/*********************************************************************
* @fn oadManagerHandleNoti
*
* @brief Handle Notifications and Indications.
*
* @return none
*/
static void oadManagerHandleNoti(attHandleValueNoti_t *pNoti)
{
if (pNoti->handle == oadManagerHandles[OAD_CHAR_IMG_IDENTIFY])
{
#if (defined HAL_LCD && (HAL_LCD == TRUE))
uint16 ver = BUILD_UINT16(pNoti->value[0], pNoti->value[1]);
uint8 userId[12] = "UserId ";
osal_memcpy(&(userId[7]), &(pNoti->value[4]), 4);
userId[11] = '\0';
if ( OAD_IMG_ID( ver ) == 0 )
{
HalLcdWriteStringValueValue("ImgA Id", OAD_VER_NUM( ver ), 16,
BUILD_UINT16(pNoti->value[2], pNoti->value[3]), 16,
HAL_LCD_LINE_2);
}
else
{
HalLcdWriteStringValueValue("ImgB Id", OAD_VER_NUM( ver ), 16,
BUILD_UINT16(pNoti->value[2], pNoti->value[3]), 16,
HAL_LCD_LINE_2);
}
HalLcdWriteString((char*)userId, HAL_LCD_LINE_3);
#endif
}
else if (pNoti->handle == oadManagerHandles[OAD_CHAR_IMG_BLOCK])
{
oadBlkNum = BUILD_UINT16(pNoti->value[0], pNoti->value[1]);
attWriteReq_t req;
req.handle = oadManagerHandles[OAD_CHAR_IMG_BLOCK];
req.len = 2 + OAD_BLOCK_SIZE;
req.sig = FALSE;
req.cmd = TRUE;
req.value[0] = LO_UINT16(oadBlkNum);
req.value[1] = HI_UINT16(oadBlkNum);
uint8 page = oadBlkNum / OAD_BLOCKS_PER_PAGE;
uint16 oset = (oadBlkNum - (OAD_BLOCKS_PER_PAGE * page)) * OAD_BLOCK_SIZE;
HalFlashRead(page+OAD_IMG_B_PAGE, oset, req.value+2, OAD_BLOCK_SIZE);
#if (defined HAL_LCD) && (HAL_LCD == TRUE)
if (oadBlkNum == 0)
{
HalLcdWriteString("", HAL_LCD_LINE_3);
}
HalLcdDisplayPercentBar( "OAD Progress...", (oadBlkNum / (oadBlkTot / 100)) );
#endif
VOID GATT_WriteNoRsp(oadManagerConnHandle, &req);
VOID osal_start_timerEx( oadManagerTaskId, OAD_DOWNLOAD_EVT, OAD_DOWNLOAD_TIMEOUT );
}
}
/*********************************************************************
* @fn SimpleBLEPeripheral_Init
*
* @brief Initialization function for the Simple BLE Peripheral App Task.
* This is called during initialization and should contain
* any application specific initialization (ie. hardware
* initialization/setup, table initialization, power up
* notificaiton ... ).
*
* @param task_id - the ID assigned by OSAL. This ID should be
* used to send messages and set timers.
