Ejemplo n.º 1
0
void
nsTextControlFrame::Reflow(nsPresContext*   aPresContext,
                           ReflowOutput&     aDesiredSize,
                           const ReflowInput& aReflowInput,
                           nsReflowStatus&          aStatus)
{
  MarkInReflow();
  DO_GLOBAL_REFLOW_COUNT("nsTextControlFrame");
  DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);

  // make sure that the form registers itself on the initial/first reflow
  if (mState & NS_FRAME_FIRST_REFLOW) {
    nsFormControlFrame::RegUnRegAccessKey(this, true);
  }

  // set values of reflow's out parameters
  WritingMode wm = aReflowInput.GetWritingMode();
  LogicalSize
    finalSize(wm,
              aReflowInput.ComputedISize() +
              aReflowInput.ComputedLogicalBorderPadding().IStartEnd(wm),
              aReflowInput.ComputedBSize() +
              aReflowInput.ComputedLogicalBorderPadding().BStartEnd(wm));
  aDesiredSize.SetSize(wm, finalSize);

  // computation of the ascent wrt the input height
  nscoord lineHeight = aReflowInput.ComputedBSize();
  float inflation = nsLayoutUtils::FontSizeInflationFor(this);
  if (!IsSingleLineTextControl()) {
    lineHeight = ReflowInput::CalcLineHeight(GetContent(), StyleContext(),
                                                   NS_AUTOHEIGHT, inflation);
  }
  RefPtr<nsFontMetrics> fontMet =
    nsLayoutUtils::GetFontMetricsForFrame(this, inflation);
  // now adjust for our borders and padding
  aDesiredSize.SetBlockStartAscent(
    nsLayoutUtils::GetCenteredFontBaseline(fontMet, lineHeight,
                                           wm.IsLineInverted()) +
    aReflowInput.ComputedLogicalBorderPadding().BStart(wm));

  // overflow handling
  aDesiredSize.SetOverflowAreasToDesiredBounds();
  // perform reflow on all kids
  nsIFrame* kid = mFrames.FirstChild();
  while (kid) {
    ReflowTextControlChild(kid, aPresContext, aReflowInput, aStatus, aDesiredSize);
    kid = kid->GetNextSibling();
  }

  // take into account css properties that affect overflow handling
  FinishAndStoreOverflow(&aDesiredSize);

  aStatus = NS_FRAME_COMPLETE;
  NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
void
nsSVGForeignObjectFrame::Reflow(nsPresContext*           aPresContext,
                                ReflowOutput&     aDesiredSize,
                                const ReflowInput& aReflowInput,
                                nsReflowStatus&          aStatus)
{
  MOZ_ASSERT(!(GetStateBits() & NS_FRAME_IS_NONDISPLAY),
             "Should not have been called");

  // Only InvalidateAndScheduleBoundsUpdate marks us with NS_FRAME_IS_DIRTY,
  // so if that bit is still set we still have a resize pending. If we hit
  // this assertion, then we should get the presShell to skip reflow roots
  // that have a dirty parent since a reflow is going to come via the
  // reflow root's parent anyway.
  NS_ASSERTION(!(GetStateBits() & NS_FRAME_IS_DIRTY),
               "Reflowing while a resize is pending is wasteful");

  // ReflowSVG makes sure mRect is up to date before we're called.

  NS_ASSERTION(!aReflowInput.mParentReflowInput,
               "should only get reflow from being reflow root");
  NS_ASSERTION(aReflowInput.ComputedWidth() == GetSize().width &&
               aReflowInput.ComputedHeight() == GetSize().height,
               "reflow roots should be reflowed at existing size and "
               "svg.css should ensure we have no padding/border/margin");

  DoReflow();

  WritingMode wm = aReflowInput.GetWritingMode();
  LogicalSize finalSize(wm, aReflowInput.ComputedISize(),
                        aReflowInput.ComputedBSize());
  aDesiredSize.SetSize(wm, finalSize);
  aDesiredSize.SetOverflowAreasToDesiredBounds();
  aStatus = NS_FRAME_COMPLETE;
}
Ejemplo n.º 3
0
/* virtual */ void
nsBackdropFrame::Reflow(nsPresContext* aPresContext,
                        ReflowOutput& aDesiredSize,
                        const ReflowInput& aReflowInput,
                        nsReflowStatus& aStatus)
{
  MarkInReflow();
  DO_GLOBAL_REFLOW_COUNT("nsBackdropFrame");
  DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);

  // Note that this frame is a child of the viewport frame.
  WritingMode wm = aReflowInput.GetWritingMode();
  LogicalMargin borderPadding = aReflowInput.ComputedLogicalBorderPadding();
  nscoord isize = aReflowInput.ComputedISize() + borderPadding.IStartEnd(wm);
  nscoord bsize = aReflowInput.ComputedBSize() + borderPadding.BStartEnd(wm);
  aDesiredSize.SetSize(wm, LogicalSize(wm, isize, bsize));
  aStatus = NS_FRAME_COMPLETE;
}
Ejemplo n.º 4
0
nscoord
nsSplittableFrame::GetEffectiveComputedBSize(const ReflowInput& aReflowInput,
                                              nscoord aConsumedBSize) const
{
  nscoord bSize = aReflowInput.ComputedBSize();
  if (bSize == NS_INTRINSICSIZE) {
    return NS_INTRINSICSIZE;
  }

  if (aConsumedBSize == NS_INTRINSICSIZE) {
    aConsumedBSize = ConsumedBSize(aReflowInput.GetWritingMode());
  }

  bSize -= aConsumedBSize;

  // We may have stretched the frame beyond its computed height. Oh well.
  return std::max(0, bSize);
}
void
nsSimplePageSequenceFrame::SetDesiredSize(ReflowOutput& aDesiredSize,
                                          const ReflowInput& aReflowInput,
                                          nscoord aWidth,
                                          nscoord aHeight)
{
  // Aim to fill the whole size of the document, not only so we
  // can act as a background in print preview but also handle overflow
  // in child page frames correctly.
  // Use availableISize so we don't cause a needless horizontal scrollbar.
  WritingMode wm = aReflowInput.GetWritingMode();
  nscoord scaledWidth = aWidth * PresContext()->GetPrintPreviewScale();
  nscoord scaledHeight = aHeight * PresContext()->GetPrintPreviewScale();

  nscoord scaledISize = (wm.IsVertical() ? scaledHeight : scaledWidth);
  nscoord scaledBSize = (wm.IsVertical() ? scaledWidth : scaledHeight);

  aDesiredSize.ISize(wm) = std::max(scaledISize, aReflowInput.AvailableISize());
  aDesiredSize.BSize(wm) = std::max(scaledBSize, aReflowInput.ComputedBSize());
}
// Helper-function that lets us clone the button's reflow state, but with its
// ComputedWidth and ComputedHeight reduced by the amount of renderer-specific
// focus border and padding that we're using. (This lets us provide a more
// appropriate content-box size for descendents' percent sizes to resolve
// against.)
static ReflowInput
CloneReflowInputWithReducedContentBox(
  const ReflowInput& aButtonReflowInput,
  const LogicalMargin& aFocusPadding)
{
  auto wm = aButtonReflowInput.GetWritingMode();
  nscoord adjustedISize = aButtonReflowInput.ComputedISize();
  adjustedISize -= aFocusPadding.IStartEnd(wm);
  adjustedISize = std::max(0, adjustedISize);

  // (Only adjust the block-size if it's an actual length.)
  nscoord adjustedBSize = aButtonReflowInput.ComputedBSize();
  if (adjustedBSize != NS_INTRINSICSIZE) {
    adjustedBSize -= aFocusPadding.BStartEnd(wm);
    adjustedBSize = std::max(0, adjustedBSize);
  }

  ReflowInput clone(aButtonReflowInput);
  clone.SetComputedISize(adjustedISize);
  clone.SetComputedBSize(adjustedBSize);

  return clone;
}
Ejemplo n.º 7
0
void
ViewportFrame::Reflow(nsPresContext*           aPresContext,
                      ReflowOutput&     aDesiredSize,
                      const ReflowInput& aReflowInput,
                      nsReflowStatus&          aStatus)
{
  MarkInReflow();
  DO_GLOBAL_REFLOW_COUNT("ViewportFrame");
  DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
  NS_FRAME_TRACE_REFLOW_IN("ViewportFrame::Reflow");

  // Initialize OUT parameters
  aStatus = NS_FRAME_COMPLETE;

  // Because |Reflow| sets ComputedBSize() on the child to our
  // ComputedBSize().
  AddStateBits(NS_FRAME_CONTAINS_RELATIVE_BSIZE);

  // Set our size up front, since some parts of reflow depend on it
  // being already set.  Note that the computed height may be
  // unconstrained; that's ok.  Consumers should watch out for that.
  SetSize(nsSize(aReflowInput.ComputedWidth(), aReflowInput.ComputedHeight()));

