leftBottom -= frustum._position;
rightTop -= frustum._position;
leftBottom = frustum._rotation.GetInverse().TransformDir(leftBottom);
rightTop = frustum._rotation.GetInverse().TransformDir(rightTop);
// Finally, use the similar triangles trick to bring the corner
// points back at one unit away from the point. These scaled x and
// y coordinates can be directly used to construct the new
// transformed reference plane. Skip the scaling step for an
// orthographic projection, though.
if (_projectionType == Perspective) {
leftBottom /= scale;
rightTop /= scale;
}
frustum._window.SetMin(GfVec2d(leftBottom[0], leftBottom[1]));
frustum._window.SetMax(GfVec2d(rightTop[0], rightTop[1]));
// Note that negative scales in the transform have the potential
// to flip the window. Fix it if necessary.
GfVec2d wMin = frustum._window.GetMin();
GfVec2d wMax = frustum._window.GetMax();
// Make sure left < right
if ( wMin[0] > wMax[0] ) {
std::swap( wMin[0], wMax[0] );
}
// Make sure bottom < top
if ( wMin[1] > wMax[1] ) {
std::swap( wMin[1], wMax[1] );
}
frustum._window.SetMin( wMin );
frustum._window.SetMax( wMax );
*this = frustum;
return *this;
}
void
GfFrustum::_CalculateFrustumPlanes() const
{
if (!_planes.empty())
return;
_planes.reserve(6);
// These are values we need to construct the planes.
const GfVec2d &winMin = _window.GetMin();
const GfVec2d &winMax = _window.GetMax();
double near = _nearFar.GetMin();
double far = _nearFar.GetMax();
GfMatrix4d m = ComputeViewInverse();
// For a perspective frustum, we use the viewpoint and four
// corners of the near-plane frustum rectangle to define the 4
// planes forming the left, right, top, and bottom sides of the
// frustum.
if (_projectionType == GfFrustum::Perspective) {
//
// Get the eye-space viewpoint (the origin) and the four corners
// of the near-plane frustum rectangle using similar triangles.
//
// This picture may help:
//
// top of near plane
// frustum rectangle
//
// + --
// / | |
// / | |
// / | | h
// / | |
// / | |
// vp +-----------+ --
// center of near plane frustum rectangle
// |___________|
// near
//
// The height (h) of this triangle is found by the following
// equation, based on the definition of the _window member
// variable, which is the size of the image rectangle in the
// reference plane (a distance of 1 from the viewpoint):
//
// h _window.GetMax()[1]
// ------ = --------------------
// near 1
//
// Solving for h gets the height of the triangle. Doing the
// similar math for the other 3 sizes of the near-plane
// rectangle is left as an exercise for the reader.
//
// XXX Note: If we ever allow reference plane depth to be other
// than 1.0, we'll need to revisit this.
GfVec3d vp(0.0, 0.0, 0.0);
GfVec3d lb(near * winMin[0], near * winMin[1], -near);
GfVec3d rb(near * winMax[0], near * winMin[1], -near);
GfVec3d lt(near * winMin[0], near * winMax[1], -near);
GfVec3d rt(near * winMax[0], near * winMax[1], -near);
// Transform all 5 points into world space by the inverse of the
// view matrix (which converts from world space to eye space).
vp = m.Transform(vp);
lb = m.Transform(lb);
rb = m.Transform(rb);
lt = m.Transform(lt);
rt = m.Transform(rt);
// Construct the 6 planes. The three points defining each plane
// should obey the right-hand-rule; they should be in counter-clockwise
// order on the inside of the frustum. This makes the intersection of
// the half-spaces defined by the planes the contents of the frustum.
_planes.push_back( GfPlane(vp, lb, lt) ); // Left
_planes.push_back( GfPlane(vp, rt, rb) ); // Right
_planes.push_back( GfPlane(vp, rb, lb) ); // Bottom
_planes.push_back( GfPlane(vp, lt, rt) ); // Top
_planes.push_back( GfPlane(rb, lb, lt) ); // Near
}
// For an orthographic projection, we need only the four corners
// of the near-plane frustum rectangle and the view direction to
// define the 4 planes forming the left, right, top, and bottom
// sides of the frustum.
else {
//
// The math here is much easier than in the perspective case,
// because we have parallel lines instead of triangles. Just
// use the size of the image rectangle in the reference plane,
// which is the same in the near plane.