*
* @return none
*/
void SimpleBLEPeripheral_Init( uint8 task_id )
{
HCI_EXT_SetTxPowerCmd(LL_EXT_TX_POWER_MINUS_6_DBM);
simpleBLEPeripheral_TaskID = task_id;
if(osal_snv_read(0xfe,1,&gMP)!=NV_OPER_FAILED){
advertData[29]=gMP;
}
// Setup the GAP
VOID GAP_SetParamValue( TGAP_CONN_PAUSE_PERIPHERAL, DEFAULT_CONN_PAUSE_PERIPHERAL );//连接间隙
// Setup the GAP Peripheral Role Profile
{
#if defined( CC2540_MINIDK )
// For the CC2540DK-MINI keyfob, device doesn't start advertising until button is pressed
uint8 initial_advertising_enable = FALSE;
#else
// For other hardware platforms, device starts advertising upon initialization
uint8 initial_advertising_enable = TRUE;
#endif
// By setting this to zero, the device will go into the waiting state after
// being discoverable for 30.72 second, and will not being advertising again
// until the enabler is set back to TRUE
uint16 gapRole_AdvertOffTime = 0;
uint8 enable_update_request = DEFAULT_ENABLE_UPDATE_REQUEST;
uint16 desired_min_interval = DEFAULT_DESIRED_MIN_CONN_INTERVAL;
uint16 desired_max_interval = DEFAULT_DESIRED_MAX_CONN_INTERVAL;
uint16 desired_slave_latency = DEFAULT_DESIRED_SLAVE_LATENCY;
uint16 desired_conn_timeout = DEFAULT_DESIRED_CONN_TIMEOUT;
uint16 desired_rssi_rate=DEFAULT_DESIRED_REEI_RATE;
// Set the GAP Role Parameters
GAPRole_SetParameter( GAPROLE_ADVERT_ENABLED, sizeof( uint8 ), &initial_advertising_enable );
//GAPRole_SetParameter( GAPROLE_ADVERT_OFF_TIME, sizeof( uint16 ), &gapRole_AdvertOffTime );
GAPRole_SetParameter( GAPROLE_SCAN_RSP_DATA, sizeof ( scanRspData ), scanRspData );
GAPRole_SetParameter( GAPROLE_ADVERT_DATA, sizeof( advertData ), advertData );
GAPRole_SetParameter(GAPROLE_RSSI_READ_RATE,sizeof(uint16),&desired_rssi_rate);//设定RSSI的参数值
GAPRole_SetParameter( GAPROLE_PARAM_UPDATE_ENABLE, sizeof( uint8 ), &enable_update_request );
GAPRole_SetParameter( GAPROLE_MIN_CONN_INTERVAL, sizeof( uint16 ), &desired_min_interval );
GAPRole_SetParameter( GAPROLE_MAX_CONN_INTERVAL, sizeof( uint16 ), &desired_max_interval );
GAPRole_SetParameter( GAPROLE_SLAVE_LATENCY, sizeof( uint16 ), &desired_slave_latency );
GAPRole_SetParameter( GAPROLE_TIMEOUT_MULTIPLIER, sizeof( uint16 ), &desired_conn_timeout );
}
// Set the GAP Characteristics
GGS_SetParameter( GGS_DEVICE_NAME_ATT, GAP_DEVICE_NAME_LEN, attDeviceName );
// Set advertising interval
{
uint16 advInt = DEFAULT_ADVERTISING_INTERVAL;
GAP_SetParamValue( TGAP_LIM_DISC_ADV_INT_MIN, advInt );
GAP_SetParamValue( TGAP_LIM_DISC_ADV_INT_MAX, advInt );
GAP_SetParamValue( TGAP_GEN_DISC_ADV_INT_MIN, advInt );
GAP_SetParamValue( TGAP_GEN_DISC_ADV_INT_MAX, advInt );
}
// Setup the GAP Bond Manager
{
uint32 passkey = 0; // passkey "000000"
uint8 pairMode = GAPBOND_PAIRING_MODE_WAIT_FOR_REQ;
uint8 mitm = TRUE;
uint8 ioCap = GAPBOND_IO_CAP_DISPLAY_ONLY;
uint8 bonding = TRUE;
GAPBondMgr_SetParameter( GAPBOND_DEFAULT_PASSCODE, sizeof ( uint32 ), &passkey );
GAPBondMgr_SetParameter( GAPBOND_PAIRING_MODE, sizeof ( uint8 ), &pairMode );
GAPBondMgr_SetParameter( GAPBOND_MITM_PROTECTION, sizeof ( uint8 ), &mitm );
GAPBondMgr_SetParameter( GAPBOND_IO_CAPABILITIES, sizeof ( uint8 ), &ioCap );
GAPBondMgr_SetParameter( GAPBOND_BONDING_ENABLED, sizeof ( uint8 ), &bonding );
}
// Initialize GATT attributes
GGS_AddService( GATT_ALL_SERVICES ); // GAP
GATTServApp_AddService( GATT_ALL_SERVICES ); // GATT attributes
DevInfo_AddService(); // Device Information Service
SimpleProfile_AddService( GATT_ALL_SERVICES ); // Simple GATT Profile
#if defined FEATURE_OAD
VOID OADTarget_AddService(); // OAD Profile
#endif
// Setup the SimpleProfile Characteristic Values
{
uint8 charValue1 = 1;
uint8 charValue2 = 0;
uint8 charValue3 = 3;
uint8 charValue4 = 4;
uint8 charValue5[SIMPLEPROFILE_CHAR5_LEN] = { 1, 2, 3, 4, 5 };
SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR1, sizeof ( uint8 ), &gMP );
SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR2, sizeof ( uint8 ), &charValue2 );
SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR3, sizeof ( uint8 ), &charValue3 );
SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR4, sizeof ( uint8 ), &charValue4 );
SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR5, SIMPLEPROFILE_CHAR5_LEN, charValue5 );
}
#if defined( CC2540_MINIDK )
SK_AddService( GATT_ALL_SERVICES ); // Simple Keys Profile
// Register for all key events - This app will handle all key events
RegisterForKeys( simpleBLEPeripheral_TaskID );
// makes sure LEDs are off
HalLedSet( (HAL_LED_1 | HAL_LED_2), HAL_LED_MODE_OFF );
// For keyfob board set GPIO pins into a power-optimized state
// Note that there is still some leakage current from the buzzer,
// accelerometer, LEDs, and buttons on the PCB.
