/**
 * Function SetTrackSegmentWidth
 *  Modify one track segment width or one via diameter and drill (using DRC control).
 *  Basic routine used by other routines when editing tracks or vias
 * @param aTrackItem = the track segment or via to modify
 * @param aItemsListPicker = the list picker to use for an undo command (can be NULL)
 * @param aUseNetclassValue = true to use NetClass value, false to use BOARD::m_designSettings value
 * @return  true if done, false if no not change (because DRC error)
 */
bool PCB_EDIT_FRAME::SetTrackSegmentWidth( TRACK*             aTrackItem,
                                           PICKED_ITEMS_LIST* aItemsListPicker,
                                           bool               aUseNetclassValue )
{
    int           initial_width, new_width;
    int           initial_drill = -1,new_drill = -1;
    bool          change_ok = false;
    NETINFO_ITEM* net = NULL;

    if( aUseNetclassValue )
        net = aTrackItem->GetNet();

    initial_width = aTrackItem->GetWidth();

    if( net )
        new_width = net->GetTrackWidth();
    else
        new_width = GetDesignSettings().GetCurrentTrackWidth();

    if( aTrackItem->Type() == PCB_VIA_T )
    {
        const VIA *via = static_cast<const VIA *>( aTrackItem );

        if( !via->IsDrillDefault() )
            initial_drill = via->GetDrillValue();

        if( net )
        {
            new_width = net->GetViaSize();
        }
        else
        {
            new_width = GetDesignSettings().GetCurrentViaSize();
            new_drill = GetDesignSettings().GetCurrentViaDrill();
        }

        if( via->GetViaType() == VIA_MICROVIA )
        {
            if( net )
                new_width = net->GetMicroViaSize();
            else
                new_width = GetDesignSettings().GetCurrentMicroViaSize();
        }
    }

    aTrackItem->SetWidth( new_width );

    // make a DRC test because the new size is bigger than the old size
    if( initial_width < new_width )
    {
        int diagdrc = OK_DRC;

        if( g_Drc_On )
            diagdrc = m_drc->Drc( aTrackItem, GetBoard()->m_Track );

        if( diagdrc == OK_DRC )
            change_ok = true;
    }
    else if( initial_width > new_width )
    {
        change_ok = true;
    }
    else if( (aTrackItem->Type() == PCB_VIA_T) && (initial_drill != new_drill) )
    {
        // if new width == initial_width: do nothing, unless a via has its drill value changed
        change_ok = true;
    }

    if( change_ok )
    {
        OnModify();

        if( aItemsListPicker )
        {
            aTrackItem->SetWidth( initial_width );
            ITEM_PICKER picker( aTrackItem, UR_CHANGED );
            picker.SetLink( aTrackItem->Clone() );
            aItemsListPicker->PushItem( picker );
            aTrackItem->SetWidth( new_width );

            if( aTrackItem->Type() == PCB_VIA_T )
            {
                // Set new drill value. Note: currently microvias have only a default drill value
                VIA *via = static_cast<VIA *>( aTrackItem );
                if( new_drill > 0 )
                    via->SetDrill( new_drill );
                else
                    via->SetDrillDefault();
            }
        }
    }
    else
    {
        aTrackItem->SetWidth( initial_width );
    }

    return change_ok;
}
Ejemplo n.º 2
0
bool DIALOG_TRACK_VIA_PROPERTIES::Apply( COMMIT& aCommit )
{
    if( !check() )
        return false;

    bool changeLock = m_lockedCbox->Get3StateValue() != wxCHK_UNDETERMINED;
    bool setLock = m_lockedCbox->Get3StateValue() == wxCHK_CHECKED;

    for( auto item : m_items )
    {
        aCommit.Modify( item );

        switch( item->Type() )
        {
            case PCB_TRACE_T:
            {
                assert( m_tracks );
                TRACK* t = static_cast<TRACK*>( item );

                if( m_trackStartX.Valid() || m_trackStartY.Valid() )
                {
                    wxPoint start = t->GetStart();

                    if( m_trackStartX.Valid() )
                        start.x = m_trackStartX.GetValue();

                    if( m_trackStartY.Valid() )
                        start.y = m_trackStartY.GetValue();

                    t->SetStart( start );
                }

                if( m_trackEndX.Valid() || m_trackEndY.Valid() )
                {
                    wxPoint end = t->GetEnd();

                    if( m_trackEndX.Valid() )
                        end.x = m_trackEndX.GetValue();

                    if( m_trackEndY.Valid() )
                        end.y = m_trackEndY.GetValue();

                    t->SetEnd( end );
                }

                if( m_trackNetclass->IsChecked() )
                {
                    t->SetWidth( t->GetNetClass()->GetTrackWidth() );
                }
                else if( m_trackWidth.Valid() )
                {
                    t->SetWidth( m_trackWidth.GetValue() );
                }

