ConfigVehicleTypeWidget::ConfigVehicleTypeWidget(QWidget *parent) : ConfigTaskWidget(parent)
{
m_aircraft = new Ui_AircraftWidget();
m_aircraft->setupUi(this);
ExtensionSystem::PluginManager *pm = ExtensionSystem::PluginManager::instance();
Core::Internal::GeneralSettings *settings = pm->getObject<Core::Internal::GeneralSettings>();
if (!settings->useExpertMode()) {
m_aircraft->saveAircraftToRAM->setVisible(false);
}
ConfigGadgetFactory *configGadgetFactory = pm->getObject<ConfigGadgetFactory>();
connect(m_aircraft->vehicleSetupWizardButton, SIGNAL(clicked()), configGadgetFactory, SIGNAL(onOpenVehicleConfigurationWizard()));
SystemSettings *syssettings = SystemSettings::GetInstance(getObjectManager());
Q_ASSERT(syssettings);
m_aircraft->nameEdit->setMaxLength(syssettings->VEHICLENAME_NUMELEM);
addApplySaveButtons(m_aircraft->saveAircraftToRAM, m_aircraft->saveAircraftToSD);
addUAVObject("SystemSettings");
addUAVObject("MixerSettings");
addUAVObject("ActuatorSettings");
m_ffTuningInProgress = false;
m_ffTuningPhase = false;
// The order of the tabs is important since they correspond with the AirframCategory enum
m_aircraft->aircraftType->addTab(tr("Multirotor"));
m_aircraft->aircraftType->addTab(tr("Fixed Wing"));
m_aircraft->aircraftType->addTab(tr("Helicopter"));
m_aircraft->aircraftType->addTab(tr("Ground"));
m_aircraft->aircraftType->addTab(tr("Custom"));
// Connect aircraft type selection dropbox to callback function
connect(m_aircraft->aircraftType, SIGNAL(currentChanged(int)), this, SLOT(switchAirframeType(int)));
// Connect the three feed forward test checkboxes
connect(m_aircraft->ffTestBox1, SIGNAL(clicked(bool)), this, SLOT(enableFFTest()));
connect(m_aircraft->ffTestBox2, SIGNAL(clicked(bool)), this, SLOT(enableFFTest()));
connect(m_aircraft->ffTestBox3, SIGNAL(clicked(bool)), this, SLOT(enableFFTest()));
// Connect the help pushbutton
connect(m_aircraft->airframeHelp, SIGNAL(clicked()), this, SLOT(openHelp()));
refreshWidgetsValues();
// register FF widgets for dirty state management
addWidget(m_aircraft->feedForwardSlider);
addWidget(m_aircraft->accelTime);
addWidget(m_aircraft->decelTime);
addWidget(m_aircraft->maxAccelSlider);
addWidget(m_aircraft->ffTestBox1);
addWidget(m_aircraft->ffTestBox2);
addWidget(m_aircraft->ffTestBox3);
addWidget(m_aircraft->nameEdit);
disableMouseWheelEvents();
updateEnableControls();
}
ConfigCameraStabilizationWidget::ConfigCameraStabilizationWidget(QWidget *parent) : ConfigTaskWidget(parent)
{
ui = new Ui_CameraStabilizationWidget();
ui->setupUi(this);
addApplySaveButtons(ui->camerastabilizationSaveRAM, ui->camerastabilizationSaveSD);
ExtensionSystem::PluginManager *pm = ExtensionSystem::PluginManager::instance();
Core::Internal::GeneralSettings *settings = pm->getObject<Core::Internal::GeneralSettings>();
if (!settings->useExpertMode()) {
ui->camerastabilizationSaveRAM->setVisible(false);
}
// These widgets don't have direct relation to UAVObjects
// and need special processing
QComboBox *outputs[] = {
ui->rollChannel,
ui->pitchChannel,
ui->yawChannel,
};
const int NUM_OUTPUTS = sizeof(outputs) / sizeof(outputs[0]);
// Populate widgets with channel numbers
for (int i = 0; i < NUM_OUTPUTS; i++) {
outputs[i]->clear();
outputs[i]->addItem("None");
for (quint32 j = 0; j < ActuatorCommand::CHANNEL_NUMELEM; j++) {
outputs[i]->addItem(QString("Channel %1").arg(j + 1));
}
}
setWikiURL("Camera+Stabilisation+Configuration");
// Load UAVObjects to widget relations from UI file
// using objrelation dynamic property
autoLoadWidgets();
// Add some widgets to track their UI dirty state and handle smartsave
addWidget(ui->enableCameraStabilization);
addWidget(ui->rollChannel);
addWidget(ui->pitchChannel);
addWidget(ui->yawChannel);
// Add some UAVObjects to monitor their changes in addition to autoloaded ones.
