Ejemplo n.º 1
0
static void export_vrml_zones( MODEL_VRML& aModel, BOARD* aPcb )
{

    double scale = aModel.scale;
    double x, y;

    for( int ii = 0; ii < aPcb->GetAreaCount(); ii++ )
    {
        ZONE_CONTAINER* zone = aPcb->GetArea( ii );

        VRML_LAYER* vl;

        if( !GetLayer( aModel, zone->GetLayer(), &vl ) )
            continue;

        if( !zone->IsFilled() )
        {
            zone->SetFillMode( 0 ); // use filled polygons
            zone->BuildFilledSolidAreasPolygons( aPcb );
        }
        const CPOLYGONS_LIST& poly = zone->GetFilledPolysList();

        int nvert = poly.GetCornersCount();
        int i = 0;

        while( i < nvert )
        {
            int seg = vl->NewContour();
            bool first = true;

            if( seg < 0 )
                break;

            while( i < nvert )
            {
                x = poly.GetX(i) * scale;
                y = -(poly.GetY(i) * scale);

                if( poly.IsEndContour(i) )
                    break;

                if( !vl->AddVertex( seg, x, y ) )
                    throw( std::runtime_error( vl->GetError() ) );

                ++i;
            }

            // KiCad ensures that the first polygon is the outline
            // and all others are holes
             vl->EnsureWinding( seg, first ? false : true );

            if( first )
                first = false;

            ++i;
        }
    }
}
Ejemplo n.º 2
0
void ZONE_FILLER::Fill( std::vector<ZONE_CONTAINER*> aZones )
{
    std::vector<CN_ZONE_ISOLATED_ISLAND_LIST> toFill;
    auto connectivity = m_board->GetConnectivity();

    connectivity->Lock();

    // Remove segment zones
    m_board->m_Zone.DeleteAll();

    for( auto zone : aZones )
    {
        // Keepout zones are not filled
        if( zone->GetIsKeepout() )
            continue;

        CN_ZONE_ISOLATED_ISLAND_LIST l;
        l.m_zone = zone;
        toFill.push_back( l );
    }

    for( unsigned i = 0; i < toFill.size(); i++ )
    {
        if( m_commit )
        {
            m_commit->Modify( toFill[i].m_zone );
        }
    }

    if( m_progressReporter )
    {
        m_progressReporter->Report( _( "Calculating zone fills..." ) );
        m_progressReporter->SetMaxProgress( toFill.size() );
    }


    #ifdef USE_OPENMP
        #pragma omp parallel
    #endif
    {
        #ifdef USE_OPENMP
            #pragma omp master
            if( m_progressReporter )
            {
                m_progressReporter->KeepRefreshing( true );
            }
        #endif

        #ifdef USE_OPENMP
            #pragma omp for schedule(dynamic)
        #endif
        for( unsigned i = 0; i < toFill.size(); i++ )
        {
            SHAPE_POLY_SET rawPolys, finalPolys;
            ZONE_SEGMENT_FILL segFill;
            fillSingleZone( toFill[i].m_zone, rawPolys, finalPolys );

            toFill[i].m_zone->SetRawPolysList( rawPolys );
            toFill[i].m_zone->SetFilledPolysList( finalPolys );
            toFill[i].m_zone->SetIsFilled( true );

            if( m_progressReporter )
            {
                m_progressReporter->AdvanceProgress();
            }
        }
    }

    // Now remove insulated copper islands
    if( m_progressReporter )
    {
        m_progressReporter->AdvancePhase();
        m_progressReporter->Report( _( "Removing insulated copper islands..." ) );
    }

    connectivity->SetProgressReporter( m_progressReporter );
    connectivity->FindIsolatedCopperIslands( toFill );

    for( auto& zone : toFill )
    {
        std::sort( zone.m_islands.begin(), zone.m_islands.end(), std::greater<int>() );
        SHAPE_POLY_SET poly = zone.m_zone->GetFilledPolysList();

        for( auto idx : zone.m_islands )
        {
            poly.DeletePolygon( idx );
        }

        zone.m_zone->SetFilledPolysList( poly );
    }

    if( m_progressReporter )
    {
        m_progressReporter->AdvancePhase();
        m_progressReporter->Report( _( "Caching polygon triangulations..." ) );
        m_progressReporter->SetMaxProgress( toFill.size() );
    }
    #ifdef USE_OPENMP
        #pragma omp parallel
    #endif
    {
        #ifdef USE_OPENMP
            #pragma omp master
            if( m_progressReporter )
            {
                m_progressReporter->KeepRefreshing( true );
            }
        #endif

