void DIALOG_PLOT::Plot( wxCommandEvent& event )
{
applyPlotSettings();
// If no layer selected, we have nothing plotted.
// Prompt user if it happens because he could think there is a bug in Pcbnew.
if( !m_plotOpts.GetLayerSelection().any() )
{
DisplayError( this, _( "No layer selected, Nothing to plot" ) );
return;
}
// Create output directory if it does not exist (also transform it in
// absolute form). Bail if it fails
wxFileName outputDir = wxFileName::DirName( m_plotOpts.GetOutputDirectory() );
wxString boardFilename = m_parent->GetBoard()->GetFileName();
REPORTER& reporter = m_messagesPanel->Reporter();
if( !EnsureFileDirectoryExists( &outputDir, boardFilename, &reporter ) )
{
wxString msg;
msg.Printf( _( "Could not write plot files to folder \"%s\"." ),
GetChars( outputDir.GetPath() ) );
DisplayError( this, msg );
return;
}
m_plotOpts.SetAutoScale( false );
m_plotOpts.SetScale( 1 );
switch( m_plotOpts.GetScaleSelection() )
{
default:
break;
case 0: // Autoscale option
m_plotOpts.SetAutoScale( true );
break;
case 2: // 3:2 option
m_plotOpts.SetScale( 1.5 );
break;
case 3: // 2:1 option
m_plotOpts.SetScale( 2 );
break;
case 4: // 3:1 option
m_plotOpts.SetScale( 3 );
break;
}
/* If the scale factor edit controls are disabled or the scale value
* is 0, don't adjust the base scale factor. This fixes a bug when
* the default scale adjust is initialized to 0 and saved in program
* settings resulting in a divide by zero fault.
*/
if( m_fineAdjustXscaleOpt->IsEnabled() && m_XScaleAdjust != 0.0 )
m_plotOpts.SetFineScaleAdjustX( m_XScaleAdjust );
if( m_fineAdjustYscaleOpt->IsEnabled() && m_YScaleAdjust != 0.0 )
m_plotOpts.SetFineScaleAdjustY( m_YScaleAdjust );
if( m_PSFineAdjustWidthOpt->IsEnabled() )
m_plotOpts.SetWidthAdjust( m_PSWidthAdjust );
wxString file_ext( GetDefaultPlotExtension( m_plotOpts.GetFormat() ) );
// Test for a reasonable scale value
// XXX could this actually happen? isn't it constrained in the apply
// function?
if( m_plotOpts.GetScale() < PLOT_MIN_SCALE )
DisplayInfoMessage( this,
_( "Warning: Scale option set to a very small value" ) );
if( m_plotOpts.GetScale() > PLOT_MAX_SCALE )
DisplayInfoMessage( this,
_( "Warning: Scale option set to a very large value" ) );
GERBER_JOBFILE_WRITER jobfile_writer( m_board, &reporter );
// Save the current plot options in the board
m_parent->SetPlotSettings( m_plotOpts );
wxBusyCursor dummy;
for( LSEQ seq = m_plotOpts.GetLayerSelection().UIOrder(); seq; ++seq )
{
PCB_LAYER_ID layer = *seq;
// All copper layers that are disabled are actually selected
// This is due to wonkyness in automatically selecting copper layers
// for plotting when adding more than two layers to a board.
// If plot options become accessible to the layers setup dialog
// please move this functionality there!
// This skips a copper layer if it is actually disabled on the board.
if( ( LSET::AllCuMask() & ~m_board->GetEnabledLayers() )[layer] )
continue;
// Pick the basename from the board file
wxFileName fn( boardFilename );
// Use Gerber Extensions based on layer number
// (See http://en.wikipedia.org/wiki/Gerber_File)
if( m_plotOpts.GetFormat() == PLOT_FORMAT_GERBER && m_useGerberExtensions->GetValue() )
file_ext = GetGerberProtelExtension( layer );
BuildPlotFileName( &fn, outputDir.GetPath(), m_board->GetLayerName( layer ), file_ext );
wxString fullname = fn.GetFullName();
jobfile_writer.AddGbrFile( layer, fullname );
LOCALE_IO toggle;
BOARD* board = m_parent->GetBoard();
PLOTTER* plotter = StartPlotBoard( board, &m_plotOpts, layer, fn.GetFullPath(), wxEmptyString );
// Print diags in messages box:
wxString msg;
if( plotter )
{
PlotOneBoardLayer( board, plotter, layer, m_plotOpts );
plotter->EndPlot();
delete plotter;
msg.Printf( _( "Plot file \"%s\" created." ), GetChars( fn.GetFullPath() ) );
reporter.Report( msg, REPORTER::RPT_ACTION );
}
else
{
msg.Printf( _( "Unable to create file \"%s\"." ), GetChars( fn.GetFullPath() ) );
reporter.Report( msg, REPORTER::RPT_ERROR );
}
}
if( m_plotOpts.GetFormat() == PLOT_FORMAT_GERBER && m_plotOpts.GetCreateGerberJobFile() )
{
// Pick the basename from the board file
wxFileName fn( boardFilename );
// Build gerber job file from basename
BuildPlotFileName( &fn, outputDir.GetPath(), "job", GerberJobFileExtension );
jobfile_writer.CreateJobFile( fn.GetFullPath() );
}
}
bool GENDRILL_WRITER_BASE::genDrillMapFile( const wxString& aFullFileName,
PlotFormat aFormat )
{
// Remark:
// Hole list must be created before calling this function, by buildHolesList(),
// for the right holes set (PTH, NPTH, buried/blind vias ...)
