Ejemplo n.º 1
0
void DIALOG_PLOT::Plot( wxCommandEvent& event )
{
    applyPlotSettings();

    // If no layer selected, we have nothing plotted.
    // Prompt user if it happens because he could think there is a bug in Pcbnew.
    if( !m_plotOpts.GetLayerSelection().any() )
    {
        DisplayError( this, _( "No layer selected, Nothing to plot" ) );
        return;
    }

    // Create output directory if it does not exist (also transform it in
    // absolute form). Bail if it fails
    wxFileName  outputDir = wxFileName::DirName( m_plotOpts.GetOutputDirectory() );
    wxString    boardFilename = m_parent->GetBoard()->GetFileName();
    REPORTER&   reporter = m_messagesPanel->Reporter();

    if( !EnsureFileDirectoryExists( &outputDir, boardFilename, &reporter ) )
    {
        wxString msg;
        msg.Printf( _( "Could not write plot files to folder \"%s\"." ),
                    GetChars( outputDir.GetPath() ) );
        DisplayError( this, msg );
        return;
    }

    m_plotOpts.SetAutoScale( false );
    m_plotOpts.SetScale( 1 );

    switch( m_plotOpts.GetScaleSelection() )
    {
    default:
        break;

    case 0:     // Autoscale option
        m_plotOpts.SetAutoScale( true );
        break;

    case 2:     // 3:2 option
        m_plotOpts.SetScale( 1.5 );
        break;

    case 3:     // 2:1 option
        m_plotOpts.SetScale( 2 );
        break;

    case 4:     // 3:1 option
        m_plotOpts.SetScale( 3 );
        break;
    }

    /* If the scale factor edit controls are disabled or the scale value
     * is 0, don't adjust the base scale factor. This fixes a bug when
     * the default scale adjust is initialized to 0 and saved in program
     * settings resulting in a divide by zero fault.
     */
    if( m_fineAdjustXscaleOpt->IsEnabled()  && m_XScaleAdjust != 0.0 )
        m_plotOpts.SetFineScaleAdjustX( m_XScaleAdjust );

    if( m_fineAdjustYscaleOpt->IsEnabled() && m_YScaleAdjust != 0.0 )
        m_plotOpts.SetFineScaleAdjustY( m_YScaleAdjust );

    if( m_PSFineAdjustWidthOpt->IsEnabled() )
        m_plotOpts.SetWidthAdjust( m_PSWidthAdjust );

    wxString file_ext( GetDefaultPlotExtension( m_plotOpts.GetFormat() ) );

    // Test for a reasonable scale value
    // XXX could this actually happen? isn't it constrained in the apply
    // function?
    if( m_plotOpts.GetScale() < PLOT_MIN_SCALE )
        DisplayInfoMessage( this,
                            _( "Warning: Scale option set to a very small value" ) );

    if( m_plotOpts.GetScale() > PLOT_MAX_SCALE )
        DisplayInfoMessage( this,
                            _( "Warning: Scale option set to a very large value" ) );

    GERBER_JOBFILE_WRITER jobfile_writer( m_board, &reporter );

    // Save the current plot options in the board
    m_parent->SetPlotSettings( m_plotOpts );

    wxBusyCursor dummy;

    for( LSEQ seq = m_plotOpts.GetLayerSelection().UIOrder();  seq;  ++seq )
    {
        PCB_LAYER_ID layer = *seq;

        // All copper layers that are disabled are actually selected
        // This is due to wonkyness in automatically selecting copper layers
        // for plotting when adding more than two layers to a board.
        // If plot options become accessible to the layers setup dialog
        // please move this functionality there!
        // This skips a copper layer if it is actually disabled on the board.
        if( ( LSET::AllCuMask() & ~m_board->GetEnabledLayers() )[layer] )
            continue;

        // Pick the basename from the board file
        wxFileName fn( boardFilename );

        // Use Gerber Extensions based on layer number
        // (See http://en.wikipedia.org/wiki/Gerber_File)
        if( m_plotOpts.GetFormat() == PLOT_FORMAT_GERBER && m_useGerberExtensions->GetValue() )
            file_ext = GetGerberProtelExtension( layer );

        BuildPlotFileName( &fn, outputDir.GetPath(), m_board->GetLayerName( layer ), file_ext );
        wxString fullname = fn.GetFullName();
        jobfile_writer.AddGbrFile( layer, fullname );

        LOCALE_IO toggle;

        BOARD*      board = m_parent->GetBoard();
        PLOTTER*    plotter = StartPlotBoard( board, &m_plotOpts, layer, fn.GetFullPath(), wxEmptyString );