        #ifdef USE_OPENMP
            #pragma omp for schedule(dynamic)
        #endif
        for( unsigned i = 0; i < toFill.size(); i++ )
        {
            if( m_progressReporter )
            {
                m_progressReporter->AdvanceProgress();
            }

            toFill[i].m_zone->CacheTriangulation();
        }
    }

    // If some zones must be filled by segments, create the filling segments
    // (note, this is a outdated option, but it exists)
    int zones_to_fill_count = 0;

    for( unsigned i = 0; i < toFill.size(); i++ )
    {
        if( toFill[i].m_zone->GetFillMode() == ZFM_SEGMENTS )
            zones_to_fill_count++;
    }

    if( zones_to_fill_count )
    {
        if( m_progressReporter )
        {
            m_progressReporter->AdvancePhase();
            m_progressReporter->Report( _( "Fill with segments..." ) );
            m_progressReporter->SetMaxProgress( zones_to_fill_count );
        }

        // TODO: use OPENMP to speedup calculations:
        for( unsigned i = 0; i < toFill.size(); i++ )
        {
            ZONE_CONTAINER* zone = toFill[i].m_zone;

            if( zone->GetFillMode() != ZFM_SEGMENTS )
                continue;

            if( m_progressReporter )
            {
                m_progressReporter->AdvanceProgress();
            }

            ZONE_SEGMENT_FILL segFill;

            fillZoneWithSegments( zone, zone->GetFilledPolysList(), segFill );
            toFill[i].m_zone->SetFillSegments( segFill );
        }
    }

    if( m_progressReporter )
    {
        m_progressReporter->AdvancePhase();
        m_progressReporter->Report( _( "Committing changes..." ) );
    }

    connectivity->SetProgressReporter( nullptr );

    if( m_commit )
    {
        m_commit->Push( _( "Fill Zone(s)" ), false );
    }
    else
    {
        for( unsigned i = 0; i < toFill.size(); i++ )
        {
            connectivity->Update( toFill[i].m_zone );
        }

        connectivity->RecalculateRatsnest();
    }

    connectivity->Unlock();
}
/**
 * Function Test_Connection_To_Copper_Areas
 * init .m_ZoneSubnet parameter in tracks and pads according to the connections to areas found
 * @param aNetcode = netcode to analyse. if -1, analyse all nets
 */
void BOARD::Test_Connections_To_Copper_Areas( int aNetcode )
{
    // list of pads and tracks candidates on this layer and on this net.
    // It is static to avoid multiple memory realloc.
    static std::vector <BOARD_CONNECTED_ITEM*> candidates;

    // clear .m_ZoneSubnet parameter for pads
    for( MODULE* module = m_Modules;  module;  module = module->Next() )
    {
        for( D_PAD* pad = module->Pads();  pad;  pad = pad->Next() )
            if( aNetcode < 0 || aNetcode == pad->GetNetCode() )
                pad->SetZoneSubNet( 0 );
    }

    // clear .m_ZoneSubnet parameter for tracks and vias
    for( TRACK* track = m_Track;  track;  track = track->Next() )
    {
        if( aNetcode < 0 || aNetcode == track->GetNetCode() )
            track->SetZoneSubNet( 0 );
    }

    // examine all zones, net by net:
    int subnet = 0;

    // Build zones candidates list
    std::vector<ZONE_CONTAINER*> zones_candidates;

    zones_candidates.reserve( GetAreaCount() );

    for( int index = 0; index < GetAreaCount(); index++ )
    {
        ZONE_CONTAINER* zone = GetArea( index );

        if( !zone->IsOnCopperLayer() )
            continue;

        if( aNetcode >= 0 &&  aNetcode != zone->GetNetCode() )
            continue;

        if( zone->GetFilledPolysList().GetCornersCount() == 0 )
            continue;

        zones_candidates.push_back( zone );
    }

    // sort them by netcode then vertices count.
    // For a given net, examine the smaller zones first slightly speed up calculation
    // (25% faster)
    // this is only noticeable with very large boards and depends on board zones topology
    // This is due to the fact some items are connected by small zones ares,
    // before examining large zones areas and these items are not tested after a connection is found
    sort( zones_candidates.begin(), zones_candidates.end(), sort_areas );

    int oldnetcode = -1;
    for( unsigned idx = 0; idx < zones_candidates.size(); idx++ )
    {
        ZONE_CONTAINER* zone = zones_candidates[idx];

        int netcode = zone->GetNetCode();