P0SEL = 0; // Configure Port 0 as GPIO
P1SEL = 0; // Configure Port 1 as GPIO
P2SEL = 0; // Configure Port 2 as GPIO
P0DIR = 0xFC; // Port 0 pins P0.0 and P0.1 as input (buttons),
// all others (P0.2-P0.7) as output
P1DIR = 0xFF; // All port 1 pins (P1.0-P1.7) as output
P2DIR = 0x1F; // All port 1 pins (P2.0-P2.4) as output
P0 = 0x03; // All pins on port 0 to low except for P0.0 and P0.1 (buttons)
P1 = 0; // All pins on port 1 to low
P2 = 0; // All pins on port 2 to low
#endif // #if defined( CC2540_MINIDK )
#if (defined HAL_LCD) && (HAL_LCD == TRUE)
#if defined FEATURE_OAD
#if defined (HAL_IMAGE_A)
HalLcdWriteStringValue( "BLE Peri-A", OAD_VER_NUM( _imgHdr.ver ), 16, HAL_LCD_LINE_1 );
#else
HalLcdWriteStringValue( "BLE Peri-B", OAD_VER_NUM( _imgHdr.ver ), 16, HAL_LCD_LINE_1 );
#endif // HAL_IMAGE_A
#else
HalLcdWriteString( "iBeacon", HAL_LCD_LINE_1 );
#endif // FEATURE_OAD
#endif // (defined HAL_LCD) && (HAL_LCD == TRUE)
// Register callback with SimpleGATTprofile
VOID SimpleProfile_RegisterAppCBs( &simpleBLEPeripheral_SimpleProfileCBs );
// Enable clock divide on halt
// This reduces active current while radio is active and CC254x MCU
// is halted
HCI_EXT_ClkDivOnHaltCmd( HCI_EXT_ENABLE_CLK_DIVIDE_ON_HALT );
#if defined ( DC_DC_P0_7 )
// Enable stack to toggle bypass control on TPS62730 (DC/DC converter)
HCI_EXT_MapPmIoPortCmd( HCI_EXT_PM_IO_PORT_P0, HCI_EXT_PM_IO_PORT_PIN7 );
#endif // defined ( DC_DC_P0_7 )
// Setup a delayed profile startup
osal_set_event( simpleBLEPeripheral_TaskID, SBP_START_DEVICE_EVT );
}
/*********************************************************************
* @fn SimpleBLEPeripheral_Init
*
* @brief Initialization function for the Simple BLE Peripheral App Task.
* This is called during initialization and should contain
* any application specific initialization (ie. hardware
* initialization/setup, table initialization, power up
* notificaiton ... ).
*
* @param task_id - the ID assigned by OSAL. This ID should be
* used to send messages and set timers.