//
GfVec3d lb(winMin[0], winMin[1], -near);
GfVec3d rb(winMax[0], winMin[1], -near);
GfVec3d lt(winMin[0], winMax[1], -near);
GfVec3d rt(winMax[0], winMax[1], -near);
// Transform the 4 points into world space by the inverse of
// the view matrix (which converts from world space to eye
// space).
lb = m.Transform(lb);
rb = m.Transform(rb);
lt = m.Transform(lt);
rt = m.Transform(rt);
// Transform the canonical view direction (-z axis) into world
// space.
GfVec3d dir = m.TransformDir(-GfVec3d::ZAxis());
// Construct the 5 planes from these 4 points and the
// eye-space view direction.
_planes.push_back( GfPlane(lt + dir, lt, lb) ); // Left
_planes.push_back( GfPlane(rb + dir, rb, rt) ); // Right
_planes.push_back( GfPlane(lb + dir, lb, rb) ); // Bottom
_planes.push_back( GfPlane(rt + dir, rt, lt) ); // Top
_planes.push_back( GfPlane(rb, lb, lt) ); // Near
}
// The far plane is the opposite to the near plane. To compute the
// distance from the origin for the far plane, we take the distance
// for the near plane, add the difference between the far and the near
// and then negate that. We do the negation since the far plane
// faces the opposite direction. A small drawing would help:
//
// far - near
// /---------------------------\ *
//
// | | |
// | | |
// | | |
// <----|----> | |
// fnormal|nnormal | |
// | | |
// near plane far plane
//
// \---------/ *
// ndistance
//
// \---------------------------------------/ *
// fdistance
//
// So, fdistance = - (ndistance + (far - near))
_planes.push_back(
GfPlane(-_planes[4].GetNormal(),
-(_planes[4].GetDistanceFromOrigin() + (far - near))) );
}
void
GlfSimpleLightingContext::BindUniformBlocks(GlfBindingMapPtr const &bindingMap)
{
if (not _lightingUniformBlock)
_lightingUniformBlock = GlfUniformBlock::New();
if (not _shadowUniformBlock)
_shadowUniformBlock = GlfUniformBlock::New();
if (not _materialUniformBlock)
_materialUniformBlock = GlfUniformBlock::New();
bool shadowExists = false;
if ((not _lightingUniformBlockValid or
not _shadowUniformBlockValid) and _lights.size() > 0) {
int numLights = GetNumLightsUsed();
// 16byte aligned
struct LightSource {
float position[4];
float ambient[4];
float diffuse[4];
float specular[4];
float spotDirection[4];
float spotCutoff;
float spotFalloff;
float padding[2];
float attenuation[4];
bool hasShadow;
int32_t shadowIndex;
int32_t padding2[2];
};
struct Lighting {
int32_t useLighting;
int32_t useColorMaterialDiffuse;
int32_t padding[2];
LightSource lightSource[0];
};
// 16byte aligned
struct ShadowMatrix {
float viewToShadowMatrix[16];
float basis0[4];
float basis1[4];
float basis2[4];
float bias;
float padding[3];
};
struct Shadow {
ShadowMatrix shadow[0];
};
size_t lightingSize = sizeof(Lighting) + sizeof(LightSource) * numLights;
size_t shadowSize = sizeof(ShadowMatrix) * numLights;
Lighting *lightingData = (Lighting *)alloca(lightingSize);
Shadow *shadowData = (Shadow *)alloca(shadowSize);
memset(shadowData, 0, shadowSize);
memset(lightingData, 0, lightingSize);
GfMatrix4d viewToWorldMatrix = _worldToViewMatrix.GetInverse();
lightingData->useLighting = _useLighting;
lightingData->useColorMaterialDiffuse = _useColorMaterialDiffuse;
for (int i = 0; _useLighting and i < numLights; ++i) {
GlfSimpleLight const &light = _lights[i];
setVec4(lightingData->lightSource[i].position,
light.GetPosition() * _worldToViewMatrix);
setVec4(lightingData->lightSource[i].diffuse, light.GetDiffuse());
setVec4(lightingData->lightSource[i].ambient, light.GetAmbient());
