Example #1
0
void CmdSketcherReorientSketch::activated(int iMsg)
{
    Sketcher::SketchObject* sketch = Gui::Selection().getObjectsOfType<Sketcher::SketchObject>().front();
    if (sketch->Support.getValue()) {
        int ret = QMessageBox::question(Gui::getMainWindow(),
            qApp->translate("Sketcher_ReorientSketch","Sketch has support"),
            qApp->translate("Sketcher_ReorientSketch","Sketch with a support face cannot be reoriented.\n"
                                                      "Do you want to detach it from the support?"),
            QMessageBox::Yes|QMessageBox::No);
        if (ret == QMessageBox::No)
            return;
        sketch->Support.setValue(0);
    }

    // ask user for orientation
    SketchOrientationDialog Dlg;

    if (Dlg.exec() != QDialog::Accepted)
        return; // canceled
    Base::Vector3d p = Dlg.Pos.getPosition();
    Base::Rotation r = Dlg.Pos.getRotation();

    // do the right view direction
    std::string camstring;
    switch(Dlg.DirType){
        case 0:
            camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA \\n "
                "position 0 0 87 \\n orientation 0 0 1  0 \\n nearDistance -112.88701 \\n farDistance 287.28702 \\n "
                "aspectRatio 1 \\n focalDistance 87 \\n height 143.52005 }";
            break;
        case 1:
            camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA \\n "
                "position 0 0 -87 \\n orientation -1 0 0  3.1415927 \\n nearDistance -112.88701 \\n farDistance 287.28702 \\n "
                "aspectRatio 1 \\n focalDistance 87 \\n height 143.52005 }";
            break;
        case 2:
            camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA\\n "
                "position 0 -87 0 \\n  orientation -1 0 0  4.712389\\n  nearDistance -112.88701\\n  farDistance 287.28702\\n "
                "aspectRatio 1\\n  focalDistance 87\\n  height 143.52005\\n\\n}";
            break;
        case 3:
            camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA\\n "
                "position 0 87 0 \\n  orientation 0 0.70710683 0.70710683  3.1415927\\n  nearDistance -112.88701\\n  farDistance 287.28702\\n "
                "aspectRatio 1\\n  focalDistance 87\\n  height 143.52005\\n\\n}";
            break;
        case 4:
            camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA\\n "
                "position 87 0 0 \\n  orientation 0.57735026 0.57735026 0.57735026  2.0943952 \\n  nearDistance -112.887\\n  farDistance 287.28699\\n "
                "aspectRatio 1\\n  focalDistance 87\\n  height 143.52005\\n\\n}";
            break;
        case 5:
            camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA\\n "
                "position -87 0 0 \\n  orientation -0.57735026 0.57735026 0.57735026  4.1887903 \\n  nearDistance -112.887\\n  farDistance 287.28699\\n "
                "aspectRatio 1\\n  focalDistance 87\\n  height 143.52005\\n\\n}";
            break;
    }

    openCommand("Reorient Sketch");
    doCommand(Doc,"App.ActiveDocument.%s.Placement = App.Placement(App.Vector(%f,%f,%f),App.Rotation(%f,%f,%f,%f))"
                 ,sketch->getNameInDocument(),p.x,p.y,p.z,r[0],r[1],r[2],r[3]);
    doCommand(Gui,"Gui.ActiveDocument.setEdit('%s')",sketch->getNameInDocument());
}
Example #2
0
void CmdSketcherNewSketch::activated(int iMsg)
{
    Gui::SelectionFilter SketchFilter("SELECT Sketcher::SketchObject COUNT 1");
    Gui::SelectionFilter FaceFilter  ("SELECT Part::Feature SUBELEMENT Face COUNT 1");

