void init(const HeightMap &hm, f32 scale, colour_func cf, IVideoDriver *driver)
{
Scale = scale;
const u32 mp = driver -> getMaximalPrimitiveCount();
Width = hm.width();
Height = hm.height();
const u32 sw = mp / (6 * Height); // the width of each piece
u32 i=0;
for(u32 y0 = 0; y0 < Height; y0 += sw)
{
u16 y1 = y0 + sw;
if (y1 >= Height)
y1 = Height - 1; // the last one might be narrower
addstrip(hm, cf, y0, y1, i);
++i;
}
if (i<Mesh->getMeshBufferCount())
{
// clear the rest
for (u32 j=i; j<Mesh->getMeshBufferCount(); ++j)
{
Mesh->getMeshBuffer(j)->drop();
}
Mesh->MeshBuffers.erase(i,Mesh->getMeshBufferCount()-i);
}
// set dirty flag to make sure that hardware copies of this
// buffer are also updated, see IMesh::setHardwareMappingHint
Mesh->setDirty();
Mesh->recalculateBoundingBox();
}
void init(const HeightMap &hm, f32 scale, colour_func cf, IVideoDriver *driver)
{
Scale = scale;
const u32 mp = driver -> getMaximalPrimitiveCount();
Width = hm.width();
Height = hm.height();
const u32 sw = mp / (6 * Height); // the width of each piece
u32 i=0;
for(u32 y0 = 0; y0 < Height; y0 += sw)
{
u16 y1 = y0 + sw;
if (y1 >= Height)
y1 = Height - 1; // the last one might be narrower
addstrip(hm, cf, y0, y1, i);
++i;
}
if (i<Mesh->getMeshBufferCount())
{
// clear the rest
for (u32 j=i; j<Mesh->getMeshBufferCount(); ++j)
{
Mesh->getMeshBuffer(j)->drop();
}
Mesh->MeshBuffers.erase(i,Mesh->getMeshBufferCount()-i);
}
Mesh->recalculateBoundingBox();
}
//! Creates/loads an animated mesh from the file.
IAnimatedMesh* CSMFMeshFileLoader::createMesh(io::IReadFile* file)
{
// create empty mesh
SMesh *mesh = new SMesh();
// load file
u16 version;
u8 flags;
s32 limbCount;
s32 i;
io::BinaryFile::read(file, version);
io::BinaryFile::read(file, flags);
io::BinaryFile::read(file, limbCount);
// load mesh data
core::matrix4 identity;
for (i=0; i < limbCount; ++i)
loadLimb(file, mesh, identity);
// recalculate buffer bounding boxes
for (i=0; i < (s32)mesh->getMeshBufferCount(); ++i)
mesh->getMeshBuffer(i)->recalculateBoundingBox();
mesh->recalculateBoundingBox();
SAnimatedMesh *am = new SAnimatedMesh();
am->addMesh(mesh);
mesh->drop();
am->recalculateBoundingBox();
return am;
}
IMesh* MeshTools::createMeshFromSoftBody(btSoftBody* softBody)
{
SMeshBuffer* buffer = new SMeshBuffer();
video::S3DVertex vtx;
vtx.Color.set(255,255,255,255);
/* Each soft body contain an array of vertices (nodes/particles_mass) */
btSoftBody::tNodeArray& nodes(softBody->m_nodes);
// Convert bullet nodes to vertices
for(int i=0;i<nodes.size();++i)
{
const btSoftBody::Node& n=nodes[i];
const btVector3 normal=n.m_n;
const btVector3 pos=n.m_x;
vtx.Pos.set(pos.getX(), pos.getY(), pos.getZ());
vtx.Normal.set(normal.getX(), normal.getY(), normal.getZ());
// TODO: calculate texture coords
//vtx.TCoords.set(tsx, tsy);
buffer->Vertices.push_back(vtx);
}
// Convert triangles of the softbody to an index list
for(int i=0;i<softBody->m_faces.size();++i)
{
auto faces = softBody->m_faces;
btSoftBody::Node* node_0=faces[i].m_n[0];
btSoftBody::Node* node_1=faces[i].m_n[1];
btSoftBody::Node* node_2=faces[i].m_n[2];
const int indices[] =
{
int(node_0-&nodes[0]),
int(node_1-&nodes[0]),
int(node_2-&nodes[0])
};
for(int j=0;j<3;++j)
buffer->Indices.push_back(indices[j]);
}
buffer->recalculateBoundingBox();
// Default the mesh to stream because most likely we will be updating
// the vertex positions every frame to deal with softbody movement.
buffer->setHardwareMappingHint(EHM_STREAM);
SMesh* mesh = new SMesh();
mesh->addMeshBuffer(buffer);
mesh->recalculateBoundingBox();
buffer->drop();
return mesh;
}
//! reads a mesh sections and creates a mesh from it
IAnimatedMesh* CIrrMeshFileLoader::readMesh(io::IXMLReader* reader)
{
SAnimatedMesh* animatedmesh = new SAnimatedMesh();
SMesh* mesh = new SMesh();
animatedmesh->addMesh(mesh);
mesh->drop();
core::stringc bbSectionName = "boundingBox";
core::stringc bufferSectionName = "buffer";
core::stringc meshSectionName = "mesh";
if (!reader->isEmptyElement())
while(reader->read())
{
if (reader->getNodeType() == io::EXN_ELEMENT)
{
const wchar_t* nodeName = reader->getNodeName();
if (bbSectionName == nodeName)
{
// inside a bounding box, ignore it for now because
// we are calculating this anyway ourselves later.
}
else
if (bufferSectionName == nodeName)
{
// we've got a mesh buffer
IMeshBuffer* buffer = readMeshBuffer(reader);
if (buffer)
{
mesh->addMeshBuffer(buffer);
buffer->drop();
}
}
else
skipSection(reader, true); // unknown section
} // end if node type is element
else
if (reader->getNodeType() == io::EXN_ELEMENT_END)
{
if (meshSectionName == reader->getNodeName())
{
// end of mesh section reached, cancel out
break;
}
}
} // end while reader->read();
mesh->recalculateBoundingBox();
animatedmesh->recalculateBoundingBox();
return animatedmesh;
}
irr::scene::IMesh* CGWIC_Cell::TerrainToMesh(int LOD)
{
SMesh* out = new SMesh();
CDynamicMeshBuffer* buff = new CDynamicMeshBuffer(EVT_2TCOORDS,EIT_16BIT);
terrain->getMeshBufferForLOD(*buff,LOD);
const u32 vertCnt = buff->getVertexCount();
S3DVertex2TCoords* mbv = reinterpret_cast<S3DVertex2TCoords*> (buff->getVertexBuffer().getData());
vector3df scale = terrain->getScale();
for (u32 i=0; i<vertCnt; i++) mbv[i].Pos *= scale;
out->addMeshBuffer(buff);
out->recalculateBoundingBox();
buff->drop();
terrain->setPosition(terrain->getPosition());
return out;
}
// creates a hill plane
IAnimatedMesh* CGeometryCreator::createHillPlaneMesh(const core::dimension2d<f32>& tileSize, const core::dimension2d<s32>& tc,
video::SMaterial* material, f32 hillHeight, const core::dimension2d<f32>& ch,
const core::dimension2d<f32>& textureRepeatCount)
{
core::dimension2d<s32> tileCount = tc;
tileCount.Height += 1;
tileCount.Width += 1;
core::dimension2d<f32> countHills = ch;
SMeshBuffer* buffer = new SMeshBuffer();
SMesh* mesh = new SMesh();
video::S3DVertex vtx;
vtx.Color.set(255,255,255,255);
vtx.Normal.set(0,0,0);
if (countHills.Width < 0.01f) countHills.Width = 1;
if (countHills.Height < 0.01f) countHills.Height = 1;
f32 halfX = (tileSize.Width * tileCount.Width) / 2;
f32 halfY = (tileSize.Height * tileCount.Height) / 2;
// create vertices
s32 x = 0;
s32 y = 0;
core::dimension2d<f32> tx;
tx.Width = 1.0f / (tileCount.Width / textureRepeatCount.Width);
tx.Height = 1.0f / (tileCount.Height / textureRepeatCount.Height);
for (x=0; x<tileCount.Width; ++x)
for (y=0; y<tileCount.Height; ++y)
{
vtx.Pos.set(tileSize.Width * x - halfX, 0, tileSize.Height * y - halfY);
vtx.TCoords.set(-(f32)x * tx.Width, (f32)y * tx.Height);
if (hillHeight)
vtx.Pos.Y = (f32)(sin(vtx.Pos.X * countHills.Width * engine::core::PI / halfX) *
cos(vtx.Pos.Z * countHills.Height * engine::core::PI / halfY))
*hillHeight;
buffer->Vertices.push_back(vtx);
}
// create indices
for (x=0; x<tileCount.Width-1; ++x)
for (y=0; y<tileCount.Height-1; ++y)
{
s32 current = y*tileCount.Width + x;
buffer->Indices.push_back(current);
buffer->Indices.push_back(current + 1);
buffer->Indices.push_back(current + tileCount.Width);
buffer->Indices.push_back(current + 1);
buffer->Indices.push_back(current + 1 + tileCount.Width);
buffer->Indices.push_back(current + tileCount.Width);
}
// recalculate normals
for (s32 i=0; i<(s32)buffer->Indices.size(); i+=3)
{
core::plane3d<f32> p(
buffer->Vertices[buffer->Indices[i+0]].Pos,
buffer->Vertices[buffer->Indices[i+1]].Pos,
buffer->Vertices[buffer->Indices[i+2]].Pos);
p.Normal.normalize();
buffer->Vertices[buffer->Indices[i+0]].Normal = p.Normal;
buffer->Vertices[buffer->Indices[i+1]].Normal = p.Normal;
buffer->Vertices[buffer->Indices[i+2]].Normal = p.Normal;
}
if (material)
buffer->Material = *material;
buffer->recalculateBoundingBox();
SAnimatedMesh* animatedMesh = new SAnimatedMesh();
mesh->addMeshBuffer(buffer);
mesh->recalculateBoundingBox();
animatedMesh->addMesh(mesh);
animatedMesh->recalculateBoundingBox();
mesh->drop();
buffer->drop();
return animatedMesh;
}
irr::scene::IMesh* MeshTools::createHillMesh(SurfaceQuadTree& tree, rectf section, double min_height, double max_height)
{
std::vector<PsblVertPtr> triangles;
/*
tree.split(1);
auto ptr = tree.child[1];
for (int i=0; i<2; ++i)
{
ptr->split(1);
ptr = ptr->child[3*(i+1)%4];
}
ptr = tree.child[2];
for (int i=0; i<5; ++i)
{
ptr->split(1);
ptr = ptr->child[3*(i+1)%4];
}
*/
struct Visitor : public SurfaceQuadTree::Visitor
{
vector<pair<QuadTreePtr, QuadTreePtr>> pairs;
typedef tuple<QuadTreePtr, QuadTreePtr> edge;
typedef vector<edge> triangle;
vector<triangle> triangles;
typedef vector<triangle>::const_iterator triangle_iter;
std::map<edge, vector<triangle>> edge_to_triangle;
bool crosses(edge e1, edge e2)
{
// Ignore if the edges share a vertex; that is not a crossing.
if (
get<0>(e1)->vert == get<0>(e2)->vert ||
get<0>(e1)->vert == get<1>(e2)->vert ||
get<1>(e1)->vert == get<0>(e2)->vert ||
get<1>(e1)->vert == get<1>(e2)->vert
)
return false;
// line2d(T xa, T ya, T xb, T yb)
vector3df pos1a = get<0>(e1)->vert->getPos();
vector3df pos1b = get<1>(e1)->vert->getPos();
line2df line1(pos1a.X, pos1a.Y, pos1b.X, pos1b.Y);
vector3df pos2a = get<0>(e2)->vert->getPos();
vector3df pos2b = get<1>(e2)->vert->getPos();
line2df line2(pos2a.X, pos2a.Y, pos2b.X, pos2b.Y);
vector2df out;
return line1.intersectWith(line2, out);
}
bool compareEdge(edge e, std::string from, std::string to)
{
return
get<0>(e)->getPath() == from &&
get<1>(e)->getPath() == to;
}
bool findEdge(triangle t, std::string from, std::string to)
{
return compareEdge(t[0], from, to) || compareEdge(t[1], from, to) || compareEdge(t[2], from, to);
}
virtual void addTriangle(QuadTreePtr a, QuadTreePtr b, QuadTreePtr c)
{
// If a,b,c already in triangles, duplicate triangle error.
// foreach edge in the new triangle,
// find other triangles that share one edge with this one
// test the other 2x2 edges for intersection.
triangle new_triangle(
{
make_tuple(a,b), make_tuple(b,c), make_tuple(c,a)
});
//if (findEdge(new_triangle, "Root SW SW SW NW SE", "Root SW SW SW NW NW"))
// cout << "found" << endl;
//if (findEdge(new_triangle, "Root SW SW SW NW NE", "Root SW SW SW NW SW"))
// cout << "found" << endl;
for (edge e_same : new_triangle)
for (edge e_check : new_triangle)
if (e_same != e_check)
for (triangle contiguous : edge_to_triangle[e_same])
for (edge e_existing : contiguous)
if (e_existing != e_same)
if (crosses(e_check, e_existing))
{
cout << "detected crossing, new is " << get<0>(e_check)->getPath() << "-" << get<1>(e_check)->getPath()
<< " old is " << get<0>(e_existing)->getPath() << "-" << get<1>(e_existing)->getPath() << endl;
}
triangles.push_back(new_triangle);
edge_to_triangle[make_tuple(a,b)].push_back(new_triangle);
edge_to_triangle[make_tuple(b,c)].push_back(new_triangle);
edge_to_triangle[make_tuple(c,a)].push_back(new_triangle);
edge_to_triangle[make_tuple(b,a)].push_back(new_triangle);
edge_to_triangle[make_tuple(c,b)].push_back(new_triangle);
edge_to_triangle[make_tuple(a,c)].push_back(new_triangle);
}
virtual void check(QuadTreePtr a1, QuadTreePtr a2, QuadTreePtr b1, QuadTreePtr b2)
{
}
};
Visitor visitor;
tree.triangulate(triangles, section, min_height, max_height, &visitor);
//tree.sweep(triangles, section, &visitor);
//cout << "num triangle points: " << triangles.size() << endl;
vector<QuadTreePtr> leaves;
tree.dumpLeaves(leaves);
//cout << "num leaves: " << leaves.size() << endl;
/*
for (QuadTreePtr p1 : leaves)
for (QuadTreePtr p2 : leaves)
if (p1 != p2)
if (p1->isAdjacent(p2))
if (!visitor.has(p1, p2))
{
auto sz1 = p1->region.getSize();
auto sz2 = p2->region.getSize();
auto c1 = p1->region.getCenter();
auto c2 = p2->region.getCenter();
char const* path1 = p1->getPath().c_str();
char const* path2 = p2->getPath().c_str();
cout << path1 << endl;
cout << path2 << endl;
cout << "Missing pair of adjacent vertices." << endl;
}
float x1 = section.UpperLeftCorner.X;
float x2 = section.LowerRightCorner.X;
float y1 = section.UpperLeftCorner.Y;
float y2 = section.LowerRightCorner.Y;
*/
/*
d---c
| / |
a---b
*/
/*
S3DVertex sa;
sa.Pos = vector3df(x1, y1, 0);
PsblVertPtr a = new PossibleVertex(sa);
S3DVertex sb;
sb.Pos = vector3df(x2, y1, 0);
PsblVertPtr b = new PossibleVertex(sb);
S3DVertex sc;
sc.Pos = vector3df(x2, y2, 0);
PsblVertPtr c = new PossibleVertex(sc);
S3DVertex sd;
sd.Pos = vector3df(x1, y2, 0);
PsblVertPtr d = new PossibleVertex(sd);
// a-b-c
// a-c-d
triangles.push_back(a);
triangles.push_back(b);
triangles.push_back(c);
triangles.push_back(a);
triangles.push_back(c);
triangles.push_back(d);
triangles.push_back(c);
triangles.push_back(b);
triangles.push_back(a);
triangles.push_back(d);
triangles.push_back(c);
triangles.push_back(a);
*/
SMeshBuffer* buffer = new SMeshBuffer();
for (auto pv : triangles)
pv->addToMeshBuf(buffer, vector3df());
if (buffer->getIndexCount() % 3 > 0)
throw std::logic_error("SurfaceQuadTree triangulation added a 'triangle' with less than 3 vertices in it.");
//cout << "num vertices " << buffer->getVertexCount() << endl;
//cout << "num indices " << buffer->getIndexCount() << endl;
buffer->recalculateBoundingBox();
buffer->setHardwareMappingHint(EHM_STATIC);
SMesh* mesh = new SMesh();
mesh->addMeshBuffer(buffer);
mesh->recalculateBoundingBox();
buffer->drop();
return mesh;
}
//! creates/loads an animated mesh from the file.
