Ejemplo n.º 1
0
void DAGTypeLegalizer::ExpandRes_NormalLoad(SDNode *N, SDValue &Lo,
                                            SDValue &Hi) {
  assert(ISD::isNormalLoad(N) && "This routine only for normal loads!");
  SDLoc dl(N);

  LoadSDNode *LD = cast<LoadSDNode>(N);
  EVT ValueVT = LD->getValueType(0);
  EVT NVT = TLI.getTypeToTransformTo(*DAG.getContext(), ValueVT);
  SDValue Chain = LD->getChain();
  SDValue Ptr = LD->getBasePtr();
  unsigned Alignment = LD->getAlignment();
  bool isVolatile = LD->isVolatile();
  bool isNonTemporal = LD->isNonTemporal();
  bool isInvariant = LD->isInvariant();
  AAMDNodes AAInfo = LD->getAAInfo();

  assert(NVT.isByteSized() && "Expanded type not byte sized!");

  Lo = DAG.getLoad(NVT, dl, Chain, Ptr, LD->getPointerInfo(),
                   isVolatile, isNonTemporal, isInvariant, Alignment,
                   AAInfo);

  // Increment the pointer to the other half.
  unsigned IncrementSize = NVT.getSizeInBits() / 8;
  Ptr = DAG.getNode(ISD::ADD, dl, Ptr.getValueType(), Ptr,
                    DAG.getConstant(IncrementSize, dl, Ptr.getValueType()));
  Hi = DAG.getLoad(NVT, dl, Chain, Ptr,
                   LD->getPointerInfo().getWithOffset(IncrementSize),
                   isVolatile, isNonTemporal, isInvariant,
                   MinAlign(Alignment, IncrementSize), AAInfo);

  // Build a factor node to remember that this load is independent of the
  // other one.
  Chain = DAG.getNode(ISD::TokenFactor, dl, MVT::Other, Lo.getValue(1),
                      Hi.getValue(1));

  // Handle endianness of the load.
  if (TLI.hasBigEndianPartOrdering(ValueVT))
    std::swap(Lo, Hi);

  // Modified the chain - switch anything that used the old chain to use
  // the new one.
  ReplaceValueWith(SDValue(N, 1), Chain);
}
Ejemplo n.º 2
0
void DAGTypeLegalizer::ExpandRes_NormalLoad(SDNode *N, SDValue &Lo,
                                            SDValue &Hi) {
  assert(ISD::isNormalLoad(N) && "This routine only for normal loads!");
  DebugLoc dl = N->getDebugLoc();

  LoadSDNode *LD = cast<LoadSDNode>(N);
  MVT NVT = TLI.getTypeToTransformTo(LD->getValueType(0));
  SDValue Chain = LD->getChain();
  SDValue Ptr = LD->getBasePtr();
  int SVOffset = LD->getSrcValueOffset();
  unsigned Alignment = LD->getAlignment();
  bool isVolatile = LD->isVolatile();

  assert(NVT.isByteSized() && "Expanded type not byte sized!");

  Lo = DAG.getLoad(NVT, dl, Chain, Ptr, LD->getSrcValue(), SVOffset,
                   isVolatile, Alignment);

  // Increment the pointer to the other half.
  unsigned IncrementSize = NVT.getSizeInBits() / 8;
  Ptr = DAG.getNode(ISD::ADD, dl, Ptr.getValueType(), Ptr,
                    DAG.getIntPtrConstant(IncrementSize));
  Hi = DAG.getLoad(NVT, dl, Chain, Ptr, LD->getSrcValue(),
                   SVOffset+IncrementSize,
                   isVolatile, MinAlign(Alignment, IncrementSize));

  // Build a factor node to remember that this load is independent of the
  // other one.
  Chain = DAG.getNode(ISD::TokenFactor, dl, MVT::Other, Lo.getValue(1),
                      Hi.getValue(1));

  // Handle endianness of the load.
  if (TLI.isBigEndian())
    std::swap(Lo, Hi);

  // Modified the chain - switch anything that used the old chain to use
  // the new one.
  ReplaceValueWith(SDValue(N, 1), Chain);
}
Ejemplo n.º 3
0
SDNode *NVPTXDAGToDAGISel::SelectLoad(SDNode *N) {
  DebugLoc dl = N->getDebugLoc();
  LoadSDNode *LD = cast<LoadSDNode>(N);
  EVT LoadedVT = LD->getMemoryVT();
  SDNode *NVPTXLD = NULL;