    if (SketchFilter.match()) {
        Sketcher::SketchObject *Sketch = static_cast<Sketcher::SketchObject*>(SketchFilter.Result[0][0].getObject());
        openCommand("Edit Sketch");
        doCommand(Gui,"Gui.activeDocument().setEdit('%s')",Sketch->getNameInDocument());
    }
    else if (FaceFilter.match()) {
        // get the selected object
        Part::Feature *part = static_cast<Part::Feature*>(FaceFilter.Result[0][0].getObject());
        Base::Placement ObjectPos = part->Placement.getValue();
        const std::vector<std::string> &sub = FaceFilter.Result[0][0].getSubNames();
        if (sub.size() > 1){
            // No assert for wrong user input!
            QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Several sub-elements selected"),
                QObject::tr("You have to select a single face as support for a sketch!"));
            return;
        }
        // get the selected sub shape (a Face)
        const Part::TopoShape &shape = part->Shape.getValue();
        TopoDS_Shape sh = shape.getSubShape(sub[0].c_str());
        const TopoDS_Face& face = TopoDS::Face(sh);
        if (face.IsNull()){
            // No assert for wrong user input!
            QMessageBox::warning(Gui::getMainWindow(), QObject::tr("No support face selected"),
                QObject::tr("You have to select a face as support for a sketch!"));
            return;
        }

        BRepAdaptor_Surface adapt(face);
        if (adapt.GetType() != GeomAbs_Plane){
            QMessageBox::warning(Gui::getMainWindow(), QObject::tr("No planar support"),
                QObject::tr("You need a planar face as support for a sketch!"));
            return;
        }

        std::string supportString = FaceFilter.Result[0][0].getAsPropertyLinkSubString();

        // create Sketch on Face
        std::string FeatName = getUniqueObjectName("Sketch");

        openCommand("Create a Sketch on Face");
        doCommand(Doc,"App.activeDocument().addObject('Sketcher::SketchObject','%s')",FeatName.c_str());
        doCommand(Gui,"App.activeDocument().%s.Support = %s",FeatName.c_str(),supportString.c_str());
        doCommand(Gui,"App.activeDocument().recompute()");  // recompute the sketch placement based on its support
        //doCommand(Gui,"Gui.activeDocument().activeView().setCamera('%s')",cam.c_str());
        doCommand(Gui,"Gui.activeDocument().setEdit('%s')",FeatName.c_str());
    }
    else {
        // ask user for orientation
        SketchOrientationDialog Dlg;

        if (Dlg.exec() != QDialog::Accepted)
            return; // canceled
        Base::Vector3d p = Dlg.Pos.getPosition();
        Base::Rotation r = Dlg.Pos.getRotation();

        // do the right view direction
        std::string camstring;
        switch(Dlg.DirType){
            case 0:
                camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA \\n position 0 0 87 \\n orientation 0 0 1  0 \\n nearDistance -112.88701 \\n farDistance 287.28702 \\n aspectRatio 1 \\n focalDistance 87 \\n height 143.52005 }";
                break;
            case 1:
                camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA \\n position 0 0 -87 \\n orientation -1 0 0  3.1415927 \\n nearDistance -112.88701 \\n farDistance 287.28702 \\n aspectRatio 1 \\n focalDistance 87 \\n height 143.52005 }";
                break;
            case 2:
                camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA\\n  position 0 -87 0 \\n  orientation -1 0 0  4.712389\\n  nearDistance -112.88701\\n  farDistance 287.28702\\n  aspectRatio 1\\n  focalDistance 87\\n  height 143.52005\\n\\n}";
                break;
            case 3:
                camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA\\n  position 0 87 0 \\n  orientation 0 0.70710683 0.70710683  3.1415927\\n  nearDistance -112.88701\\n  farDistance 287.28702\\n  aspectRatio 1\\n  focalDistance 87\\n  height 143.52005\\n\\n}";
                break;
            case 4:
                camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA\\n  position 87 0 0 \\n  orientation 0.57735026 0.57735026 0.57735026  2.0943952 \\n  nearDistance -112.887\\n  farDistance 287.28699\\n  aspectRatio 1\\n  focalDistance 87\\n  height 143.52005\\n\\n}";
                break;
            case 5:
                camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA\\n  position -87 0 0 \\n  orientation -0.57735026 0.57735026 0.57735026  4.1887903 \\n  nearDistance -112.887\\n  farDistance 287.28699\\n  aspectRatio 1\\n  focalDistance 87\\n  height 143.52005\\n\\n}";
                break;
        }
        std::string FeatName = getUniqueObjectName("Sketch");