// Note also that we want to reload some UAVObjects by "Reload" button and have
// to pass corresponding reload group numbers (defined also in objrelation property)
// to the montitor. We don't reload HwSettings (module enable state) but reload
// output channels.
QList<int> reloadGroups;
reloadGroups << 1;
addUAVObject("HwSettings");
addUAVObject("MixerSettings", &reloadGroups);
// To set special widgets to defaults when requested
connect(this, SIGNAL(defaultRequested(int)), this, SLOT(defaultRequestedSlot(int)));
disableMouseWheelEvents();
updateEnableControls();
}
ConfigVehicleTypeWidget::ConfigVehicleTypeWidget(QWidget *parent) : ConfigTaskWidget(parent)
{
m_aircraft = new Ui_AircraftWidget();
m_aircraft->setupUi(this);
ExtensionSystem::PluginManager *pm = ExtensionSystem::PluginManager::instance();
Core::Internal::GeneralSettings *settings = pm->getObject<Core::Internal::GeneralSettings>();
if (!settings->useExpertMode()) {
m_aircraft->saveAircraftToRAM->setVisible(false);
}
addApplySaveButtons(m_aircraft->saveAircraftToRAM, m_aircraft->saveAircraftToSD);
addUAVObject("SystemSettings");
addUAVObject("MixerSettings");
addUAVObject("ActuatorSettings");
ffTuningInProgress = false;
ffTuningPhase = false;
QStringList airframeTypes;
airframeTypes << "Fixed Wing" << "Multirotor" << "Helicopter" << "Ground" << "Custom";
m_aircraft->aircraftType->addItems(airframeTypes);
// Set default vehicle to MultiRotor
// m_aircraft->aircraftType->setCurrentIndex(3);
// Connect aircraft type selection dropbox to callback function
connect(m_aircraft->aircraftType, SIGNAL(currentIndexChanged(int)), this, SLOT(switchAirframeType(int)));
// Connect the three feed forward test checkboxes
connect(m_aircraft->ffTestBox1, SIGNAL(clicked(bool)), this, SLOT(enableFFTest()));
connect(m_aircraft->ffTestBox2, SIGNAL(clicked(bool)), this, SLOT(enableFFTest()));
connect(m_aircraft->ffTestBox3, SIGNAL(clicked(bool)), this, SLOT(enableFFTest()));
// Connect the help pushbutton
connect(m_aircraft->airframeHelp, SIGNAL(clicked()), this, SLOT(openHelp()));
refreshWidgetsValues();
// register widgets for dirty state management
addWidget(m_aircraft->aircraftType);
// register FF widgets for dirty state management
addWidget(m_aircraft->feedForwardSlider);
addWidget(m_aircraft->accelTime);
addWidget(m_aircraft->decelTime);
addWidget(m_aircraft->maxAccelSlider);
addWidget(m_aircraft->ffTestBox1);
addWidget(m_aircraft->ffTestBox2);
addWidget(m_aircraft->ffTestBox3);
disableMouseWheelEvents();
updateEnableControls();
}
ConfigCCHWWidget::ConfigCCHWWidget(QWidget *parent) : ConfigTaskWidget(parent)
{
m_telemetry = new Ui_CC_HW_Widget();
m_telemetry->setupUi(this);
ExtensionSystem::PluginManager *pm = ExtensionSystem::PluginManager::instance();
Core::Internal::GeneralSettings *settings = pm->getObject<Core::Internal::GeneralSettings>();
if (!settings->useExpertMode()) {
m_telemetry->saveTelemetryToRAM->setVisible(false);
}
UAVObjectUtilManager *utilMngr = pm->getObject<UAVObjectUtilManager>();
int id = utilMngr->getBoardModel();
switch (id) {
case 0x0101:
m_telemetry->label_2->setPixmap(QPixmap(":/uploader/images/deviceID-0101.svg"));
break;
case 0x0301:
m_telemetry->label_2->setPixmap(QPixmap(":/uploader/images/deviceID-0301.svg"));
break;
case 0x0401:
m_telemetry->label_2->setPixmap(QPixmap(":/configgadget/images/coptercontrol.svg"));
