void FOOTPRINT_EDIT_FRAME::OnCloseWindow( wxCloseEvent& Event )
{
if( GetScreen()->IsModify() && GetBoard()->m_Modules )
{
if( !HandleUnsavedChanges( this, _( "Save changes to footprint before closing?" ),
[&]()->bool { return SaveFootprint( GetBoard()->m_Modules ); } ) )
{
Event.Veto();
return;
}
}
GetGalCanvas()->SetEventDispatcher( NULL );
GetGalCanvas()->StopDrawing();
// Do not show the layer manager during closing to avoid flicker
// on some platforms (Windows) that generate useless redraw of items in
// the Layer Manger
m_auimgr.GetPane( "LayersManager" ).Show( false );
Clear_Pcb( false );
//close the editor
Destroy();
}
void MainWindow::on_openDocument_triggered()
{
if (HandleUnsavedChanges())
{
m_document->open();
}
}
void MainWindow::on_newDocument_triggered()
{
if (HandleUnsavedChanges())
{
m_document->createNew();
}
}
void MainWindow::closeEvent(QCloseEvent *event)
{
if (HandleUnsavedChanges())
{
event->accept();
}
else
{
event->ignore();
}
}
bool LIB_EDIT_FRAME::LoadComponentAndSelectLib( const LIB_ID& aLibId, int aUnit, int aConvert )
{
if( GetScreen()->IsModify() && GetCurPart() )
{
if( !HandleUnsavedChanges( this, _( "The current symbol has been modified. Save changes?" ),
[&]()->bool { return saveCurrentPart(); } ) )
{
return false;
}
}
SelectActiveLibrary( aLibId.GetLibNickname() );
return LoadComponentFromCurrentLib( aLibId.GetLibItemName(), aUnit, aConvert );
}
void PL_EDITOR_FRAME::OnCloseWindow( wxCloseEvent& Event )
{
if( GetScreen()->IsModify() )
{
if( !HandleUnsavedChanges( this,
_( "The current page layout has been modified. Save changes?" ),
[&]()->bool { return saveCurrentPageLayout(); } ) )
{
Event.Veto();
return;
}
}
// do not show the window because we do not want any paint event
Show( false );
// was: Pgm().SaveCurrentSetupValues( m_configSettings );
wxConfigSaveSetups( Kiface().KifaceSettings(), m_configSettings );
// On Linux, m_propertiesPagelayout must be destroyed
// before deleting the main frame to avoid a crash when closing
m_propertiesPagelayout->Destroy();
Destroy();
}
bool PCB_EDIT_FRAME::OpenProjectFiles( const std::vector<wxString>& aFileSet, int aCtl )
{
// This is for python:
if( aFileSet.size() != 1 )
{
UTF8 msg = StrPrintf( "Pcbnew:%s() takes only a single filename", __func__ );
DisplayError( this, msg );
return false;
}
wxString fullFileName( aFileSet[0] );
// We insist on caller sending us an absolute path, if it does not, we say it's a bug.
wxASSERT_MSG( wxFileName( fullFileName ).IsAbsolute(), wxT( "Path is not absolute!" ) );
std::unique_ptr<wxSingleInstanceChecker> lockFile = ::LockFile( fullFileName );
if( !lockFile )
{
wxString msg = wxString::Format( _( "PCB file \"%s\" is already open." ), fullFileName );
DisplayError( this, msg );
return false;
}
if( GetScreen()->IsModify() && !GetBoard()->IsEmpty() )
{
if( !HandleUnsavedChanges( this, _( "The current PCB has been modified. Save changes?" ),
[&]()->bool { return SavePcbFile( GetBoard()->GetFileName(), CREATE_BACKUP_FILE ); } ) )
{
return false;
}
}
// Release the lock file, until the new file is actually loaded
ReleaseFile();
wxFileName pro = fullFileName;
pro.SetExt( ProjectFileExtension );
bool is_new = !wxFileName::IsFileReadable( fullFileName );
// If its a non-existent schematic and caller thinks it exists
if( is_new && !( aCtl & KICTL_CREATE ) )
{
// notify user that fullFileName does not exist, ask if user wants to create it.
wxString ask = wxString::Format( _( "PCB \"%s\" does not exist. Do you wish to create it?" ),
fullFileName );
if( !IsOK( this, ask ) )
return false;
}
Clear_Pcb( false ); // pass false since we prompted above for a modified board
IO_MGR::PCB_FILE_T pluginType = plugin_type( fullFileName, aCtl );
bool converted = pluginType != IO_MGR::LEGACY && pluginType != IO_MGR::KICAD_SEXP;
if( !converted )
{
// PROJECT::SetProjectFullName() is an impactful function. It should only be
// called under carefully considered circumstances.
// The calling code should know not to ask me here to change projects unless
// it knows what consequences that will have on other KIFACEs running and using
// this same PROJECT. It can be very harmful if that calling code is stupid.