                LAYER_NUM layer = m_TrackLayerCtrl->GetLayerSelection();

                if( layer != UNDEFINED_LAYER )
                    t->SetLayer( (LAYER_ID) layer );

                if( changeLock )
                    t->SetLocked( setLock );

                break;
            }

            case PCB_VIA_T:
            {
                assert( m_vias );

                VIA* v = static_cast<VIA*>( item );

                if( m_viaX.Valid() || m_viaY.Valid() )
                {
                    wxPoint pos = v->GetPosition();

                    if( m_viaX.Valid() )
                        pos.x = m_viaX.GetValue();

                    if( m_viaY.Valid() )
                        pos.y = m_viaY.GetValue();

                    v->SetPosition( pos );
                }

                if( m_viaNetclass->IsChecked() )
                {
                    switch( v->GetViaType() )
                    {
                    default:
                        wxFAIL_MSG("Unhandled via type");
                        // fall through

                    case VIA_THROUGH:
                    case VIA_BLIND_BURIED:
                        v->SetWidth( v->GetNetClass()->GetViaDiameter() );
                        v->SetDrill( v->GetNetClass()->GetViaDrill() );
                        break;

                    case VIA_MICROVIA:
                        v->SetWidth( v->GetNetClass()->GetuViaDiameter() );
                        v->SetDrill( v->GetNetClass()->GetuViaDrill() );
                        break;
                    }
                }
                else
                {
                    if( m_viaDiameter.Valid() )
                        v->SetWidth( m_viaDiameter.GetValue() );

                    if( m_viaDrill.Valid() )
                        v->SetDrill( m_viaDrill.GetValue() );
                }

                if( changeLock )
                    v->SetLocked( setLock );

                break;
            }

            default:
                assert( false );
                break;
        }
    }

    return true;
}
bool PCB_EDIT_FRAME::Other_Layer_Route( TRACK* aTrack, wxDC* DC )
{
    unsigned    itmp;

    if( aTrack == NULL )
    {
        if( GetActiveLayer() != GetScreen()->m_Route_Layer_TOP )
            SetActiveLayer( GetScreen()->m_Route_Layer_TOP );
        else
            SetActiveLayer( GetScreen()->m_Route_Layer_BOTTOM );

        UpdateStatusBar();
        return true;
    }

    // Avoid more than one via on the current location:
    if( GetBoard()->GetViaByPosition( g_CurrentTrackSegment->GetEnd(),
                                      g_CurrentTrackSegment->GetLayer() ) )
        return false;

    for( TRACK* segm = g_FirstTrackSegment;  segm;  segm = segm->Next() )
    {
        if( segm->Type() == PCB_VIA_T && g_CurrentTrackSegment->GetEnd() == segm->GetStart() )
            return false;
    }

    // Is the current segment Ok (no DRC error) ?
    if( g_Drc_On )
    {
        if( BAD_DRC==m_drc->Drc( g_CurrentTrackSegment, GetBoard()->m_Track ) )
            // DRC error, the change layer is not made
            return false;

        // Handle 2 segments.
        if( g_TwoSegmentTrackBuild && g_CurrentTrackSegment->Back() )
        {
            if( BAD_DRC == m_drc->Drc( g_CurrentTrackSegment->Back(), GetBoard()->m_Track ) )
                return false;
        }
    }

    /* Save current state before placing a via.
     * If the via cannot be placed this current state will be reused
     */
    itmp = g_CurrentTrackList.GetCount();
    Begin_Route( g_CurrentTrackSegment, DC );

    m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );

    // create the via
    VIA* via = new VIA( GetBoard() );
    via->SetFlags( IS_NEW );
    via->SetViaType( GetDesignSettings().m_CurrentViaType );
    via->SetNetCode( GetBoard()->GetHighLightNetCode() );
    via->SetPosition( g_CurrentTrackSegment->GetEnd() );

    // for microvias, the size and hole will be changed later.
    via->SetWidth( GetDesignSettings().GetCurrentViaSize());
    via->SetDrill( GetDesignSettings().GetCurrentViaDrill() );

    // Usual via is from copper to component.
    // layer pair is B_Cu and F_Cu.
    via->SetLayerPair( B_Cu, F_Cu );

    LAYER_ID first_layer = GetActiveLayer();
    LAYER_ID last_layer;

    // prepare switch to new active layer:
    if( first_layer != GetScreen()->m_Route_Layer_TOP )
        last_layer = GetScreen()->m_Route_Layer_TOP;
    else
        last_layer = GetScreen()->m_Route_Layer_BOTTOM;