  // Reflow the main content first so that the placeholders of the
  // fixed-position frames will be in the right places on an initial
  // reflow.
  nscoord kidBSize = 0;
  WritingMode wm = aReflowInput.GetWritingMode();

  if (mFrames.NotEmpty()) {
    // Deal with a non-incremental reflow or an incremental reflow
    // targeted at our one-and-only principal child frame.
    if (aReflowInput.ShouldReflowAllKids() ||
        aReflowInput.IsBResize() ||
        NS_SUBTREE_DIRTY(mFrames.FirstChild())) {
      // Reflow our one-and-only principal child frame
      nsIFrame*           kidFrame = mFrames.FirstChild();
      ReflowOutput kidDesiredSize(aReflowInput);
      WritingMode         wm = kidFrame->GetWritingMode();
      LogicalSize         availableSpace = aReflowInput.AvailableSize(wm);
      ReflowInput   kidReflowInput(aPresContext, aReflowInput,
                                         kidFrame, availableSpace);

      // Reflow the frame
      kidReflowInput.SetComputedBSize(aReflowInput.ComputedBSize());
      ReflowChild(kidFrame, aPresContext, kidDesiredSize, kidReflowInput,
                  0, 0, 0, aStatus);
      kidBSize = kidDesiredSize.BSize(wm);

      FinishReflowChild(kidFrame, aPresContext, kidDesiredSize, nullptr, 0, 0, 0);
    } else {
      kidBSize = LogicalSize(wm, mFrames.FirstChild()->GetSize()).BSize(wm);
    }
  }

  NS_ASSERTION(aReflowInput.AvailableISize() != NS_UNCONSTRAINEDSIZE,
               "shouldn't happen anymore");

  // Return the max size as our desired size
  LogicalSize maxSize(wm, aReflowInput.AvailableISize(),
                      // Being flowed initially at an unconstrained block size
                      // means we should return our child's intrinsic size.
                      aReflowInput.ComputedBSize() != NS_UNCONSTRAINEDSIZE
                        ? aReflowInput.ComputedBSize()
                        : kidBSize);
  aDesiredSize.SetSize(wm, maxSize);
  aDesiredSize.SetOverflowAreasToDesiredBounds();

  if (HasAbsolutelyPositionedChildren()) {
    // Make a copy of the reflow state and change the computed width and height
    // to reflect the available space for the fixed items
    ReflowInput reflowInput(aReflowInput);

    if (reflowInput.AvailableBSize() == NS_UNCONSTRAINEDSIZE) {
      // We have an intrinsic-height document with abs-pos/fixed-pos children.
      // Set the available height and mComputedHeight to our chosen height.
      reflowInput.AvailableBSize() = maxSize.BSize(wm);
      // Not having border/padding simplifies things
      NS_ASSERTION(reflowInput.ComputedPhysicalBorderPadding() == nsMargin(0,0,0,0),
                   "Viewports can't have border/padding");
      reflowInput.SetComputedBSize(maxSize.BSize(wm));
    }

    nsRect rect = AdjustReflowInputAsContainingBlock(&reflowInput);
    nsOverflowAreas* overflowAreas = &aDesiredSize.mOverflowAreas;
    nsIScrollableFrame* rootScrollFrame =
                    aPresContext->PresShell()->GetRootScrollFrameAsScrollable();
    if (rootScrollFrame && !rootScrollFrame->IsIgnoringViewportClipping()) {
      overflowAreas = nullptr;
    }
    AbsPosReflowFlags flags =
      AbsPosReflowFlags::eCBWidthAndHeightChanged; // XXX could be optimized
    GetAbsoluteContainingBlock()->Reflow(this, aPresContext, reflowInput, aStatus,
                                         rect, flags, overflowAreas);
  }

  if (mFrames.NotEmpty()) {
    ConsiderChildOverflow(aDesiredSize.mOverflowAreas, mFrames.FirstChild());
  }

  // If we were dirty then do a repaint
  if (GetStateBits() & NS_FRAME_IS_DIRTY) {
    InvalidateFrame();
  }

  // Clipping is handled by the document container (e.g., nsSubDocumentFrame),
  // so we don't need to change our overflow areas.
  bool overflowChanged = FinishAndStoreOverflow(&aDesiredSize);
  if (overflowChanged) {
    // We may need to alert our container to get it to pick up the
    // overflow change.
    nsSubDocumentFrame* container = static_cast<nsSubDocumentFrame*>
      (nsLayoutUtils::GetCrossDocParentFrame(this));
    if (container && !container->ShouldClipSubdocument()) {
      container->PresContext()->PresShell()->
        FrameNeedsReflow(container, nsIPresShell::eResize, NS_FRAME_IS_DIRTY);
    }
  }

  NS_FRAME_TRACE_REFLOW_OUT("ViewportFrame::Reflow", aStatus);
  NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
Ejemplo n.º 8
0
void
nsNumberControlFrame::Reflow(nsPresContext* aPresContext,
                             ReflowOutput& aDesiredSize,
                             const ReflowInput& aReflowInput,
                             nsReflowStatus& aStatus)
{
  MarkInReflow();
  DO_GLOBAL_REFLOW_COUNT("nsNumberControlFrame");
  DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);

  NS_ASSERTION(mOuterWrapper, "Outer wrapper div must exist!");

  NS_ASSERTION(!GetPrevContinuation() && !GetNextContinuation(),
               "nsNumberControlFrame should not have continuations; if it does we "
               "need to call RegUnregAccessKey only for the first");

  NS_ASSERTION(!mFrames.FirstChild() ||
               !mFrames.FirstChild()->GetNextSibling(),
               "We expect at most one direct child frame");

  if (mState & NS_FRAME_FIRST_REFLOW) {
    nsFormControlFrame::RegUnRegAccessKey(this, true);
  }

  const WritingMode myWM = aReflowInput.GetWritingMode();

  // The ISize of our content box, which is the available ISize
  // for our anonymous content:
  const nscoord contentBoxISize = aReflowInput.ComputedISize();
  nscoord contentBoxBSize = aReflowInput.ComputedBSize();

  // Figure out our border-box sizes as well (by adding borderPadding to
  // content-box sizes):
  const nscoord borderBoxISize = contentBoxISize +
    aReflowInput.ComputedLogicalBorderPadding().IStartEnd(myWM);

  nscoord borderBoxBSize;
  if (contentBoxBSize != NS_INTRINSICSIZE) {
    borderBoxBSize = contentBoxBSize +
      aReflowInput.ComputedLogicalBorderPadding().BStartEnd(myWM);
  } // else, we'll figure out borderBoxBSize after we resolve contentBoxBSize.

  nsIFrame* outerWrapperFrame = mOuterWrapper->GetPrimaryFrame();

  if (!outerWrapperFrame) { // display:none?
    if (contentBoxBSize == NS_INTRINSICSIZE) {
      contentBoxBSize = 0;
      borderBoxBSize =
        aReflowInput.ComputedLogicalBorderPadding().BStartEnd(myWM);
    }
  } else {
    NS_ASSERTION(outerWrapperFrame == mFrames.FirstChild(), "huh?");

    ReflowOutput wrappersDesiredSize(aReflowInput);

    WritingMode wrapperWM = outerWrapperFrame->GetWritingMode();
    LogicalSize availSize = aReflowInput.ComputedSize(wrapperWM);
    availSize.BSize(wrapperWM) = NS_UNCONSTRAINEDSIZE;

    ReflowInput wrapperReflowInput(aPresContext, aReflowInput,
                                         outerWrapperFrame, availSize);

    // Convert wrapper margin into my own writing-mode (in case it differs):
    LogicalMargin wrapperMargin =
      wrapperReflowInput.ComputedLogicalMargin().ConvertTo(myWM, wrapperWM);

    // offsets of wrapper frame within this frame:
    LogicalPoint
      wrapperOffset(myWM,
                    aReflowInput.ComputedLogicalBorderPadding().IStart(myWM) +
                    wrapperMargin.IStart(myWM),
                    aReflowInput.ComputedLogicalBorderPadding().BStart(myWM) +
                    wrapperMargin.BStart(myWM));

    nsReflowStatus childStatus;
    // We initially reflow the child with a dummy containerSize; positioning
    // will be fixed later.
    const nsSize dummyContainerSize;
    ReflowChild(outerWrapperFrame, aPresContext, wrappersDesiredSize,
                wrapperReflowInput, myWM, wrapperOffset, dummyContainerSize, 0,
                childStatus);
    MOZ_ASSERT(NS_FRAME_IS_FULLY_COMPLETE(childStatus),
               "We gave our child unconstrained available block-size, "
               "so it should be complete");

    nscoord wrappersMarginBoxBSize =
      wrappersDesiredSize.BSize(myWM) + wrapperMargin.BStartEnd(myWM);

    if (contentBoxBSize == NS_INTRINSICSIZE) {
      // We are intrinsically sized -- we should shrinkwrap the outer wrapper's
      // block-size:
      contentBoxBSize = wrappersMarginBoxBSize;

      // Make sure we obey min/max-bsize in the case when we're doing intrinsic
      // sizing (we get it for free when we have a non-intrinsic
      // aReflowInput.ComputedBSize()).  Note that we do this before
      // adjusting for borderpadding, since ComputedMaxBSize and
      // ComputedMinBSize are content heights.
      contentBoxBSize =
        NS_CSS_MINMAX(contentBoxBSize,
                      aReflowInput.ComputedMinBSize(),
                      aReflowInput.ComputedMaxBSize());

      borderBoxBSize = contentBoxBSize +
        aReflowInput.ComputedLogicalBorderPadding().BStartEnd(myWM);
    }

    // Center child in block axis
    nscoord extraSpace = contentBoxBSize - wrappersMarginBoxBSize;
    wrapperOffset.B(myWM) += std::max(0, extraSpace / 2);

