ZONE_CONTAINER::ZONE_CONTAINER( const ZONE_CONTAINER& aZone ) :
BOARD_CONNECTED_ITEM( aZone )
{
// Should the copy be on the same net?
SetNet( aZone.GetNet() );
m_Poly = new CPolyLine( *aZone.m_Poly );
// For corner moving, corner index to drag, or -1 if no selection
m_CornerSelection = -1;
m_IsFilled = aZone.m_IsFilled;
m_ZoneClearance = aZone.m_ZoneClearance; // clearance value
m_ZoneMinThickness = aZone.m_ZoneMinThickness;
m_FillMode = aZone.m_FillMode; // Filling mode (segments/polygons)
m_priority = aZone.m_priority;
m_ArcToSegmentsCount = aZone.m_ArcToSegmentsCount;
m_PadConnection = aZone.m_PadConnection;
m_ThermalReliefGap = aZone.m_ThermalReliefGap;
m_ThermalReliefCopperBridge = aZone.m_ThermalReliefCopperBridge;
m_FilledPolysList.Append( aZone.m_FilledPolysList );
m_FillSegmList = aZone.m_FillSegmList; // vector <> copy
m_isKeepout = aZone.m_isKeepout;
m_doNotAllowCopperPour = aZone.m_doNotAllowCopperPour;
m_doNotAllowVias = aZone.m_doNotAllowVias;
m_doNotAllowTracks = aZone.m_doNotAllowTracks;
m_cornerSmoothingType = aZone.m_cornerSmoothingType;
m_cornerRadius = aZone.m_cornerRadius;
SetLocalFlags( aZone.GetLocalFlags() );
}
void PCB_EDIT_FRAME::duplicateZone( wxDC* aDC, ZONE_CONTAINER* aZone )
{
ZONE_CONTAINER* newZone = new ZONE_CONTAINER( GetBoard() );
newZone->Copy( aZone );
newZone->UnFill();
ZONE_SETTINGS zoneSettings;
zoneSettings << *aZone;
bool success;
if( aZone->GetIsKeepout() )
success = InvokeKeepoutAreaEditor( this, &zoneSettings );
else if( aZone->IsOnCopperLayer() )
success = InvokeCopperZonesEditor( this, &zoneSettings );
else
success = InvokeNonCopperZonesEditor( this, aZone, &zoneSettings );
if( success )
{
zoneSettings.ExportSetting( *newZone );
newZone->m_Poly->Hatch();
s_AuxiliaryList.ClearListAndDeleteItems();
s_PickedList.ClearListAndDeleteItems();
SaveCopyOfZones( s_PickedList, GetBoard(), newZone->GetNet(), newZone->GetLayer() );
GetBoard()->Add( newZone );
ITEM_PICKER picker( newZone, UR_NEW );
s_PickedList.PushItem( picker );
GetScreen()->SetCurItem( NULL ); // This outline may be deleted when merging outlines
// Combine zones if possible
GetBoard()->OnAreaPolygonModified( &s_AuxiliaryList, newZone );
// Redraw zones
GetBoard()->RedrawAreasOutlines( m_canvas, aDC, GR_OR, newZone->GetLayer() );
GetBoard()->RedrawFilledAreas( m_canvas, aDC, GR_OR, newZone->GetLayer() );
if( GetBoard()->GetAreaIndex( newZone ) >= 0
&& GetBoard()->Test_Drc_Areas_Outlines_To_Areas_Outlines( newZone, true ) )
{
DisplayError( this, _( "Duplicate Zone: The outline of the duplicated zone fails DRC check!" ) );
}
UpdateCopyOfZonesList( s_PickedList, s_AuxiliaryList, GetBoard() );
SaveCopyInUndoList( s_PickedList, UR_UNSPECIFIED );
s_PickedList.ClearItemsList();
OnModify();
}
else
delete newZone;
}
bool BOARD_NETLIST_UPDATER::testConnectivity( NETLIST& aNetlist )
{
// Last step: Some tests:
// verify all pads found in netlist:
// They should exist in footprints, otherwise the footprint is wrong
// note also references or time stamps are updated, so we use only
// the reference to find a footprint
//
// Also verify if zones have acceptable nets, i.e. nets with pads.