    // Adjust the actual via layer pair
    switch( via->GetViaType() )
    {
    case VIA_BLIND_BURIED:
        via->SetLayerPair( first_layer, last_layer );
        break;

    case VIA_MICROVIA:  // from external to the near neighbor inner layer
        {
            LAYER_ID last_inner_layer = ToLAYER_ID( ( GetBoard()->GetCopperLayerCount() - 2 ) );

            if( first_layer == B_Cu )
                last_layer = last_inner_layer;
            else if( first_layer == F_Cu )
                last_layer = In1_Cu;
            else if( first_layer == last_inner_layer )
                last_layer = B_Cu;
            else if( first_layer == In1_Cu )
                last_layer = F_Cu;
            // else error: will be removed later
            via->SetLayerPair( first_layer, last_layer );

            // Update diameter and hole size, which where set previously
            // for normal vias
            NETINFO_ITEM* net = via->GetNet();
            via->SetWidth( net->GetMicroViaSize() );
            via->SetDrill( net->GetMicroViaDrillSize() );
        }
        break;

    default:
        break;
    }

    if( g_Drc_On && BAD_DRC == m_drc->Drc( via, GetBoard()->m_Track ) )
    {
        // DRC fault: the Via cannot be placed here ...
        delete via;

        m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );

        // delete the track(s) added in Begin_Route()
        while( g_CurrentTrackList.GetCount() > itmp )
        {
            Delete_Segment( DC, g_CurrentTrackSegment );
        }

         SetCurItem( g_CurrentTrackSegment, false );

        // Refresh DRC diag, erased by previous calls
        if( m_drc->GetCurrentMarker() )
            SetMsgPanel( m_drc->GetCurrentMarker() );

        return false;
    }

    SetActiveLayer( last_layer );

    TRACK*  lastNonVia = g_CurrentTrackSegment;

    /* A new via was created. It was Ok.
     */
    g_CurrentTrackList.PushBack( via );

    /* The via is now in linked list and we need a new track segment
     * after the via, starting at via location.
     * it will become the new current segment (from via to the mouse cursor)
     */

    TRACK* track = (TRACK*)lastNonVia->Clone();

    /* the above creates a new segment from the last entered segment, with the
     * current width, flags, netcode, etc... values.
     * layer, start and end point are not correct,
     * and will be modified next
     */

    // set the layer to the new value
    track->SetLayer( GetActiveLayer() );

    /* the start point is the via position and the end point is the cursor
     * which also is on the via (will change when moving mouse)
     */
    track->SetEnd( via->GetStart() );
    track->SetStart( via->GetStart() );

    g_CurrentTrackList.PushBack( track );

    if( g_TwoSegmentTrackBuild )
    {
        // Create a second segment (we must have 2 track segments to adjust)
        g_CurrentTrackList.PushBack( (TRACK*)g_CurrentTrackSegment->Clone() );
    }

    m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );
    SetMsgPanel( via );
    UpdateStatusBar();

    return true;
}
void BOARD_ITEM::SwapData( BOARD_ITEM* aImage )
{
    if( aImage == NULL )
    {
        return;
    }

    EDA_ITEM * pnext = Next();
    EDA_ITEM * pback = Back();

    switch( Type() )
    {
    case PCB_MODULE_T:
    {
        MODULE* tmp = (MODULE*) aImage->Clone();
        ( (MODULE*) aImage )->Copy( (MODULE*) this );
        ( (MODULE*) this )->Copy( tmp );
        delete tmp;
    }
        break;

    case PCB_ZONE_AREA_T:
    {
        ZONE_CONTAINER* tmp = (ZONE_CONTAINER*) aImage->Clone();
        ( (ZONE_CONTAINER*) aImage )->Copy( (ZONE_CONTAINER*) this );
        ( (ZONE_CONTAINER*) this )->Copy( tmp );
        delete tmp;
    }
        break;

    case PCB_LINE_T:
        std::swap( *((DRAWSEGMENT*)this), *((DRAWSEGMENT*)aImage) );
        break;

    case PCB_TRACE_T:
    case PCB_VIA_T:
    {
        TRACK* track = (TRACK*) this;
        TRACK* image = (TRACK*) aImage;

        EXCHG(track->m_Layer, image->m_Layer );

        // swap start, end, width and shape for track and image.
        wxPoint exchp = track->GetStart();
        track->SetStart( image->GetStart() );
        image->SetStart( exchp );
        exchp = track->GetEnd();
        track->SetEnd( image->GetEnd() );
        image->SetEnd( exchp );

        int atmp = track->GetWidth();
        track->SetWidth( image->GetWidth() );
        image->SetWidth( atmp );

        if( Type() == PCB_VIA_T )
        {
            VIA *via = static_cast<VIA*>( this );
            VIA *viaimage = static_cast<VIA*>( aImage );

            VIATYPE_T viatmp = via->GetViaType();
            via->SetViaType( viaimage->GetViaType() );
            viaimage->SetViaType( viatmp );

            int drilltmp = via->GetDrillValue();

            if( via->IsDrillDefault() )
                drilltmp = -1;

            int itmp = viaimage->GetDrillValue();

            if( viaimage->IsDrillDefault() )
                itmp = -1;