        openCommand("Create a new Sketch");
        doCommand(Doc,"App.activeDocument().addObject('Sketcher::SketchObject','%s')",FeatName.c_str());
        doCommand(Doc,"App.activeDocument().%s.Placement = App.Placement(App.Vector(%f,%f,%f),App.Rotation(%f,%f,%f,%f))",FeatName.c_str(),p.x,p.y,p.z,r[0],r[1],r[2],r[3]);
        doCommand(Gui,"Gui.activeDocument().activeView().setCamera('%s')",camstring.c_str());
        doCommand(Gui,"Gui.activeDocument().setEdit('%s')",FeatName.c_str());
    }

}
Example #3
0
void CmdSketcherNewSketch::activated(int iMsg)
{
    Attacher::eMapMode mapmode = Attacher::mmDeactivated;
    bool bAttach = false;
    if (Gui::Selection().hasSelection()){
        Attacher::SuggestResult::eSuggestResult msgid = Attacher::SuggestResult::srOK;
        QString msg_str;
        std::vector<Attacher::eMapMode> validModes;
        mapmode = SuggestAutoMapMode(&msgid, &msg_str, &validModes);
        if (msgid == Attacher::SuggestResult::srOK)
            bAttach = true;
        if (msgid != Attacher::SuggestResult::srOK && msgid != Attacher::SuggestResult::srNoModesFit){
            QMessageBox::warning(Gui::getMainWindow(),
                QObject::tr("Sketch mapping"),
                QObject::tr("Can't map the skecth to selected object. %1.").arg(msg_str));
            return;
        }
        if (validModes.size() > 1){
            validModes.insert(validModes.begin(), Attacher::mmDeactivated);
            bool ok;
            QStringList items;
            items.push_back(QObject::tr("Don't attach"));
            int iSugg = 0;//index of the auto-suggested mode in the list of valid modes
            for (size_t i = 0  ;  i < validModes.size()  ;  ++i){
                items.push_back(QString::fromLatin1(AttachEngine::getModeName(validModes[i]).c_str()));
                if (validModes[i] == mapmode)
                    iSugg = items.size()-1;
            }
            QString text = QInputDialog::getItem(Gui::getMainWindow(),
                qApp->translate(className(), "Sketch attachment"),
                qApp->translate(className(), "Select the method to attach this sketch to selected object"),
                items, iSugg, false, &ok);
            if (!ok) return;
            int index = items.indexOf(text);
            if (index == 0){
                bAttach = false;
                mapmode = Attacher::mmDeactivated;
            } else {
                bAttach = true;
                mapmode = validModes[index-1];
            }
        }
    }

    if (bAttach) {

        std::vector<Gui::SelectionObject> objects = Gui::Selection().getSelectionEx();
        //assert (objects.size() == 1); //should have been filtered out by SuggestAutoMapMode
        //Gui::SelectionObject &sel_support = objects[0];
        App::PropertyLinkSubList support;
        Gui::Selection().getAsPropertyLinkSubList(support);
        std::string supportString = support.getPyReprString();