// Zone with no pad belongs to a "dead" net which happens after changes in schematic
// when no more pad use this net name.
wxString msg;
wxString padname;
for( int i = 0; i < (int) aNetlist.GetCount(); i++ )
{
const COMPONENT* component = aNetlist.GetComponent( i );
MODULE* footprint = m_board->FindModuleByReference( component->GetReference() );
if( footprint == NULL ) // It can be missing in partial designs
continue;
// Explore all pins/pads in component
for( unsigned jj = 0; jj < component->GetNetCount(); jj++ )
{
COMPONENT_NET net = component->GetNet( jj );
padname = net.GetPinName();
if( footprint->FindPadByName( padname ) )
continue; // OK, pad found
// not found: bad footprint, report error
msg.Printf( _( "Component %s pad %s not found in footprint %s\n" ),
GetChars( component->GetReference() ),
GetChars( padname ),
GetChars( footprint->GetFPID().Format() ) );
m_reporter->Report( msg, REPORTER::RPT_ERROR );
++m_errorCount;
}
}
// Test copper zones to detect "dead" nets (nets without any pad):
for( int i = 0; i < m_board->GetAreaCount(); i++ )
{
ZONE_CONTAINER* zone = m_board->GetArea( i );
if( !zone->IsOnCopperLayer() || zone->GetIsKeepout() )
continue;
int nc = zone->GetNet()->GetNodesCount();
if( nc == 0 )
{
msg.Printf( _( "Copper zone (net name %s): net has no pads connected." ),
GetChars( zone->GetNet()->GetNetname() ) );
m_reporter->Report( msg, REPORTER::RPT_WARNING );
++m_warningCount;
}
}
return true;
}
bool BOARD_NETLIST_UPDATER::deleteSinglePadNets()
{
int count = 0;
wxString netname;
wxString msg;
D_PAD* pad = NULL;
D_PAD* previouspad = NULL;
// We need the pad list, for next tests.
// padlist is the list of pads, sorted by netname.
m_board->BuildListOfNets();
if( m_isDryRun )
return false;
std::vector<D_PAD*> padlist = m_board->GetPads();
for( unsigned kk = 0; kk < padlist.size(); kk++ )
{
pad = padlist[kk];
if( pad->GetNetname().IsEmpty() )
continue;
if( netname != pad->GetNetname() ) // End of net
{
if( previouspad && count == 1 )
{
// First, see if we have a copper zone attached to this pad.
// If so, this is not really a single pad net
for( int ii = 0; ii < m_board->GetAreaCount(); ii++ )
{
ZONE_CONTAINER* zone = m_board->GetArea( ii );
if( !zone->IsOnCopperLayer() )
continue;
if( zone->GetIsKeepout() )
continue;
if( zone->GetNet() == previouspad->GetNet() )
{
count++;
break;
}
}
if( count == 1 ) // Really one pad, and nothing else
{
msg.Printf( _( "Remove single pad net %s." ),
GetChars( previouspad->GetNetname() ) );
m_reporter->Report( msg, REPORTER::RPT_ACTION );
msg.Printf( _( "Remove single pad net \"%s\" on \"%s\" pad '%s'\n" ),
GetChars( previouspad->GetNetname() ),
GetChars( previouspad->GetParent()->GetReference() ),
GetChars( previouspad->GetPadName() ) );
m_reporter->Report( msg, REPORTER::RPT_ACTION );
previouspad->SetNetCode( NETINFO_LIST::UNCONNECTED );
}
}
netname = pad->GetNetname();
count = 1;
}
else
{
count++;
}
previouspad = pad;
}
// Examine last pad
if( pad && count == 1 )
pad->SetNetCode( NETINFO_LIST::UNCONNECTED );
return true;
}
bool PCB_EDIT_FRAME::End_Zone( wxDC* DC )
{