            EXCHG(itmp, drilltmp );

            if( drilltmp > 0 )
                via->SetDrill( drilltmp );
            else
                via->SetDrillDefault();

            if( itmp > 0 )
                viaimage->SetDrill( itmp );
            else
                viaimage->SetDrillDefault();
        }
    }
        break;

    case PCB_TEXT_T:
        std::swap( *((TEXTE_PCB*)this), *((TEXTE_PCB*)aImage) );
        break;

    case PCB_TARGET_T:
        std::swap( *((PCB_TARGET*)this), *((PCB_TARGET*)aImage) );
        break;

    case PCB_DIMENSION_T:
        std::swap( *((DIMENSION*)this), *((DIMENSION*)aImage) );
        break;

    case PCB_ZONE_T:
    default:
        wxLogMessage( wxT( "SwapData() error: unexpected type %d" ), Type() );
        break;
    }

    if( pnext != Next() || pback != Back() )
    {
        Pnext = pnext;
        Pback = pback;
#ifdef DEBUG
        wxLogMessage( wxT( "SwapData Error: %s Pnext or Pback pointers modified" ),
                      GetClass().GetData() );
#endif
    }
}
Ejemplo n.º 5
0
void PCB_PAD::AddToBoard()
{
    PCB_PAD_SHAPE*  padShape;
    int             i;
    int             width = 0;
    int             height = 0;

    if( m_objType == wxT( 'V' ) ) // via
    {
        // choose one of the shapes
        for( i = 0; i < (int) m_shapes.GetCount(); i++ )
        {
            padShape = m_shapes[i];

            if( padShape->m_width > 0 && padShape->m_height > 0 )
            {
                if( padShape->m_KiCadLayer == F_Cu
                    || padShape->m_KiCadLayer == B_Cu )
                {
                    width = padShape->m_width;
                    height = padShape->m_height;

                    break;
                }
            }
        }

        if( width == 0 || height == 0 )
            THROW_IO_ERROR( wxT( "pad or via with zero size" ) );

        if( IsCopperLayer( m_KiCadLayer ) )
        {
            VIA* via = new VIA( m_board );
            m_board->m_Track.Append( via );

            via->SetTimeStamp( 0 );

            via->SetPosition( wxPoint( m_positionX, m_positionY ) );
            via->SetEnd( wxPoint( m_positionX, m_positionY ) );

            via->SetWidth( height );
            via->SetViaType( VIA_THROUGH );
            via->SetLayerPair( F_Cu, B_Cu );
            via->SetDrill( m_hole );

            via->SetLayer( m_KiCadLayer );
            via->SetNetCode( m_netCode );
        }
    }
    else // pad
    {
        MODULE* module = new MODULE( m_board );
        m_board->Add( module, ADD_APPEND );

        m_name.text = m_defaultPinDes;

        module->SetPosition( wxPoint( m_positionX, m_positionY ) );
        AddToModule( module, 0, true );

    }
}
void BOARD_ITEM::SwapData( BOARD_ITEM* aImage )
{
    if( aImage == NULL )
        return;

    // Remark: to create images of edited items to undo, we are using Clone method
    // which can duplication of items foe copy, but does not clone all members
    // mainly pointers in chain and time stamp, which is set to new, unique value.
    // So we have to use the current values of these parameters.

    EDA_ITEM * pnext = Next();
    EDA_ITEM * pback = Back();
    DHEAD* mylist    = m_List;
    time_t timestamp = GetTimeStamp();

    switch( Type() )
    {
    case PCB_MODULE_T:
    {
        MODULE* tmp = (MODULE*) aImage->Clone();
        ( (MODULE*) aImage )->Copy( (MODULE*) this );
        ( (MODULE*) this )->Copy( tmp );
        delete tmp;
    }
        break;

    case PCB_ZONE_AREA_T:
    {
        ZONE_CONTAINER* tmp = (ZONE_CONTAINER*) aImage->Clone();
        ( (ZONE_CONTAINER*) aImage )->Copy( (ZONE_CONTAINER*) this );
        ( (ZONE_CONTAINER*) this )->Copy( tmp );
        delete tmp;
    }
        break;

    case PCB_LINE_T:
        std::swap( *((DRAWSEGMENT*)this), *((DRAWSEGMENT*)aImage) );
        break;

    case PCB_TRACE_T:
    case PCB_VIA_T:
    {
        TRACK* track = (TRACK*) this;
        TRACK* image = (TRACK*) aImage;

        std::swap(track->m_Layer, image->m_Layer );