        // create Sketch on Face
        std::string FeatName = getUniqueObjectName("Sketch");

        openCommand("Create a Sketch on Face");
        doCommand(Doc,"App.activeDocument().addObject('Sketcher::SketchObject','%s')",FeatName.c_str());
        if (mapmode >= 0 && mapmode < Attacher::mmDummy_NumberOfModes)
            doCommand(Gui,"App.activeDocument().%s.MapMode = \"%s\"",FeatName.c_str(),AttachEngine::getModeName(mapmode).c_str());
        else
            assert(0 /* mapmode index out of range */);
        doCommand(Gui,"App.activeDocument().%s.Support = %s",FeatName.c_str(),supportString.c_str());
        doCommand(Gui,"App.activeDocument().recompute()");  // recompute the sketch placement based on its support
        doCommand(Gui,"Gui.activeDocument().setEdit('%s')",FeatName.c_str());

        Part::Feature *part = static_cast<Part::Feature*>(support.getValue());//if multi-part support, this will return 0
        if (part){
            App::DocumentObjectGroup* grp = part->getGroup();
            if (grp) {
                doCommand(Doc,"App.activeDocument().%s.addObject(App.activeDocument().%s)"
                             ,grp->getNameInDocument(),FeatName.c_str());
            }
        }
    }
    else {
        // ask user for orientation
        SketchOrientationDialog Dlg;

        if (Dlg.exec() != QDialog::Accepted)
            return; // canceled
        Base::Vector3d p = Dlg.Pos.getPosition();
        Base::Rotation r = Dlg.Pos.getRotation();

        // do the right view direction
        std::string camstring;
        switch(Dlg.DirType){
            case 0:
                camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA \\n position 0 0 87 \\n orientation 0 0 1  0 \\n nearDistance -112.88701 \\n farDistance 287.28702 \\n aspectRatio 1 \\n focalDistance 87 \\n height 143.52005 }";
                break;
            case 1:
                camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA \\n position 0 0 -87 \\n orientation -1 0 0  3.1415927 \\n nearDistance -112.88701 \\n farDistance 287.28702 \\n aspectRatio 1 \\n focalDistance 87 \\n height 143.52005 }";
                break;
            case 2:
                camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA\\n  position 0 -87 0 \\n  orientation -1 0 0  4.712389\\n  nearDistance -112.88701\\n  farDistance 287.28702\\n  aspectRatio 1\\n  focalDistance 87\\n  height 143.52005\\n\\n}";
                break;
            case 3:
                camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA\\n  position 0 87 0 \\n  orientation 0 0.70710683 0.70710683  3.1415927\\n  nearDistance -112.88701\\n  farDistance 287.28702\\n  aspectRatio 1\\n  focalDistance 87\\n  height 143.52005\\n\\n}";
                break;
            case 4:
                camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA\\n  position 87 0 0 \\n  orientation 0.57735026 0.57735026 0.57735026  2.0943952 \\n  nearDistance -112.887\\n  farDistance 287.28699\\n  aspectRatio 1\\n  focalDistance 87\\n  height 143.52005\\n\\n}";
                break;
            case 5:
                camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA\\n  position -87 0 0 \\n  orientation -0.57735026 0.57735026 0.57735026  4.1887903 \\n  nearDistance -112.887\\n  farDistance 287.28699\\n  aspectRatio 1\\n  focalDistance 87\\n  height 143.52005\\n\\n}";
                break;
        }
        std::string FeatName = getUniqueObjectName("Sketch");

        openCommand("Create a new Sketch");
        doCommand(Doc,"App.activeDocument().addObject('Sketcher::SketchObject','%s')",FeatName.c_str());
        doCommand(Doc,"App.activeDocument().%s.Placement = App.Placement(App.Vector(%f,%f,%f),App.Rotation(%f,%f,%f,%f))",FeatName.c_str(),p.x,p.y,p.z,r[0],r[1],r[2],r[3]);
        doCommand(Doc,"App.activeDocument().%s.MapMode = \"%s\"",FeatName.c_str(),AttachEngine::getModeName(Attacher::mmDeactivated).c_str());
        doCommand(Gui,"Gui.activeDocument().activeView().setCamera('%s')",camstring.c_str());
        doCommand(Gui,"Gui.activeDocument().setEdit('%s')",FeatName.c_str());
    }

}