/********************************************************************* * @fn oadManagerHandleNoti * * @brief Handle Notifications and Indications. * * @return none */ static void oadManagerHandleNoti(attHandleValueNoti_t *pNoti) { if (pNoti->handle == oadManagerHandles[OAD_CHAR_IMG_IDENTIFY]) { #if (defined HAL_LCD && (HAL_LCD == TRUE)) uint16 ver = BUILD_UINT16(pNoti->value[0], pNoti->value[1]); uint8 userId[12] = "UserId "; osal_memcpy(&(userId[7]), &(pNoti->value[4]), 4); userId[11] = '\0'; if ( OAD_IMG_ID( ver ) == 0 ) { HalLcdWriteStringValueValue("ImgA Id", OAD_VER_NUM( ver ), 16, BUILD_UINT16(pNoti->value[2], pNoti->value[3]), 16, HAL_LCD_LINE_2); } else { HalLcdWriteStringValueValue("ImgB Id", OAD_VER_NUM( ver ), 16, BUILD_UINT16(pNoti->value[2], pNoti->value[3]), 16, HAL_LCD_LINE_2); } HalLcdWriteString((char*)userId, HAL_LCD_LINE_3); #endif } else if (pNoti->handle == oadManagerHandles[OAD_CHAR_IMG_BLOCK]) { oadBlkNum = BUILD_UINT16(pNoti->value[0], pNoti->value[1]); attWriteReq_t req; req.handle = oadManagerHandles[OAD_CHAR_IMG_BLOCK]; req.len = 2 + OAD_BLOCK_SIZE; req.sig = FALSE; req.cmd = TRUE; req.value[0] = LO_UINT16(oadBlkNum); req.value[1] = HI_UINT16(oadBlkNum); uint8 page = oadBlkNum / OAD_BLOCKS_PER_PAGE; uint16 oset = (oadBlkNum - (OAD_BLOCKS_PER_PAGE * page)) * OAD_BLOCK_SIZE; HalFlashRead(page+OAD_IMG_B_PAGE, oset, req.value+2, OAD_BLOCK_SIZE); #if (defined HAL_LCD) && (HAL_LCD == TRUE) if (oadBlkNum == 0) { HalLcdWriteString("", HAL_LCD_LINE_3); } HalLcdDisplayPercentBar( "OAD Progress...", (oadBlkNum / (oadBlkTot / 100)) ); #endif VOID GATT_WriteNoRsp(oadManagerConnHandle, &req); VOID osal_start_timerEx( oadManagerTaskId, OAD_DOWNLOAD_EVT, OAD_DOWNLOAD_TIMEOUT ); } }
/********************************************************************* * @fn SimpleBLEPeripheral_Init * * @brief Initialization function for the Simple BLE Peripheral App Task. * This is called during initialization and should contain * any application specific initialization (ie. hardware * initialization/setup, table initialization, power up * notificaiton ... ). * * @param task_id - the ID assigned by OSAL. This ID should be * used to send messages and set timers. * * @return none */ void SimpleBLEPeripheral_Init( uint8 task_id ) { HCI_EXT_SetTxPowerCmd(LL_EXT_TX_POWER_MINUS_6_DBM); simpleBLEPeripheral_TaskID = task_id; if(osal_snv_read(0xfe,1,&gMP)!=NV_OPER_FAILED){ advertData[29]=gMP; } // Setup the GAP VOID GAP_SetParamValue( TGAP_CONN_PAUSE_PERIPHERAL, DEFAULT_CONN_PAUSE_PERIPHERAL );//连接间隙 // Setup the GAP Peripheral Role Profile { #if defined( CC2540_MINIDK ) // For the CC2540DK-MINI keyfob, device doesn't start advertising until button is pressed uint8 initial_advertising_enable = FALSE; #else // For other hardware platforms, device starts advertising upon initialization uint8 initial_advertising_enable = TRUE; #endif // By setting this to zero, the device will go into the waiting state after // being discoverable for 30.72 second, and will not being advertising again // until the enabler is