    // Needed in FinishReflowChild, for logical-to-physical conversion:
    nsSize borderBoxSize = LogicalSize(myWM, borderBoxISize, borderBoxBSize).
                           GetPhysicalSize(myWM);

    // Place the child
    FinishReflowChild(outerWrapperFrame, aPresContext, wrappersDesiredSize,
                      &wrapperReflowInput, myWM, wrapperOffset,
                      borderBoxSize, 0);

    nsSize contentBoxSize =
      LogicalSize(myWM, contentBoxISize, contentBoxBSize).
        GetPhysicalSize(myWM);
    aDesiredSize.SetBlockStartAscent(
       wrappersDesiredSize.BlockStartAscent() +
       outerWrapperFrame->BStart(aReflowInput.GetWritingMode(),
                                 contentBoxSize));
  }

  LogicalSize logicalDesiredSize(myWM, borderBoxISize, borderBoxBSize);
  aDesiredSize.SetSize(myWM, logicalDesiredSize);

  aDesiredSize.SetOverflowAreasToDesiredBounds();

  if (outerWrapperFrame) {
    ConsiderChildOverflow(aDesiredSize.mOverflowAreas, outerWrapperFrame);
  }

  FinishAndStoreOverflow(&aDesiredSize);

  aStatus = NS_FRAME_COMPLETE;

  NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
Ejemplo n.º 9
0
bool
nsColumnSetFrame::ReflowChildren(ReflowOutput&     aDesiredSize,
                                 const ReflowInput& aReflowInput,
                                 nsReflowStatus&          aStatus,
                                 const ReflowConfig&      aConfig,
                                 bool                     aUnboundedLastColumn,
                                 nsCollapsingMargin*      aCarriedOutBEndMargin,
                                 ColumnBalanceData&       aColData)
{
  aColData.Reset();
  bool allFit = true;
  WritingMode wm = GetWritingMode();
  bool isVertical = wm.IsVertical();
  bool isRTL = !wm.IsBidiLTR();
  bool shrinkingBSizeOnly = !NS_SUBTREE_DIRTY(this) &&
    mLastBalanceBSize > aConfig.mColMaxBSize;

#ifdef DEBUG_roc
  printf("*** Doing column reflow pass: mLastBalanceBSize=%d, mColMaxBSize=%d, RTL=%d\n"
         "    mBalanceColCount=%d, mColISize=%d, mColGap=%d\n",
         mLastBalanceBSize, aConfig.mColMaxBSize, isRTL, aConfig.mBalanceColCount,
         aConfig.mColISize, aConfig.mColGap);
#endif

  DrainOverflowColumns();

  const bool colBSizeChanged = mLastBalanceBSize != aConfig.mColMaxBSize;

  if (colBSizeChanged) {
    mLastBalanceBSize = aConfig.mColMaxBSize;
    // XXX Seems like this could fire if incremental reflow pushed the column set
    // down so we reflow incrementally with a different available height.
    // We need a way to do an incremental reflow and be sure availableHeight
    // changes are taken account of! Right now I think block frames with absolute
    // children might exit early.
    //NS_ASSERTION(aKidReason != eReflowReason_Incremental,
    //             "incremental reflow should not have changed the balance height");
  }

  // get our border and padding
  LogicalMargin borderPadding = aReflowInput.ComputedLogicalBorderPadding();
  borderPadding.ApplySkipSides(GetLogicalSkipSides(&aReflowInput));

  nsRect contentRect(0, 0, 0, 0);
  nsOverflowAreas overflowRects;

  nsIFrame* child = mFrames.FirstChild();
  LogicalPoint childOrigin(wm, borderPadding.IStart(wm),
                           borderPadding.BStart(wm));
  // In vertical-rl mode, columns will not be correctly placed if the
  // reflowInput's ComputedWidth() is UNCONSTRAINED (in which case we'll get
  // a containerSize.width of zero here). In that case, the column positions
  // will be adjusted later, after our correct contentSize is known.
  nsSize containerSize = aReflowInput.ComputedSizeAsContainerIfConstrained();

  // For RTL, since the columns might not fill the frame exactly, we
  // need to account for the slop. Otherwise we'll waste time moving the
  // columns by some tiny amount

  // XXX when all of layout is converted to logical coordinates, we
  //     probably won't need to do this hack any more. For now, we
  //     confine it to the legacy horizontal-rl case
  if (!isVertical && isRTL) {
    nscoord availISize = aReflowInput.AvailableISize();
    if (aReflowInput.ComputedISize() != NS_INTRINSICSIZE) {
      availISize = aReflowInput.ComputedISize();
    }
    if (availISize != NS_INTRINSICSIZE) {
      childOrigin.I(wm) = containerSize.width - borderPadding.Left(wm) -
                          availISize;
#ifdef DEBUG_roc
      printf("*** childOrigin.iCoord = %d\n", childOrigin.I(wm));
#endif
    }
  }

  int columnCount = 0;
  int contentBEnd = 0;
  bool reflowNext = false;

  while (child) {
    // Try to skip reflowing the child. We can't skip if the child is dirty. We also can't
    // skip if the next column is dirty, because the next column's first line(s)
    // might be pullable back to this column. We can't skip if it's the last child
    // because we need to obtain the bottom margin. We can't skip
    // if this is the last column and we're supposed to assign unbounded
    // height to it, because that could change the available height from
    // the last time we reflowed it and we should try to pull all the
    // content from its next sibling. (Note that it might be the last
    // column, but not be the last child because the desired number of columns
    // has changed.)
    bool skipIncremental = !aReflowInput.ShouldReflowAllKids()
      && !NS_SUBTREE_DIRTY(child)
      && child->GetNextSibling()
      && !(aUnboundedLastColumn && columnCount == aConfig.mBalanceColCount - 1)
      && !NS_SUBTREE_DIRTY(child->GetNextSibling());
    // If we need to pull up content from the prev-in-flow then this is not just
    // a height shrink. The prev in flow will have set the dirty bit.
    // Check the overflow rect YMost instead of just the child's content height. The child
    // may have overflowing content that cares about the available height boundary.
    // (It may also have overflowing content that doesn't care about the available height
    // boundary, but if so, too bad, this optimization is defeated.)
    // We want scrollable overflow here since this is a calculation that
    // affects layout.
    bool skipResizeBSizeShrink = false;
    if (shrinkingBSizeOnly) {
      switch (wm.GetBlockDir()) {
      case WritingMode::eBlockTB:
        if (child->GetScrollableOverflowRect().YMost() <= aConfig.mColMaxBSize) {
          skipResizeBSizeShrink = true;
        }
        break;
      case WritingMode::eBlockLR:
        if (child->GetScrollableOverflowRect().XMost() <= aConfig.mColMaxBSize) {
          skipResizeBSizeShrink = true;
        }
        break;
      case WritingMode::eBlockRL:
        // XXX not sure how to handle this, so for now just don't attempt
        // the optimization
        break;
      default:
        NS_NOTREACHED("unknown block direction");
        break;
      }
    }

    nscoord childContentBEnd = 0;
    if (!reflowNext && (skipIncremental || skipResizeBSizeShrink)) {
      // This child does not need to be reflowed, but we may need to move it
      MoveChildTo(child, childOrigin, wm, containerSize);

      // If this is the last frame then make sure we get the right status
      nsIFrame* kidNext = child->GetNextSibling();
      if (kidNext) {
        aStatus = (kidNext->GetStateBits() & NS_FRAME_IS_OVERFLOW_CONTAINER)
                  ? NS_FRAME_OVERFLOW_INCOMPLETE
                  : NS_FRAME_NOT_COMPLETE;
      } else {
        aStatus = mLastFrameStatus;
      }
      childContentBEnd = nsLayoutUtils::CalculateContentBEnd(wm, child);
#ifdef DEBUG_roc
      printf("*** Skipping child #%d %p (incremental %d, resize block-size shrink %d): status = %d\n",
             columnCount, (void*)child, skipIncremental, skipResizeBSizeShrink, aStatus);
#endif
    } else {
      LogicalSize availSize(wm, aConfig.mColISize, aConfig.mColMaxBSize);
      if (aUnboundedLastColumn && columnCount == aConfig.mBalanceColCount - 1) {
        availSize.BSize(wm) = GetAvailableContentBSize(aReflowInput);
      }

      LogicalSize computedSize = aReflowInput.ComputedSize(wm);

      if (reflowNext)
        child->AddStateBits(NS_FRAME_IS_DIRTY);

      LogicalSize kidCBSize(wm, availSize.ISize(wm), computedSize.BSize(wm));
      ReflowInput kidReflowInput(PresContext(), aReflowInput, child,
                                       availSize, &kidCBSize);
      kidReflowInput.mFlags.mIsTopOfPage = true;
      kidReflowInput.mFlags.mTableIsSplittable = false;
      kidReflowInput.mFlags.mIsColumnBalancing = aConfig.mBalanceColCount < INT32_MAX;

      // We need to reflow any float placeholders, even if our column height
      // hasn't changed.
      kidReflowInput.mFlags.mMustReflowPlaceholders = !colBSizeChanged;

#ifdef DEBUG_roc
      printf("*** Reflowing child #%d %p: availHeight=%d\n",
             columnCount, (void*)child,availSize.BSize(wm));
#endif

      // Note if the column's next in flow is not being changed by this incremental reflow.
      // This may allow the current column to avoid trying to pull lines from the next column.
      if (child->GetNextSibling() &&
          !(GetStateBits() & NS_FRAME_IS_DIRTY) &&
        !(child->GetNextSibling()->GetStateBits() & NS_FRAME_IS_DIRTY)) {
        kidReflowInput.mFlags.mNextInFlowUntouched = true;
      }

      ReflowOutput kidDesiredSize(wm, aDesiredSize.mFlags);

      // XXX it would be cool to consult the float manager for the
      // previous block to figure out the region of floats from the
      // previous column that extend into this column, and subtract
      // that region from the new float manager.  So you could stick a
      // really big float in the first column and text in following
      // columns would flow around it.