setVec4(lightingData->lightSource[i].specular, light.GetSpecular());
setVec3(lightingData->lightSource[i].spotDirection,
_worldToViewMatrix.TransformDir(light.GetSpotDirection()));
setVec3(lightingData->lightSource[i].attenuation,
light.GetAttenuation());
lightingData->lightSource[i].spotCutoff = light.GetSpotCutoff();
lightingData->lightSource[i].spotFalloff = light.GetSpotFalloff();
lightingData->lightSource[i].hasShadow = light.HasShadow();
if (lightingData->lightSource[i].hasShadow) {
int shadowIndex = light.GetShadowIndex();
lightingData->lightSource[i].shadowIndex = shadowIndex;
GfMatrix4d viewToShadowMatrix = viewToWorldMatrix *
_shadows->GetWorldToShadowMatrix(shadowIndex);
double invBlur = 1.0/(std::max(0.0001F, light.GetShadowBlur()));
GfMatrix4d mat = viewToShadowMatrix.GetInverse();
GfVec4f xVec = GfVec4f(mat.GetRow(0) * invBlur);
GfVec4f yVec = GfVec4f(mat.GetRow(1) * invBlur);
GfVec4f zVec = GfVec4f(mat.GetRow(2));
shadowData->shadow[shadowIndex].bias = light.GetShadowBias();
setMatrix(shadowData->shadow[shadowIndex].viewToShadowMatrix,
viewToShadowMatrix);
setVec4(shadowData->shadow[shadowIndex].basis0, xVec);
setVec4(shadowData->shadow[shadowIndex].basis1, yVec);
setVec4(shadowData->shadow[shadowIndex].basis2, zVec);
shadowExists = true;
}
}
_lightingUniformBlock->Update(lightingData, lightingSize);
_lightingUniformBlockValid = true;
if (shadowExists) {
_shadowUniformBlock->Update(shadowData, shadowSize);
_shadowUniformBlockValid = true;
}
}
_lightingUniformBlock->Bind(bindingMap, _tokens->lightingUB);
if (shadowExists) {
_shadowUniformBlock->Bind(bindingMap, _tokens->shadowUB);
}
if (not _materialUniformBlockValid) {
// has to be matched with the definition of simpleLightingShader.glslfx
struct Material {
float ambient[4];
float diffuse[4];
float specular[4];
float emission[4];
float sceneColor[4]; // XXX: should be separated?
float shininess;
float padding[3];
} materialData;
memset(&materialData, 0, sizeof(materialData));
setVec4(materialData.ambient, _material.GetAmbient());
setVec4(materialData.diffuse, _material.GetDiffuse());
setVec4(materialData.specular, _material.GetSpecular());
setVec4(materialData.emission, _material.GetEmission());
materialData.shininess = _material.GetShininess();
setVec4(materialData.sceneColor, _sceneAmbient);
_materialUniformBlock->Update(&materialData, sizeof(materialData));
_materialUniformBlockValid = true;
}
_materialUniformBlock->Bind(bindingMap, _tokens->materialUB);
}
GfRGB GfRGB::Transform(const GfMatrix4d &m) const
{
return GfRGB(m.TransformDir(_rgb));
}
/* static */
GT_DataArrayHandle
GusdPrimWrapper::convertPrimvarData( const UsdGeomPrimvar& primvar, UsdTimeCode time ) {
SdfValueTypeName typeName = primvar.GetTypeName();
if( typeName == SdfValueTypeNames->Int )
{
int usdVal;
primvar.Get( &usdVal, time );
return new GT_Int32Array( &usdVal, 1, 1 );
}
else if( typeName == SdfValueTypeNames->Int64 )
{
int64_t usdVal;
primvar.Get( &usdVal, time );
return new GT_Int64Array( &usdVal, 1, 1 );
}
else if( typeName == SdfValueTypeNames->Float )
{
float usdVal;
primvar.Get( &usdVal, time );
return new GT_Real32Array( &usdVal, 1, 1 );
}
else if( typeName == SdfValueTypeNames->Double )
{
double usdVal;
primvar.Get( &usdVal, time );
return new GT_Real64Array( &usdVal, 1, 1 );
}
else if( typeName == SdfValueTypeNames->Float3 )
{
GfVec3f usdVal;
primvar.Get( &usdVal, time );
return new GT_Real32Array( usdVal.data(), 1, 3 );
}
else if( typeName == SdfValueTypeNames->Double3 )
{
GfVec3d usdVal;