//! \return Pointer to the created mesh. Returns 0 if loading failed.
//! If you no longer need the mesh, you should call IAnimatedMesh::drop().
//! See IReferenceCounted::drop() for more information.
IAnimatedMesh* CSTLMeshFileLoader::createMesh(io::IReadFile* file)
{
const long filesize = file->getSize();
if (filesize < 6) // we need a header
return 0;
const u32 WORD_BUFFER_LENGTH = 512;
SMesh* mesh = new SMesh();
SMeshBuffer* meshBuffer = new SMeshBuffer();
mesh->addMeshBuffer(meshBuffer);
meshBuffer->drop();
core::vector3df vertex[3];
core::vector3df normal;
c8 buffer[WORD_BUFFER_LENGTH];
bool binary = false;
file->read(buffer, 5);
if (strncmp("solid", buffer, 5))
binary = true;
// read/skip header
u32 binFaceCount = 0;
if (binary)
{
file->seek(80);
file->read(&binFaceCount, 4);
#ifdef __BIG_ENDIAN__
binFaceCount = os::Byteswap::byteswap(binFaceCount);
#endif
}
else
goNextLine(file);
u16 attrib=0;
core::stringc token;
token.reserve(32);
while (file->getPos() < filesize)
{
if (!binary)
{
if (getNextToken(file, token) != "facet")
{
if (token=="endsolid")
break;
mesh->drop();
return 0;
}
if (getNextToken(file, token) != "normal")
{
mesh->drop();
return 0;
}
}
getNextVector(file, normal, binary);
if (!binary)
{
if (getNextToken(file, token) != "outer")
{
mesh->drop();
return 0;
}
if (getNextToken(file, token) != "loop")
{
mesh->drop();
return 0;
}
}
for (u32 i=0; i<3; ++i)
{
if (!binary)
{
if (getNextToken(file, token) != "vertex")
{
mesh->drop();
return 0;
}
}
getNextVector(file, vertex[i], binary);
}
if (!binary)
{
if (getNextToken(file, token) != "endloop")
{
mesh->drop();
return 0;
}
if (getNextToken(file, token) != "endfacet")
{
mesh->drop();
return 0;
}
}
else
{
file->read(&attrib, 2);
#ifdef __BIG_ENDIAN__
attrib = os::Byteswap::byteswap(attrib);
#endif
}
SMeshBuffer* mb = reinterpret_cast<SMeshBuffer*>(mesh->getMeshBuffer(mesh->getMeshBufferCount()-1));
u32 vCount = mb->getVertexCount();
video::SColor color(0xffffffff);
if (attrib & 0x8000)
color = video::A1R5G5B5toA8R8G8B8(attrib);
if (normal==core::vector3df())
normal=core::plane3df(vertex[2],vertex[1],vertex[0]).Normal;
mb->Vertices.push_back(video::S3DVertex(vertex[2],normal,color, core::vector2df()));
mb->Vertices.push_back(video::S3DVertex(vertex[1],normal,color, core::vector2df()));
mb->Vertices.push_back(video::S3DVertex(vertex[0],normal,color, core::vector2df()));
mb->Indices.push_back(vCount);
mb->Indices.push_back(vCount+1);
mb->Indices.push_back(vCount+2);
} // end while (file->getPos() < filesize)
mesh->getMeshBuffer(0)->recalculateBoundingBox();
// Create the Animated mesh if there's anything in the mesh
SAnimatedMesh* pAM = 0;
if ( 0 != mesh->getMeshBufferCount() )
{
mesh->recalculateBoundingBox();
pAM = new SAnimatedMesh();
pAM->Type = EAMT_OBJ;
pAM->addMesh(mesh);
pAM->recalculateBoundingBox();
}
mesh->drop();
return pAM;
}
IMeshSceneNode* CustomSceneNodeManager::CreateConeSceneNode(scene::ISceneManager* sceneManager, s32 id, SColor& color, unsigned int resolution, float radius, float height)
{
if (resolution >= 4)
{
/*IMesh* newConeMesh = sceneManager->getGeometryCreator()->createConeMesh(radius, height, resolution, color, color);
IMeshSceneNode* node = sceneManager->addMeshSceneNode(newConeMesh);
sceneManager->getMeshCache()->addMesh(irr::io::path("ConeMesh"), (irr::scene::IAnimatedMesh*)newConeMesh);
newConeMesh->drop();*/
SMesh* newConeMesh = new SMesh();
SMeshBuffer* buf = new SMeshBuffer();
newConeMesh->addMeshBuffer(buf);
buf->MappingHint_Vertex = EHM_STATIC;
buf->MappingHint_Index = EHM_STATIC;
buf->drop();
int noWarningSignedResolution = resolution;
float currentTheta = 0.0f;
float skipAmount = 2.0f*PI / (float)resolution;
float halfHeight = height / 2.0f;
S3DVertex temp1 = S3DVertex(Vector3(0.0f, halfHeight, 0.0f), Vector3_Zero, color, vector2d<f32>(0.0f, 0.0f));
S3DVertex temp2 = S3DVertex(Vector3(0.0f, -halfHeight, 0.0f), Vector3_Zero, color, vector2d<f32>(0.0f, 1.0f));
for(int i = 0; i < noWarningSignedResolution; i++)
{
float x = cosf(currentTheta) * radius;
float z = sinf(currentTheta) * radius;
temp2.Pos.X = x;
temp2.Pos.Z = z;
temp2.TCoords.X = currentTheta / 2.0f*PI;
buf->Vertices.push_back(temp2);
currentTheta += skipAmount;
}
buf->Vertices.push_back(temp1);
//Get side indices
for(int i = 0; i < noWarningSignedResolution - 1; i++)
{
buf->Indices.push_back(i);
buf->Indices.push_back(buf->Vertices.size()-1);
buf->Indices.push_back(i+1);
}
buf->Indices.push_back(buf->Vertices.size()-2);
buf->Indices.push_back(buf->Vertices.size()-1);
buf->Indices.push_back(0);
temp2.Pos.X = 0.0f;
temp2.Pos.Z = 0.0f;
buf->Vertices.push_back(temp2);
//Get bottom indices
for(int i = 0; i < noWarningSignedResolution - 1; i++)
{
buf->Indices.push_back(i);
buf->Indices.push_back(i+1);
buf->Indices.push_back(buf->Vertices.size()-1);
}
buf->Indices.push_back(buf->Vertices.size()-1);
buf->Indices.push_back(buf->Vertices.size()-3);
buf->Indices.push_back(0);
//Calculate normals
CalculateNormals(buf->Vertices, buf->Indices);
buf->recalculateBoundingBox();
newConeMesh->recalculateBoundingBox();
IMeshSceneNode* node = sceneManager->addMeshSceneNode(newConeMesh);
newConeMesh->drop();
return node;
}
return NULL;
}
IMeshSceneNode* CustomSceneNodeManager::CreateCapsuleSceneNode(scene::ISceneManager* sceneManager, s32 id, SColor& color, unsigned int resolution, float radius, float heightFromSphereCenters)
{
if (resolution >= 4)
{
SMesh* newCapsuleMesh = new SMesh();
SMeshBuffer* buf = new SMeshBuffer();
newCapsuleMesh->addMeshBuffer(buf);
buf->MappingHint_Vertex = EHM_STATIC;
buf->MappingHint_Index = EHM_STATIC;
buf->drop();
int noWarningSignedResolution = resolution;
float thetaSkipAmount = 2.0f*PI / (float)resolution;
float halfHeight = heightFromSphereCenters / 2.0f;
float phiSkipAmount = PI*0.5f / (float)resolution;
S3DVertex temp1 = S3DVertex(Vector3(0.0f, halfHeight, 0.0f), Vector3_Zero, color, vector2d<f32>(0.0f, 0.0f));
S3DVertex temp2 = S3DVertex(Vector3(0.0f, -halfHeight, 0.0f), Vector3_Zero, color, vector2d<f32>(0.0f, 1.0f));
float currentTheta = 0.0f;
float currentPhi = phiSkipAmount;
temp1.Pos.Y = halfHeight + radius;
buf->Vertices.push_back(temp1);
//Semi-sphere Tips
for(unsigned int i = 1; i < resolution; i++)
{
for(unsigned int j = 0; j < resolution; j++)
{
float x = sinf(currentPhi) * cosf(currentTheta) * radius;
float y = cosf(currentPhi) * radius;
float z = sinf(currentPhi) * sinf(currentTheta) * radius;
temp1.Pos.X = x;
temp1.Pos.Y = y + halfHeight;
temp1.Pos.Z = z;
temp1.TCoords.X = currentTheta / 2.0f*PI;
temp1.TCoords.Y = currentPhi / PI;
buf->Vertices.push_back(temp1);
currentTheta += thetaSkipAmount;
}
currentTheta = 0.0f;
currentPhi += phiSkipAmount;
}
currentTheta = 0.0f;
currentPhi = PI/2.0f;
//Semi-sphere Tips
for(unsigned int i = 1; i < resolution; i++)
{
for(unsigned int j = 0; j < resolution; j++)
{
float x = sinf(currentPhi) * cosf(currentTheta) * radius;
float y = cosf(currentPhi) * radius;
float z = sinf(currentPhi) * sinf(currentTheta) * radius;
temp1.Pos.X = x;
temp1.Pos.Y = y - halfHeight;
temp1.Pos.Z = z;
temp1.TCoords.X = currentTheta / 2.0f*PI;
temp1.TCoords.Y = currentPhi / PI;
buf->Vertices.push_back(temp1);
currentTheta += thetaSkipAmount;
}
currentTheta = 0.0f;
currentPhi += phiSkipAmount;
}
temp1.Pos.X = 0.0f;
temp1.Pos.Y = -(halfHeight + radius);
temp1.Pos.Z = 0.0f;
buf->Vertices.push_back(temp1);
//Top vertex indices
for(unsigned int i = 1; i <= resolution; i++)
{
if (i == resolution)
{
buf->Indices.push_back(i);
buf->Indices.push_back(0);
buf->Indices.push_back(1);
}
else
{
buf->Indices.push_back(i);
buf->Indices.push_back(0);
buf->Indices.push_back(i + 1);
}
}
//Get indices
int i = 1 + resolution;
while(i < buf->Vertices.size() - 1)
{
for(unsigned int j = 1; j < resolution; j++)
{
buf->Indices.push_back(i);
buf->Indices.push_back(i - noWarningSignedResolution);
buf->Indices.push_back(i - noWarningSignedResolution + 1);
buf->Indices.push_back(i);
buf->Indices.push_back(i - noWarningSignedResolution + 1);
buf->Indices.push_back(i + 1);
i++;
}
buf->Indices.push_back(i);
buf->Indices.push_back(i - noWarningSignedResolution);
buf->Indices.push_back(i - noWarningSignedResolution + 1 - resolution);
buf->Indices.push_back(i);
buf->Indices.push_back(i - noWarningSignedResolution + 1 - resolution);
buf->Indices.push_back(i + 1 - resolution);
i++;
}
//Bottom vertex indices
for(int i = resolution; i >= 1 ; i--)
{
if (i == 1)
{
/*buf->Indices.push_back(i);
buf->Indices.push_back(0);
buf->Indices.push_back(1);*/
buf->Indices.push_back(buf->Vertices.size() -1);
buf->Indices.push_back(buf->Vertices.size() -1 - i);
buf->Indices.push_back(buf->Vertices.size() - 1 - resolution);
}
else
{
buf->Indices.push_back(buf->Vertices.size() -1);
buf->Indices.push_back(buf->Vertices.size() -1 - i);
buf->Indices.push_back(buf->Vertices.size() - i);
}
}
//Calculate normals
CalculateNormals(buf->Vertices, buf->Indices);
buf->recalculateBoundingBox();
newCapsuleMesh->recalculateBoundingBox();
IMeshSceneNode* node = sceneManager->addMeshSceneNode(newCapsuleMesh);
newCapsuleMesh->drop();
return node;
}
return NULL;
}
IMesh* MeshTools::createMeshFromHeightmap(IImage* image, dimension2du tileSizeInPixels, vector2di tilePosInTiles, bool extraStripsOnEdges)
{
// Use top corner of image to get bias for centering the Z axis.
float imageZeroBias = image->getPixel(0,0).getAverage();
dimension2du imageDimension = image->getDimension();
// Easier to think of script working in whole tile units, so handle conversion to pixel pos in this method:
vector2di startAtPixel = tilePosInTiles * vector2di(tileSizeInPixels.Width, tileSizeInPixels.Height);
// However we're going to invert the image Y axis so that the bottom of the picture will be at 0,0 in world space,
// and the top of the picture will be at +Y in world space.
startAtPixel.Y = (imageDimension.Height-1) - startAtPixel.Y;
// Return nothing if the tile is outside the image, or if the resulting mesh would have only 0 or 1 rows or columns.
// Doing this check early prevents getting underflow when we clip the tile size to the image dimensions a few statements down.
if (startAtPixel.X < 0 || startAtPixel.X >= (imageDimension.Width-1) || startAtPixel.Y <= 0 || startAtPixel.Y > (imageDimension.Height-1))
return NULL;
// Calculate whether to use tile size or tile size + 1 (for generating overlap)
// Adding the extra strip amount before clipping to image dimensions prevents overflowing the image edges after clipping.
dimension2du useTileSize = tileSizeInPixels + (extraStripsOnEdges? dimension2du(1,1) : dimension2du(0,0));
// Clip the tile size if we're dealing with a "leftover" amount at the edge that's not a whole tile's width or height.