      // Reflow the frame
      LogicalPoint origin(wm,
                          childOrigin.I(wm) +
                          kidReflowInput.ComputedLogicalMargin().IStart(wm),
                          childOrigin.B(wm) +
                          kidReflowInput.ComputedLogicalMargin().BStart(wm));
      ReflowChild(child, PresContext(), kidDesiredSize, kidReflowInput,
                  wm, origin, containerSize, 0, aStatus);

      reflowNext = (aStatus & NS_FRAME_REFLOW_NEXTINFLOW) != 0;

#ifdef DEBUG_roc
      printf("*** Reflowed child #%d %p: status = %d, desiredSize=%d,%d CarriedOutBEndMargin=%d\n",
             columnCount, (void*)child, aStatus, kidDesiredSize.Width(), kidDesiredSize.Height(),
             kidDesiredSize.mCarriedOutBEndMargin.get());
#endif

      NS_FRAME_TRACE_REFLOW_OUT("Column::Reflow", aStatus);

      *aCarriedOutBEndMargin = kidDesiredSize.mCarriedOutBEndMargin;

      FinishReflowChild(child, PresContext(), kidDesiredSize,
                        &kidReflowInput, wm, childOrigin, containerSize, 0);

      childContentBEnd = nsLayoutUtils::CalculateContentBEnd(wm, child);
      if (childContentBEnd > aConfig.mColMaxBSize) {
        allFit = false;
      }
      if (childContentBEnd > availSize.BSize(wm)) {
        aColData.mMaxOverflowingBSize = std::max(childContentBEnd,
            aColData.mMaxOverflowingBSize);
      }
    }

    contentRect.UnionRect(contentRect, child->GetRect());

    ConsiderChildOverflow(overflowRects, child);
    contentBEnd = std::max(contentBEnd, childContentBEnd);
    aColData.mLastBSize = childContentBEnd;
    aColData.mSumBSize += childContentBEnd;

    // Build a continuation column if necessary
    nsIFrame* kidNextInFlow = child->GetNextInFlow();

    if (NS_FRAME_IS_FULLY_COMPLETE(aStatus) && !NS_FRAME_IS_TRUNCATED(aStatus)) {
      NS_ASSERTION(!kidNextInFlow, "next in flow should have been deleted");
      child = nullptr;
      break;
    } else {
      ++columnCount;
      // Make sure that the column has a next-in-flow. If not, we must
      // create one to hold the overflowing stuff, even if we're just
      // going to put it on our overflow list and let *our*
      // next in flow handle it.
      if (!kidNextInFlow) {
        NS_ASSERTION(aStatus & NS_FRAME_REFLOW_NEXTINFLOW,
                     "We have to create a continuation, but the block doesn't want us to reflow it?");

        // We need to create a continuing column
        kidNextInFlow = CreateNextInFlow(child);
      }

      // Make sure we reflow a next-in-flow when it switches between being
      // normal or overflow container
      if (NS_FRAME_OVERFLOW_IS_INCOMPLETE(aStatus)) {
        if (!(kidNextInFlow->GetStateBits() & NS_FRAME_IS_OVERFLOW_CONTAINER)) {
          aStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
          reflowNext = true;
          kidNextInFlow->AddStateBits(NS_FRAME_IS_OVERFLOW_CONTAINER);
        }
      }
      else if (kidNextInFlow->GetStateBits() & NS_FRAME_IS_OVERFLOW_CONTAINER) {
        aStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
        reflowNext = true;
        kidNextInFlow->RemoveStateBits(NS_FRAME_IS_OVERFLOW_CONTAINER);
      }

      if ((contentBEnd > aReflowInput.ComputedMaxBSize() ||
           contentBEnd > aReflowInput.ComputedBSize()) &&
           aConfig.mBalanceColCount < INT32_MAX) {
        // We overflowed vertically, but have not exceeded the number of
        // columns. We're going to go into overflow columns now, so balancing
        // no longer applies.
        aColData.mHasExcessBSize = true;
      }

      if (columnCount >= aConfig.mBalanceColCount) {
        // No more columns allowed here. Stop.
        aStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
        kidNextInFlow->AddStateBits(NS_FRAME_IS_DIRTY);
        // Move any of our leftover columns to our overflow list. Our
        // next-in-flow will eventually pick them up.
        const nsFrameList& continuationColumns = mFrames.RemoveFramesAfter(child);
        if (continuationColumns.NotEmpty()) {
          SetOverflowFrames(continuationColumns);
        }
        child = nullptr;
        break;
      }
    }

    if (PresContext()->HasPendingInterrupt()) {
      // Stop the loop now while |child| still points to the frame that bailed
      // out.  We could keep going here and condition a bunch of the code in
      // this loop on whether there's an interrupt, or even just keep going and
      // trying to reflow the blocks (even though we know they'll interrupt
      // right after their first line), but stopping now is conceptually the
      // simplest (and probably fastest) thing.
      break;
    }

    // Advance to the next column
    child = child->GetNextSibling();

    if (child) {
      childOrigin.I(wm) += aConfig.mColISize + aConfig.mColGap;

#ifdef DEBUG_roc
      printf("*** NEXT CHILD ORIGIN.icoord = %d\n", childOrigin.I(wm));
#endif
    }
  }

  if (PresContext()->CheckForInterrupt(this) &&
      (GetStateBits() & NS_FRAME_IS_DIRTY)) {
    // Mark all our kids starting with |child| dirty

    // Note that this is a CheckForInterrupt call, not a HasPendingInterrupt,
    // because we might have interrupted while reflowing |child|, and since
    // we're about to add a dirty bit to |child| we need to make sure that
    // |this| is scheduled to have dirty bits marked on it and its ancestors.
    // Otherwise, when we go to mark dirty bits on |child|'s ancestors we'll
    // bail out immediately, since it'll already have a dirty bit.
    for (; child; child = child->GetNextSibling()) {
      child->AddStateBits(NS_FRAME_IS_DIRTY);
    }
  }

  aColData.mMaxBSize = contentBEnd;
  LogicalSize contentSize = LogicalSize(wm, contentRect.Size());
  contentSize.BSize(wm) = std::max(contentSize.BSize(wm), contentBEnd);
  mLastFrameStatus = aStatus;

  // Apply computed and min/max values
  if (aConfig.mComputedBSize != NS_INTRINSICSIZE) {
    if (aReflowInput.AvailableBSize() != NS_INTRINSICSIZE) {
      contentSize.BSize(wm) = std::min(contentSize.BSize(wm),
                                       aConfig.mComputedBSize);
    } else {
      contentSize.BSize(wm) = aConfig.mComputedBSize;
    }
  } else {
    // We add the "consumed" block-size back in so that we're applying
    // constraints to the correct bSize value, then subtract it again
    // after we've finished with the min/max calculation. This prevents us from
    // having a last continuation that is smaller than the min bSize. but which
    // has prev-in-flows, trigger a larger bSize than actually required.
    contentSize.BSize(wm) =
      aReflowInput.ApplyMinMaxBSize(contentSize.BSize(wm),
                                    aConfig.mConsumedBSize);
  }
  if (aReflowInput.ComputedISize() != NS_INTRINSICSIZE) {
    contentSize.ISize(wm) = aReflowInput.ComputedISize();
  } else {
    contentSize.ISize(wm) =
      aReflowInput.ApplyMinMaxISize(contentSize.ISize(wm));
  }

  contentSize.ISize(wm) += borderPadding.IStartEnd(wm);
  contentSize.BSize(wm) += borderPadding.BStartEnd(wm);
  aDesiredSize.SetSize(wm, contentSize);
  aDesiredSize.mOverflowAreas = overflowRects;
  aDesiredSize.UnionOverflowAreasWithDesiredBounds();

  // In vertical-rl mode, make a second pass if necessary to reposition the
  // columns with the correct container width. (In other writing modes,
  // correct containerSize was not required for column positioning so we don't
  // need this fixup.)
  if (wm.IsVerticalRL() && containerSize.width != contentSize.Width(wm)) {
    const nsSize finalContainerSize = aDesiredSize.PhysicalSize();
    for (nsIFrame* child : mFrames) {
      // Get the logical position as set previously using a provisional or
      // dummy containerSize, and reset with the correct container size.
      child->SetPosition(wm, child->GetLogicalPosition(wm, containerSize),
                         finalContainerSize);
    }
  }