double scale = 1.0;
wxPoint offset;
PLOTTER* plotter = NULL;
PAGE_INFO dummy( PAGE_INFO::A4, false );
PCB_PLOT_PARAMS plot_opts; // starts plotting with default options
LOCALE_IO toggle; // use standard C notation for float numbers
const PAGE_INFO& page_info = m_pageInfo ? *m_pageInfo : dummy;
// Calculate dimensions and center of PCB
EDA_RECT bbbox = m_pcb->GetBoardEdgesBoundingBox();
// Calculate the scale for the format type, scale 1 in HPGL, drawing on
// an A4 sheet in PS, + text description of symbols
switch( aFormat )
{
case PLOT_FORMAT_GERBER:
offset = GetOffset();
plotter = new GERBER_PLOTTER();
plotter->SetViewport( offset, IU_PER_MILS/10, scale, false );
plotter->SetGerberCoordinatesFormat( 5 ); // format x.5 unit = mm
break;
case PLOT_FORMAT_HPGL: // Scale for HPGL format.
{
HPGL_PLOTTER* hpgl_plotter = new HPGL_PLOTTER;
plotter = hpgl_plotter;
hpgl_plotter->SetPenNumber( plot_opts.GetHPGLPenNum() );
hpgl_plotter->SetPenSpeed( plot_opts.GetHPGLPenSpeed() );
plotter->SetPageSettings( page_info );
plotter->SetViewport( offset, IU_PER_MILS/10, scale, false );
}
break;
default:
wxASSERT( false );
// fall through
case PLOT_FORMAT_PDF:
case PLOT_FORMAT_POST:
{
PAGE_INFO pageA4( wxT( "A4" ) );
wxSize pageSizeIU = pageA4.GetSizeIU();
// Reserve a margin around the page.
int margin = KiROUND( 20 * IU_PER_MM );
// Calculate a scaling factor to print the board on the sheet
double Xscale = double( pageSizeIU.x - ( 2 * margin ) ) / bbbox.GetWidth();
// We should print the list of drill sizes, so reserve room for it
// 60% height for board 40% height for list
int ypagesize_for_board = KiROUND( pageSizeIU.y * 0.6 );
double Yscale = double( ypagesize_for_board - margin ) / bbbox.GetHeight();
scale = std::min( Xscale, Yscale );
// Experience shows the scale should not to large, because texts
// create problem (can be to big or too small).
// So the scale is clipped at 3.0;
scale = std::min( scale, 3.0 );
offset.x = KiROUND( double( bbbox.Centre().x ) -
( pageSizeIU.x / 2.0 ) / scale );
offset.y = KiROUND( double( bbbox.Centre().y ) -
( ypagesize_for_board / 2.0 ) / scale );
if( aFormat == PLOT_FORMAT_PDF )
plotter = new PDF_PLOTTER;
else
plotter = new PS_PLOTTER;
plotter->SetPageSettings( pageA4 );
plotter->SetViewport( offset, IU_PER_MILS/10, scale, false );
}
break;
case PLOT_FORMAT_DXF:
{
DXF_PLOTTER* dxf_plotter = new DXF_PLOTTER;
plotter = dxf_plotter;
plotter->SetPageSettings( page_info );
plotter->SetViewport( offset, IU_PER_MILS/10, scale, false );
}
break;
case PLOT_FORMAT_SVG:
{
SVG_PLOTTER* svg_plotter = new SVG_PLOTTER;
plotter = svg_plotter;
plotter->SetPageSettings( page_info );
plotter->SetViewport( offset, IU_PER_MILS/10, scale, false );
}
break;
}
plotter->SetCreator( wxT( "PCBNEW" ) );
plotter->SetDefaultLineWidth( 5 * IU_PER_MILS );
plotter->SetColorMode( false );
if( ! plotter->OpenFile( aFullFileName ) )
{
delete plotter;
return false;
}
plotter->StartPlot();
// Draw items on edge layer (not all, only items useful for drill map
BRDITEMS_PLOTTER itemplotter( plotter, m_pcb, plot_opts );
itemplotter.SetLayerSet( Edge_Cuts );
for( auto PtStruct : m_pcb->Drawings() )
{
switch( PtStruct->Type() )
{
case PCB_LINE_T:
itemplotter.PlotDrawSegment( (DRAWSEGMENT*) PtStruct );
break;
case PCB_TEXT_T:
itemplotter.PlotTextePcb( (TEXTE_PCB*) PtStruct );
break;
case PCB_DIMENSION_T:
case PCB_TARGET_T:
case PCB_MARKER_T: // do not draw
default:
break;
}
}
int x, y;
int plotX, plotY, TextWidth;
int intervalle = 0;
char line[1024];
wxString msg;
int textmarginaftersymbol = KiROUND( 2 * IU_PER_MM );
// Set Drill Symbols width
plotter->SetDefaultLineWidth( 0.2 * IU_PER_MM / scale );
plotter->SetCurrentLineWidth( -1 );
// Plot board outlines and drill map
plotDrillMarks( plotter );
// Print a list of symbols used.