*
* @return none
*/
void SimpleBLEPeripheral_Init( uint8 task_id )
{
simpleBLEPeripheral_TaskID = task_id;
// Setup the GAP
VOID GAP_SetParamValue( TGAP_CONN_PAUSE_PERIPHERAL, DEFAULT_CONN_PAUSE_PERIPHERAL );
// Setup the GAP Peripheral Role Profile
{
#if defined( CC2540_MINIDK )
// For the CC2540DK-MINI keyfob, device doesn't start advertising until button is pressed
uint8 initial_advertising_enable = FALSE;
#else
// For other hardware platforms, device starts advertising upon initialization
uint8 initial_advertising_enable = TRUE;
#endif
// By setting this to zero, the device will go into the waiting state after
// being discoverable for 30.72 second, and will not being advertising again
// until the enabler is set back to TRUE
uint16 gapRole_AdvertOffTime = 0;
uint8 enable_update_request = DEFAULT_ENABLE_UPDATE_REQUEST;
uint16 desired_min_interval = DEFAULT_DESIRED_MIN_CONN_INTERVAL;
uint16 desired_max_interval = DEFAULT_DESIRED_MAX_CONN_INTERVAL;
uint16 desired_slave_latency = DEFAULT_DESIRED_SLAVE_LATENCY;
uint16 desired_conn_timeout = DEFAULT_DESIRED_CONN_TIMEOUT;
// Set the GAP Role Parameters
GAPRole_SetParameter( GAPROLE_ADVERT_ENABLED, sizeof( uint8 ), &initial_advertising_enable );
GAPRole_SetParameter( GAPROLE_ADVERT_OFF_TIME, sizeof( uint16 ), &gapRole_AdvertOffTime );
GAPRole_SetParameter( GAPROLE_SCAN_RSP_DATA, sizeof ( scanRspData ), scanRspData );
GAPRole_SetParameter( GAPROLE_ADVERT_DATA, sizeof( advertData ), advertData );
GAPRole_SetParameter( GAPROLE_PARAM_UPDATE_ENABLE, sizeof( uint8 ), &enable_update_request );
GAPRole_SetParameter( GAPROLE_MIN_CONN_INTERVAL, sizeof( uint16 ), &desired_min_interval );
GAPRole_SetParameter( GAPROLE_MAX_CONN_INTERVAL, sizeof( uint16 ), &desired_max_interval );
GAPRole_SetParameter( GAPROLE_SLAVE_LATENCY, sizeof( uint16 ), &desired_slave_latency );
GAPRole_SetParameter( GAPROLE_TIMEOUT_MULTIPLIER, sizeof( uint16 ), &desired_conn_timeout );
//ÉèÖÃRSSI »ñÈ¡ËÙÂÊ
uint16 rssi_rate = RSSI_RATE;
GAPRole_SetParameter(GAPROLE_RSSI_READ_RATE,sizeof(uint16),&rssi_rate);
}
// Set the GAP Characteristics
GGS_SetParameter( GGS_DEVICE_NAME_ATT, GAP_DEVICE_NAME_LEN, attDeviceName );
// Set advertising interval
{
uint16 advInt = DEFAULT_ADVERTISING_INTERVAL;
GAP_SetParamValue( TGAP_LIM_DISC_ADV_INT_MIN, advInt );
GAP_SetParamValue( TGAP_LIM_DISC_ADV_INT_MAX, advInt );
GAP_SetParamValue( TGAP_GEN_DISC_ADV_INT_MIN, advInt );
GAP_SetParamValue( TGAP_GEN_DISC_ADV_INT_MAX, advInt );
}
// Setup the GAP Bond Manager
{
uint32 passkey = 0; // passkey "000000"
uint8 pairMode = GAPBOND_PAIRING_MODE_WAIT_FOR_REQ;
uint8 mitm = TRUE;
uint8 ioCap = GAPBOND_IO_CAP_DISPLAY_ONLY;
uint8 bonding = TRUE;
GAPBondMgr_SetParameter( GAPBOND_DEFAULT_PASSCODE, sizeof ( uint32 ), &passkey );
GAPBondMgr_SetParameter( GAPBOND_PAIRING_MODE, sizeof ( uint8 ), &pairMode );
GAPBondMgr_SetParameter( GAPBOND_MITM_PROTECTION, sizeof ( uint8 ), &mitm );
GAPBondMgr_SetParameter( GAPBOND_IO_CAPABILITIES, sizeof ( uint8 ), &ioCap );
GAPBondMgr_SetParameter( GAPBOND_BONDING_ENABLED, sizeof ( uint8 ), &bonding );
}
// Initialize GATT attributes Ìí¼ÓÁË4¸öService ·þÎñ