// Most heightmap implementations require exactly a power of 2 + 1 square dimensions like 257x257, but supporting
// image sizes that are not whole multiples of tile size is as simple as this one line of code and supporting
// image sizes that are not square is a nice feature for a platformer game so you can have levels that are longer
// than they are tall.
useTileSize.set(min(useTileSize.Width, imageDimension.Width-startAtPixel.X), min(useTileSize.Height, (u32)startAtPixel.Y+1));
SMeshBuffer* buffer = new SMeshBuffer();
// Preallocate vertex buffer to the size we know we'll need.
buffer->Vertices.set_used(useTileSize.Width*useTileSize.Height);
// Amount of TCoord per unit of x,y in image.
vector2df tCoordsScale(1.0f / useTileSize.Width, 1.0f / useTileSize.Height);
// Whether we put y on the outside or x on the outside, doesn't matter, because we are
// using getIndex() to find where x and y map too. However, I happen to know I made getIndex
// put x's together, y in rows, and looping in the same rank order might have better cache performance
// because it should access the vertices in the same order they are in the array.
for (u32 y=0; y < useTileSize.Height; ++y)
{
for (u32 x=0; x < useTileSize.Width; ++x)
{
u32 index = getIndex(useTileSize, x, y);
S3DVertex& vert = buffer->Vertices[index];
// No special coloration
vert.Color = SColor(255,255,255,255);
// Scale texture to tile.
vert.TCoords = vector2df(x,y) * tCoordsScale;
// y axis starts with 0 at image bottom and goes up.
vector2di pixelPos(
startAtPixel.X+x,
startAtPixel.Y-y
);
SColor heightColor = image->getPixel(pixelPos.X, pixelPos.Y);
float thisHeight = imageZeroBias - heightColor.getAverage();
vert.Pos.set(x, y, thisHeight);
// I'm only averaging normals along the 4 compass directions. It's
// arguable whether diagonals should count; I chose to ignore diagonals.
// Ignoring diagonals allows me to assume the "run" in rise/run is always
// just one unit; if you add diagonals here you'll also need to change
// the slope calculation to use the actual distance instead of assuming 1.
vector2di offsetsArray[] = {
vector2di( 1, 0), // 3 o'clock
vector2di( 0, 1), // 12 o'clock
vector2di(-1, 0), // 9 o'clock
vector2di( 0,-1) // 6 o'clock
};
// Calculate the normals of the surrounding slopes.
// Uses the image, not just the tile patch size, so it will
// calculate correct normals for vertices on tile edges.
for (size_t i=-0; i < 4; ++i)
{
vector2di offset = vector2di(x,y) + offsetsArray[i];
// Skip this offset if it's outside the image
if (offset.X < 0 || offset.Y < 0 || offset.X >= (s32)imageDimension.Width || offset.Y >= (s32)imageDimension.Height)
continue;
vector2di otherPixelPos(
startAtPixel.X+x+offset.X,
startAtPixel.Y-y-offset.Y
);
float otherHeight = 255 - image->getPixel((u32)otherPixelPos.X, (u32)otherPixelPos.Y).getAverage();
// The code Irrlicht's in terrain scene node does all kinds of complicated
// business with cross products and such - waaay over complicated. You don't need
// all that stuff. Dude it' s a heightmap: all you need to worray about is
// rise over run on unit intervals! Algebra 1 type stuff, y = mx + c
// Calculate the rise of the line over the run, taking into account the fact
// that the offset could be in either direction.
float rise = (offset.X < 0 || offset.Y < 0)? thisHeight - otherHeight : otherHeight - thisHeight;
// Assuming that run = 1, m = rise / run is just m = rise.
float m = rise;
// The the slope of the normal is just the negative of the reciprocal of the line slope.
float n = -1.0f / rise;
// The X,Y of the normal vector is just going to be the X and Y of the offset
// (think about it - obviously the normal of the slope must tilt in the direction of the run)
// and the Z of the normal vector is just the slope of the normal over that run.
vector3df normVect(offset.X, offset.Y, n);
//vert.Normal += normVect;
}
//vert.Normal.normalize();
vert.Normal.set(0,0,-1.0f);
}
}
// Pre-allocate index data to 2*3*Width*Height for triangles.
// There is actually 1 less square per count of vertices though,
// for instance if you had 2x2 vertices, you only have 1 square.
buffer->Indices.set_used(2*3*(useTileSize.Width-1)*(useTileSize.Height-1));
// Start with 1 and generate all the triangles from their top right corners.
// Like this (A is top right corner at x,y):
//
// y=1 B---A
// | / |
// y=0 C---D
// x=0 x=1
for (u32 dst=0, x=1; x < useTileSize.Width; ++x)
{
for (u32 y=1; y < useTileSize.Height; ++y)
{
u32 A = getIndex(useTileSize, x, y );
u32 B = getIndex(useTileSize, x-1, y );
u32 C = getIndex(useTileSize, x-1, y-1 );
u32 D = getIndex(useTileSize, x, y-1 );
buffer->Indices[dst++] = C;
buffer->Indices[dst++] = B;
buffer->Indices[dst++] = A;
buffer->Indices[dst++] = D;
buffer->Indices[dst++] = C;
buffer->Indices[dst++] = A;
}
}
buffer->recalculateBoundingBox();
buffer->setHardwareMappingHint(EHM_STATIC);
SMesh* mesh = new SMesh();
mesh->addMeshBuffer(buffer);
mesh->recalculateBoundingBox();
buffer->drop();
return mesh;
}
GLlink(ISceneNode *i_parent, ISceneManager *i_mgr, s32 i_id,
const LinkInfo &i_li, BodyInfo_var i_binfo) :
ISceneNode(i_parent, i_mgr, i_id),
m_jointId(i_li.jointId) {
setAutomaticCulling(scene::EAC_OFF);
setPosition(vector3df( i_li.translation[0],
-i_li.translation[1],
i_li.translation[2]));
Vector3 axis(i_li.rotation[0],
i_li.rotation[1],
i_li.rotation[2]);
Matrix33 R;
hrp::calcRodrigues(R, axis, i_li.rotation[3]);
Vector3 rpy(rpyFromRot(R));
//std::cout << "rpy:" << rpy << std::endl;
setRotation(vector3df(-180/M_PI*rpy[0],
180/M_PI*rpy[1],
-180/M_PI*rpy[2]));
m_axis << i_li.jointAxis[0], i_li.jointAxis[1], i_li.jointAxis[2];
ShapeInfoSequence_var sis = i_binfo->shapes();
AppearanceInfoSequence_var ais = i_binfo->appearances();
MaterialInfoSequence_var mis = i_binfo->materials();
TextureInfoSequence_var txs = i_binfo->textures();
const TransformedShapeIndexSequence& tsis = i_li.shapeIndices;
core::vector3df vertex;
core::vector3df normal;
for (unsigned int l=0; l<tsis.length(); l++) {
SMesh* mesh = new SMesh();
SMeshBuffer* meshBuffer = new SMeshBuffer();
mesh->addMeshBuffer(meshBuffer);
meshBuffer->drop();
const TransformedShapeIndex &tsi = tsis[l];
short index = tsi.shapeIndex;
ShapeInfo& si = sis[index];
const float *vertices = si.vertices.get_buffer();
const LongSequence& triangles = si.triangles;
const AppearanceInfo& ai = ais[si.appearanceIndex];
const float *normals = ai.normals.get_buffer();
//std::cout << "length of normals = " << ai.normals.length() << std::endl;
const LongSequence& normalIndices = ai.normalIndices;
//std::cout << "length of normalIndices = " << normalIndices.length() << std::endl;
const int numTriangles = triangles.length() / 3;
//std::cout << "numTriangles = " << numTriangles << std::endl;
video::SColor color(0xffffffff);
if (ai.colors.length()) {
color.set(0xff,
0xff*ai.colors[0],
0xff*ai.colors[1],
0xff*ai.colors[2]);
} else if (ai.materialIndex >= 0) {
const MaterialInfo& mi = mis[ai.materialIndex];
color.set(0xff,
0xff*mi.diffuseColor[0],
0xff*mi.diffuseColor[1],
0xff*mi.diffuseColor[2]);
} else {
std::cout << "no material" << std::endl;
}
SMeshBuffer* mb = reinterpret_cast<SMeshBuffer*>(mesh->getMeshBuffer(mesh->getMeshBufferCount()-1));
u32 vCount = mb->getVertexCount();
const DblArray12& tfm = tsi.transformMatrix;
CMatrix4<f32> cmat;
for (int i=0; i<3; i++) {
for (int j=0; j<4; j++) {
cmat[j*4+i] = tfm[i*4+j];
}
}
cmat[3] = cmat[7] = cmat[11] = 0.0;
cmat[15] = 1.0;
vector3df pos = cmat.getTranslation();
pos.Y *= -1;
vector3df rpy = cmat.getRotationDegrees();
rpy.X *= -1;
rpy.Z *= -1;
vector3df scale = cmat.getScale();
const float *textureCoordinate = NULL;
if (ai.textureIndex >= 0) {
textureCoordinate = ai.textureCoordinate.get_buffer();
//std::cout << "length of textureCoordinate:" << ai.textureCoordinate.length() << std::endl;
//std::cout << "length of vertices:" << si.vertices.length() << std::endl;
}
for(int j=0; j < numTriangles; ++j) {
if (!ai.normalPerVertex) {
int p;
if (normalIndices.length() == 0) {
p = j*3;
} else {
p = normalIndices[j]*3;
}
if ( normals != NULL ) {
normal.X = normals[p];
normal.Y = -normals[p+1]; //left-handed->right-handed
normal.Z = normals[p+2];
} else {
normal.X = 0;
normal.Y = 0;
normal.Z = 1;
}
}
for(int k=0; k < 3; ++k) {
long orgVertexIndex = si.triangles[j * 3 + k];
if (ai.normalPerVertex) {
int p;
if (normalIndices.length()) {
p = normalIndices[j*3+k]*3;
} else {
p = orgVertexIndex*3;
}
normal.X = normals[p];
normal.Y = -normals[p+1]; //left-handed -> right-handed
normal.Z = normals[p+2];
}
int p = orgVertexIndex * 3;
vertex.X = scale.X*vertices[p];
vertex.Y = -scale.Y*vertices[p+1]; // left-handed -> right-handed
vertex.Z = scale.Z*vertices[p+2];
//std::cout << vertices[p] <<"," << vertices[p+1] << "," << vertices[p+2] << std::endl;
vector2df texc;
if (textureCoordinate) {
texc.X = textureCoordinate[ai.textureCoordIndices[j*3+k]*2];
texc.Y = textureCoordinate[ai.textureCoordIndices[j*3+k]*2+1];
}
// redundant vertices
mb->Vertices.push_back(video::S3DVertex(vertex,normal,color, texc));
}
mb->Indices.push_back(vCount);
mb->Indices.push_back(vCount+2);
mb->Indices.push_back(vCount+1);
vCount += 3;
}
mesh->getMeshBuffer(0)->recalculateBoundingBox();
// Create the Animated mesh if there's anything in the mesh
SAnimatedMesh* pAM = 0;
if ( 0 != mesh->getMeshBufferCount() )
{
mesh->recalculateBoundingBox();
pAM = new SAnimatedMesh();
pAM->Type = EAMT_OBJ;
pAM->addMesh(mesh);
pAM->recalculateBoundingBox();
}
mesh->drop();
vector3df noscale(1,1,1);
IMeshSceneNode *node
= i_mgr->addMeshSceneNode(mesh, this, -1,
pos,
rpy,
noscale);
if (ai.textureIndex >= 0) {
const TextureInfo& ti = txs[ai.textureIndex];
//std::cout << "url:" << ti.url << std::endl;
video::IVideoDriver* driver = i_mgr->getVideoDriver();
const char *path = ti.url;
SMaterial& mat = node->getMaterial(0);
ITexture *texture = driver->getTexture(path);
mat.setTexture( 0, texture);
}
}
const SensorInfoSequence& sensors = i_li.sensors;
for (unsigned int i=0; i<sensors.length(); i++) {
const SensorInfo& si = sensors[i];
std::string type(si.type);
if (type == "Vision") {
//std::cout << si.name << std::endl;
ISceneNode *camera = i_mgr->addEmptySceneNode(this);
camera->setName(si.name);
camera->setPosition(vector3df( si.translation[0],
-si.translation[1],
si.translation[2]));
Vector3 axis(si.rotation[0],
si.rotation[1],
si.rotation[2]);
Matrix33 R;
hrp::calcRodrigues(R, axis, si.rotation[3]);
Vector3 rpy(rpyFromRot(R));
camera->setRotation(vector3df(-180/M_PI*rpy[0],
180/M_PI*rpy[1],
-180/M_PI*rpy[2]));
m_cameraInfos.push_back(new GLcamera(si, camera));
}
}
}
MeshTools::SplitMeshResult MeshTools::splitMeshZ(IMesh* oldMesh, float zCut, float zInsert, bool marginalTrisInLeft, bool marginalTrisInRight)
{
IMeshBuffer* oldMeshBuf = oldMesh->getMeshBuffer(0);
u16* oldInd = oldMeshBuf->getIndices();
SMeshBuffer* leftMeshBuf = new SMeshBuffer();
SMeshBuffer* rightMeshBuf = new SMeshBuffer();
LinkSplitter linkSplitter(oldMeshBuf, zCut);
vector3df const offset(0,0, zInsert);
set<pair<PsblVertPtr, PsblVertPtr>> leftEdgeLinks;
set<pair<PsblVertPtr, PsblVertPtr>> rightEdgeLinks;
for (u32 i=0; i < oldMeshBuf->getIndexCount(); i += 3)
{
// Calling these shapes instead of triangles because they could be triangle or a quad after slice,
// (it could also be a degenerate case of a line or a point - those will be discarded by addConvexShape)
vector<PsblVertPtr> leftShape;
vector<PsblVertPtr> rightShape;
int a = oldInd[i];
int b = oldInd[i+1];
int c = oldInd[i+2];
PsblVertPtr mid1;
PsblVertPtr mid2;
PsblVertPtr mid3;
// Don't create a copy just for a triangle that is just kissing the edge. Leave it in the background.
if (linkSplitter.compareZ(a)==0 && linkSplitter.compareZ(b)==0 && linkSplitter.compareZ(c)==0)
{
if (marginalTrisInLeft)
{
leftShape.push_back(linkSplitter.getVert(a));
leftShape.push_back(linkSplitter.getVert(b));
leftShape.push_back(linkSplitter.getVert(c));
}
if (marginalTrisInRight)
{
rightShape.push_back(linkSplitter.getVert(a));
rightShape.push_back(linkSplitter.getVert(b));
rightShape.push_back(linkSplitter.getVert(c));
}
}
else
{
// This is something I had to think hard about so I'm writing this comment so I don't
// have to think it through again or forget it:
//
// Both the left shape and the right shape, and both the triangle and the quad, "magically"
// come out with correct winding order when the triangle is split. Here's why:
// Let the original triangle vertices be A-B-C.
// Let the split midpoints be AB' and CA' as A-B is split and C-A are split respectively.
// The shapes (ignore which shape is left or right, call them P and Q instead)
// will be filled in the following order:
//
// round P Q Comment
// 1 A - A is not in Q at all
// 1 cont. AB' AB' AB' replaces B in P
// 2 - B B proper is in Q and not in P
// 2 cont. - - Link B-C is not split
// 3 - C C proper is in Q and not in P
// 3 cont. CA' CA' CA' replaces C in P
//
// Now, read the columns P and Q vertically top to bottom to see the resultant vertex order.
// The triangle P is trivially still the correct winding order; it is just a smaller triangle now.
// The new quad Q retains the old triangle's winding order property for the following reason:
// As you wrapped around a full circle in old triangle A-B-C you would have traversed C-A then A-B.
// The link C-A has been cut and vertex CA' inserted.
// The link A-B has been cut and vertex AB' inserted.
