//--------------------------------------------------------------------------------------------------------------
void ParameterChangeTransfer::transferChangesTo (ParameterChanges& dest)
{
ParamID pid;
ParamValue value;
int32 sampleOffset;
int32 index;
while (getNextChange (pid, value, sampleOffset))
{
IParamValueQueue* queue = dest.addParameterData (pid, index);
if (queue)
{
queue->addPoint (sampleOffset, value, index);
}
}
}
//------------------------------------------------------------------------
tresult PLUGIN_API UIDescriptionTestProcessor::process (ProcessData& data)
{
ParamValue peak = 0.;
for (int32 sample = 0; sample < data.numSamples; sample++)
{
for (int32 channel = 0; channel < data.inputs[0].numChannels; channel++)
{
float value = data.inputs[0].channelBuffers32[channel][sample];
data.outputs[0].channelBuffers32[channel][sample] = value;
value = fabs (value);
if (value > peak)
peak = value;
}
}
if (data.outputParameterChanges)
{
int32 index;
IParamValueQueue* queue = data.outputParameterChanges->addParameterData (kPeakParam, index);
if (queue)
queue->addPoint (0, peak, index);
}
return kResultTrue;
}
//------------------------------------------------------------------------
tresult PLUGIN_API AGainSimple::process (ProcessData& data)
{
// finally the process function
// In this example there are 4 steps:
// 1) Read inputs parameters coming from host (in order to adapt our model values)
// 2) Read inputs events coming from host (we apply a gain reduction depending of the velocity of pressed key)
// 3) Process the gain of the input buffer to the output buffer
// 4) Write the new VUmeter value to the output Parameters queue
//---1) Read inputs parameter changes-----------
IParameterChanges* paramChanges = data.inputParameterChanges;
if (paramChanges)
{
int32 numParamsChanged = paramChanges->getParameterCount ();
// for each parameter which are some changes in this audio block:
for (int32 i = 0; i < numParamsChanged; i++)
{
IParamValueQueue* paramQueue = paramChanges->getParameterData (i);
if (paramQueue)
{
int32 offsetSamples;
double value;
int32 numPoints = paramQueue->getPointCount ();
switch (paramQueue->getParameterId ())
{
case kGainId:
// we use in this example only the last point of the queue.
// in some wanted case for specific kind of parameter it makes sense to retrieve all points
// and process the whole audio block in small blocks.
if (paramQueue->getPoint (numPoints - 1, offsetSamples, value) == kResultTrue)
fGain = (float)value;
break;
case kBypassId:
if (paramQueue->getPoint (numPoints - 1, offsetSamples, value) == kResultTrue)
bBypass = (value > 0.5f);
break;
}
}
}
}
//---2) Read input events-------------
IEventList* eventList = data.inputEvents;
if (eventList)
{
int32 numEvent = eventList->getEventCount ();
for (int32 i = 0; i < numEvent; i++)
{
Event event;
if (eventList->getEvent (i, event) == kResultOk)
{
switch (event.type)
{
//----------------------
case Event::kNoteOnEvent:
// use the velocity as gain modifier
fGainReduction = event.noteOn.velocity;
break;
//----------------------
case Event::kNoteOffEvent:
// noteOff reset the reduction
fGainReduction = 0.f;
break;
}
}
}
}
//-------------------------------------
//---3) Process Audio---------------------
//-------------------------------------
if (data.numInputs == 0 || data.numOutputs == 0)
{
// nothing to do
return kResultOk;
}
// (simplification) we suppose in this example that we have the same input channel count than the output
int32 numChannels = data.inputs[0].numChannels;
//---get audio buffers----------------
float** in = data.inputs[0].channelBuffers32;
float** out = data.outputs[0].channelBuffers32;
//---check if silence---------------
// normally we have to check each channel (simplification)
if (data.inputs[0].silenceFlags != 0)
{
// mark output silence too
data.outputs[0].silenceFlags = data.inputs[0].silenceFlags;
// the Plug-in has to be sure that if it sets the flags silence that the output buffer are clear
int32 sampleFrames = data.numSamples;
for (int32 i = 0; i < numChannels; i++)
{
// dont need to be cleared if the buffers are the same (in this case input buffer are already cleared by the host)
if (in[i] != out[i])
{
memset (out[i], 0, sampleFrames * sizeof (float));
}
}
// nothing to do at this point
return kResultOk;
}
// mark our outputs has not silent
data.outputs[0].silenceFlags = 0;
//---in bypass mode outputs should be like inputs-----
if (bBypass)
{
int32 sampleFrames = data.numSamples;
for (int32 i = 0; i < numChannels; i++)
{
// dont need to be copied if the buffers are the same
if (in[i] != out[i])
memcpy (out[i], in[i], sampleFrames * sizeof (float));
}
// in this example we dont update the VuMeter in Bypass
}
else
{
float fVuPPM = 0.f;
//---apply gain factor----------
float gain = (fGain - fGainReduction);
if (bHalfGain)
{
gain = gain * 0.5f;
}
if (gain < 0.0000001)
{
int32 sampleFrames = data.numSamples;
for (int32 i = 0; i < numChannels; i++)
{
memset (out[i], 0, sampleFrames * sizeof (float));
}
data.outputs[0].silenceFlags = (1 << numChannels) - 1; // this will set to 1 all channels
fVuPPM = 0.f;
}
else
{
// in real Plug-in it would be better to do dezippering to avoid jump (click) in gain value
for (int32 i = 0; i < numChannels; i++)
{
int32 sampleFrames = data.numSamples;
float* ptrIn = in[i];
float* ptrOut = out[i];
float tmp;
while (--sampleFrames >= 0)
{
// apply gain
tmp = (*ptrIn++) * gain;
(*ptrOut++) = tmp;
// check only positiv values
if (tmp > fVuPPM)
fVuPPM = tmp;
}
}
}
//---3) Write outputs parameter changes-----------
IParameterChanges* paramChanges = data.outputParameterChanges;
// a new value of VuMeter will be send to the host
// (the host will send it back in sync to our controller for updating our editor)
if (paramChanges && fVuPPMOld != fVuPPM)
{
int32 index = 0;
IParamValueQueue* paramQueue = paramChanges->addParameterData (kVuPPMId, index);
if (paramQueue)
{
int32 index2 = 0;
paramQueue->addPoint (0, fVuPPM, index2);
}
}
fVuPPMOld = fVuPPM;
}
return kResultOk;
}