Prj().SetProjectFullName( pro.GetFullPath() );
// load project settings before BOARD
LoadProjectSettings();
}
if( is_new )
{
OnModify();
}
else
{
BOARD* loadedBoard = 0; // it will be set to non-NULL if loaded OK
PLUGIN::RELEASER pi( IO_MGR::PluginFind( pluginType ) );
// This will rename the file if there is an autosave and the user want to recover
CheckForAutoSaveFile( fullFileName );
try
{
PROPERTIES props;
char xbuf[30];
char ybuf[30];
// EAGLE_PLUGIN can use this info to center the BOARD, but it does not yet.
sprintf( xbuf, "%d", GetPageSizeIU().x );
sprintf( ybuf, "%d", GetPageSizeIU().y );
props["page_width"] = xbuf;
props["page_height"] = ybuf;
#if USE_INSTRUMENTATION
// measure the time to load a BOARD.
unsigned startTime = GetRunningMicroSecs();
#endif
loadedBoard = pi->Load( fullFileName, NULL, &props );
#if USE_INSTRUMENTATION
unsigned stopTime = GetRunningMicroSecs();
printf( "PLUGIN::Load(): %u usecs\n", stopTime - startTime );
#endif
}
catch( const IO_ERROR& ioe )
{
if( ioe.Problem() != wxT( "CANCEL" ) )
{
wxString msg = wxString::Format( _( "Error loading board file:\n%s" ), fullFileName );
DisplayErrorMessage( this, msg, ioe.What() );
}
return false;
}
// 6.0 TODO: some settings didn't make it into the board file in 5.1 so as not to
// change the file format. For 5.1 we must copy them across from the config-initialized
// board.
BOARD_DESIGN_SETTINGS& bds = loadedBoard->m_designSettings;
BOARD_DESIGN_SETTINGS& configBds = GetBoard()->GetDesignSettings();
bds.m_RequireCourtyards = configBds.m_RequireCourtyards;
bds.m_ProhibitOverlappingCourtyards = configBds.m_ProhibitOverlappingCourtyards;
bds.m_HoleToHoleMin = configBds.m_HoleToHoleMin;
bds.m_LineThickness[LAYER_CLASS_OTHERS] = configBds.m_LineThickness[LAYER_CLASS_OTHERS];
bds.m_TextSize[LAYER_CLASS_OTHERS] = configBds.m_TextSize[LAYER_CLASS_OTHERS];
bds.m_TextThickness[LAYER_CLASS_OTHERS] = configBds.m_TextThickness[LAYER_CLASS_OTHERS];
std::copy( configBds.m_TextItalic, configBds.m_TextItalic + 4, bds.m_TextItalic );
std::copy( configBds.m_TextUpright, configBds.m_TextUpright + 4, bds.m_TextUpright );
bds.m_DiffPairDimensionsList = configBds.m_DiffPairDimensionsList;
bds.m_CopperEdgeClearance = configBds.m_CopperEdgeClearance;
SetBoard( loadedBoard );
// we should not ask PLUGINs to do these items:
loadedBoard->BuildListOfNets();
loadedBoard->SynchronizeNetsAndNetClasses();
// If this is a legacy board then we set the copper edge clearance to 1/2 the edge-cut
// line width (which was a legacy kludge for implementing edge clearances).
if( bds.m_CopperEdgeClearance == Millimeter2iu( LEGACY_COPPEREDGECLEARANCE ) )
bds.SetCopperEdgeClearance( inferLegacyEdgeClearance( loadedBoard ) );
if( loadedBoard->IsModified() )
OnModify();
else
GetScreen()->ClrModify();
if( pluginType == IO_MGR::LEGACY &&
loadedBoard->GetFileFormatVersionAtLoad() < LEGACY_BOARD_FILE_VERSION )
{
DisplayInfoMessage( this,
_( "This file was created by an older version of Pcbnew.\n"
"It will be stored in the new file format when you save this file again." ) );
}
}
{
wxFileName fn = fullFileName;
if( converted )
fn.SetExt( PcbFileExtension );
wxString fname = fn.GetFullPath();
fname.Replace( WIN_STRING_DIR_SEP, UNIX_STRING_DIR_SEP );
GetBoard()->SetFileName( fname );
}
// Lock the file newly opened:
m_file_checker.reset( lockFile.release() );
if( !converted )
UpdateFileHistory( GetBoard()->GetFileName() );
// Rebuild the new pad list (for drc and ratsnet control ...)
GetBoard()->m_Status_Pcb = 0;
// Select netclass Default as current netclass (it always exists)
SetCurrentNetClass( NETCLASS::Default );
// Rebuild list of nets (full ratsnest rebuild)
Compile_Ratsnest( NULL, true );
GetBoard()->BuildConnectivity();
onBoardLoaded();
// Refresh the 3D view, if any
EDA_3D_VIEWER* draw3DFrame = Get3DViewerFrame();
if( draw3DFrame )
draw3DFrame->NewDisplay();
#if 0 && defined(DEBUG)
// Output the board object tree to stdout, but please run from command prompt:
GetBoard()->Show( 0, std::cout );
#endif
// from EDA_APPL which was first loaded BOARD only:
{
/* For an obscure reason the focus is lost after loading a board file
* when starting up the process.
* (seems due to the recreation of the layer manager after loading the file)
* Give focus to main window and Drawpanel
* must be done for these 2 windows (for an obscure reason ...)
* Linux specific
* This is more a workaround than a fix.
*/
SetFocus();
GetCanvas()->SetFocus();
}
return true;
}