primvar.Get( &usdVal, time );
return new GT_Real64Array( usdVal.data(), 1, 3 );
}
else if( typeName == SdfValueTypeNames->Color3f )
{
GfVec3f usdVal;
primvar.Get( &usdVal, time );
return new GT_Real32Array( usdVal.data(), 1, 3, GT_TYPE_COLOR );
}
else if( typeName == SdfValueTypeNames->Color3d )
{
GfVec3d usdVal;
primvar.Get( &usdVal, time );
return new GT_Real64Array( usdVal.data(), 1, 3, GT_TYPE_COLOR );
}
else if( typeName == SdfValueTypeNames->Normal3f )
{
GfVec3f usdVal;
primvar.Get( &usdVal, time );
return new GT_Real32Array( usdVal.data(), 1, 3, GT_TYPE_NORMAL );
}
else if( typeName == SdfValueTypeNames->Normal3d )
{
GfVec3d usdVal;
primvar.Get( &usdVal, time );
return new GT_Real64Array( usdVal.data(), 1, 3, GT_TYPE_NORMAL );
}
else if( typeName == SdfValueTypeNames->Point3f )
{
GfVec3f usdVal;
primvar.Get( &usdVal, time );
return new GT_Real32Array( usdVal.data(), 1, 3, GT_TYPE_POINT );
}
else if( typeName == SdfValueTypeNames->Point3d )
{
GfVec3d usdVal;
primvar.Get( &usdVal, time );
return new GT_Real64Array( usdVal.data(), 1, 3, GT_TYPE_POINT );
}
else if( typeName == SdfValueTypeNames->Float4 )
{
GfVec4f usdVal;
primvar.Get( &usdVal, time );
return new GT_Real32Array( usdVal.data(), 1, 4 );
}
else if( typeName == SdfValueTypeNames->Double4 )
{
GfVec4d usdVal;
primvar.Get( &usdVal, time );
return new GT_Real64Array( usdVal.data(), 1, 4 );
}
else if( typeName == SdfValueTypeNames->Quatf )
{
GfVec4f usdVal;
primvar.Get( &usdVal, time );
return new GT_Real32Array( usdVal.data(), 1, 4, GT_TYPE_QUATERNION );
}
else if( typeName == SdfValueTypeNames->Quatd )
{
GfVec4d usdVal;
primvar.Get( &usdVal, time );
return new GT_Real64Array( usdVal.data(), 1, 4, GT_TYPE_QUATERNION );
}
else if( typeName == SdfValueTypeNames->Matrix3d )
{
GfMatrix3d usdVal;
primvar.Get( &usdVal, time );
return new GT_Real64Array( usdVal.GetArray(), 1, 9, GT_TYPE_MATRIX3 );
}
else if( typeName == SdfValueTypeNames->Matrix4d ||
typeName == SdfValueTypeNames->Frame4d )
{
GfMatrix4d usdVal;
primvar.Get( &usdVal, time );
return new GT_Real64Array( usdVal.GetArray(), 1, 16, GT_TYPE_MATRIX );
}
else if( typeName == SdfValueTypeNames->String )
{
string usdVal;
primvar.Get( &usdVal, time );
auto gtString = new GT_DAIndexedString( 1 );
gtString->setString( 0, 0, usdVal.c_str() );
return gtString;
}
else if( typeName == SdfValueTypeNames->StringArray )
{
VtArray<string> usdVal;
primvar.ComputeFlattened( &usdVal, time );
auto gtString = new GT_DAIndexedString( usdVal.size() );
for( size_t i = 0; i < usdVal.size(); ++i )
gtString->setString( i, 0, usdVal[i].c_str() );
return gtString;
}
else if( typeName == SdfValueTypeNames->IntArray )
{
VtArray<int> usdVal;
primvar.ComputeFlattened( &usdVal, time );
return new GusdGT_VtArray<int>(usdVal);
}
else if( typeName == SdfValueTypeNames->Int64Array )
{
VtArray<int64_t> usdVal;
primvar.ComputeFlattened( &usdVal, time );
return new GusdGT_VtArray<int64_t>(usdVal);
}
else if( typeName == SdfValueTypeNames->FloatArray )
{
VtArray<float> usdVal;
primvar.ComputeFlattened( &usdVal, time );
return new GusdGT_VtArray<float>(usdVal);
}
else if( typeName == SdfValueTypeNames->DoubleArray )
{
VtArray<double> usdVal;
primvar.ComputeFlattened( &usdVal, time );
return new GusdGT_VtArray<double>(usdVal);
}
else if( typeName == SdfValueTypeNames->Float2Array )
{
VtArray<GfVec2f> usdVal;
primvar.ComputeFlattened( &usdVal, time );
return new GusdGT_VtArray<GfVec2f>(usdVal);
}
else if( typeName == SdfValueTypeNames->Double2Array )
{