        // swap start, end, width and shape for track and image.
        wxPoint exchp = track->GetStart();
        track->SetStart( image->GetStart() );
        image->SetStart( exchp );
        exchp = track->GetEnd();
        track->SetEnd( image->GetEnd() );
        image->SetEnd( exchp );

        int atmp = track->GetWidth();
        track->SetWidth( image->GetWidth() );
        image->SetWidth( atmp );

        if( Type() == PCB_VIA_T )
        {
            VIA *via = static_cast<VIA*>( this );
            VIA *viaimage = static_cast<VIA*>( aImage );

            VIATYPE_T viatmp = via->GetViaType();
            via->SetViaType( viaimage->GetViaType() );
            viaimage->SetViaType( viatmp );

            int drilltmp = via->GetDrillValue();

            if( via->IsDrillDefault() )
                drilltmp = -1;

            int itmp = viaimage->GetDrillValue();

            if( viaimage->IsDrillDefault() )
                itmp = -1;

            std::swap(itmp, drilltmp );

            if( drilltmp > 0 )
                via->SetDrill( drilltmp );
            else
                via->SetDrillDefault();

            if( itmp > 0 )
                viaimage->SetDrill( itmp );
            else
                viaimage->SetDrillDefault();
        }
    }
        break;

    case PCB_TEXT_T:
        std::swap( *((TEXTE_PCB*)this), *((TEXTE_PCB*)aImage) );
        break;

    case PCB_TARGET_T:
        std::swap( *((PCB_TARGET*)this), *((PCB_TARGET*)aImage) );
        break;

    case PCB_DIMENSION_T:
        std::swap( *((DIMENSION*)this), *((DIMENSION*)aImage) );
        break;

    case PCB_ZONE_T:
    default:
        wxLogMessage( wxT( "SwapData() error: unexpected type %d" ), Type() );
        break;
    }

    // Restore pointers and time stamp, to be sure they are not broken
    Pnext = pnext;
    Pback = pback;
    m_List = mylist;
    SetTimeStamp( timestamp );
}
bool DIALOG_TRACK_VIA_PROPERTIES::TransferDataFromWindow()
{
    auto connectivity = m_frame->GetBoard()->GetConnectivity();
    int newNetCode = m_netSelector->GetSelectedNetcode();
    std::vector<D_PAD*> changingPads;

    if ( !m_netSelector->IsIndeterminate() )
    {
        std::set<D_PAD*> connectedPads;

        for( auto& item : m_items )
        {
            const KICAD_T ourTypes[] = { PCB_TRACE_T, PCB_PAD_T, PCB_VIA_T, PCB_MODULE_T, EOT };
            auto connectedItems = connectivity->GetConnectedItems( static_cast<BOARD_CONNECTED_ITEM*>( item ), ourTypes, true );
            for ( auto citem : connectedItems )
            {
                if( citem->Type() == PCB_PAD_T )
                {
                    connectedPads.insert( static_cast<D_PAD*>( citem ) );
                }
            }
        }

        for( D_PAD* pad : connectedPads )
        {
            if( pad->GetNetCode() != newNetCode )
                changingPads.push_back( pad );
        }
    }

    // Run validations:

    if( changingPads.size() )
    {
        if( !confirmPadChange( changingPads ) )
            return false;
    }

    if( m_vias )
    {
        if( !m_viaDiameter.Validate( GEOMETRY_MIN_SIZE, INT_MAX )
            || !m_viaDrill.Validate( GEOMETRY_MIN_SIZE, INT_MAX ) )
            return false;

        if( m_ViaDiameterCtrl->IsEnabled() && !m_viaDiameter.IsIndeterminate()
            && m_ViaDrillCtrl->IsEnabled() && !m_viaDrill.IsIndeterminate()
            && m_viaDiameter.GetValue() <= m_viaDrill.GetValue() )
        {
            DisplayError( GetParent(), _( "Via drill size must be smaller than via diameter" ) );
            m_ViaDrillCtrl->SelectAll();
            m_ViaDrillCtrl->SetFocus();
            return false;
        }

        if( m_ViaStartLayer->GetLayerSelection() != UNDEFINED_LAYER &&
            m_ViaStartLayer->GetLayerSelection() == m_ViaEndLayer->GetLayerSelection() )
        {
            DisplayError( GetParent(), _( "Via start layer and end layer cannot be the same" ) );
            return false;
        }
    }

    if( m_tracks )
    {
        if( !m_trackWidth.Validate( GEOMETRY_MIN_SIZE, INT_MAX ) )
            return false;
    }