break;
case 0x0402:
m_telemetry->label_2->setPixmap(QPixmap(":/configgadget/images/coptercontrol.svg"));
break;
case 0x0201:
m_telemetry->label_2->setPixmap(QPixmap(":/uploader/images/deviceID-0201.svg"));
break;
default:
m_telemetry->label_2->setPixmap(QPixmap(":/configgadget/images/coptercontrol.svg"));
break;
}
addApplySaveButtons(m_telemetry->saveTelemetryToRAM, m_telemetry->saveTelemetryToSD);
addUAVObjectToWidgetRelation("HwSettings", "CC_FlexiPort", m_telemetry->cbFlexi);
addUAVObjectToWidgetRelation("HwSettings", "CC_MainPort", m_telemetry->cbTele);
addUAVObjectToWidgetRelation("HwSettings", "CC_RcvrPort", m_telemetry->cbRcvr);
addUAVObjectToWidgetRelation("HwSettings", "USB_HIDPort", m_telemetry->cbUsbHid);
addUAVObjectToWidgetRelation("HwSettings", "USB_VCPPort", m_telemetry->cbUsbVcp);
addUAVObjectToWidgetRelation("HwSettings", "TelemetrySpeed", m_telemetry->telemetrySpeed);
addUAVObjectToWidgetRelation("HwSettings", "GPSSpeed", m_telemetry->gpsSpeed);
addUAVObjectToWidgetRelation("HwSettings", "ComUsbBridgeSpeed", m_telemetry->comUsbBridgeSpeed);
connect(m_telemetry->cchwHelp, SIGNAL(clicked()), this, SLOT(openHelp()));
enableSaveButtons(false);
populateWidgets();
refreshWidgetsValues();
forceConnectedState();
}
ConfigRevoNanoHWWidget::ConfigRevoNanoHWWidget(QWidget *parent) : ConfigTaskWidget(parent), m_refreshing(true)
{
m_ui = new Ui_RevoNanoHWWidget();
m_ui->setupUi(this);
ExtensionSystem::PluginManager *pm = ExtensionSystem::PluginManager::instance();
Core::Internal::GeneralSettings *settings = pm->getObject<Core::Internal::GeneralSettings>();
if (!settings->useExpertMode()) {
m_ui->saveTelemetryToRAM->setEnabled(false);
m_ui->saveTelemetryToRAM->setVisible(false);
}
addApplySaveButtons(m_ui->saveTelemetryToRAM, m_ui->saveTelemetryToSD);
forceConnectedState();
addWidgetBinding("HwSettings", "RM_FlexiPort", m_ui->cbFlexi);
addWidgetBinding("HwSettings", "RM_MainPort", m_ui->cbMain);
addWidgetBinding("HwSettings", "RM_RcvrPort", m_ui->cbRcvr, 0, 1, true);
addWidgetBinding("HwSettings", "USB_HIDPort", m_ui->cbUSBHIDFunction);
addWidgetBinding("HwSettings", "USB_VCPPort", m_ui->cbUSBVCPFunction);
addWidgetBinding("HwSettings", "ComUsbBridgeSpeed", m_ui->cbUSBVCPSpeed);
addWidgetBinding("HwSettings", "TelemetrySpeed", m_ui->cbFlexiTelemSpeed);
addWidgetBinding("HwSettings", "GPSSpeed", m_ui->cbFlexiGPSSpeed);
addWidgetBinding("HwSettings", "ComUsbBridgeSpeed", m_ui->cbFlexiComSpeed);
addWidgetBinding("HwSettings", "TelemetrySpeed", m_ui->cbMainTelemSpeed);
addWidgetBinding("HwSettings", "GPSSpeed", m_ui->cbMainGPSSpeed);
addWidgetBinding("HwSettings", "ComUsbBridgeSpeed", m_ui->cbMainComSpeed);
addWidgetBinding("HwSettings", "TelemetrySpeed", m_ui->cbRcvrTelemSpeed);
addWidgetBinding("HwSettings", "ComUsbBridgeSpeed", m_ui->cbRcvrComSpeed);
// Add Gps protocol configuration
addWidgetBinding("GPSSettings", "DataProtocol", m_ui->cbMainGPSProtocol);
addWidgetBinding("GPSSettings", "DataProtocol", m_ui->cbFlexiGPSProtocol);
connect(m_ui->cchwHelp, SIGNAL(clicked()), this, SLOT(openHelp()));
setupCustomCombos();
enableControls(true);
populateWidgets();
refreshWidgetsValues();
setDirty(false);
m_refreshing = false;
}
void UsageTrackerPlugin::onAutopilotConnect()
{
Core::Internal::GeneralSettings *settings = getGeneralSettings();
if (settings->collectUsageData()) {