// If you traverse the new shape starting from the _middle_ you follow the following path:
// B-C C-CA' CA'-AB' AB'-B B-C (again)
// Compare to old triangle:
// B-C C-A A-B B-C (again)
// Even though vertex A has been cut off and replaced with two vertices, the two
// new vertices lie along the path that the old links took and are in the new shape in the right order.
mid1 = linkSplitter.processLink(leftShape, rightShape, a, b);
mid2 = linkSplitter.processLink(leftShape, rightShape, b, c);
mid3 = linkSplitter.processLink(leftShape, rightShape, c, a);
}
// If a triangle was split then two of those three midpoints are inhabited by a vertex.
// We want to get them both in mid1 and mid2 AND we need them in correct order.
PsblVertPtr cut1 = (mid1 && mid2)? mid1 : mid2;
PsblVertPtr cut2 = (mid2 && mid3)? mid3 : mid2;
if (cut1 && cut2)
{
vector<PsblVertPtr> chain = linkSplitter.chopLink(cut1, cut2, 1);
linkSplitter.insertPoints(leftShape, cut1, cut2, chain);
linkSplitter.insertPoints(rightShape, cut1, cut2, chain);
}
linkSplitter.addConvexShape(leftShape, leftMeshBuf, -offset/2);
linkSplitter.addConvexShape(rightShape, rightMeshBuf, offset/2);
// Add any edges of the left shape that lie along the border.
linkSplitter.addEdgeLinks(leftShape, leftEdgeLinks);
// Right side polys that share a border with left side ones will have
// opposite winding order. In order for set_intersection to consider them
// as matches, we'll store the right side links in reversed order.
std::reverse(rightShape.begin(), rightShape.end());
linkSplitter.addEdgeLinks(rightShape, rightEdgeLinks);
}
SMesh* leftMesh = new SMesh();
leftMeshBuf->recalculateBoundingBox();
leftMeshBuf->setHardwareMappingHint(EHM_STATIC);
leftMesh->addMeshBuffer(leftMeshBuf);
leftMesh->recalculateBoundingBox();
leftMeshBuf->drop(); // we drop the buf, mesh obj has it now
SMesh* rightMesh = new SMesh();
rightMeshBuf->recalculateBoundingBox();
rightMeshBuf->setHardwareMappingHint(EHM_STATIC);
rightMesh->addMeshBuffer(rightMeshBuf);
rightMesh->recalculateBoundingBox();
rightMeshBuf->drop(); // we drop the buf, mesh obj has it now
SMesh* middleMesh = NULL;
if (zInsert > 0)
{
set<pair<PsblVertPtr,PsblVertPtr>> result;
std::set_intersection(
leftEdgeLinks.begin(), leftEdgeLinks.end(),
rightEdgeLinks.begin(), rightEdgeLinks.end(),
std::inserter(result, result.begin())
);
size_t debugsize = result.size();
if (result.size() > 0)
{
SMeshBuffer* middleMeshBuf = new SMeshBuffer();
vector<PsblVertPtr> shape(4);
for (auto it=result.begin(); it!=result.end(); ++it)
{
shape[0] = it->second;
shape[1] = it->first;
shape[2] = it->first->duplicate(offset);
shape[3] = it->second->duplicate(offset);
linkSplitter.addConvexShape(shape, middleMeshBuf, -offset/2);
}
middleMesh = new SMesh();
middleMeshBuf->recalculateBoundingBox();
middleMeshBuf->setHardwareMappingHint(EHM_STATIC);
middleMesh->addMeshBuffer(middleMeshBuf);
middleMesh->recalculateBoundingBox();
middleMeshBuf->drop(); // we drop the buf, mesh obj has it now
}
}
return SplitMeshResult {leftMesh, middleMesh, rightMesh};
}
IAnimatedMesh* CGeometryCreator::createTerrainMesh(video::IImage* texture,
video::IImage* heightmap, const core::dimension2d<f32>& stretchSize,
f32 maxHeight, video::IVideoDriver* driver,
const core::dimension2d<s32> maxVtxBlockSize,
bool debugBorders)
{
u32 tm = os::Timer::getRealTime()/1000;
if (!texture || !heightmap)
return 0;
video::SMaterial material;
c8 textureName[64];
c8 tmp[255];
// debug border
s32 borderSkip = debugBorders ? 0 : 1;
video::S3DVertex vtx;
vtx.Color.set(255,255,255,255);
SMesh* mesh = new SMesh();
core::dimension2d<s32> hMapSize= heightmap->getDimension();
core::dimension2d<s32> tMapSize= texture->getDimension();
core::position2d<f32> thRel((f32)tMapSize.Width / (s32)hMapSize.Width, (f32)tMapSize.Height / (s32)hMapSize.Height);
core::position2d<s32> processed(0,0);
while (processed.Y<hMapSize.Height)
{
while(processed.X<hMapSize.Width)
{
core::dimension2d<s32> blockSize = maxVtxBlockSize;
if (processed.X + blockSize.Width > hMapSize.Width)
blockSize.Width = hMapSize.Width - processed.X;
if (processed.Y + blockSize.Height > hMapSize.Height)
blockSize.Height = hMapSize.Height - processed.Y;
SMeshBuffer* buffer = new SMeshBuffer();
s32 x,y;
// add vertices of vertex block
for (y=0; y<blockSize.Height; ++y)
for (x=0; x<blockSize.Width; ++x)
{
video::SColor clr = heightmap->getPixel(x+processed.X, y+processed.Y);
f32 height = ((clr.getRed() + clr.getGreen() + clr.getBlue()) / 3.0f)/255.0f * maxHeight;
vtx.Pos.set((f32)(x+processed.X) * stretchSize.Width,
height, (f32)(y+processed.Y) * stretchSize.Height);
vtx.TCoords.set((f32)(x+0.5f) / ((f32)blockSize.Width),
(f32)(y+0.5f) / ((f32)blockSize.Height));
buffer->Vertices.push_back(vtx);
}
// add indices of vertex block
for (y=0; y<blockSize.Height-1; ++y)
for (x=0; x<blockSize.Width-1; ++x)
{
s32 c = (y*blockSize.Width) + x;
buffer->Indices.push_back(c);
buffer->Indices.push_back(c + blockSize.Width);
buffer->Indices.push_back(c + 1);
buffer->Indices.push_back(c + 1);
buffer->Indices.push_back(c + blockSize.Width);
buffer->Indices.push_back(c + 1 + blockSize.Width);
}
// recalculate normals
for (s32 i=0; i<(s32)buffer->Indices.size(); i+=3)
{
core::plane3d<f32> p(
buffer->Vertices[buffer->Indices[i+0]].Pos,
buffer->Vertices[buffer->Indices[i+1]].Pos,
buffer->Vertices[buffer->Indices[i+2]].Pos);
p.Normal.normalize();
buffer->Vertices[buffer->Indices[i+0]].Normal = p.Normal;
buffer->Vertices[buffer->Indices[i+1]].Normal = p.Normal;
buffer->Vertices[buffer->Indices[i+2]].Normal = p.Normal;
}
if (buffer->Vertices.size())
{
// create texture for this block
video::IImage* img = new video::CImage(texture,
core::position2d<s32>((s32)(processed.X*thRel.X), (s32)(processed.Y*thRel.Y)),
core::dimension2d<s32>((s32)(blockSize.Width*thRel.X), (s32)(blockSize.Height*thRel.Y)));
sprintf(textureName, "terrain%d_%d", tm, mesh->getMeshBufferCount());
material.Texture1 = driver->addTexture(textureName, img);
if (material.Texture1)
{
sprintf(tmp, "Generated terrain texture (%dx%d): %s",
material.Texture1->getSize().Width,
material.Texture1->getSize().Height,
textureName);
os::Printer::log(tmp);
}
else
os::Printer::log("Could not create terrain texture.", textureName, ELL_ERROR);
buffer->Material = material;
img->drop();
}
buffer->recalculateBoundingBox();
mesh->addMeshBuffer(buffer);
buffer->drop();
// keep on processing
processed.X += maxVtxBlockSize.Width - borderSkip;
}
// keep on processing
processed.X = 0;
processed.Y += maxVtxBlockSize.Height - borderSkip;
}
SAnimatedMesh* animatedMesh = new SAnimatedMesh();
mesh->recalculateBoundingBox();
animatedMesh->addMesh(mesh);
animatedMesh->recalculateBoundingBox();
mesh->drop();
return animatedMesh;
}
PlayerFrame::PlayerFrame(FrameInfo info, bool load_volumic)
{
// increase total number of loaded frames
PlayerFrame::totalLoadedFrames++;
device->getLogger()->log((stringw("Loading frame number ")+stringw(info.id)+L". Total of frames loaded : "+stringw(PlayerFrame::totalLoadedFrames)).c_str());
core::array<stringc> _lastEleFileNames;
core::array<stringc> _lastFaceFileNames;
core::array<scene::SMeshBuffer*> _lastBuffers;
// initialize some variables
this->id = info.id;
for (u32 o=0; o < info.nodefiles.size(); o++)
{
SMeshBuffer* buffer = new SMeshBuffer();
IMeshSceneNode* node = NULL;
stringc nodeFileName = info.nodefiles[o];
stringc faceFileName = info.facefiles[o];
stringc eleFileName = info.elefiles[o];
// LOADING
ifstream innode;
ifstream inele;
ifstream inface;
int nb_of_points, nb_of_tetrahedra, nb_of_faces;
int p1, p2, p3, p4;
yohan::base::DATA x, y, z;
// used to know if an error occured in the while loop
bool error = false;
// -----------------------------------------------------------------------
// - POINTS --------------------------------------------------------------
// -----------------------------------------------------------------------
innode.open(nodeFileName.c_str(), ios::in | ios::binary); // opens the nodes file
if (!innode || !innode.good())
{
device->getLogger()->log(( stringc("ERROR: This node file could not be opened : ") + nodeFileName ).c_str());
buffer->drop();
continue;
}
// first line data : innode >> nb_of_points >> dim >> nb_of_attr >> boundary_marker;
innode.read(reinterpret_cast < char * > (&nb_of_points), sizeof(int));
// we should have at least one tetrahedra (4 points) and each point should have 3 coordinates
if (nb_of_points > 65535 || nb_of_points < 4)
{
device->getLogger()->log("ERROR: a node file should not contain more than 65535 points and less than 4 points.");
buffer->drop();
continue;
}
device->getLogger()->log((stringw("Loading ")+stringw(nb_of_points)+L" points from "+stringw(nodeFileName.c_str())+L"...").c_str());
// default color
video::SColor clr(255,100,100,200);
// lets add the vertices to the buffer
buffer->Vertices.reallocate( nb_of_points );
// this is one line : innode >> index >> x >> y >> z;
innode.read(reinterpret_cast < char * > (&x), sizeof(yohan::base::DATA));
innode.read(reinterpret_cast < char * > (&y), sizeof(yohan::base::DATA));
innode.read(reinterpret_cast < char * > (&z), sizeof(yohan::base::DATA));
while (!innode.eof() && innode.good())// && (int)buffer->Vertices.size() < nb_of_points)
{
buffer->Vertices.push_back(video::S3DVertex((f32)x, (f32)y, (f32)z, 1,0,0, clr, 0,0));
// this is one line : innode >> index >> x >> y >> z;
innode.read(reinterpret_cast < char * > (&x), sizeof(yohan::base::DATA));
innode.read(reinterpret_cast < char * > (&y), sizeof(yohan::base::DATA));
innode.read(reinterpret_cast < char * > (&z), sizeof(yohan::base::DATA));
}
innode.close();
innode.clear();
// -----------------------------------------------------------------------
// lets check if verticies have been added well
if (buffer->Vertices.size() != nb_of_points)
{
device->getLogger()->log("ERROR: the node file does not seem to be valid.");
buffer->drop();
continue;
}
if (load_volumic)
{
// -----------------------------------------------------------------------
// - TETRAHEDRAS ---------------------------------------------------------
// -----------------------------------------------------------------------
// at first we check if the ele file has not been already opened
s32 eleLoadedIndex = -1;
for (u32 e=0; e < PlayerFrame::lastEleFileNames.size(); e++)
{
if (PlayerFrame::lastEleFileNames[e] == eleFileName)
{
eleLoadedIndex = e;
device->getLogger()->log("The ele file is already in memory. We do not need to reload it.");
break;
}
}
// if is not in memory, load it from file
if (!PlayerFrame::last_was_volumic || eleLoadedIndex == -1 || PlayerFrame::lastBuffers[eleLoadedIndex]->Vertices.size() != buffer->Vertices.size())
{
if (eleLoadedIndex != -1)
device->getLogger()->log((stringc(PlayerFrame::lastBuffers[eleLoadedIndex]->Vertices.size())+
" This is weird: the ele file which is already in memory don't have the same number of vertices than this one.").c_str());
inele.open(eleFileName.c_str(), ios::in | ios::binary); // opens the ele file
if (!inele || !inele.good())
{
device->getLogger()->log(( stringc("ERROR: This ele file could not be opened : ") + eleFileName ).c_str());
buffer->drop();
continue;
}
// first line data : inele >> nb_of_tetrahedra >> dim >> nb_of_attr;
inele.read(reinterpret_cast < char * > (&nb_of_tetrahedra), sizeof(int));
device->getLogger()->log((stringw("Loading ")+stringw(nb_of_tetrahedra)+L" tetrahedras from "+stringw(eleFileName.c_str())+L"...").c_str());
// we should have at least one tetrahedra and each tetrahedra should have 4 points
if (nb_of_tetrahedra < 1)
{
buffer->drop();
continue;
}
// lets add the indices to the buffer
buffer->Indices.set_used( (u32)(3 * 4 * nb_of_tetrahedra) );
u32 i = 0;
// this is one line : inele >> index >> p1 >> p2 >> p3 >> p4;
inele.read(reinterpret_cast < char * > (&p1), sizeof(int));
inele.read(reinterpret_cast < char * > (&p2), sizeof(int));
inele.read(reinterpret_cast < char * > (&p3), sizeof(int));
inele.read(reinterpret_cast < char * > (&p4), sizeof(int));
while (!inele.eof() && inele.good())// && i < 3 * 4 * nb_of_tetrahedra - 12)
{
// check if we are not out of bounds
if (i > (u32)(3 * 4 * nb_of_tetrahedra - 12) || p1 > nb_of_points || p2 > nb_of_points || p3 > nb_of_points || p4 > nb_of_points)
{
device->getLogger()->log("ERROR: the ele file does not seem to be valid. ");
buffer->drop();
error = true;
break;
}
// add 4 polygons per tetrahedra. Not optimized !
s32 ajust_index = 0;
buffer->Indices[(u32)(i+0)] = (u32)(p1 + ajust_index);
buffer->Indices[(u32)(i+1)] = (u32)(p3 + ajust_index);
buffer->Indices[(u32)(i+2)] = (u32)(p2 + ajust_index);
core::triangle3df t4(
buffer->Vertices[(u32)(p1 + ajust_index)].Pos,
buffer->Vertices[(u32)(p3 + ajust_index)].Pos,
buffer->Vertices[(u32)(p2 + ajust_index)].Pos);
i += 3;
buffer->Indices[(u32)(i+0)] = (u32)(p1 + ajust_index);
buffer->Indices[(u32)(i+1)] = (u32)(p2 + ajust_index);
buffer->Indices[(u32)(i+2)] = (u32)(p4 + ajust_index);
core::triangle3df t3(
buffer->Vertices[(u32)(p1 + ajust_index)].Pos,
buffer->Vertices[(u32)(p2 + ajust_index)].Pos,
buffer->Vertices[(u32)(p4 + ajust_index)].Pos);
i += 3;
buffer->Indices[(u32)(i+0)] = (u32)(p3 + ajust_index);
buffer->Indices[(u32)(i+1)] = (u32)(p4 + ajust_index);
buffer->Indices[(u32)(i+2)] = (u32)(p2 + ajust_index);
core::triangle3df t1(
buffer->Vertices[(u32)(p3 + ajust_index)].Pos,
buffer->Vertices[(u32)(p4 + ajust_index)].Pos,
buffer->Vertices[(u32)(p2 + ajust_index)].Pos);
i += 3;
buffer->Indices[(u32)(i+0)] = (u32)(p1 + ajust_index);
buffer->Indices[(u32)(i+1)] = (u32)(p4 + ajust_index);
buffer->Indices[(u32)(i+2)] = (u32)(p3 + ajust_index);
core::triangle3df t2(
buffer->Vertices[(u32)(p1 + ajust_index)].Pos,
buffer->Vertices[(u32)(p4 + ajust_index)].Pos,
buffer->Vertices[(u32)(p3 + ajust_index)].Pos);
i += 3;
buffer->Vertices[(u32)(p1 + ajust_index)].Normal = t1.getNormal();
buffer->Vertices[(u32)(p2 + ajust_index)].Normal = t2.getNormal();
buffer->Vertices[(u32)(p3 + ajust_index)].Normal = t3.getNormal();
buffer->Vertices[(u32)(p4 + ajust_index)].Normal = t4.getNormal();
// this is one line : inele >> index >> p1 >> p2 >> p3 >> p4;
inele.read(reinterpret_cast < char * > (&p1), sizeof(int));
inele.read(reinterpret_cast < char * > (&p2), sizeof(int));
inele.read(reinterpret_cast < char * > (&p3), sizeof(int));
inele.read(reinterpret_cast < char * > (&p4), sizeof(int));
}
inele.close();
inele.clear();
}
else // we do not need to reload from the file !