int charSize = 3 * IU_PER_MM; // text size in IUs
double charScale = 1.0 / scale; // real scale will be 1/scale,
// because the global plot scale is scale
TextWidth = KiROUND( (charSize * charScale) / 10.0 ); // Set text width (thickness)
intervalle = KiROUND( charSize * charScale ) + TextWidth;
// Trace information.
plotX = KiROUND( bbbox.GetX() + textmarginaftersymbol * charScale );
plotY = bbbox.GetBottom() + intervalle;
// Plot title "Info"
wxString Text = wxT( "Drill Map:" );
plotter->Text( wxPoint( plotX, plotY ), COLOR4D::UNSPECIFIED, Text, 0,
wxSize( KiROUND( charSize * charScale ),
KiROUND( charSize * charScale ) ),
GR_TEXT_HJUSTIFY_LEFT, GR_TEXT_VJUSTIFY_CENTER,
TextWidth, false, false );
for( unsigned ii = 0; ii < m_toolListBuffer.size(); ii++ )
{
DRILL_TOOL& tool = m_toolListBuffer[ii];
if( tool.m_TotalCount == 0 )
continue;
plotY += intervalle;
int plot_diam = KiROUND( tool.m_Diameter );
x = KiROUND( plotX - textmarginaftersymbol * charScale - plot_diam / 2.0 );
y = KiROUND( plotY + charSize * charScale );
plotter->Marker( wxPoint( x, y ), plot_diam, ii );
// List the diameter of each drill in mm and inches.
sprintf( line, "%2.2fmm / %2.3f\" ",
diameter_in_mm( tool.m_Diameter ),
diameter_in_inches( tool.m_Diameter ) );
msg = FROM_UTF8( line );
// Now list how many holes and ovals are associated with each drill.
if( ( tool.m_TotalCount == 1 )
&& ( tool.m_OvalCount == 0 ) )
sprintf( line, "(1 hole)" );
else if( tool.m_TotalCount == 1 ) // && ( toolm_OvalCount == 1 )
sprintf( line, "(1 slot)" );
else if( tool.m_OvalCount == 0 )
sprintf( line, "(%d holes)", tool.m_TotalCount );
else if( tool.m_OvalCount == 1 )
sprintf( line, "(%d holes + 1 slot)", tool.m_TotalCount - 1 );
else // if ( toolm_OvalCount > 1 )
sprintf( line, "(%d holes + %d slots)",
tool.m_TotalCount - tool.m_OvalCount,
tool.m_OvalCount );
msg += FROM_UTF8( line );
if( tool.m_Hole_NotPlated )
msg += wxT( " (not plated)" );
plotter->Text( wxPoint( plotX, y ), COLOR4D::UNSPECIFIED, msg, 0,
wxSize( KiROUND( charSize * charScale ),
KiROUND( charSize * charScale ) ),
GR_TEXT_HJUSTIFY_LEFT, GR_TEXT_VJUSTIFY_CENTER,
TextWidth, false, false );
intervalle = KiROUND( ( ( charSize * charScale ) + TextWidth ) * 1.2 );
if( intervalle < ( plot_diam + ( 1 * IU_PER_MM / scale ) + TextWidth ) )
intervalle = plot_diam + ( 1 * IU_PER_MM / scale ) + TextWidth;
}
plotter->EndPlot();
delete plotter;
return true;
}