if (settings->showUsageDataDisclaimer()) {
QMessageBox message;
message.setWindowTitle(tr("Usage feedback"));
message.setIcon(QMessageBox::Information);
message.addButton(tr("Yes, count me in"), QMessageBox::AcceptRole);
message.addButton(tr("No, I will not help"), QMessageBox::RejectRole);
message.setText(tr("The NinjaPilot version of Openpilot GCS has a function to collect limited anonymous information about "
"the usage of the application itself and the OpenPilot hardware connected to it.<p>"
"The intention is to not include anything that can be considered sensitive "
"or a threat to the users integrity. The collected information will be sent "
"using a secure protocol to an OpenPilot web service and stored in a database "
"for later analysis and statistical purposes.<br>"
"No information will be sold or given to any third party. The sole purpose is "
"to collect statistics about the usage of our software and hardware to enable us "
"to make things better for you.<p>"
"The following things are collected:<ul>"
"<li>Bootloader version</li>"
"<li>Firmware version, tag and git hash</li>"
"<li>OP Hardware type, revision and mcu serial number</li>"
"<li>Selected configuration parameters</li>"
"<li>GCS version</li>"
"<li>Operating system version and architecture</li>"
"<li>Current local time</li></ul>"
"The information is collected only at the time when a board is connecting to GCS.<p>"
"It is possible to enable or disable this functionality in the general "
"settings part of the options for the GCS application at any time.<p>"
"We need your help, with your feedback we know where to improve things and what "
"platforms are in use. This is a community project that depends on people being involved.<br>"
"Thank You for helping us making things better and for supporting OpenPilot!"));
QCheckBox *disclaimerCb = new QCheckBox(tr("&Don't show this message again."));
disclaimerCb->setChecked(true);
message.setCheckBox(disclaimerCb);
if (message.exec() != QMessageBox::AcceptRole) {
settings->setCollectUsageData(false);
settings->setShowUsageDataDisclaimer(!message.checkBox()->isChecked());
return;
} else {
settings->setCollectUsageData(true);
settings->setShowUsageDataDisclaimer(!message.checkBox()->isChecked());
}
}
QTimer::singleShot(1000, this, SLOT(trackUsage()));
}
}
ConfigOutputWidget::ConfigOutputWidget(QWidget *parent) : ConfigTaskWidget(parent)
{
m_ui = new Ui_OutputWidget();
m_ui->setupUi(this);
m_ui->gvFrame->setVisible(false);
ExtensionSystem::PluginManager *pm = ExtensionSystem::PluginManager::instance();
Core::Internal::GeneralSettings *settings = pm->getObject<Core::Internal::GeneralSettings>();
if (!settings->useExpertMode()) {
m_ui->saveRCOutputToRAM->setVisible(false);
}
UAVSettingsImportExportFactory *importexportplugin = pm->getObject<UAVSettingsImportExportFactory>();
connect(importexportplugin, SIGNAL(importAboutToBegin()), this, SLOT(stopTests()));
connect(m_ui->channelOutTest, SIGNAL(clicked(bool)), this, SLOT(runChannelTests(bool)));
// Configure the task widget
// Connect the help button
connect(m_ui->outputHelp, SIGNAL(clicked()), this, SLOT(openHelp()));
addApplySaveButtons(m_ui->saveRCOutputToRAM, m_ui->saveRCOutputToSD);
// Track the ActuatorSettings object
addUAVObject("ActuatorSettings");
// NOTE: we have channel indices from 0 to 9, but the convention for OP is Channel 1 to Channel 10.