VtArray<GfVec2d> usdVal;
primvar.ComputeFlattened( &usdVal, time );
return new GusdGT_VtArray<GfVec2d>(usdVal);
}
else if( typeName == SdfValueTypeNames->Float3Array )
{
VtArray<GfVec3f> usdVal;
primvar.ComputeFlattened( &usdVal, time );
return new GusdGT_VtArray<GfVec3f>(usdVal);
}
else if( typeName == SdfValueTypeNames->Double3Array )
{
VtArray<GfVec3d> usdVal;
primvar.ComputeFlattened( &usdVal, time );
return new GusdGT_VtArray<GfVec3d>(usdVal);
}
else if( typeName == SdfValueTypeNames->Color3fArray )
{
VtArray<GfVec3f> usdVal;
primvar.ComputeFlattened( &usdVal, time );
return new GusdGT_VtArray<GfVec3f>(usdVal,GT_TYPE_COLOR);
}
else if( typeName == SdfValueTypeNames->Color3dArray )
{
VtArray<GfVec3d> usdVal;
primvar.ComputeFlattened( &usdVal, time );
return new GusdGT_VtArray<GfVec3d>(usdVal,GT_TYPE_COLOR);
}
else if( typeName == SdfValueTypeNames->Vector3fArray )
{
VtArray<GfVec3f> usdVal;
primvar.ComputeFlattened( &usdVal, time );
return new GusdGT_VtArray<GfVec3f>(usdVal, GT_TYPE_VECTOR);
}
else if( typeName == SdfValueTypeNames->Vector3dArray )
{
VtArray<GfVec3d> usdVal;
primvar.ComputeFlattened( &usdVal, time );
return new GusdGT_VtArray<GfVec3d>(usdVal, GT_TYPE_VECTOR);
}
else if( typeName == SdfValueTypeNames->Normal3fArray )
{
VtArray<GfVec3f> usdVal;
primvar.ComputeFlattened( &usdVal, time );
return new GusdGT_VtArray<GfVec3f>(usdVal, GT_TYPE_NORMAL);
}
else if( typeName == SdfValueTypeNames->Normal3dArray )
{
VtArray<GfVec3d> usdVal;
primvar.ComputeFlattened( &usdVal, time );
return new GusdGT_VtArray<GfVec3d>(usdVal, GT_TYPE_NORMAL);
}
else if( typeName == SdfValueTypeNames->Point3fArray )
{
VtArray<GfVec3f> usdVal;
primvar.ComputeFlattened( &usdVal, time );
return new GusdGT_VtArray<GfVec3f>(usdVal, GT_TYPE_POINT);
}
else if( typeName == SdfValueTypeNames->Point3dArray )
{
VtArray<GfVec3d> usdVal;
primvar.ComputeFlattened( &usdVal, time );
return new GusdGT_VtArray<GfVec3d>(usdVal, GT_TYPE_POINT);
}
else if( typeName == SdfValueTypeNames->Float4Array )
{
VtArray<GfVec4f> usdVal;
primvar.ComputeFlattened( &usdVal, time );
return new GusdGT_VtArray<GfVec4f>(usdVal);
}
else if( typeName == SdfValueTypeNames->Double4Array )
{
VtArray<GfVec4d> usdVal;
primvar.ComputeFlattened( &usdVal, time );
return new GusdGT_VtArray<GfVec4d>(usdVal);
}
else if( typeName == SdfValueTypeNames->QuatfArray )
{
VtArray<GfVec4f> usdVal;
primvar.ComputeFlattened( &usdVal, time );
return new GusdGT_VtArray<GfVec4f>(usdVal, GT_TYPE_QUATERNION);
}
else if( typeName == SdfValueTypeNames->QuatdArray )
{
VtArray<GfVec4d> usdVal;
primvar.ComputeFlattened( &usdVal, time );
return new GusdGT_VtArray<GfVec4d>(usdVal, GT_TYPE_QUATERNION);
}
else if( typeName == SdfValueTypeNames->Matrix3dArray )
{
VtArray<GfMatrix3d> usdVal;
primvar.ComputeFlattened( &usdVal, time );
return new GusdGT_VtArray<GfMatrix3d>(usdVal, GT_TYPE_MATRIX3);
}
else if( typeName == SdfValueTypeNames->Matrix4dArray ||
typeName == SdfValueTypeNames->Frame4dArray )
{
VtArray<GfMatrix4d> usdVal;
primvar.ComputeFlattened( &usdVal, time );
return new GusdGT_VtArray<GfMatrix4d>(usdVal, GT_TYPE_MATRIX);
}
return NULL;
}
void Xform::updateSample(Time t_)
{
super::updateSample(t_);
if (m_update_flag.bits == 0) {
m_sample.flags = (m_sample.flags & ~(int)XformData::Flags::UpdatedMask);
return;
}
if (m_update_flag.variant_set_changed) { m_summary_needs_update = true; }
auto t = UsdTimeCode(t_);
const auto& conf = getImportSettings();
auto& sample = m_sample;
auto prev = sample;