ZONE_CONTAINER* zone = GetBoard()->m_CurrentZoneContour;
if( !zone )
return true;
// Validate the current outline:
if( zone->GetNumCorners() <= 2 ) // An outline must have 3 corners or more
{
Abort_Zone_Create_Outline( m_canvas, DC );
return true;
}
// Remove the last corner if is is at the same location as the prevoius corner
zone->m_Poly->RemoveNullSegments();
// Validate the current edge:
int icorner = zone->GetNumCorners() - 1;
if( zone->IsOnCopperLayer() )
{
if( Drc_On && m_drc->Drc( zone, icorner - 1 ) == BAD_DRC ) // we can't validate last edge
return false;
if( Drc_On && m_drc->Drc( zone, icorner ) == BAD_DRC ) // we can't validate the closing edge
{
DisplayError( this,
_( "DRC error: closing this area creates a drc error with an other area" ) );
m_canvas->MoveCursorToCrossHair();
return false;
}
}
zone->ClearFlags();
zone->DrawWhileCreateOutline( m_canvas, DC, GR_XOR );
m_canvas->SetMouseCapture( NULL, NULL );
// Undraw old drawings, because they can have important changes
int layer = zone->GetLayer();
GetBoard()->RedrawAreasOutlines( m_canvas, DC, GR_XOR, layer );
GetBoard()->RedrawFilledAreas( m_canvas, DC, GR_XOR, layer );
// Save initial zones configuration, for undo/redo, before adding new zone
s_AuxiliaryList.ClearListAndDeleteItems();
s_PickedList.ClearListAndDeleteItems();
SaveCopyOfZones(s_PickedList, GetBoard(), zone->GetNet(), zone->GetLayer() );
// Put new zone in list
if( !s_CurrentZone )
{
zone->m_Poly->CloseLastContour(); // Close the current corner list
GetBoard()->Add( zone );
GetBoard()->m_CurrentZoneContour = NULL;
// Add this zone in picked list, as new item
ITEM_PICKER picker( zone, UR_NEW );
s_PickedList.PushItem( picker );
}
else // Append this outline as a cutout to an existing zone
{
for( int ii = 0; ii < zone->GetNumCorners(); ii++ )
{
s_CurrentZone->AppendCorner( zone->GetCornerPosition( ii ) );
}
s_CurrentZone->m_Poly->CloseLastContour(); // Close the current corner list
zone->RemoveAllContours(); // All corners are copied in s_CurrentZone. Free corner list.
zone = s_CurrentZone;
}
s_AddCutoutToCurrentZone = false;
s_CurrentZone = NULL;
GetScreen()->SetCurItem( NULL ); // This outline can be deleted when merging outlines
// Combine zones if possible :
GetBoard()->OnAreaPolygonModified( &s_AuxiliaryList, zone );
// Redraw the real edge zone :
GetBoard()->RedrawAreasOutlines( m_canvas, DC, GR_OR, layer );
GetBoard()->RedrawFilledAreas( m_canvas, DC, GR_OR, layer );
int ii = GetBoard()->GetAreaIndex( zone ); // test if zone exists
if( ii < 0 )
zone = NULL; // was removed by combining zones
int error_count = GetBoard()->Test_Drc_Areas_Outlines_To_Areas_Outlines( zone, true );
if( error_count )
{
DisplayError( this, _( "Area: DRC outline error" ) );
}
UpdateCopyOfZonesList( s_PickedList, s_AuxiliaryList, GetBoard() );
SaveCopyInUndoList(s_PickedList, UR_UNSPECIFIED);
s_PickedList.ClearItemsList(); // s_ItemsListPicker is no more owner of picked items
OnModify();
return true;
}
/*
* This function starts a new track segment.
* If a new track segment is in progress, ends this current new segment,
* and created a new one.
