void CmdSketcherReorientSketch::activated(int iMsg)
{
Sketcher::SketchObject* sketch = Gui::Selection().getObjectsOfType<Sketcher::SketchObject>().front();
if (sketch->Support.getValue()) {
int ret = QMessageBox::question(Gui::getMainWindow(),
qApp->translate("Sketcher_ReorientSketch","Sketch has support"),
qApp->translate("Sketcher_ReorientSketch","Sketch with a support face cannot be reoriented.\n"
"Do you want to detach it from the support?"),
QMessageBox::Yes|QMessageBox::No);
if (ret == QMessageBox::No)
return;
sketch->Support.setValue(0);
}
// ask user for orientation
SketchOrientationDialog Dlg;
if (Dlg.exec() != QDialog::Accepted)
return; // canceled
Base::Vector3d p = Dlg.Pos.getPosition();
Base::Rotation r = Dlg.Pos.getRotation();
// do the right view direction
std::string camstring;
switch(Dlg.DirType){
case 0:
camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA \\n "
"position 0 0 87 \\n orientation 0 0 1 0 \\n nearDistance -112.88701 \\n farDistance 287.28702 \\n "
"aspectRatio 1 \\n focalDistance 87 \\n height 143.52005 }";
break;
case 1:
camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA \\n "
"position 0 0 -87 \\n orientation -1 0 0 3.1415927 \\n nearDistance -112.88701 \\n farDistance 287.28702 \\n "
"aspectRatio 1 \\n focalDistance 87 \\n height 143.52005 }";
break;
case 2:
camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA\\n "
"position 0 -87 0 \\n orientation -1 0 0 4.712389\\n nearDistance -112.88701\\n farDistance 287.28702\\n "
"aspectRatio 1\\n focalDistance 87\\n height 143.52005\\n\\n}";
break;
case 3:
camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA\\n "
"position 0 87 0 \\n orientation 0 0.70710683 0.70710683 3.1415927\\n nearDistance -112.88701\\n farDistance 287.28702\\n "
"aspectRatio 1\\n focalDistance 87\\n height 143.52005\\n\\n}";
break;
case 4:
camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA\\n "
"position 87 0 0 \\n orientation 0.57735026 0.57735026 0.57735026 2.0943952 \\n nearDistance -112.887\\n farDistance 287.28699\\n "
"aspectRatio 1\\n focalDistance 87\\n height 143.52005\\n\\n}";
break;
case 5:
camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA\\n "
"position -87 0 0 \\n orientation -0.57735026 0.57735026 0.57735026 4.1887903 \\n nearDistance -112.887\\n farDistance 287.28699\\n "
"aspectRatio 1\\n focalDistance 87\\n height 143.52005\\n\\n}";
break;
}
openCommand("Reorient Sketch");
doCommand(Doc,"App.ActiveDocument.%s.Placement = App.Placement(App.Vector(%f,%f,%f),App.Rotation(%f,%f,%f,%f))"
,sketch->getNameInDocument(),p.x,p.y,p.z,r[0],r[1],r[2],r[3]);
doCommand(Gui,"Gui.ActiveDocument.setEdit('%s')",sketch->getNameInDocument());
}
void CmdSketcherNewSketch::activated(int iMsg)
{
Gui::SelectionFilter SketchFilter("SELECT Sketcher::SketchObject COUNT 1");
Gui::SelectionFilter FaceFilter ("SELECT Part::Feature SUBELEMENT Face COUNT 1");
if (SketchFilter.match()) {
Sketcher::SketchObject *Sketch = static_cast<Sketcher::SketchObject*>(SketchFilter.Result[0][0].getObject());
openCommand("Edit Sketch");
doCommand(Gui,"Gui.activeDocument().setEdit('%s')",Sketch->getNameInDocument());
}
else if (FaceFilter.match()) {
// get the selected object
Part::Feature *part = static_cast<Part::Feature*>(FaceFilter.Result[0][0].getObject());
Base::Placement ObjectPos = part->Placement.getValue();
const std::vector<std::string> &sub = FaceFilter.Result[0][0].getSubNames();
if (sub.size() > 1){
// No assert for wrong user input!
QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Several sub-elements selected"),
QObject::tr("You have to select a single face as support for a sketch!"));
return;
}
// get the selected sub shape (a Face)
const Part::TopoShape &shape = part->Shape.getValue();
TopoDS_Shape sh = shape.getSubShape(sub[0].c_str());
const TopoDS_Face& face = TopoDS::Face(sh);
if (face.IsNull()){
// No assert for wrong user input!