set back to TRUE uint16 gapRole_AdvertOffTime = 0; uint8 enable_update_request = DEFAULT_ENABLE_UPDATE_REQUEST; uint16 desired_min_interval = DEFAULT_DESIRED_MIN_CONN_INTERVAL; uint16 desired_max_interval = DEFAULT_DESIRED_MAX_CONN_INTERVAL; uint16 desired_slave_latency = DEFAULT_DESIRED_SLAVE_LATENCY; uint16 desired_conn_timeout = DEFAULT_DESIRED_CONN_TIMEOUT; uint16 desired_rssi_rate=DEFAULT_DESIRED_REEI_RATE; // Set the GAP Role Parameters GAPRole_SetParameter( GAPROLE_ADVERT_ENABLED, sizeof( uint8 ), &initial_advertising_enable ); //GAPRole_SetParameter( GAPROLE_ADVERT_OFF_TIME, sizeof( uint16 ), &gapRole_AdvertOffTime ); GAPRole_SetParameter( GAPROLE_SCAN_RSP_DATA, sizeof ( scanRspData ), scanRspData ); GAPRole_SetParameter( GAPROLE_ADVERT_DATA, sizeof( advertData ), advertData ); GAPRole_SetParameter(GAPROLE_RSSI_READ_RATE,sizeof(uint16),&desired_rssi_rate);//设定RSSI的参数值 GAPRole_SetParameter( GAPROLE_PARAM_UPDATE_ENABLE, sizeof( uint8 ), &enable_update_request ); GAPRole_SetParameter( GAPROLE_MIN_CONN_INTERVAL, sizeof( uint16 ), &desired_min_interval ); GAPRole_SetParameter( GAPROLE_MAX_CONN_INTERVAL, sizeof( uint16 ), &desired_max_interval ); GAPRole_SetParameter( GAPROLE_SLAVE_LATENCY, sizeof( uint16 ), &desired_slave_latency ); GAPRole_SetParameter( GAPROLE_TIMEOUT_MULTIPLIER, sizeof( uint16 ), &desired_conn_timeout ); } // Set the GAP Characteristics GGS_SetParameter( GGS_DEVICE_NAME_ATT, GAP_DEVICE_NAME_LEN, attDeviceName ); // Set advertising interval { uint16 advInt = DEFAULT_ADVERTISING_INTERVAL; GAP_SetParamValue( TGAP_LIM_DISC_ADV_INT_MIN, advInt ); GAP_SetParamValue( TGAP_LIM_DISC_ADV_INT_MAX, advInt ); GAP_SetParamValue( TGAP_GEN_DISC_ADV_INT_MIN, advInt ); GAP_SetParamValue( TGAP_GEN_DISC_ADV_INT_MAX, advInt ); } // Setup the GAP Bond Manager { uint32 passkey = 0; // passkey "000000" uint8 pairMode = GAPBOND_PAIRING_MODE_WAIT_FOR_REQ; uint8 mitm = TRUE; uint8 ioCap = GAPBOND_IO_CAP_DISPLAY_ONLY; uint8 bonding = TRUE; GAPBondMgr_SetParameter( GAPBOND_DEFAULT_PASSCODE, sizeof ( uint32 ), &passkey ); GAPBondMgr_SetParameter( GAPBOND_PAIRING_MODE, sizeof ( uint8 ), &pairMode ); GAPBondMgr_SetParameter( GAPBOND_MITM_PROTECTION, sizeof ( uint8 ), &mitm ); GAPBondMgr_SetParameter( GAPBOND_IO_CAPABILITIES, sizeof ( uint8 ), &ioCap ); GAPBondMgr_SetParameter( GAPBOND_BONDING_ENABLED, sizeof ( uint8 ), &bonding ); } // Initialize GATT attributes GGS_AddService( GATT_ALL_SERVICES ); // GAP GATTServApp_AddService( GATT_ALL_SERVICES ); // GATT attributes DevInfo_AddService(); // Device Information Service SimpleProfile_AddService( GATT_ALL_SERVICES ); // Simple GATT Profile #if defined FEATURE_OAD VOID OADTarget_AddService(); // OAD Profile #endif // Setup the SimpleProfile Characteristic Values { uint8 charValue1 = 1; uint8 charValue2 = 0; uint8 charValue3 = 3; uint8 charValue4 = 4; uint8 charValue5[SIMPLEPROFILE_CHAR5_LEN] = { 1, 2, 3, 4, 5 }; SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR1, sizeof ( uint8 ), &gMP ); SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR2, sizeof ( uint8 ), &charValue2 ); SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR3, sizeof ( uint8 ), &charValue3 ); SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR4, sizeof ( uint8 ), &charValue4 ); SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR5, SIMPLEPROFILE_CHAR5_LEN, charValue5 ); } #if defined( CC2540_MINIDK ) SK_AddService( GATT_ALL_SERVICES ); // Simple Keys Profile // Register for all key events - This app will handle all key events RegisterForKeys( simpleBLEPeripheral_TaskID ); // makes sure LEDs are off HalLedSet( (HAL_LED_1 | HAL_LED_2), HAL_LED_MODE_OFF ); // For keyfob board set GPIO pins into a power-optimized state // Note that there is still some leakage current from the buzzer, // accelerometer, LEDs, and buttons on the PCB. P0SEL = 0; // Configure Port 0 as GPIO P1SEL = 0; // Configure Port 1 as GPIO P2SEL = 0; // Configure Port 2 as GPIO P0DIR = 0xFC; // Port 0 pins P0.0 and P0.1 as input (buttons), // all others (P0.2-P0.7) as output P1DIR = 0xFF; // All port 1 pins (P1.0-P1.7) as output P2DIR = 0x1F; // All port 1 pins (P2.0-P2.4) as output P0 = 0x03; // All pins on port 0 to low except for P0.0 and P0.1 (buttons) P1 = 0; // All pins on port 1 to low P2 = 0; // All pins on port 2 to low #endif // #if defined( CC2540_MINIDK ) #if (defined HAL_LCD) && (HAL_LCD == TRUE) #if defined FEATURE_OAD #if defined (HAL_IMAGE_A) HalLcdWriteStringValue( "BLE Peri-A", OAD_VER_NUM( _imgHdr.ver ), 16, HAL_LCD_LINE_1 ); #else HalLcdWriteStringValue( "BLE Peri-B", OAD_VER_NUM( _imgHdr.ver ), 16, HAL_LCD_LINE_1 ); #endif // HAL_IMAGE_A #else HalLcdWriteString( "iBeacon", HAL_LCD_LINE_1 ); #endif // FEATURE_OAD #endif // (defined HAL_LCD) && (HAL_LCD == TRUE) // Register callback with SimpleGATTprofile VOID SimpleProfile_RegisterAppCBs( &simpleBLEPeripheral_SimpleProfileCBs ); // Enable clock divide on halt // This reduces active current while radio is active and CC254x MCU // is halted HCI_EXT_ClkDivOnHaltCmd( HCI_EXT_ENABLE_CLK_DIVIDE_ON_HALT ); #if defined ( DC_DC_P0_7 ) // Enable stack to toggle bypass control on TPS62730 (DC/DC converter) HCI_EXT_MapPmIoPortCmd( HCI_EXT_PM_IO_PORT_P0, HCI_EXT_PM_IO_PORT_PIN7 ); #endif // defined ( DC_DC_P0_7 ) // Setup a delayed profile startup osal_set_event( simpleBLEPeripheral_TaskID, SBP_START_DEVICE_EVT ); }
/********************************************************************* * @fn SimpleBLEPeripheral_Init * * @brief Initialization function for the Simple BLE Peripheral App Task. * This is called during initialization and should contain * any application specific initialization (ie. hardware * initialization/setup, table initialization, power up * notificaiton ... ). * * @param task_id - the ID assigned by OSAL. This ID should be * used to send messages and set timers. * * @return none */ void SimpleBLEPeripheral_Init( uint8 task_id ) { simpleBLEPeripheral_TaskID = task_id; // Setup the GAP VOID GAP_SetParamValue( TGAP_CONN_PAUSE_PERIPHERAL, DEFAULT_CONN_PAUSE_PERIPHERAL ); // Setup the GAP Peripheral Role Profile { #if