void OpenSubdMesh::add_face(int *index, int num)
{
OsdHbrMesh *hbrmesh = (OsdHbrMesh*)_hbrmesh;
#ifndef NDEBUG
/* sanity checks */
for(int j = 0; j < num; j++) {
OsdHbrVertex *origin = hbrmesh->GetVertex(index[j]);
OsdHbrVertex *destination = hbrmesh->GetVertex(index[(j+1)%num]);
OsdHbrHalfEdge *opposite = destination->GetEdge(origin);
if(origin==NULL || destination==NULL)
assert("An edge was specified that connected a nonexistent vertex\n");
if(origin == destination)
assert("An edge was specified that connected a vertex to itself\n");
if(opposite && opposite->GetOpposite())
assert("A non-manifold edge incident to more than 2 faces was found\n");
if(origin->GetEdge(destination))
assert("An edge connecting two vertices was specified more than once."
"It's likely that an incident face was flipped\n");
}
#endif
OsdHbrFace *face = hbrmesh->NewFace(num, index, 0);
/* this is required for limit eval patch table? */
face->SetPtexIndex(num_ptex_faces);
if(num == 4)
num_ptex_faces++;
else
num_ptex_faces += num;
}
OsdHbrMesh *
ConvertToHBR( int nVertices,
std::vector<int> const & faceVertCounts,
std::vector<int> const & faceIndices,
std::vector<int> const & vtxCreaseIndices,
std::vector<double> const & vtxCreases,
std::vector<int> const & edgeCrease1Indices, // face index, local edge index
std::vector<float> const & edgeCreases1,
std::vector<int> const & edgeCrease2Indices, // 2 vertex indices (Maya friendly)
std::vector<double> const & edgeCreases2,
OsdHbrMesh::InterpolateBoundaryMethod interpBoundary,
HbrMeshUtil::SchemeType scheme,
bool usingPtex,
FVarDataDesc const * fvarDesc,
std::vector<float> const * fvarData
)
{
static OpenSubdiv::HbrBilinearSubdivision<OpenSubdiv::OsdVertex> _bilinear;
static OpenSubdiv::HbrLoopSubdivision<OpenSubdiv::OsdVertex> _loop;
static OpenSubdiv::HbrCatmarkSubdivision<OpenSubdiv::OsdVertex> _catmark;
// Build HBR mesh with/without face varying data, according to input data.
// If a face-varying descriptor is passed in its memory needs to stay
// alive as long as this hbrMesh is alive (for indices and widths arrays).
OsdHbrMesh *hbrMesh;
if ( fvarDesc )
{
if (scheme == HbrMeshUtil::kCatmark)
hbrMesh = new OsdHbrMesh(&_catmark, fvarDesc->getCount(),
fvarDesc->getIndices(),
fvarDesc->getWidths(),
fvarDesc->getTotalWidth());
else if (scheme == HbrMeshUtil::kLoop)
hbrMesh = new OsdHbrMesh(&_loop, fvarDesc->getCount(),
fvarDesc->getIndices(),
fvarDesc->getWidths(),
fvarDesc->getTotalWidth());
else
hbrMesh = new OsdHbrMesh(&_bilinear, fvarDesc->getCount(),
fvarDesc->getIndices(),
fvarDesc->getWidths(),
fvarDesc->getTotalWidth());
}
else
{
if (scheme == HbrMeshUtil::kCatmark)
hbrMesh = new OsdHbrMesh(&_catmark);
else if (scheme == HbrMeshUtil::kLoop)
hbrMesh = new OsdHbrMesh(&_loop);
else
hbrMesh = new OsdHbrMesh(&_bilinear);
}
// create empty verts: actual vertices initialized in UpdatePoints();
OpenSubdiv::OsdVertex v;
for (int i = 0; i < nVertices; ++i) {
hbrMesh->NewVertex(i, v);
}
std::vector<int> vIndex;
int nFaces = (int)faceVertCounts.size();
int fvcOffset = 0; // face-vertex count offset
int ptxIdx = 0;
for (int fi = 0; fi < nFaces; ++fi)
{
int nFaceVerts = faceVertCounts[fi];
vIndex.resize(nFaceVerts);
bool valid = true;
for (int fvi = 0; fvi < nFaceVerts; ++fvi)
{
vIndex[fvi] = faceIndices[fvi + fvcOffset];
int vNextIndex = faceIndices[(fvi+1) % nFaceVerts + fvcOffset];
// check for non-manifold face
OsdHbrVertex * origin = hbrMesh->GetVertex(vIndex[fvi]);
OsdHbrVertex * destination = hbrMesh->GetVertex(vNextIndex);
if (!origin || !destination) {
OSD_ERROR("ERROR : An edge was specified that connected a nonexistent vertex");