GGS_AddService( GATT_ALL_SERVICES ); // GAP
GATTServApp_AddService( GATT_ALL_SERVICES ); // GATT attributes
DevInfo_AddService(); // Device Information Service
SimpleProfile_AddService( GATT_ALL_SERVICES ); // Simple GATT Profile ankiÐèÒªÐ޸ĵķþÎñ
#if defined FEATURE_OAD
VOID OADTarget_AddService(); // OAD Profile
#endif
// Setup the SimpleProfile Characteristic Values
{
//³õʼ»¯±àÒë½øÈ¥µÄµÆ¹âÑÕÉ«
uint8 charValue1[20] = {0, 1,255,100,100,255,255,255, 20,1,1,255,1,200, 20,100,100,20,100,10};
uint8 charValue2[20] = {20,1,1,20,1,1,20,1,250,20,1,250,20,1,250,20,1,250,1};
uint8 charValue3 = 3;
uint8 charValue4 = 4;
uint8 charValue5[SIMPLEPROFILE_CHAR5_LEN] = { 1, 2, 3, 4, 5 };
#if (defined HAL_LCD) && (HAL_LCD == TRUE)
//´ÓÎļþÖжÁÈ¡
uint8 wirteTag = osal_snv_read(0x80,20,charValue1);
osal_snv_read(0x95,20,charValue2);
if( wirteTag == SUCCESS){
HalLcdWriteStringValue("read Ok",(uint16)wirteTag,10, HAL_LCD_LINE_6 );
}else{
HalLcdWriteStringValue("read failed",(uint16)wirteTag,10, HAL_LCD_LINE_6 );
//½øÐгõʼ»¯
wirteTag = osal_snv_write(0x80,20,charValue1);
osal_snv_write(0x95,20,charValue1);
if(wirteTag == SUCCESS){
HalLcdWriteStringValue( "init", (uint16)wirteTag, 10, HAL_LCD_LINE_7 );
}else{
HalLcdWriteStringValue("init failed", (uint16)wirteTag,10, HAL_LCD_LINE_7 );
}
}
#else
if( osal_snv_read(0x80,20,charValue1) != SUCCESS){
//½øÐгõʼ»¯
//osal_snv_write(0x80,20,charValue1);
//HalLcdWriteStringValue( "rece:", osal_snv_write(0x80,20,charValue1), 10, HAL_LCD_LINE_8 );
osal_snv_write(0x95,20,charValue2);
}
#endif // (defined HAL_LCD) && (HAL_LCD == TRUE)
SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR1, 20, &charValue1 );
SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR2, 20, &charValue2 );
SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR3, sizeof ( uint8 ), &charValue3 );
//Ç°Ãæ3¾äÖ»ÊǶԶÔÏóÖµµÄÉèÖã¬Õâ¾ä´úÂë ½øÐÐÁË£¬ServiceµÄcharacteristicÉèÖã¬Process Client Characteristis Configuration Change
SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR4, sizeof ( uint8 ), &charValue4 );
SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR5, SIMPLEPROFILE_CHAR5_LEN, charValue5 );
}
#if defined( CC2540_MINIDK )
SK_AddService( GATT_ALL_SERVICES ); // Simple Keys Profile
// Register for all key events - This app will handle all key events¡£ ×¢²á°´Å¥Ê¼þ£¬OSAL´¦Àí°´Å¥Ê¼þ
RegisterForKeys( simpleBLEPeripheral_TaskID );
// makes sure LEDs are off
HalLedSet( (HAL_LED_1 | HAL_LED_2), HAL_LED_MODE_OFF );
#endif // #if defined( CC2540_MINIDK )
#if (defined HAL_LCD) && (HAL_LCD == TRUE)
#if defined FEATURE_OAD
#if defined (HAL_IMAGE_A)
HalLcdWriteStringValue( "BLE Peri-A", OAD_VER_NUM( _imgHdr.ver ), 16, HAL_LCD_LINE_1 );
#else
HalLcdWriteStringValue( "BLE Peri-B", OAD_VER_NUM( _imgHdr.ver ), 16, HAL_LCD_LINE_1 );
#endif // HAL_IMAGE_A
#else
HalLcdWriteString( "BLE Peripheral", HAL_LCD_LINE_1 );
#endif // FEATURE_OAD
#endif // (defined HAL_LCD) && (HAL_LCD == TRUE)
// Register callback with SimpleGATTprofile
// ¸Ã»Øµ÷±» simpleProfile_WriteAttrCB ·½·¨´¥·¢£¬simpleProfileCBs °üº¬´Ë·½·¨£¬ÔÚSimpleProfile_AddService µÄʱºò×¢²áµ½GATTÐÒéÕ»·þÎñÖÐ