{
buffer->Indices.reallocate(PlayerFrame::lastBuffers[eleLoadedIndex]->Indices.size());
buffer->Indices = PlayerFrame::lastBuffers[eleLoadedIndex]->Indices;
for (u32 j=0; j < buffer->Vertices.size(); j++)
buffer->Vertices[j].Normal = PlayerFrame::lastBuffers[eleLoadedIndex]->Vertices[j].Normal;
}
// -----------------------------------------------------------------------
}
else // load_volumic == false
{
// -----------------------------------------------------------------------
// - FACES ---------------------------------------------------------------
// -----------------------------------------------------------------------
// at first we check if the ele file has not been already opened
s32 faceLoadedIndex = -1;
for (u32 e=0; e < PlayerFrame::lastFaceFileNames.size(); e++)
{
if (PlayerFrame::lastFaceFileNames[e] == faceFileName)
{
faceLoadedIndex = e;
device->getLogger()->log("The face file is already in memory. We do not need to reload it.");
break;
}
}
// if is not in memory, load it from file
if (PlayerFrame::last_was_volumic || faceLoadedIndex == -1 || PlayerFrame::lastBuffers[faceLoadedIndex]->Vertices.size() != buffer->Vertices.size())
{
inface.open(faceFileName.c_str(), ios::in | ios::binary); // opens the face file
if (!inface || !inface.good())
{
device->getLogger()->log(( stringc("ERROR: This face file could not be opened : ") + faceFileName ).c_str());
buffer->drop();
continue;
}
// first line data : inface >> nb_of_tetrahedra >> dim >> nb_of_attr;
inface.read(reinterpret_cast < char * > (&nb_of_faces), sizeof(int));
device->getLogger()->log((stringw("Loading ")+stringw(nb_of_faces)+L" faces from "+stringw(faceFileName.c_str())+L"...").c_str());
// we should have at least one face
if (nb_of_faces < 1)
{
buffer->drop();
continue;
}
// lets add the indices to the buffer
buffer->Indices.set_used( (u32)(3 * nb_of_faces) );
u32 i = 0;
// this is one line : inface >> index >> p1 >> p2 >> p3;
inface.read(reinterpret_cast < char * > (&p1), sizeof(int));
inface.read(reinterpret_cast < char * > (&p2), sizeof(int));
inface.read(reinterpret_cast < char * > (&p3), sizeof(int));
while (!inface.eof() && inface.good())
{
// check if we are not out of bounds
if (i > (u32)(3 * nb_of_faces - 3) || p1 > nb_of_points || p2 > nb_of_points || p3 > nb_of_points)
{
device->getLogger()->log("ERROR: the face file does not seem to be valid. ");
buffer->drop();
error = true;
break;
}
// add 1 polygon per face.
s32 ajust_index = -1;
buffer->Indices[(u32)(i+0)] = (u32)(p1 + ajust_index);
buffer->Indices[(u32)(i+1)] = (u32)(p3 + ajust_index);
buffer->Indices[(u32)(i+2)] = (u32)(p2 + ajust_index);
core::triangle3df t(
buffer->Vertices[(u32)(p1 + ajust_index)].Pos,
buffer->Vertices[(u32)(p3 + ajust_index)].Pos,
buffer->Vertices[(u32)(p2 + ajust_index)].Pos);
i += 3;
buffer->Vertices[(u32)(p1 + ajust_index)].Normal = t.getNormal();
buffer->Vertices[(u32)(p2 + ajust_index)].Normal = t.getNormal();
buffer->Vertices[(u32)(p3 + ajust_index)].Normal = t.getNormal();
// this is one line : inface >> index >> p1 >> p2 >> p3;
inface.read(reinterpret_cast < char * > (&p1), sizeof(int));
inface.read(reinterpret_cast < char * > (&p2), sizeof(int));
inface.read(reinterpret_cast < char * > (&p3), sizeof(int));
}
inface.close();
inface.clear();
}
else // we do not need to reload from the file !
{
buffer->Indices.reallocate(PlayerFrame::lastBuffers[faceLoadedIndex]->Indices.size());
buffer->Indices = PlayerFrame::lastBuffers[faceLoadedIndex]->Indices;
for (u32 j=0; j < buffer->Vertices.size(); j++)
buffer->Vertices[j].Normal = PlayerFrame::lastBuffers[faceLoadedIndex]->Vertices[j].Normal;
}
// -----------------------------------------------------------------------
}
if (error)
continue;
// lets recalculate the bounding box and create the mesh
for (u32 j=0; j < buffer->Vertices.size(); ++j)
buffer->BoundingBox.addInternalPoint(buffer->Vertices[j].Pos);
SMesh* mesh = new SMesh;
mesh->addMeshBuffer(buffer);
mesh->recalculateBoundingBox();
// here we go, lets create the node that will owns the mesh data
node = smgr->addMeshSceneNode( mesh );
mesh->drop();
if (!node)
{
node = NULL;
continue;
}
node->setVisible(false);
//node->setMaterialFlag(video::EMF_WIREFRAME, true);
this->nodes.push_back( node );
// updating last
_lastEleFileNames.push_back( eleFileName );
_lastFaceFileNames.push_back( faceFileName );
_lastBuffers.push_back( buffer );
}
// clean history and update it
PlayerFrame::lastEleFileNames = _lastEleFileNames;
PlayerFrame::lastFaceFileNames = _lastFaceFileNames;
for (u32 e=0; e < lastBuffers.size(); e++)
{
if (_lastBuffers.binary_search(PlayerFrame::lastBuffers[e]) == -1)
{
PlayerFrame::lastBuffers[e]->drop();
}
}
PlayerFrame::lastBuffers = _lastBuffers;
PlayerFrame::last_was_volumic = load_volumic;
// that's it !
device->getLogger()->log("Loaded.");
}
IAnimatedMesh* CMY3DMeshFileLoader::createMesh(io::IReadFile* file)
{
MaterialEntry.clear();
MeshBufferEntry.clear();
ChildNodes.clear();
// working directory (from which we load the scene)
core::stringc filepath = FileSystem->getFileDir(file->getFileName());
if (filepath==".")
filepath="";
else
filepath.append("/");
// read file into memory
SMyFileHeader fileHeader;
file->read(&fileHeader, sizeof(SMyFileHeader));
#ifdef __BIG_ENDIAN__
fileHeader.MyId = os::Byteswap::byteswap(fileHeader.MyId);
fileHeader.Ver = os::Byteswap::byteswap(fileHeader.Ver);
#endif
if (fileHeader.MyId!=MY3D_ID || fileHeader.Ver!=MY3D_VER)
{
os::Printer::log("Bad MY3D file header, loading failed!", ELL_ERROR);
return 0;
}
u16 id;
file->read(&id, sizeof(id));
#ifdef __BIG_ENDIAN__
id = os::Byteswap::byteswap(id);
#endif
if (id!=MY3D_SCENE_HEADER_ID)
{
os::Printer::log("Cannot find MY3D_SCENE_HEADER_ID, loading failed!", ELL_ERROR);
return 0;
}
SMySceneHeader sceneHeader;
file->read(&sceneHeader, sizeof(SMySceneHeader));
#ifdef __BIG_ENDIAN__
sceneHeader.MaterialCount = os::Byteswap::byteswap(sceneHeader.MaterialCount);
sceneHeader.MeshCount = os::Byteswap::byteswap(sceneHeader.MeshCount);
#endif
file->read(&id, sizeof(id));
#ifdef __BIG_ENDIAN__
id = os::Byteswap::byteswap(id);
#endif
if (id!=MY3D_MAT_LIST_ID)
{
os::Printer::log("Can not find MY3D_MAT_LIST_ID, loading failed!", ELL_ERROR);
return 0;
}
core::stringc texturePath =
SceneManager->getParameters()->getAttributeAsString(MY3D_TEXTURE_PATH);
file->read(&id, sizeof(id));
#ifdef __BIG_ENDIAN__
id = os::Byteswap::byteswap(id);
#endif
c8 namebuf[256];
for (s32 m=0; m<sceneHeader.MaterialCount; ++m)
{
if (id != MY3D_MAT_HEADER_ID)
{
os::Printer::log("Cannot find MY3D_MAT_HEADER_ID, loading failed!", ELL_ERROR);
return 0;
}
// read material header
MaterialEntry.push_back(SMyMaterialEntry());
SMyMaterialEntry& me=MaterialEntry.getLast();
file->read(&(me.Header), sizeof(SMyMaterialHeader));
// read next identificator
file->read(&id, sizeof(id));
#ifdef __BIG_ENDIAN__
id = os::Byteswap::byteswap(id);
#endif
bool gotLightMap=false, gotMainMap=false;
for (u32 t=0; t<me.Header.TextureCount; ++t)
{
if (id==MY3D_TEX_FNAME_ID)
file->read(namebuf, 256);
else
{
me.Texture2 = readEmbeddedLightmap(file, namebuf);
if (!me.Texture2)
return 0;
gotLightMap = true;
}
const core::stringc name(namebuf);
const s32 pos = name.findLast('.');
const core::stringc LightingMapStr = "LightingMap";
const s32 ls = LightingMapStr.size();
const bool isSubString = (LightingMapStr == name.subString(core::max_(0, (pos - ls)), ls));
if ((isSubString || (name[pos-1]=='m' &&
name[pos-2]=='l' && name[pos-3]=='_')) &&
!gotLightMap)
{
const bool oldMipMapState = SceneManager->getVideoDriver()->getTextureCreationFlag(video::ETCF_CREATE_MIP_MAPS);
SceneManager->getVideoDriver()->setTextureCreationFlag(video::ETCF_CREATE_MIP_MAPS, false);
me.Texture2FileName = texturePath.size() ? texturePath : filepath;
me.Texture2FileName.append("Lightmaps/");
me.Texture2FileName.append(name);
if (name.size())
me.Texture2 = SceneManager->getVideoDriver()->getTexture(me.Texture2FileName);
me.MaterialType = video::EMT_LIGHTMAP_M2;
gotLightMap = true;
SceneManager->getVideoDriver()->setTextureCreationFlag(video::ETCF_CREATE_MIP_MAPS, oldMipMapState);
}
else
if (!gotLightMap && gotMainMap)
{
me.Texture2FileName = texturePath.size() ? texturePath : filepath;
me.Texture2FileName.append(name);
if (name.size())
me.Texture2 = SceneManager->getVideoDriver()->getTexture(me.Texture2FileName);
me.MaterialType = video::EMT_REFLECTION_2_LAYER;
}
else
if (!gotMainMap && !gotLightMap)
{
me.Texture1FileName = filepath;
me.Texture1FileName.append(name);
if (name.size())
me.Texture1 = SceneManager->getVideoDriver()->getTexture(me.Texture1FileName);
gotMainMap = true;
me.MaterialType = video::EMT_SOLID;
}
else
if (gotLightMap)
{
me.MaterialType = video::EMT_LIGHTMAP_M2;
}
file->read(&id, sizeof(id));
#ifdef __BIG_ENDIAN__
id = os::Byteswap::byteswap(id);
#endif
}
// override material types based on their names
if (!strncmp(me.Header.Name, "AlphaChannel-", 13))
me.MaterialType = video::EMT_TRANSPARENT_ALPHA_CHANNEL;
else
if (!strncmp(me.Header.Name, "SphereMap-", 10))
me.MaterialType = video::EMT_SPHERE_MAP;
}
// loading meshes
if (id!=MY3D_MESH_LIST_ID)
{
os::Printer::log("Can not find MY3D_MESH_LIST_ID, loading failed!", ELL_ERROR);
return 0;
}
file->read(&id, sizeof(id));
#ifdef __BIG_ENDIAN__
id = os::Byteswap::byteswap(id);
#endif
for (s32 mesh_id=0; mesh_id<sceneHeader.MeshCount; mesh_id++)
{
// Warning!!! In some cases MY3D exporter uncorrectly calculates
// MeshCount (it's a problem, has to be solved) thats why
// i added this code line
if (id!=MY3D_MESH_HEADER_ID)
break;
if (id!=MY3D_MESH_HEADER_ID)
{
os::Printer::log("Can not find MY3D_MESH_HEADER_ID, loading failed!", ELL_ERROR);
return 0;
}
SMyMeshHeader meshHeader;
file->read(&meshHeader, sizeof(SMyMeshHeader));
core::array <SMyVertex> Vertex;
core::array <SMyFace> Face;
core::array <SMyTVertex> TVertex1, TVertex2;
core::array <SMyFace> TFace1, TFace2;
s32 vertsNum=0;
s32 facesNum=0;
// vertices
file->read(&id, sizeof(id));
#ifdef __BIG_ENDIAN__
id = os::Byteswap::byteswap(id);
#endif
if (id!=MY3D_VERTS_ID)
{
os::Printer::log("Can not find MY3D_VERTS_ID, loading failed!", ELL_ERROR);
return 0;
}
file->read(&vertsNum, sizeof(vertsNum));
Vertex.set_used(vertsNum);
file->read(Vertex.pointer(), sizeof(SMyVertex)*vertsNum);
// faces
file->read(&id, sizeof(id));
#ifdef __BIG_ENDIAN__
id = os::Byteswap::byteswap(id);
#endif
if (id!=MY3D_FACES_ID)