        // Print diags in messages box:
        wxString msg;

        if( plotter )
        {
            PlotOneBoardLayer( board, plotter, layer, m_plotOpts );
            plotter->EndPlot();
            delete plotter;

            msg.Printf( _( "Plot file \"%s\" created." ), GetChars( fn.GetFullPath() ) );
            reporter.Report( msg, REPORTER::RPT_ACTION );
        }
        else
        {
            msg.Printf( _( "Unable to create file \"%s\"." ), GetChars( fn.GetFullPath() ) );
            reporter.Report( msg, REPORTER::RPT_ERROR );
        }
    }

    if( m_plotOpts.GetFormat() == PLOT_FORMAT_GERBER && m_plotOpts.GetCreateGerberJobFile() )
    {
        // Pick the basename from the board file
        wxFileName fn( boardFilename );
        // Build gerber job file from basename
        BuildPlotFileName( &fn, outputDir.GetPath(), "job", GerberJobFileExtension );
        jobfile_writer.CreateJobFile( fn.GetFullPath() );
    }
}
Ejemplo n.º 2
0
bool GENDRILL_WRITER_BASE::genDrillMapFile( const wxString& aFullFileName,
                                            PlotFormat aFormat )
{
    // Remark:
    // Hole list must be created before calling this function, by buildHolesList(),
    // for the right holes set (PTH, NPTH, buried/blind vias ...)

    double          scale = 1.0;
    wxPoint         offset;
    PLOTTER*        plotter = NULL;
    PAGE_INFO dummy( PAGE_INFO::A4, false );

    PCB_PLOT_PARAMS plot_opts;  // starts plotting with default options

    LOCALE_IO       toggle;     // use standard C notation for float numbers

    const PAGE_INFO& page_info =  m_pageInfo ? *m_pageInfo : dummy;

    // Calculate dimensions and center of PCB
    EDA_RECT        bbbox = m_pcb->GetBoardEdgesBoundingBox();

    // Calculate the scale for the format type, scale 1 in HPGL, drawing on
    // an A4 sheet in PS, + text description of symbols
    switch( aFormat )
    {
    case PLOT_FORMAT_GERBER:
        offset  = GetOffset();
        plotter = new GERBER_PLOTTER();
        plotter->SetViewport( offset, IU_PER_MILS/10, scale, false );
        plotter->SetGerberCoordinatesFormat( 5 );   // format x.5 unit = mm
        break;

    case PLOT_FORMAT_HPGL:    // Scale for HPGL format.
    {
        HPGL_PLOTTER* hpgl_plotter = new HPGL_PLOTTER;
        plotter = hpgl_plotter;
        hpgl_plotter->SetPenNumber( plot_opts.GetHPGLPenNum() );
        hpgl_plotter->SetPenSpeed( plot_opts.GetHPGLPenSpeed() );
        plotter->SetPageSettings( page_info );
        plotter->SetViewport( offset, IU_PER_MILS/10, scale, false );
    }
        break;


    default:
        wxASSERT( false );
        // fall through
    case PLOT_FORMAT_PDF:
    case PLOT_FORMAT_POST:
    {
        PAGE_INFO   pageA4( wxT( "A4" ) );
        wxSize      pageSizeIU = pageA4.GetSizeIU();

        // Reserve a margin around the page.
        int         margin = KiROUND( 20 * IU_PER_MM );

        // Calculate a scaling factor to print the board on the sheet
        double      Xscale = double( pageSizeIU.x - ( 2 * margin ) ) / bbbox.GetWidth();

        // We should print the list of drill sizes, so reserve room for it
        // 60% height for board 40% height for list
        int     ypagesize_for_board = KiROUND( pageSizeIU.y * 0.6 );
        double  Yscale = double( ypagesize_for_board - margin ) / bbbox.GetHeight();

        scale = std::min( Xscale, Yscale );

        // Experience shows the scale should not to large, because texts
        // create problem (can be to big or too small).
        // So the scale is clipped at 3.0;
        scale = std::min( scale, 3.0 );

        offset.x    = KiROUND( double( bbbox.Centre().x ) -
                               ( pageSizeIU.x / 2.0 ) / scale );
        offset.y    = KiROUND( double( bbbox.Centre().y ) -
                               ( ypagesize_for_board / 2.0 ) / scale );

        if( aFormat == PLOT_FORMAT_PDF )
            plotter = new PDF_PLOTTER;
        else
            plotter = new PS_PLOTTER;

        plotter->SetPageSettings( pageA4 );
        plotter->SetViewport( offset, IU_PER_MILS/10, scale, false );
    }
        break;

    case PLOT_FORMAT_DXF:
    {
        DXF_PLOTTER* dxf_plotter = new DXF_PLOTTER;
        plotter = dxf_plotter;
        plotter->SetPageSettings( page_info );
        plotter->SetViewport( offset, IU_PER_MILS/10, scale, false );
    }
        break;

    case PLOT_FORMAT_SVG:
    {
        SVG_PLOTTER* svg_plotter = new SVG_PLOTTER;
        plotter = svg_plotter;
        plotter->SetPageSettings( page_info );
        plotter->SetViewport( offset, IU_PER_MILS/10, scale, false );
    }
        break;
    }

    plotter->SetCreator( wxT( "PCBNEW" ) );
    plotter->SetDefaultLineWidth( 5 * IU_PER_MILS );
    plotter->SetColorMode( false );

    if( ! plotter->OpenFile( aFullFileName ) )
    {
        delete plotter;
        return false;
    }

    plotter->StartPlot();