  // do not support pre/post inc/dec
  if (LD->isIndexed())
    return NULL;

  if (!LoadedVT.isSimple())
    return NULL;

  // Address Space Setting
  unsigned int codeAddrSpace = getCodeAddrSpace(LD, Subtarget);

  // Volatile Setting
  // - .volatile is only availalble for .global and .shared
  bool isVolatile = LD->isVolatile();
  if (codeAddrSpace != NVPTX::PTXLdStInstCode::GLOBAL &&
      codeAddrSpace != NVPTX::PTXLdStInstCode::SHARED &&
      codeAddrSpace != NVPTX::PTXLdStInstCode::GENERIC)
    isVolatile = false;

  // Vector Setting
  MVT SimpleVT = LoadedVT.getSimpleVT();
  unsigned vecType = NVPTX::PTXLdStInstCode::Scalar;
  if (SimpleVT.isVector()) {
    unsigned num = SimpleVT.getVectorNumElements();
    if (num == 2)
      vecType = NVPTX::PTXLdStInstCode::V2;
    else if (num == 4)
      vecType = NVPTX::PTXLdStInstCode::V4;
    else
      return NULL;
  }

  // Type Setting: fromType + fromTypeWidth
  //
  // Sign   : ISD::SEXTLOAD
  // Unsign : ISD::ZEXTLOAD, ISD::NON_EXTLOAD or ISD::EXTLOAD and the
  //          type is integer
  // Float  : ISD::NON_EXTLOAD or ISD::EXTLOAD and the type is float
  MVT ScalarVT = SimpleVT.getScalarType();
  unsigned fromTypeWidth = ScalarVT.getSizeInBits();
  unsigned int fromType;
  if ((LD->getExtensionType() == ISD::SEXTLOAD))
    fromType = NVPTX::PTXLdStInstCode::Signed;
  else if (ScalarVT.isFloatingPoint())
    fromType = NVPTX::PTXLdStInstCode::Float;
  else
    fromType = NVPTX::PTXLdStInstCode::Unsigned;

  // Create the machine instruction DAG
  SDValue Chain = N->getOperand(0);
  SDValue N1 = N->getOperand(1);
  SDValue Addr;
  SDValue Offset, Base;
  unsigned Opcode;
  MVT::SimpleValueType TargetVT = LD->getValueType(0).getSimpleVT().SimpleTy;