{
os::Printer::log("Can not find MY3D_FACES_ID, loading failed!", ELL_ERROR);
return 0;
}
file->read(&facesNum, sizeof(facesNum));
Face.set_used(facesNum);
file->read(Face.pointer(), sizeof(SMyFace)*facesNum);
// reading texture channels
for (s32 tex=0; tex<(s32)meshHeader.TChannelCnt; tex++)
{
// Max 2 texture channels allowed (but in format .my3d can be more)
s32 tVertsNum=0, tFacesNum=0;
// reading texture coords
file->read(&id, sizeof(id));
#ifdef __BIG_ENDIAN__
id = os::Byteswap::byteswap(id);
#endif
if (id!=MY3D_TVERTS_ID)
{
core::stringc msg="Can not find MY3D_TVERTS_ID (";
msg.append(core::stringc(tex));
msg.append("texture channel), loading failed!");
os::Printer::log(msg.c_str(), ELL_ERROR);
return 0;
}
file->read(&tVertsNum, sizeof(tVertsNum));
if (tex==0)
{
// 1st texture channel
TVertex1.set_used(tVertsNum);
file->read(TVertex1.pointer(), sizeof(SMyTVertex)*tVertsNum);
}
else
if (tex==1)
{
// 2nd texture channel
TVertex2.set_used(tVertsNum);
file->read(TVertex2.pointer(), sizeof(SMyTVertex)*tVertsNum);
}
else
{
// skip other texture channels
file->seek(file->getPos()+sizeof(SMyTVertex)*tVertsNum);
}
// reading texture faces
file->read(&id, sizeof(id));
#ifdef __BIG_ENDIAN__
id = os::Byteswap::byteswap(id);
#endif
if (id!=MY3D_TFACES_ID)
{
core::stringc msg="Can not find MY3D_TFACES_ID (";
msg.append(core::stringc(tex));
msg.append("texture channel), loading failed!");
os::Printer::log(msg.c_str(), ELL_ERROR);
return 0;
}
file->read(&tFacesNum, sizeof(tFacesNum));
if (tex==0)
{
// 1st texture channel
TFace1.set_used(tFacesNum);
file->read(TFace1.pointer(), sizeof(SMyFace)*tFacesNum);
}
else if (tex==1)
{
// 2nd texture channel
TFace2.set_used(tFacesNum);
file->read(TFace2.pointer(), sizeof(SMyFace)*tFacesNum);
}
else
{
// skip other texture channels
file->seek(file->getPos()+sizeof(SMyFace)*tFacesNum);
}
}
// trying to find material
SMyMaterialEntry* matEnt = getMaterialEntryByIndex(meshHeader.MatIndex);
// creating geometry for the mesh
// trying to find mesh buffer for this material
CMeshBuffer<video::S3DVertex2TCoords>* buffer = getMeshBufferByMaterialIndex(meshHeader.MatIndex);
if (!buffer ||
(buffer->getVertexBuffer()->getVertexCount()+vertsNum) > SceneManager->getVideoDriver()->getMaximalPrimitiveCount())
{
// creating new mesh buffer for this material
buffer = new CMeshBuffer<video::S3DVertex2TCoords>(SceneManager->getVideoDriver()->getVertexDescriptor(1));
buffer->Material.MaterialType = video::EMT_LIGHTMAP_M2; // EMT_LIGHTMAP_M4 also possible
buffer->Material.Wireframe = false;
buffer->Material.Lighting = false;
if (matEnt)
{
buffer->Material.MaterialType = matEnt->MaterialType;
if (buffer->Material.MaterialType == video::EMT_REFLECTION_2_LAYER)
{
buffer->Material.Lighting = true;
buffer->Material.setTexture(1, matEnt->Texture1);
buffer->Material.setTexture(0, matEnt->Texture2);
}
else
{
buffer->Material.setTexture(0, matEnt->Texture1);
buffer->Material.setTexture(1, matEnt->Texture2);
}
if (buffer->Material.MaterialType == video::EMT_TRANSPARENT_ALPHA_CHANNEL)
{
buffer->Material.BackfaceCulling = true;
buffer->Material.Lighting = true;
}
else
if (buffer->Material.MaterialType == video::EMT_SPHERE_MAP)
{
buffer->Material.Lighting = true;
}
buffer->Material.AmbientColor = video::SColor(
matEnt->Header.AmbientColor.A, matEnt->Header.AmbientColor.R,
matEnt->Header.AmbientColor.G, matEnt->Header.AmbientColor.B
);
buffer->Material.DiffuseColor = video::SColor(
matEnt->Header.DiffuseColor.A, matEnt->Header.DiffuseColor.R,
matEnt->Header.DiffuseColor.G, matEnt->Header.DiffuseColor.B
);
buffer->Material.EmissiveColor = video::SColor(
matEnt->Header.EmissiveColor.A, matEnt->Header.EmissiveColor.R,
matEnt->Header.EmissiveColor.G, matEnt->Header.EmissiveColor.B
);
buffer->Material.SpecularColor = video::SColor(
matEnt->Header.SpecularColor.A, matEnt->Header.SpecularColor.R,
matEnt->Header.SpecularColor.G, matEnt->Header.SpecularColor.B
);
}
else
{
buffer->Material.setTexture(0, 0);
buffer->Material.setTexture(1, 0);
buffer->Material.AmbientColor = video::SColor(255, 255, 255, 255);
buffer->Material.DiffuseColor = video::SColor(255, 255, 255, 255);
buffer->Material.EmissiveColor = video::SColor(0, 0, 0, 0);
buffer->Material.SpecularColor = video::SColor(0, 0, 0, 0);
}
if (matEnt && matEnt->Header.Transparency!=0)
{
if (buffer->Material.MaterialType == video::EMT_REFLECTION_2_LAYER )
{
buffer->Material.MaterialType = video::EMT_TRANSPARENT_REFLECTION_2_LAYER;
buffer->Material.Lighting = true;
buffer->Material.BackfaceCulling = true;
}
else
{
buffer->Material.MaterialType = video::EMT_TRANSPARENT_VERTEX_ALPHA;
buffer->Material.Lighting = false;
buffer->Material.BackfaceCulling = false;
}
}
else if (
!buffer->Material.getTexture(1) &&
buffer->Material.MaterialType != video::EMT_TRANSPARENT_ALPHA_CHANNEL &&
buffer->Material.MaterialType != video::EMT_SPHERE_MAP)
{
buffer->Material.MaterialType = video::EMT_SOLID;
buffer->Material.Lighting = true;
}
MeshBufferEntry.push_back(
SMyMeshBufferEntry(meshHeader.MatIndex, buffer));
}
video::S3DVertex2TCoords VertexA, VertexB, VertexC;
// vertices (A, B, C) color
video::SColor vert_color;
if (matEnt &&
(buffer->Material.MaterialType == video::EMT_TRANSPARENT_VERTEX_ALPHA ||
buffer->Material.MaterialType == video::EMT_TRANSPARENT_REFLECTION_2_LAYER))
{
video::SColor color(
matEnt->Header.DiffuseColor.A, matEnt->Header.DiffuseColor.R,
matEnt->Header.DiffuseColor.G, matEnt->Header.DiffuseColor.B);
vert_color = color.getInterpolated(video::SColor(0,0,0,0),
1-matEnt->Header.Transparency);
}
else
{
vert_color = buffer->Material.DiffuseColor;
}
VertexA.Color = VertexB.Color = VertexC.Color = vert_color;
if (buffer->Material.MaterialType == video::EMT_TRANSPARENT_ALPHA_CHANNEL)
{
buffer->getIndexBuffer()->reallocate(buffer->getIndexBuffer()->getIndexCount()+6*facesNum);
buffer->getVertexBuffer()->reallocate(buffer->getVertexBuffer()->getVertexCount()+6*facesNum);
}
else
{
buffer->getIndexBuffer()->reallocate(buffer->getIndexBuffer()->getIndexCount()+3*facesNum);
buffer->getVertexBuffer()->reallocate(buffer->getVertexBuffer()->getVertexCount()+3*facesNum);
}
for (int f=0; f<facesNum; f++)
{
// vertex A
VertexA.Pos.X = Vertex[Face[f].C].Coord.X;
VertexA.Pos.Y = Vertex[Face[f].C].Coord.Y;
VertexA.Pos.Z = Vertex[Face[f].C].Coord.Z;
VertexA.Normal.X = Vertex[Face[f].C].Normal.X;
VertexA.Normal.Y = Vertex[Face[f].C].Normal.Y;
VertexA.Normal.Z = Vertex[Face[f].C].Normal.Z;
if (meshHeader.TChannelCnt>0)
{
VertexA.TCoords.X = TVertex1[TFace1[f].C].TCoord.X;
VertexA.TCoords.Y = TVertex1[TFace1[f].C].TCoord.Y;
}
if (meshHeader.TChannelCnt>1)
{
VertexA.TCoords2.X = TVertex2[TFace2[f].C].TCoord.X;
VertexA.TCoords2.Y = TVertex2[TFace2[f].C].TCoord.Y;
}
// vertex B
VertexB.Pos.X = Vertex[Face[f].B].Coord.X;
VertexB.Pos.Y = Vertex[Face[f].B].Coord.Y;
VertexB.Pos.Z = Vertex[Face[f].B].Coord.Z;
VertexB.Normal.X = Vertex[Face[f].B].Normal.X;
VertexB.Normal.Y = Vertex[Face[f].B].Normal.Y;
VertexB.Normal.Z = Vertex[Face[f].B].Normal.Z;
if (meshHeader.TChannelCnt>0)
{
VertexB.TCoords.X = TVertex1[TFace1[f].B].TCoord.X;
VertexB.TCoords.Y = TVertex1[TFace1[f].B].TCoord.Y;
}
if (meshHeader.TChannelCnt>1)
{
VertexB.TCoords2.X = TVertex2[TFace2[f].B].TCoord.X;
VertexB.TCoords2.Y = TVertex2[TFace2[f].B].TCoord.Y;
}
// vertex C
VertexC.Pos.X = Vertex[Face[f].A].Coord.X;
VertexC.Pos.Y = Vertex[Face[f].A].Coord.Y;
VertexC.Pos.Z = Vertex[Face[f].A].Coord.Z;
VertexC.Normal.X = Vertex[Face[f].A].Normal.X;
VertexC.Normal.Y = Vertex[Face[f].A].Normal.Y;
VertexC.Normal.Z = Vertex[Face[f].A].Normal.Z;
if (meshHeader.TChannelCnt>0)
{
VertexC.TCoords.X = TVertex1[TFace1[f].A].TCoord.X;
VertexC.TCoords.Y = TVertex1[TFace1[f].A].TCoord.Y;
}
if (meshHeader.TChannelCnt>1)
{
VertexC.TCoords2.X = TVertex2[TFace2[f].A].TCoord.X;
VertexC.TCoords2.Y = TVertex2[TFace2[f].A].TCoord.Y;
}
// store 3d data in mesh buffer
buffer->getIndexBuffer()->addIndex(buffer->getVertexBuffer()->getVertexCount());
buffer->getVertexBuffer()->addVertex(&VertexA);
buffer->getIndexBuffer()->addIndex(buffer->getVertexBuffer()->getVertexCount());
buffer->getVertexBuffer()->addVertex(&VertexB);
buffer->getIndexBuffer()->addIndex(buffer->getVertexBuffer()->getVertexCount());
buffer->getVertexBuffer()->addVertex(&VertexC);
//*****************************************************************
// !!!!!! W A R N I N G !!!!!!!
//*****************************************************************
// For materials with alpha channel we duplicate all faces.
// This has be done for proper lighting calculation of the back faces.
// So you must remember this while you creating your models !!!!!
//*****************************************************************
// !!!!!! W A R N I N G !!!!!!!
//*****************************************************************
if (buffer->Material.MaterialType == video::EMT_TRANSPARENT_ALPHA_CHANNEL)
{
VertexA.Normal = core::vector3df(-VertexA.Normal.X, -VertexA.Normal.Y, -VertexA.Normal.Z);
VertexB.Normal = core::vector3df(-VertexB.Normal.X, -VertexB.Normal.Y, -VertexB.Normal.Z);
VertexC.Normal = core::vector3df(-VertexC.Normal.X, -VertexC.Normal.Y, -VertexC.Normal.Z);
buffer->getIndexBuffer()->addIndex(buffer->getVertexBuffer()->getVertexCount());
buffer->getVertexBuffer()->addVertex(&VertexC);
buffer->getIndexBuffer()->addIndex(buffer->getVertexBuffer()->getVertexCount());
buffer->getVertexBuffer()->addVertex(&VertexB);
buffer->getIndexBuffer()->addIndex(buffer->getVertexBuffer()->getVertexCount());
buffer->getVertexBuffer()->addVertex(&VertexA);
}
}
file->read(&id, sizeof(id));
#ifdef __BIG_ENDIAN__
id = os::Byteswap::byteswap(id);
#endif
}
// creating mesh
SMesh* mesh = new SMesh();
for (u32 num=0; num<MeshBufferEntry.size(); ++num)
{
CMeshBuffer<video::S3DVertex2TCoords>* buffer = MeshBufferEntry[num].MeshBuffer;
if (!buffer)
continue;
mesh->addMeshBuffer(buffer);
buffer->recalculateBoundingBox();
buffer->drop();
}
mesh->recalculateBoundingBox();
if (id != MY3D_FILE_END_ID)
os::Printer::log("Loading finished, but can not find MY3D_FILE_END_ID token.", ELL_WARNING);
SAnimatedMesh* am = new SAnimatedMesh();
am->addMesh(mesh);
mesh->drop();
am->recalculateBoundingBox();
return am;
}
/**Creates/loads an animated mesh from the file.
\return Pointer to the created mesh. Returns 0 if loading failed.
If you no longer need the mesh, you should call IAnimatedMesh::drop().