if (m_summary.type == XformSummary::Type::TRS) {
auto translate = float3::zero();
auto scale = float3::one();
auto rotation = quatf::identity();
for (auto& op : m_read_ops) {
switch (op.GetOpType()) {
case UsdGeomXformOp::TypeTranslate:
{
float3 tmp;
op.GetAs((GfVec3f*)&tmp, t);
translate += tmp;
break;
}
case UsdGeomXformOp::TypeScale:
{
float3 tmp;
op.GetAs((GfVec3f*)&tmp, t);
scale *= tmp;
break;
}
case UsdGeomXformOp::TypeOrient:
{
quatf tmp;
op.GetAs((GfQuatf*)&tmp, t);
rotation *= tmp;
break;
}
case UsdGeomXformOp::TypeRotateX:
{
float angle;
op.GetAs(&angle, t);
rotation *= rotateX(angle * Deg2Rad);
break;
}
case UsdGeomXformOp::TypeRotateY:
{
float angle;
op.GetAs(&angle, t);
rotation *= rotateY(angle * Deg2Rad);
break;
}
case UsdGeomXformOp::TypeRotateZ:
{
float angle;
op.GetAs(&angle, t);
rotation *= rotateZ(angle * Deg2Rad);
break;
}
case UsdGeomXformOp::TypeRotateXYZ: //
case UsdGeomXformOp::TypeRotateXZY: //
case UsdGeomXformOp::TypeRotateYXZ: //
case UsdGeomXformOp::TypeRotateYZX: //
case UsdGeomXformOp::TypeRotateZXY: //
case UsdGeomXformOp::TypeRotateZYX: // fall through
{
float3 euler;
op.GetAs((GfVec3f*)&euler, t);
rotation *= EulerToQuaternion(euler * Deg2Rad, op.GetOpType());
break;
}
default:
break;
}
}
if (conf.swap_handedness) {
translate.x *= -1.0f;
rotation = swap_handedness(sample.rotation);
}
sample.position = translate;
sample.rotation = rotation;
sample.scale = scale;
}
else {
GfMatrix4d result;
result.SetIdentity();
for (auto& op : m_read_ops) {
auto m = op.GetOpTransform(t);
result = m * result;
}
GfTransform gft;
gft.SetMatrix(result);
(GfMatrix4f&)sample.transform = GfMatrix4f(result);
(GfVec3f&)sample.position = GfVec3f(gft.GetTranslation());
(GfQuatf&)sample.rotation = GfQuatf(gft.GetRotation().GetQuat());
(GfVec3f&)sample.scale = GfVec3f(gft.GetScale());
}
int update_flags = 0;
if (!near_equal(prev.position, sample.position)) {
update_flags |= (int)XformData::Flags::UpdatedPosition;
}
if (!near_equal(prev.rotation, sample.rotation)) {
update_flags |= (int)XformData::Flags::UpdatedRotation;
}
if (!near_equal(prev.scale, sample.scale)) {
update_flags |= (int)XformData::Flags::UpdatedScale;
}
sample.flags = (sample.flags & ~(int)XformData::Flags::UpdatedMask) | update_flags;
}
void
HdRprim::_PopulateConstantPrimVars(HdSceneDelegate* delegate,
HdDrawItem *drawItem,
HdDirtyBits *dirtyBits)
{
HD_TRACE_FUNCTION();
HF_MALLOC_TAG_FUNCTION();
SdfPath const& id = GetId();
HdRenderIndex &renderIndex = delegate->GetRenderIndex();
HdResourceRegistry *resourceRegistry = &HdResourceRegistry::GetInstance();
// XXX: this should be in a different method
// XXX: This should be in HdSt getting the HdSt Shader
const HdShader *shader = static_cast<const HdShader *>(
renderIndex.GetSprim(HdPrimTypeTokens->shader,
_surfaceShaderID));
if (shader == nullptr) {
shader = static_cast<const HdShader *>(
renderIndex.GetFallbackSprim(HdPrimTypeTokens->shader));
}
_sharedData.surfaceShader = shader->GetShaderCode();
// update uniforms
HdBufferSourceVector sources;
if (HdChangeTracker::IsTransformDirty(*dirtyBits, id)) {
GfMatrix4d transform = delegate->GetTransform(id);
_sharedData.bounds.SetMatrix(transform); // for CPU frustum culling
HdBufferSourceSharedPtr source(new HdVtBufferSource(
HdTokens->transform,
transform));
sources.push_back(source);
source.reset(new HdVtBufferSource(HdTokens->transformInverse,
transform.GetInverse()));
sources.push_back(source);
// if this is a prototype (has instancer),
// also push the instancer transform separately.