// Register for ActuatorSettings changes:
for (unsigned int i = 0; i < ActuatorCommand::CHANNEL_NUMELEM; i++) {
OutputChannelForm *form = new OutputChannelForm(i, this);
form->moveTo(*(m_ui->channelLayout));
connect(m_ui->channelOutTest, SIGNAL(toggled(bool)), form, SLOT(enableChannelTest(bool)));
connect(form, SIGNAL(channelChanged(int, int)), this, SLOT(sendChannelTest(int, int)));
addWidget(form->ui.actuatorMin);
addWidget(form->ui.actuatorNeutral);
addWidget(form->ui.actuatorMax);
addWidget(form->ui.actuatorRev);
addWidget(form->ui.actuatorLink);
}
// Associate the buttons with their UAVO fields
addWidget(m_ui->spinningArmed);
MixerSettings *mixer = MixerSettings::GetInstance(getObjectManager());
Q_ASSERT(mixer);
m_banks << OutputBankControls(mixer, m_ui->chBank1, QColor("#C6ECAE"), m_ui->cb_outputRate1, m_ui->cb_outputMode1);
m_banks << OutputBankControls(mixer, m_ui->chBank2, QColor("#91E5D3"), m_ui->cb_outputRate2, m_ui->cb_outputMode2);
m_banks << OutputBankControls(mixer, m_ui->chBank3, QColor("#FCEC52"), m_ui->cb_outputRate3, m_ui->cb_outputMode3);
m_banks << OutputBankControls(mixer, m_ui->chBank4, QColor("#C3A8FF"), m_ui->cb_outputRate4, m_ui->cb_outputMode4);
m_banks << OutputBankControls(mixer, m_ui->chBank5, QColor("#F7F7F2"), m_ui->cb_outputRate5, m_ui->cb_outputMode5);
m_banks << OutputBankControls(mixer, m_ui->chBank6, QColor("#FF9F51"), m_ui->cb_outputRate6, m_ui->cb_outputMode6);
QList<int> rates;
rates << 50 << 60 << 125 << 165 << 270 << 330 << 400 << 490;
int i = 0;
foreach(OutputBankControls controls, m_banks) {
addWidget(controls.rateCombo());
controls.rateCombo()->addItem(tr("-"), QVariant(0));
controls.rateCombo()->model()->setData(controls.rateCombo()->model()->index(0, 0), QVariant(0), Qt::UserRole - 1);
foreach(int rate, rates) {
controls.rateCombo()->addItem(tr("%1 Hz").arg(rate), rate);
}
ConfigPipXtremeWidget::ConfigPipXtremeWidget(QWidget *parent) : ConfigTaskWidget(parent)
{
m_oplink = new Ui_OPLinkWidget();
m_oplink->setupUi(this);
// Connect to the OPLinkStatus object updates
ExtensionSystem::PluginManager *pm = ExtensionSystem::PluginManager::instance();
UAVObjectManager *objManager = pm->getObject<UAVObjectManager>();
oplinkStatusObj = dynamic_cast<UAVDataObject *>(objManager->getObject("OPLinkStatus"));
Q_ASSERT(oplinkStatusObj);
connect(oplinkStatusObj, SIGNAL(objectUpdated(UAVObject *)), this, SLOT(updateStatus(UAVObject *)));
// Connect to the OPLinkSettings object updates
oplinkSettingsObj = dynamic_cast<OPLinkSettings *>(objManager->getObject("OPLinkSettings"));
Q_ASSERT(oplinkSettingsObj);
connect(oplinkSettingsObj, SIGNAL(objectUpdated(UAVObject *)), this, SLOT(updateSettings(UAVObject *)));
Core::Internal::GeneralSettings *settings = pm->getObject<Core::Internal::GeneralSettings>();