    // If we survived that, then save the changes:

    bool changeLock = m_lockedCbox->Get3StateValue() != wxCHK_UNDETERMINED;
    bool setLock = m_lockedCbox->Get3StateValue() == wxCHK_CHECKED;

    for( auto item : m_items )
    {
        m_commit.Modify( item );

        switch( item->Type() )
        {
            case PCB_TRACE_T:
            {
                wxASSERT( m_tracks );
                TRACK* t = static_cast<TRACK*>( item );

                if( !m_trackStartX.IsIndeterminate() )
                    t->SetStart( wxPoint( m_trackStartX.GetValue(), t->GetStart().y ) );

                if( !m_trackStartY.IsIndeterminate() )
                    t->SetStart( wxPoint( t->GetStart().x, m_trackStartY.GetValue() ) );

                if( !m_trackEndX.IsIndeterminate() )
                    t->SetEnd( wxPoint( m_trackEndX.GetValue(), t->GetEnd().y ) );

                if( !m_trackEndY.IsIndeterminate() )
                    t->SetEnd( wxPoint( t->GetEnd().x, m_trackEndY.GetValue() ) );

                if( m_trackNetclass->IsChecked() )
                    t->SetWidth( t->GetNetClass()->GetTrackWidth() );
                else if( !m_trackWidth.IsIndeterminate() )
                    t->SetWidth( m_trackWidth.GetValue() );

                LAYER_NUM layer = m_TrackLayerCtrl->GetLayerSelection();

                if( layer != UNDEFINED_LAYER )
                    t->SetLayer( (PCB_LAYER_ID) layer );

                if( changeLock )
                    t->SetLocked( setLock );

                if ( !m_netSelector->IsIndeterminate() )
                    t->SetNetCode( m_netSelector->GetSelectedNetcode() );

                break;
            }

            case PCB_VIA_T:
            {
                wxASSERT( m_vias );
                VIA* v = static_cast<VIA*>( item );

                if( !m_viaX.IsIndeterminate() )
                    v->SetPosition( wxPoint( m_viaX.GetValue(), v->GetPosition().y ) );

                if( !m_viaY.IsIndeterminate() )
                    v->SetPosition( wxPoint( v->GetPosition().x, m_viaY.GetValue() ) );

                if( m_ViaTypeChoice->GetSelection() != 3)
                {
                    switch( m_ViaTypeChoice->GetSelection() )
                    {
                    default:
                    case 0: v->SetViaType( VIA_THROUGH ); v->SanitizeLayers(); break;
                    case 1: v->SetViaType( VIA_MICROVIA );                     break;
                    case 2: v->SetViaType( VIA_BLIND_BURIED );                 break;
                    }
                }

                auto startLayer = static_cast<PCB_LAYER_ID>( m_ViaStartLayer->GetLayerSelection() );
                auto endLayer = static_cast<PCB_LAYER_ID>( m_ViaEndLayer->GetLayerSelection() );

                if (startLayer != UNDEFINED_LAYER )
                    v->SetTopLayer( startLayer );

                if (endLayer != UNDEFINED_LAYER )
                    v->SetBottomLayer( endLayer );

                v->SanitizeLayers();

                if( m_viaNetclass->IsChecked() )
                {
                    switch( v->GetViaType() )
                    {
                    default:
                        wxFAIL_MSG("Unhandled via type");
                        // fall through

                    case VIA_THROUGH:
                    case VIA_BLIND_BURIED:
                        v->SetWidth( v->GetNetClass()->GetViaDiameter() );
                        v->SetDrill( v->GetNetClass()->GetViaDrill() );
                        break;

                    case VIA_MICROVIA:
                        v->SetWidth( v->GetNetClass()->GetuViaDiameter() );
                        v->SetDrill( v->GetNetClass()->GetuViaDrill() );
                        break;
                    }
                }
                else
                {
                    if( !m_viaDiameter.IsIndeterminate() )
                        v->SetWidth( m_viaDiameter.GetValue() );

                    if( !m_viaDrill.IsIndeterminate() )
                        v->SetDrill( m_viaDrill.GetValue() );
                }

                if ( !m_netSelector->IsIndeterminate() )
                    v->SetNetCode( m_netSelector->GetSelectedNetcode() );

                if( changeLock )
                    v->SetLocked( setLock );

                break;
            }

            default:
                wxASSERT( false );
                break;
        }
    }

    if ( !m_netSelector->IsIndeterminate() )
    {
        // Commit::Push() will rebuild connectivitiy propagating nets from connected pads
        // outwards.  We therefore have to update the connected pads in order for the net
        // change to "stick".
        for( D_PAD* pad : changingPads )
        {
            m_commit.Modify( pad );
            pad->SetNetCode( m_netSelector->GetSelectedNetcode() );
        }
    }

    m_commit.Push( _( "Edit track/via properties" ) );

    return true;
}
bool DIALOG_TRACK_VIA_PROPERTIES::Apply()
{
    if( !check() )
        return false;

    for( int i = 0; i < m_items.Size(); ++i )
    {
        BOARD_ITEM* item = m_items.Item<BOARD_ITEM>( i );

        switch( item->Type() )
        {
            case PCB_TRACE_T:
            {
                assert( m_tracks );
                TRACK* t = static_cast<TRACK*>( item );

                if( m_trackStartX.Valid() || m_trackStartY.Valid() )
                {
                    wxPoint start = t->GetStart();