//Öµ¸Ä±äÖ®ºó£¬Í¨Öª PROFILES--->SimpleProfileCBs.simpleProfile_WriteAttrCB È»ºóÔÙ֪ͨAPP--->simpleBLEPeripheral_SimpleProfileCBs
VOID SimpleProfile_RegisterAppCBs( &simpleBLEPeripheral_SimpleProfileCBs );
// Enable clock divide on halt
// This reduces active current while radio is active and CC254x MCU
// is halted
//²»É¾³ý PWM²»Îȶ¨
//HCI_EXT_ClkDivOnHaltCmd( HCI_EXT_ENABLE_CLK_DIVIDE_ON_HALT );
#if defined ( DC_DC_P0_7 )
// Enable stack to toggle bypass control on TPS62730 (DC/DC converter)
HCI_EXT_MapPmIoPortCmd( HCI_EXT_PM_IO_PORT_P0, HCI_EXT_PM_IO_PORT_PIN7 );
#endif // defined ( DC_DC_P0_7 )
// Setup a delayed profile startup ·¢ÆðBLEÁ¬½Ó³õʼ»¯Ïà¹Ø·þÎñ¡£ÏÂÃæ·½·¨¶Ô SBP_START_DEVICE_EVT ʼþ½øÐд¦Àí
osal_set_event( simpleBLEPeripheral_TaskID, SBP_START_DEVICE_EVT );
}
/*********************************************************************
* @fn SimpleBLEPeripheral_Init
*
* @brief Initialization function for the Simple BLE Peripheral App Task.
* This is called during initialization and should contain
* any application specific initialization (ie. hardware
* initialization/setup, table initialization, power up
* notificaiton ... ).
*
* @param task_id - the ID assigned by OSAL. This ID should be
* used to send messages and set timers.
*
* @return none
*/
void SimpleBLEPeripheral_Init( uint8 task_id )
{
simpleBLEPeripheral_TaskID = task_id;
// Setup the GAP
VOID GAP_SetParamValue( TGAP_CONN_PAUSE_PERIPHERAL, DEFAULT_CONN_PAUSE_PERIPHERAL );
// Setup the GAP Peripheral Role Profile
{
//first turn off advertisement
uint8 initial_advertising_enable = TRUE;
// By setting this to zero, the device will go into the waiting state after
// being discoverable for 30.72 second, and will not being advertising again
// until the enabler is set back to TRUE
uint16 gapRole_AdvertOffTime = 0;
uint8 enable_update_request = DEFAULT_ENABLE_UPDATE_REQUEST;
uint16 desired_min_interval = DEFAULT_DESIRED_MIN_CONN_INTERVAL;
uint16 desired_max_interval = DEFAULT_DESIRED_MAX_CONN_INTERVAL;
uint16 desired_slave_latency = DEFAULT_DESIRED_SLAVE_LATENCY;
uint16 desired_conn_timeout = DEFAULT_DESIRED_CONN_TIMEOUT;
// Set the GAP Role Parameters
GAPRole_SetParameter( GAPROLE_ADVERT_ENABLED, sizeof( uint8 ), &initial_advertising_enable );
GAPRole_SetParameter( GAPROLE_ADVERT_OFF_TIME, sizeof( uint16 ), &gapRole_AdvertOffTime );
GAPRole_SetParameter( GAPROLE_SCAN_RSP_DATA, sizeof ( scanRspData ), scanRspData );
GAPRole_SetParameter( GAPROLE_ADVERT_DATA, sizeof( advertData ), advertData );
GAPRole_SetParameter( GAPROLE_PARAM_UPDATE_ENABLE, sizeof( uint8 ), &enable_update_request );
GAPRole_SetParameter( GAPROLE_MIN_CONN_INTERVAL, sizeof( uint16 ), &desired_min_interval );
GAPRole_SetParameter( GAPROLE_MAX_CONN_INTERVAL, sizeof( uint16 ), &desired_max_interval );
GAPRole_SetParameter( GAPROLE_SLAVE_LATENCY, sizeof( uint16 ), &desired_slave_latency );
GAPRole_SetParameter( GAPROLE_TIMEOUT_MULTIPLIER, sizeof( uint16 ), &desired_conn_timeout );
}
// Set the GAP Characteristics
GGS_SetParameter( GGS_DEVICE_NAME_ATT, GAP_DEVICE_NAME_LEN, attDeviceName );
// Set advertising interval
{
uint16 advInt = DEFAULT_ADVERTISING_INTERVAL;