        // Build a list of candidates connected to the net:
        // At this point, layers are not considered, because areas on different layers can
        // be connected by a via or a pad.
        // (because zones are sorted by netcode, there is made only once per net)
        NETINFO_ITEM* net = FindNet( netcode );

        wxASSERT( net );
        if( net == NULL )
            continue;

        if( oldnetcode != netcode )
        {
            oldnetcode = netcode;
            candidates.clear();

            // Build the list of pads candidates connected to the net:
            candidates.reserve( net->m_PadInNetList.size() );

            for( unsigned ii = 0; ii < net->m_PadInNetList.size(); ii++ )
                candidates.push_back( net->m_PadInNetList[ii] );

            // Build the list of track candidates connected to the net:
            TRACK* track = m_Track.GetFirst()->GetStartNetCode( netcode );

            for( ; track; track = track->Next() )
            {
                if( track->GetNetCode() != netcode )
                    break;

                candidates.push_back( track );
            }
        }

        // test if a candidate is inside a filled area of this zone
        unsigned indexstart = 0, indexend;
        const CPOLYGONS_LIST& polysList = zone->GetFilledPolysList();

        for( indexend = 0; indexend < polysList.GetCornersCount(); indexend++ )
        {
            // end of a filled sub-area found
            if( polysList.IsEndContour( indexend ) )
            {
                subnet++;
                EDA_RECT bbox = zone->CalculateSubAreaBoundaryBox( indexstart, indexend );

                for( unsigned ic = 0; ic < candidates.size(); ic++ )
                {
                    // test if this area is connected to a board item:
                    BOARD_CONNECTED_ITEM* item = candidates[ic];

                    if( item->GetZoneSubNet() == subnet )   // Already merged
                        continue;

                   if( !item->IsOnLayer( zone->GetLayer() ) )
                        continue;

                    wxPoint pos1, pos2;

                    if( item->Type() == PCB_PAD_T )
                    {
                        // For pads we use the shape position instead of
                        // the pad position, because the zones are connected
                        // to the center of the shape, not the pad position
                        // (this is important for pads with thermal relief)
                        pos1 = pos2 = ( (D_PAD*) item )->ShapePos();
                    }
                    else if( item->Type() == PCB_VIA_T )
                    {
                        const VIA *via = static_cast<const VIA*>( item );
                        pos1 = via->GetStart();
                        pos2 = pos1;
                    }
                    else if( item->Type() == PCB_TRACE_T )
                    {
                        const TRACK *trk = static_cast<const TRACK*>( item );
                        pos1 = trk->GetStart();
                        pos2 = trk->GetEnd();
                    }
                    else
                    {
                        continue;
                    }

                    bool connected = false;

                    if( bbox.Contains( pos1 ) )
                    {
                        if( TestPointInsidePolygon( polysList, indexstart,
                                                    indexend, pos1.x, pos1.y ) )
                            connected = true;
                    }
                    if( !connected && (pos1 != pos2 ) )
                    {
                        if( bbox.Contains( pos2 ) )
                        {
                            if( TestPointInsidePolygon( polysList,
                                                        indexstart, indexend,
                                                        pos2.x, pos2.y ) )
                                connected = true;
                        }
                    }

                    if( connected )
                    {
                        // Set ZoneSubnet to the current subnet value.
                        // If the previous subnet is not 0, merge all items with old subnet
                        // to the new one
                        int old_subnet = item->GetZoneSubNet();
                        item->SetZoneSubNet( subnet );

                        // Merge previous subnet with the current
                        if( (old_subnet > 0) && (old_subnet != subnet) )
                        {
                            for( unsigned jj = 0; jj < candidates.size(); jj++ )
                            {
                                BOARD_CONNECTED_ITEM* item_to_merge = candidates[jj];

                                if( old_subnet == item_to_merge->GetZoneSubNet() )
                                {
                                    item_to_merge->SetZoneSubNet( subnet );
                                }
                            }
                        }   // End if ( old_subnet > 0 )
                    }       // End if( connected )
                }

                // End test candidates for the current filled area
                indexstart = indexend + 1;  // prepare test next area, starting at indexend+1
                                            // (if exists).  End read one area in
                                            // zone->m_FilledPolysList
            }
        } // End read all segments in zone
    } // End read all zones candidates
}