                    if( m_trackStartX.Valid() )
                        start.x = m_trackStartX.GetValue();

                    if( m_trackStartY.Valid() )
                        start.y = m_trackStartY.GetValue();

                    t->SetStart( start );
                }

                if( m_trackEndX.Valid() || m_trackEndY.Valid() )
                {
                    wxPoint end = t->GetEnd();

                    if( m_trackEndX.Valid() )
                        end.x = m_trackEndX.GetValue();

                    if( m_trackEndY.Valid() )
                        end.y = m_trackEndY.GetValue();

                    t->SetEnd( end );
                }

                if( m_trackNetclass->IsChecked() )
                {
                    t->SetWidth( t->GetNetClass()->GetTrackWidth() );
                }
                else if( m_trackWidth.Valid() )
                {
                    t->SetWidth( m_trackWidth.GetValue() );
                }

                LAYER_NUM layer = m_TrackLayerCtrl->GetLayerSelection();

                if( layer != UNDEFINED_LAYER )
                    t->SetLayer( (LAYER_ID) layer );

                break;
            }

            case PCB_VIA_T:
            {
                assert( m_vias );

                VIA* v = static_cast<VIA*>( item );

                if( m_viaX.Valid() || m_viaY.Valid() )
                {
                    wxPoint pos = v->GetPosition();

                    if( m_viaX.Valid() )
                        pos.x = m_viaX.GetValue();

                    if( m_viaY.Valid() )
                        pos.y = m_viaY.GetValue();

                    v->SetPosition( pos );
                }

                if( m_viaNetclass->IsChecked() )
                {
                    v->SetWidth( v->GetNetClass()->GetViaDiameter() );
                    v->SetDrill( v->GetNetClass()->GetViaDrill() );
                }
                else
                {
                    if( m_viaDiameter.Valid() )
                        v->SetWidth( m_viaDiameter.GetValue() );

                    if( m_viaDrill.Valid() )
                        v->SetDrill( m_viaDrill.GetValue() );
                }

                break;
            }

            default:
                assert( false );
                break;
        }
    }

    return true;
}
Ejemplo n.º 9
0
int PCB_EDIT_FRAME::SetTrackSegmentWidth( TRACK*             aTrackItem,
                                          PICKED_ITEMS_LIST* aItemsListPicker,
                                          bool               aUseNetclassValue )
{
    int           return_code = TRACK_ACTION_NONE;
    int           initial_width;
    int           new_width;
    int           initial_drill = -1;
    int           new_drill = -1;
    NETINFO_ITEM* net = NULL;

    if( aUseNetclassValue )
        net = aTrackItem->GetNet();

    initial_width = aTrackItem->GetWidth();

    if( net )
        new_width = net->GetTrackWidth();
    else
        new_width = GetDesignSettings().GetCurrentTrackWidth();

    if( aTrackItem->Type() == PCB_VIA_T )
    {
        const VIA *via = static_cast<const VIA *>( aTrackItem );

        // Micro vias have a size only defined in their netclass
        // (no specific values defined by a table of specific value)
        // Ensure the netclass is accessible:
        if( via->GetViaType() == VIA_MICROVIA && net == NULL )
            net = aTrackItem->GetNet();

        // Get the draill value, regardless it is default or specific
        initial_drill = via->GetDrillValue();

        if( net )
        {
            new_width = net->GetViaSize();
            new_drill = net->GetViaDrillSize();
        }
        else
        {
            new_width = GetDesignSettings().GetCurrentViaSize();
            new_drill = GetDesignSettings().GetCurrentViaDrill();
        }

        if( via->GetViaType() == VIA_MICROVIA )
        {
            if( net )
            {
                new_width = net->GetMicroViaSize();
                new_drill = net->GetMicroViaDrillSize();
            }
            else
            {
                // Should not occur
            }
        }

        // Old versions set a drill value <= 0, when the default netclass it used
        // but it could be better to set the drill value to the actual value
        // to avoid issues for existing vias, if the default drill value is modified
        // in the netclass, and not in current vias.
        if( via->GetDrill() <= 0 )      // means default netclass drill value used
        {
            initial_drill  = -1;        // Force drill vias re-initialization
        }
    }

    aTrackItem->SetWidth( new_width );