defined( CC2540_MINIDK ) // For the CC2540DK-MINI keyfob, device doesn't start advertising until button is pressed uint8 initial_advertising_enable = FALSE; #else // For other hardware platforms, device starts advertising upon initialization uint8 initial_advertising_enable = TRUE; #endif // By setting this to zero, the device will go into the waiting state after // being discoverable for 30.72 second, and will not being advertising again // until the enabler is set back to TRUE uint16 gapRole_AdvertOffTime = 0; uint8 enable_update_request = DEFAULT_ENABLE_UPDATE_REQUEST; uint16 desired_min_interval = DEFAULT_DESIRED_MIN_CONN_INTERVAL; uint16 desired_max_interval = DEFAULT_DESIRED_MAX_CONN_INTERVAL; uint16 desired_slave_latency = DEFAULT_DESIRED_SLAVE_LATENCY; uint16 desired_conn_timeout = DEFAULT_DESIRED_CONN_TIMEOUT; // Set the GAP Role Parameters GAPRole_SetParameter( GAPROLE_ADVERT_ENABLED, sizeof( uint8 ), &initial_advertising_enable ); GAPRole_SetParameter( GAPROLE_ADVERT_OFF_TIME, sizeof( uint16 ), &gapRole_AdvertOffTime ); GAPRole_SetParameter( GAPROLE_SCAN_RSP_DATA, sizeof ( scanRspData ), scanRspData ); GAPRole_SetParameter( GAPROLE_ADVERT_DATA, sizeof( advertData ), advertData ); GAPRole_SetParameter( GAPROLE_PARAM_UPDATE_ENABLE, sizeof( uint8 ), &enable_update_request ); GAPRole_SetParameter( GAPROLE_MIN_CONN_INTERVAL, sizeof( uint16 ), &desired_min_interval ); GAPRole_SetParameter( GAPROLE_MAX_CONN_INTERVAL, sizeof( uint16 ), &desired_max_interval ); GAPRole_SetParameter( GAPROLE_SLAVE_LATENCY, sizeof( uint16 ), &desired_slave_latency ); GAPRole_SetParameter( GAPROLE_TIMEOUT_MULTIPLIER, sizeof( uint16 ), &desired_conn_timeout ); //ÉèÖÃRSSI »ñÈ¡ËÙÂÊ uint16 rssi_rate = RSSI_RATE; GAPRole_SetParameter(GAPROLE_RSSI_READ_RATE,sizeof(uint16),&rssi_rate); } // Set the GAP Characteristics GGS_SetParameter( GGS_DEVICE_NAME_ATT, GAP_DEVICE_NAME_LEN, attDeviceName ); // Set advertising interval { uint16 advInt = DEFAULT_ADVERTISING_INTERVAL; GAP_SetParamValue( TGAP_LIM_DISC_ADV_INT_MIN, advInt ); GAP_SetParamValue( TGAP_LIM_DISC_ADV_INT_MAX, advInt ); GAP_SetParamValue( TGAP_GEN_DISC_ADV_INT_MIN, advInt ); GAP_SetParamValue( TGAP_GEN_DISC_ADV_INT_MAX, advInt ); } // Setup the GAP Bond Manager { uint32 passkey = 0; // passkey "000000" uint8 pairMode = GAPBOND_PAIRING_MODE_WAIT_FOR_REQ; uint8 mitm = TRUE; uint8 ioCap = GAPBOND_IO_CAP_DISPLAY_ONLY; uint8 bonding = TRUE; GAPBondMgr_SetParameter( GAPBOND_DEFAULT_PASSCODE, sizeof ( uint32 ), &passkey ); GAPBondMgr_SetParameter( GAPBOND_PAIRING_MODE, sizeof ( uint8 ), &pairMode ); GAPBondMgr_SetParameter( GAPBOND_MITM_PROTECTION, sizeof ( uint8 ), &mitm ); GAPBondMgr_SetParameter( GAPBOND_IO_CAPABILITIES, sizeof ( uint8 ), &ioCap ); GAPBondMgr_SetParameter( GAPBOND_BONDING_ENABLED, sizeof ( uint8 ), &bonding ); } // Initialize GATT attributes Ìí¼ÓÁË4¸öService ·þÎñ GGS_AddService( GATT_ALL_SERVICES ); // GAP GATTServApp_AddService( GATT_ALL_SERVICES ); // GATT attributes DevInfo_AddService(); // Device Information Service SimpleProfile_AddService( GATT_ALL_SERVICES ); // Simple GATT Profile ankiÐèÒªÐ޸ĵķþÎñ #if defined FEATURE_OAD VOID OADTarget_AddService(); // OAD Profile #endif // Setup the SimpleProfile Characteristic Values { //³õʼ»¯±àÒë½øÈ¥µÄµÆ¹âÑÕÉ« uint8 charValue1[20] = {0, 1,255,100,100,255,255,255, 20,1,1,255,1,200, 20,100,100,20,100,10}; uint8 charValue2[20] = {20,1,1,20,1,1,20,1,250,20,1,250,20,1,250,20,1,250,1}; uint8 charValue3 = 3; uint8 charValue4 = 4; uint8 charValue5[SIMPLEPROFILE_CHAR5_LEN] = { 1, 2, 3, 4, 5 }; #if (defined HAL_LCD) && (HAL_LCD == TRUE) //´ÓÎļþÖжÁÈ¡ uint8 wirteTag = osal_snv_read(0x80,20,charValue1); osal_snv_read(0x95,20,charValue2); if( wirteTag == SUCCESS){ HalLcdWriteStringValue("read Ok",(uint16)wirteTag,10, HAL_LCD_LINE_6 ); }else{ HalLcdWriteStringValue("read failed",(uint16)wirteTag,10, HAL_LCD_LINE_6 ); //½øÐгõʼ»¯ wirteTag = osal_snv_write(0x80,20,charValue1); osal_snv_write(0x95,20,charValue1); if(wirteTag == SUCCESS){ HalLcdWriteStringValue( "init", (uint16)wirteTag, 10, HAL_LCD_LINE_7 ); }else{ HalLcdWriteStringValue("init failed", (uint16)wirteTag,10, HAL_LCD_LINE_7 ); } } #else if( osal_snv_read(0x80,20,charValue1) != SUCCESS){ //½øÐгõʼ»¯ //osal_snv_write(0x80,20,charValue1); //HalLcdWriteStringValue( "rece:", osal_snv_write(0x80,20,charValue1), 10, HAL_LCD_LINE_8 ); osal_snv_write(0x95,20,charValue2); } #endif // (defined HAL_LCD) && (HAL_LCD == TRUE) SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR1, 20, &charValue1 ); SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR2, 20, &charValue2 ); SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR3, sizeof ( uint8 ), &charValue3 ); //Ç°Ãæ3¾äÖ»ÊǶԶÔÏóÖµµÄÉèÖã¬Õâ¾ä´úÂë ½øÐÐÁË£¬ServiceµÄcharacteristicÉèÖã¬Process Client Characteristis Configuration Change SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR4, sizeof ( uint8 ), &charValue4 ); SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR5, SIMPLEPROFILE_CHAR5_LEN, charValue5 ); } #if defined( CC2540_MINIDK ) SK_AddService( GATT_ALL_SERVICES ); // Simple Keys Profile // Register for all key events - This app will handle all key events¡£ ×¢²á°´Å¥Ê¼þ£¬OSAL´¦Àí°´Å¥Ê¼þ RegisterForKeys( simpleBLEPeripheral_TaskID ); // makes sure LEDs are off HalLedSet( (HAL_LED_1 | HAL_LED_2), HAL_LED_MODE_OFF ); #endif // #if defined( CC2540_MINIDK ) #if (defined HAL_LCD) && (HAL_LCD == TRUE) #if defined FEATURE_OAD #if defined (HAL_IMAGE_A) HalLcdWriteStringValue( "BLE Peri-A", OAD_VER_NUM( _imgHdr.ver ), 16, HAL_LCD_LINE_1 ); #else HalLcdWriteStringValue( "BLE Peri-B", OAD_VER_NUM( _imgHdr.ver ), 16, HAL_LCD_LINE_1 ); #endif // HAL_IMAGE_A #else HalLcdWriteString( "BLE Peripheral", HAL_LCD_LINE_1 ); #endif // FEATURE_OAD #endif // (defined HAL_LCD) && (HAL_LCD == TRUE) // Register callback with SimpleGATTprofile // ¸Ã»Øµ÷±» simpleProfile_WriteAttrCB ·½·¨´¥·¢£¬simpleProfileCBs °üº¬´Ë·½·¨£¬ÔÚSimpleProfile_AddService µÄʱºò×¢²áµ½GATTÐÒéÕ»·þÎñÖÐ //Öµ¸Ä±äÖ®ºó£¬Í¨Öª PROFILES--->SimpleProfileCBs.simpleProfile_WriteAttrCB È»ºóÔÙ֪ͨAPP--->simpleBLEPeripheral_SimpleProfileCBs VOID