void FOOTPRINT_EDIT_FRAME::OnCloseWindow( wxCloseEvent& Event ) { if( GetScreen()->IsModify() && GetBoard()->m_Modules ) { if( !HandleUnsavedChanges( this, _( "Save changes to footprint before closing?" ), [&]()->bool { return SaveFootprint( GetBoard()->m_Modules ); } ) ) { Event.Veto(); return; } } GetGalCanvas()->SetEventDispatcher( NULL ); GetGalCanvas()->StopDrawing(); // Do not show the layer manager during closing to avoid flicker // on some platforms (Windows) that generate useless redraw of items in // the Layer Manger m_auimgr.GetPane( "LayersManager" ).Show( false ); Clear_Pcb( false ); //close the editor Destroy(); }
void MainWindow::on_openDocument_triggered() { if (HandleUnsavedChanges()) { m_document->open(); } }
void MainWindow::on_newDocument_triggered() { if (HandleUnsavedChanges()) { m_document->createNew(); } }
void MainWindow::closeEvent(QCloseEvent *event) { if (HandleUnsavedChanges()) { event->accept(); } else { event->ignore(); } }
bool LIB_EDIT_FRAME::LoadComponentAndSelectLib( const LIB_ID& aLibId, int aUnit, int aConvert ) { if( GetScreen()->IsModify() && GetCurPart() ) { if( !HandleUnsavedChanges( this, _( "The current symbol has been modified. Save changes?" ), [&]()->bool { return saveCurrentPart(); } ) ) { return false; } } SelectActiveLibrary( aLibId.GetLibNickname() ); return LoadComponentFromCurrentLib( aLibId.GetLibItemName(), aUnit, aConvert ); }
void PL_EDITOR_FRAME::OnCloseWindow( wxCloseEvent& Event ) { if( GetScreen()->IsModify() ) { if( !HandleUnsavedChanges( this, _( "The current page layout has been modified. Save changes?" ), [&]()->bool { return saveCurrentPageLayout(); } ) ) { Event.Veto(); return; } } // do not show the window because we do not want any paint event Show( false ); // was: Pgm().SaveCurrentSetupValues( m_configSettings ); wxConfigSaveSetups( Kiface().KifaceSettings(), m_configSettings ); // On Linux, m_propertiesPagelayout must be destroyed // before deleting the main frame to avoid a crash when closing m_propertiesPagelayout->Destroy(); Destroy(); }
bool PCB_EDIT_FRAME::OpenProjectFiles( const std::vector<wxString>& aFileSet, int aCtl ) { // This is for python: if( aFileSet.size() != 1 ) { UTF8 msg = StrPrintf( "Pcbnew:%s() takes only a single filename", __func__ ); DisplayError( this, msg ); return false; } wxString fullFileName( aFileSet[0] ); // We insist on caller sending us an absolute path, if it does not, we say it's a bug. wxASSERT_MSG( wxFileName( fullFileName ).IsAbsolute(), wxT( "Path is not absolute!" ) ); std::unique_ptr<wxSingleInstanceChecker> lockFile = ::LockFile( fullFileName ); if( !lockFile ) { wxString msg = wxString::Format( _( "PCB file \"%s\" is already open." ), fullFileName ); DisplayError( this, msg ); return false; } if( GetScreen()->IsModify() && !GetBoard()->IsEmpty() ) { if( !HandleUnsavedChanges( this, _( "The current PCB has been modified. Save changes?" ), [&]()->bool { return SavePcbFile( GetBoard()->GetFileName(), CREATE_BACKUP_FILE ); } ) ) { return false; } } // Release the lock file, until the new file is actually loaded ReleaseFile(); wxFileName pro = fullFileName; pro.SetExt( ProjectFileExtension ); bool is_new = !wxFileName::IsFileReadable( fullFileName ); // If its a non-existent schematic and caller thinks it exists if( is_new && !( aCtl & KICTL_CREATE ) ) { // notify user that fullFileName does not exist, ask if user wants to create it. wxString ask = wxString::Format( _( "PCB \"%s\" does not exist. Do you wish to create it?" ), fullFileName ); if( !IsOK( this, ask ) ) return false; } Clear_Pcb( false ); // pass false since we prompted above for a modified board IO_MGR::PCB_FILE_T pluginType = plugin_type( fullFileName, aCtl ); bool converted = pluginType != IO_MGR::LEGACY && pluginType != IO_MGR::KICAD_SEXP; if( !converted ) { // PROJECT::SetProjectFullName() is an impactful function. It should only be // called under carefully considered circumstances. // The calling code should know not to ask me here to change projects unless // it knows what consequences that will have on other KIFACEs running and using // this same PROJECT. It can be very harmful if that calling code is stupid. Prj().SetProjectFullName( pro.GetFullPath() ); // load project settings before BOARD LoadProjectSettings(); } if( is_new ) { OnModify(); } else { BOARD* loadedBoard = 0; // it will be set to non-NULL if loaded OK PLUGIN::RELEASER pi( IO_MGR::PluginFind( pluginType ) ); // This will rename the file if there is an autosave and the user want to recover CheckForAutoSaveFile( fullFileName ); try { PROPERTIES props; char xbuf[30]; char ybuf[30]; // EAGLE_PLUGIN can use this info to center the BOARD, but it does not yet. sprintf( xbuf, "%d", GetPageSizeIU().x ); sprintf( ybuf, "%d", GetPageSizeIU().y ); props["page_width"] = xbuf; props["page_height"] = ybuf; #if USE_INSTRUMENTATION // measure the time to load a BOARD. unsigned startTime = GetRunningMicroSecs(); #endif loadedBoard = pi->Load( fullFileName, NULL, &props ); #if USE_INSTRUMENTATION unsigned stopTime = GetRunningMicroSecs(); printf( "PLUGIN::Load(): %u usecs\n", stopTime - startTime ); #endif } catch( const IO_ERROR& ioe ) { if( ioe.Problem() != wxT( "CANCEL" ) ) { wxString msg = wxString::Format( _( "Error loading board file:\n%s" ), fullFileName ); DisplayErrorMessage( this, msg, ioe.What() ); } return false; } // 6.0 TODO: some settings didn't make it into the board file in 5.1 so as not to // change the file format. For 5.1 we must copy them across from the config-initialized // board. BOARD_DESIGN_SETTINGS& bds = loadedBoard->m_designSettings; BOARD_DESIGN_SETTINGS& configBds = GetBoard()->GetDesignSettings(); bds.m_RequireCourtyards = configBds.m_RequireCourtyards; bds.m_ProhibitOverlappingCourtyards = configBds.m_ProhibitOverlappingCourtyards; bds.m_HoleToHoleMin = configBds.m_HoleToHoleMin; bds.m_LineThickness[LAYER_CLASS_OTHERS] = configBds.m_LineThickness[LAYER_CLASS_OTHERS]; bds.m_TextSize[LAYER_CLASS_OTHERS] = configBds.m_TextSize[LAYER_CLASS_OTHERS]; bds.m_TextThickness[LAYER_CLASS_OTHERS] = configBds.m_TextThickness[LAYER_CLASS_OTHERS]; std::copy( configBds.m_TextItalic, configBds.m_TextItalic + 4, bds.m_TextItalic ); std::copy( configBds.m_TextUpright, configBds.m_TextUpright + 4, bds.m_TextUpright ); bds.m_DiffPairDimensionsList = configBds.m_DiffPairDimensionsList; bds.m_CopperEdgeClearance = configBds.m_CopperEdgeClearance; SetBoard( loadedBoard ); // we should not ask PLUGINs to do these items: loadedBoard->BuildListOfNets(); loadedBoard->SynchronizeNetsAndNetClasses(); // If this is a legacy board then we set the copper edge clearance to 1/2 the edge-cut // line width (which was a legacy kludge for implementing edge clearances). if( bds.m_CopperEdgeClearance == Millimeter2iu( LEGACY_COPPEREDGECLEARANCE ) ) bds.SetCopperEdgeClearance( inferLegacyEdgeClearance( loadedBoard ) ); if( loadedBoard->IsModified() ) OnModify(); else GetScreen()->ClrModify(); if( pluginType == IO_MGR::LEGACY && loadedBoard->GetFileFormatVersionAtLoad() < LEGACY_BOARD_FILE_VERSION ) { DisplayInfoMessage( this, _( "This file was created by an older version of Pcbnew.\n" "It will be stored in the new file format when you save this file again." ) ); } } { wxFileName fn = fullFileName; if( converted ) fn.SetExt( PcbFileExtension ); wxString fname = fn.GetFullPath(); fname.Replace( WIN_STRING_DIR_SEP, UNIX_STRING_DIR_SEP ); GetBoard()->SetFileName( fname ); } // Lock the file newly opened: m_file_checker.reset( lockFile.release() ); if( !converted ) UpdateFileHistory( GetBoard()->GetFileName() ); // Rebuild the new pad list (for drc and ratsnet control ...) GetBoard()->m_Status_Pcb = 0; // Select netclass Default as current netclass (it always exists) SetCurrentNetClass( NETCLASS::Default ); // Rebuild list of nets (full ratsnest rebuild) Compile_Ratsnest( NULL, true ); GetBoard()->BuildConnectivity(); onBoardLoaded(); // Refresh the 3D view, if any EDA_3D_VIEWER* draw3DFrame = Get3DViewerFrame(); if( draw3DFrame ) draw3DFrame->NewDisplay(); #if 0 && defined(DEBUG) // Output the board object tree to stdout, but please run from command prompt: GetBoard()->Show( 0, std::cout ); #endif // from EDA_APPL which was first loaded BOARD only: { /* For an obscure reason the focus is lost after loading a board file * when starting up the process. * (seems due to the recreation of the layer manager after loading the file) * Give focus to main window and Drawpanel * must be done for these 2 windows (for an obscure reason ...) * Linux specific * This is more a workaround than a fix. */ SetFocus(); GetCanvas()->SetFocus(); } return true; }