    // make a DRC test because the new size is bigger than the old size
    if( initial_width < new_width )
    {
        int diagdrc = OK_DRC;
        return_code = TRACK_ACTION_SUCCESS;

        if( Settings().m_legacyDrcOn )
            diagdrc = m_drc->DrcOnCreatingTrack( aTrackItem, GetBoard()->m_Track );

        if( diagdrc != OK_DRC )
            return_code = TRACK_ACTION_DRC_ERROR;
    }
    else if( initial_width > new_width )
    {
        return_code = TRACK_ACTION_SUCCESS;
    }
    else if( (aTrackItem->Type() == PCB_VIA_T) )
    {
        // if a via has its drill value changed, force change
        if( initial_drill != new_drill )
            return_code = TRACK_ACTION_SUCCESS;
    }

    if( return_code == TRACK_ACTION_SUCCESS )
    {
        OnModify();

        if( aItemsListPicker )
        {
            aTrackItem->SetWidth( initial_width );
            ITEM_PICKER picker( aTrackItem, UR_CHANGED );
            picker.SetLink( aTrackItem->Clone() );
            aItemsListPicker->PushItem( picker );
            aTrackItem->SetWidth( new_width );

            if( aTrackItem->Type() == PCB_VIA_T )
            {
                // Set new drill value. Note: currently microvias have only a default drill value
                VIA *via = static_cast<VIA *>( aTrackItem );
                if( new_drill > 0 )
                    via->SetDrill( new_drill );
                else
                    via->SetDrillDefault();
            }
        }
    }
    else
    {
        aTrackItem->SetWidth( initial_width );
    }

    return return_code;
}
bool PCB_EDIT_FRAME::SetTrackSegmentWidth( TRACK*             aTrackItem,
                                           PICKED_ITEMS_LIST* aItemsListPicker,
                                           bool               aUseNetclassValue )
{
    /* Modify one track segment width or one via diameter and drill (using DRC control).
     * Basic function used by other routines when editing tracks or vias
     * aTrackItem = the track segment or via to modify
     * aItemsListPicker = the list picker to use for an undo command (can be NULL)
     * aUseNetclassValue = true to use NetClass value, false to use BOARD::m_designSettings value
     * return  true if done, false if no not change (due to DRC error)
     */
    int           initial_width, new_width;
    int           initial_drill = -1,new_drill = -1;
    bool          change_ok = false;
    NETINFO_ITEM* net = NULL;

    if( aUseNetclassValue )
        net = aTrackItem->GetNet();

    initial_width = aTrackItem->GetWidth();

    if( net )
        new_width = net->GetTrackWidth();
    else
        new_width = GetDesignSettings().GetCurrentTrackWidth();

    if( aTrackItem->Type() == PCB_VIA_T )
    {
        const VIA *via = static_cast<const VIA *>( aTrackItem );

        // Micro vias have a size only defined in their netclass
        // (no specific values defined by a table of specific value)
        // Ensure the netclass is accessible:
        if( via->GetViaType() == VIA_MICROVIA && net == NULL )
            net = aTrackItem->GetNet();

        // Get the draill value, regardless it is default or specific
        initial_drill = via->GetDrillValue();

        if( net )
        {
            new_width = net->GetViaSize();
            new_drill = net->GetViaDrillSize();
        }
        else
        {
            new_width = GetDesignSettings().GetCurrentViaSize();
            new_drill = GetDesignSettings().GetCurrentViaDrill();
        }

        if( via->GetViaType() == VIA_MICROVIA )
        {
            if( net )
            {
                new_width = net->GetMicroViaSize();
                new_drill = net->GetMicroViaDrillSize();
            }
            else
            {
                // Should not occur
            }
        }

        // Old versions set a drill value <= 0, when the default netclass it used
        // but it could be better to set the drill value to the actual value
        // to avoid issues for existing vias, if the default drill value is modified
        // in the netclass, and not in current vias.
        if( via->GetDrill() <= 0 )      // means default netclass drill value used
        {
            initial_drill  = -1;        // Force drill vias re-initialization
        }
    }

    aTrackItem->SetWidth( new_width );

    // make a DRC test because the new size is bigger than the old size
    if( initial_width < new_width )
    {
        int diagdrc = OK_DRC;

        if( g_Drc_On )
            diagdrc = m_drc->Drc( aTrackItem, GetBoard()->m_Track );

        if( diagdrc == OK_DRC )
            change_ok = true;
    }
    else if( initial_width > new_width )
    {
        change_ok = true;
    }
    else if( (aTrackItem->Type() == PCB_VIA_T) )
    {
        // if a via has its drill value changed, force change
        if( initial_drill != new_drill )
            change_ok = true;
    }

    if( change_ok )
    {
        OnModify();

        if( aItemsListPicker )
        {
            aTrackItem->SetWidth( initial_width );
            ITEM_PICKER picker( aTrackItem, UR_CHANGED );
            picker.SetLink( aTrackItem->Clone() );
            aItemsListPicker->PushItem( picker );
            aTrackItem->SetWidth( new_width );

            if( aTrackItem->Type() == PCB_VIA_T )
            {
                // Set new drill value. Note: currently microvias have only a default drill value
                VIA *via = static_cast<VIA *>( aTrackItem );
                if( new_drill > 0 )
                    via->SetDrill( new_drill );
                else
                    via->SetDrillDefault();
            }
        }
    }
    else
    {
        aTrackItem->SetWidth( initial_width );
    }

    return change_ok;
}