示例#1
0
//--------------------------------------------------------------------------------------------------------------
void ParameterChangeTransfer::transferChangesTo (ParameterChanges& dest)
{
	ParamID pid;
	ParamValue value;
	int32 sampleOffset;
	int32 index;
	
	while (getNextChange (pid, value, sampleOffset))
	{
		IParamValueQueue* queue = dest.addParameterData (pid, index);
		if (queue)
		{
			queue->addPoint (sampleOffset, value, index);
		}
	}
}
示例#2
0
//------------------------------------------------------------------------
tresult PLUGIN_API UIDescriptionTestProcessor::process (ProcessData& data)
{
	ParamValue peak = 0.;
	for (int32 sample = 0; sample < data.numSamples; sample++)
	{
		for (int32 channel = 0; channel < data.inputs[0].numChannels; channel++)
		{
			float value = data.inputs[0].channelBuffers32[channel][sample];
			data.outputs[0].channelBuffers32[channel][sample] = value;
			value = fabs (value);
			if (value > peak)
				peak = value;
		}
	}
	if (data.outputParameterChanges)
	{
		int32 index;
		IParamValueQueue* queue = data.outputParameterChanges->addParameterData (kPeakParam, index);
		if (queue)
			queue->addPoint (0, peak, index);
	}
	return kResultTrue;
}
示例#3
0
//------------------------------------------------------------------------
tresult PLUGIN_API AGainSimple::process (ProcessData& data)
{
	// finally the process function
	// In this example there are 4 steps:
	// 1) Read inputs parameters coming from host (in order to adapt our model values)
	// 2) Read inputs events coming from host (we apply a gain reduction depending of the velocity of pressed key)
	// 3) Process the gain of the input buffer to the output buffer
	// 4) Write the new VUmeter value to the output Parameters queue


	//---1) Read inputs parameter changes-----------
	IParameterChanges* paramChanges = data.inputParameterChanges;
	if (paramChanges)
	{
		int32 numParamsChanged = paramChanges->getParameterCount ();
		// for each parameter which are some changes in this audio block:
		for (int32 i = 0; i < numParamsChanged; i++)
		{
			IParamValueQueue* paramQueue = paramChanges->getParameterData (i);
			if (paramQueue)
			{
				int32 offsetSamples;
				double value;
				int32 numPoints = paramQueue->getPointCount ();				
				switch (paramQueue->getParameterId ())
				{
					case kGainId:
						// we use in this example only the last point of the queue.
						// in some wanted case for specific kind of parameter it makes sense to retrieve all points
						// and process the whole audio block in small blocks.
						if (paramQueue->getPoint (numPoints - 1,  offsetSamples, value) == kResultTrue)
							fGain = (float)value;
						break;

					case kBypassId:
						if (paramQueue->getPoint (numPoints - 1,  offsetSamples, value) == kResultTrue)
							bBypass = (value > 0.5f);
						break;
				}
			}
		}
	}
	
	//---2) Read input events-------------
	IEventList* eventList = data.inputEvents;
	if (eventList) 
	{
		int32 numEvent = eventList->getEventCount ();
		for (int32 i = 0; i < numEvent; i++)
		{
			Event event;
			if (eventList->getEvent (i, event) == kResultOk)
			{
				switch (event.type)
				{
					//----------------------
					case Event::kNoteOnEvent:
						// use the velocity as gain modifier
						fGainReduction = event.noteOn.velocity;
						break;
					
					//----------------------
					case Event::kNoteOffEvent:
						// noteOff reset the reduction
						fGainReduction = 0.f;
						break;
				}
			}
		}
	}
		
	//-------------------------------------
	//---3) Process Audio---------------------
	//-------------------------------------
	if (data.numInputs == 0 || data.numOutputs == 0)
	{
		// nothing to do
		return kResultOk;
	}

	// (simplification) we suppose in this example that we have the same input channel count than the output
	int32 numChannels = data.inputs[0].numChannels;
	//---get audio buffers----------------
	float** in  = data.inputs[0].channelBuffers32;
	float** out = data.outputs[0].channelBuffers32;

	//---check if silence---------------
	// normally we have to check each channel (simplification)
	if (data.inputs[0].silenceFlags != 0)
	{
		// mark output silence too
		data.outputs[0].silenceFlags = data.inputs[0].silenceFlags;
		
		// the Plug-in has to be sure that if it sets the flags silence that the output buffer are clear
		int32 sampleFrames = data.numSamples;
		for (int32 i = 0; i < numChannels; i++)
		{
			// dont need to be cleared if the buffers are the same (in this case input buffer are already cleared by the host)
			if (in[i] != out[i])
			{
				memset (out[i], 0, sampleFrames * sizeof (float));
			}
		}

		// nothing to do at this point
		return kResultOk;
	}

	// mark our outputs has not silent
	data.outputs[0].silenceFlags = 0;

	//---in bypass mode outputs should be like inputs-----
	if (bBypass)
	{
		int32 sampleFrames = data.numSamples;
		for (int32 i = 0; i < numChannels; i++)
		{
			// dont need to be copied if the buffers are the same
			if (in[i] != out[i])
				memcpy (out[i], in[i], sampleFrames * sizeof (float));
		}
		// in this example we dont update the VuMeter in Bypass
	}
	else
	{
		float fVuPPM = 0.f;

		//---apply gain factor----------
		float gain = (fGain - fGainReduction);
		if (bHalfGain)
		{
			gain = gain * 0.5f;
		}

		if (gain < 0.0000001)
		{
			int32 sampleFrames = data.numSamples;
			for (int32 i = 0; i < numChannels; i++)
			{
				memset (out[i], 0, sampleFrames * sizeof (float));
			}
			data.outputs[0].silenceFlags = (1 << numChannels) - 1;  // this will set to 1 all channels
			fVuPPM = 0.f;
		}
		else
		{
			// in real Plug-in it would be better to do dezippering to avoid jump (click) in gain value
			for (int32 i = 0; i < numChannels; i++)
			{
				int32 sampleFrames = data.numSamples;
				float* ptrIn  = in[i];
				float* ptrOut = out[i];
				float tmp;
				while (--sampleFrames >= 0)
				{
					// apply gain
					tmp = (*ptrIn++) * gain;
					(*ptrOut++) = tmp;

					// check only positiv values
					if (tmp > fVuPPM)
						fVuPPM = tmp;
				}
			}
		}

		//---3) Write outputs parameter changes-----------
		IParameterChanges* paramChanges = data.outputParameterChanges;
		// a new value of VuMeter will be send to the host 
		// (the host will send it back in sync to our controller for updating our editor)
		if (paramChanges && fVuPPMOld != fVuPPM)
		{
			int32 index = 0;
			IParamValueQueue* paramQueue = paramChanges->addParameterData (kVuPPMId, index);
			if (paramQueue)
			{
				int32 index2 = 0;
				paramQueue->addPoint (0, fVuPPM, index2); 
			}
		}
		fVuPPMOld = fVuPPM;
	}

	return kResultOk;
}