#ifdef DEBUG_roc
  printf("*** DONE PASS feasible=%d\n", allFit && NS_FRAME_IS_FULLY_COMPLETE(aStatus)
         && !NS_FRAME_IS_TRUNCATED(aStatus));
#endif
  return allFit && NS_FRAME_IS_FULLY_COMPLETE(aStatus)
    && !NS_FRAME_IS_TRUNCATED(aStatus);
}
Ejemplo n.º 10
0
nsColumnSetFrame::ReflowConfig
nsColumnSetFrame::ChooseColumnStrategy(const ReflowInput& aReflowInput,
                                       bool aForceAuto = false,
                                       nscoord aFeasibleBSize = NS_INTRINSICSIZE,
                                       nscoord aInfeasibleBSize = 0)
{
  nscoord knownFeasibleBSize = aFeasibleBSize;
  nscoord knownInfeasibleBSize = aInfeasibleBSize;

  const nsStyleColumn* colStyle = StyleColumn();
  nscoord availContentISize = GetAvailableContentISize(aReflowInput);
  if (aReflowInput.ComputedISize() != NS_INTRINSICSIZE) {
    availContentISize = aReflowInput.ComputedISize();
  }

  nscoord consumedBSize = GetConsumedBSize();

  // The effective computed height is the height of the current continuation
  // of the column set frame. This should be the same as the computed height
  // if we have an unconstrained available height.
  nscoord computedBSize = GetEffectiveComputedBSize(aReflowInput,
                                                    consumedBSize);
  nscoord colBSize = GetAvailableContentBSize(aReflowInput);

  if (aReflowInput.ComputedBSize() != NS_INTRINSICSIZE) {
    colBSize = aReflowInput.ComputedBSize();
  } else if (aReflowInput.ComputedMaxBSize() != NS_INTRINSICSIZE) {
    colBSize = std::min(colBSize, aReflowInput.ComputedMaxBSize());
  }

  nscoord colGap = GetColumnGap(this, colStyle);
  int32_t numColumns = colStyle->mColumnCount;

  // If column-fill is set to 'balance', then we want to balance the columns.
  const bool isBalancing = colStyle->mColumnFill == NS_STYLE_COLUMN_FILL_BALANCE
                           && !aForceAuto;
  if (isBalancing) {
    const uint32_t MAX_NESTED_COLUMN_BALANCING = 2;
    uint32_t cnt = 0;
    for (const ReflowInput* rs = aReflowInput.mParentReflowInput;
         rs && cnt < MAX_NESTED_COLUMN_BALANCING; rs = rs->mParentReflowInput) {
      if (rs->mFlags.mIsColumnBalancing) {
        ++cnt;
      }
    }
    if (cnt == MAX_NESTED_COLUMN_BALANCING) {
      numColumns = 1;
    }
  }

  nscoord colISize;
  // In vertical writing-mode, "column-width" (inline size) will actually be
  // physical height, but its CSS name is still column-width.
  if (colStyle->mColumnWidth.GetUnit() == eStyleUnit_Coord) {
    colISize = colStyle->mColumnWidth.GetCoordValue();
    NS_ASSERTION(colISize >= 0, "negative column width");
    // Reduce column count if necessary to make columns fit in the
    // available width. Compute max number of columns that fit in
    // availContentISize, satisfying colGap*(maxColumns - 1) +
    // colISize*maxColumns <= availContentISize
    if (availContentISize != NS_INTRINSICSIZE && colGap + colISize > 0
        && numColumns > 0) {
      // This expression uses truncated rounding, which is what we
      // want
      int32_t maxColumns =
        std::min(nscoord(nsStyleColumn::kMaxColumnCount),
                 (availContentISize + colGap) / (colGap + colISize));
      numColumns = std::max(1, std::min(numColumns, maxColumns));
    }
  } else if (numColumns > 0 && availContentISize != NS_INTRINSICSIZE) {
    nscoord iSizeMinusGaps = availContentISize - colGap * (numColumns - 1);
    colISize = iSizeMinusGaps / numColumns;
  } else {
    colISize = NS_INTRINSICSIZE;
  }
  // Take care of the situation where there's only one column but it's
  // still too wide
  colISize = std::max(1, std::min(colISize, availContentISize));

  nscoord expectedISizeLeftOver = 0;

  if (colISize != NS_INTRINSICSIZE && availContentISize != NS_INTRINSICSIZE) {
    // distribute leftover space

    // First, determine how many columns will be showing if the column
    // count is auto
    if (numColumns <= 0) {
      // choose so that colGap*(nominalColumnCount - 1) +
      // colISize*nominalColumnCount is nearly availContentISize
      // make sure to round down
      if (colGap + colISize > 0) {
        numColumns = (availContentISize + colGap) / (colGap + colISize);
        // The number of columns should never exceed kMaxColumnCount.
        numColumns = std::min(nscoord(nsStyleColumn::kMaxColumnCount),
                              numColumns);
      }
      if (numColumns <= 0) {
        numColumns = 1;
      }
    }

    // Compute extra space and divide it among the columns
    nscoord extraSpace =
      std::max(0, availContentISize - (colISize * numColumns +
                                       colGap * (numColumns - 1)));
    nscoord extraToColumns = extraSpace / numColumns;
    colISize += extraToColumns;
    expectedISizeLeftOver = extraSpace - (extraToColumns * numColumns);
  }

  if (isBalancing) {
    if (numColumns <= 0) {
      // Hmm, auto column count, column width or available width is unknown,
      // and balancing is required. Let's just use one column then.
      numColumns = 1;
    }
    colBSize = std::min(mLastBalanceBSize, colBSize);
  } else {
    // This is the case when the column-fill property is set to 'auto'.
    // No balancing, so don't limit the column count
    numColumns = INT32_MAX;

    // XXX_jwir3: If a page's height is set to 0, we could continually
    //            create continuations, resulting in an infinite loop, since
    //            no progress is ever made. This is an issue with the spec
    //            (css3-multicol, css3-page, and css3-break) that is
    //            unresolved as of 27 Feb 2013. For the time being, we set this
    //            to have a minimum of 1 css px. Once a resolution is made
    //            on what minimum to have for a page height, we may need to
    //            change this value to match the appropriate spec(s).
    colBSize = std::max(colBSize, nsPresContext::CSSPixelsToAppUnits(1));
  }

#ifdef DEBUG_roc
  printf("*** nsColumnSetFrame::ChooseColumnStrategy: numColumns=%d, colISize=%d,"
         " expectedISizeLeftOver=%d, colBSize=%d, colGap=%d\n",
         numColumns, colISize, expectedISizeLeftOver, colBSize, colGap);
#endif
  ReflowConfig config = { numColumns, colISize, expectedISizeLeftOver, colGap,
                          colBSize, isBalancing, knownFeasibleBSize,
                          knownInfeasibleBSize, computedBSize, consumedBSize };
  return config;
}
Ejemplo n.º 11
0
void
nsColumnSetFrame::Reflow(nsPresContext*           aPresContext,
                         ReflowOutput&     aDesiredSize,
                         const ReflowInput& aReflowInput,
                         nsReflowStatus&          aStatus)
{
  MarkInReflow();
  // Don't support interruption in columns
  nsPresContext::InterruptPreventer noInterrupts(aPresContext);

  DO_GLOBAL_REFLOW_COUNT("nsColumnSetFrame");
  DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);

  // Initialize OUT parameter
  aStatus = NS_FRAME_COMPLETE;

  // Our children depend on our block-size if we have a fixed block-size.
  if (aReflowInput.ComputedBSize() != NS_AUTOHEIGHT) {
    AddStateBits(NS_FRAME_CONTAINS_RELATIVE_BSIZE);
  } else {
    RemoveStateBits(NS_FRAME_CONTAINS_RELATIVE_BSIZE);
  }

#ifdef DEBUG
  nsFrameList::Enumerator oc(GetChildList(kOverflowContainersList));
  for (; !oc.AtEnd(); oc.Next()) {
    MOZ_ASSERT(!IS_TRUE_OVERFLOW_CONTAINER(oc.get()));
  }
  nsFrameList::Enumerator eoc(GetChildList(kExcessOverflowContainersList));
  for (; !eoc.AtEnd(); eoc.Next()) {
    MOZ_ASSERT(!IS_TRUE_OVERFLOW_CONTAINER(eoc.get()));
  }
#endif

  nsOverflowAreas ocBounds;
  nsReflowStatus ocStatus = NS_FRAME_COMPLETE;
  if (GetPrevInFlow()) {
    ReflowOverflowContainerChildren(aPresContext, aReflowInput, ocBounds, 0,
                                    ocStatus);
  }

  //------------ Handle Incremental Reflow -----------------

  // If inline size is unconstrained, set aForceAuto to true to allow
  // the columns to expand in the inline direction. (This typically
  // happens in orthogonal flows where the inline direction is the
  // container's block direction).
  ReflowConfig config =
    ChooseColumnStrategy(aReflowInput,
                         aReflowInput.ComputedISize() == NS_UNCONSTRAINEDSIZE);

  // If balancing, then we allow the last column to grow to unbounded
  // height during the first reflow. This gives us a way to estimate
  // what the average column height should be, because we can measure
  // the heights of all the columns and sum them up. But don't do this
  // if we have a next in flow because we don't want to suck all its
  // content back here and then have to push it out again!
  nsIFrame* nextInFlow = GetNextInFlow();
  bool unboundedLastColumn = config.mIsBalancing && !nextInFlow;
  nsCollapsingMargin carriedOutBottomMargin;
  ColumnBalanceData colData;
  colData.mHasExcessBSize = false;

  bool feasible = ReflowColumns(aDesiredSize, aReflowInput, aStatus, config,
                                unboundedLastColumn, &carriedOutBottomMargin,
                                colData);