QMessageBox::warning(Gui::getMainWindow(), QObject::tr("No support face selected"),
QObject::tr("You have to select a face as support for a sketch!"));
return;
}
BRepAdaptor_Surface adapt(face);
if (adapt.GetType() != GeomAbs_Plane){
QMessageBox::warning(Gui::getMainWindow(), QObject::tr("No planar support"),
QObject::tr("You need a planar face as support for a sketch!"));
return;
}
std::string supportString = FaceFilter.Result[0][0].getAsPropertyLinkSubString();
// create Sketch on Face
std::string FeatName = getUniqueObjectName("Sketch");
openCommand("Create a Sketch on Face");
doCommand(Doc,"App.activeDocument().addObject('Sketcher::SketchObject','%s')",FeatName.c_str());
doCommand(Gui,"App.activeDocument().%s.Support = %s",FeatName.c_str(),supportString.c_str());
doCommand(Gui,"App.activeDocument().recompute()"); // recompute the sketch placement based on its support
//doCommand(Gui,"Gui.activeDocument().activeView().setCamera('%s')",cam.c_str());
doCommand(Gui,"Gui.activeDocument().setEdit('%s')",FeatName.c_str());
}
else {
// ask user for orientation
SketchOrientationDialog Dlg;
if (Dlg.exec() != QDialog::Accepted)
return; // canceled
Base::Vector3d p = Dlg.Pos.getPosition();
Base::Rotation r = Dlg.Pos.getRotation();
// do the right view direction
std::string camstring;
switch(Dlg.DirType){
case 0:
camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA \\n position 0 0 87 \\n orientation 0 0 1 0 \\n nearDistance -112.88701 \\n farDistance 287.28702 \\n aspectRatio 1 \\n focalDistance 87 \\n height 143.52005 }";
break;
case 1:
camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA \\n position 0 0 -87 \\n orientation -1 0 0 3.1415927 \\n nearDistance -112.88701 \\n farDistance 287.28702 \\n aspectRatio 1 \\n focalDistance 87 \\n height 143.52005 }";
break;
case 2:
camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA\\n position 0 -87 0 \\n orientation -1 0 0 4.712389\\n nearDistance -112.88701\\n farDistance 287.28702\\n aspectRatio 1\\n focalDistance 87\\n height 143.52005\\n\\n}";
break;
case 3:
camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA\\n position 0 87 0 \\n orientation 0 0.70710683 0.70710683 3.1415927\\n nearDistance -112.88701\\n farDistance 287.28702\\n aspectRatio 1\\n focalDistance 87\\n height 143.52005\\n\\n}";
break;
case 4:
camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA\\n position 87 0 0 \\n orientation 0.57735026 0.57735026 0.57735026 2.0943952 \\n nearDistance -112.887\\n farDistance 287.28699\\n aspectRatio 1\\n focalDistance 87\\n height 143.52005\\n\\n}";
break;
case 5:
camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA\\n position -87 0 0 \\n orientation -0.57735026 0.57735026 0.57735026 4.1887903 \\n nearDistance -112.887\\n farDistance 287.28699\\n aspectRatio 1\\n focalDistance 87\\n height 143.52005\\n\\n}";
break;
}
std::string FeatName = getUniqueObjectName("Sketch");
openCommand("Create a new Sketch");
doCommand(Doc,"App.activeDocument().addObject('Sketcher::SketchObject','%s')",FeatName.c_str());
doCommand(Doc,"App.activeDocument().%s.Placement = App.Placement(App.Vector(%f,%f,%f),App.Rotation(%f,%f,%f,%f))",FeatName.c_str(),p.x,p.y,p.z,r[0],r[1],r[2],r[3]);
doCommand(Gui,"Gui.activeDocument().activeView().setCamera('%s')",camstring.c_str());
doCommand(Gui,"Gui.activeDocument().setEdit('%s')",FeatName.c_str());
}
}
void CmdSketcherNewSketch::activated(int iMsg)
{
Attacher::eMapMode mapmode = Attacher::mmDeactivated;
bool bAttach = false;
if (Gui::Selection().hasSelection()){
Attacher::SuggestResult::eSuggestResult msgid = Attacher::SuggestResult::srOK;
QString msg_str;
std::vector<Attacher::eMapMode> validModes;
mapmode = SuggestAutoMapMode(&msgid, &msg_str, &validModes);
if (msgid == Attacher::SuggestResult::srOK)
bAttach = true;
if (msgid != Attacher::SuggestResult::srOK && msgid != Attacher::SuggestResult::srNoModesFit){
QMessageBox::warning(Gui::getMainWindow(),
QObject::tr("Sketch mapping"),
QObject::tr("Can't map the skecth to selected object. %1.").arg(msg_str));
return;
}
if (validModes.size() > 1){
validModes.insert(validModes.begin(), Attacher::mmDeactivated);
bool ok;
QStringList items;
items.push_back(QObject::tr("Don't attach"));
int iSugg = 0;//index of the auto-suggested mode in the list of valid modes
for (size_t i = 0 ; i < validModes.size() ; ++i){