*/
TRACK* PCB_EDIT_FRAME::Begin_Route( TRACK* aTrack, wxDC* aDC )
{
TRACK* TrackOnStartPoint = NULL;
int layerMask = GetLayerMask( GetScreen()->m_Active_Layer );
BOARD_CONNECTED_ITEM* LockPoint;
wxPoint pos = GetScreen()->GetCrossHairPosition();
if( aTrack == NULL ) // Starting a new track segment
{
m_canvas->SetMouseCapture( ShowNewTrackWhenMovingCursor, Abort_Create_Track );
// Prepare the undo command info
s_ItemsListPicker.ClearListAndDeleteItems(); // Should not be necessary, but...
GetBoard()->PushHighLight();
// erase old highlight
if( GetBoard()->IsHighLightNetON() )
HighLight( aDC );
g_CurrentTrackList.PushBack( new TRACK( GetBoard() ) );
g_CurrentTrackSegment->SetFlags( IS_NEW );
GetBoard()->SetHighLightNet( 0 );
// Search for a starting point of the new track, a track or pad
LockPoint = GetBoard()->GetLockPoint( pos, layerMask );
D_PAD* pad = NULL;
if( LockPoint ) // An item (pad or track) is found
{
if( LockPoint->Type() == PCB_PAD_T )
{
pad = (D_PAD*) LockPoint;
// A pad is found: put the starting point on pad center
pos = pad->GetPosition();
GetBoard()->SetHighLightNet( pad->GetNet() );
}
else // A track segment is found
{
TrackOnStartPoint = (TRACK*) LockPoint;
GetBoard()->SetHighLightNet( TrackOnStartPoint->GetNet() );
GetBoard()->CreateLockPoint( pos, TrackOnStartPoint, &s_ItemsListPicker );
}
}
else
{
// Not a starting point, but a filled zone area can exist. This is also a
// good starting point.
ZONE_CONTAINER* zone;
zone = GetBoard()->HitTestForAnyFilledArea( pos, GetScreen()-> m_Active_Layer );
if( zone )
GetBoard()->SetHighLightNet( zone->GetNet() );
}
D( g_CurrentTrackList.VerifyListIntegrity() );
BuildAirWiresTargetsList( LockPoint, wxPoint( 0, 0 ), true );
D( g_CurrentTrackList.VerifyListIntegrity() );
GetBoard()->HighLightON();
GetBoard()->DrawHighLight( m_canvas, aDC, GetBoard()->GetHighLightNetCode() );
// Display info about track Net class, and init track and vias sizes:
g_CurrentTrackSegment->SetNet( GetBoard()->GetHighLightNetCode() );
GetBoard()->SetCurrentNetClass( g_CurrentTrackSegment->GetNetClassName() );
g_CurrentTrackSegment->SetLayer( GetScreen()->m_Active_Layer );
g_CurrentTrackSegment->SetWidth( GetBoard()->GetCurrentTrackWidth() );
if( GetBoard()->GetDesignSettings().m_UseConnectedTrackWidth )
{
if( TrackOnStartPoint && TrackOnStartPoint->Type() == PCB_TRACE_T )
g_CurrentTrackSegment->SetWidth( TrackOnStartPoint->GetWidth());
}
g_CurrentTrackSegment->SetStart( pos );
g_CurrentTrackSegment->SetEnd( pos );
if( pad )
{
g_CurrentTrackSegment->m_PadsConnected.push_back( pad );
// Useful to display track length, if the pad has a die length:
g_CurrentTrackSegment->SetState( BEGIN_ONPAD, ON );
g_CurrentTrackSegment->start = pad;
}
if( g_TwoSegmentTrackBuild )
{
// Create 2nd segment
g_CurrentTrackList.PushBack( (TRACK*)g_CurrentTrackSegment->Clone() );
D( g_CurrentTrackList.VerifyListIntegrity(); );
g_CurrentTrackSegment->start = g_FirstTrackSegment;
g_FirstTrackSegment->end = g_CurrentTrackSegment;
g_FirstTrackSegment->SetState( BEGIN_ONPAD | END_ONPAD, OFF );
}