valid = false;
}
if (origin == destination) {
OSD_ERROR("ERROR : An edge was specified that connected a vertex to itself");
valid = false;
}
OsdHbrHalfedge * opposite = destination->GetEdge(origin);
if (opposite && opposite->GetOpposite()) {
OSD_ERROR("ERROR : A non-manifold edge incident to more than 2 faces was found");
valid = false;
}
if (origin->GetEdge(destination)) {
OSD_ERROR("ERROR : An edge connecting two vertices was specified more than once. "
"It's likely that an incident face was flipped");
valid = false;
}
}
if ( valid )
{
if (scheme == HbrMeshUtil::kLoop) {
// triangulate
int triangle[3];
triangle[0] = vIndex[0];
for (int fvi = 2; fvi < nFaceVerts; ++fvi) {
triangle[1] = vIndex[fvi-1];
triangle[2] = vIndex[fvi];
hbrMesh->NewFace(3, triangle, 0);
}
// ptex not fully implemented for loop, yet
// fvar not fully implemented for loop, yet
} else {
// bilinear not entirely implemented
OsdHbrFace *face = hbrMesh->NewFace(nFaceVerts, &(vIndex[0]), 0);
if (usingPtex) {
face->SetPtexIndex(ptxIdx);
ptxIdx += (nFaceVerts == 4) ? 1 : nFaceVerts;
}
if (fvarData) {
int fvarWidth = hbrMesh->GetTotalFVarWidth();
const float *faceData = &(*fvarData)[ fvcOffset*fvarWidth ];
for(int fvi=0; fvi<nFaceVerts; ++fvi)
{
OsdHbrVertex *v = hbrMesh->GetVertex( vIndex[fvi] );
OsdHbrFVarData& fvarData = v->GetFVarData(face);
if ( ! fvarData.IsInitialized() )
{
fvarData.SetAllData( fvarWidth, faceData );
}
else if (!fvarData.CompareAll(fvarWidth, faceData))
{
OsdHbrFVarData& fvarData = v->NewFVarData(face);
fvarData.SetAllData( fvarWidth, faceData );
}
// advance pointer to next set of face-varying data
faceData += fvarWidth;
}
}
}
} else {
OSD_ERROR("Face %d will be ignored\n", fi);
}
fvcOffset += nFaceVerts;
}
// Assign boundary interpolation methods
hbrMesh->SetInterpolateBoundaryMethod(interpBoundary);
if ( fvarDesc )
hbrMesh->SetFVarInterpolateBoundaryMethod(fvarDesc->getInterpBoundary());
// XXX hbr behavior doesn't match naming of k_Interpolate constants
// hbrMesh->SetFVarInterpolateBoundaryMethod(OsdHbrMesh::k_InterpolateBoundaryEdgeAndCorner); // no for cube
// hbrMesh->SetFVarInterpolateBoundaryMethod(OsdHbrMesh::k_InterpolateBoundaryNone); // yes for cube
// hbrMesh->SetFVarInterpolateBoundaryMethod(OsdHbrMesh::k_InterpolateBoundaryEdgeOnly);
// set edge crease in two different indexing way
size_t nEdgeCreases = edgeCreases1.size();
for (size_t i = 0; i < nEdgeCreases; ++i) {
if (edgeCreases1[i] <= 0.0)
continue;
OsdHbrHalfedge * e = hbrMesh->
GetFace(edgeCrease1Indices[i*2])->
GetEdge(edgeCrease1Indices[i*2+1]);
if (!e) {
OSD_ERROR("Can't find edge (face %d edge %d)\n",
edgeCrease1Indices[i*2], edgeCrease1Indices[i*2+1]);
continue;
}
e->SetSharpness(static_cast<float>(edgeCreases1[i]));
}
nEdgeCreases = edgeCreases2.size();
for (size_t i = 0; i < nEdgeCreases; ++i) {
if (edgeCreases2[i] <= 0.0)
continue;
OsdHbrVertex * v0 = hbrMesh->GetVertex(edgeCrease2Indices[i*2]);
OsdHbrVertex * v1 = hbrMesh->GetVertex(edgeCrease2Indices[i*2+1]);
OsdHbrHalfedge * e = NULL;
if (v0 && v1)
if (!(e = v0->GetEdge(v1)))
e = v1->GetEdge(v0);
if (!e) {
OSD_ERROR("ERROR can't find edge");
continue;
}
e->SetSharpness(static_cast<float>(edgeCreases2[i]));
}
// set corner
{
size_t nVertexCreases = vtxCreases.size();
for (size_t i = 0; i < nVertexCreases; ++i) {
if (vtxCreases[i] <= 0.0)
continue;
OsdHbrVertex * v = hbrMesh->GetVertex(vtxCreaseIndices[i]);
if (!v) {
OSD_ERROR("Can't find vertex %d\n", vtxCreaseIndices[i]);
continue;
}
v->SetSharpness(static_cast<float>(vtxCreases[i]));
}
}
hbrMesh->Finish();
return hbrMesh;
}