if (!settings->useExpertMode()) {
m_oplink->Apply->setVisible(false);
}
addApplySaveButtons(m_oplink->Apply, m_oplink->Save);
addWidgetBinding("OPLinkSettings", "MainPort", m_oplink->MainPort);
addWidgetBinding("OPLinkSettings", "FlexiPort", m_oplink->FlexiPort);
addWidgetBinding("OPLinkSettings", "VCPPort", m_oplink->VCPPort);
addWidgetBinding("OPLinkSettings", "MaxRFPower", m_oplink->MaxRFTxPower);
addWidgetBinding("OPLinkSettings", "MinChannel", m_oplink->MinimumChannel);
addWidgetBinding("OPLinkSettings", "MaxChannel", m_oplink->MaximumChannel);
addWidgetBinding("OPLinkSettings", "ChannelSet", m_oplink->ChannelSet);
addWidgetBinding("OPLinkSettings", "CoordID", m_oplink->CoordID);
addWidgetBinding("OPLinkSettings", "Coordinator", m_oplink->Coordinator);
addWidgetBinding("OPLinkSettings", "OneWay", m_oplink->OneWayLink);
addWidgetBinding("OPLinkSettings", "PPMOnly", m_oplink->PPMOnly);
addWidgetBinding("OPLinkSettings", "PPM", m_oplink->PPM);
addWidgetBinding("OPLinkSettings", "ComSpeed", m_oplink->ComSpeed);
addWidgetBinding("OPLinkStatus", "DeviceID", m_oplink->DeviceID);
addWidgetBinding("OPLinkStatus", "RxGood", m_oplink->Good);
addWidgetBinding("OPLinkStatus", "RxCorrected", m_oplink->Corrected);
addWidgetBinding("OPLinkStatus", "RxErrors", m_oplink->Errors);
addWidgetBinding("OPLinkStatus", "RxMissed", m_oplink->Missed);
addWidgetBinding("OPLinkStatus", "RxFailure", m_oplink->RxFailure);
addWidgetBinding("OPLinkStatus", "UAVTalkErrors", m_oplink->UAVTalkErrors);
addWidgetBinding("OPLinkStatus", "TxDropped", m_oplink->Dropped);
addWidgetBinding("OPLinkStatus", "TxResent", m_oplink->Resent);
addWidgetBinding("OPLinkStatus", "TxFailure", m_oplink->TxFailure);
addWidgetBinding("OPLinkStatus", "Resets", m_oplink->Resets);
addWidgetBinding("OPLinkStatus", "Timeouts", m_oplink->Timeouts);
addWidgetBinding("OPLinkStatus", "RSSI", m_oplink->RSSI);
addWidgetBinding("OPLinkStatus", "HeapRemaining", m_oplink->FreeHeap);
addWidgetBinding("OPLinkStatus", "LinkQuality", m_oplink->LinkQuality);
addWidgetBinding("OPLinkStatus", "RXSeq", m_oplink->RXSeq);
addWidgetBinding("OPLinkStatus", "TXSeq", m_oplink->TXSeq);
addWidgetBinding("OPLinkStatus", "RXRate", m_oplink->RXRate);
addWidgetBinding("OPLinkStatus", "TXRate", m_oplink->TXRate);
// Connect the bind buttons
connect(m_oplink->Bind1, SIGNAL(clicked()), this, SLOT(bind()));
connect(m_oplink->Bind2, SIGNAL(clicked()), this, SLOT(bind()));
connect(m_oplink->Bind3, SIGNAL(clicked()), this, SLOT(bind()));
connect(m_oplink->Bind4, SIGNAL(clicked()), this, SLOT(bind()));
// Connect the selection changed signals.
connect(m_oplink->PPMOnly, SIGNAL(toggled(bool)), this, SLOT(ppmOnlyChanged()));
// Request and update of the setting object.