SimpleProfile_RegisterAppCBs( &simpleBLEPeripheral_SimpleProfileCBs ); // Enable clock divide on halt // This reduces active current while radio is active and CC254x MCU // is halted //²»É¾³ý PWM²»Îȶ¨ //HCI_EXT_ClkDivOnHaltCmd( HCI_EXT_ENABLE_CLK_DIVIDE_ON_HALT ); #if defined ( DC_DC_P0_7 ) // Enable stack to toggle bypass control on TPS62730 (DC/DC converter) HCI_EXT_MapPmIoPortCmd( HCI_EXT_PM_IO_PORT_P0, HCI_EXT_PM_IO_PORT_PIN7 ); #endif // defined ( DC_DC_P0_7 ) // Setup a delayed profile startup ·¢ÆðBLEÁ¬½Ó³õʼ»¯Ïà¹Ø·þÎñ¡£ÏÂÃæ·½·¨¶Ô SBP_START_DEVICE_EVT ʼþ½øÐд¦Àí osal_set_event( simpleBLEPeripheral_TaskID, SBP_START_DEVICE_EVT ); }
/********************************************************************* * @fn SimpleBLEPeripheral_Init * * @brief Initialization function for the Simple BLE Peripheral App Task. * This is called during initialization and should contain * any application specific initialization (ie. hardware * initialization/setup, table initialization, power up * notificaiton ... ). * * @param task_id - the ID assigned by OSAL. This ID should be * used to send messages and set timers. * * @return none */ void SimpleBLEPeripheral_Init( uint8 task_id ) { simpleBLEPeripheral_TaskID = task_id; // Setup the GAP VOID GAP_SetParamValue( TGAP_CONN_PAUSE_PERIPHERAL, DEFAULT_CONN_PAUSE_PERIPHERAL ); // Setup the GAP Peripheral Role Profile { //first turn off advertisement uint8 initial_advertising_enable = TRUE; // By setting this to zero, the device will go into the waiting state after // being discoverable for 30.72 second, and will not being advertising again // until the enabler is set back to TRUE uint16 gapRole_AdvertOffTime = 0; uint8 enable_update_request = DEFAULT_ENABLE_UPDATE_REQUEST; uint16 desired_min_interval = DEFAULT_DESIRED_MIN_CONN_INTERVAL; uint16 desired_max_interval = DEFAULT_DESIRED_MAX_CONN_INTERVAL; uint16 desired_slave_latency = DEFAULT_DESIRED_SLAVE_LATENCY; uint16 desired_conn_timeout = DEFAULT_DESIRED_CONN_TIMEOUT; // Set the GAP Role Parameters GAPRole_SetParameter( GAPROLE_ADVERT_ENABLED, sizeof( uint8 ), &initial_advertising_enable ); GAPRole_SetParameter( GAPROLE_ADVERT_OFF_TIME, sizeof( uint16 ), &gapRole_AdvertOffTime ); GAPRole_SetParameter( GAPROLE_SCAN_RSP_DATA, sizeof ( scanRspData ), scanRspData ); GAPRole_SetParameter( GAPROLE_ADVERT_DATA, sizeof( advertData ), advertData ); GAPRole_SetParameter( GAPROLE_PARAM_UPDATE_ENABLE, sizeof( uint8 ), &enable_update_request ); GAPRole_SetParameter( GAPROLE_MIN_CONN_INTERVAL, sizeof( uint16 ), &desired_min_interval ); GAPRole_SetParameter( GAPROLE_MAX_CONN_INTERVAL, sizeof( uint16 ), &desired_max_interval ); GAPRole_SetParameter( GAPROLE_SLAVE_LATENCY, sizeof( uint16 ), &desired_slave_latency ); GAPRole_SetParameter( GAPROLE_TIMEOUT_MULTIPLIER, sizeof( uint16 ), &desired_conn_timeout ); } // Set the GAP Characteristics GGS_SetParameter( GGS_DEVICE_NAME_ATT, GAP_DEVICE_NAME_LEN, attDeviceName ); // Set advertising interval { uint16 advInt = DEFAULT_ADVERTISING_INTERVAL; GAP_SetParamValue( TGAP_LIM_DISC_ADV_INT_MIN, advInt ); GAP_SetParamValue( TGAP_LIM_DISC_ADV_INT_MAX, advInt ); GAP_SetParamValue( TGAP_GEN_DISC_ADV_INT_MIN, advInt ); GAP_SetParamValue( TGAP_GEN_DISC_ADV_INT_MAX, advInt ); } // Setup the GAP Bond Manager { uint32 passkey = 0; // passkey "000000" uint8 pairMode = GAPBOND_PAIRING_MODE_WAIT_FOR_REQ; uint8 mitm = TRUE; uint8 ioCap = GAPBOND_IO_CAP_DISPLAY_ONLY; uint8 bonding = TRUE; GAPBondMgr_SetParameter( GAPBOND_DEFAULT_PASSCODE, sizeof ( uint32 ), &passkey ); GAPBondMgr_SetParameter( GAPBOND_PAIRING_MODE, sizeof ( uint8 ), &pairMode ); GAPBondMgr_SetParameter( GAPBOND_MITM_PROTECTION, sizeof ( uint8 ), &mitm ); GAPBondMgr_SetParameter( GAPBOND_IO_CAPABILITIES, sizeof ( uint8 ), &ioCap ); GAPBondMgr_SetParameter( GAPBOND_BONDING_ENABLED, sizeof ( uint8 ), &bonding ); } // Initialize GATT attributes GGS_AddService( GATT_ALL_SERVICES ); // GAP GATTServApp_AddService( GATT_ALL_SERVICES ); // GATT attributes DevInfo_AddService(); // Device Information Service SimpleProfile_AddService( GATT_ALL_SERVICES ); // Simple GATT Profile #if defined FEATURE_OAD VOID OADTarget_AddService(); // OAD Profile #endif // Setup the SimpleProfile Characteristic Values { uint8 charValue1[SIMPLEPROFILE_CHAR1_LEN] = dB_DevID(0x0001) ; uint8 charValue2[SIMPLEPROFILE_CHAR2_LEN] ={0}; //uint8 charValue3 = 3; uint8 charValue4 = 4; uint8 charValue5[SIMPLEPROFILE_CHAR5_LEN] = {0}; SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR1, SIMPLEPROFILE_CHAR1_LEN, charValue1 ); SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR2, SIMPLEPROFILE_CHAR2_LEN, charValue2 ); //SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR3, sizeof ( uint8 ), &charValue3 ); SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR4, sizeof ( uint8 ), &charValue4 ); SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR5, SIMPLEPROFILE_CHAR5_LEN, charValue5 ); } #if defined (SERIAL_INTERFACE) UART_SEND_STRING( "BLE Peripheral\r\n", 16 ); #endif #if (defined HAL_LCD) && (HAL_LCD == TRUE) #if defined FEATURE_OAD #if defined (HAL_IMAGE_A) HalLcdWriteStringValue( "BLE Peri-A", OAD_VER_NUM( _imgHdr.ver ), 16, HAL_LCD_LINE_1 ); #else HalLcdWriteStringValue( "BLE Peri-B", OAD_VER_NUM( _imgHdr.ver ), 16, HAL_LCD_LINE_1 ); #endif // HAL_IMAGE_A #else HalLcdWriteString( "BLE Peripheral", HAL_LCD_LINE_1 ); #endif // FEATURE_OAD #endif // (defined HAL_LCD) && (HAL_LCD == TRUE) // Register callback with SimpleGATTprofile VOID SimpleProfile_RegisterAppCBs( &simpleBLEPeripheral_SimpleProfileCBs ); // Enable clock divide on halt // This reduces active current while radio is active and CC254x MCU // is halted HCI_EXT_ClkDivOnHaltCmd( HCI_EXT_ENABLE_CLK_DIVIDE_ON_HALT ); // Setup a delayed profile startup osal_set_event( simpleBLEPeripheral_TaskID, SBP_START_DEVICE_EVT ); //call in order to allow more CPU time for driver HCI_EXT_HaltDuringRfCmd(HCI_EXT_HALT_DURING_RF_DISABLE); // << Wayne >> << Clock >> ++ // Start clock update timer osal_start_timerEx( simpleBLEPeripheral_TaskID, SBP_CLOCK_UPDATE_EVT, DEFAULT_CLOCK_UPDATE_PERIOD ); // << Wayne >> << Clock >> -- // }