See IReferenceCounted::drop() for more information.*/
IAnimatedMesh* CDMFLoader::createMesh(io::IReadFile* file)
{
if (!file)
return 0;
video::IVideoDriver* driver = SceneMgr->getVideoDriver();
//Load stringlist
StringList dmfRawFile;
LoadFromFile(file, dmfRawFile);
if (dmfRawFile.size()==0)
return 0;
SMesh * mesh = new SMesh();
u32 i;
dmfHeader header;
//load header
core::array<dmfMaterial> materiali;
if (GetDMFHeader(dmfRawFile, header))
{
//let's set ambient light
SceneMgr->setAmbientLight(header.dmfAmbient);
//let's create the correct number of materials, vertices and faces
dmfVert *verts=new dmfVert[header.numVertices];
dmfFace *faces=new dmfFace[header.numFaces];
//let's get the materials
#ifdef _IRR_DMF_DEBUG_
os::Printer::log("Loading materials", core::stringc(header.numMaterials).c_str());
#endif
GetDMFMaterials(dmfRawFile, materiali, header.numMaterials);
//let's get vertices and faces
#ifdef _IRR_DMF_DEBUG_
os::Printer::log("Loading geometry");
#endif
GetDMFVerticesFaces(dmfRawFile, verts, faces);
//create a meshbuffer for each material, then we'll remove empty ones
#ifdef _IRR_DMF_DEBUG_
os::Printer::log("Creating meshbuffers.");
#endif
for (i=0; i<header.numMaterials; i++)
{
//create a new SMeshBufferLightMap for each material
SSkinMeshBuffer* buffer = new SSkinMeshBuffer();
buffer->Material.MaterialType = video::EMT_LIGHTMAP_LIGHTING;
buffer->Material.Wireframe = false;
buffer->Material.Lighting = true;
mesh->addMeshBuffer(buffer);
buffer->drop();
}
// Build the mesh buffers
#ifdef _IRR_DMF_DEBUG_
os::Printer::log("Adding geometry to mesh.");
#endif
for (i = 0; i < header.numFaces; i++)
{
#ifdef _IRR_DMF_DEBUG_
os::Printer::log("Polygon with #vertices", core::stringc(faces[i].numVerts).c_str());
#endif
if (faces[i].numVerts < 3)
continue;
const core::vector3df normal =
core::triangle3df(verts[faces[i].firstVert].pos,
verts[faces[i].firstVert+1].pos,
verts[faces[i].firstVert+2].pos).getNormal().normalize();
SSkinMeshBuffer* meshBuffer = (SSkinMeshBuffer*)mesh->getMeshBuffer(
faces[i].materialID);
const bool use2TCoords = meshBuffer->Vertices_2TCoords.size() ||
materiali[faces[i].materialID].lightmapName.size();
if (use2TCoords && meshBuffer->Vertices_Standard.size())
meshBuffer->convertTo2TCoords();
const u32 base = meshBuffer->Vertices_2TCoords.size()?meshBuffer->Vertices_2TCoords.size():meshBuffer->Vertices_Standard.size();
// Add this face's verts
if (use2TCoords)
{
// make sure we have the proper type set
meshBuffer->VertexType=video::EVT_2TCOORDS;
for (u32 v = 0; v < faces[i].numVerts; v++)
{
const dmfVert& vv = verts[faces[i].firstVert + v];
video::S3DVertex2TCoords vert(vv.pos,
normal, video::SColor(255,255,255,255), vv.tc, vv.lc);
if (materiali[faces[i].materialID].textureBlend==4 &&
SceneMgr->getParameters()->getAttributeAsBool(DMF_FLIP_ALPHA_TEXTURES))
{
vert.TCoords.set(vv.tc.X,-vv.tc.Y);
}
meshBuffer->Vertices_2TCoords.push_back(vert);
}
}
else
{
for (u32 v = 0; v < faces[i].numVerts; v++)
{
const dmfVert& vv = verts[faces[i].firstVert + v];
video::S3DVertex vert(vv.pos,
normal, video::SColor(255,255,255,255), vv.tc);
if (materiali[faces[i].materialID].textureBlend==4 &&
SceneMgr->getParameters()->getAttributeAsBool(DMF_FLIP_ALPHA_TEXTURES))
{
vert.TCoords.set(vv.tc.X,-vv.tc.Y);
}
meshBuffer->Vertices_Standard.push_back(vert);
}
}
// Now add the indices
// This weird loop turns convex polygons into triangle strips.
// I do it this way instead of a simple fan because it usually
// looks a lot better in wireframe, for example.
u32 h = faces[i].numVerts - 1, l = 0, c; // High, Low, Center
for (u32 v = 0; v < faces[i].numVerts - 2; v++)
{
if (v & 1) // odd
c = h - 1;
else // even
c = l + 1;
meshBuffer->Indices.push_back(base + h);
meshBuffer->Indices.push_back(base + l);
meshBuffer->Indices.push_back(base + c);
if (v & 1) // odd
h--;
else // even
l++;
}
}
delete [] verts;
delete [] faces;
}
// delete all buffers without geometry in it.
#ifdef _IRR_DMF_DEBUG_
os::Printer::log("Cleaning meshbuffers.");
#endif
i = 0;
while(i < mesh->MeshBuffers.size())
{
if (mesh->MeshBuffers[i]->getVertexCount() == 0 ||
mesh->MeshBuffers[i]->getIndexCount() == 0)
{
// Meshbuffer is empty -- drop it
mesh->MeshBuffers[i]->drop();
mesh->MeshBuffers.erase(i);
materiali.erase(i);
}
else
{
i++;
}
}
{
//load textures and lightmaps in materials.
//don't worry if you receive a could not load texture, cause if you don't need
//a particular material in your scene it will be loaded and then destroyed.
#ifdef _IRR_DMF_DEBUG_
os::Printer::log("Loading textures.");
#endif
const bool use_mat_dirs=!SceneMgr->getParameters()->getAttributeAsBool(DMF_IGNORE_MATERIALS_DIRS);
core::stringc path;
if ( SceneMgr->getParameters()->existsAttribute(DMF_TEXTURE_PATH) )
path = SceneMgr->getParameters()->getAttributeAsString(DMF_TEXTURE_PATH);
else
path = FileSystem->getFileDir(file->getFileName());
path += ('/');
for (i=0; i<mesh->getMeshBufferCount(); i++)
{
//texture and lightmap
video::ITexture *tex = 0;
video::ITexture *lig = 0;
//current buffer to apply material
video::SMaterial& mat = mesh->getMeshBuffer(i)->getMaterial();
//Primary texture is normal
if (materiali[i].textureFlag==0)
{
if (materiali[i].textureBlend==4)
driver->setTextureCreationFlag(video::ETCF_ALWAYS_32_BIT,true);
findFile(use_mat_dirs, path, materiali[i].pathName, materiali[i].textureName);
tex = driver->getTexture(materiali[i].textureName);
}
//Primary texture is just a colour
else if(materiali[i].textureFlag==1)
{
video::SColor color(axtoi(materiali[i].textureName.c_str()));
//just for compatibility with older Irrlicht versions
//to support transparent materials
if (color.getAlpha()!=255 && materiali[i].textureBlend==4)
driver->setTextureCreationFlag(video::ETCF_ALWAYS_32_BIT,true);
video::IImage *immagine= driver->createImage(video::ECF_A8R8G8B8,
core::dimension2d<u32>(8,8));
immagine->fill(color);
tex = driver->addTexture("", immagine);
immagine->drop();
//to support transparent materials
if (color.getAlpha()!=255 && materiali[i].textureBlend==4)
{
mat.MaterialType = video::EMT_TRANSPARENT_ALPHA_CHANNEL;
mat.MaterialTypeParam =(((f32) (color.getAlpha()-1))/255.0f);
}
}
//Lightmap is present
if (materiali[i].lightmapFlag == 0)
{
findFile(use_mat_dirs, path, materiali[i].pathName, materiali[i].lightmapName);
lig = driver->getTexture(materiali[i].lightmapName);
}
else //no lightmap
{
mat.MaterialType = video::EMT_SOLID;
const f32 mult = 100.0f - header.dmfShadow;
mat.AmbientColor=header.dmfAmbient.getInterpolated(video::SColor(255,0,0,0),mult/100.f);
}
if (materiali[i].textureBlend==4)
{
mat.MaterialType = video::EMT_TRANSPARENT_ALPHA_CHANNEL;
mat.MaterialTypeParam =
SceneMgr->getParameters()->getAttributeAsFloat(DMF_ALPHA_CHANNEL_REF);
}
//if texture is present mirror vertically owing to DeleD representation
if (tex && header.dmfVersion<1.1)
{
const core::dimension2d<u32> texsize = tex->getSize();
void* pp = tex->lock();
if (pp)
{
const video::ECOLOR_FORMAT format = tex->getColorFormat();
if (format == video::ECF_A1R5G5B5)
{
s16* p = (s16*)pp;
s16 tmp=0;
for (u32 x=0; x<texsize.Width; x++)
for (u32 y=0; y<texsize.Height/2; y++)
{
tmp=p[y*texsize.Width + x];
p[y*texsize.Width + x] = p[(texsize.Height-y-1)*texsize.Width + x];
p[(texsize.Height-y-1)*texsize.Width + x]=tmp;
}
}
else
if (format == video::ECF_A8R8G8B8)
{
s32* p = (s32*)pp;
s32 tmp=0;
for (u32 x=0; x<texsize.Width; x++)
for (u32 y=0; y<texsize.Height/2; y++)
{
tmp=p[y*texsize.Width + x];
p[y*texsize.Width + x] = p[(texsize.Height-y-1)*texsize.Width + x];
p[(texsize.Height-y-1)*texsize.Width + x]=tmp;
}
}
}
tex->unlock();
tex->regenerateMipMapLevels();
}
//if lightmap is present mirror vertically owing to DeleD rapresentation
if (lig && header.dmfVersion<1.1)
{
const core::dimension2d<u32> ligsize=lig->getSize();
void* pp = lig->lock();
if (pp)
{
video::ECOLOR_FORMAT format = lig->getColorFormat();
if (format == video::ECF_A1R5G5B5)
{
s16* p = (s16*)pp;
s16 tmp=0;
for (u32 x=0; x<ligsize.Width; x++)
{
for (u32 y=0; y<ligsize.Height/2; y++)
{
tmp=p[y*ligsize.Width + x];
p[y*ligsize.Width + x] = p[(ligsize.Height-y-1)*ligsize.Width + x];
p[(ligsize.Height-y-1)*ligsize.Width + x]=tmp;
}
}
}
else if (format == video::ECF_A8R8G8B8)
{
s32* p = (s32*)pp;
s32 tmp=0;
for (u32 x=0; x<ligsize.Width; x++)
{
for (u32 y=0; y<ligsize.Height/2; y++)
{
tmp=p[y*ligsize.Width + x];
p[y*ligsize.Width + x] = p[(ligsize.Height-y-1)*ligsize.Width + x];
p[(ligsize.Height-y-1)*ligsize.Width + x]=tmp;
}
}
}
}
lig->unlock();
lig->regenerateMipMapLevels();
}
mat.setTexture(0, tex);
mat.setTexture(1, lig);
}
}
// create bounding box
for (i = 0; i < mesh->MeshBuffers.size(); ++i)
{
mesh->MeshBuffers[i]->recalculateBoundingBox();
}
mesh->recalculateBoundingBox();
// Set up an animated mesh to hold the mesh
SAnimatedMesh* AMesh = new SAnimatedMesh();
AMesh->Type = EAMT_UNKNOWN;
AMesh->addMesh(mesh);
AMesh->recalculateBoundingBox();
mesh->drop();
return AMesh;
}
IMeshSceneNode* CustomSceneNodeManager::CreateCylinderSceneNode(scene::ISceneManager* sceneManager, s32 id, SColor& color, unsigned int resolution, float radius, float height)
{
/*if (!cylinderMesh)
{*/
if (resolution >= 4)
{
SMesh* newCylinderMesh = new SMesh();
SMeshBuffer* buf = new SMeshBuffer();
newCylinderMesh->addMeshBuffer(buf);
buf->MappingHint_Vertex = EHM_STATIC;
buf->MappingHint_Index = EHM_STATIC;
buf->drop();
int noWarningSignedResolution = resolution;
float currentTheta = 0.0f;
float skipAmount = 2.0f*PI / (float)resolution;
float halfHeight = height / 2.0f;
S3DVertex temp1 = S3DVertex(Vector3(0.0f, halfHeight, 0.0f), Vector3_Zero, color, vector2d<f32>(0.0f, 0.0f));
S3DVertex temp2 = S3DVertex(Vector3(0.0f, -halfHeight, 0.0f), Vector3_Zero, color, vector2d<f32>(0.0f, 1.0f));
for(int i = 0; i < noWarningSignedResolution; i++)
{
float x = cosf(currentTheta) * radius;
float z = sinf(currentTheta) * radius;
temp1.Pos.X = x;
temp1.Pos.Z = z;
temp1.TCoords.X = currentTheta / 2.0f*PI;
temp2.Pos.X = x;
temp2.Pos.Z = z;
temp2.TCoords.X = currentTheta / 2.0f*PI;
buf->Vertices.push_back(temp1);
buf->Vertices.push_back(temp2);
currentTheta += skipAmount;
}
temp1.Pos.X = 0.0f;
temp1.Pos.Z = 0.0f;
temp1.TCoords.X = 0.0f;
temp2.Pos.X = 0.0f;
temp2.Pos.Z = 0.0f;
temp1.TCoords.X = 0.0f;
buf->Vertices.push_back(temp1);
buf->Vertices.push_back(temp2);
//Get indices
for(int i = 0; i < noWarningSignedResolution - 1; i++)
{
buf->Indices.push_back(i*2);
buf->Indices.push_back(i*2+2);
buf->Indices.push_back(i*2+1);
buf->Indices.push_back(i*2+1);
buf->Indices.push_back(i*2+2);
buf->Indices.push_back(i*2+3);
buf->Indices.push_back(i*2);
buf->Indices.push_back(buf->Vertices.size()-2);
buf->Indices.push_back(i*2+2);
buf->Indices.push_back(i*2+1);
buf->Indices.push_back(i*2+3);
buf->Indices.push_back(buf->Vertices.size()-1);
}
buf->Indices.push_back(buf->Vertices.size()-4);
buf->Indices.push_back(0);
buf->Indices.push_back(buf->Vertices.size()-3);
buf->Indices.push_back(buf->Vertices.size()-3);
buf->Indices.push_back(0);
buf->Indices.push_back(1);
buf->Indices.push_back(buf->Vertices.size()-4);
buf->Indices.push_back(buf->Vertices.size()-2);
buf->Indices.push_back(0);
buf->Indices.push_back(buf->Vertices.size()-3);
buf->Indices.push_back(1);
buf->Indices.push_back(buf->Vertices.size()-1);
//Calculate normals
CalculateNormals(buf->Vertices, buf->Indices);
buf->recalculateBoundingBox();
newCylinderMesh->recalculateBoundingBox();
IMeshSceneNode* node = sceneManager->addMeshSceneNode(newCylinderMesh);
newCylinderMesh->drop();
return node;
}
/* return NULL;
}
else
{
IMeshSceneNode* node = sceneManager->addMeshSceneNode(cylinderMesh);
node->setScale(Vector3(radius, height, radius));
return node;
}*/
return NULL;
}
//! creates/loads an animated mesh from the file.
//! \return Pointer to the created mesh. Returns 0 if loading failed.
//! If you no longer need the mesh, you should call IAnimatedMesh::drop().
//! See IReferenceCounted::drop() for more information.
IAnimatedMesh* COCTLoader::createMesh(io::IReadFile* file)
{
if (!file)
return 0;
octHeader header;
file->read(&header, sizeof(octHeader));
octVert * verts = new octVert[header.numVerts];
octFace * faces = new octFace[header.numFaces];
octTexture * textures = new octTexture[header.numTextures];
octLightmap * lightmaps = new octLightmap[header.numLightmaps];
octLight * lights = new octLight[header.numLights];
file->read(verts, sizeof(octVert) * header.numVerts);
file->read(faces, sizeof(octFace) * header.numFaces);
//TODO: Make sure id is in the legal range for Textures and Lightmaps
u32 i;
for (i = 0; i < header.numTextures; i++) {
octTexture t;
file->read(&t, sizeof(octTexture));
textures[t.id] = t;
}
for (i = 0; i < header.numLightmaps; i++) {
octLightmap t;
file->read(&t, sizeof(octLightmap));
lightmaps[t.id] = t;
}
file->read(lights, sizeof(octLight) * header.numLights);
//TODO: Now read in my extended OCT header (flexible lightmaps and vertex normals)
// This is the method Nikolaus Gebhardt used in the Q3 loader -- create a
// meshbuffer for every possible combination of lightmap and texture including
// a "null" texture and "null" lightmap. Ones that end up with nothing in them
// will be removed later.