  // If we're not balancing, then we're already done, since we should have
  // reflown all of our children, and there is no need for a binary search to
  // determine proper column height.
  if (config.mIsBalancing && !aPresContext->HasPendingInterrupt()) {
    FindBestBalanceBSize(aReflowInput, aPresContext, config, colData,
                          aDesiredSize, carriedOutBottomMargin,
                          unboundedLastColumn, feasible, aStatus);
  }

  if (aPresContext->HasPendingInterrupt() &&
      aReflowInput.AvailableBSize() == NS_UNCONSTRAINEDSIZE) {
    // In this situation, we might be lying about our reflow status, because
    // our last kid (the one that got interrupted) was incomplete.  Fix that.
    aStatus = NS_FRAME_COMPLETE;
  }

  NS_ASSERTION(NS_FRAME_IS_FULLY_COMPLETE(aStatus) ||
               aReflowInput.AvailableBSize() != NS_UNCONSTRAINEDSIZE,
               "Column set should be complete if the available block-size is unconstrained");

  // Merge overflow container bounds and status.
  aDesiredSize.mOverflowAreas.UnionWith(ocBounds);
  NS_MergeReflowStatusInto(&aStatus, ocStatus);

  FinishReflowWithAbsoluteFrames(aPresContext, aDesiredSize, aReflowInput, aStatus, false);

  aDesiredSize.mCarriedOutBEndMargin = carriedOutBottomMargin;

  NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
Ejemplo n.º 12
0
void
nsFieldSetFrame::Reflow(nsPresContext*           aPresContext,
                        ReflowOutput&     aDesiredSize,
                        const ReflowInput& aReflowInput,
                        nsReflowStatus&          aStatus)
{
  MarkInReflow();
  DO_GLOBAL_REFLOW_COUNT("nsFieldSetFrame");
  DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);

  NS_PRECONDITION(aReflowInput.ComputedISize() != NS_INTRINSICSIZE,
                  "Should have a precomputed inline-size!");

  // Initialize OUT parameter
  aStatus = NS_FRAME_COMPLETE;

  nsOverflowAreas ocBounds;
  nsReflowStatus ocStatus = NS_FRAME_COMPLETE;
  if (GetPrevInFlow()) {
    ReflowOverflowContainerChildren(aPresContext, aReflowInput, ocBounds, 0,
                                    ocStatus);
  }

  //------------ Handle Incremental Reflow -----------------
  bool reflowInner;
  bool reflowLegend;
  nsIFrame* legend = GetLegend();
  nsIFrame* inner = GetInner();
  if (aReflowInput.ShouldReflowAllKids()) {
    reflowInner = inner != nullptr;
    reflowLegend = legend != nullptr;
  } else {
    reflowInner = inner && NS_SUBTREE_DIRTY(inner);
    reflowLegend = legend && NS_SUBTREE_DIRTY(legend);
  }

  // We don't allow fieldsets to break vertically. If we did, we'd
  // need logic here to push and pull overflow frames.
  // Since we're not applying our padding in this frame, we need to add it here
  // to compute the available width for our children.
  WritingMode wm = GetWritingMode();
  WritingMode innerWM = inner ? inner->GetWritingMode() : wm;
  WritingMode legendWM = legend ? legend->GetWritingMode() : wm;
  LogicalSize innerAvailSize = aReflowInput.ComputedSizeWithPadding(innerWM);
  LogicalSize legendAvailSize = aReflowInput.ComputedSizeWithPadding(legendWM);
  innerAvailSize.BSize(innerWM) = legendAvailSize.BSize(legendWM) =
    NS_UNCONSTRAINEDSIZE;
  NS_ASSERTION(!inner ||
      nsLayoutUtils::IntrinsicForContainer(aReflowInput.mRenderingContext,
                                           inner,
                                           nsLayoutUtils::MIN_ISIZE) <=
               innerAvailSize.ISize(innerWM),
               "Bogus availSize.ISize; should be bigger");
  NS_ASSERTION(!legend ||
      nsLayoutUtils::IntrinsicForContainer(aReflowInput.mRenderingContext,
                                           legend,
                                           nsLayoutUtils::MIN_ISIZE) <=
               legendAvailSize.ISize(legendWM),
               "Bogus availSize.ISize; should be bigger");

  // get our border and padding
  LogicalMargin border = aReflowInput.ComputedLogicalBorderPadding() -
                         aReflowInput.ComputedLogicalPadding();

  // Figure out how big the legend is if there is one.
  // get the legend's margin
  LogicalMargin legendMargin(wm);
  // reflow the legend only if needed
  Maybe<ReflowInput> legendReflowInput;
  if (legend) {
    legendReflowInput.emplace(aPresContext, aReflowInput, legend,
                                legendAvailSize);
  }
  if (reflowLegend) {
    ReflowOutput legendDesiredSize(aReflowInput);

    // We'll move the legend to its proper place later, so the position
    // and containerSize passed here are unimportant.
    const nsSize dummyContainerSize;
    ReflowChild(legend, aPresContext, legendDesiredSize, *legendReflowInput,
                wm, LogicalPoint(wm), dummyContainerSize,
                NS_FRAME_NO_MOVE_FRAME, aStatus);
#ifdef NOISY_REFLOW
    printf("  returned (%d, %d)\n",
           legendDesiredSize.Width(), legendDesiredSize.Height());
#endif
    // figure out the legend's rectangle
    legendMargin = legend->GetLogicalUsedMargin(wm);
    mLegendRect =
      LogicalRect(wm, 0, 0,
                  legendDesiredSize.ISize(wm) + legendMargin.IStartEnd(wm),
                  legendDesiredSize.BSize(wm) + legendMargin.BStartEnd(wm));
    nscoord oldSpace = mLegendSpace;
    mLegendSpace = 0;
    if (mLegendRect.BSize(wm) > border.BStart(wm)) {
      // center the border on the legend
      mLegendSpace = mLegendRect.BSize(wm) - border.BStart(wm);
    } else {
      mLegendRect.BStart(wm) =
        (border.BStart(wm) - mLegendRect.BSize(wm)) / 2;
    }

    // if the legend space changes then we need to reflow the
    // content area as well.
    if (mLegendSpace != oldSpace && inner) {
      reflowInner = true;
    }

    FinishReflowChild(legend, aPresContext, legendDesiredSize,
                      legendReflowInput.ptr(), wm, LogicalPoint(wm),
                      dummyContainerSize, NS_FRAME_NO_MOVE_FRAME);
  } else if (!legend) {
    mLegendRect.SetEmpty();
    mLegendSpace = 0;
  } else {
    // mLegendSpace and mLegendRect haven't changed, but we need
    // the used margin when placing the legend.
    legendMargin = legend->GetLogicalUsedMargin(wm);
  }

  // This containerSize is incomplete as yet: it does not include the size
  // of the |inner| frame itself.
  nsSize containerSize = (LogicalSize(wm, 0, mLegendSpace) +
                          border.Size(wm)).GetPhysicalSize(wm);
  // reflow the content frame only if needed
  if (reflowInner) {
    ReflowInput kidReflowInput(aPresContext, aReflowInput, inner,
                                     innerAvailSize, nullptr,
                                     ReflowInput::CALLER_WILL_INIT);
    // Override computed padding, in case it's percentage padding
    kidReflowInput.Init(aPresContext, nullptr, nullptr,
                        &aReflowInput.ComputedPhysicalPadding());
    // Our child is "height:100%" but we actually want its height to be reduced
    // by the amount of content-height the legend is eating up, unless our
    // height is unconstrained (in which case the child's will be too).
    if (aReflowInput.ComputedBSize() != NS_UNCONSTRAINEDSIZE) {
      kidReflowInput.SetComputedBSize(
         std::max(0, aReflowInput.ComputedBSize() - mLegendSpace));
    }

    if (aReflowInput.ComputedMinBSize() > 0) {
      kidReflowInput.ComputedMinBSize() =
        std::max(0, aReflowInput.ComputedMinBSize() - mLegendSpace);
    }

    if (aReflowInput.ComputedMaxBSize() != NS_UNCONSTRAINEDSIZE) {
      kidReflowInput.ComputedMaxBSize() =
        std::max(0, aReflowInput.ComputedMaxBSize() - mLegendSpace);
    }

    ReflowOutput kidDesiredSize(kidReflowInput,
                                       aDesiredSize.mFlags);
    // Reflow the frame
    NS_ASSERTION(kidReflowInput.ComputedPhysicalMargin() == nsMargin(0,0,0,0),
                 "Margins on anonymous fieldset child not supported!");
    LogicalPoint pt(wm, border.IStart(wm), border.BStart(wm) + mLegendSpace);

    // We don't know the correct containerSize until we have reflowed |inner|,
    // so we use a dummy value for now; FinishReflowChild will fix the position
    // if necessary.
    const nsSize dummyContainerSize;
    ReflowChild(inner, aPresContext, kidDesiredSize, kidReflowInput,
                wm, pt, dummyContainerSize, 0, aStatus);