settingsUpdated = false;
autoLoadWidgets();
disableMouseWheelEvents();
updateEnableControls();
}
ConfigCCHWWidget::ConfigCCHWWidget(QWidget *parent) : ConfigTaskWidget(parent)
{
m_telemetry = new Ui_CC_HW_Widget();
m_telemetry->setupUi(this);
ExtensionSystem::PluginManager *pm = ExtensionSystem::PluginManager::instance();
Core::Internal::GeneralSettings *settings = pm->getObject<Core::Internal::GeneralSettings>();
if (!settings->useExpertMode()) {
m_telemetry->saveTelemetryToRAM->setVisible(false);
}
UAVObjectUtilManager *utilMngr = pm->getObject<UAVObjectUtilManager>();
int id = utilMngr->getBoardModel();
switch (id) {
case 0x0101:
m_telemetry->label_2->setPixmap(QPixmap(":/uploader/images/deviceID-0101.svg"));
break;
case 0x0301:
m_telemetry->label_2->setPixmap(QPixmap(":/uploader/images/deviceID-0301.svg"));
break;
case 0x0401:
m_telemetry->label_2->setPixmap(QPixmap(":/configgadget/images/coptercontrol.svg"));
break;
case 0x0402:
m_telemetry->label_2->setPixmap(QPixmap(":/configgadget/images/coptercontrol.svg"));
break;
case 0x0201:
m_telemetry->label_2->setPixmap(QPixmap(":/uploader/images/deviceID-0201.svg"));
break;
default:
m_telemetry->label_2->setPixmap(QPixmap(":/configgadget/images/coptercontrol.svg"));
break;
}
addApplySaveButtons(m_telemetry->saveTelemetryToRAM, m_telemetry->saveTelemetryToSD);
addWidgetBinding("HwSettings", "CC_FlexiPort", m_telemetry->cbFlexi);
addWidgetBinding("HwSettings", "CC_MainPort", m_telemetry->cbTele);
addWidgetBinding("HwSettings", "CC_RcvrPort", m_telemetry->cbRcvr);
addWidgetBinding("HwSettings", "USB_HIDPort", m_telemetry->cbUsbHid);
addWidgetBinding("HwSettings", "USB_VCPPort", m_telemetry->cbUsbVcp);
addWidgetBinding("HwSettings", "TelemetrySpeed", m_telemetry->telemetrySpeed);
addWidgetBinding("HwSettings", "GPSSpeed", m_telemetry->gpsSpeed);
// Add Gps protocol configuration
HwSettings *hwSettings = HwSettings::GetInstance(getObjectManager());
HwSettings::DataFields hwSettingsData = hwSettings->getData();
if (hwSettingsData.OptionalModules[HwSettings::OPTIONALMODULES_GPS] != HwSettings::OPTIONALMODULES_ENABLED) {
m_telemetry->gpsProtocol->setEnabled(false);
m_telemetry->gpsProtocol->setToolTip(tr("Enable GPS module and reboot the board to be able to select GPS protocol"));
} else {
addWidgetBinding("GPSSettings", "DataProtocol", m_telemetry->gpsProtocol);
}
addWidgetBinding("HwSettings", "ComUsbBridgeSpeed", m_telemetry->comUsbBridgeSpeed);
connect(m_telemetry->cchwHelp, SIGNAL(clicked()), this, SLOT(openHelp()));
enableSaveButtons(false);
populateWidgets();
refreshWidgetsValues();
forceConnectedState();
}
ConfigStabilizationWidget::ConfigStabilizationWidget(QWidget *parent) : ConfigTaskWidget(parent),
boardModel(0), m_stabSettingsBankCount(0), m_currentStabSettingsBank(0)
{
ui = new Ui_StabilizationWidget();
ui->setupUi(this);
setupExpoPlot();
setupStabBanksGUI();
ExtensionSystem::PluginManager *pm = ExtensionSystem::PluginManager::instance();
Core::Internal::GeneralSettings *settings = pm->getObject<Core::Internal::GeneralSettings>();
if (!settings->useExpertMode()) {
ui->saveStabilizationToRAM_6->setVisible(false);
}
autoLoadWidgets();
realtimeUpdates = new QTimer(this);
connect(realtimeUpdates, SIGNAL(timeout()), this, SLOT(apply()));