  if (SelectDirectAddr(N1, Addr)) {
    switch (TargetVT) {
    case MVT::i8:
      Opcode = NVPTX::LD_i8_avar;
      break;
    case MVT::i16:
      Opcode = NVPTX::LD_i16_avar;
      break;
    case MVT::i32:
      Opcode = NVPTX::LD_i32_avar;
      break;
    case MVT::i64:
      Opcode = NVPTX::LD_i64_avar;
      break;
    case MVT::f32:
      Opcode = NVPTX::LD_f32_avar;
      break;
    case MVT::f64:
      Opcode = NVPTX::LD_f64_avar;
      break;
    default:
      return NULL;
    }
    SDValue Ops[] = { getI32Imm(isVolatile), getI32Imm(codeAddrSpace),
                      getI32Imm(vecType), getI32Imm(fromType),
                      getI32Imm(fromTypeWidth), Addr, Chain };
    NVPTXLD = CurDAG->getMachineNode(Opcode, dl, TargetVT, MVT::Other, Ops, 7);
  } else if (Subtarget.is64Bit()
                 ? SelectADDRsi64(N1.getNode(), N1, Base, Offset)
                 : SelectADDRsi(N1.getNode(), N1, Base, Offset)) {
    switch (TargetVT) {
    case MVT::i8:
      Opcode = NVPTX::LD_i8_asi;
      break;
    case MVT::i16:
      Opcode = NVPTX::LD_i16_asi;
      break;
    case MVT::i32:
      Opcode = NVPTX::LD_i32_asi;
      break;
    case MVT::i64:
      Opcode = NVPTX::LD_i64_asi;
      break;
    case MVT::f32:
      Opcode = NVPTX::LD_f32_asi;
      break;
    case MVT::f64:
      Opcode = NVPTX::LD_f64_asi;
      break;
    default:
      return NULL;
    }
    SDValue Ops[] = { getI32Imm(isVolatile), getI32Imm(codeAddrSpace),
                      getI32Imm(vecType), getI32Imm(fromType),
                      getI32Imm(fromTypeWidth), Base, Offset, Chain };
    NVPTXLD = CurDAG->getMachineNode(Opcode, dl, TargetVT, MVT::Other, Ops, 8);
  } else if (Subtarget.is64Bit()
                 ? SelectADDRri64(N1.getNode(), N1, Base, Offset)
                 : SelectADDRri(N1.getNode(), N1, Base, Offset)) {
    if (Subtarget.is64Bit()) {
      switch (TargetVT) {
      case MVT::i8:
        Opcode = NVPTX::LD_i8_ari_64;
        break;
      case MVT::i16:
        Opcode = NVPTX::LD_i16_ari_64;
        break;
      case MVT::i32:
        Opcode = NVPTX::LD_i32_ari_64;
        break;
      case MVT::i64:
        Opcode = NVPTX::LD_i64_ari_64;
        break;
      case MVT::f32:
        Opcode = NVPTX::LD_f32_ari_64;
        break;
      case MVT::f64:
        Opcode = NVPTX::LD_f64_ari_64;
        break;
      default:
        return NULL;
      }
    } else {
      switch (TargetVT) {
      case MVT::i8:
        Opcode = NVPTX::LD_i8_ari;
        break;
      case MVT::i16:
        Opcode = NVPTX::LD_i16_ari;
        break;
      case MVT::i32:
        Opcode = NVPTX::LD_i32_ari;
        break;
      case MVT::i64:
        Opcode = NVPTX::LD_i64_ari;
        break;
      case MVT::f32:
        Opcode = NVPTX::LD_f32_ari;
        break;
      case MVT::f64:
        Opcode = NVPTX::LD_f64_ari;
        break;
      default:
        return NULL;
      }
    }
    SDValue Ops[] = { getI32Imm(isVolatile), getI32Imm(codeAddrSpace),
                      getI32Imm(vecType), getI32Imm(fromType),
                      getI32Imm(fromTypeWidth), Base, Offset, Chain };
    NVPTXLD = CurDAG->getMachineNode(Opcode, dl, TargetVT, MVT::Other, Ops, 8);
  } else {
    if (Subtarget.is64Bit()) {
      switch (TargetVT) {
      case MVT::i8:
        Opcode = NVPTX::LD_i8_areg_64;
        break;
      case MVT::i16:
        Opcode = NVPTX::LD_i16_areg_64;
        break;
      case MVT::i32:
        Opcode = NVPTX::LD_i32_areg_64;
        break;
      case MVT::i64:
        Opcode = NVPTX::LD_i64_areg_64;
        break;
      case MVT::f32:
        Opcode = NVPTX::LD_f32_areg_64;
        break;
      case MVT::f64:
        Opcode = NVPTX::LD_f64_areg_64;
        break;
      default:
        return NULL;
      }
    } else {
      switch (TargetVT) {
      case MVT::i8:
        Opcode = NVPTX::LD_i8_areg;
        break;
      case MVT::i16:
        Opcode = NVPTX::LD_i16_areg;
        break;
      case MVT::i32:
        Opcode = NVPTX::LD_i32_areg;
        break;
      case MVT::i64:
        Opcode = NVPTX::LD_i64_areg;
        break;
      case MVT::f32:
        Opcode = NVPTX::LD_f32_areg;
        break;
      case MVT::f64:
        Opcode = NVPTX::LD_f64_areg;
        break;
      default:
        return NULL;
      }
    }
    SDValue Ops[] = { getI32Imm(isVolatile), getI32Imm(codeAddrSpace),
                      getI32Imm(vecType), getI32Imm(fromType),
                      getI32Imm(fromTypeWidth), N1, Chain };
    NVPTXLD = CurDAG->getMachineNode(Opcode, dl, TargetVT, MVT::Other, Ops, 7);
  }

  if (NVPTXLD != NULL) {
    MachineSDNode::mmo_iterator MemRefs0 = MF->allocateMemRefsArray(1);
    MemRefs0[0] = cast<MemSDNode>(N)->getMemOperand();
    cast<MachineSDNode>(NVPTXLD)->setMemRefs(MemRefs0, MemRefs0 + 1);
  }

  return NVPTXLD;
}