GAP_SetParamValue( TGAP_LIM_DISC_ADV_INT_MIN, advInt );
GAP_SetParamValue( TGAP_LIM_DISC_ADV_INT_MAX, advInt );
GAP_SetParamValue( TGAP_GEN_DISC_ADV_INT_MIN, advInt );
GAP_SetParamValue( TGAP_GEN_DISC_ADV_INT_MAX, advInt );
}
// Setup the GAP Bond Manager
{
uint32 passkey = 0; // passkey "000000"
uint8 pairMode = GAPBOND_PAIRING_MODE_WAIT_FOR_REQ;
uint8 mitm = TRUE;
uint8 ioCap = GAPBOND_IO_CAP_DISPLAY_ONLY;
uint8 bonding = TRUE;
GAPBondMgr_SetParameter( GAPBOND_DEFAULT_PASSCODE, sizeof ( uint32 ), &passkey );
GAPBondMgr_SetParameter( GAPBOND_PAIRING_MODE, sizeof ( uint8 ), &pairMode );
GAPBondMgr_SetParameter( GAPBOND_MITM_PROTECTION, sizeof ( uint8 ), &mitm );
GAPBondMgr_SetParameter( GAPBOND_IO_CAPABILITIES, sizeof ( uint8 ), &ioCap );
GAPBondMgr_SetParameter( GAPBOND_BONDING_ENABLED, sizeof ( uint8 ), &bonding );
}
// Initialize GATT attributes
GGS_AddService( GATT_ALL_SERVICES ); // GAP
GATTServApp_AddService( GATT_ALL_SERVICES ); // GATT attributes
DevInfo_AddService(); // Device Information Service
SimpleProfile_AddService( GATT_ALL_SERVICES ); // Simple GATT Profile
#if defined FEATURE_OAD
VOID OADTarget_AddService(); // OAD Profile
#endif
// Setup the SimpleProfile Characteristic Values
{
uint8 charValue1[SIMPLEPROFILE_CHAR1_LEN] = dB_DevID(0x0001) ;
uint8 charValue2[SIMPLEPROFILE_CHAR2_LEN] ={0};
//uint8 charValue3 = 3;
uint8 charValue4 = 4;
uint8 charValue5[SIMPLEPROFILE_CHAR5_LEN] = {0};
SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR1, SIMPLEPROFILE_CHAR1_LEN, charValue1 );
SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR2, SIMPLEPROFILE_CHAR2_LEN, charValue2 );
//SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR3, sizeof ( uint8 ), &charValue3 );
SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR4, sizeof ( uint8 ), &charValue4 );
SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR5, SIMPLEPROFILE_CHAR5_LEN, charValue5 );
}
#if defined (SERIAL_INTERFACE)
UART_SEND_STRING( "BLE Peripheral\r\n", 16 );
#endif
#if (defined HAL_LCD) && (HAL_LCD == TRUE)
#if defined FEATURE_OAD
#if defined (HAL_IMAGE_A)
HalLcdWriteStringValue( "BLE Peri-A", OAD_VER_NUM( _imgHdr.ver ), 16, HAL_LCD_LINE_1 );
#else
HalLcdWriteStringValue( "BLE Peri-B", OAD_VER_NUM( _imgHdr.ver ), 16, HAL_LCD_LINE_1 );
#endif // HAL_IMAGE_A
#else
HalLcdWriteString( "BLE Peripheral", HAL_LCD_LINE_1 );
#endif // FEATURE_OAD
#endif // (defined HAL_LCD) && (HAL_LCD == TRUE)
// Register callback with SimpleGATTprofile
VOID SimpleProfile_RegisterAppCBs( &simpleBLEPeripheral_SimpleProfileCBs );
// Enable clock divide on halt
// This reduces active current while radio is active and CC254x MCU
// is halted
HCI_EXT_ClkDivOnHaltCmd( HCI_EXT_ENABLE_CLK_DIVIDE_ON_HALT );
// Setup a delayed profile startup
osal_set_event( simpleBLEPeripheral_TaskID, SBP_START_DEVICE_EVT );
//call in order to allow more CPU time for driver
HCI_EXT_HaltDuringRfCmd(HCI_EXT_HALT_DURING_RF_DISABLE);
// << Wayne >> << Clock >> ++
// Start clock update timer
osal_start_timerEx( simpleBLEPeripheral_TaskID, SBP_CLOCK_UPDATE_EVT, DEFAULT_CLOCK_UPDATE_PERIOD );
// << Wayne >> << Clock >> --
//
}