    // Update containerSize to account for size of the inner frame, so that
    // FinishReflowChild can position it correctly.
    containerSize += kidDesiredSize.PhysicalSize();
    FinishReflowChild(inner, aPresContext, kidDesiredSize,
                      &kidReflowInput, wm, pt, containerSize, 0);
    NS_FRAME_TRACE_REFLOW_OUT("FieldSet::Reflow", aStatus);
  } else if (inner) {
    // |inner| didn't need to be reflowed but we do need to include its size
    // in containerSize.
    containerSize += inner->GetSize();
  }

  LogicalRect contentRect(wm);
  if (inner) {
    // We don't support margins on inner, so our content rect is just the
    // inner's border-box. (We don't really care about container size at this
    // point, as we'll figure out the actual positioning later.)
    contentRect = inner->GetLogicalRect(wm, containerSize);
  }

  // Our content rect must fill up the available width
  LogicalSize availSize = aReflowInput.ComputedSizeWithPadding(wm);
  if (availSize.ISize(wm) > contentRect.ISize(wm)) {
    contentRect.ISize(wm) = innerAvailSize.ISize(wm);
  }

  if (legend) {
    // The legend is positioned inline-wards within the inner's content rect
    // (so that padding on the fieldset affects the legend position).
    LogicalRect innerContentRect = contentRect;
    innerContentRect.Deflate(wm, aReflowInput.ComputedLogicalPadding());
    // If the inner content rect is larger than the legend, we can align the
    // legend.
    if (innerContentRect.ISize(wm) > mLegendRect.ISize(wm)) {
      // NOTE legend @align values are: left/right/center/top/bottom.
      // GetLogicalAlign converts left/right to start/end for the given WM.
      // @see HTMLLegendElement::ParseAttribute, nsLegendFrame::GetLogicalAlign
      int32_t align = static_cast<nsLegendFrame*>
        (legend->GetContentInsertionFrame())->GetLogicalAlign(wm);
      switch (align) {
        case NS_STYLE_TEXT_ALIGN_END:
          mLegendRect.IStart(wm) =
            innerContentRect.IEnd(wm) - mLegendRect.ISize(wm);
          break;
        case NS_STYLE_TEXT_ALIGN_CENTER:
          // Note: rounding removed; there doesn't seem to be any need
          mLegendRect.IStart(wm) = innerContentRect.IStart(wm) +
            (innerContentRect.ISize(wm) - mLegendRect.ISize(wm)) / 2;
          break;
        case NS_STYLE_TEXT_ALIGN_START:
        case NS_STYLE_VERTICAL_ALIGN_TOP:
        case NS_STYLE_VERTICAL_ALIGN_BOTTOM:
          mLegendRect.IStart(wm) = innerContentRect.IStart(wm);
          break;
        default:
          MOZ_ASSERT_UNREACHABLE("unexpected GetLogicalAlign value");
      }
    } else {
      // otherwise make place for the legend
      mLegendRect.IStart(wm) = innerContentRect.IStart(wm);
      innerContentRect.ISize(wm) = mLegendRect.ISize(wm);
      contentRect.ISize(wm) = mLegendRect.ISize(wm) +
        aReflowInput.ComputedLogicalPadding().IStartEnd(wm);
    }

    // place the legend
    LogicalRect actualLegendRect = mLegendRect;
    actualLegendRect.Deflate(wm, legendMargin);
    LogicalPoint actualLegendPos(actualLegendRect.Origin(wm));

    // Note that legend's writing mode may be different from the fieldset's,
    // so we need to convert offsets before applying them to it (bug 1134534).
    LogicalMargin offsets =
      legendReflowInput->ComputedLogicalOffsets().
        ConvertTo(wm, legendReflowInput->GetWritingMode());
    ReflowInput::ApplyRelativePositioning(legend, wm, offsets,
                                                &actualLegendPos,
                                                containerSize);

    legend->SetPosition(wm, actualLegendPos, containerSize);
    nsContainerFrame::PositionFrameView(legend);
    nsContainerFrame::PositionChildViews(legend);
  }

  // Return our size and our result.
  LogicalSize finalSize(wm, contentRect.ISize(wm) + border.IStartEnd(wm),
                        mLegendSpace + border.BStartEnd(wm) +
                        (inner ? inner->BSize(wm) : 0));
  aDesiredSize.SetSize(wm, finalSize);
  aDesiredSize.SetOverflowAreasToDesiredBounds();

  if (legend) {
    ConsiderChildOverflow(aDesiredSize.mOverflowAreas, legend);
  }
  if (inner) {
    ConsiderChildOverflow(aDesiredSize.mOverflowAreas, inner);
  }

  // Merge overflow container bounds and status.
  aDesiredSize.mOverflowAreas.UnionWith(ocBounds);
  NS_MergeReflowStatusInto(&aStatus, ocStatus);

  FinishReflowWithAbsoluteFrames(aPresContext, aDesiredSize, aReflowInput, aStatus);

  InvalidateFrame();

  NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
Ejemplo n.º 13
0
void
nsVideoFrame::Reflow(nsPresContext* aPresContext,
                     ReflowOutput& aMetrics,
                     const ReflowInput& aReflowInput,
                     nsReflowStatus& aStatus)
{
  MarkInReflow();
  DO_GLOBAL_REFLOW_COUNT("nsVideoFrame");
  DISPLAY_REFLOW(aPresContext, this, aReflowInput, aMetrics, aStatus);
  NS_FRAME_TRACE(NS_FRAME_TRACE_CALLS,
                 ("enter nsVideoFrame::Reflow: availSize=%d,%d",
                  aReflowInput.AvailableWidth(),
                  aReflowInput.AvailableHeight()));

  NS_PRECONDITION(mState & NS_FRAME_IN_REFLOW, "frame is not in reflow");

  aStatus = NS_FRAME_COMPLETE;

  const WritingMode myWM = aReflowInput.GetWritingMode();
  nscoord contentBoxBSize = aReflowInput.ComputedBSize();
  const nscoord borderBoxISize = aReflowInput.ComputedISize() +
    aReflowInput.ComputedLogicalBorderPadding().IStartEnd(myWM);
  const bool isBSizeShrinkWrapping = (contentBoxBSize == NS_INTRINSICSIZE);

  nscoord borderBoxBSize;
  if (!isBSizeShrinkWrapping) {
    borderBoxBSize = contentBoxBSize +
      aReflowInput.ComputedLogicalBorderPadding().BStartEnd(myWM);
  }

  nsMargin borderPadding = aReflowInput.ComputedPhysicalBorderPadding();

  // Reflow the child frames. We may have up to three: an image
  // frame (for the poster image), a container frame for the controls,
  // and a container frame for the caption.
  for (nsIFrame* child : mFrames) {
    nsSize oldChildSize = child->GetSize();

    if (child->GetContent() == mPosterImage) {
      // Reflow the poster frame.
      nsImageFrame* imageFrame = static_cast<nsImageFrame*>(child);
      ReflowOutput kidDesiredSize(aReflowInput);
      WritingMode wm = imageFrame->GetWritingMode();
      LogicalSize availableSize = aReflowInput.AvailableSize(wm);
      LogicalSize cbSize = aMetrics.Size(aMetrics.GetWritingMode()).
                             ConvertTo(wm, aMetrics.GetWritingMode());
      ReflowInput kidReflowInput(aPresContext,
                                       aReflowInput,
                                       imageFrame,
                                       availableSize,
                                       &cbSize);

      nsRect posterRenderRect;
      if (ShouldDisplayPoster()) {
        posterRenderRect =
          nsRect(nsPoint(borderPadding.left, borderPadding.top),
                 nsSize(aReflowInput.ComputedWidth(),
                        aReflowInput.ComputedHeight()));
      }
      kidReflowInput.SetComputedWidth(posterRenderRect.width);
      kidReflowInput.SetComputedHeight(posterRenderRect.height);
      ReflowChild(imageFrame, aPresContext, kidDesiredSize, kidReflowInput,
                  posterRenderRect.x, posterRenderRect.y, 0, aStatus);
      FinishReflowChild(imageFrame, aPresContext,
                        kidDesiredSize, &kidReflowInput,
                        posterRenderRect.x, posterRenderRect.y, 0);

// Android still uses XUL media controls & hence needs this XUL-friendly
// custom reflow code. This will go away in bug 1310907.
#ifdef ANDROID
    } else if (child->GetContent() == mVideoControls) {
      // Reflow the video controls frame.
      nsBoxLayoutState boxState(PresContext(), aReflowInput.mRenderingContext);
      nsBoxFrame::LayoutChildAt(boxState,
                                child,
                                nsRect(borderPadding.left,
                                       borderPadding.top,
                                       aReflowInput.ComputedWidth(),
                                       aReflowInput.ComputedHeight()));

#endif // ANDROID
    } else if (child->GetContent() == mCaptionDiv ||
               child->GetContent() == mVideoControls) {
      // Reflow the caption and control bar frames.
      WritingMode wm = child->GetWritingMode();
      LogicalSize availableSize = aReflowInput.ComputedSize(wm);
      availableSize.BSize(wm) = NS_UNCONSTRAINEDSIZE;