items.push_back(QString::fromLatin1(AttachEngine::getModeName(validModes[i]).c_str()));
if (validModes[i] == mapmode)
iSugg = items.size()-1;
}
QString text = QInputDialog::getItem(Gui::getMainWindow(),
qApp->translate(className(), "Sketch attachment"),
qApp->translate(className(), "Select the method to attach this sketch to selected object"),
items, iSugg, false, &ok);
if (!ok) return;
int index = items.indexOf(text);
if (index == 0){
bAttach = false;
mapmode = Attacher::mmDeactivated;
} else {
bAttach = true;
mapmode = validModes[index-1];
}
}
}
if (bAttach) {
std::vector<Gui::SelectionObject> objects = Gui::Selection().getSelectionEx();
//assert (objects.size() == 1); //should have been filtered out by SuggestAutoMapMode
//Gui::SelectionObject &sel_support = objects[0];
App::PropertyLinkSubList support;
Gui::Selection().getAsPropertyLinkSubList(support);
std::string supportString = support.getPyReprString();
// create Sketch on Face
std::string FeatName = getUniqueObjectName("Sketch");
openCommand("Create a Sketch on Face");
doCommand(Doc,"App.activeDocument().addObject('Sketcher::SketchObject','%s')",FeatName.c_str());
if (mapmode >= 0 && mapmode < Attacher::mmDummy_NumberOfModes)
doCommand(Gui,"App.activeDocument().%s.MapMode = \"%s\"",FeatName.c_str(),AttachEngine::getModeName(mapmode).c_str());
else
assert(0 /* mapmode index out of range */);
doCommand(Gui,"App.activeDocument().%s.Support = %s",FeatName.c_str(),supportString.c_str());
doCommand(Gui,"App.activeDocument().recompute()"); // recompute the sketch placement based on its support
doCommand(Gui,"Gui.activeDocument().setEdit('%s')",FeatName.c_str());
Part::Feature *part = static_cast<Part::Feature*>(support.getValue());//if multi-part support, this will return 0
if (part){
App::DocumentObjectGroup* grp = part->getGroup();
if (grp) {
doCommand(Doc,"App.activeDocument().%s.addObject(App.activeDocument().%s)"
,grp->getNameInDocument(),FeatName.c_str());
}
}
}
else {
// ask user for orientation
SketchOrientationDialog Dlg;
if (Dlg.exec() != QDialog::Accepted)
return; // canceled
Base::Vector3d p = Dlg.Pos.getPosition();
Base::Rotation r = Dlg.Pos.getRotation();
// do the right view direction
std::string camstring;
switch(Dlg.DirType){
case 0:
camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA \\n position 0 0 87 \\n orientation 0 0 1 0 \\n nearDistance -112.88701 \\n farDistance 287.28702 \\n aspectRatio 1 \\n focalDistance 87 \\n height 143.52005 }";
break;
case 1:
camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA \\n position 0 0 -87 \\n orientation -1 0 0 3.1415927 \\n nearDistance -112.88701 \\n farDistance 287.28702 \\n aspectRatio 1 \\n focalDistance 87 \\n height 143.52005 }";
break;
case 2:
camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA\\n position 0 -87 0 \\n orientation -1 0 0 4.712389\\n nearDistance -112.88701\\n farDistance 287.28702\\n aspectRatio 1\\n focalDistance 87\\n height 143.52005\\n\\n}";
break;
case 3:
camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA\\n position 0 87 0 \\n orientation 0 0.70710683 0.70710683 3.1415927\\n nearDistance -112.88701\\n farDistance 287.28702\\n aspectRatio 1\\n focalDistance 87\\n height 143.52005\\n\\n}";
break;
case 4:
camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA\\n position 87 0 0 \\n orientation 0.57735026 0.57735026 0.57735026 2.0943952 \\n nearDistance -112.887\\n farDistance 287.28699\\n aspectRatio 1\\n focalDistance 87\\n height 143.52005\\n\\n}";
break;
case 5:
camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA\\n position -87 0 0 \\n orientation -0.57735026 0.57735026 0.57735026 4.1887903 \\n nearDistance -112.887\\n farDistance 287.28699\\n aspectRatio 1\\n focalDistance 87\\n height 143.52005\\n\\n}";
break;
}
std::string FeatName = getUniqueObjectName("Sketch");
openCommand("Create a new Sketch");
doCommand(Doc,"App.activeDocument().addObject('Sketcher::SketchObject','%s')",FeatName.c_str());
doCommand(Doc,"App.activeDocument().%s.Placement = App.Placement(App.Vector(%f,%f,%f),App.Rotation(%f,%f,%f,%f))",FeatName.c_str(),p.x,p.y,p.z,r[0],r[1],r[2],r[3]);
doCommand(Doc,"App.activeDocument().%s.MapMode = \"%s\"",FeatName.c_str(),AttachEngine::getModeName(Attacher::mmDeactivated).c_str());
doCommand(Gui,"Gui.activeDocument().activeView().setCamera('%s')",camstring.c_str());
doCommand(Gui,"Gui.activeDocument().setEdit('%s')",FeatName.c_str());
}
}