if (!_instancerID.IsEmpty()) {
// gather all instancer transforms in the instancing hierarchy
VtMatrix4dArray rootTransforms = _GetInstancerTransforms(delegate);
VtMatrix4dArray rootInverseTransforms(rootTransforms.size());
bool leftHanded = transform.IsLeftHanded();
for (size_t i = 0; i < rootTransforms.size(); ++i) {
rootInverseTransforms[i] = rootTransforms[i].GetInverse();
// flip the handedness if necessary
leftHanded ^= rootTransforms[i].IsLeftHanded();
}
source.reset(new HdVtBufferSource(
HdTokens->instancerTransform,
rootTransforms, /*staticArray=*/true));
sources.push_back(source);
source.reset(new HdVtBufferSource(
HdTokens->instancerTransformInverse,
rootInverseTransforms, /*staticArray=*/true));
sources.push_back(source);
// XXX: It might be worth to consider to have isFlipped
// for non-instanced prims as well. It can improve
// the drawing performance on older-GPUs by reducing
// fragment shader cost, although it needs more GPU memory.
// set as int (GLSL needs 32-bit align for bool)
source.reset(new HdVtBufferSource(
HdTokens->isFlipped, VtValue(int(leftHanded))));
sources.push_back(source);
}
}
if (HdChangeTracker::IsExtentDirty(*dirtyBits, id)) {
_sharedData.bounds.SetRange(GetExtent(delegate));
GfVec3d const & localMin = drawItem->GetBounds().GetBox().GetMin();
HdBufferSourceSharedPtr sourceMin(new HdVtBufferSource(
HdTokens->bboxLocalMin,
VtValue(GfVec4f(
localMin[0],
localMin[1],
localMin[2], 0))));
sources.push_back(sourceMin);
GfVec3d const & localMax = drawItem->GetBounds().GetBox().GetMax();
HdBufferSourceSharedPtr sourceMax(new HdVtBufferSource(
HdTokens->bboxLocalMax,
VtValue(GfVec4f(
localMax[0],
localMax[1],
localMax[2], 0))));
sources.push_back(sourceMax);
}
if (HdChangeTracker::IsPrimIdDirty(*dirtyBits, id)) {
GfVec4f primIdColor;
int32_t primId = GetPrimId();
HdBufferSourceSharedPtr source(new HdVtBufferSource(
HdTokens->primID,
VtValue(primId)));
sources.push_back(source);
}
if (HdChangeTracker::IsAnyPrimVarDirty(*dirtyBits, id)) {
TfTokenVector primVarNames = delegate->GetPrimVarConstantNames(id);
sources.reserve(sources.size()+primVarNames.size());
TF_FOR_ALL(nameIt, primVarNames) {
if (HdChangeTracker::IsPrimVarDirty(*dirtyBits, id, *nameIt)) {
VtValue value = delegate->Get(id, *nameIt);
// XXX Hydra doesn't support string primvar yet
if (value.IsHolding<std::string>()) continue;
if (!value.IsEmpty()) {
HdBufferSourceSharedPtr source(
new HdVtBufferSource(*nameIt, value));
// if it's an unacceptable type, skip it (e.g. std::string)
if (source->GetNumComponents() > 0) {
sources.push_back(source);
}
}
}
}
}
void
My_TestGLDrawing::DrawTest(bool offscreen)
{
std::cout << "My_TestGLDrawing::DrawTest()\n";
HdPerfLog& perfLog = HdPerfLog::GetInstance();
perfLog.Enable();
// Reset all counters we care about.