      ReflowInput kidReflowInput(aPresContext,
                                       aReflowInput,
                                       child,
                                       availableSize);
      ReflowOutput kidDesiredSize(kidReflowInput);
      ReflowChild(child, aPresContext, kidDesiredSize, kidReflowInput,
                  borderPadding.left, borderPadding.top, 0, aStatus);

      if (child->GetContent() == mVideoControls && isBSizeShrinkWrapping) {
        // Resolve our own BSize based on the controls' size in the same axis.
        contentBoxBSize = myWM.IsOrthogonalTo(wm) ?
          kidDesiredSize.ISize(wm) : kidDesiredSize.BSize(wm);
      }

      FinishReflowChild(child, aPresContext,
                        kidDesiredSize, &kidReflowInput,
                        borderPadding.left, borderPadding.top, 0);
    }

    if (child->GetContent() == mVideoControls && child->GetSize() != oldChildSize) {
      RefPtr<Runnable> event = new DispatchResizeToControls(child->GetContent());
      nsContentUtils::AddScriptRunner(event);
    }
  }

  if (isBSizeShrinkWrapping) {
    if (contentBoxBSize == NS_INTRINSICSIZE) {
      // We didn't get a BSize from our intrinsic size/ratio, nor did we
      // get one from our controls. Just use BSize of 0.
      contentBoxBSize = 0;
    }
    contentBoxBSize = NS_CSS_MINMAX(contentBoxBSize,
                                    aReflowInput.ComputedMinBSize(),
                                    aReflowInput.ComputedMaxBSize());
    borderBoxBSize = contentBoxBSize +
      aReflowInput.ComputedLogicalBorderPadding().BStartEnd(myWM);
  }

  LogicalSize logicalDesiredSize(myWM, borderBoxISize, borderBoxBSize);
  aMetrics.SetSize(myWM, logicalDesiredSize);

  aMetrics.SetOverflowAreasToDesiredBounds();

  FinishAndStoreOverflow(&aMetrics);

  NS_FRAME_TRACE(NS_FRAME_TRACE_CALLS,
                 ("exit nsVideoFrame::Reflow: size=%d,%d",
                  aMetrics.Width(), aMetrics.Height()));
  NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aMetrics);
}
void
nsHTMLButtonControlFrame::ReflowButtonContents(nsPresContext* aPresContext,
                                               ReflowOutput& aButtonDesiredSize,
                                               const ReflowInput& aButtonReflowInput,
                                               nsIFrame* aFirstKid)
{
  WritingMode wm = GetWritingMode();
  LogicalSize availSize = aButtonReflowInput.ComputedSize(wm);
  availSize.BSize(wm) = NS_INTRINSICSIZE;

  // Buttons have some bonus renderer-determined border/padding,
  // which occupies part of the button's content-box area:
  LogicalMargin focusPadding =
    LogicalMargin(wm, mRenderer.GetAddedButtonBorderAndPadding());

  // See whether out availSize's inline-size is big enough.  If it's
  // smaller than our intrinsic min iSize, that means that the kid
  // wouldn't really fit.  In that case, we overflow into our internal
  // focuspadding (which other browsers don't have) so that there's a
  // little more space for it.
  // Note that GetMinISize includes the focusPadding.
  nscoord IOverflow = GetMinISize(aButtonReflowInput.mRenderingContext) -
                      aButtonReflowInput.ComputedISize();
  nscoord IFocusPadding = focusPadding.IStartEnd(wm);
  nscoord focusPaddingReduction = std::min(IFocusPadding,
                                           std::max(IOverflow, 0));
  if (focusPaddingReduction > 0) {
    nscoord startReduction = focusPadding.IStart(wm);
    if (focusPaddingReduction != IFocusPadding) {
      startReduction = NSToCoordRound(startReduction *
                                      (float(focusPaddingReduction) /
                                       float(IFocusPadding)));
    }
    focusPadding.IStart(wm) -= startReduction;
    focusPadding.IEnd(wm) -= focusPaddingReduction - startReduction;
  }

  // shorthand for a value we need to use in a bunch of places
  const LogicalMargin& clbp = aButtonReflowInput.ComputedLogicalBorderPadding();

  // Indent the child inside us by the focus border. We must do this separate
  // from the regular border.
  availSize.ISize(wm) -= focusPadding.IStartEnd(wm);

  LogicalPoint childPos(wm);
  childPos.I(wm) = focusPadding.IStart(wm) + clbp.IStart(wm);
  availSize.ISize(wm) = std::max(availSize.ISize(wm), 0);

  // Give child a clone of the button's reflow state, with height/width reduced
  // by focusPadding, so that descendants with height:100% don't protrude.
  ReflowInput adjustedButtonReflowInput =
    CloneReflowInputWithReducedContentBox(aButtonReflowInput, focusPadding);

  ReflowInput contentsReflowInput(aPresContext,
                                        adjustedButtonReflowInput,
                                        aFirstKid, availSize);

  nsReflowStatus contentsReflowStatus;
  ReflowOutput contentsDesiredSize(aButtonReflowInput);
  childPos.B(wm) = 0; // This will be set properly later, after reflowing the
                      // child to determine its size.

  // We just pass a dummy containerSize here, as the child will be
  // repositioned later by FinishReflowChild.
  nsSize dummyContainerSize;
  ReflowChild(aFirstKid, aPresContext,
              contentsDesiredSize, contentsReflowInput,
              wm, childPos, dummyContainerSize, 0, contentsReflowStatus);
  MOZ_ASSERT(NS_FRAME_IS_COMPLETE(contentsReflowStatus),
             "We gave button-contents frame unconstrained available height, "
             "so it should be complete");

  // Compute the button's content-box size:
  LogicalSize buttonContentBox(wm);
  if (aButtonReflowInput.ComputedBSize() != NS_INTRINSICSIZE) {
    // Button has a fixed block-size -- that's its content-box bSize.
    buttonContentBox.BSize(wm) = aButtonReflowInput.ComputedBSize();
  } else {
    // Button is intrinsically sized -- it should shrinkwrap the
    // button-contents' bSize, plus any focus-padding space:
    buttonContentBox.BSize(wm) =
      contentsDesiredSize.BSize(wm) + focusPadding.BStartEnd(wm);

    // Make sure we obey min/max-bSize in the case when we're doing intrinsic
    // sizing (we get it for free when we have a non-intrinsic
    // aButtonReflowInput.ComputedBSize()).  Note that we do this before
    // adjusting for borderpadding, since mComputedMaxBSize and
    // mComputedMinBSize are content bSizes.
    buttonContentBox.BSize(wm) =
      NS_CSS_MINMAX(buttonContentBox.BSize(wm),
                    aButtonReflowInput.ComputedMinBSize(),
                    aButtonReflowInput.ComputedMaxBSize());
  }
  if (aButtonReflowInput.ComputedISize() != NS_INTRINSICSIZE) {
    buttonContentBox.ISize(wm) = aButtonReflowInput.ComputedISize();
  } else {
    buttonContentBox.ISize(wm) =
      contentsDesiredSize.ISize(wm) + focusPadding.IStartEnd(wm);
    buttonContentBox.ISize(wm) =
      NS_CSS_MINMAX(buttonContentBox.ISize(wm),
                    aButtonReflowInput.ComputedMinISize(),
                    aButtonReflowInput.ComputedMaxISize());
  }

  // Center child in the block-direction in the button
  // (technically, inside of the button's focus-padding area)
  nscoord extraSpace =
    buttonContentBox.BSize(wm) - focusPadding.BStartEnd(wm) -
    contentsDesiredSize.BSize(wm);

  childPos.B(wm) = std::max(0, extraSpace / 2);

  // Adjust childPos.B() to be in terms of the button's frame-rect, instead of
  // its focus-padding rect:
  childPos.B(wm) += focusPadding.BStart(wm) + clbp.BStart(wm);

  nsSize containerSize =
    (buttonContentBox + clbp.Size(wm)).GetPhysicalSize(wm);

  // Place the child
  FinishReflowChild(aFirstKid, aPresContext,
                    contentsDesiredSize, &contentsReflowInput,
                    wm, childPos, containerSize, 0);

  // Make sure we have a useful 'ascent' value for the child
  if (contentsDesiredSize.BlockStartAscent() ==
      ReflowOutput::ASK_FOR_BASELINE) {
    WritingMode wm = aButtonReflowInput.GetWritingMode();
    contentsDesiredSize.SetBlockStartAscent(aFirstKid->GetLogicalBaseline(wm));
  }

  // OK, we're done with the child frame.
  // Use what we learned to populate the button frame's reflow metrics.
  //  * Button's height & width are content-box size + border-box contribution:
  aButtonDesiredSize.SetSize(wm,
    LogicalSize(wm, aButtonReflowInput.ComputedISize() + clbp.IStartEnd(wm),
                    buttonContentBox.BSize(wm) + clbp.BStartEnd(wm)));

  //  * Button's ascent is its child's ascent, plus the child's block-offset
  // within our frame... unless it's orthogonal, in which case we'll use the
  // contents inline-size as an approximation for now.
  // XXX is there a better strategy? should we include border-padding?
  if (aButtonDesiredSize.GetWritingMode().IsOrthogonalTo(wm)) {
    aButtonDesiredSize.SetBlockStartAscent(contentsDesiredSize.ISize(wm));
  } else {
    aButtonDesiredSize.SetBlockStartAscent(contentsDesiredSize.BlockStartAscent() +
                                           childPos.B(wm));
  }

  aButtonDesiredSize.SetOverflowAreasToDesiredBounds();
}