    // Draw items on edge layer (not all, only items useful for drill map
    BRDITEMS_PLOTTER itemplotter( plotter, m_pcb, plot_opts );
    itemplotter.SetLayerSet( Edge_Cuts );

    for( auto PtStruct : m_pcb->Drawings() )
    {
        switch( PtStruct->Type() )
        {
        case PCB_LINE_T:
            itemplotter.PlotDrawSegment( (DRAWSEGMENT*) PtStruct );
            break;

        case PCB_TEXT_T:
            itemplotter.PlotTextePcb( (TEXTE_PCB*) PtStruct );
            break;

        case PCB_DIMENSION_T:
        case PCB_TARGET_T:
        case PCB_MARKER_T:     // do not draw
        default:
            break;
        }
    }

    int         x, y;
    int         plotX, plotY, TextWidth;
    int         intervalle = 0;
    char        line[1024];
    wxString    msg;
    int         textmarginaftersymbol = KiROUND( 2 * IU_PER_MM );

    // Set Drill Symbols width
    plotter->SetDefaultLineWidth( 0.2 * IU_PER_MM / scale );
    plotter->SetCurrentLineWidth( -1 );

    // Plot board outlines and drill map
    plotDrillMarks( plotter );

    // Print a list of symbols used.
    int     charSize    = 3 * IU_PER_MM;                    // text size in IUs
    double  charScale   = 1.0 / scale;                      // real scale will be 1/scale,
                                                            // because the global plot scale is scale
    TextWidth   = KiROUND( (charSize * charScale) / 10.0 );    // Set text width (thickness)
    intervalle  = KiROUND( charSize * charScale ) + TextWidth;

    // Trace information.
    plotX   = KiROUND( bbbox.GetX() + textmarginaftersymbol * charScale );
    plotY   = bbbox.GetBottom() + intervalle;

    // Plot title  "Info"
    wxString Text = wxT( "Drill Map:" );
    plotter->Text( wxPoint( plotX, plotY ), COLOR4D::UNSPECIFIED, Text, 0,
                   wxSize( KiROUND( charSize * charScale ),
                           KiROUND( charSize * charScale ) ),
                   GR_TEXT_HJUSTIFY_LEFT, GR_TEXT_VJUSTIFY_CENTER,
                   TextWidth, false, false );

    for( unsigned ii = 0; ii < m_toolListBuffer.size(); ii++ )
    {
        DRILL_TOOL& tool = m_toolListBuffer[ii];

        if( tool.m_TotalCount == 0 )
            continue;

        plotY += intervalle;

        int plot_diam = KiROUND( tool.m_Diameter );
        x = KiROUND( plotX - textmarginaftersymbol * charScale - plot_diam / 2.0 );
        y = KiROUND( plotY + charSize * charScale );
        plotter->Marker( wxPoint( x, y ), plot_diam, ii );

        // List the diameter of each drill in mm and inches.
        sprintf( line, "%2.2fmm / %2.3f\" ",
                 diameter_in_mm( tool.m_Diameter ),
                 diameter_in_inches( tool.m_Diameter ) );

        msg = FROM_UTF8( line );

        // Now list how many holes and ovals are associated with each drill.
        if( ( tool.m_TotalCount == 1 )
            && ( tool.m_OvalCount == 0 ) )
            sprintf( line, "(1 hole)" );
        else if( tool.m_TotalCount == 1 ) // && ( toolm_OvalCount == 1 )
            sprintf( line, "(1 slot)" );
        else if( tool.m_OvalCount == 0 )
            sprintf( line, "(%d holes)", tool.m_TotalCount );
        else if( tool.m_OvalCount == 1 )
            sprintf( line, "(%d holes + 1 slot)", tool.m_TotalCount - 1 );
        else // if ( toolm_OvalCount > 1 )
            sprintf( line, "(%d holes + %d slots)",
                     tool.m_TotalCount - tool.m_OvalCount,
                     tool.m_OvalCount );

        msg += FROM_UTF8( line );

        if( tool.m_Hole_NotPlated )
            msg += wxT( " (not plated)" );

        plotter->Text( wxPoint( plotX, y ), COLOR4D::UNSPECIFIED, msg, 0,
                       wxSize( KiROUND( charSize * charScale ),
                               KiROUND( charSize * charScale ) ),
                       GR_TEXT_HJUSTIFY_LEFT, GR_TEXT_VJUSTIFY_CENTER,
                       TextWidth, false, false );

        intervalle = KiROUND( ( ( charSize * charScale ) + TextWidth ) * 1.2 );

        if( intervalle < ( plot_diam + ( 1 * IU_PER_MM / scale ) + TextWidth ) )
            intervalle = plot_diam + ( 1 * IU_PER_MM / scale ) + TextWidth;
    }

    plotter->EndPlot();
    delete plotter;

    return true;
}