perfLog.ResetCache(HdTokens->extent);
perfLog.ResetCache(HdTokens->points);
perfLog.ResetCache(HdTokens->topology);
perfLog.ResetCache(HdTokens->transform);
perfLog.SetCounter(UsdImagingTokens->usdVaryingExtent, 0);
perfLog.SetCounter(UsdImagingTokens->usdVaryingPrimvar, 0);
perfLog.SetCounter(UsdImagingTokens->usdVaryingTopology, 0);
perfLog.SetCounter(UsdImagingTokens->usdVaryingVisibility, 0);
perfLog.SetCounter(UsdImagingTokens->usdVaryingXform, 0);
int width = GetWidth(), height = GetHeight();
double aspectRatio = double(width)/height;
GfFrustum frustum;
frustum.SetPerspective(60.0, aspectRatio, 1, 100000.0);
GfMatrix4d viewMatrix;
viewMatrix.SetIdentity();
viewMatrix *= GfMatrix4d().SetRotate(GfRotation(GfVec3d(0, 1, 0), _rotate[0]));
viewMatrix *= GfMatrix4d().SetRotate(GfRotation(GfVec3d(1, 0, 0), _rotate[1]));
viewMatrix *= GfMatrix4d().SetTranslate(GfVec3d(_translate[0], _translate[1], _translate[2]));
GfMatrix4d projMatrix = frustum.ComputeProjectionMatrix();
GfMatrix4d modelViewMatrix = viewMatrix;
if (UsdGeomGetStageUpAxis(_stage) == UsdGeomTokens->z) {
// rotate from z-up to y-up
modelViewMatrix =
GfMatrix4d().SetRotate(GfRotation(GfVec3d(1.0,0.0,0.0), -90.0)) *
modelViewMatrix;
}
GfVec4d viewport(0, 0, width, height);
_engine->SetCameraState(modelViewMatrix, projMatrix, viewport);
size_t i = 0;
TF_FOR_ALL(timeIt, GetTimes()) {
UsdTimeCode time = *timeIt;
if (*timeIt == -999) {
time = UsdTimeCode::Default();
}
UsdImagingGLRenderParams params;
params.drawMode = GetDrawMode();
params.enableLighting = IsEnabledTestLighting();
params.enableIdRender = IsEnabledIdRender();
params.frame = time;
params.complexity = _GetComplexity();
params.cullStyle = IsEnabledCullBackfaces() ?
UsdImagingGLCullStyle::CULL_STYLE_BACK :
UsdImagingGLCullStyle::CULL_STYLE_NOTHING;
glViewport(0, 0, width, height);
glEnable(GL_DEPTH_TEST);
if(IsEnabledTestLighting()) {
if(UsdImagingGLEngine::IsHydraEnabled()) {
_engine->SetLightingState(_lightingContext);
} else {
_engine->SetLightingStateFromOpenGL();
}
}
if (!GetClipPlanes().empty()) {
params.clipPlanes = GetClipPlanes();
for (size_t i=0; i<GetClipPlanes().size(); ++i) {
glEnable(GL_CLIP_PLANE0 + i);
}
}
GfVec4f const &clearColor = GetClearColor();
GLfloat clearDepth[1] = { 1.0f };
// Make sure we render to convergence.
TfErrorMark mark;
do {
glClearBufferfv(GL_COLOR, 0, clearColor.data());
glClearBufferfv(GL_DEPTH, 0, clearDepth);
_engine->Render(_stage->GetPseudoRoot(), params);
} while (!_engine->IsConverged());
TF_VERIFY(mark.IsClean(), "Errors occurred while rendering!");
std::cout << "itemsDrawn " << perfLog.GetCounter(HdTokens->itemsDrawn) << std::endl;
std::cout << "totalItemCount " << perfLog.GetCounter(HdTokens->totalItemCount) << std::endl;
std::string imageFilePath = GetOutputFilePath();
if (!imageFilePath.empty()) {
if (time != UsdTimeCode::Default()) {
std::stringstream suffix;
suffix << "_" << std::setw(3) << std::setfill('0') << params.frame << ".png";
imageFilePath = TfStringReplace(imageFilePath, ".png", suffix.str());
}
std::cout << imageFilePath << "\n";
WriteToFile("color", imageFilePath);
}
i++;
}