connect(ui->realTimeUpdates_6, SIGNAL(toggled(bool)), this, SLOT(realtimeUpdatesSlot(bool)));
addWidget(ui->realTimeUpdates_6);
connect(ui->realTimeUpdates_8, SIGNAL(toggled(bool)), this, SLOT(realtimeUpdatesSlot(bool)));
addWidget(ui->realTimeUpdates_8);
connect(ui->realTimeUpdates_12, SIGNAL(toggled(bool)), this, SLOT(realtimeUpdatesSlot(bool)));
addWidget(ui->realTimeUpdates_12);
connect(ui->realTimeUpdates_7, SIGNAL(toggled(bool)), this, SLOT(realtimeUpdatesSlot(bool)));
addWidget(ui->realTimeUpdates_7);
connect(ui->checkBox_7, SIGNAL(toggled(bool)), this, SLOT(linkCheckBoxes(bool)));
addWidget(ui->checkBox_7);
connect(ui->checkBox_2, SIGNAL(toggled(bool)), this, SLOT(linkCheckBoxes(bool)));
addWidget(ui->checkBox_2);
connect(ui->checkBox_8, SIGNAL(toggled(bool)), this, SLOT(linkCheckBoxes(bool)));
addWidget(ui->checkBox_8);
connect(ui->checkBox_3, SIGNAL(toggled(bool)), this, SLOT(linkCheckBoxes(bool)));
addWidget(ui->checkBox_3);
addWidget(ui->pushButton_2);
addWidget(ui->pushButton_3);
addWidget(ui->pushButton_4);
addWidget(ui->pushButton_5);
addWidget(ui->pushButton_6);
addWidget(ui->pushButton_7);
addWidget(ui->pushButton_8);
addWidget(ui->pushButton_9);
addWidget(ui->pushButton_10);
addWidget(ui->pushButton_11);
addWidget(ui->pushButton_20);
addWidget(ui->pushButton_22);
addWidget(ui->pushButton_23);
addWidget(ui->basicResponsivenessGroupBox);
addWidget(ui->basicResponsivenessCheckBox);
connect(ui->basicResponsivenessCheckBox, SIGNAL(toggled(bool)), this, SLOT(linkCheckBoxes(bool)));
addWidget(ui->advancedResponsivenessGroupBox);
addWidget(ui->advancedResponsivenessCheckBox);
connect(ui->advancedResponsivenessCheckBox, SIGNAL(toggled(bool)), this, SLOT(linkCheckBoxes(bool)));
connect(ui->defaultThrottleCurveButton, SIGNAL(clicked()), this, SLOT(resetThrottleCurveToDefault()));
connect(ui->enableThrustPIDScalingCheckBox, SIGNAL(toggled(bool)), ui->ThrustPIDSource, SLOT(setEnabled(bool)));
connect(ui->enableThrustPIDScalingCheckBox, SIGNAL(toggled(bool)), ui->ThrustPIDTarget, SLOT(setEnabled(bool)));
connect(ui->enableThrustPIDScalingCheckBox, SIGNAL(toggled(bool)), ui->ThrustPIDAxis, SLOT(setEnabled(bool)));
connect(ui->enableThrustPIDScalingCheckBox, SIGNAL(toggled(bool)), ui->thrustPIDScalingCurve, SLOT(setEnabled(bool)));
ui->thrustPIDScalingCurve->setXAxisLabel(tr("Thrust"));
ui->thrustPIDScalingCurve->setYAxisLabel(tr("Scaling factor"));
ui->thrustPIDScalingCurve->setMin(-0.5);
ui->thrustPIDScalingCurve->setMax(0.5);
ui->thrustPIDScalingCurve->initLinearCurve(5, -0.25, 0.25);
connect(ui->thrustPIDScalingCurve, SIGNAL(curveUpdated()), this, SLOT(throttleCurveUpdated()));
addWidget(ui->defaultThrottleCurveButton);
addWidget(ui->enableThrustPIDScalingCheckBox);
addWidget(ui->thrustPIDScalingCurve);
addWidget(ui->thrustPIDScalingCurve);
connect(this, SIGNAL(widgetContentsChanged(QWidget *)), this, SLOT(processLinkedWidgets(QWidget *)));
connect(this, SIGNAL(autoPilotConnected()), this, SLOT(onBoardConnected()));
addWidget(ui->expoPlot);
connect(ui->expoSpinnerRoll, SIGNAL(valueChanged(int)), this, SLOT(replotExpoRoll(int)));
connect(ui->expoSpinnerPitch, SIGNAL(valueChanged(int)), this, SLOT(replotExpoPitch(int)));
connect(ui->expoSpinnerYaw, SIGNAL(valueChanged(int)), this, SLOT(replotExpoYaw(int)));
disableMouseWheelEvents();
updateEnableControls();
}