SMesh * Mesh = new SMesh();
for (i=0; i<(header.numTextures+1) * (header.numLightmaps+1); ++i)
{
scene::SMeshBufferLightMap* buffer = new scene::SMeshBufferLightMap();
buffer->Material.MaterialType = video::EMT_LIGHTMAP;
buffer->Material.Lighting = false;
Mesh->addMeshBuffer(buffer);
buffer->drop();
}
// Build the mesh buffers
for (i = 0; i < header.numFaces; i++)
{
if (faces[i].numVerts < 3)
continue;
const f32* const a = verts[faces[i].firstVert].pos;
const f32* const b = verts[faces[i].firstVert+1].pos;
const f32* const c = verts[faces[i].firstVert+2].pos;
const core::vector3df normal =
core::plane3df(core::vector3df(a[0],a[1],a[2]), core::vector3df(b[0],c[1],c[2]), core::vector3df(c[0],c[1],c[2])).Normal;
const u32 textureID = core::min_(s32(faces[i].textureID), s32(header.numTextures - 1)) + 1;
const u32 lightmapID = core::min_(s32(faces[i].lightmapID),s32(header.numLightmaps - 1)) + 1;
SMeshBufferLightMap * meshBuffer = (SMeshBufferLightMap*)Mesh->getMeshBuffer(lightmapID * (header.numTextures + 1) + textureID);
const u32 base = meshBuffer->Vertices.size();
// Add this face's verts
u32 v;
for (v = 0; v < faces[i].numVerts; ++v)
{
octVert * vv = &verts[faces[i].firstVert + v];
video::S3DVertex2TCoords vert;
vert.Pos.set(vv->pos[0], vv->pos[1], vv->pos[2]);
vert.Color = video::SColor(0,255,255,255);
vert.Normal.set(normal);
if (textureID == 0)
{
// No texture -- just a lightmap. Thus, use lightmap coords for texture 1.
// (the actual texture will be swapped later)
vert.TCoords.set(vv->lc[0], vv->lc[1]);
}
else
{
vert.TCoords.set(vv->tc[0], vv->tc[1]);
vert.TCoords2.set(vv->lc[0], vv->lc[1]);
}
meshBuffer->Vertices.push_back(vert);
}
// Now add the indices
// This weird loop turns convex polygons into triangle strips.
// I do it this way instead of a simple fan because it usually looks a lot better in wireframe, for example.
// High, Low
u32 h = faces[i].numVerts - 1;
u32 l = 0;
for (v = 0; v < faces[i].numVerts - 2; ++v)
{
const u32 center = (v & 1)? h - 1: l + 1;
meshBuffer->Indices.push_back(base + h);
meshBuffer->Indices.push_back(base + l);
meshBuffer->Indices.push_back(base + center);
if (v & 1)
--h;
else
++l;
}
}
// load textures
core::array<video::ITexture*> tex;
tex.reallocate(header.numTextures + 1);
tex.push_back(0);
const core::stringc relpath = FileSystem->getFileDir(file->getFileName())+"/";
for (i = 1; i < (header.numTextures + 1); i++)
{
core::stringc path(textures[i-1].fileName);
path.replace('\\','/');
if (FileSystem->existFile(path))
tex.push_back(SceneManager->getVideoDriver()->getTexture(path));
else
// try to read in the relative path of the OCT file
tex.push_back(SceneManager->getVideoDriver()->getTexture( (relpath + path) ));
}
// prepare lightmaps
core::array<video::ITexture*> lig;
lig.set_used(header.numLightmaps + 1);
lig[0] = 0;
const u32 lightmapWidth = 128;
const u32 lightmapHeight = 128;
const core::dimension2d<u32> lmapsize(lightmapWidth, lightmapHeight);
bool oldMipMapState = SceneManager->getVideoDriver()->getTextureCreationFlag(video::ETCF_CREATE_MIP_MAPS);
SceneManager->getVideoDriver()->setTextureCreationFlag(video::ETCF_CREATE_MIP_MAPS, false);
video::CImage tmpImage(video::ECF_R8G8B8, lmapsize);
for (i = 1; i < (header.numLightmaps + 1); ++i)
{
core::stringc lightmapname = file->getFileName();
lightmapname += ".lightmap.";
lightmapname += (int)i;
const octLightmap* lm = &lightmaps[i-1];
for (u32 x=0; x<lightmapWidth; ++x)
{
for (u32 y=0; y<lightmapHeight; ++y)
{
tmpImage.setPixel(x, y,
video::SColor(255,
lm->data[x][y][2],
lm->data[x][y][1],
lm->data[x][y][0]));
}
}
lig[i] = SceneManager->getVideoDriver()->addTexture(lightmapname.c_str(), &tmpImage);
}
SceneManager->getVideoDriver()->setTextureCreationFlag(video::ETCF_CREATE_MIP_MAPS, oldMipMapState);
// Free stuff
delete [] verts;
delete [] faces;
delete [] textures;
delete [] lightmaps;
delete [] lights;
// attach materials
for (i = 0; i < header.numLightmaps + 1; i++)
{
for (u32 j = 0; j < header.numTextures + 1; j++)
{
u32 mb = i * (header.numTextures + 1) + j;
SMeshBufferLightMap * meshBuffer = (SMeshBufferLightMap*)Mesh->getMeshBuffer(mb);
meshBuffer->Material.setTexture(0, tex[j]);
meshBuffer->Material.setTexture(1, lig[i]);
if (meshBuffer->Material.getTexture(0) == 0)
{
// This material has no texture, so we'll just show the lightmap if there is one.
// We swapped the texture coordinates earlier.
meshBuffer->Material.setTexture(0, meshBuffer->Material.getTexture(1));
meshBuffer->Material.setTexture(1, 0);
}
if (meshBuffer->Material.getTexture(1) == 0)
{
// If there is only one texture, it should be solid and lit.
// Among other things, this way you can preview OCT lights.
meshBuffer->Material.MaterialType = video::EMT_SOLID;
meshBuffer->Material.Lighting = true;
}
}
}
// delete all buffers without geometry in it.
i = 0;
while(i < Mesh->MeshBuffers.size())
{
if (Mesh->MeshBuffers[i]->getVertexCount() == 0 ||
Mesh->MeshBuffers[i]->getIndexCount() == 0 ||
Mesh->MeshBuffers[i]->getMaterial().getTexture(0) == 0)
{
// Meshbuffer is empty -- drop it
Mesh->MeshBuffers[i]->drop();
Mesh->MeshBuffers.erase(i);
}
else
{
++i;
}
}
// create bounding box
for (i = 0; i < Mesh->MeshBuffers.size(); ++i)
{
Mesh->MeshBuffers[i]->recalculateBoundingBox();
}
Mesh->recalculateBoundingBox();
// Set up an animated mesh to hold the mesh
SAnimatedMesh* AMesh = new SAnimatedMesh();
AMesh->Type = EAMT_OCT;
AMesh->addMesh(Mesh);
AMesh->recalculateBoundingBox();
Mesh->drop();
return AMesh;
}
//! creates/loads an animated mesh from the file.
//! \return Pointer to the created mesh. Returns 0 if loading failed.
//! If you no longer need the mesh, you should call IAnimatedMesh::drop().
//! See IReferenceCounted::drop() for more information.
IAnimatedMesh* COCTLoader::createMesh(io::IReadFile* file)
{
if (!file)
return 0;
octHeader header;
file->read(&header, sizeof(octHeader));
octVert * verts = new octVert[header.numVerts];
octFace * faces = new octFace[header.numFaces];
octTexture * textures = new octTexture[header.numTextures];
octLightmap * lightmaps = new octLightmap[header.numLightmaps];
octLight * lights = new octLight[header.numLights];
file->read(verts, sizeof(octVert) * header.numVerts);
file->read(faces, sizeof(octFace) * header.numFaces);
//TODO: Make sure id is in the legal range for Textures and Lightmaps
u32 i;
for (i = 0; i < header.numTextures; i++) {
octTexture t;
file->read(&t, sizeof(octTexture));
textures[t.id] = t;
}
for (i = 0; i < header.numLightmaps; i++) {
octLightmap t;
file->read(&t, sizeof(octLightmap));
lightmaps[t.id] = t;
}
file->read(lights, sizeof(octLight) * header.numLights);
//TODO: Now read in my extended OCT header (flexible lightmaps and vertex normals)
// This is the method Nikolaus Gebhardt used in the Q3 loader -- create a
// meshbuffer for every possible combination of lightmap and texture including
// a "null" texture and "null" lightmap. Ones that end up with nothing in them
// will be removed later.
SMesh * Mesh = new SMesh();
for (i=0; i<(header.numTextures+1) * (header.numLightmaps+1); ++i)
{
scene::SMeshBufferLightMap* buffer = new scene::SMeshBufferLightMap();
buffer->Material.MaterialType = video::EMT_LIGHTMAP;
buffer->Material.Lighting = false;
Mesh->addMeshBuffer(buffer);
buffer->drop();
}
// Build the mesh buffers
for (i = 0; i < header.numFaces; i++)
{
if (faces[i].numVerts < 3)
continue;
const core::vector3df normal =
GetFaceNormal(verts[faces[i].firstVert].pos,
verts[faces[i].firstVert+1].pos,
verts[faces[i].firstVert+2].pos);
const u32 textureID = core::min_(s32(faces[i].textureID), s32(header.numTextures - 1)) + 1;
const u32 lightmapID = core::min_(s32(faces[i].lightmapID),s32(header.numLightmaps - 1)) + 1;
SMeshBufferLightMap * meshBuffer = (SMeshBufferLightMap*)Mesh->getMeshBuffer(lightmapID * (header.numTextures + 1) + textureID);
const u32 base = meshBuffer->Vertices.size();
// Add this face's verts
u32 v;
for (v = 0; v < faces[i].numVerts; ++v)
{
octVert * vv = &verts[faces[i].firstVert + v];
video::S3DVertex2TCoords vert;
vert.Pos.set(vv->pos[0], vv->pos[1], vv->pos[2]);
vert.Color = video::SColor(0,255,255,255);
vert.Normal.set(normal);
if (textureID == 0)
{
// No texture -- just a lightmap. Thus, use lightmap coords for texture 1.
// (the actual texture will be swapped later)
vert.TCoords.set(vv->lc[0], vv->lc[1]);
}
else
{
vert.TCoords.set(vv->tc[0], vv->tc[1]);
vert.TCoords2.set(vv->lc[0], vv->lc[1]);
}
meshBuffer->Vertices.push_back(vert);
}
// Now add the indices
// This weird loop turns convex polygons into triangle strips.
// I do it this way instead of a simple fan because it usually looks a lot better in wireframe, for example.
u32 h = faces[i].numVerts - 1, l = 0, c; // High, Low, Center
for (v = 0; v < faces[i].numVerts - 2; ++v)
{
if (v & 1)
c = h - 1;
else
c = l + 1;
meshBuffer->Indices.push_back(base + h);
meshBuffer->Indices.push_back(base + l);
meshBuffer->Indices.push_back(base + c);
if (v & 1)
--h;
else
++l;
}
}
// load textures
core::array<video::ITexture*> tex;
tex.set_used(header.numTextures + 1);
tex[0] = 0;
for (i = 1; i < (header.numTextures + 1); i++)
{
tex[i] = Driver->getTexture(textures[i-1].fileName);
}
// prepare lightmaps
core::array<video::ITexture*> lig;
lig.set_used(header.numLightmaps + 1);
u32 lightmapWidth = 128, lightmapHeight = 128;
lig[0] = 0;
core::dimension2d<s32> lmapsize(lightmapWidth, lightmapHeight);
bool oldMipMapState = Driver->getTextureCreationFlag(video::ETCF_CREATE_MIP_MAPS);
Driver->setTextureCreationFlag(video::ETCF_CREATE_MIP_MAPS, false);
for (i = 1; i < (header.numLightmaps + 1); i++)
{
core::stringc lightmapname = file->getFileName();
lightmapname += ".lightmap.";
lightmapname += (int)i;
lig[i] = Driver->addTexture(lmapsize, lightmapname.c_str());
if (lig[i]->getSize() != lmapsize)
os::Printer::log("OCTLoader: Created lightmap is not of the requested size", ELL_ERROR);
if (lig[i])
{
void* pp = lig[i]->lock();
if (pp)
{
video::ECOLOR_FORMAT format = lig[i]->getColorFormat();
if (format == video::ECF_A1R5G5B5)
{
s16* p = (s16*)pp;
octLightmap * lm;
lm = &lightmaps[i-1];
for (u32 x=0; x<lightmapWidth; ++x)
for (u32 y=0; y<lightmapHeight; ++y)
{
p[x*128 + y] = video::RGB16(
lm->data[x][y][2],
lm->data[x][y][1],
lm->data[x][y][0]);
}
}
else
if (format == video::ECF_A8R8G8B8)
{
s32* p = (s32*)pp;
octLightmap* lm;
lm = &lightmaps[i-1];
for (u32 x=0; x<lightmapWidth; ++x)
for (u32 y=0; y<lightmapHeight; ++y)
{
p[x*128 + y] = video::SColor(255,
lm->data[x][y][2],
lm->data[x][y][1],
lm->data[x][y][0]).color;
}
}
else
os::Printer::log(
"OCTLoader: Could not create lightmap, unsupported texture format.", ELL_ERROR);
}
lig[i]->unlock();
}
else
os::Printer::log("OCTLoader: Could not create lightmap, driver created no texture.", ELL_ERROR);
}
Driver->setTextureCreationFlag(video::ETCF_CREATE_MIP_MAPS, oldMipMapState);
// Free stuff
delete [] verts;
delete [] faces;
delete [] textures;
delete [] lightmaps;
delete [] lights;
// attach materials
for (i = 0; i < header.numLightmaps + 1; i++)
{
for (u32 j = 0; j < header.numTextures + 1; j++)
{
u32 mb = i * (header.numTextures + 1) + j;
SMeshBufferLightMap * meshBuffer = (SMeshBufferLightMap*)Mesh->getMeshBuffer(mb);
meshBuffer->Material.setTexture(0, tex[j]);
meshBuffer->Material.setTexture(1, lig[i]);
if (meshBuffer->Material.getTexture(0) == 0)
{
// This material has no texture, so we'll just show the lightmap if there is one.
// We swapped the texture coordinates earlier.
meshBuffer->Material.setTexture(0, meshBuffer->Material.getTexture(1));
meshBuffer->Material.setTexture(1, 0);
}
if (meshBuffer->Material.getTexture(1) == 0)
{
// If there is only one texture, it should be solid and lit.
// Among other things, this way you can preview OCT lights.
meshBuffer->Material.MaterialType = video::EMT_SOLID;
meshBuffer->Material.Lighting = true;
}
}
}
// delete all buffers without geometry in it.
i = 0;
while(i < Mesh->MeshBuffers.size())
{
if (Mesh->MeshBuffers[i]->getVertexCount() == 0 ||
Mesh->MeshBuffers[i]->getIndexCount() == 0 ||
Mesh->MeshBuffers[i]->getMaterial().getTexture(0) == 0)
{
// Meshbuffer is empty -- drop it
Mesh->MeshBuffers[i]->drop();
Mesh->MeshBuffers.erase(i);
}
else
{
++i;
}
}
// create bounding box
for (i = 0; i < Mesh->MeshBuffers.size(); ++i)
{
Mesh->MeshBuffers[i]->recalculateBoundingBox();
}
Mesh->recalculateBoundingBox();
// Set up an animated mesh to hold the mesh
SAnimatedMesh* AMesh = new SAnimatedMesh();
AMesh->Type = EAMT_OCT;
AMesh->addMesh(Mesh);
AMesh->recalculateBoundingBox();
Mesh->drop();
return AMesh;
}
